cme v200r009c02spc250 installation guide (standalone cme

CMEV200R009C02SPC250Installation Guide (Standalone CME for Windows)

DocumentVersion 01

Release Date 2010-11-20

Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without priorwritten consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respectiveholders.

Notice

The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Telephone: 0755-28560000 4008302118

Fax 0755-28560111

Issue 01 (2010-11-20) Huawei Proprietary and Confidential of 60

mailto:[email protected]

http://www.huawei.com/

CME V200R009C02SPC250 Installation Guide (Standalone CME for Windows)

About This Document

Author

Author Wang XiaoKang Date 2010-11-20

ReviewedBy

An Xiangbin, Zhang Xiaomao,Chen Huanjun, Qian Cheng, LuoShumin, Yan Hui, LianJie, WuHao

Date 2010-11-20

Tested By Cao JiaWu Date 2010-11-20

ApprovedBy

Zhang Xiaomao Date 2010-11-20

OrganizationIt is recommended that you read the installation guide of this version before using theV200R009C02SPC250. The following table lists the contents contained in this document

Chapter Description

1Overview This chapter provides the information related to the installation of the CME V200R009C02SPC250.

2Preparations This chapter describes the preparations for the installation of the CME V200R009C02SPC250 and related instruction.

3Installation of the Standalone CME

This chapter provides the guide to the installation of the CMEV200R009C02SPC250.

4GU Component Installation

This chapter provides the guide to installation the GU Component of the CME V200R009C02SPC250.

5Uninstallation of theStandalone CME

This chapter provides the guide to the uninstallation of the CMEV200R009C02SPC250.

6FAQs This chapter provides FAQs of the CME V200R009C02SPC250.



History

Version

Description Release Date

Prepared By

Approved By

V1.00 Initial commercial release 2010-11-20



Contents

1 Overview....................................................................................101.1 Impacts of the Installation Process on the Existing Program..........................................................................10

1.2 Match Standalone Mode Version.....................................................................................................................10

1.2.1 OS Versions............................................................................................................................................10

1.2.2 Database Version....................................................................................................................................10

1.2.3 Microsoft Office Version........................................................................................................................11

1.2.4 NE Versions............................................................................................................................................11

1.2.5 Mapping Between Software Packages and Versions..............................................................................14

2 Preparations...............................................................................152.1 Obtaining the Software Required for the Installation......................................................................................15

2.2 Installation Precautions....................................................................................................................................15

3 Installation of the Standalone CME..............................................3-13.1 Checking Before the Installation of the SQL Server......................................................................................3-1

3.2 Installing the SQL Server...............................................................................................................................3-2

3.3 Installing a New Standalone CME.................................................................................................................3-3

3.4 Verifying the Installation..............................................................................................................................3-11

3.4.1 Starting the CME Client......................................................................................................................3-11

4 GU Component Installation.......................................................4-124.1 Installing a CME Component Corresponding to a GU NE Version.............................................................4-12

5 Uninstallation of the Standalone CME........................................5-145.1 Uninstalling the Standalone CME................................................................................................................5-14

6 FAQs........................................................................................6-166.1 What Should I Do When the System Displays ".Net Framework 2.0 Is not installed" While Installing the Microsoft SQL Server 2005 Express?................................................................................................................6-16

6.1.1 Symptom.............................................................................................................................................6-16

6.1.2 Troubleshooting...................................................................................................................................6-17

6.2 What Should I Do When the System Displays 0x8007007e Error Message While Starting the SQL Server Configuration Manager?.....................................................................................................................................6-17

6.2.1 Symptom.............................................................................................................................................6-17




6.3 What Should I Do When the Name or Password of the Database User Is Changed After the Installation Is Complete?...........................................................................................................................................................6-17

6.3.1 Symptom.............................................................................................................................................6-17


6.4 How Should I Check Whether the Port Used in the SQL Server 2005 is Static Port?....................................18

6.4.1 Symptom.................................................................................................................................................18

6.4.2 Troubleshooting......................................................................................................................................18

6.5 How Should I Use the Static Port Instead of the Dynamic Port?....................................................................20

6.5.1 Sypmtom.................................................................................................................................................20


6.6 How Should I Make the SQL Server 2000 Compatible with the SQL Server 2005?......................................20

6.6.1 Symptom.................................................................................................................................................20


6.7 What Should I Do When the System Prompt Me to Use a Strong Password During the One-Click Installation of the SQL Server 2005?.....................................................................................................................22

6.7.1 Symptom.................................................................................................................................................22


6.8 What Should I Do When the SQL Server Installation Program Fails to Install Files to the Compressed or Encrypted Folder?..................................................................................................................................................23

6.8.1 Symptom.................................................................................................................................................23


6.9 How Should I Check the Installation of .net Framework2.0?..........................................................................24

6.10 How Should I Start and Stop the SQL Server Service?.................................................................................25

6.11 How Should I Back Up and Restore the Data of the Standalone Version?....................................................25

6.12 What Should I Do When the Script Engine VBScript Fails to Be Found During the Operation of the Standalone CME?..................................................................................................................................................26

