cnc vertical machining centers katalog.pdf · 2018. 3. 1. · heavy cutting vertical machining...

10
CNC VERTICAL Machining Centers CNC VERTICAL Machining Centers NO.98 LANE 22, SEC 1, HSIN JEN RD., TAIPING DIST., TAICHUNG CITY, TAIWAN. FINETECH MACHINE TOOL CO ., LTD. TEL: 886-4-2278 3514 FAX: 886-4-2278 3781 Quality Assurance Before leaving the plant, all Finetech CNC machine is subjected to more than 100 quality-assurance tests. These tests provide a certified paper trail of quality for every component through out the entire assembly process. After assembly all Finetech CNC Machines are tested for 24 hours of actual running time to assure quality is built into every machine we make. Our assurance of quality follows every machine from the shipping from our plant, to the arrival and installation at yours. 12.2013 / 1000 05-035E/S 04-2322 7907 http://www.finetech.com.tw E-mail: [email protected] [email protected] FINETECH MACHINE TOOL CO., LTD. FANUC FANUC SINAMICS SINAMICS HEIDENHAIN HEIDENHAIN ARMLESS TYPE MAGAZINE ARM TYPE MAGAZINE

Upload: others

Post on 09-Feb-2021

6 views

Category:

Documents


0 download

TRANSCRIPT

  • CNC VERTICAL Machining CentersCNC VERTICAL Machining Centers

    NO.98 LANE 22, SEC 1, HSIN JEN RD., TAIPING DIST., TAICHUNG CITY, TAIWAN.

    FINETECH MACHINE TOOL CO ., LTD.

    TEL: 886-4-2278 3514

    FAX: 886-4-2278 3781

    Quality AssuranceBefore leaving the plant, all Finetech CNC machine is subjected to more than 100 quality-assurance

    tests. These tests provide a certified paper trail of quality for every component through out the entire

    assembly process. After assembly all Finetech CNC Machines are tested for 24 hours of actual

    running time to assure quality is built into every machine we make. Our assurance of quality follows

    every machine from the shipping from our plant, to the arrival and installation at yours.

    12.2

    013

    / 100

    0

    05-

    035E

    /S

    04-

    2322

    790

    7

    http://www.finetech.com.tw

    E-mail: [email protected] [email protected] FINETECH MACHINE TOOL CO., LTD.

    FANUCFANUCSINAMICSSINAMICS HEIDENHAINHEIDENHAIN

    ARMLESS TYPE MAGAZINE

    ARM TYPE MAGAZINE

  • Complex Type Vertical Machining Center (2LB WAY)

    FINETECH - 01

    CN

    C V

    ert

    ica

    l M

    ac

    hin

    ing

    Ce

    nte

    rs

    CNC Vertical Machining Center (LINEAR WAY)

    Extra Wide Linear Way !

    Heavy Cutting Vertical Machining Center (BOX WAY)!Rigid Construction!

    Excellent Heavy Cutting Capability!

    A combination of heavy and high speed cutting.

    Extra Valuable And High Efficiency!

    CNC Vertical Machining Center (with Geared Head)

    A new level of heavy cutting !

