colt canada catalog
TRANSCRIPT
- NOTE -
• On May 20, 2005, Colt Canada Corporation became a subsidiary of Colt Defense LLC, West Hartford, Connecticut, USA. The C7 rifle and C8 carbine displayed in this brochure arerespectively licensed variants of the Colt Defense M16/M4 models.
• Colt Defense is the owner of the M16/M4 technical data packages used to make these weapons. As such, Colt Canada is the sole source supplier of the C7/C8 weapons to theCanadian military and Colt Defense is the sole source supplier of the M4 carbine to the U.S. military.
• The products offered for sale in this catalogue are available for purchase by military and law enforcement governmental agencies, subject to applicable Canadian and US law,including, but not limited to the Canadian Automatic Firearms Country Control List (AFCCL), and ITAR and ATF regulations, and other restrictions. Accordingly these products are notfor sale or resale to the general public or to any unauthorized party.
• 7.62mm Chain Gun® Weapons are manufactured by Colt Canada, under licence from ATK®.
C o p y r i g h t © C o l t C a n a d a C o r p o r a t i o n 2 0 1 0
Product/Service Engineering:An outstanding reputation has been established with clients for ourparticular ability to develop and implement products that arecustomized to suit specific user requirements. New challengespresented by our clients spur Colt Canada's ongoing productdevelopment and improvement. The design team reaches newheights in conceptual design, materials and manufacturing methods,product definition, rapid prototyping and verification testing.
Quality Assurance & Testing:Colt Canada’s Quality System is certified and registered to theinternational standard of ISO 9001:2008. Canadian Forces qualityassurance representatives reside on site at our manufacturingfacility and are available to support our export clients.
Integrated Logistic Support:Colt Canada's ongoing support lasts from the design phase throughthe life cycle of the weapon system.
Armourer and Operator Training and Aids:Instruction is available at our facility or a location of your choice. Topquality training aids from animation to cutaway weapons will be madeto specification.
Spares Programs:From initial provisioning to ongoing supply, top quality componentsare always available.
Repair & OverhaulColt Canada manages a large repair and overhaul facility that iscapable of performing R&O on all Small Arms including .50 CalMachine Guns and beyond as required.
Technical Publications:Colt Canada produces world class professional publicationsincluding: repair manuals, on-line libraries, and coursewaredevelopment.
Ongoing Engineering Support:Colt Canada’s Engineering Team is available for productimprovements, contracted testing and any other engineering supportrequested by the client.
C7 Users Group:Our military customers gather bi-annually to share information aboutthe weapons systems. Here we are able to discuss new design ideasand corrections if required.
Regular Technical Service Bulletins:Maintenance processes are under constant review and productinnovations are tested on a regular basis. This information is sharedwith existing clients on a regular basis.
Product Range:Accessories - A full range of accessories are available forintegration with the main products to provide systems specificallytailored to client requirements.
Great People Producing Outstanding Results:Colt Canada’s continued success in providing clients with leadingedge products, services and systems that are routinely required ismade possible by the outstanding skills and capabilities of the menand women who are Colt Canada. Our employees understand andaccept the profound responsibilities of delivering critically importantproducts and services to military and law enforcement clients.They take pride in making that responsibility an integral part ofeverything they do.
COLT CANADA CORPORATION
1
I N T E G R A T E D U P P E R R E C E I V E RIntroducing the Colt Canada Integrated Upper Receiver. Today’s high tech battle situations require our soldiers and law officers to bear the burden of multi-tasking many
accessories at once from lasers and lights to electronic sighting systems. Engineered to give the operator of this weapon system the maximum in flexibility. A solid, light-weight
metal, one piece upper receiver that fits smoothly onto any Colt Canada lower receiver makes the transition to the IUR quick and simple. Third party rail systems are no longer
required. They can be expensive, complicated and prone to breakage due to the stresses of hard training and use in combat. The IUR gives the operator Four Solid Rails in Weaver
or MIL-STD 1913 (Picatinny); two rails @ 3 and 9 o’clock for accesssory mounting; one reinforced 6 o’clock rail with recoil lug for a grenade launcher, underslung shot-gun or
forward grip mounting and one 12 o’clock 355mm or 500mm continuous rail for various inline sighting options. Barrel length now becomes an option! Your Colt Canada, cold
hammer forged barrels can be easily swapped out to suit your operational requirements, from Close Quarter Battle 11.6”, Standard 14.5”, Extended 15.7” or Rifle 20”. The IUR
is a float tube, where like a sniper rifle, the floating barrel provides for greater accuracy from a system that already fires 1 MOA. The IUR is here!