6.12.1 Symptom...............................................................................................................................................26

6.12.2 Troubleshooting....................................................................................................................................26

6.13 What Should I Do When the System Prompts Me to Install Windows Installer 3.1 While Installing .net Framework2.0?......................................................................................................................................................27

6.13.1 Symptom...............................................................................................................................................27


6.14 How Should I Use Standalone Mode When I Did not Select the Server Components While Installating the CME?.....................................................................................................................................................................27

6.14.1 Symptom...............................................................................................................................................27


6.15 What Should I Do When Creating BTSs by Using the CME Takes a Long Time?.......................................27

6.15.1 Symptom...............................................................................................................................................27


6.16 What Should I Do When the System Displays "Provider cannot be found. It may not be properly installed" While Installing the CME?....................................................................................................................................31

6.16.1 Symptom...............................................................................................................................................31




6.17 What Should I Do When the CME Menu Item Is Not on the GUI of the M2000 Client After the CME Is Installed on the Windows 2008?............................................................................................................................32

6.17.1 Symptom...............................................................................................................................................32


6.18 What Should I Do When the System Displays "Cannot resolve the collation conflict between 'Chinese_PRC_CI_AS' and 'Chinese_PRC_BIN'" While Creating a BTS by Importing the BTS Data to the CME?.....................................................................................................................................................................33

6.18.1 Symptom...............................................................................................................................................33

6.18.2 Cause....................................................................................................................................................33


6.19 How Should I Check the Version Information of the MSDE?.......................................................................33

6.20 What Should I Do When I Cannot Manually Delete the Help_cme.hdx File in the Installation Directory After Uninstalling the Standalone CME?..............................................................................................................34

6.20.1 Symptom...............................................................................................................................................34

6.20.2 Cause....................................................................................................................................................34


6.21 What Should I Do When I Cannot Install the msxml6r During the Installation of the SQL Server?............35

6.21.1 Symptom...............................................................................................................................................35

6.21.2 Cause....................................................................................................................................................35


6.22 What Should I Do When Disk Space of the Default Installation Disk C Is Insufficient During One-Click Installation of the SQL Server?..............................................................................................................................35

6.22.1 Symptom...............................................................................................................................................35

6.22.2 Cause....................................................................................................................................................36


6.23 What Should I Do When A License Expires Because the System Time in the PC Is Not A.D Time?..........36

6.23.1 Symptom...............................................................................................................................................36

6.23.2 Cause....................................................................................................................................................36


6.24 What Should I Do When the SQL Server Service Fails to Be Started Because An Error Occurs During the Installation of the SQL Server?..............................................................................................................................36

6.24.1 Symptom...............................................................................................................................................36

6.24.2 Cause....................................................................................................................................................37


6.25 What Should I Do When I Cannot Uninstall the CME Program in the Control Panel After the CME Offline Installation Fails?...................................................................................................................................................38

6.25.1 Symptom...............................................................................................................................................38

6.25.2 Cause....................................................................................................................................................38


6.26 What Should I Do When the System Displays "Failed in starting CME service" While Starting the CME?...............................................................................................................................................................................38

6.26.1 Symptom...............................................................................................................................................38

6.26.2 Cause....................................................................................................................................................38




6.27 What Should I Do When the CME Installation Program Cannot Be Complete?..........................................38

6.27.1 Symptom...............................................................................................................................................38

6.27.2 Cause....................................................................................................................................................39


6.28 What Should I Do When a BSoD Is Displayed During the Installation of the SQL Server 2005 in Window XP?.........................................................................................................................................................................39

6.28.1 Symptom...............................................................................................................................................39

6.28.2 Cause....................................................................................................................................................39


7 Version Changes.........................................................................397.1.1 Feature Changes.....................................................................................................................................40

8 Solved Problems and Unsolved Problems......................................408.1 Solved Problems..............................................................................................................................................41

8.2 Unsolved Problems..........................................................................................................................................41

9 Appendix....................................................................................419.1 Preparation for the Upgrade.............................................................................................................................41



1 Overview

1.1 Impacts of the Installation Process on the Existing Program

If the CME V200R009 standalone or integrated mode is installed before, you need to uninstall it.

You must familiarize yourself with the CME V200R009C02SPC250 Release Notes.

The client software of the standalone mode is also applicable to the integrated mode.

1.2 Match Standalone Mode Version

1.2.1 OS Versions

OS Version Description

Client: Windows XP Windows XP professional with SP2

Client: Windows Vista Windows Vista with SP1

1.2.2 Database Version

Database System Version Description

Microsoft SQL Server 2005 Microsoft SQL Server 2005 with SP3

(Microsoft SQL Server 2005 is one version of MSDE)



1.2.3 Microsoft Office VersionFigure 1.1lists the Microsoft Office version required for implementing certain features of the CME V200R009C02SPC250.

