clinical systems mounting reference guide … systems mounting reference guide (anesthesia products)...
TRANSCRIPT
Clinical SystemsMounting Reference Guide
(Anesthesia Products)
Double Clickon icon forlast update
Note: Due to product innovations, specifications contained herein are subject to change without notice. (Power and BTU ratings are approximate and based on 110VAC)
Device Height=cm(in) Width=cm(in) Depth=cm(in) Weight=kg(lb) BTU/hr Power=Watts Tramscope/Solar 7000 :Monochrome 31.1(12.3) 33.4(13.1) 39.9(15.7) 13.3(29.2) 409 120 :Color 31.1(12.3) 33.4(13.1) 55.2(21.7) 22(48.5) 680 200 Solar 8000 CPU/SolarView 8.1(3.2) 33.6(13.2) 34.9(13.7) 5.4(12) 167 50 Solar 8000M 8.1(3.2) 35.4(13.9) 33.4(13.3) 5.4(12) 198 58 Solar 9500 33.2(13.0) 34.8(13.7) 15.6(6.1) 9(19.8) 683 200 RAC2 11.9(4.7) 14.5(5.7) 31.2(12.3) 2.3(5) Depends on Modules Used RAC2A 11.9(4.7) 14.5(5.7) 34.3(13.5) 1.5(3.3) 119 35 RAC4A :w/o Power 22.9(9) 14.5(5.7) 33.5(13.2) 2.9(6.4) Depends on Modules Used :w/Power 22.9(9) 14.5(5.7) 38.4(15.1) 3.5(7.9) 238 70 Dash 1000/Eagle 1000 22.0(8.5) 26.2(10.3) 16.0(6.3) 2.0-4.4(4.4-9.7) 56-113 16.5-33 Dash 2000/3000 26.0(10.25) 28.0(11) 20.0(8) 5.1(11.2) 240max 75max Dash 4000 27.4(10.8) 29.3(11.5) 24.3(9.5) 5.5(12.2) 240max 75max Eagle 3000 24.1(9.5) 31.1(12.3) 21.6(8.5) 7.3(16) 500 147 Eagle 4000 (Color/Mono) 32.6(12.8) 32(12.5) 14.1(5.6) 7.3(16) 240 71 Flat Panel Displays: 15” Compaq (TFT5017) 38.6(15.1) 34.9(13.7) 14.7(5.8) 4(8.8) 154 45 15” Planar Flt Pnl Display 33.4(13.2) 40.7(16) 7.8(3.1) 4.9(10.7) 135 40 15” Totoku (CDL1531A-1A) 31.0(12.2) 39.8(15.7) 7.5(3) 4.7(10.4) 122 36 18” NEC LCD-18X0X (w/Base) 46.2(18.1) 45.4(17.9) 21.8(8.6) 8.4(18.5) 337 99 20” NEC LCD-20X0X (w/Base) 50.1(19.7) 49.8(19.6) 24.6(9.7) 11(24.3) 374 110 20” EIZO L771 (w/Base) 47.8(18.9) 47.2(18.6) 21.8 (8.6) 9.5(21) 177 53 CRTs: 10” Uniq Color Display 31.5(12.4) 24.5(9.7) 27.0(10.6) 6(13.2) 270 80 15” Conrac/MicroVitec MGD :w/Tilt/Swivel Base 35.9(14.1) 36(14.2) 39.9915.7) 14.3(31.5) 323 95 :/Adapter Plate 32.8(12.9) 36(14.2) 39.9(15.7) 14.3(31.5) 323 95 15” Compaq (S5500) 40(15.7) 36.5(14.4) 41.8(16.5) 13.2(29) 256 80 15” Compaq (V570) 36.9(14.5) 35.6(14) 37.9(14.9) 11.8(26.2) 240 75 15” Dell (E551) 38.7(15.3) 36.1(14.2) 38.4(15.1) 12.5(27.5) 15” Sony (CPD-100/110GS) 39.3(15.5) 36.8(14.5) 38.9(15.4) 14(31) 357 105 15” Sony (PGM-100P1MD) 34.3(13.6) 36.8(14.5) 39.1(15.5) 15(33) 442 130 15” Sony (CPD-E100) 37.8(14.9) 35.6(14) 38.7(15.3) 15(33) 323 95 17” Compaq (V720) 38.9(15.7) 41.2(16.2) 40(15.7) 18.7(41.2) 342 100 17” Compaq (V7550) 43.2(17) 40.9(16.1) 44.2(17.4) 19(41.8) 342 100 17” Dell (E771) 45.7(18) 41.2(16.2) 42.9(16.9) 16.5(36.4) 17” Sony (CPD-220GS) 43.2(17.1) 40.6(16) 42(16.7) 18(40) 409 120 17” Sony (CPD-E200/G200) 41.4(16.3) 40.4(15.9) 41.9(16.5) 20(44.1) 409 120 21” Sony (GDM-500PS) 50.5(19.9) 49.8(19.6) 47.5(18.7) 31(68.3) 546 160 21” Sony (GDM-5402) 49.1(19.4) 49.8(19.6) 47.8(18.9) 32(71) 498 145 21” Sony (CPD-G520P) 49.8(19.6) 49.8(19.6) 48.8(19.2) 30.4(67.4) 464 135 27” Panasonic (DT-2750MS) 57.5(22.6) 67.8(26.8) 53(20.9) 58(126) 884 260 27” Monivision (DM5948S) 59.7(23.5) 71.1(28) 50.8(20) 54.4(120) 782 230 2” DDW 10.2(4) 33(13) 21.6(8.5) 5.4(12) 170 50 PRN50/RMM 20.4(8) 11.6(4.6) 9.3(3.7) 1.2-2.6(2.7-5.7) 170 50 4” DDW 17.8(7) 26(10.3) 41.1(16.2) 7.7(17) 308 90 SmartPac :w/o Batteries 25.4(10) 31.8(12.5) 9.5(3.3) 5.7(12.7) 35 10 :w/2 Batteries 25.4(10) 31.8(12.5) 13.6(4.9) 7.5(16.5) 35 10 :w/1 Batt & AC 25.4(10) 31.8(12.5) 18.4(6.8) 7.2(16.2) 45 13.4 Modular Central Statn Base 14.9(5.8) 39.4(15.5) 43.3(17.1) 15.5(34) 1025 300 CentralScope 12 44.8(17.7) 39.4(15.5) 43.3(17.1) 31.8(70) 1200 350 CIC Controller : NightShade 49.1(19.3) 21.1(8.3) 45(17.7) 22.9(51)(max) 1000 298(max) : BCM 42.5(16.75) 20(7.9) 47(18.5) 13.1(29)(max) 1025 300(max) CDT LAN Receiver Cabinet 57.2(22.5) 39.4(15.5) 71.8(28.3) 54.5(12) 444 w/8ch 130 w/8ch 546 w/16ch 160 w/16ch ApexPro (w/4 Quad Rcvr Mod) 17(6.7) 32.5(12.8) 25(9.8) 6.4(14) 85 25 M200 RAMS Tower 52.1(20.5) 26.6(10.5) 26.6(10.5) 30.8(68) 563 165 M250 Display 32.6(12.8) 32(12.5) 14.1(5.6) 7.3(16) 240 71 OctaComm/Octanet 21.1(8.3) 21.3(8.4) 6.6(2.6) 1.1(2.4) 15 5
7-Jan-03
DASHon Aestiva
RAC2A
or
Egl 4000on Aestiva
Slr8000(M) w/CRTon Aestiva
Slr8000(M) w/Flt Pnlon Aestiva
Slr9500 on Aestiva
Anesthesia QV Home Page 1Datex-Ohmeda
Due to product innovations, mounts contained herein are subject to change without notice.(Form may vary, but fit and function will generally be the same.)
7900
7900
Nextg
Eagle 4000Dovetail Mtg
Options
Dash Dovetail Mtg
Options
Slr8000(M) Mid-Shlf Mt forDspl & Side Mt Options forDovetail Mtg Applications
Aestiva
Specs
900069-033Slr8000(M) Top MtKit for Mod II Series
Aestiva
RAMS Mt for Modulusor Excell/SE Series
Machines
Slr9500 w/Single or DualFlat Panel Displays on
Mod SE
Flt Pnl Mt for Dovetail12x12 Artcld Arm
MODIIx, SE, MOD SE, et All
MODIIx, SE, MOD SE, et All
Flat Panel
Display
Mounting Parts fornon-Aerstiva Machines
Anesthesia QV Home Page 2Datex-Ohmeda& Draeger/NAD
Due to product innovations, mounts contained herein are subject to change without notice.(Form may vary, but fit and function will generally be the same.)
