INVENTEC, 26, avenue du Petit Parc - 94683 Vincennes Cedex - FranceTél : +33 (0) 1 43 98 75 00 - Fax : +33 (0) 1 43 98 21 51

COATINGMATERIALS

RELIABILITY & PERFORMANCE

Dry at room temperatureRepairableUV tracedExcellent dielectric propertiesComplies with IPC-CC-830 and MIL-I-46058CUL94V0 and NF EN 61056 approved

COST Energy savings as oven curing is not requiredHigh speed process

ENVIRONMENTAL No toxic. No gases are generated due to absence of isocyanatesNo toluene

RELIABILITY & PERFORMANCE

High accurate depositExcellent chemical and solvent resis-tanceNo crackingExcellent dielectric propertiesComplies with IPC-830CCUL94V0 and NF EN 61056 approved

COST Option for UVLED curingHigh speed process. Very fast curing for short process.

ENVIRONMENTAL Solvent FreeNo VOCsNon-flammable

AVR80 BA Acrylic base

Toxic free

ABchimie 526 UVAcrylate urethane base.

Solvent free. UV dual cure

INVENTEC offers a dedicated range of coatings for applications in electronics assembly.

New generation Conformal Coatings based on ABchimie technology used to extend the working life of electrical and electronic assemblies and ensure reliability of performance, especially in harsh environments.

PromosolvTM Coat and 3MTM NovecTM Electronic Grade Coatings thin coatings as a real alternative to conformal coatings to modify and protect the surface of a component or an assembly.

Conformal Coating

Excellent reliability, compatibility and adhesion results with EcorelTM solder paste range even in No Clean processes.

Used in automotive, aerospace, military, energy and transpor-tation applications.

This offer is not available by Inventec in France, Spain, Portugal, Italy and North Africa.

www.inventec.dehon.com

Thin Coatings

Protection for electronic assemblies against moisture, chemicals and corrosion. Fluoropolymer coatings for challenging components in PCBAs, LED lighting, displays, and flexible circuits. Anti-stiction coatings for MEMS

Functional coating. It is hydrophobic and oleophobic. Besides protecting the coated device, it reduces the surface energy enabling exceptional repellency of moisture and other particles.Protection for electronic assemblies against moisture, chemicals and corrosion.

• 3MTM NovecTM 1700• 3MTM NovecTM 2702• 3MTM NovecTM 2704• 3MTM NovecTM 2708

Cleaning of substrate (i.e. PCBA) is recommended before coating application to improve adhesion properties and get an optimal consumption of the coating. INVENTEC offers a full range of PCBA defluxing cleaners

Cleaningbeforecoating

RELIABILITY &PERFORMANCE COST EFFICIENCY ENVIRONMENTAL

• Low surface energy that repel mois-ture, particles and a broad range of li-quids (water, lubricants, oils and other contaminants).

• Clear coatings with excellent Optical Light Transmission properties, recom-mended for LED lighting applications

• Low viscosity solutions that dry to a very thin protective uniform film (1 µm) over a wide variety of substrates and com-ponents

• Hydrophobic and oleophobic properties

• Thermally and electrically stable with excellent dielectric properties.

• Re-workable for fast and effective repairs

• Comply with UL94V0 and IPC-CC-830B standard

• UV tracer (2704 , 2708, FR 47200 UV and FR 87200 UV)

• Easy-to-apply. By dipping, spray or brush

• No masking is required. Coating over all contacts in PCBA has no affect on functionality

• No curing required (except 2702 and FP 27200)

• Fast drying

• Excellent cost of ownership

• Low environmental impact compared to alternative coating solutions delivered from hydrocarbon solvents

• Nonflammable

• Low Toxicity

• Low Global Warming Potential (GWP)

• Non ozone depleting

• Less energy consumed during manu-facturing

Oct

ober

201

5

• PromosolvTM FR 27100• PromosolvTM FP 27200• PromosolvTM FR 47200 UV• PromosolvTM FR 87200 UV