urceng Thai Cong

COG HOA XA HOI CHU NGHIA VIET NAM Dile 14p - Ttr do - Hanh phtic

UBND THANH PHO CAN THC$ TRVONG DAI HOC

167 THUAT - CONG NGHE CAN THO

86: 64. /QD-DHKTCN C'dn Thu, ngayathang0Lnam 2018

QUYET DINH Ve viec phancOng giang vien danlu4n van tot nghiep,

tieu 1u4n tot nghiep Dal hoc chinh quy khoa 2014 - 2018 Khoa Dien - Dien tir - Vien thong

HIEU TRU ONG TRU'ONG Dig HOC Id' THUAT - CONG NGITE CAN THCi

Can cur Quyet dinh so 249/QD-TTg ngay 29 thang 01 nam 2013 cUa Thu tuang Chinh phu ye viec thanh lap Truang Dai hoc Ky thuat - Cong nghe Can Thu;

Can dr Quyet dinh s6 239/QD-DHKTCN ngay 22 thong 8 nam 2016 cUa Hieu truang Truang Dai hoc icy thuat - Cong nghe Can Thu ban hanh Quy dinh thuc hien Luan van tot nghiep, Tieu Juan tot nghiep dai hoc chinh quy;

Can cd Quyet dinh s6 493/QD-DHKTCN ngdy 31 thong 12 nam 2017 dm Hieu truang Truang Dai hoc KY thuat - Cong nghe Can Thu ban hanh Quy dinh dao tao trinh do dai hoc chinh quy theo he thong tin chi;

Xet de nghi cda Phong Dao tao va Khoa Dien - Dien tix - Vien thOng,

QUYET DINH:

Dieu 1. Phan cong giang vien huang dan sinh vien Ichoa 2 (2014 - 2018), nganh COng nghe ky thuat dien, dientd do Truang, Dai hoc Ky thuat - COng

nghe Can Thu dao tao, lam luan van tot nghiep va tieu luan tot nghiep (có danh

scich Phan cong chi tiet kern theo).

Dieu 2. Cac giang vien huang an va sinh vien thgc hien theo dUng ice hoach, quy dinh cda Twang va quy the dao tao hien hanh.

Dieu 3. Cac Ong (Ba) Twang Ph6ng Dao tao, Truang Khoa Dien - Dien to - Vier' thong va cac giang vien, sinh vien c6 ten tai Dieu 1 chiu trach nhiem thi hanh Quyet dinh. Quyet dinh co hieu luc ke tir ngay kY./.),fi

Nai - Nhu. Dieu 3; - Website truang; - Liar VT.

TWANG DAI HOC 10;7 THUAT — CONG NCille CAN THO

KHOA DIEN — DIEN VIEN THONG

CONG HOA XA 1101 CHU NGHIA VIET NAM Doc 14p — Tkr do — Ranh phtic

TH4 4,

TRUbNG DA1 HOC

DANH SACH anh sach thtyc hien 1u4n van tot nghiep Dai hoc nam 2017 - 2018

( ' KY THL4T N CONG

, 2.,

Stt ° CANTHO ,, A .. de tai /) 0

Muc Wen Sinh vien thkrc hien Can WO_ Hulfrng Dan

1 Phan tich he th6ng may phat lien gib DFIG bang phan mem mo phong Matlab/Simulink.

Nang lugng gib IA mot trong nhang nguon nang luting xanh, sach dugc quan tam va phat trien ling dung nhieu nhAt. Vi \fay, he th6ng may phat ang dung cho turbin gib cling dugc phat trien khong ngirng va may Oat dien DFIG vai nhieu au diem la mot Iva chon de Ung dung cho he thong turbin gib. Gi6p sinh vien có the phan tich dugc cac dac tinh dm mot he th6ng tuabin gib DFIG cu the bang phan mem mo phong Matlab/Simulink.

2 N*hien cCru va xay dung mo hinh dieu khien va giam sat 16 nhiet

Giam sat dieu khien va thu thap du lieu hog d6ng cila 16 thong qua phan mem SCADA, TIA Portal. Bien tan nhan tinh hieu tir PLC de dieu khien d6ng ca quat tan nhiet trong 16 de on dinh nhiet dO dinh mix,

Ths. HuSinh Phat Trien

3 Thiel ke he thOrw canh tay robot phan loaf san phan hang khi nen va PLC.

Val sir phat trien ngay cang cao cila nen khoa hoc cong nghe. V 4.,c. Ung dung cac cong nghe tv dOng hod de phvc yuc nhu cau con ngu6i la nhu cau thiet thvc.

Stt Ten de tai Muc tieu

De han the sac lao dOng tay chan dm con nguai, nang cao irng dung to dOng hoa trong day chuyen phan loai san pham trong cong nghiep, vi vay nghien dm Ung dung mo hinh canh tay robot de phan loai san phAm la can thiet, kha thi.Giam sat mo hinh tren man hinh HMI.

