color printer installation

I/A Series System

Color Printer Installation for V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, B0400SF

Rev SMarch 1, 2012

V7.0, V7.1.x, and V8.x

Invensys, Foxboro, I/A Series and the Invensys logo are trademarks of Invensys plc, its subsidiaries and affiliates.All other brand names may be trademarks of their respective owners.

Copyright 1999-2012 Invensys Systems, Inc.All rights reserved

Contents

Figures................................................................................................................................... vii

Preface.................................................................................................................................... ix

Revision Information ............................................................................................................... ix

Reference Documents .............................................................................................................. ix

1. OKI Data C711 Installation.............................................................................................. 1

Overview ................................................................................................................................... 1

Printer Configuration ................................................................................................................ 1

Printer Consumables ................................................................................................................. 2

Hardware Requirements ........................................................................................................... 2Parallel Port Connections for Workstations and Servers ....................................................... 2Serial Port Connections ........................................................................................................ 8

I/A Series Model 51 Software Installation ................................................................................. 8

I/A Series COMM10 and PW Software Installation .................................................................. 8

I/A Series Software Installation on Windows XP Workstations ................................................. 9Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server Workstations ....................................................................................... 9

Appendix A. OKI Data C6050 Installation ......................................................................... 11

Overview ................................................................................................................................. 11

Printer Configuration .............................................................................................................. 11

Printer Consumables ............................................................................................................... 12

Hardware Requirements ......................................................................................................... 12Parallel Port Connections for Workstations and Servers ..................................................... 12

Appendix B. HP 9800 Installation ...................................................................................... 19

Overview ................................................................................................................................. 19



Hardware Requirements .......................................................................................................... 20Parallel Port Connections for Workstations and Servers ..................................................... 20Parallel Port Connections for 70 Series Workstations ......................................................... 24Serial Port Connections ...................................................................................................... 27

I/A Series Model 51 Software Installation ............................................................................... 27

I/A Series COMM10 and PW Software Installation ................................................................ 28iii

B0400SF Rev S Contents

I/A Series Software Installation on Windows-Based Workstations ........................................... 29Installing Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System) .............................................................................................................. 29Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server Workstations ..................................................................................... 29

Appendix C. Lexmark Optra Color 45 Installation ........................................................... 31

Overview ................................................................................................................................. 31



Hardware Requirements .......................................................................................................... 32Parallel Port Connections ................................................................................................... 32Serial Port Connections ...................................................................................................... 34


I/A Series COMM10 and PW Software Installation ................................................................ 38

Appendix D. Withdrawn Printers and Installation of HP DeskJet 1600CM....................... 43

Printers Withdrawn from Sale ................................................................................................. 43

HP DeskJet 1600CM Installation on Previous I/A Series Versions .......................................... 44

HP 1600CM Printer Consumables ......................................................................................... 45

HP 1600CM Color Printer (P0912QJ) Setup ......................................................................... 45

Converter Switch Settings ....................................................................................................... 46

Appendix E. Legacy HP 2800 Installation........................................................................... 47

Overview ................................................................................................................................. 47



Hardware Requirements ......................................................................................................... 48Parallel Port Connections for 50 Series Workstations ......................................................... 48Parallel Port Connections for 70 Series Workstations ......................................................... 52Serial Port Connections ...................................................................................................... 54


I/A Series COMM10 and PW Software Installation ................................................................ 55

I/A Series Software Installation on Windows-Based Workstations ........................................... 55Installing Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System) .............................................................................................................. 55Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server Workstations ..................................................................................... 55

Appendix F. Problem Solving .............................................................................................. 57

Cannot Access Printer ............................................................................................................. 57iv

Contents B0400SF Rev S

No Output from Print Screen ................................................................................................. 57

Error Output from Print Screen .............................................................................................. 57

Cropped Print Screen Output ................................................................................................. 58

Corrupted Print Screen Output .............................................................................................. 58

No ASCII Output ................................................................................................................... 58

Skewed ASCII Output ............................................................................................................ 58Printing from AP10 or AP20 .............................................................................................. 59Printing from 50 Series Stations ......................................................................................... 59Printing from Model 51 Stations ........................................................................................ 59Printing from PWs ............................................................................................................. 60v

B0400SF Rev S Contents

vi

Figures

1-1. AP51, AW51, and WP51 Style B to Printer Interface ................................................... 31-2. AW51 Style C to Printer Interface ................................................................................ 31-3. AP51, AW51, and WP51 Style D to Printer Interface ................................................... 41-4. AW51 Style E to Printer Interface ................................................................................. 41-5. P79 to Printer Interface ................................................................................................. 51-6. P80 to Printer Interface ................................................................................................. 51-7. P81 to Printer Interface ................................................................................................. 61-8. H92/P92 Workstation to Printer Interface .................................................................... 61-9. H91/P91 Server to Printer Interface .............................................................................. 71-10. H90/P90 Server to Printer Interface .............................................................................. 7A-1. AP51, AW51, and WP51 Style B to Printer Interface ................................................. 12A-2. AW51 Style C to Printer Interface .............................................................................. 13A-3. AP51, AW51, and WP51 Style D to Printer Interface ................................................. 13A-4. AW51 Style E to Printer Interface ............................................................................... 14A-5. P79 to Printer Interface ............................................................................................... 14A-6. P80 to Printer Interface ............................................................................................... 15A-7. P81 to Printer Interface ............................................................................................... 15A-8. Workstation to Printer Interface ................................................................................. 16A-9. H91/P91 Server to Printer Interface ............................................................................ 16A-10. H90/P90 Server to Printer Interface ............................................................................ 17B-1. AP51, AW51, and WP51 Style B to Printer Interface ................................................. 20B-2. AP51, AW51, and WP51 Style B1 to Printer Interface ............................................... 21B-3. AW51 Style C to Printer Interface .............................................................................. 21B-4. AP51, AW51, and WP51 Style D to Printer Interface ................................................. 22B-5. AW51 Style E to Printer Interface ............................................................................... 22B-6. P79 to Printer Interface ............................................................................................... 23B-7. P80 to Printer Interface ............................................................................................... 23B-8. P81 to Printer Interface ............................................................................................... 24B-9. P93 Workstation to Printer Interface .......................................................................... 24B-10. Workstation to Printer Interface ................................................................................. 25B-11. H91/P91 Server to Printer Interface ............................................................................ 26B-12. H90/P90 Server to Printer Interface ............................................................................ 26C-1. AP51, AW51, and WP51 Style A to Printer Interface .................................................. 32C-2. AP51, AW51, and WP51 Style B to Printer Interface ................................................. 32C-3. AP51, AW51, and WP51 Style B1 to Printer Interface ............................................... 33C-4. AW51 Style C to Printer Interface .............................................................................. 33C-5. AP51, AW51, and WP51 Style D to Printer Interface ................................................. 34C-6. AP51, AW51, and WP51 Style E to Printer Interface ................................................. 34C-7. Converter P0912KA/KB Rev. E .................................................................................. 35C-8. Converter P0912KA/KB Rev. A to Rev. C .................................................................. 35C-9. Communications Processor Host with P0970VB Peripheral Switch

(Current Applications) ................................................................................................ 36C-10. Communications Processor Host without P0970VB Peripheral Switch

(Early Applications) ..................................................................................................... 36vii

B0400SF Rev S Figures

C-11. AP50/AW50 Host, Using Serial Port .......................................................................... 37C-12. Communications Processor Host with P0970VB Peripheral Switch

(Current Applications) ................................................................................................ 37C-13. Communications Processor Host without P0970VB Peripheral Switch

(Early Applications) ..................................................................................................... 38E-1. AP51, AW51, and WP51 Style B to Printer Interface ................................................. 48E-2. AP51, AW51, and WP51 Style B1 to Printer Interface ............................................... 49E-3. AW51 Style C to Printer Interface .............................................................................. 49E-4. AP51, AW51, and WP51 Style D to Printer Interface ................................................. 50E-5. AW51 Style E to Printer Interface ............................................................................... 50E-6. P79 to Printer Interface ............................................................................................... 51E-7. P80 to Printer Interface ............................................................................................... 51E-8. P81 to Printer Interface ............................................................................................... 52E-9. P93 Workstation to Printer Interface .......................................................................... 52E-10. Workstation to Printer Interface ................................................................................. 53E-11. H91/P91 Server to Printer Interface ............................................................................ 53E-12. H90/P90 Server to Printer Interface ............................................................................ 54viii

Preface

Color printers currently being sold by Invensys for use with the I/A Series system are the OKI Data C711 Digital Color printer.

