class i d ip65 product data: warning iec 60598 ≥80ra · 2018. 1. 29. · iec 60598 model voltage...
TRANSCRIPT
LED Luminaires
Installation Manual
Performance:
The diffuser is made of Polycarbonate (PC) with a high lighting transmittance.
External housing is made of opaque PC withoutdoor mechanical performance.
This product is in compliance with EN60598-1and EN 60598-2-1
This Product is an IP 65 Waterproof Luminaireand is suitable for outdoor use where dust and moisture ingress may be an issue.
Safety Instruction:Electrical installation should be done by Licensed electrician only;
Never touch the lamp while the luminaries are switched on;
In case of failure, please switch off the powersupply;
The light source contained in this luminaireshall only be replaced by the manufacturer orhis service agent or a similar qualified person
Note:Do not make extra holes on the housing, usethe existing holes to avoid any warranty orwater ingress.
Product Data:
For Product information:
www.s-tech.com.au
Class I
D IP65
IEC60598
Model Voltage Power CCT CRI Lumen
WP-4FT-2-40-2C
WPE-4FT-2-40-2C
220-240V50/60Hz
220-240V50/60Hz
220-240V50/60Hz
220-240V50/60Hz
40W
40W
20W
10W
5000K
≥80Ra
≥80Ra
≥80Ra
≥80Ra
4000lm
4000lm
2000lm
1000lm
Parameter Tolerance:±10%
WP-4FT-1-20-2C5000K
WP-2FT-1-10-2C5000K
WARNING- Damage could result1. Only touch the metal plate, DO NOT touch any of the LED's or LED boards.2. Never remove the tray using internal wires, use an appropriate tool or tab to lift the tray.3. Do not stack internal panels or allow any solid objects to hit the LED's, terminals or drivers.
4000K
4000K
4000K
4000K
5000K
Product Size:
Exploded View:
Note: Please use a licensed electrician for all installations.1) Put the power cable through the cableentry into the housing,and then screw down
.
2) A:Regular Light Cable Connection Put the Brown power wire into L and the Blue power wire into N,the Yellow andGreen wire into Earth terminal.
N
L
W
H
1263
1263
1263
653
130 78 838 10
Model L(mm)
clipquantity
W(mm)
H(mm)
LF(mm)
L
LF
HookClip
Body
Driver
Diffuser
LED Module
Ø7-9mm
5) Open the clips
Double ModuleRotate the bracket by 90 degree by hand to disassemble the reflector.
Rotate the bracket by hand
WPE-4FT-2-40-2C
WP-4FT-1-20-2C
WP-2FT-1-10-2C
WP-4FT-2-40-2C
10
10
6
838
838
416
78
78
78
130
85
85
Reflector
Connecting the power cable
B:Emergency Light Cable Connection Put the Brown power wire into L and the Blue power wire into N,the Yellow andGreen wire into Earth terminal.
N
LL
INSW
INL:LIVE(non-switched)SWL:LIVE(switched)
Single Module
4)Mounting Types: There are two ways of mounting the lighting fixture :chain mount or ceiling mount.
A.chain mount B.ceiling mount
6) Disassemble the reflector.
3) LED color temperature options
5000K
4000K