color-coated screws and fastenersstakefastener.com/sf_catalog.pdf · color-coated screws and...
TRANSCRIPT
Color-Coated Screwsand Fasteners
Stake Fastener Company14395 Ramona Ave., Chino, CA 91710(909) 597-4889 Fax: (909) 597-3043
[email protected] www.stakefastener.com
®
2016
®
Table of Contents
Introduction ......................................................................1
PAN-L-SCREWS ........................................................... 2-0
Screws w/ Captive Washer, Color-Matched .............. 3-0
Decorative Color-Coated Screws ............................... 4-0
Pressure Displacement Stake Fasteners .................. 5-0
Special Fasteners ........................................................ 6-0
Appendix A - Stock Colors .........................................A-0
Appendix B - Technical Notes ....................................B-0
Appendix C - Detailed Product Listing ......................C-0
How To Order: Orders may be placed by email, telephone, fax or mail. Call (909) 597-4889, 8:30 a.m.- 4:30 p.m. Pacific Time, Monday through Friday or fax us at (909) 597-3043. To email an order, send it to [email protected].
No portion of this catalog may be reproduced in whole or in part without prior written
permission from Dupree, Inc.
Typographical, photographic and editing errors in our catalog and website are unin-
tentional and we reserve the right to correct them.
© Copyright 2016 by Dupree, Inc. All rights reserved.
1
Company BackgroundStake Fastener Company, an operating division of Dupree, Inc., specializes in the design and manufacture of unique and novel special appli-cation color-matched fasteners. Our first prod-ucts, introduced in the 1950s, were designed for specific aircraft/aerospace applications. Stake Fastener products continue to be found on all major aircraft in service today, as well as in other sectors of the transportation industry such as buses, trucks, trains, and agricultural equipment. Our products are also widely used on electronic instruments, medical and telecommunications devices, and rack-mounted equipment.
Manufacturing CapabilitiesDesigns are conceived, engineered, tooled, man-ufactured, assembled, stored, and shipped from our 60,000 sq. ft facility in Chino, California. We have expertise in cold heading, screw machine work, threading, injection molding, and coating processes, and work with customers on a global scale, shipping our products worldwide.
QualityStake Fastener Company’s quality manage-ment system (QMS) is ISO 9001:2015 and AS9100:2016 registered, enabling us to maintain close control over our manufacturing processes. Our business systems, inventory management, and quality system are fully integrated with an ERP platform, making this information seamless and accessible.
SummaryWe welcome all inquiries for similar items not shown in this catalog and enjoy working with designers and engineers to propose recom-mendations for their particular application needs. Customers are also always welcome to speak with us in person. We have facilities with room to grow.
Note on RoHS Compliancy:Products that are RoHS-compliant are labeled as such throughout this catalog. RoHS is the Restriction of Hazardous Substances Directive, which restricts the use of certain hazardous sub-
Stake Fastener Company www.stakefastener.com
PAN-L-SCREWS
2-0
PAN-L-SCREWS are pan head screws with a colored head and captive nylon washer molded in matching color. High tensile steel screws are used to provide maximum resistance to screwdriver damage.
Colored coating material on the screw head withstands normal abra-sion, chipping and solvent action. The combination of a hardened base surface and the adhesive qualities of the coating material assure reten-tion of quality appearance after repeated use.
The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment. PAN-L-SCREWS, color-matched to the equipment, blend with the background to eliminate distraction from the information being displayed on the panels.
PAN-L-SCREWSScrews with Captive Decorative Nylon Washer, Color-Matched Screw & Washer
Stake Fastener Company www.stakefastener.com
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. Inventory of all sizes listed in the table and stock colors listed in the forward section of this catalog are carried in stock to assure short lead times. Lengths not listed are also available on order.
4. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws meet all requirements of NAS600 series, including thread size
.086-56 and .216-24 which are not listed as part of the NAS specification.2. Screws are stocked cadmium plated per QQ-P-416, Type II, Class 2.3. Threads are in conformance with MIL-S-8879, except parts with thread
codes “2C” & “12C” which are IAW MIL-S-7742.4. Pan-L-Screws are suitable for applications with temperatures up to 250°F.5. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.6. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 2-1
PS
THREAD
CODE SIZE
.086-56UNC-3A.112-40
UNJC-3A.138-32
UNJC-3A.164-32
UNJC-3A.190-32
UNJF-3A.216-24UNC-3A.250-28
UNJF-3A
2C4C6C8C10F12C14F
316
14
516
38
716
L LENGTH+.00 -.03
+.00 -.06
12
916
58
34
1116
78 1 1
418 11
20
MATERIAL
DALLOYSTEEL
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.250
.625
.375
.438
.500
.562
.312
.057.232
.034.096
.040.137
.043.158
.046.179
.050.201
.037.117
COLORCODE
HEADTYPE
2020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN-L-SCREW .190-32 X 1/2” LG, ALLOY STEEL, PHILLIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 23538
SECURING PANELS AND RACK MOUNTED EQUIPMENT
TYPICAL APPLICATION:
PART NO. EXAMPLE: =
PAN-L-SCREWCOLORED HEAD, MACHINE THREAD,
ALLOY STEEL
PS 10F 8 D S03YE
FEATURES:1. The one piece screw and captive washer simplifies handling, installation and
removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction from the information display by blending with the background.3. Screw heads are formed by cold forging, followed by a heat treating process
which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent
damage to the drive recess and coating material.3. The thread diameters and lengths listed in the table are industry standard
sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in 1/16-inch incre-ments (for example, length code 8 = 1/2-inch long screw).
4. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws meet all requirements of NAS600 series, including thread size .086-56
and .216-24 which are not listed as part of the NAS specification, except for plating requirements.
2. Plating: Zinc plate IAW ASTM B633, Class SC1 (min), Type VI-yellow, hexava-lent chromium free, RoHS-compliant.
3. Threads are in conformance with MIL-S-8879, except parts with thread codes “2C” & “12C” which are IAW MIL-S-7742.
4. Thermosetting coating material is applied to screw head only. A color code of “N02NA” denotes a natural colored washer (molded in natural nylon) and a screw without thermosetting epoxy color coating.
5. Washer color is achieved by molding with pigmented nylon per ASTM D4066.6. Screw head coating and washer colors are matched to customer requirements.
We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 2-2
PS
THREAD
CODE SIZE
.086-56UNC-3A.112-40
UNJC-3A.138-32
UNJC-3A.164-32
UNJC-3A.190-32
UNJF-3A.216-24UNC-3A.250-28
UNJF-3A
2C4C6C8C10F12C14F
316
14
516
38
716
L LENGTH+.00 -.03
+.00 -.06
12
916
58
34
1116
78 1 1
418 11
20
MATERIAL
ZR
ALLOYSTEEL
PHILLIPSDRIVE
RoHS-COMPLIANTZINC PLATE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.250
.625
.375
.438
.500
.562
.312
.057.232
.034.096
.040.137
.043.158
.046.179
.050.201
.037.117
COLORCODE
HEADTYPE
2020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN-L-SCREW .190-32 X 5/8” LG, ALLOY STEEL, RoHS-ZINC PLT, PHILLIPS DRIVE, SEMI-GLOSS BEIGE PER FED-STD-595 NO. 22563
SECURING PANELS AND RACK MOUNTED EQUIPMENT
TYPICAL APPLICATION:
PART NO. EXAMPLE: =
PAN-L-SCREWCOLORED HEAD, MACHINE THREAD,
ALLOY STEEL, RoHS-COMPLIANT ZINC
PS 10F 10 ZR S07BG
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, which increases the basic tensile strength of the corrosion resistant steel by 25%. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with emphasis on
the forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. Inventory of all sizes listed in the table and stock colors listed in the forward section of this catalog are carried in stock to assure short lead times. Lengths not listed are also available on order.
4. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws meet all requirements of MS51957 (UNC-2A) and MS51958
(UNF-2A).2. Screws are stocked passivated per SAE-AMS2700.3. Threads are in conformance with H-28 Federal Handbook for threads.4. Pan-L-Screws are suitable for applications with temperatures up to 250°F.5. Washer color is achieved by molding with pigmented nylon per ASTM
D4066. Natural (translucent) washer is furnished with polished head screw.
6. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-3
PS
THREAD
CODE SIZE
.086-56UNC-2A.112-40UNC-2A.138-32UNC-2A.164-32UNC-2A.190-24UNC-2A.190-32UNF-2A.250-20UNC-2A
14
516
38
716
L LENGTH +.00 -.03
+.00 -.06
12
916
58
34
78 1 1
41MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.250
.625
.375
.438
.500
.500
.312
.057.232
.034.096
.040.137
.043.158
.046.179
.046.179
.037.117
POLISHED SCREW
WITHNATURALWASHER= G02NA
*
COLORCODE
HEADTYPE
202020
161616161616
141414141414
121212121212
101010101010
999999
8888888
777777
666666
5555
4442C
4C6C8C10C10F
14C
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN-L-SCREW, .190-32 X 1/2” LG, CORROSION RESISTANT STEEL, PHILLIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 23594
COLORED HEAD, MACHINE THREAD,CRES, RoHS-COMPLIANT
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
PAN-L-SCREW
PS 10F 8 CP S06YE
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. TORX® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis on the
forming of the TORX® recess to meet design specification.3. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed
Head Machine Screws, except for recess.2. Screws are stocked zinc plated per ASTM B633, Class SC1, Type II.3. Threads are in conformance with H-28 Federal Handbook for threads.4. Pan-L-Screws are suitable for applications with temperatures up to 250°F.5. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.6. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-4
PS
THREAD
CODE SIZE
.086-56UNC-2A.112-40UNC-2A.138-32UNC-2A.164-32UNC-2A.190-32UNF-2A.216-24UNC-2A.250-20UNC-2A
316
14
516
38
716
12
916
58
78
34
1116 1 1
418
L LENGTH +.00 -.03
+.00 -.06
DIM DATA±.020
A DBMATERIAL
11
ALLOYSTEELTORX®
RECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
.250
.057.232.625
.034.096
.375 .040.137
.438 .043.158
.500 .046.179
.562 .050.201
.312 .037.117DT
E
T30
T27
T25
T20
T15
T10 T8
COLORCODE
HEADTYPE
2C4C6C8C10F12C
14C 202020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
COLORED HEAD, MACHINE THREAD,ALLOY STEEL, TORX® RECESS
PAN-L-SCREW .190-32 X 5/8” LG, ALLOY STEEL, TORX® RECESS, SEMI-GLOSS BLUE PER FED-STD-595 NO. 25109
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
PAN-L-SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
PS 10F 10 DT S07BL
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. TORX® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis on the
forming of the TORX® recess to meet design specification.3. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.6.3,
Recessed Head Machine Screws.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Threads are in conformance with H-28 Federal Handbook for threads.4. Pan-L-Screws are suitable for applications with temperatures up to 250°F.5. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.6. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-5
PS
THREAD
CODE SIZE
.086-56UNC-2A.112-40UNC-2A.138-32UNC-2A.164-32UNC-2A.190-32UNF-2A.216-24UNC-2A.250-20UNC-2A
2C4C6C8C10F12C14C
316
14
516
38
716
12
916
58
78
34
1116 1 1
418
L LENGTH +.00 -.03
+.00 -.06
DIM DATA±.020
A DBMATERIAL
11
ALLOYSTEELTORX®
RECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
20
.250
.057.232.625
.034.096
.375 .040.137
.438 .043.158
.500 .046.179
.562 .050.201
.312 .037.117ZRT
E
T30
T27
T25
T20
T15
T10 T8
COLORCODE
HEADTYPE
2020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
COLORED HEAD, MACHINE THREAD,ALLOY STEEL, TORX® RECESS,
ROHS-COMPLIANT ZINC
PAN-L-SCREW .190-32 X 1/2” LG, STEEL, RoHS ZINC, TORX® RECESS, LUSTERLESS GRAY PER FED-STD-595 NO. 36270
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
PAN-L-SCREW
PS 10F 8 ZRT L46GY
TIGHTENED POSITION
CAPTIVE POSITION
INSERTION & REMOVAL
Edge-lighted Panel
Captive Pan-L-Screw Assembly
Hardware Plate w/Fastener
FEATURES:1. CPS remains captive to the panel when the panel
is removed.2. CPS is color-matched with the mounting surface
which eliminates distraction from the information display by blending with the background.