    FINETECH - 01 FINETECH - 02

    ▲ 560-H3L

    ▲ 650-3B

    ▲ 1055-3B▲ 1060-2LB/3B

    ▲ 850-2LB ▲ 1060-2LB ▲ 1270-2LB ▲ 1485-2LB▲ 1685-2LB ▲ 1570-2LB ▲ 1670-2LB

    ▲ 2590-3B

    ▲ 1890-2LB

    ▲ 2090-2LB/3B▲ 2290-2LB/3B

    ▲ 1370-H3L

    ▲ 610-H3L

    ▲ 850-3B

    ▲ 1270-2LB/ 3B ▲ 1370-3B ▲ 1485-2LB/ 3B▲ 1685-2LB/ 3B

    ▲ 1570-2LB/ 3B▲ 1670-2LB/ 3B

    ▲ 1690-3B▲ 1890-2LB/ 3B

    ▲ 1670-3B

    ▲ 710-H3L

    ▲ 1055-3B

    ▲ 1685-3B▲ 1690-3B

    ▲ 1570-H3L

    ▲ 850-H3L

    ▲ 1060-3B

    ▲ 1890-3B

    ▲ 1270-3B

    ▲ 2090-3B

    ▲ 1670-H3L

    ▲ 1060-H3L

    ▲ 1485-3B

    ▲ 1485-H3L

    ▲ 2090-2LB▲ 2290-2LB

    ▲ 1570-3B

    ▲ 1270-H3L

    ▲ 2290-3B▲ 2590-3B

    ▲ 1685-H3L

  • FINETECH - 03 FINETECH - 04

    From its beginnings in 1979, Finetech has been one of the top machine tool manufactures in the world. Finetech manufactures a wide range of CNC vertical machining centers. Finetech’s machines are built to deliver high speed with more accuracy, efficiency and durability with more standard features, high-tech innovations and solid engineering. Every Finetech machine is designed to provide more flexibility and productivity, making it the soundest investment you will ever consider.

    Extensive Quality ControlEach machining center from FINETECH is subjected to rigorous quality inspections during assembly and before shipment. If it does not measure up to our standards, it does not leave our factory. Our objective is to ensure that each machine will provide the optimum performance and fully satisfy customers.

    CNC Vertical Machining Center

    Test

    INTERNATIONALLY RECOGNIZED MACHINE TOOLS FROM FINETECH

    SPINDLE DYNAMICBALANCE TESTINGSPINDLE DYNAMICBALANCE TESTING

    SPINDLE THERMALEXTENSION TESTING

    SPINDLE THERMALEXTENSION TESTING

    DYNAMIC BALL BAR TESTINGDYNAMIC BALL BAR TESTINGLASER INSPECTIONLASER INSPECTION

    ON-PROCESS INSPECTIONON-PROCESS INSPECTION

    ON-PROCESS INSPECTIONON-PROCESS INSPECTIONINSPECTING STRAIGHTNESS

    OF LINEAR GUIDE WAYINSPECTING STRAIGHTNESS

    OF LINEAR GUIDE WAY

    INSPECTING PARALLELISM OFBALL SCREW STRAIGHTNESS

    INSPECTING PARALLELISM OFBALL SCREW STRAIGHTNESS

    Quality

    NASA TEST FOR MACHINE AND CONTROL ACCURACY

  • FINETECH - 05 FINETECH - 06

    CNC Vertical Machining CenterCNC Vertical Machining Center

    SMV-1670-H3LSMV-1670-H3L

    1502 mm

    1722 mm

    High Speed Machining Center

    Extra Wide Linear Way !

    • X, Y, Z Linear way.

    • Two linear ways with six blocks on X-axis. (1270 model or above)

    • Coolant through spindle (optional)

    • Choice of CAT/BT/DIN 40, HSK 63 spindle.

    Standard • 8000rpm, belt-drive/40

    Optional • 10000/12000rpm, belt-drive/40

    • 10000/12000/15000rpm, direct-drive/40

    • 20000rpm(built-in type)/40 / HSK-63

    • Four linear ways on Y-axis.

    • Two linear ways with six blocks on X-axis.

    (ROLLER LINEAR WAY)

    • SIX BEARING BLOCKS

  • FINETECH - 07 FINETECH - 08

    Heavy Cutting Vertical Machining Center Heavy Cutting Vertical Machining Center

    SMV-1670-3B

    • Box ways on three axes.

    • 4 Box way on Y-axis.

    • Germany ZF gearbox (optional)

    • Built-in heavy duty gear box (optional)

    • Coolant through spindle (optional)

    • Choice of CAT/BT/DIN 40, HSK 63 spindle.

    Standard • 8000rpm, belt-drive/40 • 6000rpm, belt-drive/50

    Optional • 8000rpm, belt-drive/50 • 10000rpm, direct-drive/50 • 10000/12000/15000rpm, 40 / HSK 63 • 20000rpm(built-in type)/40 / HSK 40

    SMV-1670-3B

    1582 mm

    1722 mm

    Heavy Cutting Machining Center

    Rigid Construction!Outstanding Heavy Cutting Capability!