Figure 1.1 Required Microsoft Office version

Device Version Description

CME client Microsoft Office Excel 2003 or 2007

If the required Microsoft Office version is not provided, the following features cannot be implemented:

2G/3G radio network planning (RNP) data import and export in .xls format

3G Iu/Iur negotiation data import and export

3G Iub negotiation data import and export

2G/3G base station reparenting

2G cell parameter import and export in .xls format

2G RNP import and export in .xls format

2G cell frequency import and export in .xls format

2G TRX device import and export in .xls format

2G BA list import and export in .xls format

2G negotiation data import

GUI data table export in .xls format

Hot cell feature

1.2.4 NE Versions

The CME supports the hot patch versions of the BSC6900, BSC6810, MBTS, NodeB and all patch versions of BSC6000.

For example:

If CME supports BSC6900V900R011C00SPC720, BSC6900V900R011C00SPH72# is supported by default.

NE Type NE Version

BSC6900 BSC6900V900R011C00SPC700(Corresponding components need to be installed.)

BSC6900V900R011C00SPC710

BSC6900V900R011C00SPC720

BSC6900V900R012C00SPC100(Corresponding components need to be installed.)

BSC6810 BSC6810V200R011C00SPC100

BSC6800V100R012C00SPC100

TGW TGW1000V100R002C01SPC000



MBTS BTS3900V100R002C00SPC030

BTS3900V100R002C00SPC060

BTS3900V100R002C00SPC070

BTS3900V100R002C00SPC080

BTS3900V100R002C00SPC100

BTS3900V100R002C00SPC120

BTS3900 V100R002C00SPC121

BTS3900 V100R002C00SPC130

NodeB BTS3812E-12AC-12AE-BTS3812AV100R010C01SPC100

BTS3812E-12AC-12AE-BTS3812AV100R011C00SPC200


BTS3812E-12AC-12AE-BTS3812AV100R012C00



DBS3800V100R010C01SPC100

DBS3800V100R010C01SPC200

DBS3800V100R011C00SPC100

DBS3800V100R011C00SPC200

DBS3800V100R011C00SPC300

DBS3800V100R011C00SPC500

DBS3800V100R012C00

DBS3800V100R012C00SPC100

DBS3800V100R012C00SPC200

BTS3900-BTS3900A WCDMA V200R010C01SPC300








BTS3900-BTS3900A-BTS3900L WCDMA V200R011C01SPC050






BTS3900-BTS3900A-BTS3900L WCDMA V200R012C00





DBS3900 WCDMA V200R010C01SPC300














DBS3900 WCDMA V200R012C00



BTS3900-1U WCDMA V200R010C01SPC300








BTS3900-1U WCDMA V200R012C00



DBS3900-1U WCDMA V200R010C01SPC300








DBS3900-1U WCDMA V200R012C00













Data configuration of GBTSs is incorporated into the data configuration of BSCs, and the GBTS versions are not displayed on the CME client. For details about the supported GBTS versions, see the BSC6000 or BSC6900 release notes.

The CME supports the hot patch versions of the BSC6900, BSC6000, BSC6810, MBTS, and NodeB.

1.2.5 Mapping Between Software Packages and Versions

Package Version

Setup.exe CME V200R009C02SPC250

SQLEXPR32_sp3_ENU.EXE

Install.bat

Microsoft SQL Server 2005 with SP3

CMEComponent_MBSC6900V9R11SPC700.exe BSC6900V900R011C00SPC700

CMEComponent_MBSC6900V9R12.exe BSC6900V900R012C00SPC100



2 Preparations

2.1 Obtaining the Software Required for the Installation

Download the CME software package at http://support.huawei.com/. After logging in to the website, choose Software Center > Version Software > Wireless Product Line > Wireless OSS > CME. Alternatively, you can obtain the software disk of CMEV200R009C02SPC250 Windows from Huawei.

CME Software

Directory and Name of the Software Package

Description

CME Software

setup.exe Download the Client(Include StandaloneMode).rar package, and then decompress it.

MSDE Software

\MSDE_Install\ Download the Client(Include StandaloneMode).rar package, and then decompress it.

Save the package to a local PC. This document takes the root directory of C:/ as an example.

Apply the license file for the standalone CME.

Apply license file from Huawei Technology Support Website http://support.huawei.com. The detailed path is SUPPORT > NOTICE > Software Bulletin. Then, search for the WCDMA RNC&NodeB&CME product common license notice.

2.2 Installation Precautions The CME standalone version can be installed only on an operating system of simplified

Chinese or English version.

Before installing the standalone CME V200R009C02, you need to install the Microsoft SQL Server 2005 Express.


http://support.huawei.com./

http://support.huawei.com/support/pages/editionctrl/catalog/ShowSoftDetail.do?actionFlag=displaySoftInfo&node_id=000001448615&web_doc_id=SW0000326450&colID=ROOTENWEB%7CCO0000000174

http://support.huawei.com/support/pages/editionctrl/catalog/ShowSoftDetail.do?actionFlag=displaySoftInfo&node_id=000001448615&web_doc_id=SW0000326450&colID=ROOTENWEB%7CCO0000000174

http://support.huawei.com/


The .net Framework2.0 or a later version needs to be installed for the installation of the Microsoft SQL Server 2005 Express. The .net Framework2.0 installation package is available in the dotNet Framework 2.0 folder in the installation CD-ROM of the Microsoft SQL Server 2005 Express.