Revision InformationFor this release of the document (B0400SF, Rev. S), the following changes were made:

Global

Replaced all references to Okidata with the preferred term OKI Data.Appendix A OKI Data C6050 Installation

Appendix B HP 9800 Installation

Moved these chapters to appendices, as their products have been withdrawn from sale.Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM

Added these withdrawn-from-sale printers to Table D-1.

Reference DocumentsRefer to the following documents for further information on the installation for software versions 2.3 through 4.2 only:

Hewlett-Packard DeskJet 1600CM Color Printer Installation on Models 50 and 51 Processors (B0193SH)

Hewlett-Packard DeskJet 1600CM Color Printer Installation on V2.3.x Platforms (B0193SK)

Hewlett-Packard DeskJet 1600CM Color Printer Installation on VRTX Platforms (B0193SJ).

Refer to the following document for further information on supported color printers for Solaris 10 workstations on The Mesh network:

Color Printer Installation for V8.x Solaris Based Systems (B0700BT).Most are available on the I/A Series Electronic Documentation CD-ROM (K0173TQ or K0173WT) provided by the Foxboro business unit of Invensys Operations Management. The lat-est revisions may also be available through Invensys Global Customer Support Center at http://support.ips.invensys.com. ix

B0400SF Rev S Preface

x

1. OKI Data C711 Installation

This chapter describes the installation of an OKI Data C711 Digital Color printer.

OverviewThe OKI Data C711 Digital Color printer provides print screen and text printing for 50 Series (Solaris-based) workstations and 70 Series (Windows-based) workstations. The OKI Data C711 shipment includes new software and installation documents when the printer is purchased from Invensys.

Upgraded Model 51 software is needed to convert Model 51 screen information to printer com-mands. The new Model 51 software on the diskette can be loaded only in systems running the Solaris 2.5.1 operating system or Solaris 8 operating system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, and V7.x. The new software also includes scripts that facilitate loading and configuration of the printer software. For information on Solaris 10 workstation printer installation, refer to Color Printer Installation for V8.x Solaris Based Systems (B0700BT).

Since the Model 51 software needed to upgrade to the OKI Data C711 color printer comprises only a few executables, the software for all stations is shipped on one diskette. Be certain to tar in only the software name specified for each processor type. See I/A Series Model 51 Software Installation on page 8. If you have an older version of software, refer to Appendix C Lexmark Optra Color 45 Installation and Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM for software and loading instruction part numbers.

The OKI Data C711 color printer can be used with workstations running the Windows operating system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, V7.x, and V8.x. For Windows-based workstations, printer drivers can be installed during normal I/A Series software installation or from the CD shipped with the printer. See I/A Series Software Installation on Windows XP Workstations on page 9.

Printer ConfigurationThe OKI Data C711 is a parallel port printer. It should be ordered using the part numbers listed below. The assembly includes the printer, software, and documentation:

P0924UT Assembly, 120 V ac OKI Data C711 Digital Color Printer, Printer Supporting Software, and Instructions

P0924UU Assembly, 240 V ac OKI Data C711 Digital Color Printer, Printer Supporting Software, and Instructions1

B0400SF Rev S 1. OKI Data C711 Installation

Printer ConsumablesThe consumables for the OKI Data C711 are listed below:

Hardware RequirementsThe following parallel port hardware is required.

NOTEThe OKI Data C711 does not support serial port connections, I/A Series WP20/30 operations, or COMM10 connections.

Parallel Port Connections for Workstations and Servers

NOTEFigures are examples only, refer to the Hardware and Software Specific Instructions documentation supplied with your workstation or server for determining connection information.

A P0918WQ cable (15 ft) or P0922WW cable (50 ft), connects the OKI Data C6050 to the 50 Series AP/WP/AW.

Print Cartridge, Magenta P0924UV

Print Cartridge, Yellow P0924UW

Print Cartridge, Cyan P0924UX

Print Cartridge, Black P0924UY

Print Drum, Magenta P0924UZ

Print Drum, Yellow P0924VA

Print Drum, Cyan P0924VB

Print Drum, Black P0924VC2

1. OKI Data C711 Installation B0400SF Rev S

Figure 1-1. AP51, AW51, and WP51 Style B to Printer Interface

Figure 1-2. AW51 Style C to Printer Interface

Color PostScript printer(rear view)

AP51B, WP51B, or AW51B (rear view)

P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)

P0971GP adapter cable and either:

AW51C(rear view)


P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)

P0971GP adapter cable and either:3


Figure 1-3. AP51, AW51, and WP51 Style D to Printer Interface

Figure 1-4. AW51 Style E to Printer Interface


AP51D, WP51D, or

Parallel port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

AW51D (rear view)

PCI166 1

PCI 2

A

TP

MII

B

PCI 3

PCI 4

AW51E (rear view)

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

Color PostScript printer(rear view)4


Figure 1-5. P79 to Printer Interface


P79

Parallel Port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

(rear view)


P0918WQ 4.5 m (15 ft)

P80

P0922WW 15 m (50 ft)

Parallel Port

(rear view)




Figure 1-8. H92/P92 Workstation to Printer Interface

P0918WQ 4.5 m (15 ft)

P81

P0922WW 15 m (50 ft)

Parallel Port

(rear view)


P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Parallel portColor PostScript printer

(rear view)

Note: H92 HPZ400 uses a plug-in board for the parallel printer interface.6


Figure 1-9. H91/P91 Server to Printer Interface

Figure 1-10. H90/P90 Server to Printer Interface

H91/P91

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Serial/parallelColor PostScript printer(rear view) card

H90/P90

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)


Serial/parallelcard7


Serial Port Connections


I/A Series Model 51 Software InstallationThe OKI Data C711 can only be used on V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, and V7.x. (For information on Solaris 10 workstation printer installation, refer to Color Printer Instal-lation for V8.x Solaris Based Systems [B0700BT]). When you are printing screens from an AW51 or WP51, a newer version of the /usr/fox/wp/bin/xwd2ps executable needs to be loaded on the station originating the print screen. The newer version is used for releases 4.3x, 6.1x, 6.2x, and 6.3. Your system must have already been configured and installed with a PostScript printer. Load the newer software by following these instructions.

1. Insert the Color Printer Software diskette, Part Number K0173UW-H, in the drive.

2. From a VT100 window enter:cd /var/tmptar xvf /dev/rfd0 ./prt-load.51

3. Run the script; enter:prt-load.51

4. Answer the questions as it runs.

NOTEThe OKI Data C6150 will also function properly if configured using the selection of the OKI Data C6050 while running the prt-load.51 script.

Now the Print Screen function sends a proper PostScript file to the OKI Data C711 printer. In some cases it may be necessary to reboot the AW or WP.

I/A Series COMM10 and PW Software Installation

NOTEThe OKI Data C711 does not support serial port connections, I/A Series WP20/30 operations, or COMM10 connections.8


I/A Series Software Installation on Windows XP Workstations

Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server WorkstationsUsing the system configuration software, such as SysDef or IACC, you can configure I/A Series workstations running the Windows XP operating system and servers running the Windows Server 2003 operating system with parallel printers.

The system configuration software assigns names to the printers such as LP01 and LP02. This information is then placed on the Commit disk. When you perform an I/A Series software instal-lation, the Commit disk is read and a printer driver is installed for each named printer.

