cmp triton deluge proof cable glands

7/29/2019 CMP Triton Deluge Proof Cable Glands

1/6


2/6

E A S E O F I N S T A L L A T I O N A N D C R U C I A L C A B L E C A R E

TRITONTM d e l i ve r s a u n i q u e co n ce p t i n ca b l e sea li n g t e ch n i q u e s in co rp o r a t i n g t h e p a t e n t e d C o m p e n sat i n g D i sp l a ce m e n t S e al sys t e m , CDSTM

I n t r o d u c e d t o e f fe c t i v e ly h a n d l e al l t y p e s a n d s iz e s o f c a b le c o n s t r u c t i o n t a k i n g t h e c o n c e r n o u t o f t h e m i n d o f t h e o p e r a t o r , l e t t i n g t h e

p r o d u c t d o t h e j o b i n st e a d . T h i s c o n c e p t p r o v i d e s e ff e c t i v e s e al i n g o n t h e c ab l e i n n e r s h e at h , u t i l i si n g a p r o v e n r e l i ab l e an d r o b u s t

e x p l o s io n p r o o f s e a li n g d e v ic e i n s t a ll e d w i t h a b e s t i n c l a ss m a n n e r . T ak i n g a c r u c i a l c ab l e c a r e p r i n c i p al i n t o a c c o u n t i n i t s d e s i gn , t h i s

c o n c e p t l e a v e s n o t h i n g t o c h a n c e y e t d e l i v e r s t h e u l t i m a t e i n a ss e m b l y a n d i n s t a l la t i o n s i m p l i c it y t h a t g u a r a n t e e s a sa fe t y l e v e l t h a t i s

unsurpassed by i ts r ivals.

T h i s la t e s t d e ve l o p m e n t i n a l o n g l i n e o f o r i g i n al ca b le g la n d so l u t i o n s fr o m C M P Pro d u c t s i s d e s i gn e d a n d f u l l y ap p ro ve d t o t h e l a t e s t E u ro p e a n

N o r m a t i ve s ( EN ) EN 5 0 0 1 4 , E N 5 0 0 1 8 , E N 5 0 0 1 9 & EN 5 0 2 8 1 .TRITONTM CDSTM com pl ies f u l l y w i t h t he Essent ia l H ea l th & Safe t y Requ i r em ents

d e t a i le d i n A n n e x I I o f D i r e c t i v e 9 4 / 9 /E C ( A T E X 9 5 ) i n r e l a t i o n t o t h e d e s i gn a n d c o n s t r u c t i o n o f e q u ip m e n t i n t e n d e d f o r u s e in p o t e n t i a ll y

e xp l o s i ve a t m o sp h ere s . T h i s co m p l ia n ce co ve rs n o t o n l y t h e t r a d it i o n a l p ro t e c t i o n r e q u i r e d a ga in s t i gn i t i o n o f G a s an d Vap o u r s , b u t a lso t h e l at e s t

D u st H a za rd p ro t e c t i o n . T h i s e n ab l es t h e p ro d u c t t o b e C E m a rke d an d co d e d w i t h a n A T E X C a t e go r y 2 G as an d D u st m a rk i n g, a n d it i s e ff ec t i ve ly

l ab e l le d Ex I I 2 G D . C l o se co n s id e ra t i o n sh o u l d g o t o t h e f ac t t h a t TRITONTM CDSTM h a s b e e n t e s t e d an d a p p ro ve d w i t h t h e m i n i m u m l e ve l o f

l im i t a t i o n s o f ce r t i fi cat i o n p o ssi b le , p e r t i n e n t ly t h e f e we s t o n t h e m a rke t - without any equal.

THE UNIQUE COMPENSATING DISPLACEMENT SEAL (CDSTM) SYSTEM DEMONSTRATED

A Fu ll y funct iona l 3D V i r t u a l Real i t y D emo nst ra t ion o f t he TRITONTM CDSTM Cable Gland and Cable Instal lat ion procedure is avai lable on request .