If you have installed the standalone or integrated CME client on the local PC, uninstall the CME client first.

Installing the standalone CME client requires:

PC type Configuration

Windows XP (The lowest configuration)

CPU:1.6GHz/Memory:1G/Disk:4GB free space

Windows Vista (The lowest configuration)

CPU:2.0GHz/ Memory:2G/ Disk:4GB free space

Windows XP (The recommend configuration)


Windows Vista (The recommend configuration)




3 Installation of the Standalone

CME

It takes about three minutes to install the SQL Server. After the installation, it takes about eight minutes to install the standalone CME client.

3.1 Checking Before the Installation of the SQL Server

Step 1 If the Microsoft SQL Server 2005 or SQL Server 2000 is not installed before, install one by referring to section 3.2"Installing the SQL Server."

Step 2 If the Microsoft SQL Server 2005 Express database is installed, confirm the static port used on the SQL Server and obtain the port number by referring to section 6.4"How Should I Check Whether the Port Used in the SQL Server 2005." If a dynamic port is used, modify the port configuration of the used instance by referring to section 6.5"How Should I Use the Static Port Instead."

Step 3 If the SQL Server 2000 is installed, make it compatible with the SQL Server 2005 (if required) by referring to section 6.6"How Should I Make the SQL Server 2000 Compatible with the SQL Server 2005." If no compatibility is required, uninstall the SQL Server 2000.

Step 4 The default password for the one-click installation of the SQL Server is emsems. If you need to change the password, change the SAPWD value in the template.ini file in the one-click installation package. A strong password containing uppercase letters, lowercase letters, and numerals is required for the installation of the SQL Server.

Step 5 If the SQL Server need install on other disk except C, referring to section 6.22What Should I Do When Disk Space of the Default Installation Disk C Is Insufficient During One-Click Installation of the SQL Server?

Issue 01 (2010-11-20) Huawei Proprietary and Confidential Page 1 of 60


----End

3.2 Installing the SQL ServerStep 1 Copy the installation CD-ROM of the Microsoft SQL Server 2005 Express to a hard disk on a

local PC.

Step 2 Double-click Install.bat to perform one-click installation, as shown in Figure 1.1.

Figure 1.1 One-click installation of the SQL Server 2005

Figure 1.2 The installation is complete. Installation finished



----End

3.3 Installing a New Standalone CME

The standalone CME can be installed only in the Windows operating system. Therefore, do not install the standalone CME in other environments.

Before installing the standalone CME, suppose that the password of the SQL server user sa is emsems. Choose Start > Run, and then type cmd in the Run dialog box. Then, type sqlcmd -S127.0.0.1,1433 -Usa -Pemsems in the displayed interface. If 1> is displayed, you can infer that the database connection is normal. In such a case, type exit. If not, please check whether the sa password or the configuration of SQLServer 2005 was right.

If you change the default port to another port, you need to add the port number when run the sqlcmd command to access the non-default port; otherwise, the connection to the port fails. For example, if you change the default port to port 1434, you need to run sqlcmd -S127.0.0.1,1434 -Usa -Pemsems to access port 1434.

Double-click Setup.exe in the folder of the Windows resource manager. Do not use tools such as Total commander.

Step 1 Copy the installation package from the installation disk to a drive on the local PC.

Step 2 Open the installation package of the CME client, and then double-click CME_Install /setup.exe. A dialog is displayed, prompting you to select the language of the program. Choose Chinese (Simplified) or English, as shown in Figure 1.1.



Figure 1.1 Selecting the language

Step 3 After you click Next, the dialog box is displayed, as shown in Figure 1.1, prompting you to confirm the installation.



Figure 1.1 Installation preparation

Step 4 Click Next. The License Agreement dialog box is displayed, as shown in Figure 1.1.



Figure 1.1 License Agreement dialog box

Step 5 If you accept the terms in the license agreement, click Yes. Then, a dialog box shown inFigure 1.1 is displayed, prompting you to enter the user information which includes User Name, Company Name, and Serial Number. If you do not accept the terms, click Cancel to cancel the installation.



Figure 1.1 User information



Step 6 Click Next. A dialog box shown in Figure 1.1 is displayed, prompting you to specify the destination folder.

Figure 1.1 Specifying the destination folder



Step 7 Specify the destination folder and then click Next. A dialog box shown in Figure 1.1 is displayed, prompting you to confirm the installation of the components. Select both of CME Client and Client Assistant Daemon. Click Next.

Figure 1.1 Components to be installed

Step 8 Enter the MSDE database user name and password and port (default value is sa, emsems,1433) , and then click Next, as shown in Figure 1.1.



Figure 1.1 Database login information

Step 9 A dialog box is displayed, indicating that the wizard is ready to begin the installation.

Figure 1.1 Wizard ready for the installation



Step 10 Click Install to start the installation. The progress of installing the data files is displayed, as shown in Figure 1.1. The system will install database automatically.