3. Allows up to .06 inch circular mismatch of panel clearance hole alignment with fixed threads in hardware plate.
4. The one piece screw and washer simplifies handling, installation and removal of attachment hardware.
5. May be installed and removed without use of special tools, or damage to either the host panel or the CPS.
6. Screw head is finished with a durable color coating that is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
7. A self-locking feature to prevent vibration from loos-ening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
8. CPS is recommended for use with Type BA or BB pressure displacement STAKE FASTENERS.
NOTES:1. The screws listed in this series reflect aircraft
quality with emphasis on the forming of the Phillips
recess to meet design specification.2. Care should be exercised to assure that the
screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
SPECIFICATIONS:1. The screw head dimensions & recess are based on
NAS601 series. The screw material is heat treated alloy steel, 4037, 4140, 4340 or 8740.
2. Screws and captive metal washer are cadmium plated per QQ-P-416, Type II (yellow), Class 2 or zinc plated per ASTM B633, Type II (yellow) Class SC2
3. Threads are in conformance with MIL-S-7742 and H-28 Federal Handbook for threads.
4. CPS is suitable for applications with temperatures up to 250˚F.
5. Washer color is achieved by molding with pigmented nylon per ASTM D4066.
6. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
7. Captivated metal washer is plated steel.
TYPICAL APPLICATION:
REV 06-2014 2-6
516CODE T
THREAD
6C .140CPS 5
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA
A CB
.375 .220.13D
STEELPHILLIPS
DRIVE
L LENGTHCOLORCODE
HEADTYPE
D
.040
SIZE
.138-32UNC-3A
38
6
12
8
916
9
58
10
+.00 -.03
±.010 ±.010 ±.02 ±.010 ±.010
Rev. March 2009
MIL-P-7788 PLASTICPANEL MOUNTING HOLE
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
CAPTIVE PAN-L-SCREW
CAPTIVE PAN-L-SCREW, .138-32 X 5/16” LG, STEEL, PHILLIPS DRIVE, LUSTERLESS GRAY PER FED-STD-595 NO. 36492
PART NO. EXAMPLE: =
SECURING EDGE-LIGHTED PANELS
COLORED HEAD, MACHINE THREAD,ALLOY STEEL
CPS 6C 5 D L06GY
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thicknesses. Refer to ASME B18.6.3 Appendix for details.
4. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
5. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for instal-lation into brittle materials.
6. Inventory of all sizes listed in the table and colors listed in the forward section of this catalog are carried in stock to assure prompt deliveries. Lengths not listed are also available on order.
7. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3. Recessed
Head Tapping Screws, Type AB.2. Screws are stocked zinc plated per ASTM B633, Class SC1, Type II.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-7
14
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
4SM 24
6SM
8SM
10SM
20
18
16
PS
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.312
.438
.500
.375
.037.117
.043.158
.046.179
.040.137DSTEEL
PHILLIPS DRIVE
L LENGTH TOL. ±.03
4
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.094
.106
.125
.144
COLORCODE
HEADTYPE
16
16
16
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
6
6
6
6
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, 10-16 X 5/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS GREEN PER FED-STD-595 NO. 24300
COLORED HEAD, SHEET METAL THREAD,STEEL
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PAN-L-SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
PS 10SM 10 D S04GN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation and
removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction from the information display by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening and
heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause prob-lems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the forming
of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the same
quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thicknesses. Refer to ANSI B18.6.4, Appendix VI.
4. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
5. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
6. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
7. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed Head
Tapping Screws, Type AB.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Washer color is achieved by molding with pigmented nylon per ASTM D4066.4. Screw head coating and washer colors are matched to customer requirements.
We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-8
14
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
4SM 24
6SM
8SM
10SM
20
18
16
PS
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.312
.438
.500
.375
.037.117
.043.158
.046.179
.040.137ZRSTEEL
PHILLIPS DRIVE
L LENGTH TOL. ±.03
4
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.094
.106
.125
.144
COLORCODE
HEADTYPE
16
16
16
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
6
6
6
6
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, 10-16 X 5/8” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS GREEN PER FED-STD-595 NO. 24300
COLORED HEAD, SHEET METAL THREAD, STEEL,
RoHS-COMPLIANT ZINC
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PAN-L-SCREW
PS 10SM 10 ZR S04GN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems.
NOTES:1. Torx® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis on the
forming of the Torx® recess to meet design specification.3. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
4. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thickness. Refer to ASME B18.6.3, Appendix for details.
5. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
6. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
7. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
8. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed
Head Tapping Screws, Type AB, except for recess.2. Screws are stocked zinc plated per ASTM B633, Class SC1,Type II.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer color are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-9
14
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
4SM 24
6SM
8SM
10SM
20
18
16
PS
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.312
.438
.500
.375
.037.117
.043.158
.046.179
.040.137DT
STEELTorx®
RECESS
L LENGTH TOL. ±.03
4
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.094
.106
.125
.144
COLORCODE
HEADTYPE
E
T10
T20
T25
T15
16
16
16
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
6
6
6
6
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, 8-18 X 1/2” LG, STEEL, TORX® RECESS, SEMI-GLOSS BEIGE PER FED-STD-595 NO. 27722
COLORED HEAD, SHEET METAL THREAD,STEEL, TORX® RECESS
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PAN-L-SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
PS 8SM 8 DT S15BG
FEATURES:1. The one piece screw and captive washer simplifies handling, installation and
removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction from the information display by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening and
heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause prob-lems.
NOTES:1. Torx® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis on the forming
of the Torx® recess to meet design specification.3. Care should be exercised to assure that the screwdriver tools meet the same
quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
4. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thickness. Refer to ANSI B18.6.4, Appendix VI.
5. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
6. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
7. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
8. For color-coated screw less washer, omit the letter P from the head type code.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed Head
Tapping Screws, Type AB, except for recess.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Washer color is achieved by molding with pigmented nylon per ASTM D4066.4. Screw head coating and washer color are matched to customer requirements.
We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-10
14
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
4SM 24
6SM
8SM
10SM
20
18
16
PS
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A DB
.312
.438
.500
.375
.037.117
.043.158
.046.179
.040.137ZRTSTEELTorx®
RECESS
L LENGTH TOL. ±.03
4
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.094
.106
.125
.144
COLORCODE
HEADTYPE
E
T10
T20
T25
T15
16
16
16
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
6
6
6
6
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, 8-18 X 1/2” LG, STEEL, RoHS ZINC, Torx® RECESS, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26492
COLORED HEAD, SHEET METAL THREAD,STEEL, TORX® RECESS, RoHS-COMPLIANT ZINC
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PAN-L-SCREW
PS 8SM 8 ZRT S06GY
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. The drill point Pan-L-Screw drills a hole, taps, and fastens in steel up to 7/32” thick in one operation. In addition, better thread engagement and a tighter fit to the workpiece is realized since the screw produces the optimum hole size.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These Pan-L-Screws are primarily intended for application in steel up to 7/32” thick or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. For color-coated screw less washer, omit the letter W from the head type code.
SPECIFICATIONS:1. Screws are in accordance with SAE Standard J78-1979, Self-Drilling
Tapping Screws, Type BSD with Style 2 Point.2. Screws are stocked zinc plated per ASTM B633, Class SC1, Type II.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer color are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-11
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
6SMB
8SMB
10SMB
20
18
16
DPSW
6
6
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A CB
.438
.500
.375
.125.158
.156.179
.125.137
DSTEEL
PHILLIPSDRIVE
L LENGTH TOL. ±.016
6
8
10
COLORCODE
HEADTYPE
D
.043
.046
.040
16
16
16
14
14
14
12
12
12
10
10
10
8
8
8
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, DRILL POINT 10-16 X 5/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS GREEN PER FED-STD-595 NO. 24300
COLORED HEAD, SHEET METAL THREAD, STEEL, DRILL POINT
SELF-DRILLING APPLICATIONS
PAN-L-SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
DPSW 10SMB 10 D S04GN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. The drill point Pan-L-Screw drills a hole, taps, and fastens in steel up to 7/32” thick in one operation. In addition, better thread engagement and a tighter fit to the workpiece is realized since the screw produces the optimum hole size.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These Pan-L-Screws are primarily intended for application in steel up to 7/32” thick or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. For color-coated screw less washer, omit the letter W from the head type code.
SPECIFICATIONS:1. Screws are in accordance with SAE Standard J78-1979, Self-Drilling Tap-
ping Screws, Type BSD with Style 2 Point.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer color are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-12
38
12
58
34
78 1CODE PITCHNOMINAL
DIAMETER
THREAD
6SMB
8SMB
10SMB
20
18
16
DPSW
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A CB
.438
.500
.375
.125.158
.156.179
.125.137
ZRSTEEL
PHILLIPSDRIVE
L LENGTH TOL. ±.016
6
8
10
COLORCODE
HEADTYPE
D
.043
.046
.040
16
16
16
14
14
14
12
12
12
10
10
10
8
8
8
6
6
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = PAN-L-SCREW, SHEET METAL, DRILL POINT 10-16 X 5/8” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS GREEN PER FED-STD-595 NO.24300
COLORED HEAD, SHEET METAL THREAD, STEEL, DRILL POINT,
RoHS-COMPLIANT ZINC
SELF-DRILLING APPLICATIONS
PAN-L-SCREW
DPSW 10SMB 10 ZR S04GN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
4. For color-coated screw less washer, order head type code “MSP”.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.7M.2. Screws are alloy steel and are stocked zinc plated in accordance with
ASTM B633, Class SC1, Type II.3. Pan-L-Screws are suitable for applications with temperatures up to 250°F.4. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.5. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-13
MPS
CODE PITCHNOMINALDIAMETER
TOL. ±0,3 TOL. ±0,4 TOL. ±0,5
LENGTHL
8 10 13 16 20 25
THREAD
0,452,525M0,53,03M0,63,535M0,74,04M0,85,05M1,06,06M
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±0,50
A DB
7,0
9,5
11,0
13,0
15,8
8,0
0,862,96
1,023,62
1,094,19
1,164,86
1,456,05
0,943,34D
STEELPHILLIPS
DRIVE
COLOR CODE
HEADTYPE
252525
20202020
161616161616
131313131313
1010101010
8888
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
METRIC PAN-L-SCREW, M5 X 0,8mm THREADS X 10mm LG, ALLOY STEEL, PHILLIPS DRIVE, SEMI-GLOSS BROWN PERFED-STD-595 NO. 20140
METRIC PAN-L-SCREW
DIMENSIONS ARE IN mmSECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
COLORED HEAD, METRIC THREAD,ALLOY STEEL
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
MPS 5M 10 D S11BN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus elimi-nates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
4. For color-coated screw less washer, order head type code “MSP”.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.6.7M.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant. 3. Pan-L-Screws are suitable for applications with temperatures up to 250°F.4. Washer color is achieved by molding with pigmented nylon per ASTM
D4066. 5. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-14
MPS
CODE PITCHNOMINALDIAMETER
TOL. ±0,3 TOL. ±0,4 TOL. ±0,5
LENGTHL
8 10 13 16 20 25
25
THREAD
0,452,525M0,53,03M0,63,535M0,74,04M0,85,05M1,06,06M
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±0,50
A DB
7,0
9,5
11,0
13,0
15,8
8,0
0,862,96
1,023,62
1,094,19
1,164,86
1,456,05
0,943,34ZR
STEELPHILLIPS
DRIVE
COLOR CODE
HEADTYPE
2525
20202020
161616161616
131313131313
10101010
8888
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
METRIC PAN-L-SCREW, M4 X 0,7 THREADS X 13mm LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26314
METRIC PAN-L-SCREW
DIMENSIONS ARE IN mmSECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
COLORED HEAD, METRIC THREAD,ALLOY STEEL, RoHS-COMPLIANT ZINC
MPS 4M 13 ZR S27GY
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus elimi-nates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
4. For color-coated screw less washer, order head type code “MSP”.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.7M.2. Screws are 300 series corrosion resistant steel and are stocked passiv-
ated. 3. Pan-L-Screws are suitable for applications with temperatures up to 250°F.4. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.5. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 2-15
MPS
CODE PITCHNOMINALDIAMETER
TOL. ±0,3 TOL. ±0,4 TOL. ±0,5
LENGTHL
8 10 13 16 20 25
THREAD
0,452,525M0,53,03M0,63,535M0,74,04M0,85,05M1,06,06M
MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±0,50
A DB
7,0
9,5
11,0
13,0
15,8
8,0
0,862,96
1,023,62
1,094,19
1,164,86
1,456,05
0,943,34
COLOR CODE
HEADTYPE
252525
20202020
161616161616
131313131313
1010101010
8888
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
METRIC PAN-L-SCREW, M5 X 0,8mm THREADS X 10mm LG, CORROSION RESISTANT STEEL, PHILLIPS DRIVE, SEMI-GLOSS BROWN PER FED-STD-595 NO. 20140
METRIC PAN-L-SCREW
DIMENSIONS ARE IN mmSECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
COLORED HEAD, METRIC THREAD,CRES, RoHS-COMPLIANT
MPS 5M 10 CP S11BN
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus elimi-nates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Torx® recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
4. For color-coated screw less washer, order head type code “MSP”.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.7M, except for
the Torx® recess.