MAXIMUM FLEXIB IL ITY
2
FEATURES:
• Continuous 355 mm 12 o’clock rail
• Continuous 500 mm 12 o’clock rail * Under Development
• Re-enforced 6 o’clock rail with Grenade Launcher recoil lug
• 2 accessory rails @ 3 & 9 o’clock
• Ambidextrous Controls
• Folding front sight
• Floating barrel
• Various length cold hammer-forged heavy barrel options
• Flash suppressor
• Bayonet lug
• Single or double sided sling loop
• 4 or 6 position buttstock with non-slip rubber butt pad
B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 3 4 C 3
ONE SOLUTIONCOMMAND SITUATIONS DEMAND COMMAND SOLUTIONS
DOOR KICKERSC LO S E Q U A R T E R B AT T L E C O N F I G U R AT I O N SB a r r e l - 1 1 . 6 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
1 1 . 6 ” B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 3 4 C
PATROLLERSTA C T I C A L C A R B I N E C O N F I G U R AT I O N SB a r r e l - 1 4 . 5 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 3 4 C 4
OPERATORSS P E C I A L F O R C E S W E A P O N C O N F I G U R AT I O N SB a r r e l - 1 5 . 7 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 3 4 C
SNIPERSC U S T O M TA C T I C A L C O N F I G U R AT I O N SB a r r e l - 1 5 . 7 ” H E A V Y o r 2 0 ” R I F L EF i r e C o n t r o l - S E M IG a s S h u t - O f f - O P T I O N A L
1 5 . 7 ” B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 3 4 C 2 0 ” B a s e d o n U p p e r R e c e i v e r P / N 1 3 3 7 1 C
The Configurations shown here are just some examples of what can be achieved with justONE Colt Canada IUR Carbine and a few varied barrel lengths and operationally tailoredaccessories.
NOTE: Sighting and Accessories are sold separately.
5
O R I G I N A L C 8 C A R B I N E SThe C8 carbine became popular with vehicle crews, police and special operations forces due to its short barrel and adjustable stock. It is now employed by Armed Forces and
Police units world-wide as their standard issue battle/patrol rifle. The original gas impingement system in 5.56 mm has been battle proven in harsh combat environments, from
Arctic snow and ice to Desert sands for over 25 years in the C8 configuration and longer for M4 versions. The C8 retained its basic footprint from its American cousin the Colt
M4. Years of development in partnership with the Canadian Armed Forces and a number of engineering changes have made this weapons system distinctly Canadian. One of
many but certainly the most significant development is the cold hammer forged barrel, which gives the C8 a much longer life span than other AR systems. The C8 system can
be custom-configured to meet your operational requirements. Barrel lengths in 10” or 11.6” CQB, 15.7” SFW or 14.5” C8A2, along with the many accessories and sighting
options available can create a weapon system that will be flexible and adaptable to your units small arms requirements. It will certainly be the most popular with your troops.
Speak to a Colt Canada rep about your requirements and options.
COLD HAMMER FORGED
6
FEATURES:
• Reduced length cold hammer-forged heavy barrel
• Flash suppressor
• Bayonet lug
• TRI-AD 1 MIL-STD-1913 accessory mount
• Special carbine chamber and gas system
• Integrated sight rail (Weaver or Picatinny)
• Optional ambidextrous controls
• Single or double sided sling loop
• 4 or 6 position buttstock with non-slip rubber butt pad
P / N 0 7 6 0 6 C - 7
7
FULLY CUSTOMIZABLE C8 CONFIGURATIONSTAILOR YOUR FLEET TO MEET YOUR UNIT’S TACTICAL REQUIREMENTS
C8CQBC LO S E Q U A R T E R B AT T L E C O N F I G U R AT I O N SB a r r e l - 1 0 ” o r 1 1 . 6 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
P / N 0 9 0 3 9 C - 1
C8A2C 8 TA C T I C A L C O N F I G U R AT I O N SB a r r e l - 1 4 . 5 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
P / N 0 7 6 0 6 C - 7
8
SFWS P E C I A L F O R C E S W E A P O N C O N F I G U R AT I O N SB a r r e l - 1 5 . 7 ” H E A V YF i r e C o n t r o l - A U T O o r S E M I
P / N 0 7 6 0 9 C - 7
C8CTC U S T O M TA C T I C A L C O N F I G U R AT I O N SB a r r e l - 1 5 . 7 ” H E A V Y o r 2 0 ” R I F L EF i r e C o n t r o l - S E M IG a s S h u t - O f f - O P T I O N A L
P / N 1 1 0 6 0 C - 1
The Configurations shown here are only some examples of whatcan be achieved with the C8 Carbine system.