NextgBack
Datex-OhmedaNAD
or
2003533-001Slr9500 w/Flt Pnl
Starter Kit for NAD 6000
2003531-001Slr8000(M) w/CRT
Starter Kit for NAD 6000
Slr8000(M) w/Flt Pnl Mtg Sys for Various
NAD Anesth Machines
Eagle 4000 on VariousNAD Anesth Machines
Dash X000 on VariousNAD Anesth Machines
DASH (w or w/o SAM) MtgOptions for Various OlderFlat Top NAD Anest Mach
or
Slr9500 w/Single or DualFlat Panel Displays
for GS (not Fabius GS)
DASH
x000
DASH
x000
DASH
x000
Eagle 4000 Mtg Optionsfor Various Older FlatTop NAD Anest Mach
900069-055Slr8000/8000M
Pedestal Mt
NAD
or
2014446-001Slr8000/9500 w/Flt Pnl
Starter Kit for Fabius GS
Anesthesia QV Home Page 3Draeger/NAD
Due to product innovations, mounts contained herein are subject to change without notice.(Form may vary, but fit and function will generally be the same.)
gBack
Top Mt Components& Single or Dual
RAC Side Mt
Slr8000(M) w/StackedBase & Dspl (CRT or FP)
for N2A
-or-
-or-
Slr8000(M) w/StackedBase & Dspl (CRT or FP)
for N2B/C/4/GS
Slr8000(M) w/StackedBase & Dspl (CRT or FP)
w/Side Mtd RAC(s)for N2B/C/4/GS
Side Mtd Flt Pnl Dspl & RACfor N2B/C/4/GS
Flat PanelDisplay
Pole Mtd Flt Pnl Dspl Major Mounting Parts forN2x/3/4/GS
-or-
Flat Panel
Display
Eagle 4000 Top or Sided Mount on Datex/Ohmeda Aestiva(for Either Display or Folding Arm Anest Mach)
Top Mounted SystemSAME For BOTH Models
(Shown On Display Arm Model)
2002718-001Top Chnl w/Rls
Display Arm ModelSide Mount System
(With Options)
Aestivaw/Display Arm
Folding Arm ModelSide Mount System
(If Data Display Used,Relocate mount to Rear Track)
Aestivaw/Folding Arm
900304-008Bot Mtd Pan w/Adptr
2003479-001Surface Mt w/10° Tlt
2002722-00117.8cm (7in)Side Channel
or
410559-001Handle/Slide Mt
(Ordered Separately)
Eagle
4000407349-009
38cm (15in) Pvt BlkM Series Arm
w/Tlt-Swvl
or
410559-001Handle/Slide Mt
(Ordered Separately)
Eagle
40002002723-001
30.5cm (12in) FixedArm w/Adptr Plt
Display Arm Model Notes:1. All mounting parts sold individually,not in kit form.2. Top Mounted System:2002718-001 Top Channel w/Rails,2003479-001 Horiz Chnl Mount and 900304-008 Bottom Mounted Pan.3. Side Mounted System:2002723-001 30.5 cm (12 in) Fixed Arm withAdapter Plate.As an Option, 410559-001 Handle/Slide Mt,purchased separately, may be used in placeof the adapter plate.
Folding Arm Model Notes:1. All mounting parts sold individually,not in kit form.2. Top Mounted System:2002718-001 Top Channel w/Rails,2003479-001 Horiz Chnl Mount and900304-008 Bottom Mounted Pan.3. Side Mounted System:2002722-001 17.8 cm (7 in) Chnl,407349-009 38 cm (15 in) M Series PivotBlk Arm and 408048-001 Adapter Plate Mt.As an Option, 410559-001 Handle/Slide Mt,purchased separately, may be used in placeof the 408048-001 adapter plate mt.4. NOTE: If Data Display is used, the mountmay need to be relocated to rear track.
Eagle
4000
408048-001Adapter Plate Mt
(Ordered Separately)
DASH Top or Sided Mount on Datex/Ohmeda Aestiva(for Either Display or Folding Arm Anest Mach)
Folding Arm Model Notes:1. All mounting parts sold individually, not inkit form.2. Top Mounted System:2002718-001 Top Channel w/Rails and2002719-001 Horiz Chnl Mt w/Adptr Plt.If SAM is required, add Optional 2002720-001RAC2A Mount w/Adapter Plate.3. Side Mounted System:2002722-001 17.8 cm (7 in) Side Channeland 407349-009 38 cm (15 in) 'M' Series Pvt Block Arm.If SAM is required, add Optional 404757-001Clamp-On RAC2A Mount.4. NOTE: If Data Display is used, the mountmay need to be relocated to rear track.
Display Arm Model Notes:1. All mounting parts sold individually, not inkit form.2. Top Mounted System:2002718-001 Top Channel w/Rails and2002719-001 Horiz Chnl Mt w/Adptr Plt.If SAM is required, add Optional 2002720-001RAC2A Mount w/Adapter Plate.3. Side Mounted System:2002717-001 30.5 cm (12 in) Fixed Arm w/Dovetail mounting.If SAM is required, add Optional 404757-001 Clamp-On RAC2A Mount.
Top Mounted SystemSAME For BOTH Models
(Shown On Display Arm Model)
2002718-001Top Chnl w/Rls
2002719-001Egl Horiz Ch Mt
w/Adptr Plt
OPTIONAL2002720-001RAC2A Horiz Ch
Mt w/Adptr Plt
DASH
x000RAC2A
OPTIONAL 404757-001*
RAC 2AClamp-on Mount
2002717-00130.5cm (12in) Fixed
Arm w/Tlt-Swvl
Display Arm ModelSide Mount System
Aestivaw/Display Arm
DASH
x000
RAC2A
2002722-00117.8cm (7in)Side Channel
Folding Arm ModelSide Mount System
(If Data Display Used,Relocate mount to Rear Track)
OPTIONAL 404757-001*
RAC 2AClamp-on Mount
407349-00938cm (15in) Pvt Blk
'M' Series Armw/Tlt-Swvl
Aestivaw/Folding Arm
RAC2A
DASH
x000
422830-00425.4cm (10in)
RAC Mount Arm
Mounting Systemw/CRT & Slr8000 on Top
and RAC on Side
RAC Mount(Ordered separately,
see notes)
Adapter PlateSpecific to each CRT, and
must be ordered Separately(See Notes)
Optional PRN50 Mt(Ordered separately,
see notes)
2002718-001Top Chnl w/Rails
2003479-001Surface Mt w/10° Tlt
2003478-001Surface Mt forSlr8000/8000M
Base
Solar 8000/8000M w/CRT on Aestiva,Display or Folding Arm Machine See Notes Below
Display Arm Style Machine Notes:1. All mounting parts sold individually, NOT in kit form.2. Mounting System w/CRT and Solar 8000/8000M ontop & RAC on Display Arm: 2002718-001 Top Channelw/Rails, 2003478-001Horiz Chnl Mt for Slr8000/M,2003479-001 Horiz Chnl Mt for CRT, CRT Adptr Plate (see note 4), 422830-004 Blank Arm for RAC Mt andClamp-On RAC Mt (see note 3).3. To mount RAC(s) use p/n 404757-005 for SingleRAC and/or add p/n 405154-009 for Dual RAC option.4. See rear of manual for available adapter plates.Only plates for displays sold by GEMMS are listed.Any other, contact GCX.5. If optional PRN50 printer is used, order 421358-002mount.
Top Mount for Slr8000and CRT & RAC on Side
(PRN50 Mt Optional)If Data Display is Used,
Relocate RAC Mt to Rear Track
RAC Mount(Ordered separately,
see notes)
Adapter PlateSpecific to each CRT, and
must be ordered Separately(See Notes)
2003478-001Surface Mt forSlr8000/8000M
Base
PRN50 Mount(Ordered separately,
see notes)
2002733-00130cmx30cm (12inx12in)
Articulating Armfor RAC Mtg
2002718-001Top Chnl w/Rails
2003479-001Surface Mt w/10° Tlt
Folding Arm Style Machine Notes:1. All mounting parts sold individually, NOT in kit form.2. Mounting System w/CRT & Solar 8000/8000M ontop:2002718-001 Top Channel w/Rails, 2003478-001Horiz Chnl Mt for Slr8000/M, 2003479-001 HorizChnl Mt for CRT,CRT Adptr Plate (see note 4),2002733-001 Artcld Arm for RAC Mt and Clamp-OnRAC Mt (see note 3).3. To mount RAC(s) use p/n 404757-005 for SingleRAC and/or add p/n 405154-009 for Dual RAC option.4. See rear of manual for available adapter plates.Only plates for displays sold by GEMMS are listed.Any other, contact GCX.5. If optional PRN50 printer is used, order 421358-002mount.6. If Data Display is used, relocate RAC mount to reartrack.