2. Screws are 300 series corrosion resistant steel and are stocked passiv-ated.
3. Pan-L-Screws are suitable for applications with temperatures up to 250°F.4. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.5. Screw head coating and washer colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 01-2016 2-16
MPS
CODE PITCHNOMINALDIAMETER
TOL. ±0,3 TOL. ±0,4 TOL. ±0,5
LENGTHL
8 10 13 16 20 25
THREAD
0,63,535M0,74,04M0,85,05M1,06,06M
MATERIAL
CTCRES
TORX® RECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±0,50
A DB
9,5
11,0
13,0
15,8
1,023,62
1,094,19
1,164,86
1,456,05
COLOR CODE
HEADTYPE
252525
20202020
16161616
13131313
101010
88
E
T15
T20
T25
T30
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
METRIC PAN-L-SCREW, M5 X 0,8mm THREADS X 10mm LG, CORROSION RESISTANT STEEL, TORX® RECESS, LUSTER-LESS GRAY PER FED-STD-595 NO. 36270
METRIC PAN-L-SCREW
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
COLORED HEAD, METRIC THREAD,CRES, TORX® RECESS, RoHS-COMPLIANT
DIMENSIONS ARE IN mm
MPS 5M 10 CT L46GY
Screws With Captive Washer, Color-MatchedThis series of screws offers many of the same features as PAN-L-SCREWS and is intended for applications requiring both flush-mounted hardware and a low profile washer. Such applications include attaching hollow-core honeycomb colored panels in the crew station and interior of aircraft, attaching fabric-covered interior panels such as those found in aircraft interiors, special-purpose vehicles, and similar applications.
3-0 Stake Fastener Company www.stakefastener.com
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction from the information display by blending with the background.3. Screw heads are formed by cold forging, followed by a heat treating process
which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
5. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
6. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with emphasis on the
forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. Inventory of all sizes listed in the table and colors listed in the forward sec-tion of this catalog are carried in stock to assure prompt deliveries.
SPECIFICATIONS:1. Screws with Material code “D” meet all requirements of NAS600 series,
including thread size .086-56 which is not listed as part of the NAS specifi-cation. Screws covered on this document with other than Material code “D” meet all requirements of NAS600 series, except for plating requirements.
2. Plating: Code “D”: cadmium plated in accordance with QQ-P-416, Type II, Class 2.3. Threads are in conformance with MIL-S-8879 and H-28 Federal Handbook
for threads, except parts with thread code “2C” which are in accordance with MIL-S-7742.
4. Screw lengths are expressed in code for 1/16-inch increments. Lengths not listed in above table may be specified. Contact factory to determine availability.
5. These screw/washer assemblies are suitable for applications with tempera-tures up to 250°F.
6. Washer color is achieved by molding with pigmented nylon per ASTM D4066.
7. Screw head coating and washer colors are matched to customer require-ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-1
THREAD
CODE SIZE
.086-56UNC-3A
.112-40UNJC-3A
.138-32UNJC-3A
2C
4C
6C
38
716
L LENGTH TOLERANCE +.00 -.03
+.00 -.06
12
916
58
34
78 1 1
21MATERIAL
DALLOY STEEL
CADMIUM PLATEDPHILLIPS DRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIMENSIONAL DATA
A
.167
.155
COLORCODE
HEADTYPE
.219
.205
.270
.256
B
.062
.053
.080
.070
.097
.087
C
.198
.168
.250
.220
.300
.270
D
.039
.029
.042
.032
.045
.035SCFW.164-32
UNJC-3A8C .322.306
.115
.105.352.322
.048
.038
141
.190-32UNJF-3A10F .373
.357.133.122
.403
.373.051.04124
24
20
20
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
9
9
9
9
8
8
8
8
8
7
7
7
7
7
6
6
6
6
6
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
SCREW / FLAT WASHERCOLORED PAN HEAD w/CAPTIVE NYLON
FLAT WASHER, MACHINE THREAD, ALLOY STEEL
PART NO. EXAMPLE: =PAN HEAD SCREW w/CAPTIVE NYLON FLAT WASHER, .138-32 X 3/4” LG, STEEL, PHILLIPS DRIVE, BLUE PER FED-STD-595 NO. 25414
SECURING INSTRUMENTS WITHLIMITED SPACE TO DASH PANELS
SCFW 6C 12 D S04BL
FEATURES:1. The one piece screw and captive washer simplifies handling,
installation and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
5. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
6. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws meet all requirements of NAS600 series except for
plating (see spec #2), including thread size .086-56 which is not listed as part of the NAS specification.
2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.
3. Threads are in conformance with MIL-S-8879 and H-28 Federal Handbook for threads.
4. These screw/washer assemblies are suitable for applications with temperatures up to 250°F.
5. Washer color is achieved by molding with pigmented nylon per ASTM D4066.
6. Screw head coating and washer colors are matched to cus-tomer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-2
THREAD
CODE SIZE
.086-56UNC-3A
.112-40UNJC-3A
.138-32UNJC-3A
2C
4C
6C
38
716
L LENGTH +.00 -.03
+.00 -.06
12
916
58
34
78 1
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIMENSIONAL DATA
A
.167
.155
COLORCODE
HEADTYPE
.219
.205
.270
.256
B
.062
.053
.080
.070
.097
.087
C
.198
.168
.250
.220
.300
.270
D
.039
.029
.042
.032
.045
.035
SCFWZRSTEEL
PHILLIPSDRIVE
141
2016
16
14
14
12
12
10
10
9
9
8
8
8
7
7
7
6
6
6
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
SCREW / FLAT WASHERCOLORED PAN HEAD w/CAPTIVE NYLON
FLAT WASHER, MACHINE THREAD, ALLOY STEEL, RoHS-COMPLIANT ZINC
PART NO. EXAMPLE: =PAN HEAD SCREW w/CAPTIVE NYLON FLAT WASHER, .138-32 X 3/4” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS BEIGE PER FED-STD-595 NO. 23522
SECURING INSTRUMENTS WITHLIMITED SPACE TO DASH PANELS
SCFW 6C 12 ZR S09BG
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction from the information display by blending with the background.3. Screw heads are formed by cold forging which increases the basic tensile
strength of the corrosion resistant steel by 25%. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coat-ing material.
4. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
5. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.
6. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.
NOTES:1. The screws listed in this series reflect aircraft quality with emphasis on the
forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the
same quality and design specifi cation in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. Inventory of all sizes listed in the table and colors listed in the forward section of this catalog are carried in stock to assure prompt deliveries. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are corrosion resistant steel (CRES) and meet all requirements of
MS51957 (UNC-2A) and MS51958 (UNF-2A).2. Screws are stocked passivated per SAE-AMS-2700.3. Threads are in conformance with MIL-S-7742 and H-28 Federal Handbook
for threads.4. Screw lengths are expressed in code for 1/16-inch increments. Lengths
not listed in above table may be specified, however, contact factory to determine availability.
5. Washer color is achieved by molding with pigmented nylon per ASTM D4066. Natural (translucent) washer is furnished with polished head screw.
6. Screw head coating and washer colors are matched to customer require-ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-3
THREAD
CODE SIZE
.086-56UNC-2A
.112-40UNC-2A
.138-32UNC-2A
2C
4C
6C
38
716
L LENGTH TOLERANCE +.00 -.03
+.00 -.06
12
916
58
34
78 1 1
21MATERIAL
CPCRES
PHILLIPS DRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIMENSIONAL DATA
A
.167
.155
COLORCODE
HEADTYPE
.219
.205
.270
.256
B
.062
.053
.080
.070
.097
.087
C
.198
.168
.250
.220
.300
.270
D
.039
.029
.042
.032
.045
.035SCFW.164-32UNC-2A8C .322
.306.115.105
.352
.322.048.038
141
.190-24UNC-2A10C .373
.357.133.122
.403
.373.051.041
.190-32UNF-2A10F .373
.357.133.122
.403
.373.051.041
6
6
6
6
6
6
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
9
10
10
10
10
10
12
12
12
12
12
14
14
14
14
14
16
16
16
16
16
20
20
20
20
24
24
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =PAN HEAD SCREW w/CAPTIVE NYLON FLAT WASHER, .138-32 X 3/4” LG, COR. RES. STEEL, PHILLIPS DRIVE, SEMI-GLOSS BROWN PER FED-STD-595 NO. 20372
SCREW / FLAT WASHERCOLORED PAN HEAD w/CAPTIVE NYLON
FLAT WASHER, MACHINE THREAD, CRES, RoHS-COMPLIANT
SECURING INSTRUMENTS WITHLIMITED SPACE TO DASH PANELS
SCFW 6C 12 CP S05BN
FEATURES:1. Screws are furnished with captive nylon sealing washer. When
installed in recommended clearance hole this assembly provides a liquid-tight seal.
2. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
3. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.
4. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws with material code CP meet all requirements of
MS24693. Material is 300 series corrosion resistant steel. Screws are passivated per SAE-AMS-2700. Screws of this material have a class 2A thread fit per FED-STD-H28/2.
2. Screws with material code D meet all requirements of NAS514. Screws are stocked cadmium plated per QQ-P-416, Type II, Class 2. Screws of this material have a class 3A thread fit per MIL-S-8879.
3. Washer color matches screw head color and is achieved by molding with pigmented nylon per ASTM D4066.
4. Coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
5. For an assembly with uncoated screw and natural colored sealing washer, order color code N02NA.
REV 06-2014 3-4
DIMENSIONAL DATA
A
.385
D
.391
E
.201
F
.040
78 1
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
L LENGTH +.00 -.03
12
58
34CODE SIZE
.190-32UNF10F
HEADTYPE
FHW
38
716
CPCRES
PHILLIPSDRIVE
DSTEEL
PHILLIPSDRIVE
THREAD(SEE SPECIFICATION FOR
CLASS OF THREAD FIT)
SHARP
7 12 14 168 106
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2014 DUPREE, INC.
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
PART NO. EXAMPLE: = 100° FLAT HEAD SCREW w/CAPTIVE NYLON SEALING WASHER, .190-32 X 7/16” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS WHITE PER FED-STD-595 NO. 27875
SEALING SCREWCOLORED 100° FLAT HEAD
w/CAPTIVE NYLON WASHER,MACHINE THREAD, ALLOY STEEL
& CRES
SECURING PANELS WHERE A LIQUID-TIGHT SEAL IS DESIRED.
TYPICAL APPLICATION:
FHW 10F 7 D S01WH
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening and
heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
4. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
5. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.6.4,
Recessed Head Tapping Screws, Type AB.2. Screws are stocked zinc plated per ASTM B633, Class SC1, Type II.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-5
OHCW
HEADTYPE
CODE PITCHNOMINALDIAMETER
THREAD
4SM 244
14
12
58
34 1
4 8 10 12
L LENGTH TOL.±.03
16
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
A CB
.300 .272.025D
STEELPHILLIPS
DRIVE
COLORCODE
D
.089
38
6
DIM DATA±.020
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW w/CAPTIVE NYLON WASHER, SHEET METAL, 4-24 X 5/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 26555
UPHOLSTERY SCREWCOLORED 82° OVAL HEAD
w/CAPTIVE NYLON WASHER,SHEET METAL THREAD, STEEL
SECURING UPHOLSTERY-COVEREDPANELS
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
OHCW 4SM 10 D S01YE
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening
and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
4. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
5. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed
Head Tapping Screws, Type AB.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-6
OHCW
HEADTYPE
CODE PITCHNOMINALDIAMETER
THREAD
4SM 244
14
12
58
34 1
4 8 10 12
L LENGTH TOL.±.03
16
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
A CB
.300 .272.025ZR
STEELPHILLIPS
DRIVE
COLORCODE
D
.089
38
6
DIM DATA±.020
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW w/CAPTIVE NYLON WASHER, SHEET METAL, 4-24 X 5/8” LG, STEEL, RoHS ZINC, PHIL-LIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 26555
UPHOLSTERY SCREWCOLORED 82° OVAL HEAD
w/CAPTIVE NYLON WASHER,SHEET METAL THREAD, STEEL,
RoHS-COMPLIANT ZINC
SECURING UPHOLSTERY-COVEREDPANELS
OHCW 4SM 10 ZR S01YE
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening
and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
4. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
5. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed
Head Tapping Screws, Type AB.2. Screws are stocked zinc plated per ASTM B633, Class SC1, Type II.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-7
OHCWL
HEADTYPE
CODE PITCHNOMINALDIAMETER
THREAD
4SM 244
14
12
L LENGTH
38
58
34 1
TOL.±.03
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
A CB
.360 .272.025D
STEELPHILLIPS
DRIVE
COLORCODE
D
.089
DIM DATA±.020
4 8 10 12 166
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW w/CAPTIVE LARGE O.D. NYLON WASHER, SHEET METAL, 4-24 X 3/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26622
UPHOLSTERY SCREWCOLORED 82° OVAL HEAD
w/CAPTIVE LARGE O.D. NYLON WASHER, SHEET METAL THREAD, STEEL
SECURING UPHOLSTERY-COVEREDPANELS
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
OHCWL 4SM 6 D S42GY
FEATURES:1. The one piece screw and captive washer simplifies handling, installation
and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface eliminates
distraction by blending with the background.3. Screw heads are formed by cold forging, followed by a case hardening
and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.