DESIGN FEATURES & BENEFITS

INNER EXPLOSION PROOF SEAL

U n i q u e n e w C o m p e n sa t in g D i sp l ace m e n t Se al (CDSTM) sys tem, com pat ib le w i th a l l t ypes o f cab le .

A t t h e c r i t i ca l ca b l e se a l i n g p o i n t t h e CDSTM s y st e m p r o t e c t s t h e c a b l e in n e r s h e at h f r o m a n y ex c e s s fo r c e , w h i c h i s t r a n sf er r e d t o a n da b so r b e d b y t h e i n t e rn a l co m p e n sa t o r i n co r p o r a t e d in t h e CDSTM system.

A l low s the C able G land t o be t ightened face to face every t im e regardless of cable diameter.

ARMOUR TERMINATION

M u l t i p l e Un i ve r sal A rm o u r C l am p f o r Si n gl e W i re A rm o u r , St e e l T ap e A rm o u r & B ra id e d ca b l es .

DELUGE SEAL

P roven, re l i ab le O R ing ar r angemen t w h ich i s con cea led and pro t ected f ro m dam age af te r i ns ta ll at i o n ,

and dur ing serv i ce .

OUTER SEAL

C losure range accepts a l l commonly used cab les in t he indust ry .

Can be t i gh tened face too face w i th a spanner every t ime,un l i ke the sub jec t i ve hand t i gh t i ns ta l l a t i on o f our compet i t o rs .

Figure 1 - W h e n a sm a l le r d i a m e t e r ca b le i s i n st a l le d

t h e i n n e r co m p e n sat o r i s ef fe c t e d t o a l e sse r e x t e n t

Figure 2 - W h e n a l arg e r d i a m e t e r ca b l e is i n st a l l e d ,

t h e i n n e r co m p e n sat o r i s e f fe c t e d t o a gre a t e r e x t e n t

C D S C O M PEN SATO R C D S C O M PEN SAT O R


3/6

Internationally Recognised Approvals

C E N EL EC / A T EX ap p r o v e d w i t h m i n i m u m

l im i ta t ions fo r safe use.

Fu l l y meets the tes t requ i rements o f EEx nR

e q u i p m e n t o r a p p a r a t u s w i t h R e s t r i c t e d

Breathing features.

Sh e l l D e l u ge Te s t e d t o D T S 0 1 :9 1 , a ft e r 2 0

years s imulated accelerated ageing.

C able Glands rated IP66, IP67 to EN 60529:1992

as s t anda rd , & I P 68 t o a dep t h o f 10 m e t r es.

EM C Tes ted to EN 55022 by SGS Independent

Test Labo r a t o r y

A N Z E x A p p r o ve d

C S A A p p r o v ed

U L L i st ed f o r M a r i ne us e .

