cl&d sleeve worksheet · *note: always test a mock-up *note: 4mm graphic, varnish & ink...
TRANSCRIPT
Total Slit Width503mmTotal Print Width498mm
4mm
Gra
phic
, Var
nish
& In
k Fr
ee
Prin
t Are
a20
8.72
5mm
Cut
Hei
ght/R
epea
t21
2.72
5mmFold
Fold
Fold A Fold B
Text
Fre
e A
rea
104mm 151mm248mm LAYFLAT
Lay�at248mm
SD-00
Fold AFold B
NOT ACTUAL SIZE
CL&D Sleeve Worksheet
Sleeve Dimensions
Date: 12/3/2009 ................................................Customer: NBTY................................................Item: Sqat Eco Friendly Container OVER THE CAP Base Number: 10340 ........................................
Total slit width: 503mm ....................................Print width: 498mm ..........................................Lay�at: 248mm ................................................Art cut length/repeat: 212.725mm ....................Print height: 208.725mm ..................................Actual cut length (w/snapback:) 211.767mm ....Seam position: 40/60 ........................................Horizontal Perf, distance from top: ..................Vertical “T” Perf, distance from fold, L/R: ..........Vertical Perf, full length, distance from Left: .......... distance from Right: ..........Seam wound in/out: In ......................................
Lay�at x 2 + 7mm = Total slit widthTotal slit width - 5mm = Print widthSnapback = Print Cylinder Tooth Count x .000563Lay�at Estimate = Circumference / 1.908(Fine Tune Estimate based off existing items,application, cold foil, and mock-up performance.)*Note: Always test a mock-up*Note: 4mm graphic, varnish & ink free area to be on wider side of fold.
*Note: If machine applied, artwork must be centered in lay�at.
CL&D GRAPHICS1101 W. Second Street • Oconomowoc, WI 53066
262-569-4060 • 800-777-1114 www.cldgraphics.com
This design is the exclusive property of CL&D Graphics. It is con�dential and designed with the understanding that neither it nor any information contained there in will be copied, published or transmitted to others.
Revision 10.20.08 - Updated sleeve templateRevision 02.02.09 - Added box for layflat on templateRevision 02.09.09 - Added notes to template.Revision 07.06.09 - Added snapback, base number
213 mm
2 mmCLEAR
2 mmCLEAR
497 mm
5 mmCLEAR 61 mm 246 mm 185 mm
FOLD FOLD