The printer driver is generic and may not be the best driver for the parallel printer that it is associ-ated with. Use the following procedure to determine which printer drivers are installed on your workstation and to replace them if necessary.

1. From the Windows Start menu, select Settings > Printer and Faxes.

The Printers and Faxes window opens. This window lists each configured printer.

2. Review the descriptions in the Model column. Make note of the SysDef LPxx name currently assigned to the printer (for example LP01).

3. If they do not match, delete the current printer (for example HP 1200) and install the correct one from the CD that was shipped with your printer.

NOTEIf the appropriate driver is not installed, the CPU loading can reach 100% for an extended period of time and cause connections to other I/A Series workstations to break.

NOTEThe 50 foot extension kit (P0971LS) is not compatible with Windows XP worksta-tions. The 50 foot (P0922WW) cable must be used for the 50 foot option.

a. Insert the CD into the CD-ROM drive in your computer.

b. Follow the instructions that appear to add the new printer to the parallel port (LPT1).

c. After the installation is complete, open the Printers and Faxes window.

d. Select the printer you just installed and rename it to match the SysDef name that you noted in step 2 above. 9


10

Appendix A. OKI Data C6050 Installation

This chapter describes the installation of the legacy OKI Data C6050 Digital Color printer (withdrawn from sale).

OverviewThe OKI Data C6050 Digital Color printer provides print screen and text printing for 50 Series (Solaris-based) workstations and 70 Series (Windows-based) workstations. The OKI Data C6050 shipment includes new software and installation documents when the printer is purchased from Invensys.


Since the Model 51 software needed to upgrade to the OKI Data C6050 color printer comprises only a few executables, the software for all stations is shipped on one diskette. Be certain to tar in only the software name specified for each processor type. If you have an older version of software, refer to Appendix C Lexmark Optra Color 45 Installation and Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM for software and loading instruction part num-bers.

The OKI Data C6050 color printer can be used with workstations running the Windows operat-ing system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, V7.x, and V8.x. For Windows-based workstations, printer drivers can be installed during normal I/A Series software installation or from the CD shipped with the printer. See I/A Series Software Installation on Windows-Based Workstations on page 29.

Printer ConfigurationThe OKI Data C6050 is a parallel port printer. It should be ordered using the part numbers listed below. The assembly includes the printer, software, and documentation:

P0923ZC Assembly, 120 V ac OKI Data C6050 Digital Color Printer, Printer Supporting Software, and Instructions

P0923ZD Assembly, 230 V ac OKI Data C6050 Digital Color Printer, Printer Supporting Software, and Instructions11

B0400SF Rev S Appendix A. OKI Data C6050 Installation

Printer ConsumablesThe consumables for the OKI Data C6050 are listed below:



Parallel Port Connections for Workstations and Servers

NOTEFigures are examples only; refer to the Hardware and Software Specific Instructions documentation supplied with your workstation or server for determining connection information.

A P0918WQ cable (15 ft) or P0922WW cable (50 ft), connects the OKI Data C6050 to the 50 Series AP/WP/AW.

Figure A-1. AP51, AW51, and WP51 Style B to Printer Interface

Print Cartridge, Black P0923ZH

Print Cartridge, Cyan P0923ZE

Print Cartridge, Magenta P0923ZF

Print Cartridge, Yellow P0923ZG



P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)


Appendix A. OKI Data C6050 Installation B0400SF Rev S

Figure A-2. AW51 Style C to Printer Interface

Figure A-3. AP51, AW51, and WP51 Style D to Printer Interface

AW51C(rear view)


P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)

P0971GP adapter cable and either:


AP51D, WP51D, or

Parallel port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

AW51D (rear view)13


Figure A-4. AW51 Style E to Printer Interface

Figure A-5. P79 to Printer Interface

PCI166 1

PCI 2

A

TP

MII

B

PCI 3

PCI 4

AW51E (rear view)

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)


P79

Parallel Port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

(rear view)





P0918WQ 4.5 m (15 ft)

P80

P0922WW 15 m (50 ft)

Parallel Port

(rear view)


P0918WQ 4.5 m (15 ft)

P81

P0922WW 15 m (50 ft)

Parallel Port

(rear view)



Figure A-8. Workstation to Printer Interface

Figure A-9. H91/P91 Server to Printer Interface

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Parallel portColor PostScript printer

(rear view)

H91/P91

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Serial/parallelColor PostScript printer(rear view) card16


Figure A-10. H90/P90 Server to Printer Interface

H90/P90

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)




18

Appendix B. HP 9800 Installation

This chapter describes the installation of the legacy HP 9800 Color DeskJet printer (withdrawn from sale).

OverviewThe HP 9800 Color DeskJet printer provides print screen and text printing for 50 Series (Solaris-based) workstations and 70 Series (Windows-based) workstations. The HP 9800 shipment includes new software and installation documents when the printer is purchased from Invensys.

The new Model 51 software on the diskette can be loaded only in systems running the Solaris 2.5.1 operating system or Solaris 8 operating system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, and V7.x. The new software also includes scripts that facilitate loading and configuration of the printer software. For information on Solaris 10 workstation printer installation, refer to Color Printer Installation for V8.x Solaris Based Systems (B0700BT).

Since the Model 51 software needed to upgrade to the HP 9800 Color DeskJet printer comprises only a few executables, the software for all stations is shipped on one diskette. Be certain to tar in only the software name specified for each processor type. See I/A Series Model 51 Software Installation on page 27. If you have an older version of software, refer to the tables in Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM for software and loading instruction part numbers.

The HP 9800 Color DeskJet printer can be used with workstations running the Windows operat-ing system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, V7.x, and V8.x. For Windows-based workstations, printer drivers can be installed during normal I/A Series software installation or from the CD shipped with the printer. See I/A Series Software Installation on Windows-Based Workstations on page 29.

Printer ConfigurationThe HP 9800 is a parallel port printer. The HP 9800 printer should be ordered using the part number listed below. The assembly includes the printer, software, and documentation:

NOTEThe duplex feature described in the HP documentation is not available or sup-ported by Invensys.

P0923HT Assembly, HP 9800 for Parallel Interface, Printer Supporting Software, and Instructions19

B0400SF Rev S Appendix B. HP 9800 Installation

Printer ConsumablesThe consumables for the HP 9800 are listed below.

Hardware Requirements The following parallel port hardware is required.

NOTEThe HP 9800 does not support serial port connections, I/A Series WP20/30 opera-tion, or COMM10 connections.

Parallel Port Connections for Workstations and ServersFigures are examples only, refer to the Hardware and Software Specific Instructions documentation supplied with your workstation or server for determining connection information.

A P0918WQ cable (15 ft) or P0922WW cable (50 ft), connects the HP 9800 to the 50 Series AP/WP/AW.

Figure B-1. AP51, AW51, and WP51 Style B to Printer Interface

Print Cartridge, Black P0923HU

Print Cartridge, Color P0923HV

Premium Coated Paper, 8.5x11 in, 100 sheets P0918FL

Transparency Film, 8.5x11 in, 20 sheets P0918FM

Color DeskJet Printer(rear view)


P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)


Appendix B. HP 9800 Installation B0400SF Rev S

Figure B-2. AP51, AW51, and WP51 Style B1 to Printer Interface

Figure B-3. AW51 Style C to Printer Interface


P0918WQ 4.5 m (15 ft)P0922WW 15 m (50 ft)

or AW51B1(rear view)

AP51B1, WP51B1,


AW51C(rear view)

P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)



Figure B-4. AP51, AW51, and WP51 Style D to Printer Interface

Figure B-5. AW51 Style E to Printer Interface


AP51D, WP51D, or

Parallel Port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

AW51D (rear view)


PCI166 1

PCI 2

A

TP

MII

B

PCI 3

PCI 4

P0918WQ 4.5 m (15 ft)

AW51E (rear view)

P0922WW 15 m (50 ft)22


Figure B-6. P79 to Printer Interface



P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

P79(rear view)

Parallel Port


P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

P80

Parallel Port

(rear view)23



Parallel Port Connections for 70 Series WorkstationsA P0918WQ (15 ft) or P0922WW (50 ft) cable connects the HP 9800 to 70 Series workstations.