Display ArmMachine
Folding ArmMachine
Universal
VESA Bracket
Flat Pnl & RACon Data Arm
w/Slr8000(M) on Top(PRN50 Mt optional)
RAC Mount(Ordered separately,
see notes)OptionalPRN50 Mt
(Ordered separately,see notes)
422830-00425.4cm (10in)
RAC Mount Arm
2002718-001Top Chnl w/Rails
2003478-001Surface Mt forSlr8000/8000M
Base
Display Arm Machine Notes:1. All mounting parts sold individually, Not in kit form.2. Mounting System w/Slr8000(M) on top and Flat Panel& RAC on Display Arm:2002718-001 Top Channel w/Rails, 2003478-001 HorizChnl Mt for Slr8000(M), 2002728-002 Universal Flt Pnl Mt, 422830-004 Blank Arm for RAC Mt and Clamp-On RAC Mt(see note 3).3. To mount RAC(s) use p/n 404757-005 for Single RACand/or add p/n 405154-009 for Dual RAC option.4. If optional PRN50 printer is used, order 421358-002 mt.5. Two (2) options for mounting KeyPad Holder:directly to Universal Flat Panel Mt w/included screws- or - directly to the specific flat panel using keypad holderbracket 2004004-001 for Planar or 2003416-001 for Totoku.Holster, KYPD-BXX-_XX ordered separately.6. These mounts work on Aestiva model 3000 & model 5.Also w/7900 or 7100 vent displays. Use with larger 7100display requires included subplate.
7100 Vent
SubPlate
2002728-002Universal Mt for Data Arm,
for mtg Flt Pnl, PS & Vent Display.(See below left for additional
information on 7100 Vent)
KeyPad MtgOptions.
See notes.
Location of IncludedSubPlate required for
mounting Optional7100 Vent Display
7900
RAC Mount(Ordered separately,
see notes)
PRN50 Mount(Ordered
separately,see notes)
2002722-00117.8cm (7in)Side Channel
Side Mt for Flat Panel w/Slr8000 on Top& RAC on Side
(PRN50 Mt Optional)If Data Display is used,
Relocate Flt Pnl to Rear Track.
407349-00938cm (15in)
M Series Pvt Armw/Tlt & Swvl
2002718-001Top Chnl w/Rails
2003693-001Flt Pnl PowerSupply Holster
2003478-001Surface Mt forSlr8000/8000M
Base
Folding Arm Machine Notes:1. All mtg parts sold individually, NOT in kit form.2. Mounting System w/Slr8000/8000M on top & FlatPanel on Left side: 2002718-001 Top Channel w/Rails,2003478-001 Horiz Chnl Mt for Slr8000/M, 2002722-00117.8 cm (7 in) Chnl, 407349-009 38 cm (15 in) m SeriesPvt Blk Arm for Flt Pnl, 2001631-001 Flt Pnl Adptr Plt,2003693 -001 Flt Pnl Pwr Sup Holster and Clamp-OnRAC Mt (see note 3).3. To mount RAC(s) use p/n 2004464-001 for Single RACand/or add p/n 405154-009 for Dual RAC option.4. If optional PRN50 printer is used, order 421358-002 mt.5. If Data Display is used, relocate RAC mount to rear track.
Solar 8000/8000M w/Flat Panel Display on Aestiva,Display or Folding Arm Machine See Notes Below
Display ArmMachineFolding Arm
Machine
2003693-001Flt Pnl PowerSupply Hlstr
Add'l Mounting Partsfor Adding 2nd Display
407349-00938cm (15in) M SeriesPvt Arm w/Tlt & Swvl
2002722-00117.8cm (7in)
Side Chnl
Solar 9500 w/Single or Dual Flat Panel Displays on Aestiva w/Folding or Display Arm See Notes Below
Folding Arm Model Notes:1. All mtg parts sold individually, NOT in kitform.2. Mounting System for Slr9500 w/Single FlatPanel & RAC(s) on Left side:2002729-001 Slr9500 Side Mount, 2002722-00117.8 cm (7 in) Chnl, 407349-009 38 cm (15 in)M Series Pvt Blk Arm for Flt Pnl, 2003693-001 Flt PnlPwr Sup Holster and RAC Mt (see note 3).3. To mount RAC(s) use p/n 2004464-001 for SingleRAC and/or add p/n 405154-009 for Dual RAC option.4. Adding a second flat panel display:In addition to the parts in Note 2, or ADD the following:2002722-001 17.8 cm (7 in) Chnl, 407349-009 38 cm(15 in) M Series Pvt Blk Arm for Flt Pnl, 2003693-001Flt Pnl Pwr Sup Holster.5. If Datex/Ohmeda Data Display is used, themount may need to be relocated to rear track.6. NOTE: Longer cables may be required forconnection to 9500.
2003693-001Flt Pnl PowerSupply Hlstr
Add'l Mounting Partsfor Adding 2nd Display
RAC Mount(Ordered separately,
see notes)
2002722-00117.8cm (7in)Side Channel
Aestivaw/Folding Arm
2002729-001Right Side Chnl Mt
for Slr9500
407349-00938cm (15in) Pvt Arm
w/Tlt & Swvl
2003693-001Flt Pnl Power
Supply Holster
Aestivaw/Display Arm
RAC Mount(Ordered separately,
see notes below)
2002728-002Flat Panel Mt for Data Arm,
consists of Mt for Flt Pnl,PS and Data Display
422830-00425.4cm (10in)
RAC Mount Arm
2002729-001Right Side Chnl Mt
for Slr9500
Display Arm Model Notes:1. All mounting parts sold individually, NOT in kitform.2. Mounting System for Slr9500 w/Single Flat Panel& RAC(s) on Display Arm:2002729-001 Slr9500 Side Mount, 2002728-002Data Arm Flt Pnl Mt, 422830-004 Blank Arm for RACMt and Clamp-On RAC Mt (see note 3).3. To mount RAC(s) use p/n 2004464-001 for SingleRAC and/or add p/n 405154-009 for Dual RAC option.4. Adding a second flat panel display:In addition to the parts in Note 2, or ADD the following:2002722-001 17.8 cm (7 in) Chnl, 407349-009 38 cm(15 in) M Series Pvt Blk Arm for Flt Pnl, 2003693-001Flt Pnl Pwr Sup Holster.5. NOTE: Longer cables may be required forconnection to 9500.
Universal
VESA Bracket
7100 Vent
SubPlate Included SubPlaterequired for mtg
Optnl 7100 Vent Dspl
7900
407349-00938cm (15in) M SeriesPvt Arm w/Tlt & Swvl
2002722-00117.8cm (7in)
Side Chnl
410559-001Handle/Slide Mt(Ordered Separately)
408048-001Adapter Plate Mt(Ordered Separately)
Pivot Arm Mount Notes:1. All parts sold individually, NOT in kit form. Parts needed include pn 407349-009 M Series Pivot arm, 407349-02617.8 cm (7 in) Dovetail Wall channel and all mtg hardware. Order either408048-001 Slide Plate or 410559-001 Handle/Slide to mount Eagle4000. Note: Mounting kit can be used on any Datex-Ohmeda Anesthesiamachine w/dovetail mount capability. Also see Important note below.2. Optional PRN50 Dovetail mt, consisting of p/n's 421358-009 and407349-026, is ordered separately when required.
Articulated Arm Mount Notes:1. All parts sold individually, NOT in kit form. Parts needed include pn 407349-022 M Series Articulated arm,407349-026 17.8 cm (7 in) Dovetail Wall channel and all mtg hardware.Order either 408048-001 Slide Plate or 410559-001 Handle/Slide tomount Eagle4000. Note: Mounting kit can be used on any Datex-Ohmeda Anesthesiamachine w/Dovetail mount capability. Also see Important note below.2. Optional PRN50 Dovetail mt, consisting of p/n's 421358-009 and407349-026, is ordered separately when required.
Important Note: Some early MOD II machines did not have dovetailchannels. Customer should contact Datex-Ohmeda for an upgrade to adddovetail channels. This upgrade is ONLY available from Datex-Ohmeda.