    (BOX WAY)

  • FINETECH - 09 FINETECH - 10

    Complex Type Vertical Machining CenterComplex Type Vertical Machining CenterHeavy Cutting High SpeedVertical Machining Center

    A combination of heavy and high speed cutting.(2LB WAY)LINEAR WAYS + BOX WAYS.

    • Linear ways on X, Y-axis.

    • Box ways on Z-axis.

    • Germany ZF gearbox (optional)

    • Coolant through spindle (optional)

    • 40/50 Taper (CAT/BT/DIN), HSK 63/100

    Standard • 8000rpm, belt-drive/40 • 6000rpm, belt-drive/50

    Optional • 8000rpm, belt-drive/50 • 10000rpm, direct-drive/50 • 10000/12000/15000rpm,40 / HSK 63 • 20000rpm(built-in type)/40 / HSK 63

    SMV-1270-2LB

    1030 mm

    1210 mm

    SMV-1270-2LB

  • FINETECH - 11 FINETECH - 12

    CNC Vertical Machining CenterCNC Vertical Machining Center

    • Box ways on three axes.

    • Four box ways on base assure outstanding stability when performing heavy cutting. (1270 model or above)

    • Germany ZF gearbox (optional)

    • Built-in heavy duty gear box (optional)

    • Coolant through spindle (optional)

    • Choice of CAT/BT/DIN 40 or 50 spindle.

    Standard • 6000rpm/40/50

    Optional • 8000rpm/40/50

    SMV-1670-3B

    (GEAR-DRIVE SPINDLE HEAD)

    1582 mm

    1722 mmSMV-1670-3B

    High Speed Vertical Machining Center

    A New Level of Heavy Cutting !

    • Spindle head is driven by a gearbox.

    • High rigidity. Rigid Construction.

    Germany ZF gearbox (optional)

    Built-in heavy duty gear box (optional)

  • NC-4NC-4NC-4

    NTNTNT

    Optional AccessoriesOptional AccessoriesOptional Accessories

    FINETECH - 13 FINETECH - 14

    TS27RTS27RTS27R TT140TT140TT140Z3DZ3DZ3D

    TC50TC50TC50OMP40/60OMP40/60OMP40/60 TS640TS640TS640

    (20 BAR) (60 BAR)

    RENISHAW Tool Measuring System

    RENISHAW Workpiece Measuring System

    HEIDENHAIN Tool Measuring System

    BLUM Workpiece Measuring System

    HEIDENHAIN Workpiece Measuring System

    Built-in Coolant Nozzles

    CTS-Coolant Through Spindle

    TransformerOptical Linear Scale Spindle Oil Cooler

    BLUM Tool Measuring System

    4th Axis Rotary Table 4/5th Axis Rotary Table 4/5th Axis Rotary Table

    BLUM Laser Tool Measuring System

    RENISHAW Laser Tool Measuring System

    □ Workpiece Measurement System□ RENISHAW OMP 40/60□ BLUM TC50□ HEIDENHAIN TS640

    □ Tool Measuring System□ RENISHAW TS27R□ BLUM Z3D□ HEIDENHAIN TT140

    □ Laser Tool Measuring System

    □ RENISHAW NC-4 □ BLUM NT

    □ Coolant Through Spindle□ 20 BAR □ 50 BAR □ 60 BAR

    □ Optical Linear Scale

    □ Oil/Fluid Separation Device

    □ Built-in Coolant Nozzles

    □ Spindle Oil Cooler System

    □ 4th Axis Rotary Table

    □ 4/5th Axis Rotary Table

    □ HEIDENHAIN Optical Encoder

    □ Germany ZF Gearbox

    □ Built-in Heavy Duty Gear Box

    □ Transformer

    □ Link Chain Type Chip Conveyor

    □ Screw Type Chip Conveyor

    □ Flushing System + Water Gun

    Link Chain TypeChip Conveyor

    Screw TypeChip ConveyorOil/Fluid Separation Device

    Germany ZF GearboxHEIDENHAINOptical Encoder

    Built-in Heavy Duty Gear Box

  • FINETECH - 15 FINETECH - 16

    ROLLER LINEAR WAY

    SMV Series Specifications:

    COMPLEX TYPEMODEL 450 -H3L

    560-H3L

    610-H3L

    710-H3L

    850-H3L

    1060-H3L

    1270-H3L

    1370-H3L

    1485-H3L

    1570-H3L

    1670-H3L

    1685-H3L

    850-2LB

    1060-2LB

    1270-2LB

    1485-2LB

    1570-2LB

    1670-2LB

    1685-2LB

    1890-2LB

    2090-2LB

    2290-2LB

    TRAVEL (Unit : mm)

    X-axis 450 560 610 710 850 1000 1200 1300 1400 1500 1600 1600 850 1000 1200 1400 1500 1600 1600 1800 2000 2200

    Y-axis 350 350 400 450 600 600 700 700 850 700 700 850 600 600 700 850 700 700 850 1000 900 (1000) 900 (1000)

    Z-axis 380 380 450 460 560 (650) 560 (650) 650 650 850 650 650 850 560 (650)(BT-50: 630)560 (650)

    (BT-50: 630) 650 850 650 650 850 900 900 900

    Spindel center to column 380 380 390 514 598 598 730 730 900 730 730 900 598 598 705 900 730 730 900 1055 1055 1055

    Spindle nose to table surface 120~500 120~500 130~580 150~600 150~700 150~700 150~800 150~800 130~980 150~800 150~800 130~980 150~700 150~700 150~800 130~980 150~800 150~800 130~980 250~1150 250~1150 250~1150

    TABLE

    Table (L x W) (mm) 600 x 320 600 x 350 650 x 400 760 x 420 1000 x 500 1100 x 500 1350 x 600 1450 x 700 1500 x 800 1650 x 700 1750 x 700 1600 x 800 1100 x 500 1100 x 500 1300 x 600 1500 x 800 1650 x 700 1750 x 700 1600 x 800 1950 x 900 2150 x 900 2350 x 1000

    T-slot (No. x Width) (mm) 3 x 14 x 100 3 x 14 x 100 3 x 18 x 100 3 x 18 x 100 5 x 18 x 100 5 x 18 x 100 5 x 18 x 100 5 x 18 x 100 7 x 18 x 100 5 x 18 x 100 5 x 18 x 100 7 x 18 x 100 5 x 18 x 100 5 x 18 x 100 5 x 18 x 125 7 x 18 x 100 5 x 18 x 115 5 x 18 x 115 7 x 18 x 100 5 x 22 x 160 5 x 22 x 150 5 x 22 x 160

    Max. table load (kgs) 300 300 400 500 700 800 900 1000 1200 1200 1200 1000 500 700 700 1200 1200 1200 1000 2000 2000 2000

    MAX. TRAVERSE SPEED

    X / Y / Z-axis (M/min) 36 / 36 / 32 36 / 36 / 30 36 / 36 / 32 36 / 36 / 32 36 / 36 / 32 36 / 36 / 32 30 / 30 / 25 25 / 25 / 25 25 / 25 / 20 25 / 25 / 25 25 / 25 / 25 20 / 20 / 15 30 / 30 / 25 30 / 30 / 25 30 / 30 / 25 25 / 25 / 20 25 / 25 / 20 25 / 25 / 20 20 / 20 / 15 20 / 20 / 15 15 / 15 / 15 15 / 15 / 12

    ATC (tools)

    Carousel type (Opt.) 16 16 16 / 20 16 / 20 20 / 24 20 / 24 20 / 24 20 / 24 N / A 20 / 24 20 / 24 N / A 20 / 24 20 / 24 20 / 24 N / A 20 / 24 20 / 24 N / A N / A N / A N / A

    Swing Arm type (Opt.) 20 20 20 / 24 20 / 24 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30

    Chain type (Opt.) N / A N / A N / A N / A N / A 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 N / A 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40

    SPINDLE

    Type-CAT/BT/DIN (Opt. HSK) 40 40 40 40 40 40 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50

    Motor (cont 30min) (kW) 5.5~7.5 5.5~7.5 5.5~7.5 5.5~7.5(7.5-~11)7.5~11(11~15)

    7.5~11(11~15)

    7.5~11(11~15)

    11~15 (15~18.5)

    15~18.5(18.5~22)

    11~15(15~18.5)