Figure B-9. P93 Workstation to Printer Interface


P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

P81

Parallel Port

(rear view)


Parallel Port

P93(rear view)

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)24


Figure B-10. Workstation to Printer Interface



P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

Parallel Port

(rear view)25


Figure B-11. H91/P91 Server to Printer Interface

Figure B-12. H90/P90 Server to Printer Interface


P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

H91/P91(rear view)

Serial/parallelcard


P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

H90/P90(rear view)




NOTEThe HP 9800 does not support serial port connections, I/A Series WP20/30 opera-tions, or COMM10 connections.

I/A Series Model 51 Software InstallationThe HP 9800 can only be used on V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, and V7.x.

Insert the Color Printer Software diskette, Part Number K0173UW-F or later, in the drive. This needs to be done on all sources and destinations of print screens for PCL3 printing.

1. From a VT100 window, enter:cd /var/tmptar xvf /dev/rfd0 ./prt-load.51



4. Now the Print Screen function sends PCL3 commands to HP 9800 printer. It is nec-essary to reboot the AW or WP.

5. View the /etc/printers file to insure the LPxx device is defined as a color Inkjet printer. Do not have PS in the description field, as this overrides and generates PostScript output. If /etc/printers must change, make a backup copy using cp -p /etc/printers /etc/printers.bak. Then use the vi editor to change the description field. Be careful not to expand or contract the size of the field.

6. View the text file /etc/printscreen.options. It associates PCL3 characteristics with an LPxx port. Use the vi editor to change characteristics of the printscreen.

An entry must exist for each HP 9800 printer configured and must conform to the following format (this must be done on all sources and destinations of print screens):

:LPxx PCL3

The port must be indicated by starting the line with a colon followed by LPxx, where xx is the assigned printer port number. User selectable HP 9800 printer options follow the port name; each option must be separated by either a space or line feed. The options are listed in Table B-1.

Table B-1. User Selectable HP 9800 Printer Options

Option Type Keyword Note

Language Option PCL3 Required

Page Orientation PORTRAIT

LANDSCAPE Default27


The minimum entry should be: LPxx PCL3. This uses the standard default values.

To override a default, add an option to the list in the /etc/printscreen.options file (this must be done on all sources of print screens):

:LPxx PCL3 PORTRAIT

or enter in the /etc/printscreen.options file, one of the entries defined in the /etc/printscreen.printers file.

7. Edit the following lpadmin command so that the printer is properly initialized (this must be done on all destinations of print screens):

lpadmin -pLPxx -T hplaser -i /usr/fox/exten/standard -I simple

8. Exit the VT100 window.

Repeat Steps 4 through 6 for each AW/WP51.



Print Resolution RESOLUTION75

RESOLUTION90

RESOLUTION150

RESOLUTION300 Default

Compression DELTA_RLE_COMPRESSION Default

RLE_COMPRESSION

Print Quality DRAFT Default

NORMAL

PRESENTATION

Scaling INTEGER_SCALE

REAL_SCALE Default

Color STD_COLORS_ONLY Default

STD_AND_NOMINAL_COLORS

NOMINAL_COLORS_ONLY

Table B-1. User Selectable HP 9800 Printer Options (Continued)Option Type Keyword Note28


I/A Series Software Installation on Windows-Based Workstations

Installing Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System)When you install a printer on a 70 Series workstation running the Windows NT operating sys-tem, the normal installation of I/A Series software allows for the proper driver to be used. When printers are configured and the PCL3 option is selected, the software driver for a HP 855 is loaded. The HP 9800 printer cannot use this same driver on Windows NT based units.

Since this printer driver is not ideal for this printer, use the following procedure to install the cor-rect driver.




3. If they do not match, delete the current printer (for example HP 855) and install the correct one from the CD (HP supplied) that was shipped with your printer.


a. Insert the CD (HP) into the CD-ROM drive in your computer.

b. Follow the instructions that appear (alternatively there is a file on the CD (HP) which you can open to read and follow) to add the new HP 9800 printer to the parallel port (LPT1).


d. Select the HP 9800 you just installed and rename it to match the SysDef name that you noted in step 2 above.

Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server WorkstationsIf you have configured a parallel Inkjet printer for an I/A Series workstation that is running the Windows XP or Windows Server 2003 operating system, when you install the printer using the SysDef utility, the I/A Series software installation automatically installs the HP 1200 printer driver. Since this printer driver is not ideal for this printer, use the following procedure to install the correct driver.



2. Review the descriptions in the Model column. Make note of the SysDef LPxx name currently assigned to the printer (for example LP01).29


3. If they do not match, delete the current printer (for example HP 855) and install the correct one from the CD that was shipped with your printer.



b. Follow the instructions that appear (alternatively there is a file on the CD which you can open to read and follow) to add the new HP 9800 printer to the parallel port (LPT1).


d. Select the HP 9800 you just installed and rename it to match the SysDef name that you noted in step 2 above. 30

Appendix C. Lexmark Optra Color 45 Installation

This chapter describes the installation of the legacy Lexmark Optra Color 45 printer.

OverviewThe Lexmark Optra Color 45 printer provides print screen and text printing for 50 Series, 70 Series, and COMM Server/PW processors. The Lexmark Optra Color 45 shipment includes new software and installation documents when the printer is purchased from Invensys Foxboro. The upgraded software is needed to convert Model 51 screen information to printer commands. The new Model 51 software can be loaded only in systems running on Solaris 2.5.1; this corre-sponds to Invensys releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, and V6.5. The new software also includes scripts that facilitate loading and configuration of the printer software.

Since the amount of software needed to upgrade to the Lexmark Optra Color 45 printer is only a few executables, the software for all stations is shipped on one diskette. Be certain to tar in only the software name specified for each processor type. If you have an older version of software, refer to the tables in Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM for software and loading instruction part numbers.

Printer ConfigurationThe Lexmark Optra Color 45 has two options. The printers are tagged with these numbers:

Printer ConsumablesThe consumables for the Lexmark Optra Color 45 (either part number P0918FG or P0918FH) are listed below:

P0918FG Printer, Lexmark Optra Color 45 for Parallel Interface

P0918FH Printer, Lexmark Optra Color 45 for Serial Interface.

Print Cartridge, Black P0918FJ

Print Cartridge, Color P0918FK


Transparency Film, 8.5x11 in, 20 sheets P0918FM31

B0400SF Rev S Appendix C. Lexmark Optra Color 45 Installation

Hardware RequirementsThe following parallel or serial port hardware is required.

Parallel Port ConnectionsA P0918WQ or P0971GT cable (15 ft), or P0971GL or P0971LS cable (50 ft), connects the HP 1600CM to the 50 Series AP/WP/AW (or PW).

Figure C-1. AP51, AW51, and WP51 Style A to Printer Interface

Figure C-2. AP51, AW51, and WP51 Style B to Printer Interface

Color PostScript Printer

P0912QJ HP 1600CM(rear view)

AP51A/WP51A/AW51A (rear view)

P0918WQ 4.5 m (15 ft)P0971LS 15 m (50 ft)*

* P0971LS is a kit consisting of cabling, a transceiver module, and a receiver module.

P0918FG Optra 45 Lexmark




P0971GT 4.5 m (15 ft)P0971GL 15 m (50 ft)*

*P0971GL is a kit consisting of cabling, a transceiver module, and a receiver module.

P0918FG Lexmark Optra 45 32

Appendix C. Lexmark Optra Color 45 Installation B0400SF Rev S

Figure C-3. AP51, AW51, and WP51 Style B1 to Printer Interface

Figure C-4. AW51 Style C to Printer Interface

P0918WQ 4.5 m (15 ft)P0971LS 15 m (50 ft)*


* P0971LS is a kit consisting of cabling, a transceiver module, and a receiver module.