Eagle 4000 Datex-Ohmeda Dovetail Mount Options Pivot Arm Mount See Notes BelowArticulating Arm Mount See Notes Below (Shown on Datex-Ohmeda Excel 210SE)
30.5 cm (12 in)M Series Pivot
Arm Mount
30.5 x 30.5 cm(12 x 12 in)
M Series ArticulatedArm Mount
409347-02617.8cm (7in)Side Channel
407349-00938cm (15in) Pvt Blk
'M' Series Armw/Tlt-Swvl
407349-02617.8cm (7in)Side Channel
407349-02230.5 x 30.5cm
(12 x 12in) Artcld'M' Series Arm
w/Tlt-Swvl
407349-009
90
~35.6 cm(14 in)
90
90
SWIVEL
SWIVEL
407349-02290
90
SWIVEL
~61 cm(~24 in)
SWIVEL
90
SWIVEL
or
Eagle
4000
orEagle
4000
Optional PRN50DoveTail Mount(See Note 2 Below)
410559-001Handle/Slide Mt(Ordered Separately)
408048-001Adapter Plate Mt(Ordered Separately)
Optional PRN50DoveTail Mount(See Note 2 Below)
OPTIONAL 404757-001*
RAC 2AClamp-on Mount
Pivot Arm Mount Notes:1. All parts sold individually, NOT in kit form. Parts needed include pn 407349-009 M Series Pivot arm, 407349-02617.8 cm (7 in) Dovetail Wall channel and all mtg hardware. Mounting kit can be used on any Datex-Ohmeda Anesthesia machine w/dovetail mount capability.2. Optional RAC2A Clamp-On mt, p/n 404757-001, is ordered separately when required.
Articulated Arm Mount Notes:1. All parts sold individually, NOT in kit form. Parts needed include pn 407349-022 M Series Articulated arm,407349-026 17.8 cm (7 in) Dovetail Wall channel and all mtg hardware. Mounting kit can be used on any Datex-Ohmeda Anesthesia machine w/Dovetail mount capability.2. Optional RAC2A Clamp-On mt, p/n 404757-001, is ordered separately when required.
Important Note: Some early MOD II machines did not have dovetailchannels. Customer should contact Datex-Ohmeda for an upgrade to adddovetail channels. This upgrade is ONLY available from Datex-Ohmeda.
OPTIONAL 404757-001*
RAC 2AClamp-on Mount
Dash X000 Datex-Ohmeda Dovetail Mount Options Pivot Arm Mount See Notes BelowArticulating Arm Mount See Notes Below (Shown on Datex-Ohmeda Excel 210SE)
30.5 cm (12 in)M Series Pivot
Arm Mount 30.5 x 30.5 cm(12 x 12 in)
M Series ArticulatedArm Mount
409347-02617.8cm (7in)Side Channel
407349-00938cm (15in) Pvt Blk
'M' Series Armw/Tlt-Swvl
407349-02617.8cm (7in)Side Channel
DASH
x000
407349-02230.5 x 30.5cm
(12 x 12in) Artcld'M' Series Arm
w/Tlt-Swvl
DASH
x000
407349-009
90
~35.6 cm(14 in)
90
90
SWIVEL
SWIVEL
407349-02290
90
SWIVEL
~61 cm(~24 in)
SWIVEL
90
SWIVEL
OPTIONALPRN50 Dovetail Mt
(See Note 3)
Mid-Shelf 15" Medical-Grade Monitor w/Dovetail Mounted Slr8000(M) Base and Rac Mount Parts See Notes Below(Shown on Datex-Ohmeda Mod SE)
Mounting Notes:1. All parts sold individually, NOT in kit form.Parts needed include; 422838-001 Solar base Flush Mt,407349-026 Dovetail Mounted Wall Channel, 418328-003Midshelf CRT display Mt, either 418328-004 Single or900654-004 Dual RAC mount.2. Mounting kit can only be used on the 210SE, Modulus SE,Modulus II, II+ or II CD machines with 15" medical-grade monitor. (Note: Modulus II/II CD machines may require Datex-Ohmedamodification. See note 4 below.)3. Optional PRN50 mount, consisting of p/n's 421358-009 and407349-026, may be installed on the right side of the machine.4. Important - Some early MOD II machines did not have dovetailchannels. Customer should contact Datex-Ohmeda for an upgradeto add dovetail channels. This upgrade is ONLY available fromDatex-Ohmeda.
418328-004Single RAC
or
900654-004Dual RAC
Mount
418328-003Midshelf CRT
Mount 422838-001Solar Base
Flush Mount
407349-02617.8cm (7in)Dovetail Mtd
Wall Chnl
RACMount
Additional Mount(Could also be used toMount other devices.
See note 2)
Solar Mount(Could also be used toMount other devices.
See note 2)
Top Mounted Slr8000/8000M Mount Kit for Datex-Ohmeda Modulus II 900069-033
900069-033 Notes:1. Kit, pn 900069-033, includes channel, mounting plates forRAC, Solar Base & additional device, adapter plates (wherenecessary) and all hardware. PRN50 mounting NOT included.2. Mounting kit can only be used on the Modulus II, II+ or II CDmachines for Slr8000(M) mounting.Kit parts can be used to mount RAC, Stacked base and flatpanel display or RAC, SBS w/base and SBS CRT. CRTrequires appropriate adapter plate NOT included w/kit or CRT.3. Consideration needs to be given to overall heightof anesthesia cart and added equipment. Someconfigurations may be taller that standard doorwayheight making cart entry/removal impossible.
OPTIONALPRN50 Dovetail Mt
(Consists of 421358-009& 407349-026)
Flat Panel Display Mounting 12" x 12" Articulated Arm Kit 420855-005 8" x 8", P/N 420855-006, No Longer Available - Use 420855-005 (Shown on Mod SE)
Notes1. Kit, pn 420855-005, includes 30.5 cm x 30.5 cm (12 in x 12 in) M Series Articulated arm, Power SupplyHolster and 17.8 cm (7 in) Wall Channel w/Dovetail mtg.Flat Panel Adapter Plate is usually included w/display.2. RAC Mount ordered separately. Order pn 418328-004for single RAC or 900654-004 for dual RACs.3. Flat panel mounting kits can be used on 210SE,Modulus SE, Modulus II, II+ or CD Anesthesia machines.4. Important - Some early MOD II machines did not havedovetail channels. Customer should contact Datex-Ohmeda for an upgrade to add dovetail channels. Thisupgrade is ONLY available from Datex-Ohmeda.
Slr8000/8000M�Base Mounting.
Sit on top orin Mid-Shelf,
or mount verticallyon side.
RAC Mount(Ordered separately,
see notes below)
420855-005 (12"x12")Articulating Arm Kit(consists of Artcld Arm,
7" Chan & Pwr Sply Hlstr)
90
90
SWIVEL
~61 cm(~24 in)
SWIVEL
90
SWIVEL
Flat Panel
Display
RAC MountSee note below
420855-005 (12"x12")Articulating Arm Kit
(consists of Artcld Arm,7" Chan & Pwr Sply Hlstr)
407349-02617.8 cm (7 in)
Dovetail Mtd ChnlMounts low on Rt Leg.
420855-005 (12"x12")Articulating Arm Kit
(consists of Artcld Arm,7" Chan & Pwr Sply Hlstr)
2002608-001Pedestal Mount for9500, PS & Flt Pnl
Lift Kit for ModSE Top Shelf.Must be used for installing Pedestal
mt into midshelf area. Lift Kit parts areONLY available from Datex-Ohmeda or GCX
9500 w/SingleFlat Panel Display
9500 w/DualFlat Panel Displays
RAC MountSee note below
Solar 9500 w/Single or Dual Flat Panel Displays for use on Mod SE Anesthesia Machine See Notes Below
Notes1. For use with Single Flat Panel Display, order the following: 1) 420855-005 Kit, 30.5 cm x 30.5 cm (12 in x 12 in) Articulated Arm, Power Supply Holster & 17.8 cm (7 in) Channel, 2) 418328-004 Single RAC Mt and 3) 407349-026, 17.8 cm (7 in) Channel for mounting the Solar 9500.2. For use with Dual Flat Panel Displays, order the following: 1) 420855-005 Kit, 30.5 cm x 30.5 cm (12 in x 12 in) Articulated Arm, Power Supply Holster & 17.8 cm (7 in) Channel, 2) 418328-004 Single RAC Mt and 3) 2002608 Pedestal Mount for mounting the Solar 9500 and second Flat Panel Display.3. For Dual RACs, use 900654-004 intead of 418328-004.4. *NOTE* To install the Flt Pnl Pedestal mount into the midshelf area, a Top Shelf Lift Kit must be ordered. This kit is only available from Datex-Ohmeda or GCX.
