collated fasteners, tools and...

Air Tool Fasteners Coatings & Corrosion Tools Applications SupportImpulse Tool Fasteners

COLLATED FASTENERS, TOOLS AND ACCESSORIES

Click to start


PRODUCT RANGE

TOOLS

IMPULSE TOOL FASTENERS

APPLICATIONS

AIR TOOL FASTENERS COATINGS & CORROSION


IMPULSE TOOL FASTENERS

STAPLESBRADSNAILS


Nail Head Types Nail Shank Types Nail Point Type

Nail Collation Type

FASTENER SPECIFICATIONS – NAILS

D-HEAD

Offers similar performance to round head nails but enables fasteners to be collated hard up against each other.

SMOOTH

Smooth shank nails provide excellent holding power in most timber applications.

DIAMOND

The most common and easiest to drive.

PROSTRIP PAPER TAPE

No collation material is left on the job site.

ROUNDRIVE

New style of head design allows for tight collation and ensures much greater holding power.

RING

Ring shank nails provide superiorwithdrawal resistance in softwood receiving timbers.

DEKFAST

Offers an aesthetic appearance when counter sunk into treated pine, gives the look of a round head nail.

SCREW/TWIST

Excellent for hardwood receiving timbers.


FASTENER SPECIFICATIONS – BRADS

Brad Head Shape Brad Point Type

Brad Collation TypeBrad Shank Types

LOST HEAD

Where a hidden fix is required.

BLUNT CHISEL

Requires the greatest driving power. Almost eliminates timber splitting.

GLUE COATING


SMOOTH – gauges available:

18 Gauge = 1.2mm

16 Gauge = 1.6mm

14 Gauge = 2.0mm

Wire diameter indication.


Crown Types Staple Shank Types Staple Collation Type

Staple Point Types

FASTENER SPECIFICATIONS – STAPLES

STANDARD CROWN

The industry standard for most applications.

BLUNT CHISEL

Not suitable for clinching applications.

DIVERGENT POINT

Legs travel in opposite directions to increase holding power.

SMOOTH – available in:

Medium wire: 18 gauge; 1.2mm

Heavy wire: 16 gauge; 1.6mm

GLUE COATING

Glue coating – No collation material is left on the job site.

RAISED CROWN

The raised crown is mainly used in wire fastening to timber post e.g trellising in a winery or rural fencing. Crown width 12.7mm.

Coatings & Corrosion Tools Applications SupportImpulse Tool Fasteners Air Tool Fasteners

AIR TOOL FASTENERS

STAPLESNAILS BRADS



Nail Head Types Nail Shank Types

ROUND

Conventional nail head shape. Best suited to applications requiring higher pull-through resistance.

SMOOTH

Smooth shank nails provide excellent holding power in most timber applications. Available in a wide range of lengths and shank diameter.

DOME

Offer an aesthetically pleasing result. Ideal for decking.

D-HEAD


RING

Ring shank nails provide superior withdrawal resistance in softwood receiving timbers.

T & FINISH HEAD

Moderate pull – through resistance. Limited damage to timber surface.

SCREW/TWIST

Excellent for hardwood receiving timbers.



Nail Point Types

Nail Collation Types

DIAMOND

The most common and easiest drive. The diamond point can, however, contribute to splitting in some applications.

CONICAL

Ideal for penetrating steel. Used on nails in steel framed construction.

SHEAR POINT

Helps to reduce the splitting encountered with diamond point fasteners.

BLUNT CHISEL

Almost eliminates timber splitting. Not suitable for clinching applications.

COIL NAILS: Plastic collated – 15 degree and 0 degree

Genuine no-flag nailing system for cleaner, better looking jobs. Ensures positive delivery of nail every time.

STRIP NAILS: Pro-Strip Paper Tape


STRIP NAILS: Duo-Fast Round Head Strip Nails

The system enables round head nails to be collated for 20 degree strip nailers.

STRIP NAILS: T Head Nails

Typically these nails are constructed from a band or wire. The nails are covered in a glue to help protect them from separating.


FASTENER SPECIFICATIONS – BRADS

Brad Head Shapes Brad Collation TypesBrad Shank Type

Brad Point Type

LOST HEAD

Where a hidden fix is required.

GLUE COATING

No collation material is left on the job site. The brads are bound closely together to maximize magazine capacity of the tool.

D-HEAD

Tight collation with improved pull through resistance.

PLASTIC TAPE

Plastic tape will not deteriorate in rain or moisture. Small amount of waste, only flakes of plastic.