AP51B1, WP51B1,



P0918FG Lexmark Optra 45

P0971GT 4.5 m (15 ft)P0971GL 15 m (50 ft)*

AW51C(rear view)

*P0971GL is a kit consisting of cabling, a transceiver module, and a receiver module.





Figure C-5. AP51, AW51, and WP51 Style D to Printer Interface

Figure C-6. AP51, AW51, and WP51 Style E to Printer Interface

Serial Port ConnectionsSerial port connections have a serial-to-parallel converter and a cable between the host and the printer. The converter (Rev. E) consists of a DB-25 to RJ-45 connector, a 7-ft data cable, and the data converter with Centronics converter.

Cables: P0970WX, P0970VB or P0500JX (with peripheral switch)

AP51D, WP51D, or*P0971LS is a kit consisting of cabling, a transceiver module, and a receiver module.

Parallel Port

P0918WQ, 4.5 m (15 ft)P0971LS, 15 m (50 ft)*

AW51D (rear view)



P0918FG Lexmark Optra 45

PCI166 1

PCI 2

A

TP

MII

B

PCI 3

PCI 4



P0918WQ 4.5 m (15 ft)

AP51E, WP51E, or AW51E (rear view)

P0971LS 15 m (50 ft)*

*P0971LS is a kit consisting of cabling, a transceiver module, anda receiver module.



Cables: P0800AZ, P0800AC (without peripheral switch) Converter: P0912KA-E (see Figure C-7).

Figure C-7. Converter P0912KA/KB Rev. E

If converter is either a P0912KA/KB Rev. A to Rev. C then refer to Figure C-8 for connections. Also, this device needs a power adapter to supply voltage to this converter.

Figure C-8. Converter P0912KA/KB Rev. A to Rev. C

The serial-to-parallel switch settings on P0912KA-E or higher are preset internally and no adjust-ment is required. When a P0912KA-A, P0912KA-B, or P0912KA-C is used the switch settings are as follows:

9600 baud, 8 bits no parity, self-test disabled, serial-to-parallel mode.The following switches are located on the side of unit:

UP = 2, 3, 6, 8DOWN = 1, 4, 5, 7

DTE/DCE SWITCH = DTE MODE.The following jumper is located inside the unit:

JP1 removed.The P0912KA-A, P0912KA-B, or P0912KA-C serial-to-parallel converter is supplied in two parts: the power unit and a separate box fitted with a 25-pin DB-25 female and a Centronics female connector. The power unit is voltage dependent. One unit (Invensys Foxboro part number P0912KA) is suitable for 100 to 110 V ac and the other (Invensys Foxboro part number P0912KB) for 220 to 240 V ac applications.

Note: This device is self-powered; therefore, no external power is needed.

To Printer

Centronics7 Foot Cable RJ-45

From Host Cable

25 Pin

From Host Cable

25 Pin

ac InputPower Converter

P0912KA/KBP0912KG

To Printer

Centronics35


Figure C-9. Communications Processor Host with P0970VB Peripheral Switch(Current Applications)

Figure C-10. Communications Processor Host without P0970VB Peripheral Switch(Early Applications)



Serial-to-ParallelConverterP0912KA-E

P0500JXP0970VB

P0970WX

(Port B)

COMM10

12 m (40 ft)0.6 m (2 ft)P0918FG Lexmark Optra 45



(Port B)

P0800AZ1.8 m (6 ft)

COMM10

P0918FG Lexmark Optra 45P0912QJ HP 1600CM(rear view)

P0800AC36


Figure C-11. AP50/AW50 Host, Using Serial Port

Figure C-12. Communications Processor Host with P0970VB Peripheral Switch(Current Applications)

Color PostScript PrinterP0918FG Lexmark Optra 45P0912QJ HP 1600CM


P0970BW 15 m (50 ft)

(Port B)

AP50/AW50(rear view)

(rear view)


(Port B)

P0970VB

COMM10

P0918FH Lexmark Optra 45(rear view)

Serial port connections may have the serial port card in the Optra Color 45 Printer and cables only to the COMM10.

P0970WX12 m (40 ft)

P0500JX0.6 m (2 ft)37


Figure C-13. Communications Processor Host without P0970VB Peripheral Switch(Early Applications)

I/A Series Model 51 Software InstallationThe Lexmark Optra Color 45 can only be used on V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, and V6.5. When you are printing screens from an AW51 or WP51, a newer version of the /usr/fox/wp/bin/xwd2ps executable needs to be loaded on the station originating the print screen. Your system must have already been configured and installed with a PostScript printer. Load the newer software by following these instructions.

1. Insert the Color Printer Software diskette, Part Number K0173UW-C or later, in the drive.

2. From a VT100 window, enter:cd /var/tmptar xvf /dev/rfd0 ./prt-load.51



Now the Print Screen function sends a proper PostScript file to the Lexmark Optra Color 45 printer.

I/A Series COMM10 and PW Software InstallationThe Lexmark Optra Color 45 printer can print screens from all versions of WP30 and PW, when the printer is connected to a COMM Server 10 or a PW host. The printers host (COMM10 or PW) converts the print screen data to PCL5 commands for the printer.


(Port B)

P0800AZ1.8 m (6 ft)

COMM10

P0918FH Lexmark Optra 45(rear view)

P0800AC38


NOTEThis is the same processing that was done for the HP 1600CM printer. So, if you have already installed an HP 1600CM and replaced it with a Lexmark Optra Color 45, no work needs to be done. Just plug in the new printer.

Depending upon the version of System Definition used, the printer type may be set up as a PaintJet printer. This is type 2 for the P1DEV parameter in the IIF.dat and IIF.prm files. If it is kept this way, the print screens to a Lexmark printer have the screen objects in all black and white. The following set of instructions modifies the IIF.dat and IIF.prm files on the hosting station, and allows a reinstallation of the hosting station to change the printer port type to 10, which is needed for PCL5.

At this point, the COMM10 (and/or PW) Committed Install must have already been run, and determined that the printer port type does not match the printer type.

1. Insert the Color Printer Software diskette, Part Number K0173UW-C or later, into the COMM10s host system drive (or in the PWs diskette drive, since the PW is self- hosting).

2. Invoke a VT100 window and enter:cd /usr/tmp

On a Model 51, enter:tar xvf /dev/rfd0 ./prt-setup.10

On an AP20 and PW, enter: tar xvf /dev/rfh0 ./prt-setup.10

Remove the diskette, K0173UW-C, from the diskette drive.

3. Check the software configuration by entering:prt-setup.10 REPORT 0 0 0 | grep

Verify the value of P1DEV (P2DEV, P3DEV, or P4DEV) for the printer you need to change. It needs to be 10 for a PCL5 type printer. To verify value, enter:

prt-setup.10

4. Change the current P1DEV (P2DEV, P3DEV, or P4DEV) to the desired value 10. Enter:

prt-setup

For example: prt-setup.10 CMSR05 2 2 10

5. Repeat the prt-setup command for each placement of a PCL5 printer.

6. Make a dummy tar diskette for Software Install, because Software Install asks for a dis-kette, even though no new software is needed.

Put a blank diskette in the diskette drive.

Enter:

format /dev/rfh0 on an AP20 and PW, or enter fdformat /dev/rfd0 on a 51 Series station.

touch empty

On a Model 51, enter:39


tar cvf /dev/rfd0 empty

On an AP20 or PW, enter:tar cvf /dev/rfh0 empty

7. Start executing Software Install for AP20 or AP51 from the WSYE terminal by enter-ing the following:

cd /usr/fox/swiinstallap

NOTEOn a WYSE terminal, selection is done by either first letter or arrow key followed by Enter, since there is no mouse.