RAMS Mounts for Datex-OhmedaOver-The-Leg Mt for Mod II, II Plus, II CD and Mod SE 417164-001Dovetail Mt for Excel 210SE 417164-002
417164-001 Notes1. Bracket, pn 417164-001 includes over-the-legmounting bracket. No mounting hardware necessary.2. Mount can be used on Modulus II, II Plus, II CD,and Modulus SE machines. See pn 417164-002 forExcel 210SE mountNot for use on Excel 110 machines.3. Maximum allowable weight: 45.36 kilograms (100 pounds).
417164-002 Notes1. Kit, pn 417164-002, includes Rams mount and dovetail attaching hardware.2. Kit is used only for Excel 210SE machines.See pn 417164-001 for Mod II/Mod SE machines. Not for use on Excel 110 machines.3. Maximum allowable weight: 45.36 kilograms (100 pounds).
417164-001
417164-002
418328-004Single RAC
Dovetail Mount
900654-004Dual RAC
Dovetail Mount
418328-003MOD 210/MOD SE
Midshelf Mount(w/10 Down Tilt)
422838-001Solar Base Flush Mt
(Req's 407349-026 forDovetail Mount)
421358-009PRN50 Mount
(Requires 407349-026for Dovetail Mounting)
418328-00740.6 cm (16 in) Mtg Chan
for Ohmeda Generic Mon Mt Kit
418328-00878.7 cm (31 in) Mtg Chan
for Ohmeda MODII Top Shelf
407349-02617.8 cm (7 in) Chnl
w/Ohmeda Dovetail Mtgfor Various Applications
407349-0277" Pole Mtd Chan
(includes 17.8 cm(7 in) Chan andPole Mt Clmp)
2003483-001Wall Channel Mounted
Pwr Sup Holderfor Flat Panel Dspl PS
421358-012PRN50 Horiz
Channel Mount
Major Parts for Mounting on Datex-Ohmeda non-Aestiva Series
407349-022 (12x12)M Series Articulated Armw/Manual Tilt & Swivelfor Flat Panel Dspl Mtg
2001349-00130.5 cm (12 in)
Slide Plate Pivot Arm(Must order 408048-001Adapter Plt separately)
EAGLE
4000
Eagle 4000 Mounts for Various NAD Anesthesia MachinesSide Mount for Julian 2001346-001Side Mt Starter Kit for 6000 2003526-001 (see notes below)
2001346-001 Notes:1. Mount, pn 2001346-001 includes: 30.5 cm (12 in) Pivot Arm w/6" Vertical Mounting Plateon Riser and Eagle 4000 Adapter Plate.2. Handle-Slide mount, p/n 410559-001, is optional andcan be used in place of included adapter plate.3. PRN50 mount is optional and ordered separately.
2003526-001 Notes:1. Starter Kit, p/n 2003526-001 includes: 54.7 cm (21.25 in) Left Side Channel and 30.5 cm (12 in)Pivot Arm w/Vertical mounting plate and Eagle 4000Adapter Plate.2. Handle-Slide mount, p/n 410559-001, is optional andcan be used in place of included adapter plate.3. PRN50 mount is optional and ordered separately.
2003526-001Starter Kit
Kit includes:30.5 cm (12 in) Pivot Arm
w/Adapter Plate &54.7 cm (21.25 in)Left Side Chennel
Available Options
8" Fixed Armfor PRN50
(421358-009)
Handle/Slide Mount(410559-001)
Clamp-On Mtfor PRN50
(421358-005)
6000
Julian
EAGLE
4000
Fabius GS Mounting Notes:1. Starter Kit, p/n 2014444-001, includes 40.6 cm(16 in) 'M' Series arm for Dash, Fabius GS ExtensionPlate and all attaching hardware.Option Notes:If SAM is required, add Optional 2004465-001 RAC2A Mt.
Mobile (M) Mounting Notes:1. Complete Mounting Kit, pn 2002386-001, includes: top shelf mounting plate, RAC2A side mount w/RACadapter plate and all mounting hardware.(Also includes Eagle 3000 adapter plate.)2. Individual mounting parts:- Top Plate only, pn 2002387-001, includes: topshelf mtg plate and mtg hardware.*IMPORTANT NOTE* - For use w/Eagle 3000, adapterplt pn 413030-013, IS NOT included with 2002387-001mt and MUST be ordered separately if required.- RAC2A Side Mount, pn 2002386-002, includes: side mount w/RAC adapter plate and mounting hardware.
DASH Mounts for Various NAD Anesthesia MachinesJulian, Side Mount, Dash only See Notes BelowNAD 6000, Side Mt Starter Kit, Dash Only 2003524-001Fabius GS Side Mount Kit 2014444-001Mobile (M), Top Mt Kit w/SAM Side Mt 2002386-001(See Configuration Notes Below)
Julian Mounting Notes:1. All parts ordered SEPARATELY, not in kit form.Order 407349-009, 30.5 cm (12 in) Pivot Arm w/5" MountingPlate and 2015604-001, 10.2 cm (4 in) Side Wall Channelw/Julian fittings.2. Mount can be used for either Dash X000 or Eagle 3000.(Eagle 3000 requires optional adapter plate 413030-013.)3. If SAM is required, add Optional 2004465-001 RAC2A mt.
6000 Mounting Notes:1. Starter Kit, p/n 2003524-001 includes: 54.7 cm (21.25 in) Left Side Channel and 30.5 cm (12 in)Pivot Arm w/Horizontal mounting plate and Eagle 3000Adapter Plate.2. Kit can be used for either Dash X000 or Eagle 3000.(If Dash is used, discard Eagle 3000 adapter plate.)3. If SAM is required, add Optional 2004465-001 RAC2A mt.
RAC2A Side MtIncluded
w/2002386-001
2002386-001Mtg Kit for Dashw/SAM Module
(Includes Top Mtg Plt,RAC2A Mt w/Adptr Plt
& E3000 Adptr Plt)RAC2A
Dash
X000
Mobile (M)
6000
OPTIONAL 204465-001*RAC 2A Mt
2003524-001Kit includes:
30.5 cm (12 in) Pivot Arm &54.7 cm (21.25 in) Left Side Chnl.
Alao includes Egl 3000 Adapter Plate.(Kit can be used to mounteither Dash or Eagle 3000)
407349-00930.5 cm (12 in)
Pivot Arm
DASH
x000
Julian
2015604-0014in Channel
w/Julian Fittings
Fabius GS
OPTIONAL2004465-001
RAC2A Mt
2014444-001'M' Series Pivot Arm
w/Fabius GSExtension PltDASH
x000
Arm &Extension Plt
RAC2A
RAC2AOPTIONAL 2004465-001*
RAC 2A Mt
RAC2A
DASH
x000
Julian CounterweightBase. MUST Be Used
For All Julian Mountings.Available ONLY From Dräger.
2001356-001OctaNet Bracket
(hangs outside door)
2001358-001Tramnet Hub
Attachment Kit(mts inside door)
2001349-00130.5 cm (12 in)
Slide Plt Pivot Armw/Shim
Clamp-OnRAC Mount
(404757-001 RAC2x-or-
404757-005 RAC4x)
2001348-001Top Shelf
Rails w/Feet
2001347-001Top Shelf
Base Plate
2001357-001Power SupplyHolster w/Mts
(mts inside door)
or
Solar 8000(M) w/Flat Panel Display on Varius NAD Anesthesia Machines Mounting System for Julian See Notes Below6000 Starter Kit (see notes below) 2003530-001
Julian Mounting Options Notes:1. All mounting pieces sold individually, not in kit form.2. Mounting system requirements for Solar 8000(M) w/FlatPanel Display:Top Shelf Base Plate pn 2001347-001, Top shelf Railsw/Feet pn 2001348-001, 30.5 cm (12 in) Pivot Arm w/6"Vertical Mounting Plate on Riser pn 2001349-001, PowerSupply Holster w/Mounts pn 2001357-001and RACMount (see note 3).3. Order 404757-001 for RAC2 or 404757-005 for RAC4(A).4. Optional: Hub Mount - 2001358-001 and OctaNet Mount- 2001356-001. Order as required.5. IMPORTANT - All mounting configurations require JulianCounterweighted base be installed on all machines.
6000 Mounting Options Notes:1. Starter Kit, p/n 2003530-001 includes: 54.7 cm (21.25 in) Left Side Channel, Top Plate w/53.3 cm(21 in) Horizontal Channel, Solar 8000/M Horizontal ChannelMount, 38.1 cm (15 in) Pivot Arm w/Vertical Mounting Plateon Riser, 30.5 cm (12 in) Rear Channel and Flat Panel PowerSupply Mount.This kit will mount either Solar 8000(M) w/flat panel display.2. IMPORTANT: Depending upon system configuration,additional options, not included w/Starter kit, are required tocomplete system. These include RAC mt, and wherenecessary, PRN50 mt, OctaComm mt and Hub mt. Theseare ordered separately as required.