Sinh vien dive hien Can 130 Htrifrng Dan

4

Nghien dm, phan tich hieu qua ciia vice bil cong suat phan khang trong mang dien ha the bang phAm mem PSS/ADEP.

Nham giai quyet van de thieu but cong suat phan khang tren lu-ai dien, tranh lam qua tai dung day tali dien do phai truyen tai lugng cong silk phan khang khong can thiet tren luoi. de giai guy& van de nay thi viec 136 cong suAt phan khang tai nai yeu

A . ,, . :. . A „ can thiet. cau la cap bach va can thiet. Vice ung dung phan

. men PSS/ADEP vao phan tich chi SO co lgi, tinh hii..0 quit dm bai toan la rat quan trong trong cong tac quy hoach he thOng dien. Ths. HuSrnh Ph&

Trien

Ths. TO Ai Nhfin

5 - Phan tich cac die kien de. danh

gia du an xdy dung mOt trang trai dien giO.

Nang lugng giO la mot trong n11E-mg nguon nang luting xanh, sach dugc quan tam va phat trien img dung nhieu nhAt. De co the dank gia tiem nang, tinh

11- k a thi cilia mOt khu vuc cu the de tien hanh xay dung mot trang tai dien giO la can thiet, quan trong. • Danh gia tiem nang giO va tinh kha thi du an se giUp cho chti dau to tiet kiem nhieu chi phi, thuan Igi khi quyet dinh dAu to du an.

Nguyen Tan Si 1400371

6 ThiC.4 bi FACTs (Flexible Alternating Current Transmission system)

Tim hieu ve eau tao va hoat dOng cilia cac thiet bi xoay chieu linh twat (FACTs) nhu SVC, STATCOM, IA-IV__

2

Stt Ten de tai Muc tieu Sinh vien tiny hien Can b ifl Htnfrng Dan

Ths. To Ai Nii i.in

va, ung dung cila chUng trong he thong dien.

Tir do nghien dm cac img dung cira chimg vao he thong dien de nang cao tinh on dinh ding nhu nang cao chAt ltrang dien nang.

Bang Thanh Nhan 1350407

Nghien ciru va phan tich cac loai may pith dien gi6

Nghien cdu, phan tich cac loci may phat dien gi6. Tir do danh gia, so sanh cac ket qua dat &roc.

Tiet Van Cuing 1400130

8 Nghien dm ket hap he thong dien mat trai va dien giO quy mo nhO.

Tim hieu, nghien ciru va phan tich cac ma hinh lai ghep giira he th6ng phat dien gie va mat tr6i. Tren co s6 dO, phan tich ket qua cac thanh phan he thong va cac he thong lai ghep.

Cao Mirth Triet 1400394

9 Thiet ke va xay dung mo hinh dieu khien dang co khang clang ba 3 pha bang song vo tuyen RF

De tai se nghien ciru xay dkrng mo hinh dieu khien clang co dien, tir xa thOng qua ba ,thu phat song RF nhtr dial khien 'long cat, dial khien dao chieu dung co, dieu khien tang giam tic do clang co va thiet lap cac img dung trong thirce

Nguyen Hai Bang 1350446

%'. :.

Ths. Vo Minh Thien

Ks. TrAn Trunat-, Khanh

10

Xay ,dung ma hinh dieu khien chuyen mach ATS va giam sat nang luting dien sir dung trong he thong tir xa bang PLC S7-1200

Van dung kien thirc a hoc va thiet ke 66' chuyen manh ATS, lap trinh chuyen mach theo yeu cau tir cac irng dung trong thirce. Thiet lap Om sat cong suat dien nang lieu thu tir xa bang ba PLC S7-1200

Huynh Nguyen Xuan Vinh 1400477 Duong Chi Thanh

1400430

11 Tinh toan va thiet ke mang phan phai 3P-22kV va tram bien ap 110kV trong he thong dien

Tang hop kien thirc da hoc de tinh toan thiet ke mang va tram bien ap 110kV theo yeu cau dat ra cira cac dieu kien van hanh trong thkrc te.

TrAn Minh Mut 1400540

1?

, Xay ,dung mo hinh

dung chuyen mach h6a clang ba hai may Oat dien 1 pha 5kVA

va h6a vao ltrai dien he thong IP- 220V.

khin Tong hap kien thirc da hoc HIV& ke ma hinh chuyen mach h6a clang ha 2 may phat,

lap trinh dieu khien va van hanh ma hinh h6a vao luai dien theo yeu cau sir dung

Nguyen Lu. Dang Khoa 1400240

HuYnh Van Phu 1400403

13 dieu khien, Xay dung mo hinh dieu khien, van hanh va giam sat tram hien ap

Tang hop kien thirc da hoc thiet ke ma hinh tram bien ap 110kV tir do thiet lap cac thOng so dieu khien, van hanh va giam sat mo hinh theo yeu cau.