Figure 1.1 Installation progress

Step 11 Click Finish to complete the installation and restart the computer.

----End



3.4 Verifying the Installation

3.4.1 Starting the CME ClientChoose Start > All Programs > Huawei CME > CME Client. A windows dialog box is displayed, as shown in Figure 1.1.

Figure 1.1 Starting the CME client

Click Browse to select a valid license file, then click OK to continue.

The license file should be applied in advance from Huawei company.

----End



4 GU Component Installation

Files of the most GU NE versions that are supported by the CME have been contained in the installation package of the standalone CME. You can install components corresponding to NE versions that are not frequently used on the standalone CME. For details about NE versions that need to install components, see section 1.2.4NE Versions.

4.1 Installing a CME Component Corresponding to a GU NE Version

To install a CME component corresponding to a certain GU NE version, perform the following steps:

Step 1 Obtain the component package.

Log in to http://support.huawei.com, download the Client(Include Standalone Mode).rar file package corresponding to the current CME version, and then decompress it to obtain the CME component package corresponding to a GU NE version from the Standalone Component directory. The following part takes the CMEComponent_MBSC6900V9R12.exe file that corresponding to BSC6900 V900R012C00SPC100 for example.

Step 2 Double-click the CMEComponent_MBSC6900V9R12.exe file to start decompression.


http://support.huawei.com/


Step 3 After the decompression is complete, a window is displayed, as shown in the following figure.Select a correct CME installation path, and then click Install.

Step 4 After the installation is complete, click OK



5 Uninstallation of the Standalone

CME

5.1 Uninstalling the Standalone CMEStep 1 Choose Start > Control Panel > Add or Remove Programs.



Figure 1.1 Selecting the CME

Step 2 Select the CME, and then click Change or Remove and confirm the operation.

Figure 1.1 Confirmation for removing the CME

Step 3 The uninstallation progress is displayed.

Figure 1.1 Uninstallation progress

Step 4 After the uninstallation is complete, check that the CME is removed from Control Panel.



Figure 1.1 Confirmation for uninstallation of the CME

----End



6 FAQs

6.1 What Should I Do When the System Displays ".Net Framework 2.0 Is not installed" While Installing the Microsoft SQL Server 2005Express?

6.1.1 SymptomThe system displays ".Net Framework 2.0 Is not installed" when the Microsoft SQL Server 2005 Express is being installed.

6.1.2 TroubleshootingInstall the NetFx20SP1_x86.exe program in the MSDE_Install\dotNet Framework 2.0 directory.

6.2 What Should I Do When the System Displays 0x8007007e Error Message While Starting the SQL Server Configuration Manager?

6.2.1 SymptomThe system displays "Cannot connect to WMI provider. You do not have permission… [0x8007007e]" when the SQL Server Configuration Manager is being started.

6.2.2 TroubleshootingCopy the framedyn.dll file from C:\WINDOWS\system32\wbem\ to C:\WINDOWS\system32\.



Note: If the root disk of Windows installation directory is in other disks, copy the file to the system32 directory in the corresponding disk.

6.3 What Should I Do When the Name or Password of the Database User Is Changed After the Installation Is Complete?

6.3.1 SymptomThe name or password of the database user is changed after the installation is complete.

6.3.2 TroubleshootingRun the Database Parameter Management.exe file in the \CME\Bin directory to modify the configuration parameters.



6.4 How Should I Check Whether the Port Usedin the SQL Server 2005 is Static Port?

6.4.1 SymptomA static port of SQL Server 2005 is required for the installation of the standalone CME. If the default instance is used during the installation, the static port number is 1433. If a command instance is used during the installation, a dynamic port is required. The SQL Server 2005 sets a port number when the system is started each time.

6.4.2 TroubleshootingStep 1 Check whether the port of SQL Server 2005 is static port.

1. Start the SQL Server Configuration Manager.

Figure 1.1 Starting the SQL Server Configuration Manager

2. Select the used instance, as shown in Figure 1.2. Then, double-click TCP/IP.

Figure 1.2 Selecting the used instance

3. On the IP Addresses tab page of the displayed TCP/IP Properties dialog box, if the values of all TCP dynamic ports are empty or 0, it indicates that a static port is enabled for the SQL Server 2005. Otherwise, it indicates that a dynamic port is used. In this case, use astatic port instead by referring to section 6.5"How Should I Use the Static Port Instead."



Figure 1.3 TCP/IP Properties dialog box

----End

Step 2 Obtain the port number.

You need to obtain the port number used in the SQL Server 2005 for the installation of the standalone CME. The default instance uses default port number 1433. You can confirm and obtain the port number by referring to Step 1"Check whether the port of SQL Server 2005 is static port."



6.5 How Should I Use the Static Port Instead ofthe Dynamic Port?

6.5.1 SypmtomA static port of SQL Server 2005 is required for the installation of the standalone version. If the default instance is used during the installation, the static port number is 1433. If a command instance is used during the installation, a dynamic port is required. The SQL Server 2005 sets a port number when the system is started each time.