G O ST A p p r o v ed

D N V A p p r o ve d

A B S A pp r ov ed

L l oy ds A pp rov ed

C EP EL / I N M E T RO app rov al pend i ng

ANZEx APPROVAL DETAIL

A U ST R A LIA - N E W Z E A LA N D ( A N Z Ex ) A PPRO V A L : A N Z Ex 03 .3 00 1- 0X

C O D E O F PRO T EC TIO N C AT EG O RY : Ex d IIC / Ex e II, D IP A 21 IP66 / IP68

C O M PLIA N C E STA N D A RD S : IEC 60 07 9-0 :19 98 , 600 79-1 :200 1 , 6007 9-7 :2 001

: IEC 6 1 2 4 1 - 1 -1 :19 9 9 ,6 0 5 2 9 :1 9 8 9

CSA APPROVAL DETAIL

C SA A PPRO VA L C ERT IFIC AT E : 13 105 17

C SA C O M PLIA N C E C O D E : C 22 .2 N O 0-M 1 991 , 17 4-M 198 4 ,

: C A N /C SA E7 9- 0 - 2 0 01 , E79 - 1 - 2 00 1

H A Z A RD O U S A REA C LA SSIFIC AT IO N : Z O N E 1 , C LA SS I, II, II, C LA SS I, D IV 2,

: GRO UPS A, B,C ,D , CLASS I I,D IV 2 ,GRO UPS E,F,G;: EN C L O SU R E T Y P E 3, 4 , & 4 X , C L A S S I II

C SA C O D E O F PRO T EC T IO N : Ex d IIC & Ex e II

UL LISTING DETAIL

U L L IST IN G : E2 001 63

C O M PLIA N C E C O D E : U L51 4B

C LA SSIFIC AT IO N : O RD IN A RY A N D W ET LO C AT IO N S LIST ED

GOST APPROVAL DETAIL

G O ST A PPRO VA L C ERT IFIC AT E : 20 02 .C 25 6

C O M PLIA N C E C O D E : 60 079 -0 -98 , 600 79-1 -9 9 , 6 007 9-14-96

H A Z ARD O U S A REA C LA SSIFIC AT IO N : Z O N E I, Ex d IIC & Ex e II

MARINE APPROVAL DETAILAM ERIC A N BU R EAU O F SH IPP IN G ( ABS) : 0 1 - L D 2 3 4 4 0 1 -PD A

LLO Y D S REG IST ER SH IPPIN G (LRS) : 01 /001 72

D ET N O RSK E V ERITA S (D N V ) : E-615 7

Special Conditions for Safe Use

There are t wo special conditions for safe use detailed in th e ATEX / C EN ELEC hazardous area cert ification for the TRITONTM CDSTM cable gland. The first, w hich is a condition applied to allnon-com pound fil led solutions fro m all cable gland m anufacturer s,is as follows:

"In respect of D irect Entr y Ex d situations, the Type T3C D S Cable Gland shall not be used w ith G rou p IIC Enclosures that have a free volum e that exceeds 2000 cm 3"

The second is where CMP Products take the lead,which details the maximum temperature rating applicable specifically to this range of cable glands,which far exceeds that of its competitorsnearest equ iva len t s tandard p r oduc t , and is:

"The Type T3CDS Cable Gland shall not be used on enclosures where the temperature,at the point of mounting,exceeds 130C"

I t i s im p o r t a n t t o n o t e t h a t u n l i k e i t s n e ar e s t r i v a ls t h e C M P TRITONTM CDSTM p r o d u c t d o e s n o t h av e a l i m i t a t i o n f o r s afe u se i n r e sp e c t o f e x te r n a l c ab l e c l am p i n g , w h i c hmakes th is p roduc t the m os t ve rsa t i le Cab le G land so lu t io n o f i t s type avai lab le .

T he TRITONTM CDSTM pro duc t has fewer Spec ial Co nd i t ions fo r Sa fe Use than any o the r D e luge Proo f C ab le G land .

A s a l l Sp e c i a l C o n d i t i o n s f o r Sa fe U s e sh o u l d b e c o n s i d e r e d a n d t a k en i n t o a c c o u n t d u r i n g t h e se l e c t i o n p r o c e s s f o r a n y h a za r d o u s a r e a e q u i p m e n t , C M P p r o m o te t h efo l low ing recom mendat io n . P lease ask fo r t h is in fo rm at ion f rom a l l manu factu r e rs in advance o f pu rchasing p ro duc t , be fo re i t i s to o la te !