Nguyen Thanh Trung 1400050

Nguyen Qu&:, Thai

3

Stt Ten de tai Muc tieu Sinh vien thuc hien

1400360

Can WO Huong Dan

110kV bang b6 PLC S7-1200. Thong qua b6 dieu khien PLC S7-1200 va man hinh HMI

14 Tinh toan va thiet ke dOng co 3P- 1HP-220/380V 6 circ (950V/p).

T6ng hop kien thirc da hoc, thiet Ice dOng co dien 3P-1HP-220/380V tir d6 tien hanh quail day cho thing co, van hanh do dat cac thong so so sanh vai cac thOng so cua not so nha san xuat khac

Pham Duy Nguyen 1400277

15

Lap trinh dieu khien van hanh va giam sat day chuyen san xuat dau hit quy mo vira va nho bang b6 PLC S7-1200 tai Phirgng Cai Khe, quan Ninh Kieu, Tp Can Thu.

T6ng hop kien thin da hoc de tinh toan thiet ke van hanh va giam sat day chuyen san xuat &au hii quy mo vira va nho bang giai phap tir &Ong h6a thay the cac cong doan thoc hien bang thil cong truck day. Floan chinh day chuyen van hanh san xuat theo yeu cau dat ra.

Mai Hoang Trong 1400388

Nguyen Thanh Binh 1350184

16

Tinh toan va thiet ke mo hinh Ong co dien 3 pha 380Vvan hanh , , 2 cap tot dO sir dung trong tong nghiep.

Tong hop kien thirc da hoc thiet ke Ong co dien 3P-380V hai cap toe dO tir d6 tien hanh quan day cho dong co, van hanh do dat cac thong so so sanh ,. , ,. A , ,, A , ., , . vai cac thong so cua mot so nha san xuat khac dua ra nhan dinh cua nghien ciru. , ,

Lai Van Tao 1400084

17

Tinh toan va thiet ke Ong co dien 3 pha khong d6ng b6 380v-5HP 8 cut (750 v/p) va van hanh sir dung trong cong nghiep.

Tong hop kien thirc da hoc thiet ke Ong co. dien 3P-5HP-380V — 7750V/phut tir do tien hanh quan day cho d6ng co, van hanh do dat cac thong so so

A , A

c ua mot sanh vim cac thong so cua mot so nha san xuat khac dua ra nhan dinh cua nghien ciru.

18 Loa chon va xay dung may in 3D. Tim hieu, lira chon cac mAu may in 3D opensource co san, chon 1 mau kha thi de hoan thien

Ths. Huynh NguyZn Xuan Can

19 Dieu khien thiet bi bang am thanh.

Hieu throe phan tich tan so pho am thanh, phan biet dirge 1 so am thanh co ban c6 06 tan so dac hung

de co the dieu khien duoc thiet bi dtra vao am thanh d6.

Huynh Nhu 1400012

20 Xay dung he thong theo doi chi . so BMI cho ngtrefi.

Xay dung thiet bi can Ong va do chief' cao thong . , A A. . minh, co ket not Internet de tinh toan chi so 13MI (body mass index) cua nguoi, giup theo di-5i tinh

Nguyen Thi Anh Thu

1400450

4

Stt Ten de till Muc tieu Sinh vien thiye hien Can bii Huong Dan

trang sire khoe dm ngtrai

21

Thiet ke he thong cung cap dien cho day 1 tret 6 lau Dai hoc ky- thuat cong nghe can tho. Tinh toan giam chi phi cho cac thiet bi tiet kiem dien nang va giam chi phi so vai thiet bi dien hien tai.

Thiet ke he thong cung cap dien cho tea nha met each toi tru. - Lkra chon kiem tra cac thiet bi dien theo hfrang tiet kiem dien nang. - Tinh toan thiet ke mach va chieu sang. Chong set va each di so do day cho t6a nha. - Du toan chi phi .

Cao Binh Nguyen 1350412

171.-* Ths. Nguyed`QC'-‘1

t4) Van Khan Isle :14.sN.,

1400098

Le Trong Nghia

22

Thiet ke he thong cung cap dien cho day 1 tret 6 rail Dai hoc ky- thuat cong nghe can tho. TOi tru viec viec tinh toan bang phan mem mach &Ong 1uc ecodial va chieu sang luxicon.

- Thie't ke he thong cung cap dien cho toa nha met . each toi fru bang phan mem ecodial. -Tu (tong chon,kra, bi bang phan mem . - Tinh toan thiet ke mach va chieu sang va chon be den bang luxicon. Chong set va each di so do day cho tea nha. - Du toan chi phi bang phan mem.

Le Thi Tuyet Huang

23

. Kith() sat tinh toan cac thief. bi , dien va thong so bao ve relay trong nha may nhiet dien duyenhai Tra vinh ( So de nhat thin).

