command gamtek
DESCRIPTION
history praktikum gambtekTRANSCRIPT
Customization file loaded successfully. Customization Group: ACAD
Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: ACCOV
Customization file loaded successfully. Customization Group: EXPRESS
Regenerating model.
AutoCAD Express Tools Copyright © 2002-2004 Autodesk, Inc.
; error: bad argument type: lentityp nil
AutoCAD menu utilities loaded.; error: bad argument type: stringp nil
Command: COMMANDLINE
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso Regenerating model.
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.
Command: line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]:
Command:
Command:
Command: *Cancel*
Command: line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: _u
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]:
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
Command:
Command: line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: _u
Specify next point or [Undo]: 1
Specify next point or [Undo]:
Command:
Command:
Command: line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 1
Command: LINE
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]:
Command: line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Command:
Command:
Command:
Command:
Command: _copy 2 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Specify second point or [Exit/Undo] <Exit>:
Command: Specify opposite corner:
Command:
COPY 1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: *Cancel*
Command:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: region
Select objects: Specify opposite corner: 34 found
Select objects: Specify opposite corner: 10 found (2 duplicate), 42 total
Select objects:
14 loops extracted.
14 Regions created.
Command: union
Select objects: Specify opposite corner: 14 found
Select objects:
Command:
Command: extrude
Current wire frame density: ISOLINES=4
Select objects to extrude: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle]: 8
Command: rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Specify rotation angle or [Copy/Reference] <0>: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Specify rotation angle or [Copy/Reference] <0>:
Command: *Cancel*
Command: line
Specify first point:
Specify next point or [Undo]: 30
Specify next point or [Undo]:
Command: Specify opposite corner:
Command:
Command:
Command: _.erase 2 found
Command: line
Specify first point:
Specify next point or [Undo]: 30
Command: Specify opposite corner:
Command: region
Select objects: Specify opposite corner: 1 found
Select objects: 1 found, 2 total
Select objects:
1 closed, degenerate or unsupported object rejected.
All open edges cannot be colinear.
0 loops extracted.
0 Regions created.
Command: revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: Specify opposite corner: 1 found
Select objects to revolve: 1 found, 2 total
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>: 71
Command: _u REVOLVE
Command: _u REGION
Command: Specify opposite corner:
Command:
Command: _.erase 1 found
Command: line
Specify first point:
Specify next point or [Undo]: 32
Specify next point or [Undo]: _u
Specify next point or [Undo]: 30
Specify next point or [Undo]:
Command: region
Select objects: Specify opposite corner: 1 found
Select objects: 1 found, 2 total
Select objects:
1 closed, degenerate or unsupported object rejected.
All open edges cannot be colinear.
0 loops extracted.
0 Regions created.
Command: revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: Specify opposite corner: 1 found
Select objects to revolve: 1 found, 2 total
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>:
Command: _u REVOLVE
Command: revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: Specify opposite corner: 0 found
Select objects to revolve: 1 found
Select objects to revolve: 1 found, 2 total
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>:
Command: _u REVOLVE
Command: revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: 1 found
Select objects to revolve: 1 found, 2 total
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>:
Command: _u REVOLVE
Command: line
Specify first point:
Specify next point or [Undo]: 4
Specify next point or [Undo]: *Cancel*
Command: revolve
Current wire frame density: ISOLINES=4
Select objects to revolve: 1 found
Select objects to revolve: 1 found, 2 total
Select objects to revolve: 1 found, 3 total
Select objects to revolve:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle] <360>: 71
Unable to revolve 1 selected object.
Automatic save to C:\Users\user\AppData\Local\Temp\Drawing1_1_33_0041.sv$ ...
Command:
Command: _.erase 1 found
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: '_.zoom _e
Command: rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Specify rotation angle or [Copy/Reference] <47>: *Cancel*
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: box
Specify first corner or [Center]:
Specify other corner or [Cube/Length]:
Specify height or [2Point] <-2.0000>: 1.4
Command: _u BOX
Command:
U INTELLIZOOM INTELLIZOOM
Command: BOX
Specify first corner or [Center]:
Specify other corner or [Cube/Length]: l
Specify length <8.0000>: 1.4
Specify width <6.0000>: 4
Specify height or [2Point] <1.4000>: 41.6
Command:
Command: line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command: _u LINE
Command: line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Command: region
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects:
1 loop extracted.