6. A self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.
7. A seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.
8. Type ‘AB’ thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the
forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
4. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.
5. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3, Recessed
Head Tapping Screws, Type AB.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type VI-yellow,
hexavalent chromium free, RoHS-Compliant.3. Washer color is achieved by molding with pigmented nylon per ASTM
D4066.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-8
OHCWL
HEADTYPE
CODE PITCHNOMINALDIAMETER
THREAD
4SM 244
14
12
L LENGTH
38
58
34 1
TOL.±.03
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
A CB
.360 .272.025ZR
STEELPHILLIPS
DRIVE
COLORCODE
D
.089
DIM DATA±.020
4 8 10 12 166
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW w/CAPTIVE LARGE O.D. NYLON WASHER, SHEET METAL, 4-24 X 3/8” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26622
UPHOLSTERY SCREWCOLORED 82° OVAL HEAD
w/CAPTIVE LARGE O.D. NYLON WASHER, SHEET METAL THREAD, STEEL,
RoHS-COMPLIANT ZINC
SECURING UPHOLSTERY-COVEREDPANELS
OHCWL 4SM 6 ZR S42GY
FEATURES:1. The one piece screw and captive washer simplifies han-
dling, installation and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting
surface eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in
order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screw material is heat treated alloy steel. Washer
material is low carbon steel.2. Screws are stocked cadmium plated per QQ-P-416, Type
II, Class 2.3. Threads are in conformance with MIL-S-7742 and H-28
Federal Handbook for threads.4. Screw head coating and washer colors are matched
to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-9
A
.50
.56
.66
B
.18
.21
.23
C
.30
.36
.41
D
.13
.14
.15
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
MATERIAL
DSTEEL
PHILLIPSDRIVE
LENGTH TOLERANCE +.00 -.03
1
THREAD
CODE SIZE
.138-32UNC-3A
.164-32UNC-3A
.190-32UNF-3A
6C
8C
10F
LHEADTYPE
FCM
58
34
78
38
716
12
14
516
DIM DATA±.02
16
16
16
14
14
14
12
12
12
10
10
10
8
8
8
7
7
7
6
6
6
5
5
5
4
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =100° FLAT HEAD SCREW w/CAPTIVE METAL WASHER, .190-32 X 5/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS RED PER FED-STD-595 NO. 21105
SCREW / METAL WASHERCOLORED 100° FLAT HEAD w/CAPTIVE METAL WASHER, MACHINE THREAD,
ALLOY STEEL
SECURING COMPOSITE PANELS
FCM 10F 10 D S03RD
FEATURES:1. The one piece screw and captive washer simplifies han-
dling, installation and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting
surface eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic ten-sile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in
order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screw material is heat treated alloy steel. Washer
material is low carbon steel.2. Screws are zinc plated per ASTM B633, Class SC1
(min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.
3. Threads are in conformance with MIL-S-7742 and H-28 Federal Handbook for threads.
4. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-10
A
.50
.56
.66
B
.18
.21
.23
C
.30
.36
.41
D
.13
.14
.15
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
MATERIAL
ZRSTEEL
PHILLIPSDRIVE
LENGTH +.00 -.03
1
THREAD
CODE SIZE
.138-32UNC-3A
.164-32UNC-3A
.190-32UNF-3A
6C
8C
10F
LHEADTYPE
FCM
58
34
78
38
716
12
14
516
DIM DATA±.02
16
16
16
14
14
14
12
12
12
10
10
10
8
8
8
7
7
7
6
6
6
5
5
5
4
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =100° FLAT HEAD SCREW w/CAPTIVE METAL WASHER, .190-32 X 5/8” LG, ALLOY STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS RED PER FED-STD-595 NO. 21105
SCREW / METAL WASHERCOLORED 100° FLAT HEAD w/CAPTIVE METAL WASHER, MACHINE THREAD,
ALLOY STEEL, RoHS-COMPLIANT ZINC
SECURING COMPOSITE PANELS
FCM 10F 10 ZR S03RD
FEATURES:1. The one piece screw and captive washer simplifies handling,
installation and removal of attachment hardware.2. Attachment hardware, color-matched with the mounting surface
eliminates distraction from the information display by blending with the background.
3. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
4. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
5. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.
NOTES:1. The screws listed in this series reflect aircraft quality with empha-
sis on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screw and washer material is 300 series corrosion resistant steel
(Cres).2. Screws and washers are passivated per SAE-AMS-2700.3. Threads are in conformance with H-28 Federal Handbook for
threads.4. Screw head coating and washer colors are matched to customer
requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 3-11
MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE A
.75
B
.23
C
.41
D
.15
TOLERANCE +.00 -.03
1
16
58
34
78
10 12 14
12
8
LENGTHTHREAD
CODE SIZE
.190-32UNF-2A10F
LHEADTYPE
FCM
38
716
6 7
14
516
4 5
DIM DATA±.02
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =100° FLAT HEAD SCREW w/CAPTIVE METAL WASHER, .190-32 X 7/8” LG, COR. RES. STEEL, PHILLIPS DRIVE, SEMI-GLOSS BROWN PER FED-STD-595 NO. 20122
SCREW / CAPTIVE METAL WASHERCOLORED 100° FLAT HEAD w/CAPTIVE
METAL LG O.D. WASHER, MACHINE THREAD, CRES, RoHS-COMPLIANT
SECURING COMPOSITE PANELS
FCM 10F 14 CP S13BN
Stake Fastener Co. offers industry standard fasteners with color-coated heads. This series of screws, including flat head, oval head and button head, combine the same features of high tensile strength material with the durable thermosetting coating material and colors as used for PAN-L-SCREWS. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screw driver damage. This feature virtually eliminates the need for touch up painting after assembly.
Decorative Color-Coated Screws
4-0 Stake Fastener Company www.stakefastener.com
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in 1/16-inch increments (for example, length code 8 = 1/2-inch long screw).
SPECIFICATIONS:1. Screws meet the requirements of NAS600 series, including
thread size .086-56 and .216-24 which are not listed as part of the NAS specification, except for plating requirements.
2. Plating: Zinc plate IAW ASTM B633, Class SC1, Type VI-yellow, hexavalent chromium free, RoHS-compliant.
3. Threads are in conformance with MIL-S-8879, except parts with thread codes “2C” & “12C” which are IAW MIL-S-7742.
4. Thermosetting coating material is applied to screw head only, threads are free of coating.
5. Screw head coating colors are matched to customer require-ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-1
S
THREAD
CODE SIZE
.086-56UNC-3A.112-40
UNJC-3A.138-32
UNJC-3A.164-32
UNJC-3A.190-32
UNJF-3A.216-24UNC-3A.250-28
UNJF-3A
2C4C6C8C10F12C
14F
316
14
516
38
716
L LENGTH +.00 -.03
+.00 -.06
12
916
58
34
1116
78 1 1
418 11
20
MATERIAL
ZR
ALLOY STEEL
PHILLIPSDRIVE
RoHS-COMPLIANTZINC PLATE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A B
.167
.492
.270
.322
.373
.425
.219
.162.473
.053.155
.087.256
.105.306
.122.357
.139.407
.070.205
COLORCODE
HEADTYPE
MAX MIN MAX MIN
.175
.062
.097
.115
.133
.151
.080
2020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN HEAD SCREW, .190-32 X 5/8” LG, ALLOY STEEL, RoHS-ZINC PLT, PHIL-LIPS DRIVE, LUSTERLESS BROWN PER FED-STD-595 NO. 30140 PART NO. EXAMPLE: =
COLORED SCREWPAN HEAD, MACHINE THREAD,
ALLOY STEEL, RoHS-COMPLIANT ZINC
S 10F 10 ZR L11BN
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in 1/16-inch increments (for example, length code 8 = 1/2-inch long screw).
SPECIFICATIONS:1. Screws meet the requirements of NAS600 series, including
thread size .086-56 and .216-24 which are not listed as part of the NAS specification, except for plating requirements.
2. Screws are cadmium plated per QQ-P-416, Type II, Class 2.3. Threads are in conformance with MIL-S-8879, except parts with
thread codes “2C” & “12C” which are IAW MIL-S-7742.4. Thermosetting coating material is applied to screw head only,
threads are free of coating.5. Screw head coating colors are matched to customer require-
ments. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 03-2015 4-2
S
THREAD
CODE SIZE
.086-56UNC-3A.112-40
UNJC-3A.138-32
UNJC-3A.164-32
UNJC-3A.190-32
UNJF-3A.216-24UNC-3A.250-28
UNJF-3A
2C4C6C8C10F12C
14F
316
14
516
38
716
L LENGTH +.00 -.03
+.00 -.06
12
916
58
34
1116
78 1 1
418 11
20
MATERIAL
D
ALLOY STEEL
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA±.020
A B
.167
.492
.270
.322
.373
.425
.219
.162.473
.053.155
.087.256
.105.306
.122.357
.139.407
.070.205
COLORCODE
HEADTYPE
MAX MIN MAX MIN
.175
.062
.097
.115
.133
.151
.080
2020
181818
161616161616
141414141414
121212121212
111111111111
101010101010
999999
8888888
777777
66666
55555
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN HEAD SCREW, .190-32 X 5/8” LG, ALLOY STEEL, CADMIUM PLT, PHILLIPS DRIVE, LUSTERLESS BROWN PER FED-STD-595 NO. 30140 PART NO. EXAMPLE: =
COLORED SCREWPAN HEAD, MACHINE THREAD,
ALLOY STEEL
S 10F 10 D L11BN
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for pro-duction. Lengths not listed are also available on order. Length code designates nominal length in 1/16-inch increments (for example, length code 8 = 1/2-inch long screw).
SPECIFICATIONS:1. Screws meet all requirements of MS51957 (UNC-2A) and
MS51958 (UNF-2A).2. Screws are stocked passivated per SAE-AMS2700.3. Threads are in conformance with H-28 Federal Handbook for
threads.4. Thermosetting coating material is applied to screw head only,
threads are free of coating.5. Screw head coating colors are matched to customer requirements.
We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-3
S
THREAD
CODE SIZE
.086-56UNC-2A.112-40UNC-2A.138-32UNC-2A.164-32UNC-2A.190-32UNC-2A.190-32UNC-2A.250-28UNC-2A
316
14
516
38
716
L LENGTH +.00 -.03
+.00 -.06
12
58
34
78 1 1
214 11
MATERIAL
CP
CRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA
A B
.167
.492
.270
.322
.373
.373
.219
.162.473
.053.155
.087.256
.105.306
.122.357
.122.357
.070.205
COLORCODE
HEADTYPE
MAX MIN MAX MIN
.175
.062
.097
.115
.133
.133
.080
242424
2020202020
16161616161616
14141414141414
12121212121212
10101010101010
8888888
777777
666666
555555
444444
33332C
4C6C8C10C10F
14F
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PAN HEAD SCREW, .190-32 X 1/2” LG, CORROSION RESISTANT STEEL, PHILLIPS DRIVE, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26132 PART NO. EXAMPLE: =
PAN HEAD, MACHINE THREAD,CORROSION RESISTANT STEEL,
RoHS-COMPLIANT
COLORED SCREW
S 10F 8 CP S17GY
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burr-ing and yield of the substrate under the coating material.
NOTES:1. The screws listed in this series reflect high quality with
emphasis on the forming of the hexagon socket to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.3,
Socket Button Head Cap Screws.2. Screws are alloy steel and are stocked zinc plated in accor-
dance with ASTM B633, Class SC1, Type II.3. Threads are in conformance with H-28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-4
BHCS
THREAD
CODE SIZE
.086-56UNRC-3A.112-40
UNRC-3A.138-32
UNRC-3A.164-32
UNRC-3A.190-32
UNRF-3A.250-20
UNRC-3A.375-16
UNRC-3A
2C4C6C8C10F14C38C
316
14
38
12
58
78
34 1
L LENGTH +.00 -.03
HEAD DATA
A BMATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
8 .164
.199.656
.046
.262 .073
.312 .087
.361 .101
.437 .132
.213 .059
COLORCODE
HEADTYPE
DSTEEL
HEXAGONSOCKET
MAX. MAX.