2003530-001Starter Kit
Kit includes:54.7 cm (21.25 in) Left Side Chnl,Top Plate w/53.3 cm (21 in) Chnl,
Slr8000 Horizontal Chnl Mt,30.5 cm (12 in) Rear Chnl,38.1 cm (15 in) Pivot Arm &Flt Pnl Power Supply Mount
Available Optionsfor NAD 6000
PRN50 Clamp/On RAC MT (421358-002)or
PRN50 Horiz Chnl Mt (421358-012)
Top Shelf Angle w/4" Chnl (2003481-001)(requires 2003477-001 top plate)
OctaComm Flush Wl Mt (2003484-001),HUB Flush Wl Mt (404838-004)
(Requires additional options,shown below, to complete system.)
6000
Julian
Single RAC4(404757-005)
Dual RAC4 Optn(405154-009)
Single RAC4(404757-005)
2003531-001Starter KitKit includes:
54.7 cm (21.25 in) Left Side Chnl,Top Plate w/53.3 cm (21 in) Chnl,
Slr8000 Horizontal Chnl Mt,CRT Horizontal Chnl Mt w/10 Deg tilt &
38.1 cm (15 in) Blank Pivot Arm
Available Options
PRN50 Clamp/On RAC MT (421358-002)or
PRN50 Horiz Chnl Mt (421358-012)
OctaComm Flush Wl Mt (2003484-001),HUB Flush Wl Mt (404838-004)
CRT Mounting Adapter. Specific to CRT Model.(See rear of section 1 for available choices)
(Requires additional options at right, to complete system.)
Solar 8000/M w/CRT on NAD 6000 Anesthesia Machine Starter Kit (see notes below) 2003531-001
Notes:1. Starter Kit, p/n 2003531-001 includes: 54.7 cm (21.25 in) Left Side Channel, Top Plate w/53.3 cm (21 in)Horizontal Channel, Solar 8000/M Horizontal Channel Mount, CRTHorizontal Channel mount w/10 degree tilt and 38.1 cm (15 in)Blank Pivot Arm. This kit will mount either Solar 8000 or 8000M, w/15 or 17" CRT.2. IMPORTANT: Depending upon system configuration, additionaloptions, not included w/Starter kit, are required to complete system.These include RAC mt, and where necessary, PRN50 mt, OctaCommmt and Hub mt. These are ordered separately as required.3. CRT mounting adapter plates are specific to dispay used. Onlydisplays sold by GEMMS are supported w/adapter plates from GEMS.All others may be available from GCX.
Dual RAC4 Optn(405154-009)
Solar 9500 w/Flat Panel on NAD 6000 Anesthesia Machine Starter Kit (see notes below) 2003533-001
Notes:1. Starter Kit, p/n 2003533-001 includes: 111.8 cm (44 in) Right Side Channel, 54.7 cm (21.25 in) Left SideChannel, 30.5 cm (12 in) Left Rear Channel, 38.1 cm (15 in) PivotArm w/Vertical Mounting Plate on Riser and Flat Panel PowerSupply Mount. This kit will mount Solar 9500 w/1 or 2 Flat Panel Displays.2. IMPORTANT: Depending upon system configuration, additionaloptions, not included w/Starter kit, are required to complete system.These include RAC mt, and where necessary, OctaComm mt andOkidata Printer mt. These are ordered separately as required.3. Starter kit only mounts one flat panel display. To add a secondflat panel display, see available options.4. Solar 9500 should be mounted on right side low, and may requirelonger interconnect cables to RAC and display(s).
Right SideLeft Side
Single RAC4 (404757-005)
Dual RAC4 Optn (405154-009)
2003533-001Starter Kit
Kit includes:111.8 cm (44 in) Right Side Chnl,54.7 cm (21.25 in) Left Side Chnl,
30.5 cm (12 in) Rear Chnl,38.1 cm (15 in) Pivot Arm &Flt Pnl Power Supply Mount
Available Options
OctaComm Flush Wl Mt (2003484-001)
To Add 2nd Flt Pnl:
Power Sup Mount (2003483-001),Flt Pnl Horiz Rail Mt (2001622-001)
& Top Plt w/Horiz Chnl (2003477-001)
(Requires additional options at right, to complete system.Starter kit is for 1 Flt Pnl Dspl. Avail options adds 2nd Flt Pnl)
Okidata Printer Mt (2003486-001)
Fabius GS
Single or Dual RACMounting Arm w/
Sing & Dual Adp Plts
'M' SeriesPivot Arm
w/Fabius GSExtension
4" OffSetChannel
8000/8000M/9500 Starter Kitfor Draeger Fabius GS 2014446-001
9500 Starter Kit Notes:1. Starter Kit, p/n 2014446-001, consists of40.6 cm (16 in) single flat panel display mountw/Extension, 30.5 cm (12 in) RAC mt for singleor dual RACs w/4" Offset, PRN50 mount andcounter weight kit.2. 9500 requires no additional mtg adapter andmay be located either low on right side, abovethe counter weight or mid back, behind the tanks.However, it is recommended that longerinterconnect, min 10', be used w/9500.3. For second flat panel display, order optionalmt, p/n 2002608-001 and set on top of machine.
8000(M)Flush Mt
OptionalKeypad Holster
& Holster Bracket
Counter WeightKit - Mounted Lowand on Right Sideof Machine, usingRight Rear Channel
PRN50Mount
Solar 8000/8000M
Solar 9500
2004004-001Planar Flt Pnl
Holster Bracket
2003416-001Totoku Flt Pnl
Holster Bracket
2002608-001Flat Pnl Mt for
Second 9500 Display
Available Options
8000(M) Base(Mounts either
on top or on rearbehind gas cyl's)
9500Controller(Mounts Lowon Right Sideabove counterweight)
2017534-00115"/18" Flt Pnl
Univ Keypad Mt
8000(M) Starter Kit Notes:1. Starter Kit, p/n 2014446-001, consists of40.6 cm (16 in) single flat panel display mountw/Extension, 30.5 cm (12 in) RAC mt for singleor dual RACs w/4" Offset, Solar 8000(M) FlushMt, PRN50 mount and counter weight kit.2. 8000(M) base can either be set on top ofanesthesia machine, requiring NO additionalmtg parts, OR, may be mounted low on rightside or on mid back using flush mount includedwith the Starter kit. When mounting the Solarbase other than on top, it is recommended thatlonger interconnect cables be ordered.Mounting the Solar base other than on top willalso require a remote keypad holster (orderedseparately) and mounting bracket to relocatekeypad. Use bracket p/n 2004004-001 for Planarflat panel, bracket p/n 2003416-001 for Totokuflat panel or bracket p/n 2017534-001 for Univ15"/18" flat panel.
407349-016Chnl W/Univ Bkng Plt
X3
2003438-001Pwr Sup Hlstr
404757-005Single RAC
407349-016Chnl W/Univ
Bkng PltX2
2003438-001Pwr Sup Hlstr
404757-005Single RAC
2002608-001Flt Pnl & 9500Pedestal Mt
9500 w/SingleFlat Panel Display
9500 w/DualFlat Panel Displays
Solar 9500 w/Single or Dual Flat Panel Displays Mounting System for NAD GS See Notes Below
Notes:1. Mtg system requirements for Solar 9500 w/Sgl Flt Pnl Dspl: 407349-016 17.8 cm (7 in) Channel w/Backing Plt x3 (1 forSlr9500 mt, 1 for Flt Pnl Arm mt and 1 for PS Holster), 407349-030 PS Holster, 2003482-001 Flt Pnl Pvt Arm w/Riser and RACMount (see note 3).2. Mtg system requirements for Slr 9500 w/Dual Flt Pnl Dspls: 2002608-001 Pedestal Mount for Solar 9500 , Single Flat PanelDisplay & Power Supply, 407349-016 17.8 (7 in) Channelw.Backing Plt x2 (1 for Flt Pnl Arm mt and 1 for PS Holster),407349-030 PS Holster, 2003482-001 Flt Pnl Pvt Arm w/Riserand RAC Mount (see note 3).3. Order 404757-005 for single RAC4A and/or add 405154-009for Dual RAC Option.
