clinically proven designs - qubyx.com · dvi vga bration dicom gsdf whitep. adjust lut ... it...
TRANSCRIPT
Rely on Optik View high definition diagnostic and reference displays to provide your Customer’s with industry’s highest quality medical visualization. Optik View Medical Displays conform to industry standards for DICOM Part 14, AAPM-TG18 and DIN 6868-157 for diagnostic and reference use. Radiologists and Clinicians will experience reliable operation and the consistent delivery of images with exquisite anatomic details over the life of the display.Monochrome and color displays are available in a range of MP resolutions and feature auto and self-calibration tools designed to streamline workflow and assure a consistent visualization experience.
Optik View | Radiology & PACS Optik View | Radiology & PACSFEATURE
04 05
Auto Luminance Stabilizer (ALS)
Replace with "The Auto Luminance Stabilizer (ALS) is based on a built-in sensor and delivers a consistent viewing experience by maintaining the preferred luminance over display lifetime. Moreover, luminance levels are stabilized shortly after system startup.
Front Sensor
An integrated front sensor can be used to measure the tonal response of the display. This allows accurate greyscale calibrations and validations in accordance with well-known standards like DICOM Part 14 GSDF. The sensor also serves as reference for the Auto Luminance Stabilizer, resulting in a very stable and reliable luminance output.When used wi th Per fec tLum, the Front Sensor streamlines workflow by negating the need for external hardware calibration tools.
PerfectLum
PerfectLum streaml ines workf low and improves oversight through server-based control, scheduling, and reporting through server-based Quality Assurance and Calibration software. This medical monitor quality control tool uses a guided software process, that leverages Front Sensor and ALS technologies found in Optik View displays, to simplify compliance with PACS Displays as defined by APM TG18, DIN 6868-57, new DIN 6868-157 Norm-Entwurf, JESRA X-0093, and IEC 62563-1.
Digital Uniformity Compensation
Digital Uniformity Compensation (DUC) significantly reduces differences in luminance distribution over the LCD panel. With deviations lowered to maximal 5%, thresholds defined by IEC62563-1 and DIN6868-157 are well met. Improve your diagnostic confidence through artifact-free visualization and enhancement of subtle findings.
DICOM Part 14
Grayscale Display Function Calibration. Decreases blooming and improves visualization of grayscale var iat ions through compliance with Medical Use Standards: NEMA & ACR
Optik View | Radiology & PACS Optik View | Radiology & PACSFEATURE
06 07
Self Calibration
Streamline your workflow and assure high-quality diagnostic visualization through one touch calibration and reporting of luminance, color temperature, and gamma. The Self Calibration function is OSD driven and negates the need for connecting the display to a PC with accordant calibration software.
Presence Sensor Ambient Sensor Universal Conformance
The presence sensor automatically dims the backlight when the user has left his workplace. As a result, the power consumption is decreased by up to 95%, extending backlight life too. The display immediately re turns to normal operat ion upon sens ing user presence.
By means of an ambient sensor, the display luminance can be adjusted automatically to actual ambient light conditions. Improve your viewing experience, even under changeable room light situations, without extra effort.
Optik View Displays are designed for reliable operation in medical use environments and conform to industry standards for medical use as defined by IEC60601-1, EMC, AAPM, and DIN-6868157/JESRA. Each display undergoes a rigorous multi-stage QA process and is accompanied with a Product Quality Report.
DDC/CI
By utilizing the DDC/CI protocol, display parameters like Contrast, Brightness, Color Adjustment, Recall Default, Black Level, Backlight and Auto Image Adjust can be easily changed remotely.
Serial RS232 Remote Control
Improve your workflow through remote control of important display parameters including power state. Communication with the display is realized via RS-232 interface, accompanied by precise protocol information.
Optik View | Radiology & PACS Optik View | Radiology & PACS
08 09**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
1MP 19"SXGA Color Clinical Display
The Optik View 1MP Color Display is designed for medical professsionals who require consistent image quality and reliable operation. Ideally suited for multimodality applications such as clinical review of X-ray, Ultrasound, CT, MRI, and PET images, this display can be mounted to an adjustable desk stand to improve ergonomics.
COLOR
432379.4
466.5
305
353
166
75.6
251
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Color with LED backlight
1280 (H) x 1024 (V)
19
376.32 (H) x 301.06 (V)
0.294 (H) x 0.294 (V)
170 (H) / 170 (V)
30 (on/off)
330 (typical)
1000:1(typical)
NTSC: 68%/ 72%, sRGB: 93%/ 102% | Panel specs.