    11~15 (15~18.5)

    15~18.5(18.5~22) 7.5~11 kW (11~15 kW) 15~18.5 kW (18.5~22 kW)

    Belt-drive BT-40 8000 rpm (10000 / 12000 rpm) 8000 rpm (10000 / 12000 rpm)

    Direct-drive BT-40 (Opt.) 10000 / 12000 / 150000 rpm 10000 / 12000 /150000 rpm

    Build-in spindle (Opt.) 20000 / 30000 rpm (BT-40/ HSK-E40/50/63) 20000 rpm (BT-40/ HSK-E40/50/63)

    Belt-drive BT-50 (Opt.) N / A 6000 / 8000 rpm 6000 / 8000 rpm

    Direct-drive BT-50 (Opt.) N / A 8000 / 10000 rpm 8000 / 10000 rpm

    MISCELLANEOUS

    Power consumption (KVA) 25 25 30 30 35 35 35 45 55 45 45 55 35 35 35 55 45 45 55 55 55 55

    Pneumatic supplier (kg/cm2) 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5

    Coolant tank capacity (liter) 230 256 256 256 350 367 501 510 560 560 560 580 350 367 501 560 501 501 580 650 650 650

    Machine weight (kg) 3500 4000 4500 4800 6500 6800 7800 9000 14000 11000 12000 15000 6500 6800 7800 14000 11000 12000 15000 20000 23000 27000

    Floor space (LxW) (mm) 2100 x 1800 2100 x 1800 2180 x 1852 2180 x 2040 2620 x 2090 2900 x 2090 3398 x 2221 3650 x 2220 4600 x 3200 4150 x 2221 4400 x 2221 4800 x 3200 2620 x 2090 2900 x 2090 3398 x 2221 4600 x 3200 4400 x 2250 4520 x 2250 4800 x 3200 4900 x 3312 5420 x 3475 5700 x 3500

    Floor space requirement (with conveyor) (LxW) (mm) 3100 x 1800 3100 x 1800 3283 x 1852 3282 x 2040 3650 x 2090 3735 x 2090 4500 x 2221 4620 x 2220 5800x 3200 5131 x 2221 5400 x 2221 6000 x 3200 3650 x 2090 3735 x 2090 4500 x 2221 5800x 3200 4400 x 2250 5680 x 2250 6000 x 3200 6059 x 3312 6578 x 3475 6900 x 3500

    Packaging size (LxWxH)(cm) 230x220x247 227x220x247 246x229x256 246x229x256 246x229x256 318x231x256 350x231x256 380x231x256 510x350x360 420x232x256 460x232x256 540x350x510 282x231x256 310x231x256 350x231x256 510x350x360 460x231x256 480x232x256 540x350x510 520x370x370 570x370x380 590x370x380

    • Specifications and design characteristics are subject to change without prior notice.• The data shown in parenthesis are optional.

  • FINETECH - 17 FINETECH - 18

    BOX WAYMODEL 650-3B

    850-3B

    1055-3B

    1060-3B

    1270-3B

    1485-3B

    1570-3B

    1670-3B

    1685-3B

    1690-3B

    1890-3B

    2090-3B

    2290-3B

    2590-3B

    TRAVEL (Unit : mm)

    X-axis 650 850 1000 1000 1200 1400 1500 1600 1600 1600 1800 2000 2200 2500

    Y-axis 500 600 550 600 700 850 700 700 850 900 900 (1000) 900 (1000) 900 (1000) 1000

    Z-axis 500 560 (650)(BT-50: 630) 550560 (650)

    (BT-50: 630) 650 850 650 650 850 900 (1000) 900 900 900 900 (1000)

    Spindel center to column 530 598 598 598 705 900 730 730 900 1055 1055 1055 1055 1055

    Spindle nose to table surface 125~620 150~700 150~700 150~700mm 150~800 130~980 150~800 150~800 130~80 250~1050 250~1150 250~1150 250~1150 250~1150

    TABLE

    Table (L x W) (mm) 800 x 470 1080 x 500 1100 x 550 1100 x 500(BT-50: 1100 x 600) 1300 x 700 1500 x 800 1650 x 700 1750 x 700 1600 x 800 1800 x 840 1950 x 900 2150 x 900 2350 x 1000 2450 x 900