161616
141414
12121212
1010101010
888888
6666666
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =BUTTON HEAD SCREW, 10-32 X 5/8” LG, STEEL, HEXAGON SOCKET, SEMI-GLOSS BLUE PER FED-STD-595 NO. 25488
BUTTON HEAD, MACHINE THREAD, ALLOY STEEL
COLORED SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
BHCS 10F 10 D S17BL
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burr-ing and yield of the substrate under the coating material.
NOTES:1. The screws listed in this series reflect high quality with
emphasis on the forming of the hexagon socket to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.3,
Socket Button Head Cap Screws.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type
VI-yellow, hexavalent chromium free, RoHS-Compliant.3. Threads are in conformance with H-28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We rec-
ommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-5
BHCS
THREAD
CODE SIZE
.086-56UNRC-3A.112-40
UNRC-3A.138-32
UNRC-3A.164-32
UNRC-3A.190-32
UNRF-3A.250-20
UNRC-3A.375-16
UNRC-3A
316
14
38
12
58
78
34 1
L LENGTH +.00 -.03
HEAD DATA
A BMATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
.164
.199.656
.046
.262 .073
.312 .087
.361 .101
.437 .132
.213 .059
COLORCODE
HEADTYPE
ZRSTEEL
HEXAGONSOCKET
RoHS COMPLI-ANT ZINC
PLATE
MAX. MAX.
2C4C6C8C10F14C38C 16
1616
141414
12121212
1010101010
8888888
6666666
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = BUTTON HEAD SCREW, 10-32 X 1/2” LG, STEEL, RoHS ZINC, HEXAGON SOCKET, SEMI-GLOSS BLUE PER FED-STD-595 NO. 25526
BUTTON HEAD, MACHINE THREAD, ALLOY STEEL, RoHS-COMPLIANT ZINC
COLORED SCREW
BHCS 6C 8 ZR S03BL
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
NOTES:1. The screws listed in this series reflect high quality with
emphasis on the forming of the hexagon socket to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No. B18.3,
Socket Button Head Cap Screws.2. Screws are 300 series corrosion resistant steel and are stocked
passivated per SAE-AMS-2700.3. Threads are in conformance with H-28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-6
BHCS
THREAD
CODE SIZE
.086-56UNRC-3A.112-40
UNRC-3A.138-32
UNRC-3A.164-32
UNRC-3A.190-32
UNRF-3A.250-20
UNRC-3A.375-16
UNRC-3A
2C4C6C8C10F14C38C
316
14
38
12
58
78
34 1
L LENGTH +.00 -.03
HEAD DATA
A BMATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
8 .164
.199.656
.046
.262 .073
.312 .087
.361 .101
.437 .132
.213 .059
COLORCODE
HEADTYPE
CCRES
HEXAGONSOCKET
MAX. MAX.
161616
141414
12121212
1010101010
888888
6666666
44444
3333
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = BUTTON HEAD SCREW, 10-32 X 5/8” LG, CORROSION RESISTANT STEEL, HEXAGON SOCKET, SEMI-GLOSS BLUE PER FED-STD-595 NO. 25488
COLORED BUTTON HEAD, MACHINE THREAD, CRES,
RoHS-COMPLIANT
COLORED SCREW
BHCS 10F 10 C S17BL
DESIGNATES RECESS TYPE & PART LENGTH
“R” DESIGNATES CRUCIFORMRECESSED HEAD SCREWS
SEE TABLE 1 FOR AVAILABLE LENGTHS
TYPICAL APPLICATION:
REV 06-2014 4-7.1
WH
THREAD
CODE SIZE
.164-36UNF-3A.164-32UNC-3A.190-32UNF-3A.250-28UNF-3A
8
832
10
416
RECESS / LENGTH CODE
DIM DATASEE NASM525
A DBMATERIAL
ALLOY STEELPER NASM525
SEE STOCKCOLOR
LISTDoc No.
SCL870115
.375 .164.312
.437 .190.375
.500 .250.437
.375 .164.312D
H
.101
.094
.087
.087
COLORCODE
HEADTYPE
TABLE 1: AVAILABLE DIAMETERS & LENGTHSDASH NUMBERS FOR CRUCIFORM RECESSED HEAD SCREWS
2 1-19/32 8R32 832R32 10R32 416R321-7/81-3/41-5/8
1-3/81-1/41-1/8
17/83/4
11/165/8
9/161/2
7/163/8
1-15/321-11/321-7/321-3/3231/3227/3223/3219/3215/3211/329/327/325/321/8
1-1/2
1/161/32
8R2085288R268R248R228R208R188R168R148R128R118R108R98R88R78R6
832R30832R28832R26832R24832R22832R20832R18832R16832R14832R12832R11832R10832R9832R8832R7832R6
10R3010R2810R2610R2410R2210R2010R1810R1610R1410R1210R1110R1010R910R810R710R6
416R30416R28416R26416R24416R22416R20416R18416R16416R14416R12416R11416R10416R9416R8416R7416R6
“L”LENGTH
± 1/32
“G”GRIP .164-36UNF-3A
(#8-36)
.164-32UNC-3A
(#8-32)
.190-32UNF-3A
(#10-32)
.250-28UNF-3A
(1/4-28)
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
WASHER HEAD, MACHINE THREAD,ALLOY STEEL, PLATED
(SHEET 1 OF 2)
WASHER HEAD SCREW, .190-32 UNF-3A X 5/8” LG, 7/32” GRIP, ALLOY STEEL, CRUCIFORM RECESS, SEMI-GLOSS BEIGE PER FED-STD-595 NO. 27722
SECURING PANELS AND RACK MOUNTED EQUIPMENT
PART NO. EXAMPLE: =
COLORED SCREW
WH 10 R10 D S15BG
FEATURES:1. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.
NOTES:1. The screws listed in this series reflect high quality with emphasis on the forming of the cruciform recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.3. The thread diameters and lengths listed in the table are NASM525 standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.
SPECIFICATIONS:1. Screws meet all requirements of NASM525.2. Screw material is alloy steel per NASM525.3. Screws are cadmium plated per AMS-QQ-P-416, Type II, Class 3 or zinc plated per ASTM B633, Fe/Zn 13, Type II, as per NASM525.4. Threads are in conformance with FED-STD-H28/2, Federal Handbook for threads.5. Thermosetting coating material is applied to screw head only. Threads are free of coating.6. Screw head coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.7. Previous to NASM525, Revision 2 (released 30-JUN-2010), the nominal length (“L” dimension) did not include the end chamfer. Part inventory manufactured to previous revisions may be procured and used until stock is depleted. For further details, refer to Stake Fastener Co. dwg no. 9-83-0401-105.
REV 06-2014 4-7.2
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.WASHER HEAD, MACHINE THREAD,
ALLOY STEEL, PLATED(SHEET 2 OF 2)
COLORED SCREW
FEATURES:1. Screws are furnished with pre-colored heads to match
panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws meet all requirements of NAS514. Screws are
stocked cadmium plated per QQ-P-416, Type II. Class 2.2. Threads are in conformance with MIL-S-8879 and H28
Federal Handbook for threads.3. Coating colors are matched to customer requirements.
We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-fur-nished color chips or samples.
REV 06-2014 4-8
A
.225
.279
.332
.385
A’
.183
.233
.282
.332
B
.045
.057
.068
.080
C
.012
.014
.015
.016
78 1
MATERIAL
DSTEEL
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
16
14
516
L LENGTH +.00 -.03
4 5
12
8
58
34
4 5 8
4 5 8
4 5 8
THREAD
CODE SIZE
.112-40UNJC-3A
.138-32UNJC-3A
.164-32UNJC-3A
.190-32UNJF-3A
4C
6C
8C
10F
HEADTYPE
FH
38
716
6 7
6 7
6 7
6 7
SHARP ABS. MIN.
DIMENSIONAL DATA
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
100° FLAT HEAD SCREW, .190-32 X 5/8” LG, STEEL, PHILLIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 26555 PART NO. EXAMPLE: =
100° FLAT HEAD, MACHINE THREAD, ALLOY STEEL,
PLATED
COLORED SCREW
FH 10F 10 D S01YE
FEATURES:1. Screws are furnished with pre-colored heads to match
panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic ten-sile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in
order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws meet all requirements of NAS514 series except
for plating (see spec #2).2. Screws are zinc plated per ASTM B633, Class SC1
(min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.
3. Threads are in conformance with MIL-S-8879 and H28 Federal Handbook for threads.
4. Coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-fur-nished color chips or samples.
REV 06-2014 4-9
A
.225
.279
.332
.385
A’
.183
.233
.282
.332
B
.045
.057
.068
.080
C
.012
.014
.015
.016
78 1
MATERIAL
ZRSTEEL
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE1
45
16
L LENGTH +.00 -.03
12
58
34
THREAD
CODE SIZE
.112-40UNJC-3A
.138-32UNJC-3A
.164-32UNJC-3A
.190-32UNJF-3A
4C
6C
8C
10F
HEADTYPE
FH
38
716
SHARP ABS. MIN.
DIMENSIONAL DATA
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
7
7
7
7
6
6
6
6
5
5
5
5
4
4
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
100° FLAT HEAD SCREW, .190-32 X 3/8” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, SEMI-GLOSS YELLOW PER FED-STD-595 NO. 26555
PART NO. EXAMPLE: =
100° FLAT HEAD, MACHINE THREAD, ALLOY STEEL,
RoHS-COMPLIANT ZINC
COLORED SCREW
FH 10F 6 ZR S01YE
FEATURES:1. Screws are furnished with pre-colored heads to match
panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in
order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws meet all requirements of MS24693. Material
is 300 series corrosion resistant steel. Screws are passivated per SAE-AMS-2700.
2. Threads are in conformance with H28 Federal Handbook for threads.
3. Coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-fur-nished color chips or samples.
REV 06-2014 4-10
THREAD
CODE SIZE
.112-40UNC-2A
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
4C
6C
8C
10F
HEADTYPE
FH
78 1
16
16
16
16
14
516
L LENGTH +.00 -.03
4 5
12
8
58
34
4 5 8
4 5 8
4 5 8
38
716
6 7
6 7
6 7
6 7
DIMENSIONAL DATA
A
.225
.279
.332
.385
A’
.191
.238
.285
.333
B
.045
.057
.068
.080
C
.012
.014
.015
.016
MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
SHARP ABS. MIN.
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =100° FLAT HEAD SCREW .190-32 X 5/8” LG,CORROSION RESISTANT STEEL, PHILLIPS DRIVE, GLOSS BLUE PER FED-STD-595 NO. 15080
100° FLAT HEAD, MACHINE THREAD,
CRES, RoHS-COMPLIANT
COLORED SCREW
FH 10F 10 CP G27BL
FEATURES:1. Screws are furnished with pre-colored heads to match
panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect aircraft quality with
emphasis on the forming of the Phillips recess to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in
order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws meet all requirements of MS51959 (UNC-2A)
and MS51960 (UNF-2A). Screws are passivated per SAE-AMS-2700.
2. Threads are in conformance with H28 Federal Handbook for threads.
3. Coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-fur-nished color chips or samples.
REV 06-2014 4-11
THREAD
CODE SIZE
.112-40UNC-2A
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
4C
6C
8C
10F
HEADTYPE
FHC
14
516
4 5
12
8
4 5 8
4 5 8
4 5 8
38
716
6 7
6 7
6 7
6 7
78 1
16
L LENGTH +.00 -.03
58
34
MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
DIMENSIONAL DATA
A
.225
.279
.332
.385
A’
.195
.244
.292
.340
B
.067
.083
.100
.116
C
.017
.021
.024
.028
SHARP ABS. MIN.
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: =82° FLAT HEAD SCREW .190-32 X 1/2” LG, CORROSION RESISTANT STEEL, PHILLIPS DRIVE, SEMI-GLOSS RED PER FED-STD-595 NO. 21105
82° FLAT HEAD, MACHINE THREAD,
CRES, RoHS-COMPLIANT
COLORED SCREW
FHC 10F 8 CP S03RD
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on under-side of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.
SPECIFICATIONS:1. Screws meet the requirements of DIN 965, Metric Machine Screws,
Cross Recess. Dimensions shown in above table are for reference only; refer to current revision of DIN 965 for dimensions and toler-ances. Dimensions are in mm.