405154-009Dual RAC
Option
405154-009Dual RAC
Option
2003482-001Flt Pnl Pvt Arm
w/Riser
2003482-001Flt Pnl Pvt Arm
w/Riser
Articulating Arm Mt for N2C Notes:1. All parts are purchased separately, NOT in kit form.Parts required are:pn 407349-016 17.8 cm (7 in) Wall Chnl w/Backing Plt,pn 407349-022 30.5 cm x 30.5 cm (12 in x 12 in) PivotArticulating arm, and either pn 408048-001 E4000Adapter plt or 410559-001 Handle/Slide Mt.2. Two (2) options for mounting the PRN50 writer. See above for clamp-on mt, pn 421358-005, and right,for weighted pedestal base, pn 421837-001.3. Important - Some early Narkomed 4 machines,w/AVE style vent controller, may NOT have side 2-holepatten. The absence of these two holes make thismount incompatible with these machines.
Various Eagle 4000 Mount Options for Older NAD Flat Top MachinesStand-Up Mount See Notes BelowArticulating Arm Mt for NAD 2C See Notes BelowArticulating Arm Mt for NAD 2B/3/4 See Notes Below
Stand-Up Mount Notes:1. All parts are purchased separately, NOT in kit form.Parts required are:pn 2007059-001 Pedestal Mount and pn 900304-008 Bottom Mounted Pan.2. Mounting kit can be used on all N2X, 3, 4 and GSanesthesia machines w/flat top. Mount has tilt and swivel.3. The PRN50 can be positioned on top of the anesthesiamachine using the weighted pedestal base, pn 421837-001.
Articulating Arm Mt for N2B/3/4 Notes:1. All parts are purchased separately, NOT in kit form.Parts required are:pn 407349-032 33 cm (13 in) Wall Chnl w/Backing Plt,pn 407349-022 30.5 cm x 30.5 cm (12 in x 12 in) PivotArticulating arm, and either pn 408048-001 E4000Adapter plt or 410559-001 Handle/Slide Mt.2. Two (2) options for mounting the PRN50 writer.See above for clamp-on mt, pn 421358-005, and left,for weighted pedestal base, pn 421837-001.3. Important - Some early Narkomed 4 machines,w/AVE style vent controller, may NOT have side 2-holepatten. The absence of these two holes make thismount incompatible with these machines.
407349-0167in Channel
w/Backing Plt
Optl421358-005
PRN50Mt
410559-001Handle/Slide
Mt
408048-001AdapterPlate Mt
407349-02230.5 x 30.5cm
(12 x 12in) Artcld'M' Series Arm
w/Tlt-Swvl
or
Eagle
4000Optl
421837-001PRN50 Mt
410559-001Handle/Slide
Mt
408048-001AdapterPlate Mt
407349-02230.5 x 30.5cm
(12 x 12in) Artcld'M' Series Arm
w/Tlt-Swvl
or
Eagle
4000
Eagle
4000900304-008
Bottom Mtd Panw/Adapter
2007059-001Pedestal
Mt
Stand-UpMt Option
N2C ArtcldArm MtOption
N2B/3/4Artcl'd ArmMt Option
407349-03213in Channelw/Backing Plt
Fixed10° 30.48cm (12") Square
x .635cm (.25")Aluminum Plate
Various DASH Mount Options for Older NAD Flat Top MachinesDASH only Pedestal Mt 2007059-001DASH w/RAC2A & SAM Pedestal Mt 407349-021Articulating Arm Side Mt See Notes Below
Articulated Arm Mount Notes:1. All parts are purchased separately, NOT in kit form.Parts required are: pn 407349-016 17.8 cm (7 in) Wall Chnl w/Backing Plt,pn 407349-022 30.5 cm x 30.5 cm (12 in x 12 in) Pivoting/Articulating armand all mtg hardware.2. RAC2A Clamp-On mt, p/n 404757-001 is optional and ordered separately.3. Mounting kit can be used on NAD 2B, 2C, 4 and GS (not Fabius GS)Anesthesia machines. This kit cannot be used with the 2A because it doesnot have side attachment holes for the backing plate. Important - Some early Narkomed 4 machines, w/AVE style vent controller,may NOT have side 2-hole pattern. The absence of these two holes makethis mount configuration incompatible with these machines.
407349-021 Notes1. Mount, pn 407349-021, includes 30.5 cm x 30.5 cm (12 in x 12 in) pedestalw/mounting plate, and RAC2A adapter plates and all hardware.2. Mt has permanent 10° down tilt and does not swivel.3. Mounting kit can be used on all N2X, N4 and GS (not Fabius GS) anesthesiamachines w/flat top.
2007059-001 Notes1. Mount, pn 2007059-001, includes triangular Pedestal base[~30.5cm (12in)],Tilt/Swivel head w/3.2cm (1.25in) pipe, 12.7cm (5in) Mounting plate andcombination Counter Mt/Slide Plate Adapter.2. For use with Eagle 3000, must order 413030-013 Eagle 3000 Adapter Plateseparately.3. Mounting kit can be used on all N2X, N4 and GS (not Fabius GS) anesthesiamachines w/flat top.
~ 30.5 cm (12.0 in)Triangular Shaped Base
7.6 cm(3.0 in)
407349-021
DASH
x0002007059
-001DASH
x000
2007059-001
407349-021
OPTIONAL 404757-001
RAC 2AClamp-on Mount
407349-014
407349-02230.5 x 30.5cm
(12 x 12in) Artcld'M' Series Arm
w/Tlt-Swvl
407349-0167in Channel
w/Backing Plt
DASH
x000
SWIVEL
~61 cm(~24 in)
SWIVEL
20°
SWIVEL90°
90°
900069-055 SBS Pedestal
Mount(includes RAC
Adptr Plt)
Free-Standing, Pedestal-Mount Solar 8000/8000M w/Side-By-Side RAC (Shown on NAD 2C) 900069-055
Notes1. Kit, pn 900069-055, includes 30.5 cm x 30.5 cm (12 in x 12 in)pedestal, mounting plate, adapter plate and all mounting hardware.2. Mounting kit can be used on all N2X, 3 , 4 and GS (not FabiusGS) machines w/flat top.3. For stacking flat panel, use 2001623-001 mount. For stackingCRT, Solar base requires 2002555-001 Cover Plt Mt PLUSappropriate CRT adapter plate.4. The PRN50 can be positioned on top of the anesthesia machineusing the weighted pedestal base, pn 421837-001.
or
15"/17"
CRT
2001623-00115" Flt Pnl Dspl Mt
w/Tilt & Swivel(See notes below)
CRT(See notes below)
CRT Adptr Plt(Specific to CRT used,
see notes below)
2002555-001Cover Plate Mt
(See notes below)
North American Dräger N2B/C/4/GS - Top Mount Base & Displayw/Side Mounted Single or Dual Tram-Rac Seem Notes Below (See Note 6 For Important Information)
Notes1. All parts are purchased separately, NOT in kit form.2. Solar Base mount requires no parts, base sets on top.3. RAC mounting p/n's: 407349-016 17.8 cm (7 in) Channelw/Backing Plate, 404757-008 20.3 cm (8 in) Blank Arm, and404757-005 Clamp-On RAC mt. For Dual RACs add405154-009 Dual RAC Option.4. Display mounting p/n's: For mounting flat panel, use pn2001623-001. For mounting CRT, use 2002555-001 CoverPlate Mt PLUS appropriate CRT adapter plate.5. PRN50 mounting: writer can be mounted either on topusing weighted base pn421837-001, or side-by-side w/theRAC using pn 421358-002.6. Important - Some early Narkomed 4 machines, w/AVE stylevent controller, may NOT have side 2-hole patten. The absence of these two holes make this mounting configurationincompatible with these machines.
-or-
15"/17"
CRT
2001623-00115" Flt Pnl Dspl Mt
w/Tilt & Swivel(See notes below)
CRT Adptr Plt(Specific to CRT used,
see notes below)
2002555-001Cover Plate Mt
(See notes below)
404757-005Single RACClamp-on Mt(use 404757-001
for RAC2)
CRT(See notes below)
405154-009Dual RAC
Option
404757-00820.3cm (8in)
Blk Support Arm
407349-01617.8cm (7in)
Chnl w/BackingPlate
N2A - Slr8000(M) Top Mount Components for Stacked Base w/Either Flat Panel or CRT See Notes Below (See other pgs for N2B/C/4)
Notes1. All mounting components are purchased separately. Due to anesthesia equipment positioning, monitoring equipment can only be mounted on top of anasthesia machine, no side mounting.2. For Flat Panel Display mounting, use Stack Mount p/n 2001623-001. For CRT mounting, use Cover Plt Mount p/n 20025555-001 PLUS CRT Adapter Plate. Note: CRT Adapter Plates are specific to CRT used. If 15" MGD is used, adapter is included. If 17" CGD is used, adapter IS NOT included and MUST be ordered SEPARATELY. Also see note 4 below.3. The channel length depends on the model. N2A uses the 55.9 cm (22 in) channel.4. For CPUs manufactured before July 1996, a new top cover, p/n 415766-001 must be ordered to accomodate the cover plate mount. Units manufactured after July 1996, have inserts in top cover.5. Consideration needs to be given to overall height of anesthesia cart and added equipment. Some configurations may be taller than standard doorway height making cart entry/removal impossible.