1073M (10 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP, 1x VGA
-
-
-
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
Neutral/ Warm/ Cool/ User
R Gain/ G Gain/ B Gain
1.8/ 2.0/ 2.2/ DICOM/ Calibration
10 bit
-
Optional
Optional
Optional
-/ -/ -
Full Screen
-/ -/ -
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
-
-
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
45 (Max)/ 2 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
50 mm | Other stands available
-5 - 20/ 140/ 90 | Other stands available
432 x 466.5 x 251 (with stand)
8.3 kg (with stand)
100 x 100
White
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances CE(IEC/EN60601-1, IEC/EN60601-1-2)
Fanless ErgoScaling
DUCALSSelf Cali-brationDVI VGA
DICOMGSDF
Whitep.Adjust
LUT10bit
Feature | Available Optional
DP
SXGA
SXGA
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
10 11**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
377
607.5
473
89.6
269.9
71.9
2MP 21.3"UXGA Color Diagnostic Display
The Optik View 2MP Diagnostic Color Display is designed for imaging professsionals who require consistent image quality and reliable operation.This display offers unique processing abilities to faithfully display organs, tissue, bone and fluid in minute detail, providing radiologists and clinicians with the most accurate color and monochrome images for analysis and diagnosis.Commonly used for diagnostic and reference image review of X-ray, Ultrasound, CT, MRI, and PET images direct from modality imaging systems or via PACS, this display corforms to DICOM Part 14, AAPM-TG18 and DIN 6868-157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and self-calibation tools, this display will deliver consistantly bright, uniform, and Color accurate images.
COLOR
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Color with LED backlight
1600 (H) x 1200 (V)
21.3
432 (H) x 324 (V)
0.27 (H) x 0.27 (V)
178 (H) / 178 (V)
20 (on/off)
440 (typical)
1500:1(typical)
NTSC: 74%/ 75%, sRGB: 98%/ 106% | Panel specs.
16,7 million (8 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP 1.2, 1x VGA
-
1x Upstream, 2x Downstream
USB
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
Neutral/ Warm/ Cool/ User
R Gain/ G Gain/ B Gain
1.8/ 2.0/ 2.2/ DICOM/ Calibration
14 bit
170/ 250
Optional
Yes
Yes
Yes/ Yes/ Yes
Full/ 1:1/ 4:3/ 16:9/ 16:10
Yes/ Yes/ Yes
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
Yes
Yes
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
45 (Max)/ 1 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
80 mm | Other stands available
-5 - 25/ 140/ 90 | Other stands available
377 x 607.5 x 269.9 (with stand, pivot orientation)
11.3 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI
Fanless
LUT14bit
Ergo
Self Cali-bration
PIP RAPPOP
UXGA
UXGA
Scaling
USB HubDP 1.2DL DViVGA
PresenceSensor
FrontSensor
AmbientSensorDUCDICOM
GSDFWhitep.Adjust
HWCalibration
Feature | Available Optional
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
12 13**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
Ergo
Self Cali-bration
3MP 21.3"QXGA Color Diagnostic Display
The Optik View 3MP Diagnostic Color Display takes high resolution color and grayscale imaging to the next level. This display is ideally suited for PACS and Radiology departments requiring greater image detail. It supports Dual Link DVI input, a clock frequency of 60 Hz when displaying QXGA (1536 × 2048)resolution and frame synchronization between the computer and monitor to reproduce a smooth moving picture without frame loss.Commonly used for diagnostic and multi-modality image review of X-ray, Ultrasound, CT, MRI, and PET images via PACS, this display corforms to DICOM Part 14, AAPM-TG18 and DIN 6868-157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and self-calibation tools, this display willdeliver consistantly bright, uniform, and Color accurate images.
COLOR
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Color with LED backlight
2048 (H) x 1536 (V)
21.3
431.15 (H) x 324.86 (V)
0.2115 (H) x 0.2115 (V)
178 (H) / 178 (V)
30 (on/off)
1000 (typical)
1400:1(typical)
SC: 69%/ 72%, sRGB: 95%/ 102% | Panel specs.