Sighting and Accessories are sold separately.
9
CANADIAN RIFLES NEVER DIE - THEY JUST GET UPGRADED
C7A2 U P G R A D E D F R O M C 7 A 1• C U S T O M G R E E N C A M O F U R N I T U R E• A M B I D E X T R O U S C O N T R O L S• C O LT C A N A D A T R I - A D I R A I L A D A P T E R• 4 P O S I T I O N C A R B I N E B U T T S T O C K A S S E M B LY• P I S T O L G R I P B AT T E R Y C O M PA RT M E N T
P / N 9 9 7 8 3 1 7 - 1
C8A3U P G R A D E D F R O M C 8 A 1• 1 6 ” H E A V Y B A R R E L• C U S T O M G R E E N C A M O F U R N I T U R E• A M B I D E X T R O U S C O N T R O L S• C O LT C A N A D A T R I - A D I R A I L A D A P T E R
P / N 0 3 7 6 3 5 3 - 1
UPGRADES TO EXISTING FLEETS
10
C8NLD / C 7N LD / LOAW U P G R A D E D F R O M C 8 A 1 / C 7 A 1 / L S W• I N T E G R AT E D U P P E R R E C E I V E R• F O R W A R D R E C E I V E R E X T E N S I O N F O R R I F L E O N LY• C U S T O M TA N C A M O F U R N I T U R E• A M B I D E X T R O U S C O N T R O L S• F O R W A R D B I P O D G R I P• C U S T O M B U T T S T O C K
C 8 N L D P / N 1 3 2 0 7 C - 1C 7 N L D P / N 1 3 2 0 9 C - 1LO A W P / N 1 3 2 1 8 C - 1
G V M / 1 0U P G R A D E D F R O M C 7 A 1 & C 8 A 1• I N T E G R AT E D U P P E R R E C E I V E R• A M B I D E X T R O U S C O N T R O L S• F O L D I N G F O R W A R D G R I P• C U S T O M P I S T O L G R I P• C U S T O M B U T T S T O C K
P / N 1 3 4 8 6 C - 1
11
E . A . G . L . E . GR ENADE LAUNCHER40mm LOW VELOCITY
The Colt Canada EAGLE is a single shot, side-loading, direct fire grenade launcher that incorporates a double action trigger and features an ambidextrous barrel and controls. The
double-action trigger allows the operator to safely re-strike a misfired cartridge without having to open the breech to re-cock the firing mechanism. The Mark III design has evolved
through extended technical firing and operator testing into a design of reduced overall weight and size, with safety functions similar to the host weapons. The launcher can be quickly
mounted on any weapon (C8/M4, C7/M16 series) that provides a bottom MIL-STD mounting rail with reinforced lug stop. Or, for maximum operational flexibility, it may be equipped
with a stand-alone buttstock. Once mounted the launcher is secured to the rail by two captive, lateral pins. The EAGLE side-loading launcher is uniquely ambidextrous
(pat. pending.) The operator can readily reconfigure the side-opening feed, sight mounting and sling attachment to either the left or right side, without any special tools. As well as
the ability to fire all 40x46mm Low Velocity ammunition, the EAGLE is equipped with a power extractor, which will partially eject spent cartridges when the breech is opened. The
barrel is also provided with a relief on each side that will allow manual extraction. The EAGLE is designed to allow the operator full operational capability from prone, kneeling,
sitting, and standing positions, whether in the stand-alone mode or mounted to the MIL-STD rail of an individual weapon. This design is compatible with all environmental and
NBC equipment.
12
EAGLE FEATURES:
• 40 mm LV ambidextrous side opening barrel
• MIL-STD-1913 accessory rail
• Double-Action XT trigger mechanism
• Ambidextrous controls
• Power extractor
• Versatile mount adapter
• Integral pistol grip
• 400 m ladder sight
P / N 1 1 7 0 2 C
STAND-ALONE ADAPTER FEATURES:
• Integrated sight rail (Weaver or Picatinny)
• Single or double sided sling loop
• 4 or 6 position buttstock with non-slip rubber butt pad
P / N 1 1 8 5 0 C 13
L I G H T S U P P O R T W E A P O N SThe 5.56 mm LSW Light Support Weapon is designed to provide small expeditionary units with a high volume of accurate fire support without increasing the logistical load.