Or, start executing Software Install from the graphical interface on a workstation pro-cessor or PW by picking the following:

Config on top menu barINSTALL_PW or INSTALL_AW from Config drop-down menu.

8. Complete the Software Install.

a. Select UTILITIES.

b. Select RE-INSTALL SELECTED PACKAGES from the drop-down menu.

c. Verify that at least 3,000 blocks are free in / and /usr. This disk space is needed to run install.

d. Select INSTALL.

e. Select packages from the package menu (OS1CS, OS3PC3, OS3PC4, or OS3PC1).

f. Select INSTALL PACKAGE from the top menu bar.

g. Select UNSTAMPED SET 1 3.5 FLOPPY.

h. Select LOAD SELECTED MEDIA from top menu bar.

i. Select LOAD with the dummy diskette inserted in the diskette drive.

j. Repeat this step for each station needing to be installed.

9. Verify the software install had no errors.

a. Select LOG REVIEW from the Software Install top menu.

b. Select DISPLAY INSTALLATION LOG from drop-down menu.

10. Review the installation log for errors. If no errors are found, proceed to the next step. If errors are found, contact the Invensys Global Customer Support Center. Customers in the USA and Canada may call 866-746-6477.

11. Reboot the COMM10 station module via System Management or the PW by select-ing PW-Shutdown.

12. Select the print screen printer, picking SELECT PRINTER from the Config button drop-down menu. The printer is now ready to use.40


NOTEChanges from the default parameter settings are necessary when the printers serial interface is used for connections to a COMM Server. For the necessary changes of the factory defaults, make the following selections on the printers front panel:1. Select SERIAL MENU in the printer display, then select SERIAL OPTION 1, then select SERIAL PROTOCOL, and select XON/XOFF/DTR.2. In SERIAL MENU and SERIAL OPTION 1 selection, select PARITY and select EVEN. Then select RETURN three times.41


42

Appendix D. Withdrawn Printers and Installation of HP DeskJet 1600CM

This appendix describes printers withdrawn from sale and HP DeskJet 1600CM installation on previous I/A Series versions.

Printers Withdrawn from SaleThe original equipment manufacturers have withdrawn these color printers from their product lines. Invensys has also withdrawn these from sale.

Table D-1. Printers Withdrawn from Sale

PrinterInvensys Part

Number

Color Inkjet printer (serial, 100Vac) P0901EK

Color Inkjet printer (serial, 120Vac) P0901EL

Color Inkjet printer (serial, 220Vac) P0901EM

Color Inkjet printer (serial, 240Vac) P0901EZ

Color Inkjet printer (parallel, 100Vac) P0902ND

Color Inkjet printer (parallel, 120Vac) P0902MF

Color Inkjet printer (parallel, 220Vac) P0902MX

Color Inkjet printer (parallel, 240Vac) P0902MY

DeskJet 1200C/PS (PostScript, PCL5) color printer P0971GD

DeskJet 1600CM (PostScript, PCL5) color printer P0912QJ

DeskJet 870Cxi (PCL3) color printer P0913SF

DeskJet 890Cxi (PCL3) color printer P0915CA

DeskJet 895 (PCL3) color printer P0917BD

Lexmark Optra Color 45 (PostScript, PCL5) P0918FG/FH

DeskJet 950C (PCL3) color printer P0918XQ

DeskJet 960C (PCL3) color printer P0922HT

Inkjet 2250 (PostScript, PCL5) color printer P0922DC

Inkjet 2280 (PostScript, PCL5) color printer P0922MQ

Inkjet 3000 (PostScript, PCL5) color printer P0922WV

DeskJet 6122 (PCL3) color printer P0922MU

Inkjet 2300 (PostScript, PCL5) color printer P0923DR43

B0400SF Rev S Appendix D. Withdrawn Printers and Installation of HP

HP DeskJet 1600CM Installation on Previous I/A Series Versions

Refer to Hewlett-Packard DeskJet 1600CM Color Printer Installation on VRTX Platforms (B0193SJ) when installing the software on the following systems.

Refer to Hewlett-Packard DeskJet 1600CM Color Printer Installation on V2.3.x Platforms (B0193SK) when installing the software on the following systems.

Refer to Hewlett-Packard DeskJet 1600CM Color Printer Installation on Models 50 and 51 Processors (B0193SH) when installing the software on the following systems.

HP 2800 (PostScript, PCL5) color printer P0923QT

Lexmark Optra Color 45 printer for Parallel Interface P0918FG

Lexmark Optra Color 45 printer for Serial Interface P0918FH

HP 9800 printer for Parallel Interface P0923HT

120 V ac OKI Data C6050 digital color printer P0923ZC

230 V ac OKI Data C6050 digital color printer P0923ZD

ReleaseVersion COMM10

PW-OE 5210

PW-OE 5010 PW-NB PW-C PW-FB

4.2 K0173LT K0173LS ----- K0173LR K0173LP K0173LQ

4.1.x J0200GU J0200GV ----- J0200GW J0200GX J0200GY

4.0.x J0200GZ J0200HA ----- J0200HB J0200HC J0200HD

3.3.x J0200HE or J0200HQ

J0200HF J0200HR J0200HG J0200HH J0200HJ

ReleaseVersion COMM10

PW-OE 5210

PW-OE 5010 PW-NB PW-C PW-FB

2.3.x J0200HK J0200HL J0200HS J0200HM J0200HN J0200HP

Release Version AP/AW50 AP/AW51

4.2 Supported Supported

4.1.x Supported Supported

4.0.x K0173HW K0173HX

3.3.x K0173HW K0173HX

2.3.x N/A N/A

Table D-1. Printers Withdrawn from Sale (Continued)

PrinterInvensys Part

Number44

Appendix D. Withdrawn Printers and Installation of HP DeskJet 1600CM B0400SF Rev S

HP 1600CM Printer ConsumablesThe consumables for the HP 1600CM printer (P0912QJ) are listed in Table D-2.

HP 1600CM Color Printer (P0912QJ) SetupThe I/A Series system uses the default setup of the printer. The setup instructions are given in case the printer was changed from its default setup. The HP DeskJet 1600CM Control Panel is an MS-DOS software program that uses control panel options to make changes in the printer setup. This program requires a fully implemented bidirectional cable (P0912QL) from the PCs parallel port to the printer.

The selections should be as follows:

TRAYS

Paper Source: Paper Tray Paper Size: Letter Paper Type: Plain

PAGE SETUP

Orientation: Portrait Lines/Page: 60 Copies: 1

PRINT QUALITY

Print Mode: Normal Color Mode: Color

FONTS

Symbol Set: Roman-8 Pitch: 10

LANGUAGE

Context Switch: OnOTHER SETTINGS

Centronics Type: Standard

Table D-2. Printer Consumables

DescriptionInvensys Foxboro

Part Number

Black cartridge P0912QK

Cyan cartridge P0971GF

Magenta cartridge P0971GG

Yellow cartridge P0971GH

50 Sheets of glossy paper, 8.5x11 in P0971GJ

50 Sheets of transparencies, 8.5x11 in P0971GK45

B0400SF Rev S Appendix D. Withdrawn Printers and Installation of HP

Energy Star: On Printer Port: LPT1 Page Protect: Off Printer Time-out: 15.

Converter Switch SettingsThe serial-to-parallel switch settings on P0912KA-E or higher are preset internally and no adjust-ment is required. When a P0912KA-A, P0912KA-B or P0912KA-C is used, the switch settings are as follows:

9600 baud, 8 bits no parity, self-test disabled, serial-to-parallel mode.The following switches are located on the side of unit:

UP = 2, 3, 6, 8DOWN = 1, 4, 5, 7

DTE/DCE SWITCH = DTE MODE.The following jumper is located inside the unit:

JP1 removed.The serial-to-parallel converter is supplied in two parts: the unit and a separate box fitted with a 25-pin DB-25 female and a Centronics female connector. The power unit is voltage dependent. One unit (Invensys Foxboro part number P0912KA) is suitable for 100 to 110 V ac and the other (Invensys Foxboro part number P0912KB) for 220 to 240 V ac applications.46

Appendix E. Legacy HP 2800 Installation

This appendix describes the installation of the legacy HP 2800 Color PostScript printer (P0923QT). This printer has been replaced with the OKI Data C6050 Digital Color printer (P0923ZC and P0923ZD) discussed in Chapter 1 OKI Data C711 Installation.