TRITONTM CDSTM Cable Gland Type T3 CDS

TECHNICAL SPECIFICATIONS

TYPE :T3 CDS

PRO C ESS C O N T RO L (Q A ) SY ST EM : BS EN ISO 90 01

T EM PERAT U RE RAT IN G : -6 0 C T O + 1 3 0CIN G RESS PRO T EC T IO N : IP66 , IP6 7 & IP68 T O BS EN 6 05 29

IN G RESS PRO T EC T IO N (IP) C ERT. : 0 0AT EX 1 14 8

D ELU G E PRO T EC T IO N : TO D T S 0 1 : 19 91

D ELU G E T EST C ERT IFIC AT E : IT S 01 00 50 29

D ESIG N SPEC IFIC AT IO N : G EN ERA LLY IN A C C O RD A N C E W IT H BS 61 21

EN T RY T H REA D SPEC IFIC AT IO N : BS 604 23

C A BLE G LA N D M AT ERIA L : BRA SS (O T H ER M AT ERIA LS & FIN ISH ES REA D ILY A VA ILA BLE)

SEA L M AT ERIA L : SO LO TM LO W SM O K E & FU M E

SEA LIN G A REA ( S) : IN N ER & O U T ER SH EAT H

A RM O U R C LA M PIN G : REV ERSIBLE A RM O U R C O N E & U N IQ U E T RU LY U N IV ERSA L REV ERSIBLE C LA M PIN G RIN G

C A BLE T Y PES : S.W .A ., S.T.A ., & W IRE BRA ID

CENELEC APPROVAL DETAIL

C EN ELEC A PPRO VA L C ERT IFIC A T E : SIRA 0 0AT EX 1 14 8X

C O M PLIA N C E C O D E : EN 5 00 14 , EN 50 01 8 , EN 50 01 9 , & EN 50 28 1 1 1 -1 :1 99 8

H A Z A RD O U S A REA C LA SSIFIC AT IO N : EEx d / EEx e EQ U IPM EN T Z O N E 1 , Z O N E 2 , Z O N E 2 1 , & Z O N E 22 - G A S G RO U PS IIA , IIB , IIC

C O D E O F PRO T EC T IO N : II 2 G D (EEx d IIC / EEx e II)

Q .A . N O T IFIED BO D Y : SIRA (0 51 8)


4/6

PRACTICAL INSTALLATION BENEFITS

Fu l ly sequent ial , t h r ee step make o f f p ro cedur e

Q uick and easy assemb ly process, w i th face to face ins ta l la t ion ever y t ime C M P m ake no exagge ra t ed c l ai m s co nce rn i ng i t s speed o f i n st a l l at i o n bu t guaran t ee a R i gh t F i r s t T i m e i n s t al l at i o n w e l l w i t h i n t h e h i ghest

expec t a t i ons p r esc r i bed .

T h i s R i gh t F i r s t T i m e I nst a l la t i on co ncep t , he l ps t o r educe dow n t i m e du r i ng p lan t cons t r uc t i on w h i l st i n s t i l li ng peace o f m i nd i n t he u se r. The r isk o f damage to the cable inner sheath is eliminated, regardless of the cable construction, even though the CDSTM sealing system is fully tightened every time.

E M C N o i se Reduc t i on l evel s f o r r ad i at i on em i ss ions com p l y w i t h cu r ren t E u ro pean gu i de l i nes. (p ro v i d i ng i n t he reg ion o f 50db at t enua t i onw hen t e rm i nat ed w i t h screened cab l e ) .

C o n t i n u o u s O p e r a t i n g Te m p e r a t u r es fr o m 6 0 C t o + 1 3 0 C .

C om p l ies w i t h Lo w V o l t age D i rec t i ve 73 / 23 / E EC Un i f o rm hexagon p ro f i l e

HOW TO ORDER

Please use the or der ing re ference num ber s in the tab le be low for s tandard br ass cab le glands. A s there are anum be r o f po ssi b l e com b i na t i ons o f t h read s i ze var i a t i o ns , m a t e r i a l , and fi n i shes ava i lab l e f r o m C M P, i t i sr ecom m ended when o rde r i ng , t ha t t he f o l l ow i ng i n f o rm a t i on shou l d be p rov i ded :

C ab le Gland Size , C ab le Gland Type,Th read S ize , M ater ia l ,F in i sh ( i f app l icab le)

e .g . 32 T 3C D S 1 " N P T B rass N i ckel Pl at ed

OPTIONS

Vers ion fo r e f fec t i ve te r m inat ion o f l ead sheathed cab les, des ignated Type T3 C D SPB .