6.5.2 TroubleshootingStep 1 Open the TCP/IP Properties dialog box in which the instances need to be configured by

referring to 6.4.2 IStep 1"Check whether the port of SQL Server 2005 is static port." in section 6.4"How Should I Check Whether the Port Used in the SQL Server 2005 is Static Port?"

Step 2 Disable all the configured TCP dynamic ports, and then change the TCP port number to the specified number.

Step 3 After the configuration, restart the SQL Server.

6.6 How Should I Make the SQL Server 2000 Compatible with the SQL Server 2005?

6.6.1 Symptom

6.6.2 TroubleshootingStep 1 Modify the one-click installation template and use a command instance.

1. Modify the template.ini file in the released MSDE installation package, and then changethe value of INSTANCENAM. MSSQLSERVER is the default instance name. If a command instance is to be used, you need to change MSSQLSERVER to a new value, for example, SQLServer2005.

2. Run the install.bat file. Figure 1.1 shows the template.ini file after the modification.



Figure 1.1 template.ini file after the modification

Step 2 Change the port number.

Change the port number to 1434 or other numbers (excluding the port number 1433, which has been used by the default instance) of the command instance by referring to section 6.5"How Should I Use the Static Port Instead of the Dynamic Port?" after the installation is complete.Figure 1.1 shows the information about the modified ports.



Figure 1.1 Modified port information

6.7 What Should I Do When the System PromptMe to Use a Strong Password During the One-Click Installation of the SQL Server 2005?

6.7.1 SymptomThe System prompts for a strong password during the one-click installation of the SQL Server2005, as shown in Figure 1.1.

Figure 1.1 Displayed dialog box asking for a strong password



6.7.2 TroubleshootingStep 1 Click Cancel in the dialog box shown in 6.7.1 IStep 1Figure 1.1,

Step 2 Change the password, namely, the SAPWD value in the template.ini file in the one-click installation package. The password must be a combination of uppercase letters, lowercase letters, and numerals, for example, OSScme11111111.

Step 3 Perform the one-click installation again and type the correct password when required.

----End

6.8 What Should I Do When the SQL Server Installation Program Fails to Install Files to theCompressed or Encrypted Folder?

6.8.1 SymptomThe system displays a dialog box indicating that the SQL Server installation program fails to install files to the compressed or encrypted folder, as shown as below.

Figure 1.1 Displayed dialog box

6.8.2 TroubleshootingStep 1 Double-click My Computer and find the path where the SQL Server is installed, for example,

in disk C.

Step 2 Right-click Local Disk (C), and then choose Properties from the shortcut menu. On the General tab page, check whether Compress drive to save disk space is selected. If it is selected, deselect it, and then click OK, as shown in Figure 1.1.



Figure 1.1 Deselecting Compress drive to save disk space

Step 3 Run the SQL Server installation program again.

----End

6.9 How Should I Check the Installation of .net Framework2.0?

Step 1 Choose Start > Control Panel. The Control Panel is displayed.

Step 2 Double-click Add or Remove Programs. The Add or Remove Programs window is displayed.



Step 3 In Currently installed programs, check whether a .net Framework2.0 or a later version is available. If a .net Framework2.0 or a later version is available, it indicates that the .net Framework2.0 is installed on the PC.

----End

6.10 How Should I Start and Stop the SQL Server Service?

Step 1 Choose Start > Run, and then type cmd.

Step 2 If you need to stop the SQL Server service, run the net stop MSSQLServer command, as shown in Figure 1.1.

Figure 1.1 Running the net stop MSSQLServer command

Step 3 If you need to start the SQL Server service, run the net start MSSQLServer command, as shown in Figure 1.1.

Figure 1.1 Running the net start MSSQLServer command

----End

6.11 How Should I Back Up and Restore the Data of the Standalone Version?

Step 1 Choose Huawei CME > Backup Restore.

Figure 1.1 Starting the backup and restore program

Step 2 In the displayed Backup/Restore cmedb dialog box, click Backup or Restore to perform therelevant operations.



Figure 1.1 Backup/Restore cmedb dialog box

----End

6.12 What Should I Do When the Script Engine VBScript Fails to Be Found During the Operation of the Standalone CME?

6.12.1 SymptomWhen the standalone CME is running, the system displays a dialog box indicating that the Script Engine VBScript file fails to be found.

6.12.2 TroubleshootingRun the regsvr32 vbscript.dll command for registration.

Figure 1.1 Running the vbscript.dll program



6.13 What Should I Do When the System Prompts Me to Install Windows Installer 3.1 While Installing .net Framework2.0?

6.13.1 SymptomWhile installing .net Framework2.0, the system prompts for the installation of Windows Installer 3.1.

6.13.2 TroubleshootingThe installation path of Windows Installer 3.1 is http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=889482FC-5F56-4A38-B838-DE776FD4138C

6.14 How Should I Use Standalone Mode When I Did not Select the Server Components While Installating the CME?

6.14.1 SymptomThe client components rather than the server components are selected for the installation of the CME. A standalone CME, however, is required later on.

6.14.2 TroubleshootingUninstall the pre-installed CME and then reinstall the CME. And select the server componentswhile installing the CME.