OverviewThe legacy HP Business Inkjet 2800 Color PostScript printer provides print screen and text print-ing for 50 Series (Solaris-based) workstations and 70 Series (Windows-based) workstations. The HP 2800 shipment includes new software and installation documents when the printer is purchased from Invensys.


Since the Model 51 software needed to upgrade to the HP 2800 Color PostScript printer com-prises only a few executables, the software for all stations is shipped on one diskette. Be certain to tar in only the software name specified for each processor type. See I/A Series Model 51 Software Installation on page 54. If you have an older version of software, refer to Appendix C Lexmark Optra Color 45 Installation and Appendix D Withdrawn Printers and Installation of HP DeskJet 1600CM for software and loading instruction part numbers.

The HP 2800 Color PostScript printer can be used with workstations running the Windows operating system; this corresponds to I/A Series system releases V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, V7.x, and V8.x. For Windows-based workstations, printer drivers can be installed during normal I/A Series software installation or from the CD shipped with the printer. See I/A Series Software Installation on Windows-Based Workstations on page 55.

Printer ConfigurationThe HP 2800 is a parallel port printer. The HP 2800 printer should be ordered using the part number listed below. The assembly includes the printer, software, and documentation:

P0923QT Assembly, HP 2800 for Parallel Interface, Printer Supporting Software, and Instructions47

B0400SF Rev S Appendix E. Legacy HP 2800 Installation

Printer ConsumablesThe consumables for the HP 2800 are listed below:



Parallel Port Connections for 50 Series WorkstationsA P0918WQ cable (15 ft) or P0922WW cable (50 ft), connects the HP 2800 to the 50 Series AP/WP/AW.

Figure E-1. AP51, AW51, and WP51 Style B to Printer Interface

Print Cartridge, Black P0922DD

Print Cartridge, Cyan P0922DE

Print Cartridge, Magenta P0922DF

Print Cartridge, Yellow P0922DG

Printhead, Black P0922DH

Printhead, Cyan P0922DJ

Printhead, Magenta P0922DK

Printhead, Yellow P0922DL


Transparency Film, 8.5x11 in, 20 sheets P0918FM



P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)


Appendix E. Legacy HP 2800 Installation B0400SF Rev S

Figure E-2. AP51, AW51, and WP51 Style B1 to Printer Interface

Figure E-3. AW51 Style C to Printer Interface

P0918WQ 4.5 m (15 ft)P0922WW 15 m (50 ft)


AP51B1, WP51B1,


AW51C(rear view)


P0918WQ 4.5 m (15 ft) orP0922WW 15 m (50 ft)



Figure E-4. AP51, AW51, and WP51 Style D to Printer Interface

Figure E-5. AW51 Style E to Printer Interface


AP51D, WP51D, or

Parallel port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

AW51D (rear view)

PCI166 1

PCI 2

A

TP

MII

B

PCI 3

PCI 4

AW51E (rear view)

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)



Figure E-6. P79 to Printer Interface


P79

Parallel Port

P0918WQ, 4.5 m (15 ft)P0922WW, 15 m (50 ft)

(rear view)


P0918WQ 4.5 m (15 ft)

P80

P0922WW 15 m (50 ft)

Parallel Port

(rear view)




Parallel Port Connections for 70 Series WorkstationsA P0918WQ (15 ft) or P0922WW cable (50 ft) connects the HP 2800 to 70 Series workstations.

Figure E-9. P93 Workstation to Printer Interface

P0918WQ 4.5 m (15 ft)

P81

P0922WW 15 m (50 ft)

Parallel Port

(rear view)


P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

Parallel port

P93(rear view)



Figure E-10. Workstation to Printer Interface

Figure E-11. H91/P91 Server to Printer Interface

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Parallel port


H91/P91

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)

Serial/parallel


card53


Figure E-12. H90/P90 Server to Printer Interface



I/A Series Model 51 Software InstallationThe HP 2800 can only be used on V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, and V7.x. (For information on Solaris 10 workstation printer installation, refer to Color Printer Installation for V8.x Solaris Based Systems [B0700BT]). When you are printing screens from an AW51 or WP51, a newer version of the /usr/fox/wp/bin/xwd2ps executable needs to be loaded on the sta-tion originating the print screen. The newer version is used for releases 4.3x, 6.1x, 6.2x, and 6.3. Your system must have already been configured and installed with a PostScript printer. Load the newer software by following these instructions.

1. Insert the Color Printer Software diskette, Part Number K0173UW-F or later, in the drive.

2. From a VT100 window enter:cd /var/tmptar xvf /dev/rfd0 ./prt-load.51

H90/P90

P0918WQ 4.5 m (15 ft) P0922WW 15 m (50 ft)

(rear view)






Now the Print Screen function sends a proper PostScript file to the HP 2800 printer. In some cases it may be necessary to reboot the AW or WP.



I/A Series Software Installation on Windows-Based Workstations

Installing Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System)When you install a printer on a 70 Series workstation running the Windows NT operating sys-tem, the normal installation of I/A Series software allows for the proper driver to be used. When printers are configured and the PostScript option is selected, the software driver for a HP 1200 is loaded. The HP 2800 printer can use this same driver on Windows NT based units.

Installing Drivers for Parallel Printers Attached to Windows XPand Windows Server WorkstationsUsing system configuration software such as SysDef or IACC, you can configure I/A Series workstations running the Windows XP operating system and servers running the Windows Server 2003 operating system with parallel printers.

The system configuration software assigns names to the printers such as LP01 and LP02. This information is then placed on the Commit disk. When you perform an I/A Series software instal-lation, the Commit disk is read and a printer driver is installed for each named printer.

The printer driver is generic and may not be the best driver for the parallel printer that it is associ-ated with. Use the following procedure to determine which printer drivers are installed on your workstation and to replace them if necessary.




3. If they do not match, delete the current printer (for example HP 1200) and install the correct one from the CD that was shipped with your printer.55


NOTE1. If the appropriate driver is not installed, the CPU loading can reach 100% for an

extended period of time and cause connections to other I/A Series workstationsto break.

2. The PCL5c driver requires less CPU loading than the PostScript driver. Bothdrivers are included on the CD.

NOTEServers running the Windows Server 2003 operating system require that you install the PCL6 driver from the CD.



b. Follow the instructions that appear to add the new printer to the parallel port (LPT1).


d. Select the printer you just installed and rename it to match the SysDef name that you noted in step 2 above. 56

Appendix F. Problem Solving

This appendix addresses common printer problems.

Cannot Access PrinterWhen the printer is receiving or processing data, the Ready light flashes. If you cannot make the printers Ready light flash from either a remote station or the printers host station with either the Print Screen function or lp (to print an ASCII file), check the following:

Verify that the I/A Series system has been properly configured for a PaintJet printer. Verify that the printer is properly cabled, as described in this document, and that all

switch settings are properly set.

Verify that the printers ONLINE and Ready lights are lit and that the serial-to-parallel converter is powered.

Verify that the printer appears in Systems Management and is on-line. Execute the DeskJet self-test. Execute the lpstat -t command from a VT100 window and verify that the scheduler is

running and the printer is enabled and accepting requests.

No Output from Print ScreenIf an ASCII file can be sent to the printer but Print Screen does not make the printers Ready light flash, verify that the /etc/printers file is accurately modified and verify that the correct printer is selected with the Select Printer function from the workstations Display Manager.