-Tinh toan tirng relay bao ve

-Nguyen ly va nguyen tae bao ve' relay... 1400230

24

Khao sat tinh toan cac thiet bi dien va thong so bao ve relay trong nha may nhiet dien duyenhai Tra vinh ( So do nhi thir).

_ Tinh toan tirng relay bao ve

- Nguyen ly va nguyen tae bao ve relay... Pham Van Huang

1400323

25 Khdo sat tinh loan he thong dien to dung trong nha may nhiet dien duyen hai 'Era vinh .

- Phan tich cac thiet bi to dung

- Nguyen IY chinh luu DC dau ckxc may phat dua vao roto

VO Trtrang Thinh 1400271

26 Nghien dm va what trien (mg 116 try sinh vien trong viec tong hop cac kien thuc Ths. Nguy'Zn Phti Qui

5

Stt Ten de tai Niue tieu Sinh vien thtyc hien Can bo •

Hirekng Dan dung RFID trong quail lyi giam sat sinh vier'.

chuyen mon da hoc va Ung dung yao, thtrc tien thong qua viec thuc hien de tai. Thiet ke he thong phan tich dugc cac thong so cUa mOi trtrOng va xir ly, de dieu khien &roc cac thiet bi.

27 Lap trinh dieu khien canh tay Robot xep hang hoa nhap, xuat kho.

Thiet ke ma hinh ngan xep hang h6a trong kho,thiet ke giao dien vi tri dat hang h6a, co. so'dulieu luu thong tin hang hOa.Lap trinh dieu khien canh tay Robot nhan, tra hang theo yeu cau. ,

28 Nghien Ciro, thiet ke 136 cam hien

Chung cu. va dieu khien thiet bi trong can ho

Thu thap va phan tich so lieu tir cam hien nhtr: anh sang, nhiet do,do am.Co the dieu khien thiet bi tir xa qua song RF co bao mat,sOng Wifi cap nguon cho mot so thiet bi nhtr den,may bum...

29 Giam sat tinh trang sac khoe cua benh nhan ye nhiet do va nhip tim.

Nam bat kip th6i str phat trien ctia cong nghe ung dung vao y te, tim hieu ve PIC 16F628A, Arduino. Tren co so dO thiet ke he thOng do nhip tim hien thi tren LED 7 doan va giam sat qua Smartphone.

Ths. Vu Van Quang 30

Thiet ke he thon giam sat va g Dieu khien img dung trong "Green House".

Khdo sat, nghien dru cac giai phap dieu khien hien nay va cac cam hien nhiet d6,d6 am,anh sang.Thiet ke he thOng giam sat va Dieu khien nhiet 046 am,anh sang trong nha kinh bang DTDD

31 Nha thong minh-thiet ke he thong ' * giam sat va dieu khien.

Tim hieu ve cac giai phap giam sat va dieu khien trong nha nhtr nhiet d6,anh sang,khi gas..

3? Thiet ke bo Solar Inverter sir dung IC SG3525.

Tim hieu thiet bi hien doi nang luorng mat tr6i sang dien,tim hieu va thiet ke. b6 hien doi hang luyng mat tr6i dUng IC SG3525 ap dung cho cac thiet bi cong suat nho.

6

Stt Ten de tai Muc tieu Sinh vien thn.c hien Can b0 Htro. mDan

33 Thiet ke mach quang bao v6i 8051.

Tim hiL cac kien thirc co sa ve thiet k6 mach ,

quang cao, vi dieu khien 8051 img dung vao thirc to thie't ke' mach quang cao.

Le Thanh Mat 1400439

34 Nghien ciruang dung nang lutingmat tr6i born nix& ket hop cong nghe, tu6i nho giot.

- Nghien eau mo hinh Cmg dung nang luting mat tr6i born mak ket hop cong nghe tuai nh6 giot.

- Danh gia, so sanh mo hinh Cmg dung nang luting mat tr6i born mr6c va ttrai nho giot so vai viec

&ir bum nu tai cay truyen thong - Phan tich khi sir dung nang Itrong tai tao than

thin mai trul:mg thay the nang luting hOa thach, giam luting ntrac sir dung, giam sir dung phan bon, thuoc bao ‘/' thtrc vat,...

0

Ths. Tr;in H Tinh 35 Nghien ciru quy hoach ma rang

ltrai dien truyen tai. Sir dung giai thuat can hien va nhanh.

- Nghien ciru 1/ thuyet clang ctrc dai va mat cat toi thieu.

- Thuat toan dtroc xay dung tren ham toi tru songuyen va sir dung giai thuat can bien va nhanh. Thu:at toan nay &roc ap dung nham xac dinh toi tru hod vi tri va ma rung cong suat truyen tai tren he th0ng hien him va dap Crng yeu cau du doan phu tai dai han.