The LSW uses the same ammunition and magazines as the rifle or carbine and operates exactly the same. The high-rate gas system [ large gas tube & hydraulic buffer ] along
with a heavy chrome lined barrel allows for a greater volume of fire without compromising accuracy. The LSW meets or exceeds all applicable military standards including:
reliability in all environmental and operational conditions, accuracy, lethality, maintainability in field conditions, and safety. For those units who must deal with confined space
issues, the LSW is also configured in a carbine version.
SUSTAINED F IRE SUPPORT
14
FEATURES:
• Chrome-lined, hammer-forged, heavy, support barrel
• Flash suppressor
• BI-AD 1 MIL-STD-1913 rail accessory mount
• Heavy duty ventilated handguards
• Integrated sight rail (Weaver or Picatinny)
• Optional ambidextrous controls
• Bipod and pistol grip
• Optional folding carry handle
P / N 1 1 8 5 0 C15
7 . 6 2 m m E L E C T R I C C H A I N G U NThe 7.62 mm Chain Gun System is an electrically operated machine gun for protected weapon stations, AFV turrets, marine and UAV, orhelicopter applications. The chain gun features long dwell time and forward ejection of spent cartridge casings to eliminate residual gasand build-up of spent brass inside a turret or other enclosed spaces. The electrically driven chain drive feeds standard NATO 7.62 mmlinked ammunition to an open bolt system that fires without the need for a gas system, which virtually eliminates stoppages.
The U.S Marine Corps tested the 7.62 mm Chain Gun at the Naval Surface Weapons Centre. The following is a quote from their test report:
LAND - SEA - A IR
HIGH RELIABILITY • GAS FREE OPERATION • EASY MAINTENANCE • FULL NATO INTEROPERABILITY
GUN CONFIGURATION
AIRCRAFT - HINGEDP / N 4 4 5 - 2 0 0 0
VEHICLE MOUNT - SHORT JACKETP / N 4 4 5 - 3 0 0 0
VEHICLE MOUNT - LONG BARRELP / N 4 4 5 - 5 0 0 0
16
TECHNICAL SPECIFICATIONS
Weight Complete Long (H) • 17.86 kg w/shroud (Hinged)Weight Complete Long (FF) • 14.43 kg w/heavy barrel (Flat Front)Weight Complete Short • 13.73 kgWeight Feeder / Receiver • 9.45 kgOverall Length (long) • 1250 mmOverall Length (short) • 660.4 mmWidth • 152 mmHeight • 155 mmSystem of Operation • Externally powered from open boltLocking System • Rotating BoltFeeding Device • Disintegrating LinkEjection • ForwardNormal Rate of Fire • 550 rpmTime to Full Rate • 0.15 secondsPower Required • 0.3 hp (@ 24 vdc)Feed • Linked BeltCooling • AirNominal Operating Voltage • 26.5+/- 3 V dc (maximum)Current • 13 AmperesBarrel Length • 559 mm (4 Grooves, Right Hand)Clearing Method • Open Bolt
Mounted on Tri-Pod Co-axial LAV Mount OWS Mount Door-Gun Mount
From Overhead Weapon Stations to Naval Deck Mounts to Helicopter Mounts, this weapons system can be configured for all applications.
A - Flat Receiver Assembly(with barrel support)
B - Hinged Receiver Assembly
C - Long Barrel Assembly(barrel jacket and barrel assemblyarmoured vehicle assembly)
D - Barrel Assembly (Hinge Type Barrel Assembly with Barrel Support)
E - Standard Barrel Assembly
A
B
C
D
E
CONFIGURATION OPTIONS
17
COLT CANADA FEATURE OPTIONSCOLT CANADA FEATURE OPTIONS
REPAIR & OVERHAUL PROGRAM TECHNICAL PUBLICATIONS SECTION
COLT CANADA SERVICES
O S N
As the 3rd & 4th line service centre for the CanadianForces, Colt Canada has established a world classrepair facility that is experienced in the repair of notonly the small arms that we manufacture, but alsothe repair of over 30 other pieces of equipment fromweapons to mounts, for customers world-wide.
- Official Canadian Forces 3rd & 4th Line Repair Facility
- Weapons Systems Upgrades (eg. CF C7A2 Midlife Upgrade)
- Training Equipment (eg. Cutaway Training Aids)- Current Fleet Repair (eg. Repair direct from OEM)
Please contact us to find out if our services canassist you with your fleet.