6.15 What Should I Do When Creating BTSs by Using the CME Takes a Long Time?

6.15.1 SymptomCreating BTSs by using the CME takes a long time.

6.15.2 TroubleshootingStep 1 Enable writing caching on the disk.

1. Right-click the hard disk in which the CME client is installed, and then choose Properties from the shortcut menu. A disk properties dialog box is displayed, as shown in Figure 1.1.



Figure 1.1 Disk properties dialog box

2. Click the Hardware tab, and then select the hard disk drive whose writing caching you want to enable.



Figure 1.2 Hardware tab page

3. Right-click the hard disk drive, and then choose Properties from the shortcut menu. In the displayed hard disk drive properties dialog box, click the Policies tab, and then select Enable write caching on the disk.



Figure 1.3 Policies tab page

Step 2 Set Power schemes to Always On to improve the CME performance.

Choose Properties > Screen Saver > Power…, and then set Power schemes to Always On in the displayed dialog box, as shown in Figure 1.1.



Figure 1.1 Power Options Properties dialog box

6.16 What Should I Do When the System Displays "Provider cannot be found. It may notbe properly installed" While Installing the CME?

6.16.1 SymptomThe system displays "Provider cannot be found. It may not be properly installed" during the installation of the CME.



6.16.2 Troubleshooting

Run the resgvr32 command to register the sqloledb.dll file in the C:\Program Files\Common Files\System\Ole DB\ path, as shown in Figure 1.1.

Figure 1.1 Registering the sqloledb.dll file

6.17 What Should I Do When the CME Menu Item Is Not on the GUI of the M2000 Client After the CME Is Installed on the Windows 2008?

6.17.1 SymptomAfter the CME is installed on the Windows 2008, the CME menu item is not on the GUI of the M2000 client.

6.17.2 TroubleshootingSave the following information as a file named thirdtools.ini to the C:\windows\system32 path. You need to replace the contents highlighted in red with the current CME installation path.

[CME]

AppPath=C:\Program Files\Huawei Technologies\CME\Bin\CMEMain.exe

AppParam=User,Ip,Port,Token,UserPrivileged

MenuName=CME

MenuShortcut=M

AccessKey=CMECurRead



Note: If the local PC runs on the 64-bit Windows 2008 operating system, you need to save thethirdtools.ini file to the C:\Windows\SysWOW64 path.

6.18 What Should I Do When the System Displays "Cannot resolve the collation conflict between 'Chinese_PRC_CI_AS' and 'Chinese_PRC_BIN'" While Creating a BTS by Importing the BTS Data to the CME?

6.18.1 SymptomThe system displays "Cannot resolve the collation conflict between 'Chinese_PRC_CI_AS' and 'Chinese_PRC_BIN'" when creating a BTS by importing the BTS data to the CME.

6.18.2 CauseThe Microsoft SQL Server2005 is not installed by strictly following the instructions in the upgrade guide.

6.18.3 TroubleshootingUninstall the Microsoft SQL Server 2005, and then re-install it by referring to section3.2"Installing the SQL Server."

6.19 How Should I Check the Version Information of the MSDE?

Step 1 Choose Start > Control Panel. The Control Panel is displayed.

Step 2 Double-click Add or Remove Programs. The Add or Remove Programs window is displayed, as shown in Step 3Figure 1.1.

Step 3 Check the version information from the installed programs list in the window.



Figure 1.1 Add or Remove Programs window

6.20 What Should I Do When I Cannot ManuallyDelete the Help_cme.hdx File in the Installation Directory After Uninstalling the Standalone CME?

6.20.1 SymptomThe Help_cme.hdx file in the installation directory cannot be deleted manually after the standalone CME is uninstalled

6.20.2 Cause The Help_cme.hdx file is the material of the standalone CME, and is opened by the Hedex software. Therefore, when you attempt to delete the Help_cme.hdx file in the installation directory after the standalone CME is uninstalled, the system displays a message indicating that the file cannot be deleted because it is in use.

6.20.3 TroubleshootingStop the Hedex services, and then delete the Help_cme.hdx file.



6.21 What Should I Do When I Cannot Install the msxml6r During the Installation of the SQLServer?

6.21.1 SymptomThe system displays a message indicating that the msxml6r file cannot be installed during theinstallation of the SQL Server.

6.21.2 CauseThe operating system of the PC is Windows XP SP3, and the msxml6r.dll version of the Windows XP SP3 system is later than the version to be installed. Thus, the msxml6r.dll cannot be replaced by the previous version.

6.21.3 TroubleshootingClick OK.



6.22 What Should I Do When Disk Space of the Default Installation Disk C Is Insufficient During One-Click Installation of the SQL Server?

6.22.1 SymptomThe disk space of the default installation disk C is insufficient during one-click installation of the SQL Server.

6.22.2 CauseThe default installation path of one-click installation of SQL Server is C:\Program Files\Microsoft SQL Server\. However, the disk space of disk C is usually insufficient. Thus, the installation of the SQL server may fail, or the later installation of the standalone CME may fail.