900670-00155.9cm (22in)
Channel
2002720-001RAC Mount(Includes Both)
421358-012PRN50 Horiz
Chnl Mt
2003478-001 Surface Mtw/o 10° Tlt for Flt Pnl -or-2003479-001 Surface Mt
w/10° Tlt for CRT
or
15"/17"
CRT
2001623-00115" Flt Pnl Dspl Mt
w/Tilt & Swivel(See notes below)
CRT(See notes below)
CRT Adptr Plt(Specific to CRT used,
see notes below)
2002555-001Cover Plate Mt
(See notes below)
N2B/2C/4/GS - Slr8000(M) Top Mount Components for Stacked Base w/Either Flat Panel or CRT See Notes Below (See additional pgs for N2A)
Notes1. All mounting components are purchased separately. Can be used on N2B/C,3, 4 or GS (not Fabius GS) machines.2. For stacking flat panel, use 2001623-001 mount. For stacking CRT, Solarbase requires 2002555-001 Cover Plt Mt PLUS appropriate CRT adapter plate.3. The channel length depends on the model. The 2B/C/3/4 machines use a76.2 cm (30 in) channel. (The N2A machine uses a 55.9 cm (22 in) channel.)4. Top-mount components may also be used in conjunction with side-mountcomponents, as shown on additional pages.4. Consideration needs to be given to overall height of anesthesia cart and addedequipment. Some configurations may be taller than standard doorway heightmaking cart entry/removal impossible.
421358-012PRN50 MOUNT
900670-00230" CHANNEL
FOR 2B/2C/3/4 & GS2002720-001RAC MOUNT
(Includes Adptr Plt)
2003479-001Surface Mt w/10° Tilt
-or-
15"/17"
CRT
2001623-00115" Flt Pnl Dspl Mt
w/Tilt & Swivel(See notes below)
CRT Adptr Plt(Specific to CRT used,
see notes below)
2002555-001Cover Plate Mt
(See notes below)
900670-00230" Channel
N2B/2C/4/GS - Slr8000(M) Top & Side Mount Components forStacked Base w/Either Flat Panel or CRT See Notes Below (See Note 5 For Important Information)
Notes1. All mounting components are purchased separately. Can be used on N2B/C,3, 4 or GS (not Fabius GS) machines. See note 5.2. For stacking flat panel, use 2001623-001 mount. For stacking CRT, Solarbase requires 2002555-001 Cover Plt Mt PLUS appropriate CRT adapter plate.3. The channel length depends on the model.The 2B/C/3/4 machines use a 76.2 cm (30 in) channel.(The N2A machine uses a 55.9 cm (22 in) channel.)4. Consideration needs to be given to overall height of anesthesia cart and addedequipment. Some configurations may be taller than standard doorway heightmaking cart entry/removal impossible.5. Important - Some early Narkomed 4 machines, w/AVE style ventcontroller, may NOT have side 2-hole patten. The absence of thesetwo holes make the 900651-001 mount incompatible with these machines.
421358-012PRN50 Horiz
Chan Mt2003478-001Surface Mt
-or-
15"/17"
CRT
2001623-00115" Flt Pnl Dspl Mt
w/Tilt & Swivel(See notes below)
CRT(See notes below)
CRT Adptr Plt(Specific to CRT used,
see notes below)
2002555-001Cover Plt Mt
405154-009Dual RAC
Option
404757-005Single RAC
Clamp-On Mt(use 404757-001
for RAC2)
404757-00820.3cm (8in)
Blk Support Arm
407349-01617.8cm (7in)
Chnl w/BackingPlate
Flat Panel Display Mounting 12" x 12" Articulated Arm Kit 420855-013 8" x 8" Articulated Arm Kit 420855-014 No Longer Available, See 420855-013 (Shown on NAD 2C w/Rmt Dspl)
420855-013 Mounting Notes:1. Kit, pn 420855-013, includes 30.5 cm x 30.5 cm (12 in x 12 in) M Series Articulated arm, Power SupplyHolster, 33 cm (13 in) Wall Channel w/Univ Backing Plateand 20.3 cm (8 in) Blank arm.Flat panel display adapter plates are included w/flatpanel display.2. RAC Mount ordered separately. To mount RAC(s) usep/n 404757-005 for Single RAC and/or add p/n 405154-009for Dual RAC option.3. Flat panel mounting kits can be used on NAD 2B, 2C,4 and GS Anesthesia machines w/flat tops, NOT Fabius GS. See note 4 for additional information on NAD 4 machines.4. Important Note - Some early Narkomed 4 machines, w/AVE style vent controller, may NOT have side2-hole patten. The absence of these two holes makethis mount incompatible with these machines.
Flat Panel DisplayAdapter Plate(Generally included
w/Flat Panel Display)
420855-013 (12" x 12")Articulating Arm Kit
(Kit Consists of M SeriesArtcld Arm, 13" Channel
w/8" Blank Arm& Pwr Sply Hlstr)
RAC Mount(Ordered separately,
see notes below)
Solar Base Mounting.Sit on top or
use NAD TopMounting System
20.3 cm(8.0 in)
SWIVEL
~61 cm(~24 in)
SWIVELSWIVEL
90°
90°
90°
Flat Panel
Display
420855-011 (12")Pole Mtg Kit
(Kit Consists of Pivot Arm,7" Chan w/Pole Mt & Pwr Sup Hlstr)
Up to5.1cm (2in)
Pole Dia
Flat Panel DisplayAdapter Plate
(Generally includedw/Flat Panel Display)
Flat PanelDisplay
Flat Panel Pivot Arm Pole Mount 31.2 cm (12 in) Pivot Arm Kit 420855-011(6 in Pivot Arm Kit, 420855-012, No Longer Available, See 420855-011)
Notes1. Kit, pn 420855-011, includes 31.2 cm (12 in) M Series PivotBlock arm, Power Supply Holster and 17.8 cm (7 in) Wall Channelw/V-Block Pole Mount Clamp and all mounting hardware.2. This pole mount can be used on poles with diameters from2.5 cm (1 in) to 5.1 cm (2 in).3. Flat panel display Adapter Plates are usually included w/display.
~35.6 cm(14 in)
SWIVEL
SWIVEL
90°
90°
90°
407349-022 (12x12)M Series Articulated Armw/Manual Tilt & Swivel
404757-00820.3 cm (8 in) Blank
Support Arm(for Mtg Clmp-On RAC Mt)
2003483-001Wall Channel MountedPower Supply Holderfor Flat Panel Display
2004031-001Totoku 15" Flt Pnl Dspl
Adapter Plate
900651-001RAC Side Mount
(includes 20.3 cm (8 in) Blank Arm,17.8 cm (7 in) Chnl and Univ Backing Plt)
407349-016 7" Side Mounted Chnl
(includes 17.8 cm (7 in) Chanand Univ Backing Plt)
407349-032 13" Side Mounted Chnl
(includes 33 cm (13 in) Chanand Univ Backing Plt)
900670-00276.2 cm (30 in) Top Channel
(for N2B/C/3/4/GS Top Shelf)
900670-00155.9 cm (22 in) Top Channel
(for N2A Top Shelf)
2003479-001(replaces 900069-035)22.9 cm (9 in) Mtg Plt
w/10° Down Tilt
2002720-001(replaces 900069-044)
RAC Mount, Flat, w/No Tilt(includes 12.7 cm (5 in) MtgPlt and 1 RAC Adapter Plt)
900069-052Dual RAC Mount
Flat, w/No Tilt(includes 29.7 cm (11.7 in) Mtg
Plt and 2 RAC Adapter Plts)
407349-0277" Pole Mounted Chnl
(includes 17.8 cm (7 in) Chanand Pole Mount Clamp)
421358-012PRN50 Horiz
Channel Mount
2001760-001Planar 15" Flt Pnl Dspl
Adapter Plate(Included w/Display)
2003478-00122.9 cm (9 in) Mtg PltFlat w/No Down Tilt
421358-001PRN50 SlidePlate Mount
2002555-001 for 8000MCover Plate Mount* NOT AVAILABLE
FROM GCX *
2001622-001Horiz Rail Mountw/Tilt & Swivel forFlat Panel Display
2001623-001Slr8000/8000M Stack Mt
w/Tilt & Swivel forFlat Panel Display
Major Parts for Mounting on NAD Anesthesia Machines