    T-slot (No. x Width) (mm) 5 x 14 x 100 5 x18 x 100 5 x18 x 95 5 x 18 x 100 5 x 18 x 125 7 x 18 x 100 5 x 18 x 115 5 x 18 x 115 7 x 18 x 100 5 x 22 x 150 5 x 22 x 160 5 x 22 x 150 5 x 22 x 160 5 x 22 x 160

    Max. table load (kgs) 500 700 700 700 1000 1300 1400 1500 1500 1500 2000 2000 2000 2500

    MAX. TRAVERSE SPEED

    X / Y / Z-axis (M/min) 25 / 25 / 25 25 / 25 / 25 25 / 25 / 25 25 / 25 / 25 25 / 25 / 20 20 / 20 / 15 20 / 20 / 15 20 / 20 / 15 20 / 20 / 15 15 / 15 / 15 15 / 15 / 12 15 / 15 / 12 15 / 15 / 12 15 / 15 / 12

    ATC (Unit : Tools)

    Carousel type (Opt.) 16 / 20 20 / 24 20 / 24 20 / 24 20 / 24 N / A 20 / 24 20 / 24 N / A N / A N / A N / A N / A N / A

    Swing Arm type (Opt.) 24 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30 24 / 30

    Chain type (Opt.) N / A N / A 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 32 / 40 / 48 32 / 40 / 48 32 / 40 / 48

    SPINDLE

    Type-CAT/BT/DIN (Opt. HSK) 40 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50 40 / 50

    Motor (cont 30min) 5.5-7.5 kW (7.5-11kW) 7.5~11 kW (11~15 kW) 15-18.5kW (18.5-22kW) 11~15 kW (15~18.5 kW) 15~18.5 kW (18.5~22 kW)

    Belt-drive BT-40 8000 rpm (10000 / 12000 rpm) 8000 rpm (10000 / 12000 rpm)

    Direct-drive BT-40 (Opt.) 10000 / 12000 / 150000 rpm 10000 / 12000 / 150000 rpm

    Build-in spindle (Opt.) 20000 / 30000 rpm (BT-40/ HSK-E40/50/63) 20000 rpm (BT-40/ HSK-E63) 20000 rpm (BT-40/ HSK-E63)

    Belt-drive BT-50 (Opt.) N / A 6000 / 8000 rpm 6000 / 8000 rpm

    Direct-drive BT-50 (Opt.) N / A 8000 / 10000 rpm 8000 / 10000 rpm

    MISCELLANEOUS

    Power consumption (KVA) 25 35 35 35 35 55 45 45 55 55 55 55 55 60

    Pneumatic supplier (kg/cm2) 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5 5.5~6.5

    Coolant tank capacity (liter) 256 350 367 367 480 550 501 501 580 630 650 650 650 650

    Machine weight (kg) 4800 6500 6800 6800 7800 14000 11000 12000 15000 18000 20000 23000 27000 30000

    Floor space (LxW) (mm) 2180 x 2040 2620 x 2090 2900 x 2090 2900 x 2090 3600 x 2244 4600 x 3200 4400 x 2244 4520 x 2244 4800 x 3200 4800 x 3312 4900 x 3312 5420 x 3475 5700 x 3500 6000 x 3700

    Floor space requirement (with conveyor) (LxW) (mm) 3282 x 2040 3650 x 2090 3735 x 2090 3735 x 2090 4759 x 2244 5800x3200 4560 x 2244 5680 x 2244 6000 x 3200 5950 x 3312 6058 x 3312 6578 x 3475 6900 x 3500 7300 x 3700

    Packaging size (cm) 246 x 229 x 256 280 x 231 x 256 310 x 231 x 256 310 x 231 x 256 350 x 231 x 256 510 x 350 x 360 440 x 232 x 256 540 x 232 x 256 540 x 350 x 360 540 x 370 x 380 550 x 370 x 380 570 x 370 x 380 590 x 370 x 370 630 x 390 x 380

    • Specifications and design characteristics are subject to change without prior notice.• The data shown in parenthesis are optional.

    SMV Series Specifications: