cnc gear & machining - asset salescarriage, 22.63” z-axis travel, 12 station turret, 20hp,...
TRANSCRIPT
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
Asset Sales, Inc.
CNC GEAR & MACHINING GEAR EQUIPMENT
4500 LEEDS AVENUE, SUITE 112 – CHARLESTON, SC 29405
TUESDAY, JANUARY 14TH @ 10:30 A.M. EST
MFG
DATE OR
SPEC
MFG
DATE OR
SPEC
European Headquarters
P.O. Box 819, Halifax HX1 9QQ UK
Tel / Fax 07836.347880
2006 2006
2007
2005
<
MORI SEIKI SL35B/750
CNC TURNING CENTER
PFAUTER PE250 CNC GEAR HOBBER
>
KITCHEN EQUIPMENT
2008 2001
2007
2006
SURPLUS EQUIPMENT
Inspection: MONDAY, JANUARY 13TH FROM 8:00 A.M. – 4:00 P.M. EST
FANUC
CONTROL
EXCELLENT EXCELLENT
GEAR GRINDERS REISHAUER Model RZ362A CNC Gear Grinder with Dresser, 360mm Max. Wheel Diameter, 175mm Slide Stroke, 600
Max. Number of Teeth, 6 Min. Number of Teeth, 280-350mm Grinding Wheel Diameter, Robot Automatic Load &
Unload, Degreaser, REISHAUER CNC Control, ElBaron Electrostatic Mist Collector, Full Enclosures, Siemens Pendant
Control for Loader, Oberlin Model OPF-04 Filtration System with PLC & Koolant Kooler, sn:73724, mfg.1995/2002
(2) REISHAUER Model RZ362A CNC Gear Grinders with Dressers, REISHAUER CNC Controls, Full Enclosures,
sn:73907, mfg.1998 & sn:73717, mfg.1994
OBERLIN Model OPF7 Coolant Filtration System with Paper, UNIOP PLC Controls & Schreiber 1000MC-W Chiller,
sn:245MD, sn:51703
GEAR HOBBER PFAUTER Model PE250 CNC Gear Hobber with 11.81” Maximum Work Diameter, 6” Hob Diameter (Max.), 40”
Maximum Hob Slide Travel, 40” Maximum Distance Work Spindle Face to Tail Center, Mag. Separator, Fanuc 15M
CNC Control, Part Conveyor, sn:27466, mfg.1990
GEAR SHAVERS, BROCHES (2) RED RING Model GCU Gear Shavers with Crowning, sn:GCV-3, GS1296
(3) HURTH Model ZSA220 Gear Shavers with Crowning, sn: 23192, 40037, 23176
(3) LOCHER Model RWL3/1000 Horizontal Broaching Machines
SHOT BLASTERS WHEELABRATOR Shot Blaster with (4) 16” Diameter Horizontal Stations & Reclaim
PANGBORN Shot Blast with (4) 24” Diameter Horizontal Stations & Reclaim, 20 HP
GEAR NOISE TESTER LINNENBRINK LTW Composite Single Flank Gear Noise Tester Crankshaft 3949358, Camshaft 3949356 with Full
Enclosure, (3) Testing Stations with (3) Different Gears, Automatic Loader and Unloader, Siemens Simatic OP17
Control, mfg.2006
CNC LATHES MORI SEIKI Model SL35B/750 CNC Turning Center with 12” 3-Jaw, 3.5” Spindle Bore, 23.6” Swing Over Bed, 16.7”
Over Cross Slide, 30.7” Maximum Machining Length, 30HP, 12 Position Turret, Tailstock, Fanuc 10T CNC Control &
Tool Presetter, sn:370
TOYOTA Model GT52 CNC Turning Center with 12” 3-Jaw Chuck, 3” Spindle Bore, 19” Maximum Part Diameter, 12.6”
Over Cross Slide, 58” Between Centers, 39.5” Maximum Length Machined, 12 Position Turret, Tailstock, Fanuc 15T
CNC Control, Auto Door