1.07 billion (10 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP 1.2
-
1x Upstream, 2x Downstream
USB
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
Neutral/ Warm/ Cool/ User
R Gain/ G Gain/ B Gain
1.8/ 2.0/ 2.2/ DICOM/ Calibration
14 bit
300/ 400/ 500
Optional
Yes
Yes
Yes/ Yes/ Yes
Full/ 1:1/ 4:3/ 16:9/ 16:10
Yes/ Yes/ Yes
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
Yes
Yes
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
85 (Max)/ 2 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
80 mm | Other stands available
-5 - 25/ 140/ 90 | Other stands available
377 x 607.5 x 269.9 (with stand, pivot orientation)
11.3 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI
377
607.5
473
89.6
269.9
71.9
HWCalibration
PIP RAPPOP
LUT14bit
QXGA
QXGAScalingUSB HubDP 1.2DL DViVGA
PresenceSensor
FrontSensor
AmbientSensorDUCALSDICOM
GSDFWhitep.Adjust
Feature | Available Optional
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
14 15**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
6MP 30"WQSXGA Color Diagnostic Display
The Optik View 6MP Diagnostic Color Display takes high resolution color and grayscale imaging to the next level. This display is ideally suited for PACS and Radiology departments requiring greater image detail. It supports Dual Link DVI input, a clock frequency of 60Hz when displaying WQSXGA (3280 × 2048) resolution and frame synchronization between the computer and monitor to reproduce a smooth moving picture without frame loss.Commonly used for diagnostic and multi-modality image review of mamograpy, mammograpy combined with ultrasound, CT, MRI, and PET images via PACS, this display corforms to DICOM Part 14, AAPM-TG18 and DIN 6868-157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and selfcalibation tools, this display will deliver consistantly bright, uniform, and Color accurate images.
COLOR
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Color with LED backlight
3280 (H) x 2048 (V)
30
645.5 (H) x 403.05 (V)
0.197 (H) x 0.197 (V)
170 (H)/ 170 (V)
30 (on/off)
900 (typical)
1000:1(typical)
NTSC: 74%/ 85%, sRGB: 91%/ 98% | Panel specs.
1.07 billion (10 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 2x DP 1.2, 2x HDMI 2.0, 1x VGA
-
1x Upstream, 2x Downstream
RS232 (D-Sub 9pin)
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
5400K/ 6500K/ 7500K/ 9300K
R Gain/ G Gain/ B Gain
1.8/ 2.0/ 2.2/ DICOM/ Calibration/ sRGB/ AdobeRGB/ SMPTE-C/ Rec.709/ DCI
18 bit
200/ 300/ 400/ 500
-
Yes
Yes
Yes/ Yes/ Yes
Full Screen
-/ Yes/ Yes (DP+DP only)
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
Yes
Yes
Yes
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
148 (Max)/ 2.4 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
90 mm | Other stands available
-5 - 25/ -/ - | Other stands available
711.3 x 605.4 x 269.9 (with stand)
16 kg (with stand)
100 x 100, 100 x 200
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI
711.28
605.41 48
3.83
200
100
100
9545
Fanless
QXGA
QSXGAScalingUSB HubDPDL DVi
PresenceSensor
FrontSensor
AmbientSensorDUCALSDICOM
GSDFHW
CalibrationLUT
14bit
Feature | Available Optional
Ergo
Self Cali-bration
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
16 17**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
ErgoScaling
DUCSelf Cali-bration
1MP 19"SXGA Mono Clinical Display
The Optik View 1MP Clinical Monochrome Display is ideally suited for quick display and review of radiology images at the time of capture. This highdefinition, multi-functional model features a precise calibration compliant with DICOM Part 14 and can be easilty integrated with imaging workstations.