36

Ap dung thuat toan PGPSO (Pseudo Gradient Particle Swarm Optimization)

- Nghien ciru phuong phap giai bai toan quy hoach ma rang ltrai dien. - Ap dung phuong phap thOng minh nhan tao nfitm giai haltoan quy hoach ma rang Itrai diem truyen tai dap Crng yeu cau ngdy tang tang cUa phu tai, thod man nhimg dieu kinrang buOc ve kinh to va ky thuat.

7

Stt Ten de tai Muc tieu Sinh vien thkrc hien Can bo

Iltra.ng Dan

Ths. Tran Him Tinh

giai bai toan quy hoach ma rang luai diEn truyen tai

37 Thiet ke hE thong cung cap dien benh vien Nga Sau — Chau Thanh.

Nghien dm ang dung giai phap cung cap dien cho benh vien nham dap ling cac chi tieu ky thuat va kinh tie. Tinh toan thiet ke hE thong chieu sang trong nha va ngoai troi, tinh toan not dat an toan cho he th6ng va ngu6n du phong. , , ,

Pham Quang Minh 1400164

38 Thiet ,ke cung cap dien chief' sang cho cau Can 'rho

Nghien dm cac phucrng phap de thiet ke chieu sang va lira chon phucmg phap phif hop dat hieu qua tiet kiem nang Luang. Tinh toan, phan tich va sir dung phan mem dE thiet ke chieu sang cong Ong, cac ket qua tinh toan duoc vao thuc to mang tinh hieu qua.

Lu-u Tru*ng Giang 1400390

39 Thiet ke he thong cung cap dien cho nha khach cong an tinh Ca Mau

- Nghien calf cac phuang phap tinh toan cung cap dien va hra chon phuang an tai uu. - Tinh toan thiet ke cung cap dien cho cac tai tieu thu dE dam bao cac chi tieu ky thuat ve chat Luang dien nang, cung cap dien lien tuc WI chi tieu kinh to vE ti6t kiem chi phi, chi phi van hanh thap.

Tran Nhat Nam 1400554

PHONIC NCKH - HTQT

KHOA HIEN-DT-VT

Tp Can Thu, ngily thong nom 2018 Nprol, Iap

Wang Thai Cong

Huynh Phat Trier'

8

IRiloNG DA111QC KY THUAT CONG NGI1U', CAN THO

KHOA DIEN — DIEN T1X - VIEN THONG

CONG HOA XA- HOI CHU NGHIA VIET NAM Doe lap — Ttr do — Hanh phfic

DANH SACH Danh sach thtyc hien tieu lu;an tot nghiep Dal hoc nam 2017 - 2018

Stt Ten de tai Muc tieu de tai Sinh Vien Thtrc Hien

Can 130 RuO•ng Dan

Ths. Vel Minh / Thien ,, /

1

Nghien dm van hanh , va dieu khien d6ng co khong dong b6 3 pha bang b6 bien tan iG5A LS trong san xuat cong nghiep

T6ng hop cac kien thirc da hoc img dung de Nghien cCru dac tinh d6ng co khong dong b0 ba pha, img dung 13.6 bien tan dieu khien va van hanh dOng co khong dong b6 3 pha

2 Nghien dm van hanh s va dieu khien dOng co khong &rig b6 3 pha bang b6 bien tan Siemens trong san xuat cong nghiep

T6ng hop cac kien thirc da hoc ting dung de Nghien call dac tinh dOng co khong (long b6 ba pha, irng dung b6 bien tan dieu khien va van hanh d6ng co khong &mg b0 3 pha

3

, Thiet ke va trien khai day quan dong co. khOng d6ng WO 1P-220V-1HP (1500v/p)

Tong hop cac kien thirc d5. hoc Cmg dung de Nghien dm dac tinh van hanh cua dong co dien dong b6, thiet ke trien khai quan day d6rig co dien khong dong b6 1P-220V-1Hp

Nguyen Minh Phung 1400357

4 Thiet ke va trien khai day quan dong co khong d6ng b6 3P- 220/380V-1HP (1500v/p)

Tong hop cac kien thirc dd hoc Cmg dung de Nghien eau dac tinh van hanh cua &Ong co dien dong b6, thiet ke trien khai quan day dong co dien khong d6ng b6 3P-1I-Ip

Mai Thanh Son 1400437

5 Thiel ke va trien khai day quan dOng co khOng d6ng 1)6 1P-111P 8 cuc (750v/p)

Tong hop cac kien thirc d5 hoc (mg dung de Nghien dm dac tinh van hanh cua (king co dien dong bO, thiet ke trien khai quan day thing co dien khong Tong. bO 1P-11-1p

Nghien cim on dinh cua he. th6ng diem vai sir tham gia cua may phat then gio.

,

"Fran Thanh Tu 1350394

6 Danh gia on dinh he th6ng dien voi sir co mat cua may phat dien giO.

Phan "Thanh Nhan 1400025

Ths. To Ai Nhan

7

. Nghien Lim mo Binh may ca trong phan tich qua do.

Tim hieu cac mo hinh may cat CO san tron2, Matlab. TU do phan tich cac ket qua dat throe cua mo hinh iron phan tich qua do.

1

Stt Ten de tai Thy tieu de tai Sinh Vien Thtic Hien

Can WO Hu.o.ng Dan

8

Nghien cau ye he. thting truyen tai met chieu dien dp cao FIVDC (High Voltage Direct Current)

Tim hieu ve he thOng truyen tai met chieu linh hoat HVDC. Tir dO danh gia ducrc,hieu qua culla viec sir dung chUng de thay the cac he thong truyen tai xoay chieu dien dp cao hien co.

9

Khdo sat cac dap ang qua de ciia may phat dien gio DFIG (Doubly- Fed Induction Generator) duai dieu kien ngan mach doi ximg xay ra tren krai dien.

Tim hieu ve eau triic va hoat Ong dm may phat dien gi6 DFIG, va cac dieu kien ngan mach )(ay ra tren he thong dien. Tir do nghien dm cac dap ang qua, de cua may phat dien giO DFIG dtrai dieu kien ngan mach doi ximg xay ra tren he thong dien.

Luang Tran Thao Hanh

1400171

10 Khdo sat dac tinh qua de dm turbine giO toc de khong doi.

Tim hieu ye , cau true va hoat Ong dm turbine gi6 tOc de k.hOng (lei, va .cac dieu kien ngan mach xay ra tren he thong dien. Tir do nghien dm cac dap, (mg qua do cua turbine giO tOc de khong dei, drat dieu kien ngan mach xay ra tren he thOng dien.

Nguyen MinhThiep 1400059

11 Nghien ciru, thiet ke be thiet bi do do tu cam I, tir 2001111 den 500m11

Cac thiet bi do thong, so dien tr&, dien dung cua tu dien kha pho bien tren thi trueng, nhung, cac thiet bi do thong so de tu cam rat hiem va thieu chinh xac. Tuy nhien, yeu cau de do thong so de tu cam cua cuon

cam day, cua mach dien, dac biet la de rat cua cac board mach cao tan là rat quan

tr9ng den, cOng suat phat song cua an-ten. Vi vay, can phai thiet ke met be do dtruc cac thOng so cho mach phan tit nay cua mach dien.

'His. Nguyen Phu Qui

12 Nghien ciru, thiet ke be dieu Ngdy nay. cuec song ngay cang duvc phut

2

Stt Ten de tai Muc tteu de tai Sinh Viet] Thtyc Hien

Can WO' Hwang Dan

khien tix xa va truy van thOng tin thiet bi ghi nhan qua song dien thoai GSM.

vu tot hon tong ngay. Con ngtrai can &roc giai phang sac lao clang nhung hieu qua cong viec phai tang &roc nang cao. Vi vay, nhu cau giarn sat va diet' khien tir xa la rat cap thiet nham vao muc tieu teen. Do de, de tai thiet ke mat he, thong to ,dang cho pile') ngtrai sir dung dieu khien tat/ma cac thiet bi dien trong nha thong qua viec giri tin nhan SMS la rat can thiet va mang lai hieu qua thiet that.

Sinh vien se xay dung mat mo hinh thu nho dm mot Oa nha van phong, cho phep cat , . . dat cac gta'i phap chieu sang va cach nhiet thong minh de Wen hanh Mid° sat, danh gia hieu qua ti6t kiem dien.

Tits. Ng uyen Phi, Qui

13

Nghien ciru, thiet ke he thong lay

anh sang to clang va chief' sang thong mink, tiet kiem nang hrong cho ho gia Binh.

14 Nghien ciru, thiet ke bo nghich hru ap mot pha tao song dang sin 100W.

Thiet Ice bo nghich Itru tir dien at) DC 12V sang AC 220V, tan so co the thay doi tir 20Hz den 60Hz, cong suat tai dap img dtruc tren 100W.

15 Nghien eau va thiet ke bo canh bao sai pha, qua clang, qua ap va mat nguon.

De dap ang dm:iv yeu cAu neu tren, sinh vien can thiet ke mat ha thiet bi co kha nang dieu khien tir xa bang song RF co biio mat. Dieu khien &rot nguon thiet bi cho cac bo xa nhau, mot bo Om nhieu thiet hi. Dong thoi, cac bo nay phai dam bao nha dugc trang thai diet' khien ngay trtrac khi bi mat dien. Co kha nang ket not veri bo thiet bi khac nhu khac de thong bao trang thdi

16 ffng dung cone, nghe RFID trong ltru vit., truy xuat ca SO dCr lieu va nhan dang sinh vien.

- 'chi& ke bo doc the RFID va truyen tin hieu giao tier) vai may tinh.

- Lap co so'dir lieu mau cac thong tin co

Wing Van ()min 1400424

3

Stt Ten de tai Muc tieu d tai Sinh Vien Thirc Hi?n

T Can hi) Hu.o-ng 1)An

ban dm sinh vien.

- Thi6t ke giao dien thong tin nhan dang sinh vien.

- CO the shm va sira cac thong tin theo mot so yeu cau.

17 Thiet ke chieu sang Ba Tri - Ke Sach

- Ap dung cac *rang phap de thi& 1(6 chieu sang phi' hop dat hieu qua tiet kiern nang *mg.

- Tinh toan thiet lc' chie.0 sang cong cong va sir dung ph5n mem de thi& ke. Phan tich va de xuat ket qua tinh toan dirge vao thuc to mang tinh hieu qua.

- Nghien ciru tong hap cac giai phap tiet

• kiem nang luting de xuat img dung vao chieu sang cong cong.

- Tinh toan, so sanh cac giai phap tiet kiern nang luting vai giai phap sir dung hien trang. Ths. Tran Iiii.0

Tinh

18 Nghien ciru cac giai phap tietkiem nang luting cho chieu sang cong cong.

19 Nghien cim img dung phan mem Power World Simulator

- Nghien dm each sir dung phan mem Power World Simulator

_Sir dung phan mem vao cac bai toan toi uu di hoa phan b6 cong suat, bei man quy hoach

lirai dien truyen tai va phan phOi..

Nguyen TrAn Viet An 1400008

20 Khao sat va phan tich doting day 22kV - Can Thu.

- Nghien dm cac phirong phap phan tich broi dien phan phoi. - Phan tich luai dien hien trang theo cac tiC..‘u chuan ve ton that di'n ap va ,tOn that dien nang mang luai dien phan phoi 22kV,

4

Stt Ten de tai Muc tieu dt tai Sinh Vien Thuv HiO

Can bi) Htarng Dan

nang cao he so cong sudt va bit ding suAt phan khang cho phu tai.

21

Phan tich va mo phong mo hinh nang tich trir luting dang khi nen

CAES trong Matlab/Simulink

Dua ra dtrac cac iru diem va khuyet diem , • dm he thong tich till nang 'Iron dang khi - nen CAES. MO ph6ng he th6ng trong phan mem Matlab/Simulink de phan tich cac dac tinh dm he th6ng.

22

Phan tich va mo phong mo hinh tich tat nang lacing clang pin Li-on trong Matlab/Simulink

Dua ra dugc cac tru diem va khuyet diem oh he th6ng tich WI nang luting dang khi nen CAES. MO phOng he th6ng trong ph'an mem Matlab/Simulink de phan tich cac dac tinh dm he th6ng.

Ths. Huynh Phat Trien

23 Phan tich Nth mei phong mo hinh tich tra nang krong mat trOi trong Matlab/Simulink

Dua ra &roc cac tru diem va khuyet diem cua he th6ng tich tra Wang luting mat trod. MO phOng he th6ng trong phan mem Matlab/Simulink de phan tich cac dac tinh cua he th6ng.

24

Phan tich va mo phOng mo hinh dien gi6 cong suat 250kW sir dung may phat dang PMSM trong Matlab/Simulink

Dim ra &roc cac tru diem va khuyet diem - ,

cua he thong dien gi6. MO phOng he thong trong phan mem Matlab/Simulink de phan tich cac (lac tinh cua he thong.

25 Thiet ke he thOng canh tay robot phan loai san pham bang khi nen va PLC.

Val su phat trien ngay cang cao cua nen khoa hoc cong nghe.. Viec Ung dung cac cong nghe w dOng hod de phuc vuc nhu cau

Nguyen Duy Skr 1350361

5

Stt Ten de tai Muc tieu de tai

con ngfreyi Id nhu cau thiet thirc.

De han the sac lao Ong tay chan dm con nguai, nang cao ling dung tu Ong hoa

trong day chuyen phan loai san pharn trong cong nghiep, vi \fay nghien cfru ang dung mo hinh canh tay robot de phan loci san pha'm la can thiet, kha thi.

Sinh Vien Thkrc Hien

Can bii Huang Min

26 Thiet ke mach do nhip tim voi Tim hieu, nghien cal ve cam Men nhip . tfm,PIC I6F628A.Thiet ke he thong do nhip tim hien thi tren LED 7 doan. ,

Ths. Vu Van Quang

77 Thiet ke mach do nhip tim dUng Arduino Uno va LCD.

Tim hieu, nghien ciru ye cam bien nhip tim,Arduino.Thiet ke he thong do nhip tim hien thi tren LED 7 doan.So sanh yen he thong dung PIC.

28 Thiet ke mach dieu khien Ong co• btrac dimg PIC16F877A NIA LCD.

Tim hieu ve ,Ong co• buoy va phucmg phap dieu khien Ong co. buot,PIC 16F877A.Thiet Ice mach dieu khien Ong co• buac hien thi tren LCD.