HARDINGE Model T51 Conquest CNC Turning Center , Chucker with 12” 3-Jaw Chuck, 26” Swing, 19.5” Over
Carriage, 22.63” Z-Axis Travel, 12 Station Turret, 20HP, Chip Conveyor & Fanuc 18T CNC Control, sn:CL-383-BBB
OVEN GRIEVE Model TBH500 5000˚ Maximum Temperature Electric Oven with 48” W x 48” x 48” Inside Controls, Double
Doors
MISCELLANEOUS LANTECH Model 0-600 Shrink Wrap Machine, sn:24193
Aercolopy Dust Collector
Factory Tech Model 390 Electric Floor Scrubber, sn:390-707
1 of 4
1 of 2
>
(2) RED RING GCU
GEAR SHAVERS
REISHAUER RZ362A CNC GEAR GRINDER
12”
CHUCK CROWNING
1 of 3
2
MACHINERY INSPECTION DATE & TIMES – MONDAY, JANUARY 13TH FROM 8:00 A.M. – 4:00 P.M. EST
EXCELLENT
Want to Sell Your Shop or Know Someone
Who Does? Call Us Toll Free at
(888) 800-4442! We Pay Great Finder’s Fees!
Can’t Attend the Sale, but Still Want to Bid?
Visit www.asset-sales.com
for More Bidding Options!
OBERLIN OPF7 COOLANT FILTRATION SYSTEM
>
NAKAMURA TOME
MODEL WT-250
TWIN SPINDLE
TWIN TURRET
CNC LATHE
1 of 2
2005
2008
WWW.ASSET-SALES.COM
ATTENDING THE AUCTION IN PERSON?
What you need to Bring…
•Your Drivers License
•Business Card
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be
Paying via Company Check.
2008
50
TAPER
50
TAPER
PFAUTER PE250 CNC GEAR HOBBER
>
MORI SEIKI
MODEL AL-2
CNC LATHE
REISHAUER RZ362A CNC GEAR GRINDER
REISHAUER RZ362A CNC GEAR GRINDER WITH LOAD & OFFLOAD
>
LNS QUICKLOAD
MAGAZINE
BARFEED
2003
2003
REISHAUER RZ362A CNC GEAR GRINDER
GEAR GRINDERS REISHAUER Model RZ362A CNC Gear Grinder with Dresser, 360mm Max. Wheel
Diameter, 175mm Slide Stroke, 600 Max. Number of Teeth, 6 Min. Number of Teeth,
280-350mm Grinding Wheel Diameter, Robot Automatic Load & Unload, Degreaser,
REISHAUER CNC Control, ElBaron Electrostatic Mist Collector, Full Enclosures,
Siemens Pendant Control for Loader, Oberlin Model OPF-04 Filtration System with
PLC & Koolant Kooler, sn:73724, mfg.1995/2002
(2) REISHAUER Model RZ362A CNC Gear Grinders with Dressers, 360mm Max.
Wheel Diameter, 175mm Slide Stroke, 600 Max. Number of Teeth, 6 Min. Number of
Teeth, 280-350mm Grinding Wheel Diameter REISHAUER CNC Controls, Full
Enclosures, sn:73907, mfg.1998 & sn:73717
OBERLIN Model OPF7 Coolant Filtration System with Paper, UNIOP PLC Controls &
Schreiber 1000MC-W Chiller, sn:245MD, sn:51703
GEAR HOBBER PFAUTER Model PE250 CNC Gear Hobber with 11.81” Maximum Work Diameter, 6”
Hob Diameter (Max.), 40” Maximum Hob Slide Travel, 40” Maximum Distance Work
Spindle Face to Tail Center, Mag. Separator, Fanuc 15M CNC Control, Part Conveyor,
sn:27466
FANUC
CONTROL
3
AVAILABLE
AUCTION SALE DATE & TIME – TUESDAY, JANUARY 14TH @ 10:30 A.M. EST
MORI SEIKI SL35B/750 CNC TURNING CENTER TOYODA GT52 CNC TURNING CENTER
LINNENBRINK LTW COMPOSITE GEAR NOISE TESTER
Can’t Attend the Sale? Register on Bidspotter.com to Bid Live Online in this Auction!!