I n t eg ra l En t r y T h read Sea l, w h i ch rem oves t he need f o r separa t e sea li ng washe rs .

D esi gna t ed T ype RT 3C D S o r RT 3C D SP B, t he advan t ages o f t h i s op t i on a re :

i . A cc i den t a l om i ssi on o f loo se sea ls is p reven t ed .

i i. M echan i ca ll y enc losed , U V p ro t ec t ed seal , e l i m i nat es t he r i sk o f seal dam age .

i i i. Length o f t h r ead engagemen t m axim ised by v i r t ue o f reduced seal t h i ckness.

Note: Care should be taken to ensure a sui table seal ing area is avai lable on

the equ ipment the cab le g land i s be ing used wi th when th is op t ion i s spec i f i ed .

Other Complementary Cable Gland Solutions and Associated Accessories

Other Materials: C M P P r o d u c t s o f fe r c ab l e g l an d s i n M a r i n e B r a s s, B r a s s w i t h E le c t r o l e ss N i c k e l Pl at e d f i n is h ,

Sta in le ss Ste e l , C o p p e r F re e A lu min iu m & N o n -M e ta l li c .

C M P St andard accesso r i es i nc l ude Lo cknu t s , Se r r a t ed W ashe rs , Ea r t h T ags, E n t r y T h r ead Seal ing W ashe rs , i n avar ie t y o f mater ial s and fin i shes, to gether w i th PVC and SO LO LSF Shro uds.

C M P P r o d u c t s i s al so a b le t o o f f er a w i d e r a ng e o f T h r e ad C o n v e r s io n A d ap t o r s an d R e d u c e r s , f r o m s t o c k ,together w i th a se lect ion o f S topper P lugs wi th and wi thout in tegra l sea l ing r ing .

Cable Gland Selection Table

Gland

Size

20/16

20S

20

25

25S

32

40

50S

50

63S

63

75S

75

90

Ordering

Reference

20/16T3CDS

20ST3CDS

20T3CDS

25T3CDS

25ST3CDS

32T3CDS

40T3CDS

50ST3CDS

50T3CDS

63ST3CDS

63T3CDS

75ST3CDS

75T3CDS

90T3CDS

PVC Shroud

Reference

POSPVC02

POSPVC04

POSPVC06

POSPVC09

POSPVC09

POSPVC11

POSPVC15

POSPVC18

POSPVC21

POSPVC23

POSPVC25

POSPVC28

POSPVC30

POSPVC32

Entry Threads CCable Dia A

Min.