CHISEL

A common cut style for most brads and staples.

SMOOTH – gauges available:

18 Gauge = 1.2mm

16 Gauge = 1.6mm

15 Gauge = 1.8mm

14 Gauge = 2.0mm

Wire diameter indication


FASTENER SPECIFICATIONS – STAPLES

Crown Types Staple Point Types Staple Collation Type

Staple Shank Types

NARROW CROWN BLUNT CHISEL

Not suitable for clinching applications

GLUE COATING

Glue coating – No collation material is left on the job site. The staples are bound closely together to maximize the magazine capacity of the tool.

SMOOTH – available in:

Fine wire:23 – 19 gauge; 0.6mm – 1.0mm

Medium wire: 18 gauge; 1.2mm

Heavy wire: 16 gauge & larger; 1.6mm & larger

MEDIUM CROWN

WIDE CROWN

Air Tool Fasteners Tools Applications SupportImpulse Tool Fasteners Coatings & Corrosion

COATINGS & CORROSION

Finish Description Class

Bright • Un-plated

Zinc Plated/Electroplated

• Simplest and cheapest method of providing limited corrosion resistance

Electro Galv • Very common and economic method of providing moderate corrosion resistance

Dacrotised • Polymer coating used to bond zinc flakes to the nail surface

Hot Dip Galvanised

• Most widely accepted method providing long term corrosion resistance

• Product is cleaned and then dipped into a bath of molten zinc

Mechanically Galvanised

• Highly effective method of providing long term corrosion resistance whilst maintaining a high quality appearance

• Nails are coated with zinc by peening

Stainless Steel • Nails are manufactured from stainless steel wire.

• For use in extreme environments where corrosion resisance is imperative.

A polymer or glue coating is applied to the nail shank. This coating performs two functions: Reduces driving force to enable fasteners to be driven using less energy or be driven deeper and greatly increases the resistance to withdrawal.

Corrosion Classes

Class 1: For internal useClass 2: For internal use where significant levels of condensation occurs.Class 3: For external use in mild industrial and moderate marine applications.Class 4: For external use in moderate and severe marine environments (generally from 100m to 300m from the beach front).

Air Tool Fasteners Coatings & Corrosion Applications SupportImpulse Tool Fasteners Tools

TOOLS

FRAMER STRAIGHT BRADDER ANGLE BRADDER


FRAMER

Paslode™ Impulse Cordless Lithium-Ion FrameMaster PowerVent Nail Gun

Paslode™’s Impulse Gas Technology Tools have created a faster and safer method of working on site by eliminating the need to carry heavy air compressors and air hoses.

A new innovation on all Paslode™ Li-ION tools is the addition of an On / Off Battery Position. This increases battery charging life and prevents disengaged batteries dropping from the tool. The On / Off position also saves the cost of replacement batteries and improves work-site safety.

• The Tradie’s choice for all general framing applications.

• Increase power - to eliminate standing nails in harder wood types

• Optimal performance in extreme weather

• Longer run time battery - 9,000 shots per charge


STRAIGHT BRADDER

Paslode™ Impulse Li-ion Straight Bradder

The IM250S-Li uses leading edge Lithium-Ion Battery Technology which packs a real punch. Each charge drives 6,000 shots – 50% more than traditional Nickel-Cadmium technology. Battery charge time has been cut in half to ensure a full charge in just 1-hour.

A new innovation on all Paslode™ Li-ION tools is the addition of an On / Off Battery Position. This increases battery charging life and prevents disengaged batteries dropping from the tool. The On / Off position also saves the cost of replacement batteries and improves work-site safety.

The IM250S-Li is capable of driving both 16 gauge (1.6mm) brads and a heavier 14 gauge (2.0mm) brad for a wider range of applications. Simply Swap’n’Lock the front plates included with your new IM250s-Li.

The Paslode™ IM250S-Li Impulse Bradder is the perfect choice when accuracy, speed and efficiency are paramount.

• Paslode™ impulse technology

• Lithium ION battery technology

• Swap from 16ga to 14ga


ANGLE BRADDER

Paslode™ Lithium-Ion Cordless Impulse TrimMaster Tool

Paslode™’s Impulse Gas Technology Tools have created a faster and safer method of working on site by eliminating the need to carry heavy air compressors and air hoses. With everything needed for operation already on board, the Paslode Impulse IM250A-Li Bradder is ready for any internal fix out action.