(888) 800-4442
3
2000 2007
>
OKK
MODEL HM-60
4 AXIS CNC
HORIZONTAL
MACHINING
CENTER
WWW.ASSET-SALES.COM
3
AVAILABLE
OVER
1000
LOTS
HARDINGE T51 CONQUEST CNC TURNING CENTER
Can’t Attend the Sale, but Still Want to Bid?
Visit www.asset-sales.com for More Bidding Options!
HURTH ZSA220 GEAR SHAVERS
RED RING GCU GEAR SHAVERS
1 OF 3 LOCHER RWL3/1000 HORIZONTAL BROACHING
MACHINES
2004
2000
1 of 3
1 of 2
GEAR SHAVERS, BROCHES (2) RED RING Model GCU Gear Shavers with Crowning,
sn:GCV-3, GS1296
(3) HURTH Model ZSA220 Gear Shavers with Crowning, sn:
23192, 40037, 23176
(3) LOCHER Model RWL3/1000 Horizontal Broaching
Machines
SHOT BLASTERS WHEELABRATOR Shot Blaster with (4) 16” Diameter
Horizontal Stations & Reclaim
PANGBORN Shot Blast with (4) 24” Diameter Horizontal
Stations & Reclaim, 20 HP
GEAR NOISE TESTER LINNENBRINK LTW Composite Single Flank Gear Noise
Tester Crankshaft 3949358, Camshaft 3949356 with Full
Enclosure, (3) Testing Stations with (3) Different Gears,
Automatic Loader and Unloader, Siemens Simatic OP17
Control, mfg.2006
CNC LATHES MORI SEIKI Model SL35B/750 CNC Turning Center with 12”
3-Jaw, 3.5” Spindle Bore, 23.6” Swing Over Bed, 16.7” Over
Cross Slide, 30.7” Maximum Machining Length, 30HP, 12
Position Turret, Tailstock, Fanuc 10T CNC Control & Tool
Presetter, sn:370
TOYODA Model GT52 CNC Turning Center with 12” 3-Jaw
Chuck, 3” Spindle Bore, 19” Maximum Part Diameter, 12.6”
Over Cross Slide, 58” Between Centers, 39.5” Maximum
Length Machined, 12 Position Turret, Tailstock, Fanuc 15T
CNC Control, Auto Door
HARDINGE Model T51 Conquest CNC Turning Center ,
Chucker with 12” 3-Jaw Chuck, 26” Swing, 19.5” Over
Carriage, 22.63” Z-Axis Travel, 12 Station Turret, 20HP, Chip
Conveyor & Fanuc 18T CNC Control, sn:CL-383-BBB
OVEN GRIEVE Model TBH500 5000˚ Maximum Temperature Electric
Oven with 48” W x 48” x 48” Inside Controls, Double Doors
MISCELLANEOUS LANTECH Model 0-600 Shrink Wrap Machine, sn:24193 ●
Aercolopy Dust Collector ● Factory Tech Model 390 Electric
Floor Scrubber, sn:390-707
GRIEVE TBH500 ELECTRIC OVEN
FACTORY TECH 390 ELECTRIC
FLOOR SCRUBBER
PANGBORN SHOT BLAST
AEROLOPY
DUST
COLLECTOR
1 of 3
2006
12”
CHUCK
PANGBORN SHOT BLAST
2
AVAILABLE
HOTEL
Street Address
City, State Zip Code
Telephone Number
“LYNYRD SKYNYRD”
MILWAUKEE IRON STREET SURVIVOR
DIRECTIONS – FROM TRI-CITIES MUNICIPAL AIRPORT
Exit Airport toward I-182 E. Turn right to merge onto I-182 E/US 12 E toward Walla Walla. Continue onto US 12E for approximately 4 miles. Turn right onto Sacajawea Park Road. Take the 2nd right onto E. Ainsworth Street. Plant will be on the right. Follow the auction signs.