2. Screw material is A2 (300 series) corrosion resistant steel (CRES), passivated.
3. Screw head coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
DIMENSIONS ARE IN mm
REV 06-2014 4-12
FHM
THREAD
CODE
2M25M3M4M5M6M
L LENGTH
TOL ± 0.65 MATERIAL
CP
CRES
CROSSRECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
DIM DATA
A
3.80
5.60
7.50
9.20
11.0
4.70
COLORCODE
HEADTYPE
REF
1.2
1.65
2.2
2.5
3.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
PITCH 5 6 8 10 12 16 20 25
0.4
0.45
0.5
0.7
0.8
1.0
TOL ± 0.55TOL ± 0.45TOL ± 0.375
BREF
2525252525
2020202020
161616161616
121212121212
101010101010
888888
666666
555
NOMINALDIAMETER
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
FLAT HEAD METRIC SCREW, M4 X 0.7 THREADS X 10mm LG, CORROSION RESISTANT STEEL, CROSS RECESS, HEAD COATED GLOSS GRAY PER FED-STD-595 NO. 16376
PART NO. EXAMPLE: =
90° METRIC FLAT HEAD,METRIC THREAD, CRES,
RoHS-COMPLIANT
COLORED SCREW
FHM 4M 10 CP G24GY
4-12.1
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burr-ing and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. TORX® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis
on the forming of the TORX® recess to meet design specifica-tion.
3. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.
SPECIFICATIONS:1. Screws meet the requirements of ASME B18.6.7M, Metric Machine
Screws, except with a TORX® Recess. Dimensions shown in above table are for reference only; refer to current revision of ASME B18.6.7M for dimensions and tolerances. Dimensions are in mm.
2. Screw material is 300 series corrosion resistant steel (CRES), pas-sivated.
3. Screw head coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
DIMENSIONS ARE IN mm
REV 05-02-2016
FHM
THREAD
CODE
25M
L LENGTH CODE MATERIAL& RECESS
CT
CRES
TORX®RECESS
DIMENSIONAL DATA
B
1.5
2.3
2.7
2.7
3.3
1.7
HEADTYPE
MAX
T8
T15
T20
T25
T30
T10
2.5
3.0
3.5
4.0
5.0
6.0
PITCH8 16 20 25
0.45
0.5
0.6
0.7
0.8
1.0
TOL ± 0.5TOL ± 0.4TOL ± 0.3 DDRIVESIZE
252525
20202020
161616161616
888
NOMINALDIAMETER
3M35M4M5M6M
81010101010
10 13
131313131313
CODE DESCRIPTIONA
SHARPA’
ABS. MIN
5.5
8.2
9.4
10.4
12.6
6.3
4.4
6.9
8.0
8.9
10.9
5.2
COLOR CODE
SEE STOCK COLOR
LISTDoc No.
SCL870115
A'
L
92°90°A
B
STRAIGHT SIDE ORRADIUS PERMISSIBLE
D - RECESS
DIMENSIONS ARE IN mm
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
FLAT HEAD METRIC SCREW, M3 X 0.5 THREADS X 6mm LONG, CORROSION RESISTANT STEEL, TORX® RECESS, HEAD COATED SEMI-GLOSS RED PER FED-STD-595 NO. 21105
PART NO. EXAMPLE: =
90° METRIC FLAT HEAD,METRIC THREAD, CRES,
TORX® RECESS
COLORED SCREW
FHM 3M 6 CT S03RD
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any
one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Machine Screws.2. Screws are alloy steel and are stocked zinc plated in accordance
with ASTM B633, Class SC1, Type II.3. Threads are in conformance with H28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-13
DIMENSIONAL DATA
A
.225
.279
.332
.385
A’
.195
.244
.292
.340
H
.067
.083
.100
.116
O
.104
.128
.152
.176
SHARP ABS. MIN. REF. MAX.
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE
DSTEEL
PHILLIPSDRIVE
78 11
45
16
4 5
12
8
58
34
4 5 8
5 8
8
38
716
6 7
6 7
6 7
6 7
L LENGTH +.00 -.03THREAD
CODE SIZE
.112-40UNC-2A
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
4C
6C
8C
10F
HEADTYPE
OHC
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
82° OVAL HEAD SCREW .164-32 X 5/8” LG, ALLOY STEEL, PHILLIPS DRIVE, SEMI-GLOSS BLUE PER FED-STD-595NO. 25488
COLORED 82° OVAL HEAD, MACHINE THREAD, ALLOY STEEL,
PLATED
PART NO. EXAMPLE: =
COLORED SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
OHC 8C 10 D S17BL
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any
one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Machine Screws.2. Screws are zinc plated per ASTM B633, Class SC-1 (min), Type
VI-yellow, hexavalent chromium free, RoHS-Compliant.3. Threads are in conformance with H28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-14
DIMENSIONAL DATA
A
.225
.279
.332
.385
A’
.195
.244
.292
.340
H
.067
.083
.100
.116
O
.104
.128
.152
.176
SHARP ABS. MIN. REF. MAX.
MATERIAL
ZRSTEEL
PHILLIPSDRIVERoHS-
COMPLI-ANT ZINC
PLATE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE7
8 114
516
4 5
12
8
58
34
4 5 8
5 8
8
38
716
6 7
6 7
6 7
6 7
L LENGTH +.00 -.03THREAD
CODE SIZE
.112-40UNC-2A
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
4C
6C
8C
10F
HEADTYPE
OHC
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
82° OVAL HEAD SCREW .164-32 X 5/8” LG, ALLOY STEEL, PHILLIPS DRIVE, SEMI-GLOSS BLUE PER FED-STD-595NO. 25488
82° OVAL HEAD, MACHINE THREAD,
ALLOY STEEL, RoHS-COMPLIANT
PART NO. EXAMPLE: =
COLORED SCREW
OHC 8C 10 ZR S17BL
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools
meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any
one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Machine Screws.2. Screws are 300 series corrosion resistant steel and are stocked
passivated per SAE-AMS-2700.3. Threads are in conformance with H28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-15
DIMENSIONAL DATA
A
.225
.279
.332
.385
A’
.195
.244
.292
.340
H
.067
.083
.100
.116
O
.104
.128
.152
.176
SHARP ABS. MIN. REF. MAX.
MATERIAL
CPCRES
PHILLIPSDRIVE
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE7
8 114
516
4 5
12
8
58
34
4 5 8
5 8
8
38
716
6 7
6 7
6 7
6 7
L LENGTH +.00 -.03THREAD
CODE SIZE
.112-40UNC-2A
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
4C
6C
8C
10F
HEADTYPE
OHC
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
82° OVAL HEAD SCREW .164-32 X 5/8” LG, CORROSION RESISTANT STEEL, PHILLIPS DRIVE, SEMI-GLOSS BLUE PER FED-STD-595 NO. 25488
82° OVAL HEAD, MACHINE THREAD,
CRES, RoHS-COMPLIANT
PART NO. EXAMPLE: =
COLORED SCREW
OHC 8C 10 CP S17BL
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burr-ing and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. TORX® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis
on the forming of the TORX® recess to meet design specifica-tion.
3. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
4. The thread diameters and lengths listed in the table are industry
standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Machine Screws, except for recess.2. Screws are stocked zinc plated in accordance with ASTM B633,
Class SC1, Type II.3. Threads are in conformance with H28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We rec-
ommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-16
DIMENSIONAL DATA
A
.279
.332
.385
.507
A’
.244
.292
.340
.452
E
T15
T20
T25
T30
O
.128
.152
.176
.232
SHARP ABS. MIN.
MATERIAL
DTALLOYSTEELTORX®
RECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE1
45
16
4 5
12
8
4 5 8
5 8
8
38
716
6 7
6 7
6 7
6 7
78 15
834
L LENGTH +.00 -.03THREAD
CODE SIZE
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
.250-20UNF-2A
6C
8C
10F
14C
HEADTYPE
OHC
H
.083
.100
.116
.153
MAX.REF.
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW .138-32 X 1/2” LG, STEEL, TORX® RECESS, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26492
82° OVAL HEAD, TORX® RECESS, MACHINE THREAD,
ALLOY STEEL, PLATED
COLORED SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
OHC 6C 8 DT S06GY
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burr-ing and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. TORX® is a registered trademark of Camcar Textron.2. The screws listed in this series reflect high quality with emphasis
on the forming of the TORX® recess to meet design specifica-tion.
3. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to elimi-nate mismating and subsequent damage to the drive recess and coating material.
4. The thread diameters and lengths listed in the table are industry
standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
SPECIFICATIONS:1. Screws are in accordance with ANSI/ASME Standard No.
B18.6.3, Recessed Head Machine Screws.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type
VI-yellow, hexavalent chromium free, RoHS-Compliant.3. Threads are in conformance with H28 Federal Handbook for
threads.4. Coating colors are matched to customer requirements. We rec-
ommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-17
DIMENSIONAL DATA
A
.279
.332
.385
.507
A’
.244
.292
.340
.452
E
T15
T20
T25
T30
O
.128
.152
.176
.232
SHARP ABS. MIN.
MATERIAL
ZRTALLOYSTEELTORX®
RECESS
SEE STOCKCOLOR
LISTDoc No.
SCL870115
COLORCODE1
45
1612
38
716
78 15
834
L LENGTH +.00 -.03THREAD
CODE SIZE
.138-32UNC-2A
.164-32UNC-2A
.190-32UNF-2A
.250-20UNF-2A
6C
8C
10F
14C
HEADTYPE
OHC
H
.083
.100
.116
.153
MAX.REF.
16
16
16
16
14
14
14
14
12
12
12
12
10
10
10
10
8
8
8
8
7
7
7
7
6
6
6
6
5
5
5
4
4
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE: = 82° OVAL HEAD SCREW .138-32 X 1/2” LG, STEEL, RoHS ZINC, TORX® RECESS, SEMI-GLOSS GRAY PER FED-STD-595 NO. 26492
82° OVAL HEAD, TORX® RECESS, MACHINE THREAD, ALLOY STEEL,
RoHS-COMPLIANT ZINC
COLORED SCREW
OHC 6C 8 ZRT S06GY
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specification.2. Care should be exercised to assure that the screwdriver tools
meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thicknesses. Refer to ANSI B18.6.4, Appendix VI.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. These screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Tapping Screws, Type AB thread.2. Screws are stocked zinc plated per ASTM B633, Class SC1,
Type II.3. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-18
CODE PITCHNOMINALDIAMETER
THREAD
6SM
8SM
10SM
20
18
16
OH
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.104
.125
.136
HEADTYPE
14
38
12
58
34
78 1
4 6 8
6 8
6 8
L LENGTH TOL. ±.03
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
HEAD DATA
A HA’
.332
.385
.279
.072.285
.083.333
.060.238
DSTEEL
PHILLIPS DRIVE
COLORCODE
O
.124
.143
.105
SHARP ABS. MIN. MAX.REF.
16
16
16
14
14
14
12
12
12
10
10
10
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
100° OVAL HEAD SHEET METAL SCREW, 6-20 X 3/4” LG, STEEL, PHILLIPS DRIVE, GLOSS RED PER FED-STD-595 NO. 11105
100° OVAL HEAD, SHEET METAL THREAD, STEEL
PART NO. EXAMPLE: =
COLORED SCREW
ZINC PLATING ON THIS PART SERIES IS BEING PHASED OUT IN FAVOR OF AN RoHS-COMPLIANT ZINC
OH 6SM 12 D G03RD
FEATURES:1. Screws are furnished with pre-colored heads to match panels
and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. Screw heads are formed by cold forging followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.
3. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.
NOTES:1. The screws listed in this series reflect high quality with emphasis
on the forming of the Phillips recess to meet design specifica-tion.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The recommended installation hole sizes shown in the table are for light gage (.030) sheet metals. Compensation should be made for other materials and thicknesses. Refer to ANSI B18.6.4, Appendix VI.
4. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.
5. These screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of B70-85 without thread shearing or breakage.
SPECIFICATIONS:1. Screws are in accordance with ASME Standard No. B18.6.3,
Recessed Head Tapping Screws, Type AB thread.2. Screws are zinc plated per ASTM B633, Class SC1 (min), Type
VI-yellow, hexavalent chromium free, RoHS-Compliant.3. Coating colors are matched to customer requirements. We
recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
REV 06-2014 4-19
CODE PITCHNOMINALDIAMETER
THREAD
6SM
8SM
10SM
20
18
16
OH
6
8
10
RECOMMENDEDINSTALLATION
HOLE SIZE
.104
.125
.136
HEADTYPE
14
38
12
58
34
78 1
L LENGTH TOL. ±.03
MATERIAL
SEE STOCKCOLOR
LISTDoc No.
SCL870115
HEAD DATA
A HA’
.332
.385
.279
.072.285
.083.333
.060.238ZRSTEEL
PHILLIPS DRIVERoHS
COMPLI-ANT ZINC
PLATE
COLORCODE
O
.124
.143
.105
SHARP ABS. MIN. MAX.REF.