Ths. Vu Van Quang

29 Thiet ke mach dieu khien den Led.

Tim hieu ve mach dieu khien den LED, mach quang bao, nghien dru IC ho AT89Cxxxx.Thiet ke mach dieu khien den LED dung AT89C51.

Pham Xuan Truang 1400055

30 Thiet ke he th6ng canh bao dicing tram qua SMS.

Tim hieu ye Arduino Uno R3,cam bien sieu am,AVR Atmel 8bit ho-ac ARM Atmel 32bit.Thiet ke he thOng m6 dm dung the tir va thOng bao qua SMS.

Nguyen Qucie Quynh 1400207

31 ,

Thief ke be dieu khien doing co. T Tim hieu ve Ong ca Scrvo,Module Bluetooth FIC-06, Module LM 2596.

6

Stt Ten de tai Mne tieu de tai Sinh Vien Thtyc Hien

Can be) Huirng Din

Servo bang dien thoai di deng. Thiet ice he thong dieu khien Ong ca Servo bang Smartphone.

32 Thiet ke deng he se LCF

Tim hieu cac c6ng logic AND,NAND..., ho PIC.16F62x hoac PIC 16F87x.Thiat ke &Ong he so do gia tri cuen cam ter 1Hden 10H,dien dung ter 1pF den 6500F,tan so tir 0.05Hz den 5MHz va hien thi tren LCD.

33 Tim hieu N thong theo (lei Whip - tim va 'tong de Oxy trong mau.

Tim hieu cac chi se,thuatsngfr sir dung trong do,theo dOi nhip tim, nong de Oxy trong man.Tim hieu cam Wen nhip tim va Oxy trong mau MAX30100,Arduino.Mo pheng nguyen lt lam vi'ec oh N thong.

34 Che tao he thong den thong minh nher vao cam bien chuyen deng va cam bien anh sang

Xay dung he thong den chieu,sang dkra vao dieu kin mei tnreng (sang toi) va nhan biet chuyen eking de bat den.

VO Dirc Linh 1350433 Nguyen Xuan Can

Ths. Hujinh

35

Thiet ke mach ATS ket hop dung dieu khien tkr deng dm dai hoc KTCN Can Tha

- Thkrc hien mach chuyen del ATS tir nguen N thong sang nguon may phat to deng

, - tinh toan cac thong so chon thiet bi

- Khdo sat thiet lap th6i gian &mg cat

Dang Minh Quart 1400294

Ths. Nguyen Van Khan

36 Khdo sat he thong kich tir 6 may phat dien DC

- Tim hieu va do dat thong so he thong kich tix DC de dieu chinh dien dp mong muen trong may phat

- So sanh cac clang dien kich tir

Stt "Fen de tai Muc tieu de 61 Sinh Vien Thip Hien

Can bil Hu.ong Dfin

3

38

Khao sat he thong kich tir a may phat dien AC

Tim hieu va do dat thong s6 N th6ng kich tix DC de dieu chinh dien dp mong muon trong may Oat

- So sanh cac dOng di(1 kich tir

Tim hieu thiet ke PLC trong mach dieu khien tode;Ing nha may xi mang Hau giang.

- Kha nang dat &sac d9c ,va tim hieu ye PLC va giant sat dieu khien

- lap trinh dtrac dieu khien Dang Minh Tit

1400075

39 Sir dung phan mem mo phong cung cap dien cho benh vien da khoa Chau Thanh Hau Giang.

- Tim hieu phan tich duvc cac phan mem tich hop trong thiet Ice cung cap dien

- Thuc hien thiet Ice mach va van hanh tren phan mem mo phOng

40

Sir dung phan mem powerword mo he thong dien truyen tai phan phoiien va tinh toan giai quyet stx coO he thong dien.

- Tim hieu phan tich &rat cac phan mem mo phong va phan tich sir co trong he dieing dien

- Thue hien thiet ke mach va van harth tren phan mem mo phong

Dinh Doan Duy 1350265

41 Sir dung phan mem matlab simulink phan tich sir co he thong dien va tao giao dien dieu khien.

- Viet lenh tren phan mem de thay the tinh toan bang tay

- Tinh toan so sanh tinh toan brig tay

8

Ditang Thai COng

Stt Ten a tai Muc tieu a tai Sinh Vien Thtrc Hi0

Can b'cl Htro Dan Dan

42

Sir Sir dung phan mem matlab simulink mO phong cac thong so caa may phat.

- Nghien dm dac tinh may phat

- Van hanh cac the dO hoat dOng tir do dtra cac thiet bi bao ye.

PHONG NCKH - HTQT

BAN GIAM HIEU KHOA HIEN-HT-VT

Tp Can Tha, ngay thong nam 2016 Nguoi 1(ip

vr

HuSTnh Phat Trien

9