6.22.3 TroubleshootingNavigate to the installation path of the SQL Server, and then modify the INSTALLSQLDIR parameter in the template.ini configuration file.

6.23 What Should I Do When A License Expires Because the System Time in the PC Is Not A.D Time?

6.23.1 SymptomA license expired because the time adopted by the PC is not A.D. time.

6.23.2 CauseLicenses adopt A.D time, for example, 2010-01-01.

6.23.3 TroubleshootingChange the system time in the PC to A.D. time.



6.24 What Should I Do When the SQL Server Service Fails to Be Started Because An Error Occurs During the Installation of the SQL Server?

6.24.1 SymptomThe SQL Server Service fails to be started because an error occurs during the installation of the SQL Server.

6.24.2 CauseThe failure to install the SQL Server results in the failure to start the SQL server service. The SQL server may fail to be installed because any of the following causes:

Another version of SQL Server has been installed before.

The files are not deleted completely during the uninstallation of the previous SQL Server.

Registration information cannot be deleted during the uninstallation of the previous SQL Server.



6.24.3 TroubleshootingStep 1 Install Windows installer clean up software. Use the Windows installer clean up program

to clear all the application related to the SQL Server and MSDE.

Step 2 Uninstall the SQL server by running uninstall.bat.

Step 3 Restart the PC and then install the SQL Server again.

Uninstall.rar Windows installer clean up .exe

6.25 What Should I Do When I Cannot Uninstallthe CME Program in the Control Panel After the CME Offline Installation Fails?

6.25.1 SymptomAfter the CME offline installation fails, the CME program cannot be uninstalled in the Control Panel.

6.25.2 CauseErrors occur in the registration information because the CME fails to be installed or other exceptions occur during the installation of the CME.

6.25.3 TroubleshootingClear the installation directory of the CME, and then re-install the CME.

6.26 What Should I Do When the System Displays "Failed in starting CME service" While Starting the CME?

6.26.1 SymptomThe system displays "Failed in starting CME service" When starting the CME.

6.26.2 CauseThe CmeServer service is not registered.



6.26.3 TroubleshootingRun Server\Bin\RegisServer.bat to register the CmeServer service, and then restart the CME.

6.27 What Should I Do When the CME Installation Program Cannot Be Complete?

6.27.1 SymptomThe Finish dialog box is not displayed at the end of the CME installation process. The Setup.exe process still runs in the Windows task manager.

6.27.2 CauseA third-party program such as a program for remote access cannot be stopped because the program is suspended. Therefore, the information of the CME cannot be registered through the Setup.exe process.

6.27.3 TroubleshootingOpen the Windows task manager and stop suspended programs such as mstsc.

6.28 What Should I Do When a BSoD Is Displayed During the Installation of the SQL Server 2005 in Window XP?

6.28.1 SymptomDuring the installation of the SQL Server 2005 in Windows XP, a blue screen of death (BSoD) is displayed.

6.28.2 CauseAccording to the explanation of the Microsoft, the SQL Server 2005 software conflicts with the Windows XP operating system.

6.28.3 TroubleshootingUpgrade Windows XP to Windows XP Service Pack 3.



7 Version Changes

This chapter describes the changes in features, MML scripts, alarms, and performance counters.. The Standalone CME includes all the changes in features of Integrated CME by default. This chapter describes the changes in features only in Standalone CME.

7.1.1 Feature Changes

New Features1. The script executor automatically identifies the NEs in the project configuration file

exported from the CME in standalone mode.

Description The script executor automatically identifies the NEs in the project configuration file exported from the CME in standalone mode.

Improvement By FDN or NE name, the script executor can identify the NEs in the project configuration file exported from the CME in standalone mode.

Implementation

When loading scripts, the script executor can identify the NEs by FDN or NE name.

Related Operation

1. Export the script.zip, the project of the script executor, from the CME in standalone mode.

2. Replace the name marked in red in "<Script taskId="1" neName="dss170" ...>" in the scriptcfg.xml file of the script.zip package with the name of the actual NE to be delivered on the M2000.

3. On the CME in integrated mode, load the project through the script executor and activate the project.

PR Number DTS2010071601222

Feature ID None



8 Solved Problems and Unsolved

Problems

This chapter describes the solved problems and unsolved problems. The Standalone CME includes all the solved problems an unsolved problems of Integrated CME by default. This chapter describes solved problems and unsolved problems only in Standalone CME.

8.1 Solved ProblemsNone

8.2 Unsolved ProblemsNone

9 Appendix

9.1 Preparation for the Upgrade

Item Description

Remarks

Name of the upgrade device

Location of the upgrade device



Upgrade date and period allowed

Requirements for the upgrade

Equipment version before the upgrade

Equipment version after the upgrade

Requirements for versions of other NEs

Upgrade personnel The persons that execute the upgrade. Generally, personnel of the office and Huawei are involved.

Related assistants For example, maintenance engineers of other NEs and network planning engineers required for the drive test.

Person in charge of the upgrade

Name and contact number of the person in charge of this upgrade.


cme v200r009c02spc250 installation guide (standalone cme

Documents