C N C O P E R A T O R 2

Summary: Perform Tasks assigned to Machine Shop by the CNC Programmer or Management. Set up and operate various CNC Mills/Lathes. Work with Blue prints, sketches, planning sheets, verbal instructions and/or engineering, tooling, or equipment information. Works independently with minimum guidance in a team environment. Able to direct multiple CNC Operator 1 level employees during a specific Shift. Report directly with management team on all efficiency issues or increases.

Essential duties and responsibilities:- Manage and supervise multiple CNC Operator 1 level employees to maximum efficiency levels

- Program and adjust CNC machines at the machine to incorporate all applicable changes as needed.

- Help with design and programming of any new parts, fixtures, jigs, tooling as needed.

- Load and run parts into CNC Mill/Lathe Machines

- Detail and finish Parts per Blueprint

- Maintain production efficiency levels

- Keep machine tools in clean and working order

- Fill out Inspection first article and in process reports

- Complete Job traveler fully and accurately

- Manually QC check all parts before turning into QC Department and notify management if anything is out of spec.

- Turn in First article and be approved before running any new parts.

Education and/or Experience:High School diploma required; College or Technical degree not mandatory but is a definite plus. Minimum of three years CNC experience with a Technical School degree. Experience using CAD/CAM software is needed.

Competitive compensation package based on capabilities and experience.

Due to the nature of our business, any felonies automatically disqualifies and prohibits candidates from employment with Montana Rifle Company.