16
16
16
14
14
14
12
12
12
10
10
10
8
8
8
6
6
64
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
100° OVAL HEAD SHEET METAL SCREW, 6-20 X 3/4” LG, STEEL, RoHS ZINC, PHILLIPS DRIVE, GLOSS RED PER FED-STD-595 NO. 11105
100° OVAL HEAD, SHEET METAL THREAD, PLATED STEEL,
RoHS-COMPLIANT ZINC
PART NO. EXAMPLE: =
COLORED SCREW
OH 6SM 12 ZR G03RD
This catalog section covers pressure displacement STAKE FASTENERS. These fasteners are designed for use in
applications where relatively strong threads are needed in a relatively soft mounting
material. These pressure displacement fasteners must be installed into sheet material that is ductile and capable of forming into the knurled recess of the fastener with-out stress cracking, such as 2024-T3 or 6061-T6 alumi-num. The principle which makes this product unique is the method of installation. The large flange is coined, or pressed, into the sheet until it is flush with the surface. The volume of displaced material is calculated to flow into and fill the void area around the knurled fastener undercut as the fastener is driven into the sheet. The effect of this prin-ciple is that deformation or rivet action occurs to the sheet, not to the fastener. Thus, the “Basic” fastener series listed in this catalog may be installed into a relatively soft metal, providing a relatively hard threaded hole, which is flush with the sheet on both surfaces.
The type “BA” and “BB” series fasteners also provide the grip area flush with both surfaces of the sheet after instal-lation. However, in order to provide a self-locking thread feature, a thin-walled appendage is added which includes a spring action deformed thread. The “BA” series is used in the same manner of a conventional clinch nut with the screw entering through the grip area. The “BB” series is intended for housing the appendage in a thick sheet, such as an edge lighted panel, with the screw entering through the appendage. In both instances the self-locking feature is located on the appendage near the grip area, eliminating the need for the screw length to extend through and out of the fastener. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange.
Pressure Displacement Stake Fasteners
5-0 Stake Fastener Company www.stakefastener.com
The type “Basic”, “BA”, and “BB” fasteners are designed to be installed using standard presses (mechanical, hydraulic, or impact) commonly found in a shop environment. The tooling required is simply a punch and an anvil which can be installed in the press to be used. For the type “Basic” fastener, both the punch and anvil are flat. For the type “BA” and “BB” fasteners, a clearance hole (F & G dimen-sions) is required in the punch for the appendage. See
Table 1 below for recommended punch clearance hole size. Due to the wide variety of press equipment available and the simplicity of the punch and anvil required, it is intended that custom-ers fabricate their own
punch and anvil to fit their particular equipment and appli-cations.
To install the fastener, a mounting hole must be punched or machined into the sheet per dimension ‘E’, shown on the part specifications. It is not necessary nor recommended that the mounting hole be deburred prior to installation Place the sheet material with the mounting hole centered over the flat anvil. Locate the fastener with the small flange diameter towards the sheet (see Figure, INSERT) and centered over the mounting hole. Lower the punch over the fastener and locate the fastener appendage into the clearance hole for type ‘BA’ and ‘BB’ fasteners (see Figure, STAKE). Apply pressure between the punch and anvil to force the fastener into the sheet until the grip areas
are flush with both surfaces of the sheet (see Figure, INSTALLED). This staking process should be performed in one continu-ous motion for best results. The amount of pressure to be applied will vary with fastener size, sheet thick-ness, and type of material used.
Installation of a type “BA” fastener
Pressure Displacement FastenersInstallation Guidelines
INSERT
STAKE
INSTALLED
5-1
Table 1- RECOMMENDED ANVIL CLEARANCE HOLES FOR TYPE ‘BA’ AND TYPE ‘BB’ FASTENERS
THREAD APPDIA
TOOLINGCLEARANCE HOLE
CODE SIZE ∅D ∅F G
2C
4C
6C
8C
10F
14F
.110
.139
.165
.204
.229
.300
.1200
.1470
.1719
.2090
.2344
.3125
#31
#26
11/64
#4
15/64
5/16
.20
.23
.26
.26
.29
.29
.086-56UNC-3B
.112-40UNC-3B
.138-32UNC-3B
.164-32UNC-3B
.190-32UNF-3B
.250-28UNF-3B
Stake Fastener Company www.stakefastener.com
FEATURES:1. The pressure displacement principle provides
a fastener made of a relatively strong material installed into a relatively soft mounting material.
2. The basic fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet.
NOTES:1. High carbon steel (Material Code D) parts are
stock items. Parts made of type 303 corrosion resistant steel (MIL-S-7720) are available, on order, by using Material Code C.
2. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between two anvils which may be installed in any suitable equipment, such as hydraulic or impact punch presses. Pres-sure to be applied will vary with fastener size, sheet thickness and type of material used.
3. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.
4. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange.
SPECIFICATIONS:1. Steel fasteners (Material Code D) are made
of chrome molybdenum alloy per AISI4140 (or equal).
2. Steel fasteners (Material Code D) are cad-mium plated per QQ-P-416, Type II, Class 2.
3. Corrosion resistant steel fasteners (Material Code C) are passivated per SAE-AMS-2700.
INSERT
STAKE
INSTALLED
REV 06-2014 5-2
4E
SF
HEADTYPE
.05.04
4F5E5F
.08.06
6E6F6G6H6J
8F8G8H8J8L
B THICKNESS
.12.10.09
9F9G9H9J9L
10F10G10H10J10L
12F12G12H12J12L
T THREAD
CODE SIZE.086-56UNC-3B.112-40UNC-3B.138-32UNC-3B.164-32UNC-3B.190-32UNF-3B.250-28UNF-3B
2C4C6C8C10F14F
.18.15
15H15J15L
18J18L
A E
.219
.281
.312
.375
.438
.250
.156
.219
.250
.312
.375
.188
MAJ.DIA.
MTG. HOLEDIA.
MATERIAL
DHIGH
CARBONSTEEL(SEE
NOTE 1)
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE:
FASTENERTYPE BASIC
PRESSURE DISPLACEMENT
SF 6G 6C D
FEATURES:1. The pressure displacement principle provides
a fastener made of a relatively strong material installed into a relatively soft mounting material.
2. The BA fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet, except for the protruding self-locking appendage.
NOTES:1. High carbon steel (Material Code D) parts are
stock items. Parts made of type 303 corrosion resistant steel (MIL-S-7720) are available, on order, by using Material Code C.
2. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between a punch and an anvil which may be installed in any suitable equipment, such as hydraulic or impact punch presses. A clearance hole is shown in the punch to accommodate the self-locking appendage.
Pressure to be applied will vary with fastener size, sheet thickness and type of material used.
3. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.
4. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange.
SPECIFICATIONS:1. Steel fasteners (Material Code D) are made
of chrome molybdenum alloy per AISI4140 (or equal).
2. Steel fasteners (Material Code D) are cad-mium plated per QQ-P-416, Type II, Class 2.
3. Corrosion resistant steel fasteners (Material Code C) are passivated per SAE-AMS-2700.
INSERT
STAKE
INSTALLED
REV 06-2014 5-3
4E
SF
HEADTYPE
.06.05.04
4F
4G
5E
5F
5G
6E
6F
6G
6H
6J
B THICKNESS
.18.15.12.10.09.08
8F
8G
8H
8J
8L
9F
9G
9H
9J
9L
10F
10G
10H
10J
10L
12F
12G
12H
12J
12L
15H
15J15L
18J
18L
T THREAD
CODE SIZE.086-56UNC-3B.112-40UNC-3B.138-32UNC-3B.164-32UNC-3B.190-32UNF-3B.250-28UNF-3B
2C4C6C8C10F14F
BA3
BA4
BA5
BA5
BA6
BA6
332
18
532
316
C APPENDAGETYPE & LENGTH
MATERIAL
DHIGH
CARBONSTEEL(SEE
NOTE 1)
A D E
.219
.281
.312
.375
.438
.250
.110 .156
.165 .219
.204 .250
.229 .312
.300 .375
.139 .188
MAJ.DIA.
APP.DIA.
MTG. HOLEDIA.
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
PART NO. EXAMPLE:
FASTENERTYPE BA
PRESSURE DISPLACEMENT
SF 6G 6C BA5 D
FEATURES:1. The pressure displacement principle provides
a fastener made of a relatively strong material installed into a relatively soft mounting material.
2. The BB fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet, except for the protruding self-locking appendage.
NOTES:1. High carbon steel (Material Code D) parts are
stock items. Parts made of type 303 corrosion resistant steel (MIL-S-7720) are available, on order, by using Material Code C.
2. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between a punch and an anvil which may be installed in any suitable equipment, such as hydraulic or impact punch presses. A clearance hole is shown in the punch to accommodate the self-locking appendage.
Pressure to be applied will vary with fastener size, sheet thickness and type of material used.
3. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.
4. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange.
SPECIFICATIONS:1. Steel fasteners (Material Code D) are made
of chrome molybdenum alloy per AISI4140 (or equal).
2. Steel fasteners (Material Code D) are cad-mium plated per QQ-P-416, Type II, Class 2.
3. Corrosion resistant steel fasteners (Material Code C) are passivated per SAE-AMS-2700.
INSERT
STAKE
INSTALLED
REV 06-2014 5-4
T THREAD
CODE SIZE.086-56UNC-3B.112-40UNC-3B.138-32UNC-3B.164-32UNC-3B.190-32UNF-3B.250-28UNF-3B
.18
SF
HEADTYPE MATERIAL
DHIGH
CARBONSTEEL(SEE
NOTE 1)
.15.12.10.09.08.06.05.04
B THICKNESS A D E
.219
.281
.312
.375
.438
.250
.110 .156
.165 .219
.204 .250
.229 .312
.300 .375
.139 .188
MAJ.DIA.
APP.DIA.
MTG.HOLEDIA.
332
18
532
316
C APPENDAGETYPE & LENGTH
4E
4F
4G
5E
5F
5G
6E
6F
6G
6H
6J
8F
8G
8H
8J
8L
9F
9G
9H
9J
9L
10F
10G
10H
10J
10L
12F
12G
12H
12J
12L
15H
15J15L
18J
18L
2C4C6C8C10F14F
BB3
BB4
BB5
BB5
BB6
BB6
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2014 DUPREE, INC.
PART NO. EXAMPLE:
FASTENERTYPE BB
PRESSURE DISPLACEMENT
SF 6G 6C BB5 D
Screws with head styles, special washers, drive shapes and thread forms, standard in the indus-try but not listed in this catalog, can be provided with pre-coated colored heads on order. Addition-ally, we often employ our expertise in cold head-ing, screw machine work, threading, injection and transfer molding, and coating processes to develop special items to meet our customer requirements. A few samples of these special items are shown below. We invite inquiries for such special items and look forward to working with our customers to provide products that will fulfill the needs of their special fastener application requirements.
Special Fasteners
6-0 Stake Fastener Company www.stakefastener.com
.28
.31
.05
.12
1.08
PART NO. EXAMPLE: BR101 BK1
BASICSERIES
NOTES:
1. MATERIAL: VULCANIZED SILICONE RUBBER.
2. FINISH: AS-MOLDED.
3. COLOR: CURRENTLY THIS PART SERIES IS AVAILABLE IN LUSTERLESS BLACK. WHITE IS AVAILABLE ON SPECIAL ORDER SEE TABLE 1 FOR P/N COLORS CODE.
4. PART IS DESIGNED TO FIT A .188 PANEL MOUNTING HOLE IN .05-INCH THICK PANELS.
ISOMETRICVIEW
TABLE 1 - AVAILABLE COLORS
CODE COLORAPPROX
MATCH TO STD SF COLOR
BK1 BLACK S01BKWH1 WHITE S13WH
AS-MOLDEDSEE NOTE #1 2/2/2010
RUBBER BUMPER .31 x .28 TALL HEAD
CUSTOMER DWG
FINISHMATERIAL
ADWG. NO.SIZE
2:1
DR
DATE
APP
DATE
SCALE.XXX .XX ANGULAR
SHEET OF REV
NOTICE: PROPRIETARY INFORMATIONTHIS DOCUMENT AND ALL RELATED DUPREE DRAWINGS ARE THE SOLE PROPERTY OF DUPREE, INC., AND ITS OPERATING DIVISIONS.
DOCUMENTS AND RELATED DRAWINGS DESCRIBE PRODUCTS AND/OR PROCESSES WHICH MAY INVOLVE CORPORATE DESIGNS OR TRADE SECRETS.REPRODUCTION, DISTRIBUTION OR DISCLOSURE TO UNAUTHORIZED PERSONS IS PROHIBITED WITHOUT EXPRESS PERMISSION, IN WRITING.
G. J. M.6/10/2009
.010
.02 2
1 19-159-0735-101
C
J. D. P.
FEATURES:1. Hole Plugs are color-matched to blend with the mounting surface
of panels and equipment.2. Designed to snap in and hold firmly in place. Hole Plugs offer a
simple cover for unneeded holes.3. The durable nylon material allows the product to be snapped
out and reused, or left permanently in place for the life of the equipment.
NOTES:1. The Hole Plugs are designed to fit holes in panels detailed by
dimensions “E” & “F” in the above table.2. For available colors, see Stock Color List, document no.
SCL870115. Additional colors will be added upon request.3. Sizes or head styles other than those shown herein may be
available. Contact factory for further inquiries.
SPECIFICATIONS:1. Hole Plug color is achieved by molding with pigmented nylon
per ASTM D4066.2. Colors are matched to customer requirements. We recom-
mend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.
TYPICAL APPLICATION:
REV 06-2014 6-1
NOMINAL SIZE
CODE DESCRIPTION
1/2” MTG HOLE DIA.0.06” THK PANEL
9/16” MTG HOLE DIA0.17” THK PANEL
5006
5617
SEE STOCKCOLOR LIST
Doc No.SCL870115
DIMENSIONAL DATA
A.103.083
COLORCODESERIES
.103
.083
.27
.23
.26MAX
.505
.495
.567
.557
.100
.050
.175
.165
SFHP
B C D E F
1.02 .98
.697
.677
.697
.6771.02 .98
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2014 DUPREE, INC.
COLORED HOLE PLUGMOLDED NYLON
PART NO. EXAMPLE: = COLORED HOLE PLUG, TO FIT .50” DIA HOLE IN .06” THK PANEL, SEMI-GLOSS BROWN PER FED-STD-595 NO. 20122
COVER FOR UNUSED HOLES
SFHP 5006 S13BN
FEATURES:1. These nylon blind rivets are intended for applications involving
very light loads, generally in plastic materials.2. Rivets can be supplied in colors matched to customer require-
ments. Color can be matched to blend with mounting surfaces or to be a color indicator to suit customer needs.
NOTES:1. These nylon blind rivets are installed by placing rivet prongs
into panel holes; bring panels together and place rivet head in contact with top panel, and then drive pin into rivet body.
2. Rivets can be removed by driving pin through and out of rivet, and then removing rivet body from panels. It is recommended to replace these rivets with new once they are removed from an installation.
SPECIFICATIONS:1. Rivet material is polyamide nylon 66 resin. Rivets are not load-
rated.2. Rivets can be supplied in either natural-colored nylon, color
code is “G02NA”, or color matched to customer requirements. See Stock Color List, document no. SCL870115 for available colors.
3. Colors are matched to customer requirements. We recom-mend selection from FED-STD-595 whenever possible but we are also prepared to match customer furnished color chips or samples.
4. Recommended panel hole size is listed in above table and is based on application grip length (“G” dimension). For example, when using p/n: PRR8-4G02NA in panels where “G” = .188, the recommended hole size is .266 (17/64” drill).
TYPICAL APPLICATION:
REV 06-2014 6-2
NOMINALSIZE
CODE DESC
1/8” DIA1/8” GRIP4-2
6-2
6-3
HOLE SIZE (“D” DIM) FOR RIVET DIAMETER & GRIP LENGTH
G02NANATURALCOLORED
NYLON
SEE STOCKCOLOR
LISTDoc No.
SCL870115FOR OTHERAVAILABLECOLORS
DIMENSIONAL DATACOLORCODESERIES
.171
.141
L N
3
4
PRR
3/16” DIA1/8” GRIP
3/16” DIA3/16” GRIP
1/4” DIA1/4” GRIP
1/4” DIA1/2” GRIP
3/8” DIA1/2” GRIP
8-4
8-8
12-8
4
4
4
4
.171
.141
.233
.203
.296
.266
.546
.516
.546
.516
C
.041
.073
.077
.085
.098
.100
B.053.040
.085
.065
.085
.065
.148
.128
.120
.100
.113
.093
A.203.171
.297
.265
.297
.265
.454
.422
.391
.359
.453
.421
APPLICATION GRIP (“G” DIMENSION)
.125
.031
.187
.125
.062
.187
.187
.129
.094
.189
.187
.257
.194
.199
.125
.136
.156
.204
.261 .266
.213
.188 .219
.272
.375
.250
.277
.250 .281
.250
.375 .377
.250
.312 .344
.261
.386 .391
.266
.375 .406
.277
.397 .406
.290
.438 .469
.295
.413 .422
.302
.500
.250
14395 RAMONA AVENUECHINO, CALIFORNIA 91710
(909) 597-4889 FAX (909) 597-3043CAGE 12324 [email protected]
STAKE FASTENER CO.
C 2016 DUPREE, INC.
ROUND HEAD, PLASTIC
PART NO. EXAMPLE: = BLIND PLASTIC RIVET, ROUND HD, NOMINAL SIZE 1/8”HOLE DIA x 1/8” MAT’L GRIP, NATURAL COLOR PLASTIC
VERY LIGHT LOAD RIVET FASTENING GENERALLY IN PLASTIC MATERIALS
BLIND RIVET
PRR 4 - 2 G02NA
Appendix B - Technical Notes
ScrewdriversOur fasteners are manufactured using high qual-ity materials with emphasis on the forming of the drive recess to meet design specifications. We urge customers to exercise care to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismat-ing and subsequent damage to the drive recess and coating material. We also suggest slightly de-burring the driver tools to remove extreme sharp edges to minimize cutting of the coating materials. This can be achieved by dressing the tool bit with a wire brush as a locksmith does to a newly cut key.
PAN-L-SCREW Tightening TorqueCare must be exercised during installation of PAN-L-SCREWS to prevent over-tightening due to the nature of the nylon washer material. Over-tightening is possible and results in deformed washers. Several factors are involved with deter-mining the proper installation torque, including PAN-L-SCREW size, clearance hole size and thread fit. In most applications we recommend tightening until snug and then tightening an addi-tional 1/4 to 1/2 turn. The compression effect of the nylon washer between the screw head and panel will provide a self-locking feature to prevent vibration from loosening the screw in most appli-cations.
Material HandlingParts are carefully packaged before shipment to customers. Parts are bagged, labeled, tightly wrapped, and properly boxed to protect the color coating during shipment. Package quantities are determined by fastener size to provide proper protection. We recommend that parts remain in their original packing material until just before use. If it is necessary to re-package, then neces-sary care must be exercised to minimize damage from threads rubbing against color-coated sur-faces. The color coating material is very durable but it is a coated surface and can be damaged if proper care is not exercised.
Nominal Thread SizesTo conform to accepted industry standard prac-tices, the nominal thread sizes for machine threads which are specified in this catalog (for non-metric items) are called out in decimal inches, instead of using the screw number or fractional diameter as was customary in the past. The following table gives the equivalent of the screw number / fractional size to the decimal size:
All products are subjected to our documented ISO 9001:2008 and AS9100C quality procedures and are lot-traceable.
B-0
SCREW DIAMETER(NUMBER or
FRACTIONAL SIZE)DECIMAL SIZE
2 0.0860
4 0.1120
6 0.1380
8 0.1640
10 0.1900
12 0.2160
14 0.2500
5/16 0.3125
3/8 0.3750
Stake Fastener Company www.stakefastener.com
Appendix C - Detailed Product Listing
C-0
DescriptionRoHS-
CompliantPage
PAN-L-SCREWS Screws with Captive Decorative Nylon Washer, Color-Matched Screw & Washer 2-0
Machine Thd, Cadmium Plated Alloy, Phillips 2-1
Machine Thd, RoHS-Zinc Plated Alloy, Phillips 2-2
Machine Thd, CRES, Phillips 2-3
Machine Thd, Zinc Plated Alloy, Torx® Machine Thd, Zinc Plated Alloy, Torx® 2-4
Machine Thd, RoHS-Zinc Plated Alloy, Torx® Machine Thd, RoHS-Zinc Plated Alloy, Torx® 2-5
Specialized Captive Pan-L-Screw for Panels 2-6
Sheet Metal Thd, Zinc Plated Steel, Phillips 2-7
Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips 2-8
Sheet Metal Thd, Zinc Plated Steel, Torx® Sheet Metal Thd, Zinc Plated Steel, Torx® 2-9
Sheet Metal Thd, RoHS-Zinc Plated Steel, Torx® Sheet Metal Thd, RoHS-Zinc Plated Steel, Torx® 2-10
Drill Pt-Sheet Metal Thd, Zinc Plated Steel, Phillips 2-11
Drill Pt-Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips 2-12
Metric Thd, Zinc-Plated Alloy, Phillips 2-13
Metric Thd, RoHS-Zinc Plated Alloy, Phillips 2-14
Metric Thd, CRES, Phillips 2-15
Metric Thd, CRES, Torx® 2-16
Screws w/ Captive Washer, Color-Matched 3-0
Pan Hd / Flat Nylon Wshr, Machine Thd, Cadmium Plated Alloy, Phillips 3-1
Pan Hd / Flat Nylon Wshr, Machine Thd, RoHS-Zinc Plated Alloy, Phillips 3-2
Pan Hd / Flat Nylon Wshr, Machine Thd, CRES, Phillips 3-3
Flat Hd (100°) / Nylon Wshr, Machine Thd, Cadmium Plated Alloy & CRES, Phillips 3-4
Oval Hd (82°) / Nylon Trim Wshr, Sheet Metal Thd, Zinc Plated Steel, Phillips 3-5
Oval Hd (82°) / Nylon Trim Wshr, Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips 3-6
Oval Hd (82°) / Lg Nylon Trim Wshr, Sheet Metal Thd, Zinc Plated Steel, Phillips 3-7
Oval Hd (82°) / Lg Nylon Trim Wshr, Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips 3-8
Flat Hd (100°) / Metal Wshr, Machine Thd, Cadmium Plated Alloy, Phillips 3-9
Flat Hd (100°) / Metal Wshr, Machine Thd, RoHS-Zinc Plated Alloy, Phillips 3-10
Flat Hd (100°) / Metal Wshr, Machine Thd, CRES, Phillips 3-11
Decorative Color-Coated Screws 4-0
Pan Hd, Machine Thd, RoHS-Zinc Plated Alloy, Phillips 4-1
Pan Hd, Machine Thd, Plated Alloy, Phillips 4-2
Stake Fastener Company www.stakefastener.com
Appendix C - Detailed Product Listing (Cont.)
C-1
DescriptionRoHS-
CompliantPage
Pan Hd, Machine Thd, CRES, Phillips 4-3
Button Hd, Machine Thd, Zinc Plated Alloy, Hex Recess 4-4
Button Hd, Machine Thd, RoHS-Zinc Plated Alloy, Hex Recess 4-5
Button Hd, Machine Thd, CRES, Hex Recess 4-6
Washer Hd, Machine Thd, Plated Alloy, Phillips 4-7.1
(Cont.) 4-7.2
Flat Hd (100°), Machine Thd, Cadmium Plated Alloy, Phillips 4-8
Flat Hd (100°), Machine Thd, RoHS-Zinc Plated Alloy, Phillips 4-9
Flat Hd (100°), Machine Thd, CRES, Phillips 4-10
Flat Hd (82°), Machine Thd, CRES, Phillips 4-11
Flat Hd (90°), Metric Thd, CRES, Cross 4-12
Flat Hd (90°), Metric Thd, CRES, Torx® 4-12.1
Oval Hd (82°), Machine Thd, Zinc Plated Alloy, Phillips 4-13
Oval Hd (82°), Machine Thd, RoHS-Zinc Plated Alloy, Phillips 4-14
Oval Hd (82°), Machine Thd, CRES, Phillips 4-15
Oval Hd (82°), Machine Thd, Zinc Plated Alloy, Torx® 4-16
Oval Hd (82°), Machine Thd, RoHS-Zinc Plated Alloy, Torx® 4-17
Oval Hd (82°), Sheet Metal Thd, Zinc Plated Steel, Phillips 4-18
Oval Hd (82°), Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips 4-19
Pressure Displacement Stake Fasteners 5-0
Installation Guidelines 5-1
Fastener - Type “BASIC” 5-2
Fastener - Type “BA” 5-3
Fastener - Type “BB” 5-4
Special Fasteners 6-0
Colored Hole Plug, Nylon 6-1
Rivet, Blind, Round Head, Plastic 6-2
Stake Fastener Company www.stakefastener.com
Stake Fastener Company has been the industry standard for color-coated screws and fasteners for over fifty years. Our products are suitable for most applications where a decorative, color-matched fastener is required.
C (MAX)
L
B (REF)
A' 82° A
STRAIGHT SIDE ORRADIUS PERMISSIBLE
L
D (REF)
B
A
Stake Fastener Company14395 Ramona Ave., Chino, CA 91710(909) 597-4889 Fax: (909) 597-3043
[email protected] www.stakefastener.com
® ®
SU64-0009K REV. 11-1-17