Thread

Length D

M20

M20

M20

M25

M25

M32

M40

M50

M50

M63

M63

M75

M75

M90

15

15

15

15

15

15

15

15

15

15

15

15

15

15

3.1

6.1

6.5

11.1

11.1

17

22

29.5

35.6

40.1

47.2

52.8

59.1

66.6

8.6

11.6

13.9

19.9

19.9

26.2

32.1

38.1

44

49.9

55.9

61.9

67.9

79.3

1/2

1/2

1/2

3/4

3/4

1

1-1/4

1-1/2

2

2

2-1/2

2-1/2

3

3-1/2

Standard

Metric

Accross Corners

24.4

26.6

33.3

40.5

40.5

51

61

66.5

78.6

83.2

89

101.6

111.1

127.5

Diameter E

Max

Installed Length

74

70

74

82

82

82

85

93

98

100

100

100

110

135

Protrusion G

Max

Accross Flats

22

24

30.5

37.5

37.5

46

55

60

70.1

75

80

90

100

115

Diameter F

MaxNPT Min Max

Cable Dia B Armour Range

6

9.5

12.5

18

14

22.9

26

35

38

45.6

54.6

57

60.4

69.2

13.4

15.9

20.9

26.2

22

33.9

40.4

46.7

53.1

59.4

65.9

72.1

78.5

90.4

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1.25

1.25

1.25

1.6

1.6

2

2

2.5

2.5

2.5

2.5

2.5

2.5

2.5

0.9

0.9

0.9

1.25

1.25

1.6

1.6

2

2

2.5

2.5

2.5

2.5

2.5

Min Max Grooved Cone Plain Cone

PG11

PG13.5

PG16

PG21

PG21

PG29

PG36

PG36

PG42

PG48

-

-

-

-

PG

Optional

All Dimensions in Millimetres

A

D

C

B

A c r o s s C o r n e r s E

A cro ss F la ts F

G

Integral Entry

Thread Seal Option

* For IP67 & IP68 requirements the Cable Diameter B (minimum value) shown above should be increased by 1.0mm to ensure complete compliance.


5/6

PERT INENT TECHN ICAL CONS IDERAT IONS

DELUGE PROTECTION SEAL

D e l u ge P r o t e c t i o n b y m e a n s o f t r i e d & t e s t e d O r i n g f e at u r e

Simple and ef fec t i ve ar rangement .

I n te r na l D e l uge s eal i s no t ex po s ed t o m ec han ic a l damage o r u l t r a

v i o l e t r ad i a t i on a f t e r i ns ta ll at i on and i s com p l e te l y p r o t ec ted i n i t s

ope r a t i ona l w o r k i ng l if e , o f f e r i ng t o ta l r e l iab il it y .

There i s no need to Pul l or re-pos i t ion t he deluge seal on insta l la t ion

o r s u b se q u e n t r e - as se m b l y a f t e r i n s p e c t i o n , a s t h e C M P O R i n ga r r a n g e m e n t e n g a g e s a u t o m a t i c a l l y d u r i n g a s i m p l e i n s t a l l a t i o n

pro cedure prov id ing effec t ive protec t io n every t ime.

BODY & OUTER SEAL HOUSING

Tr ied and tes ted D isp lacement Seal ar rangemen t .

Lates t des ign l imi ts the potent ia l for over - t ightening

W i d e c a b l e a c c e p t a n c e r a n g e h a n d l e s v i r t u a l l y a ll c a b l e si z e s

k n o w n t o m an .

O ne seal range per cable gland / hub s ize.

N o h i d d e n e x t r a s. W h at y o u s e e i s w h a t y o u g e t .

INNER SEAL HOUSING

R o b u s t E x p l o s i o n p r o o f C D S s y st e m , l e ss su s c e p t i b l e t o d a m a ge

than eq uiva lent d iaphragm seals .

N o need for C able Guide to pro tec t CD S sys tem as cable conducto rs

do not penetrate or damage the Explosion proof Seal as they pass through it.

Ex p l os i on P r oo f s ea l does no t t ea r o r s p l i t as a r es u l t o f f r i c t i ona l

r o t a t i on du r i ng i ns ta ll at i on .

E x p l o s io n p r o o f i n n e r s e al r e m a i n s in t h e C a b l e G l an d , a n d d o e s

no t r i de on t he c ab l e , t he r e fo r e i s no t p r one t o mec han i c a l damage

w hen the c ab l e needs t o be w i t hd r aw n f r om the equ i pmen t . R e m o t e m a k e o f f, d i sc o n n e c t i o n a n d r e - co n n e c t i o n d o e s n o t

je o par d ise t he safet y in t eg r it y o f t he Ex ap p ar at us.

Inspect ion can be af fec ted w i thout d is turb ing the inner seal .

UNIVERSAL REVERSIBLE ARMOUR CLAMPING CONE & RING

Si m p l e m e t h o d i c al I n st a l la t i o n P r o c e d u r e w i t h o u t t h e n e e d f o r

any c on fus i ng s c i en t i f i c r ec i pe o r t o r que meas ur emen t f o r c ab l e

c lamping as the ins ta l la t ion m etho d uses a face to face insta l lat io n

ev e r y t i me .

