SOLAR PROTECTION RELAYCOMAP MAINSPRO | ABB CM-UFD.M33 | COMAP INTELIPRO PV

Solar Protection Specialist n Australia

BCJ Controls

COMAP MAINSPRO

• The ComAp MainsPro solar protection relay is

used for grid-tie applications, and provides anti-

islanding protection as required by Distribution

Network Service Providers for solar over 30 kW. It

can be used with any embedded generator

systems such as gen sets, co-generation, or

renewable energy sources including photovoltaic

plants or wind turbines. The ComAp MainsPro

grants adjustable voltage, frequency, and loss of

mains functions to safeguard the distribution

network and the generators.

COMAP MAINSPRO

• With ComAp MainsPro, no special knowledge is needed for the installation process

and no additional units are required. This makes it an optimal solution for both

untrained personnel and professionals. The unit is designed to comply

completely with Utilities’ connection requirements and statutory codes, offering a

high level of protection and safety when working in parallel to the mains.

• This item can be used within our secondary protection units which come as a

switchboard ready to connect inverter cabling to. Have a look

ABB CM-UFD.M33

• The ABB CM-UFD.M33 is a multifunctioning grid

feeding monitoring relay. It trips the section switch

that is connected between the distributed

generation and the public grid allowing the

distributed generation to disconnect in case of

problems (e.g. unstable grid), faults, or grid

maintenance. The device provides different

monitoring services to detect 10-minutes average

overvoltage, real time over- and under-voltage as

well as over- and under-frequency. Additionally,

monitoring of vector shift and ROCOF (rate of

change of frequency) can be configured to trip the

generation in a case of loss of mains.

COMAP INTELIPRO PV

• The ComAp IntelliPro PV is a very flexible

interconnection and mains decoupling protective

relay. With its extensive protective functions, it

meets the strictest utility interconnection

requirements and can be used in a large range of

distributed generation applications. This relay

combines standard and optional features to

protect decentralized energy investments. It is an

ideal solution for smart applications due to its

advanced communications, remote monitoring,

and data logging.

SOLAR PROTECTION INSTALLER

BCJ CONTROLS

• BCJ Controls - commercial solar network protection unit - switchboard manufacturing

including protection relay & anti-islanding and zero export devices. BCJ Controls is a

solar technology company set up by ex-utility industrial sparkies. Between them they

have a large amount of experience in electrical grid protection, as well as dealing

with utilities on a day-to-day basis.

• At BCJ Controls we produce Secondary Protection Switchboards with solar protection

relays for Commercial Solar over 30kW grid connections.

CONTACT US:

BCJ Controls

2,17 Lorraine St, Peakhurst NSW Australia 2210

(02) 9534 8465

www.bcjcontrols.com.au