MONO
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Monochrome with LED backlight
1280 (H) x 1024 (V)
19
376.32 (H) x 301.06 (V)
0.294 (H) x 0.294 (V)
170 (H) / 170 (V)
30 (on/off)
1400 (typical)
1000:1(typical)
-
256 (8 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP, 1x VGA
-
-
-
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
-
-
1.8/ 2.0/ 2.2/ DICOM/ Calibration
10 bit
500
Optional
Yes
Optional
-/ -/ -
Full Screen
-/ -/ -
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
-
-
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
45 (Max)/ 2 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
50 mm | Other stands available
-5 - 20/ 140/ 90 | Other stands available
432 x 466.5 x 251 (with stand)
8.3 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances CE(IEC/EN60601-1, IEC/EN60601-1-2)
432379.4
466.5
305
353
166
75.6
251
Feature | Available Optional
Fanless
SXGA
SXGA
DP DVI VGA
ALS
DICOMGSDF
LUT10bit
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
18 19**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
2MP 20"UXGA Mono Diagnostic Display
The Optik View 2MP Diagnostic Monochrome Display is ideally suited for display of traditional radiographic images such as chest CR, DR and other imaging modalities requiring higher brightness and contrast performnce. This high-definit ion display features DICOM Part 14 compliant calibration to ensure consistent image quality over the life of the product and can be used as a PACS/ HIS/RIS point-of-use display.Commonly used for imaging applications where brightness and contrast are paramount, this two megapixel monochrome diagnostic display is ideal for displaying an entire chest CR or DR image. Delivering a high-definition and consistent viewing experience via DICOM Part 14 compliance, this highdefinition, multi-functional model ensures consistent image quality over the life of the product.Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSD-driven calibration and reporting function that negates the need for external calibration devices.
MONO
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
MVA Monochrome with LED backlight
1600 (H) x 1200 (V)
20.1
408 (H) x 306 (V)
0.255 (H) x 0.255 (V)
170 (H) / 170 (V)
30 (on/off)
1000 (typical)
1000:1(typical)
-
256 (8 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP 1.2, 1x VGA
-
1x Upstream, 2x Downstream
USB
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
-
-
1.8/ 2.0/ 2.2/ DICOM/ Calibration
14 bit
300/ 400/ 500
Optional
Yes
Yes
-/ -/ -
Full/ 1:1/ 4:3/ 16:9/ 16:10
Yes/ Yes/ Yes
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
-
Yes
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
45 (Max)/ 1 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
50 mm | Other stands available
-5 - 20/ 140/ 90 | Other stands available
453 x 469 x 246.4 (with stand)
9.2 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI
469
308.4
353
453410.4
71.8
246.4Sketches showing display in landscape orientation.
Feature | Available Optional
DL DVI
DUC
VGA
FanlessPIP PAPPOP
UXGA
UXGAScaling
USB Hub DP 1.2
ALS
LUT14bit
DICOMGSDF
HWCalibration
Ergo
Self Cali-bration
DDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
20 21**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
3MP 21"QXGA Mono Diagnostic Display
The Optik View 2MP Diagnostic Monochrome Display is ideally suited for display of traditional radiographic images such as chest CR, DR, and other imaging modalities requiring higher brightness and contrast performnce. This high-definit ion display features DICOM Part 14 compliant calibration to ensure consistent image quality over the life of the product and can be used as a PACS/ HIS/RIS point-of-use display.Commonly used for imaging applications where brightness and contrast are paramount, this three megapixel monochrome diagnostic display is ideal for displaying an entire chest CR or DR image. Delivering a high-definition and consistent viewing experience via DICOM Part 14 compliance, this highdefinition, multi-functional model ensures consistent image quality over the life of the product.Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSD-driven calibration and reporting function that negates the need for external calibration devices.
MONO
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Monochrome with LED backlight
2048 (H) x 1536 (V)
21.3
431.62 (H) x 323.71 (V)
0.21075 (H) x 0.21075 (V)
178 (H)/ 178 (V)
22 (on/off)
1700 (typical)
1400:1(typical)
-
1024 (10 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP 1.2
-
1x Upstream, 2x Downstream
USB
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
-
-
1.8/ 2.0/ 2.2/ DICOM/ Calibration
14 bit
300/ 400/ 500
Optional
Yes
Yes
Yes/ Yes/ Yes
Full/ 1:1/ 4:3/ 16:9/ 16:10
Yes/ Yes/ Yes
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
-
Yes
-
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
60 (Max)/ 2 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
90 mm | Other stands available
-5 - 25/ 140/ 90 | Other stands available
377 x 607.5 x 269.9 (with stand, pivot orientation)
11.3 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI
377
607.5
473
89.6
269.9
71.9
Feature | Available Optional
DL DVI
FrontSensor
PresenceSensor
PIP PAPPOP
QXGA
QXGAScalingUSB HubDP 1.2
AmbientSensor
LUT14bit ALS DUCDICOM
GSDFHW
Calibration
Ergo
Self Cali-bration
FanlessDDC/CIControl
Optik View | Radiology & PACS Optik View | Radiology & PACS
22 23**Optik View Display can be customized to meet your unique specifications.