R e ve r si b le A r m o u r C o n e , f o r M u l t ip l e C a b le A r m o u r t y p e s, h as

c l ea r l y v i s i b l e mar k i ng w h i c h mak es i nc o r r ec t as s emb l y v i r t ua l l y

imposs ib le.

R e v e r s ib l e A r m o u r C l a m p i n g R in g i s t r u l y U n i v e r s a l w i t h a b i

d i rec t ional func t ional i ty ident i ca l on both s ides

N o p o s si b il it y o f i n se r t i n g t h e R e v e r si b le A r m o u r C l a m p i n g r i n g

the w r o ng w ay i t s R igh t F i r s t T i m e . UNLIKE OUR RIVALS

Under IEC 60079 14 ( la tes t ed i t i on) C lause 9 .1 .4 s ta tes tha t "The connect ion o f cab les and

condu i t s t o t he e lec t r i ca l appara tus sha l l be made in accordance wi th t he requ i rements o f t he

re l e va n t t yp e o f p ro t e c t i o n ."

I t then goes on to say that care should be taken when select ing a sui table cable ent ry device in conjunct ion wi th certain types of cable employing

mater ials w hich can exhibi t cold f low character ist ics. Th e standard states by w ay of example that "cable ent ry d evices not em ploying com pressionsea ls wh ich act upon par t (s ) o f t he cab le hav ing co ld f l ow character i s t i cs" shou ld be employed.

T h e r e i s a r e as o n f o r t h i s , w h i c h h a s l o n g b e e n r e c o g n i se d b y m o s t r e s p e c t e d i n d u st r y e x p e r t s , b u t h a s n o t n e c e s sa r i l y b e e n w i d e l y

p u b l ish ed . T h a t i s t o say t h a t a st a n d ard co m p r e ss io n sea l, w h i ch d i ff er s f r o m a ny o f t h e C M P co n ce p t u al so l u t i o n s , f o u n d i n m o s t o t h e r t yp e s

o f a rm o u r e d ca b le g la n d s u ses o n l y o n e a ct i o n t o t i gh t e n t h e a rm o u r l o ck a n d s i m u l t an e o u s ly a p p ly t h e se a l o n t o t h e i n n e r cab l e sh e at h . T h i s

s in g u la r, u n co n t r o l l e d a c t i o n m e a n s t h a t t h e se al i s in s t al le d "b l i n d " w i t h a h i g h p ro b a b il i t y o f e xce ss p re ssu re e xe r t e d o n t h e ca b le . I r o n i ca ll y

w h i l st t h i s m etho d o f ins ta l la t i on w as used exten s ive ly in t he past , and i s s t i l l supp l ied by mo st manufacturer s t oday, on assembly t her e i s no

w ay f o r t h e i n s t al le r t o i d e n t i fy t h e p o t e n t i al p r o b l e m , a lt h o u g h i n t h e l o n g t e r m t h e c o n s eq u e n c e s m ay b e h i g h ly d a m a gi n g. I t i s o u r v i ew ,

w h i ch i s u n l ike t h o se o f o u r co m p e t i t o r s wh o w i ll co n t i n u e t o say o n e t h i n g an d d o a n o t h e r , t h a t t h e u se o f co m p re ssi o n se al s is t h e s in g le

b iggest p ro b lem in t he cab le conn ect ion bus iness tod ay.

Th e lates t s tandard a lso goes on t o s ta te t ha t "Lo w smo ke and/or f i re - res istan t cab les usual l y exh ib i t co ld f low character i s t i cs" ,and tha t "C o ld

f lo w c a n b e m o r e f u l ly d e s c r i b e d as t h e r m o p l as t i c m a t e r i a ls w h i c h f l o w w h e n s u b j ec t e d t o p r e s s u r e at a m b i e n t t e m p e r a t u r e . "

W i t h i t s r e vo l u t i o n a ry co n ce p t o f C a b le I n n e r Sh e a t h Se a li n g, t h e C M P TRITONTM CDSTM f u l l y embraces the requ i rements o f t h i s l a tes ts t an d a rd a n d a d d re sse s a n u m b e r o f o t h e r f u n d a m e n t a l co m p a t i b i li t y a n d i n st a l la t i o n i ssu e s t h a t h ave re m a in e d u n a n swe r e d b y m o s t o t h e r

cab le gland m anufacturer s .