For over 30 years Colt Canada (formerly Diemaco) has beenwriting Canadian Forces Technical Orders for DirectorSoldier Systems Program Management to cover all of theCanadian Forces small arms. Some other customersinclude The UK, Denmark, The Netherlands & Norway.
As well as manuals, our Tech Pubs Section also createscourseware for Colt Canada Training Courses and TrainingAids such as posters and multi-media visual displays.
Our Technical Publications Team has created publicationsfor many different countries and is well versed intranslation of diverse languages. Whether you prefer yourdocuments printed, digitally linked PDF's or simple Worddocuments, we can meet your specifications.Please contact our Technical Publications Section for inquires about how we can help with yourtraining needs.
OPTIONSIntegrated Upper ReceiverAutomaticSemi-Auto OnlyThree Round Burst51 cm (20") Chromed Barrel, 1 turn in 7" rifling51 cm (20") Unchromed Match Barrel, 1 turn in 7" rifling51 cm (20") Chromed Heavy Barrel, 1 turn in 7" rifling15.7" Heavy Sleeved Barrel, 1 turn in 7" rifling and Improved Chamber16" Unchromed Match Barrel l, 1 turn in 9" rifling 14.5" Barrel, 1 turn in 7" rifling and Improved Carbine Chamber14.5" Heavy Barrel, 1 turn in 7" rifling and Improved Carbine Chamber10" or 11.6" Heavy Barrel, 1 turn in 7" rifling and Improved Carbine ChamberMIL-STD-1913 Piccatinny Sight RailCanadian Spec Weaver Sight RailTwo Stage Match TriggerAmbidextrous Magazine ReleaseAmbidextrous Fire Selector LeverAmbidextrous Cocking HandleFixed A2 Style Front Sight, Adjustable for elevationFolding Front SightFixed Rifle stock with storage compartmentFour Position Adjustable Butt Stock with Rubber Butt PadA2 Style Flash SuppressorVortex Flash SuppressorBayonet LugBlack or Coloured FurnitureSingle Sided Sling LoopDouble Sided Sling Loop
C7A1OOOOSNNNNNNNOOOOOOSOSNSOSONN
C7A20OOOSNNNNNNNOOOOOOSONSSOSOSO
C7CTONSNNSNNNNNNOOSOOONSSNONNONN
LSWNSNNNNSNNNNNOONOOOSNOSSONOOS
C8A1OOOONNNNNSNNOO0OOOSONSSOSOOS
C8A2OOOONNNNNNSNOO0OOOSONSSOSOOS
C8CTONSNNNNNSNNNOOSOOONSNSONNOOO
SFWOOOONNNSNNNNOO0OOOSONSSOOOOS
CQBOOOONNNNNNNSOONOOOOONSOSNOOS
18
TECHNICAL DATA FOR RIFLES & SUPPORT WEAPONSSPECIFICATIONSCalibreOverall LengthWeight Unloaded, N-ABarrel LengthRifling TwistGroovesSight Radius (with DIS)Cyclic Rate (RPM)Muzzle Velocity (based on C77)Muzzle EnergyTrigger PullChamber
C7A15.56 x 45 mm NATO100 cm (39.6 in)3.31 kg (7.29 lbs)51 cm (20 in)1 turn in 178 mm (7 in)650.2 cm (19.8 in)700-900940 m/s (3100 fps)1765 Joules (1300 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Rifle
C7A25.56 x 45 mm NATO91-100 cm (35.8-36.9 in)3.08 kg (6.79 lbs)51 cm (20 in)1 turn in 178 mm (7 in)650.2 cm (19.8 in)700-900940 m/s (3100 fps)1765 Joules (1300 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Rifle
C7CT5.56 x 45 mm NATOCUSTOMCUSTOM51 cm (20 in)CUSTOM6SCOPEDN/A940 m/s (3100 fps)1765 Joules (1300 ft/lbs)2-2.5 kg (4.5-5.5 lbs)Rifle
LSW5.56 x 45 mm NATO100 cm (39.6 in)5.42 kg (14.5lbs)51 cm (20 in)1 turn in 178 mm (7 in)650.2 cm (19.8 in)600-800940 m/s (3100 fps)1765 Joules (1300 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Rifle
EAGLE40 x 46 mm LV30.1 cm (11.85 in)1.05 kg (2.8 lbs) 21.9 cm (8.63 in)1 turn in 1219 mm (48 in)6114.3 mm (4.5 in)N/A78 m/s (256 fps)600 Joules (443 ft/lbs)8-9 kg (18-20 lbs)40x46 mm LV
CHAIN-GUN7.62 x 51 mm NATO125 cm (4 ft)14.43 kg (31.81 lbs)55.9 cm (22 in)1 turn in 305 mm (12 in)4N/A550880 m/s (2890 fps)3765 Joules (2775 ft lbs)N/A7.62 mm NATO