**Specification are subject to change without notice.
5MP 21"QSXGA Mono Mammography Display
The Optik View 5MP Diagnostic Monochrome Display is ideally suited for the review of Mammography images. This display offers equisite resolution to enhnce visualization of fine details. Allowing radiologists and oncologists to accurately diagnose tissue abnormalities.Commonly used for review of Mammography images, this five megapixal monochrome diagnostic display is FDA certified and meets specifications for maximum and minimum luminance and grayscale standards defined by IEC62563-1 and DIN686-157 to improve diagnostic confidence through artifact free visualization and enhancement of subtle findings.Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSD-driven calibration and reporting function that negates the need for external calibration devices.
MONO
SPECIFICATIONS
ID Type Front Bezel Plastic
Panel specification
Type
Resolution
Active Screen Size (inch)
Display Area (mm)
Pixel Pitch (mm)
Viewing Angel (degree)
Response Time (ms)
Brightness (nits)
Contrast Ratio
Color Gamut CIE 1931(Coverage/Size)
Display Colors
IPS Monochrome with LED backlight
2560 (H) x 2048 (V)
21.3
422.4 (H) x 337.9 (V)
0.165 (H) x 0.165 (V)
170 (H)/ 170 (V)
25 (on/off)
1200 (typical)
1200:1(typical)
-
1024 (10 bit)
I/O Interface
Standard
Video
USB Hub
Service Interface
1x DVI, 1x DP + LAN RJ45
-
1x Upstream, 2x Downstream
RS232 (D-Sub 9pin)
Features
Color Temp.
User Color Adjust
Gamma Selection
Gamma LUT
Calibrated Brightness (cd/m2)
Self Calibration
Auto Luminance Stabilization
Uniformity Compensation
Sensors (Ambient/ Front/ Presence)
Scaling
Multi Display Mode: PIP/ PAP/ POP
OSD Languages
Monochrome Mode
Light Box
Self Test
-
-
1.8/ 2.0/ 2.2/ DICOM/ Calibration
18 bit
300/ 400/ 500/ 600/ Auto/ Range
Optional
Yes
Yes
Yes/ Yes/ Yes
Full/ 2x
-/ -/ -
English/ Spanish/ French/ German/ Italian/ Simple Chinese/ Japanese
-
-
Yes
Power RequirementsPower Supply
Power Consumption (W)
AC 100-240V
70 (Max)/ 3.5 (Off Mode)
Physical Characteristics
Protection Filter
Surface Treatment
Height Adjustment Range (mm)
Tilt/ Swivel/ Pivot (degree)
Dimensions (W×H×D) (mm)
Weight
VESA Mounting (mm)
Color
IP Class (Front/ Back)
-
-
90 mm | Other stands available
-5 - 25/ 140/ 90 | Other stands available
390.6 x 614.5 x 269.9 (with stand, pivot orientation)
12 kg (with stand)
100 x 100
Black
-/ -
Reliability
Operating Temperature (degree)
Operating Humidity (RH)
Storage Temperature (degree)
Storage Humidity (RH)
5 - 35
30% - 75%
-20 - 60
10% - 90%
Certifications and Compliances
cTUVus (ANSI/AAMI ES60601-1:2005+A2(R2012)+A1; CAN/CSA C22.2 No,
60601-1:14), FCC-B, CE (IEC/EN 60601-1, IEC/EN 60601-1-2), VCCI, CCC,
BSMI, FDA 510K
390.6
487.8
614.5
42
79
100
100
Feature | Available Optional
DP 1.2DL DVI
FrontSensor
PresenceSensor Scaling
FanlessPAPPOP
WQSXGA
WQSXGAHSB HubVGAHDMI 2.0
AmbientSensor
LUT18bit ALS DUCDICOM
GSDFWhitep.Adjust
HWCalibration
ErgoDDC/CIControl
R&D & MANUFACTURING
HEAD UARTERSSALES OFFICESALES OFFICE
HEAD UARTERS
2B Wing DriveCedar Knolls, NJ 07927
+973 983 8809
SALES OFFICE
Charlotte, NC 28277
+973 983 8809
Irvine, CA 92618
+714 878 1912
PROGRAM MANAGEMENT OFFICE
Egg Harbor Township, NJ
+609 399 4050
R&D MANUFACTURING
9F., NO.351, Sec. 2, Zhongshan Rd.,Zhonghe Dist., New Taipei City 235,Taiwan (R.O.C)