The IM250S-Li uses leading edge Lithium-Ion Battery Technology which packs a real punch. Each charge drives 6,000 shots – 50% more than traditional Nickel-Cadmium technology. Battery charge time has been cut in half to ensure a full charge in just 1-hour, featuring a battery on/off position switch for power conservation and safer handling.

A full range of 16 gauge; 32mm to 63mm length nails are available in galvanised or stainless steel finishes.

Application; Cabinet making, Fix out, Glazing bead, Light trim, Panelling, Shopfitting, Window manufacture.

• Paslode™ impulse technology - no cords, no hoses, no compressors

• Lithium-ion battery technology

• Angled magazine - easy to reach tight spaces

• Drives TrimMaster angled brads

Air Tool Fasteners Coatings & Corrosion Tools SupportImpulse Tool Fasteners Applications

APPLICATIONS

FENCINGDECKING

FRAMING ROOFING – TILE BRACING – SHEET & METAL FLOORING – SHEETING

PLASTERINGPLUMBING ELECTRICALMETAL CONNECTORS & BRACKETS

FIX OUTCLADDING


FRAMING

ROUNDRIVE


Impulse Trade Pack

D-HEAD


Impulse Nail Fuel Packs

See suitable nails

ROUND


Duo-Fast Strip Nails

Applications include

• Wall frames

• Roof trusses

• Floor substructures

• Eaves framework


ROOFING – TILE

ROUNDRIVE


Impulse Trade Pack

D-HEAD



See suitable nails


• Setting out battens for roof tiling

• Place roof battens against proud nails

• Fastening Battens for roof tiling


BRACING – SHEET & METAL

DOME HEAD

Offer an aesthetically pleasing result.

Paslode Coil Nails – 15 degree

Duo-Fast Coil Nails – 0 degree

ROUND HEAD





• Plywood bracing

• Braceboard sheet

• Strap bracing

• Metal roof bracing

• Maxi bracing


FLOORING – SHEETING

DOME HEAD




ROUND HEAD




D-HEAD



See suitable nails

Types of sheet flooring include:

• Particleboard

• Plywood


METAL CONNECTORS & BRACKETS

ROUND HEAD




Suitable for connectors and brackets such as:

• Triple grips

• Multigrips

• Minigrips

• Wall brackets

• Tie down straps

• Joist hangers

• Beam hangers

• I-Joist / I-Beam hangers

• Hanger straps

Please follow installation guidelines provided by Metal Connectors Suppliers and relevant industry standards.


PLUMBING

Applications include:

• Fastening noggings for plumbing fittings

• Fastening bath frames

ROUNDRIVE


Impulse Trade Pack

D-HEAD



See suitable nails


ELETRICAL


• Blocking for light fittings

• Blocking for light switches and power points

• Fastening noggings or blocking for supporting ceiling fans ROUNDRIVE


Impulse Trade Pack

D-HEAD



See suitable nails


PLASTERING


• Fastening battens when required for plasterboard

ROUNDRIVE


Impulse Trade Pack

D-HEAD



See suitable nails


CLADDING


• Fastening weatherboards

• Fastening blue boards

ROUNDRIVE


Impulse Trade Pack

Impulse CladFast Handy Pack

D-HEAD



ROUND HEAD




DOME HEAD





FIX OUT


• Panelling

• Dado rails

• Staircase trim

• Handrails

• Eaves trim

• Skirtings

• Door jambs

• Architraves

• Window trim

• Mouldings

• Kitchens

ND Series Brads = 14 gauge

DA Series Brads = 15 gauge

C Series Brads = 16 gauge

C1 Series Brads = 18 gauge

Angled Brads = 16 gauge


DECKING


• Softwood decks

• Hardwood decks

DEKFAST HEAD – RING SHANK

Offers an aesthetic appearance when counter sunk into treated pine, gives the look of a round head nail.

DekFast Impulse Value Pack

Dek Fast Handy Pack

DekFast Trade Packs

ROUND HEAD – RING/SCREW




DOME HEAD – RING/SCREW





FENCING


• Softwood fencing

• Hardwood fencing

D-HEAD



See suitable nails

ROUNDRIVE


Impulse Trade Pack

Impulse CladFast Pack

ROUND HEAD




DOME HEAD




Air Tool Fasteners Coatings & Corrosion Tools ApplicationsImpulse Tool Fasteners Support

SUPPORT

Bunnings welcome the opportunity to quote your next job.

Please contact your local Bunnings Account Manager or call 133 062.

collated fasteners, tools and...

Documents