TECHNICAL DATA FOR CARBINESSPECIFICATIONSCalibreOverall LengthWeight Unloaded, N-ABarrel LengthRifling TwistGroovesSight Radius (with DIS)Cyclic Rate (RPM)Muzzle Velocity (based on C77)Muzzle EnergyTrigger PullChamber
C8A15.56 x 45 mm NATO76-84 cm (30-33.1 in)2.68 kg (7.18 lbs)37 cm (14.5 in)1 turn in 178 mm (7 in)636.7 cm (14.4 in)750-950868 m/s (2850 fps)1514 Joules (1100 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Carbine
C8A25.56 x 45 mm NATO76-84 cm (30-33.1 in)2.81 kg (7.53 lbs)37 cm (14.5 in)1 turn in 178 mm (7 in)636.7 cm (14.4 in)750-950868 m/s (2850 fps)1514 Joules (1100 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Carbine
C8CT5.56 x 45 mm NATOCUSTOMCUSTOMCUSTOM1 turn in 228.6 mm (9 in)6SCOPEDN/A900 m/s (2960 fps)1600 Joules (1200 ft/lbs)2-2.5 (4.5-5.5 lbs)Rifle
SFW5.56 x 45 mm NATO78-88 cm (30.7-34.6 in)2.97 kg (7.96 lbs)41 cm (15.7 in)1 turn in 178 mm (7 in)636.7 cm (14.4 in)750-950895 m/s (2940 fps)1580 Joules (1150 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Carbine
CQB5.56 x 45 mm NATO67-75 cm (26.4-29.5 in)2.68 kg (7.18 lbs)25 cm (10 in)1 turn in 178 mm (7 in)636.7 cm (14.4 in)750-950790 m/s (2600 fps)1245 Joules (900 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Carbine
C8IUR5.56 x 45 mm NATO78-88 cm (30.7-34.6 in)3.27 kg (7.21 lbs)41 cm (15.7 in)1 turn in 178 mm (7 in)636.7 cm (14.4 in)750-950895 m/s (2940 fps)1580 Joules (1150 ft/lbs)2.3-3.9 kg (5-8.5 lbs)Carbine
Colt Canada can provide training courses at many levels with manyobjectives in mind. Our expertise in small arms does not end at our ownline of products. For over 30 years Colt Canada has been the 3rd and 4thline repair facility for the Canadian Forces entire fleet of small arms, as wellas provide CF Armourer's courses. Your courses and courseware can betailored to meet your specific training needs. Speak with our Trainingrepresentatives to find out more information on the courses we offer or tocustomize your courses today.
• OPERATOR INSTRUCTOR COURSES• OPERATOR INSTRUCTOR & TACTICAL MARKSMANSHIP COURSES• ARMOURER’S COURSES
Please see our website www.coltcanada.com under Training Courses forCourse Outlines and Dates, or contact our Training Team for moreinformation.
TRAINING COURSES
19
ACCESSORIESColt Canada does not stop at supplying world class weapon systems to our customers. We also offers a full line of accessories that we have been providing toour customers for over 30 years. Vast experience and expertise accumulated over many years of close interaction with our customers and extensive in-house testing allow us to recommend the right accessories from sighting systems to suppressors to edged weapons. Our engineers & technicians have met many accessory challenges in the past and if we can’t find what you want we have the resources to build it here.
Sighting & Accessories can make all the difference. They can also change the weight and performance of your rifle or carbine. Do not assume that all of these are interchangeable on all weapon platforms. If you are unsure of your needs please contact our sales team directly to help you find the correct solutions to fit your budget and operational requirements.
• Sight ing Systems
• Rai l Systems
• Magazines & Related Equipment
• Cleaning & Associated Equipment
• Train ing Aids & Equipment
• Suppression & Flash E l iminators
• Storage Equipment
• Sl ings
• System Components
• Miscel laneous Tools & Equipment
• Edged Tools & Weapons
20