comandos huawei
TRANSCRIPT
Comandos Cisco Comandos Huawei
>>enable#
no show versionshow logshow interface xxshow ip interface briefsh ip route
ping x.x.x.xtracert x.x.x.x
show running (ram)show config (flash)
clear counters
writereload
show frame-relay pvcsh ip bgp summary
sh policy-map (ver menu)
debug x terminal monitor terminal debug
< > modo user ( no se puede configurar ni rebotear)>system-view[ ] modo system (se puede configurar, no tracea)
undo>display version>display logbuffer>display interface xx>display ip interface brief>display ip routing-table (protocol xx)
>ping –a y.y.y.y (LAN) –c (n° paq.) x.x.x.x (Destino)>tracert –a y.y.y.y (LAN) x.x.x.x (Destino)
>display current-configuration (ram)>display saved-configuration (flash)
>reset counters interface
]save (en modo system view)>reboot
>display fr pvc-info>display bgp peer>display bgp routing (ruteo bgp)
>displ qos policy (ver menu)
>debugging x> terminal monitor >terminal debugging
-MulticastIGMP (mantiene el grupo multicast, protocolo de control)>display igmp interface>display igmp routing-tablePIM-DM (protocolo de ruteo multicast, establece camino)>display pim neighbor
Table 3-13 Displaying the router configurationOperation Command
Display the startup configuration of the router display saved-configurationDisplay the current configuration of the routerdisplay current-configuration [ controller | interfaceinterface-type [ interface-number ] | configuration [ bgp| ospf | post-system | rip | system | user-interface ] ]Display the running configuration in the current view display this
Table 3-14 Saving the current configurationOperation CommandSave the current configuration save [ cfgfile ]
Table 3-15 Erasing the configuration file in the storage devicesOperation CommandErase the configuration file in the storage devices reset saved-configuration
Table 3-16 Configuring the file name of the system software used for the next startupOperation CommandConfigure the file name of the system software usedfor the next startup startup system-software sysfile [ slave-board ]
Table 3-17 Configuring the name of the configuration file used for the next startupOperation CommandConfigure the name of the configuration file used forthe next startup startup saved-configuration cfgfile
Table 3-18 Displaying the information of the file used at startupOperation CommandDisplay the information of the file used at startup display startup
Antes de copiar una nueva configuración en Huawei.
1) reset saved-configuration2) apagar el equipo3) volver a encenderlo4) ingresar en modo SYS y copiar la configuración5) salvar la configuración con save6) verificar configuración con dis cu
interface GigabitEthernet3/0/2
description ACCESO_NODOB_Linea:5663653/4/5_CCOESTE_TE0/4/0/0.29023501 port hybrid pvid vlan 2902 undo port hybrid vlan 1 port hybrid untagged vlan 2902 port vlan-stacking vlan 101 to 200 stack-vlan 2902 port vlan-stacking vlan 3501 stack-vlan 2902 stp disable stp edged-port enable qos pq 5 wrr 0 to 4 6 to 7 qos queue 0 wrr weight 80 qos queue 2 wrr weight 20 undo negotiation auto#