NOTEWhen the extended parallel printer cable connection is used, the status returned to the processor and displayed on SMDH indicates the state of the modem line and not the state of the printer. If the actual state of the printer is needed, the normal parallel port cable, or a COMM Server 10 connection should be used.

Error Output from Print ScreenThe printer may display the following error message when attempting a Print Screen command:

ERROR: undefined

OFFENDING COMMAND:.......

STACK:

This indicates that the printer cannot read the data or that it has lost characters in the process of transmitting the data. Check the following:

Verify that the printer is properly cabled, as described in this document, and check all switch settings.57

B0400SF Rev S Appendix F. Problem Solving

Verify that an ASCII file can be printed. Use Print Screen to print a 1/2 inch by 1/2 inch window; no flow control is used. Execute the DeskJet self-test. Cycle the power to both the DeskJet printer and the serial-to-parallel converter.

Cropped Print Screen OutputPrint Screens from 50 Series workstations appear correct but cropped on the bottom and right side if the workstation is sending PaintJet commands instead of PostScript output. Check the following:

Verify that the /etc/printers file is accurately modified.

NOTEThe modification made to this file when this document is installed is lost if a Soft-ware Install is performed.

Select another printer, then reselect the desired printer. The description line must have a PS in it.

Verify that the software is properly installed. Reboot the workstation.

Corrupted Print Screen OutputWhen the printer receives an improper file, it prints corrupted images. To clear the improper file from the printer, turn the power off on both the DeskJet printer and the serial-to-parallel con-verter, if present, for at least 30 seconds.

If this does not clear the problem, run the self-test on the DeskJet printer.

No ASCII OutputWhen a file has been sent to the HP 1600CM for printing, the Ready light flashes. However, the printer does not print a page until it has received a Form Feed command or more than a full page of output. A Form Feed command can be issued by either pressing the Form Feed button, or by sending the printer a Form Feed command, for example:

echo l > /dev/LP##

Skewed ASCII OutputWhen the line termination character in an ASCII file is instead of , output may be skewed. That is, each line of the output begins in the column following the end of the proceed-ing line.58

Appendix F. Problem Solving B0400SF Rev S

Printing from AP10 or AP20To avoid skewed ASCII output on an AP10/20, print ASCII files with the following lp command:

lp -dLP## readme.txt

Printing from 50 Series StationsTo avoid skewed ASCII output on 50 Series stations, instruct the printer to do a each time it sees only . This can be done by sending the printer an escape sequence as follows:

echo \033&k2G >/dev/LP##

Sending the DeskJet printer a PostScript file (that is, a Print Screen from a 50 Series workstation) clears the setting and requires that the file be re-sent. However, the above command can be added to a script, or the escape sequence can be added to the beginning of an ASCII file.

Printing from Model 51 StationsTo modify a Model 51 stations script file such that the lp command issues the escape sequence to the printer prior to printing and also issues a Form Feed command to eject the last page, make the following changes on each AP/AW/WP51 in the system:

1. Type:

cd /etc/lp/interfaces

cp LPxx HP1200 (LPxx: logical name for the HP DeskJet)

2. Using a text editor, find the following at or about line 709:#####

# Set the page size and print spacing, but not the

# character set.

# We will be doing the character set later (after the

# header).

#####

internal_lpset ${cpi.} ${lpi} ${width} ${length}

3. Add the following line after the above text:# Echo command to printer to map Newlines # as Carriage-return Newline./bin/echo \0033&k2G\c

4. Find near the end of the file:if [-n ${FF} -a yes = ${nofilebreak}]

then

echo ${CR}${FF}\c

fi

Add the following lines after the above text:# Eject the last page out of the printer/bin/echo \0014\c59

B0400SF Rev S Appendix F. Problem Solving

5. Issue the following lpadmin command:rm LPxxln -s HP1200 LPxxlpadmin -p LPxx -i /etc/lp/interfaces/HP1200

An lp of an ASCII file is formatted properly and the last page is ejected.

6. To keep the changes permanent through a system reboot, add the name of the new interface file to /var/tmp/padmin.ia. Perform the following steps:

a. Type cd /var/tmp to change to the correct directory.

b. Create a backup of padmin.ia. Type cp p padmin.ia padminia.sav.

c. Open the padmin.ia file with a text editor.

d. Find the line in the file with ln s ps_interface LPxx.

e. Change this line to ln s HP1200 LPxx.

f. Save your changes and exit the text editor.

g. Create a new copy of padmin.ia. Type cp p padmin.ia padminia.new.

Printing from PWsTo avoid skewed ASCII output on PWs, instruct the printer to do a each time it sees only . This can be done by sending the printer an escape sequence as follows:

/bin/echo \0033&k2G\c >/dev/LP##60

Appendix F. Problem Solving B0400SF Rev S

61

Invensys Operations Management5601 Granite Parkway Suite 1000Plano, TX 75024United States of Americahttp://www.iom.invensys.com

Global Customer SupportInside U.S.: 1-866-746-6477Outside U.S.: 1-508-549-2424 or contact your local Invensys representative.Website: http://support.ips.invensys.com

Go BackColor Printer Installation for V4.3.x, V6.1.x, V6.2.x, V6.3, V6.4, V6.5, V6.5.x, V7.0, V7.1.x, and V8.xContentsFiguresPrefaceRevision InformationReference Documents

1. OKI Data C711 InstallationOverviewPrinter ConfigurationPrinter ConsumablesHardware RequirementsParallel Port Connections for Workstations and ServersSerial Port Connections

I/A Series Model 51 Software InstallationI/A Series COMM10 and PW Software InstallationI/A Series Software Installation on Windows XP WorkstationsInstalling Drivers for Parallel Printers Attached to Windows XP and Windows Server Workstations

Appendix A. OKI Data C6050 InstallationOverviewPrinter ConfigurationPrinter ConsumablesHardware RequirementsParallel Port Connections for Workstations and Servers

Appendix B. HP 9800 InstallationOverviewPrinter ConfigurationPrinter ConsumablesHardware RequirementsParallel Port Connections for Workstations and ServersParallel Port Connections for 70 Series WorkstationsSerial Port Connections

I/A Series Model 51 Software InstallationI/A Series COMM10 and PW Software InstallationI/A Series Software Installation on Windows-Based WorkstationsInstalling Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System)Installing Drivers for Parallel Printers Attached to Windows XP and Windows Server Workstations

Appendix C. Lexmark Optra Color 45 InstallationOverviewPrinter ConfigurationPrinter ConsumablesHardware RequirementsParallel Port ConnectionsSerial Port Connections

I/A Series Model 51 Software InstallationI/A Series COMM10 and PW Software Installation

Appendix D. Withdrawn Printers and Installation of HP DeskJet 1600CMPrinters Withdrawn from SaleHP DeskJet 1600CM Installation on Previous I/A Series VersionsHP 1600CM Printer ConsumablesHP 1600CM Color Printer (P0912QJ) SetupConverter Switch Settings

Appendix E. Legacy HP 2800 InstallationOverviewPrinter ConfigurationPrinter ConsumablesHardware RequirementsParallel Port Connections for 50 Series WorkstationsParallel Port Connections for 70 Series WorkstationsSerial Port Connections

I/A Series Model 51 Software InstallationI/A Series COMM10 and PW Software InstallationI/A Series Software Installation on Windows-Based WorkstationsInstalling Drivers for Parallel Printers Attached to 70 Series Workstations (Windows NT Operating System)Installing Drivers for Parallel Printers Attached to Windows XP and Windows Server Workstations

Appendix F. Problem SolvingCannot Access PrinterNo Output from Print ScreenError Output from Print ScreenCropped Print Screen OutputCorrupted Print Screen OutputNo ASCII OutputSkewed ASCII OutputPrinting from AP10 or AP20Printing from 50 Series StationsPrinting from Model 51 StationsPrinting from PWs

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterSt

color printer installation

Documents

x invensys

ia series comm10

ia series model

pw software installation

printer configuration

printer consumables

oki data c6050 installation

oki data c711 installation