HOTELS
Corporate Headquarters 301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079 Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com Asset Sales, Inc. – South Carolina License # 003427F
Lance Mannion – South Carolina License # 3113R
Asset Sales, Inc.
PUBLIC AUCTION SURPLUS EQUIPMENT
CNC GEAR & MACHINING GEAR EQUIPMENT FACILITY
CHARLESTON, SC
TUESDAY, JANUARY 14TH @ 10:30 A.M. EST
HOLIDAY INN CHARLESTON
AIRPORT & CONV. CENTER
5264 International Blvd.
North Charleston, SC 29418
(843) 576-0300
3 AVAILABL
E
?
Want to join our mailing list? Want to be included
in Email Blasts announcing future auctions? Want
to update your address? Curious to preview
machines and tooling featured in an upcoming
auction? Want to request a brochure? Or want to
be removed from our mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
(704) 821-4325
DIRECTIONS
FROM CHARLESTON INTERNAITONAL AIRPORT:
Follow International Blvd to exit Airport onto I-526 W. Take
exit 14 from I-526W for @ 3.3 miles. Turn right onto Leeds
Ave. Turn left to stay on Leeds Ave. Turn right and plant
will be on the right. Plant is approximately 4.2 miles from
the airport. Follow auction signs.
HOTELS
HILTON GARDEN INN
CHARLESTON AIRPORT
5265 international Blvd.
North Charleston, SC 29418
(843) 308-9330
FOR IMMEDIATE SALE PRIVATE LIQUIDATION - UNDER POWER
• SCHIESS RF-35/40 170” Vertical Gear Hobber
• SCHIESS RF30E 128” Vertical Gear Hobber
• PFAUTER P3000B 120” Vertical Gear Hobber
• PFAUTER P1251 50” Vertical Gear Hobber
Call Auctioneer for More Information
(888) 800-4442 / (704) 821-4315 or
ABBREVIATED TERMS & CONDITIONS OF AUCTION YOUR PARTICIPATION AND BIDDING ARE
CONSIDERED A LEGALLY BINDING CONTRACT – IT
IS PROHIBITED TO BID ON ANY ITEM THAT YOU
CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE
OR REMOVE BY DESIGNATED DATE. Subject to
amendments and modifications announced by the auctioneer at the
time of the auction, any person participating in the auction shall be
bound by the following terms and conditions. The auctioneer does not
warrant the accuracy, authenticity, description, weight, count or
measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid
process in accordance to the AUCTIONEER’S TERMS &
CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-
SALES.COM. No article shall be removed unless paid in full and all
articles purchased shall be removed in the time allocated by the
auctioneer. No item, no matter how small or how far the purchaser
has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer
and/or a company check accompanied by a bank letter of guarantee
payable to Asset Sales, Inc. All bidding and invoicing will be in US
Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/ Removal of sold equipment is the sole responsibility of the
buyer and must be completed by the posted date. Rigging/Removal
may not begin until payment has been made in full and the auction
sale is complete. All heavy rigging will require a certificate of
insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,”
“WITH ALL FAULTS” BASIS.
A 13% Buyer’s Premium will apply to all onsite purchases
and a 16% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be pre-approved by
Asset Sales, Inc. The pre-approval process is easy, but necessary.
Asset Sales, Inc. will verify telephone number and confirm agreement
to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED
STATES WILL BE REQUIRED TO WIRE TRANSFER A
MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR
ALL NON-ONSITE BIDDING.
OBERLIN OPF7 COOLANT FILTRATION SYSTEM
FOR REISHAUER GRINDER
UPCOMING AUCTIONS TUESDAY, JANUARY 21st – Swiss Specialties
Swiss CNC & Machining
Onsite & Online
Bohemia, NY