I N N ER SEA LH O U S I N G

REVERSIBLEA RM O U R C O N E

U N IVERSA L REVERSIBLEA R M O U R C L A M PIN G R IN G

B O D Y & O U T ER

SEA L H O U SIN G

D EL U G E SEA L


6/6

Industry Bodies and Associations

C M P Pro d u c t s a re r e g i st e re d w i t h a n d a ct i ve su p p o r t e r s o f t h e f o l l o w i n g In d u s t r y b o d i e s a n d T ra d e A sso c i a t i o n s

Fir st Po in t A ssessm en t L t d A ch illes

T he En er gy In d u st r ies C o u n c il N o r t h er n O f fsh o re Fed er at io n

G l an d M an ufac tu r er s Tr ad e C o m m it t ee In ve st o r s In Pe o ple

CMP Products

Glasshouse St reetSt . Pe t e r s

N e w c a st l e u p o n Ty n e

N E6 1 B S

Tel: + 4 4 1 9 1 2 6 5 7 4 1 1

Fax: + 4 4 1 9 1 2 6 5 0 5 8 1

E-Mail: c m p @ c m p - p r o d u c t s .c o .u k

British Engines (M.E.) FZE (CMP Dubai Office)

P.O . B o x 6 1 3 6 3Jebe l A l i F ree Z one

Jebe l A l i , D uba i

U n i t e d A r a b E m i r a t e s

Tel: + 9 7 1 4 8 8 7 1 0 1 2

Fax: + 9 7 1 4 8 8 7 1 0 1 5

E-Mail: m e o f fi c e@ c m p - p r o d u c t s .c o m

CMP Products (SEA) PTE Ltd

N o 1 F if t h A v e n u e0 2 - 11 G u t h r i e H o u se

Singapore

2 6 8 8 0 2

Tel: + 6 5 6 4 6 6 6 1 8 0

Fax: + 6 5 6 4 6 6 9 8 9 1

E-Mail: seao f f i ce@ cmp -p ro duc ts . com

CMP America

1 8 1 3 R o t ar y D r i veH u m b l e

Texas 77338

U.S.A.

Tel: + 1 2 8 1 5 4 0 7 5 7 5

Fax: + 1 2 8 1 5 4 0 7 6 7 2

E-Mail: c m p @ c m p - a m e r i c a.c o m

OFFICE LOCATIONS AND STOCKING CENTRES

T3C

D

S

-TPB

-

ISSU

E

4-

05

/03

Fo r a n y o t h e r r e q u i r e m e n t n o t l i st e d w i t h i n t h e C M P s t an d a r d c a t a lo g u e r a n g e , p l e a se fe e l fr e e t o c o n v e y y o u r

requ i rem ents t o t he nearest o f f i ce de ta i led above, as C M P pr ides it se l f i n hav ing the ab i l i t y and f l ex ib i l i t y t o p r ov ide

so l u t i o n s t h at m e e t t h e ve r y n e e d s o f i n d u st r y. W h e t h e r yo u r a p p l i ca t i o n i s f o r G e n e ra l Pu rp o se In d u s t r i a l, O rd i n a r y

L o ca t i o n s , M a r i n e an d W e t L o ca t i o n s , o r H a za rd o u s L o ca t i o n s , C M P d e l ive r s t h e so l u t i o n a t t h e r i gh t p l a ce , t h e r i g h tt i m e a n d t h e r i gh t p r i ce .

cmp triton deluge proof cable glands

Documents