1 Region created.
Command: extrude
Current wire frame density: ISOLINES=4
Select objects to extrude: 1 found
Select objects to extrude:
Specify height of extrusion or [Direction/Path/Taper angle] <41.6000>: 1.4
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Automatic save to C:\Users\user\AppData\Local\Temp\Drawing1_1_33_0041.sv$ ...
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
2 found
Specify base point:
Specify rotation angle or [Copy/Reference] <47>: *Cancel*
Command: '_.zoom _e
Command:
Command:
Command:
Command:
Command: _move 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
2 found
Specify base point:
Specify rotation angle or [Copy/Reference] <47>: *Cancel*
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.
Command:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
2 found
Specify base point:
Specify rotation angle or [Copy/Reference] <47>: *Cancel*
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _move 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
2 found
Select an edge or [Chain/Radius]:
Edge has already been picked.
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u FILLET
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u FILLET
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius: 4
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius: 6
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u FILLET
Command: _u Move GROUP
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: fillet
Current settings: Mode = TRIM, Radius = 6.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <6.0000>: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: _u FILLET
Command: _u FILLET
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: 4
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: *Cancel*
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: p
Select 2D polyline: Object selected is not a 2D polyline
Select 2D polyline: Object selected is not a 2D polyline
Select 2D polyline: Select 2D polyline: Object selected is not a 2D polyline
Select 2D polyline: Object selected is not a 2D polyline
Select 2D polyline: *Cancel*
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: r
Requires numeric distance or two points.
Enter fillet radius: 5
Select an edge or [Chain/Radius]:
Edge has already been picked.
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <5.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 INTELLIZOOM
Command:
Command:
Command: _bedit
Command: _u Block Editor
Command: _u GROUP
Command: _u FILLET
Command: _u FILLET
Command: _u FILLET
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: 3
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: 3
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]: r
Enter fillet radius <3.0000>: 2
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]: _u
*Invalid selection*
Expects a point or Chain
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: 3
Select an edge or [Chain/Radius]: r
Enter fillet radius <3.0000>: 3
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: *Cancel*
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: 3
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Automatic save to C:\Users\user\AppData\Local\Temp\gamtek safa_1_33_9169.sv$ ...
Command:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <3.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <3.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u INTELLIZOOM
Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 FILLET
Command: _u FILLET
Command: fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <3.0000>:
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: _u FILLET
Command: fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <3.0000>:
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: FILLET
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <3.0000>:
Select an edge or [Chain/Radius]:
Cannot fillet multiple bodies.
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]: r
Enter fillet radius <3.0000>: _u
Requires numeric distance or two points.
Enter fillet radius <3.0000>: _u
Requires numeric distance or two points.
Enter fillet radius <3.0000>: *Cancel*
2 edge(s) selected for fillet.
No fillet to be computed.
Command: _u FILLET
Command: _u FILLET
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u FILLET
Command:
Command:
Command: _qsave
Command:
Command:
Command: _saveas
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
Edge has already been picked.
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: Specify opposite corner:
Command: _u FILLET
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: Specify second point:
Radius too small. *Invalid*
Enter fillet radius: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: FILLET
Current settings: Mode = TRIM, Radius = 6.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <6.0000>: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Failed to perform blend.
Failure while filleting.
Command: fillet
Current settings: Mode = TRIM, Radius = 6.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel*
Command:
Automatic save to C:\Users\user\AppData\Local\Temp\gamtek safa_1_33_0471.sv$ ...
Command:
Command: fillet
Current settings: Mode = TRIM, Radius = 6.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <6.0000>: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Interference with non adjacent edge while blending.
Failed to perform blend.
Failure while filleting.
Command: FILLET
Current settings: Mode = TRIM, Radius = 6.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <6.0000>: 6
Select an edge or [Chain/Radius]:
Select an edge or [Chain/Radius]:
2 edge(s) selected for fillet.
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]: *Cancel*
Command: CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <3.0000>: 1
Specify height or [2Point/Axis endpoint] <-1.4000>: 4
Command:
Command: _.erase 1 found
Command: CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <1.0000>: d
Specify diameter <2.0000>: 1
Specify height or [2Point/Axis endpoint] <-4.0000>: 4
Command: _u INTELLIZOOM
Command: _u CYLINDER
Command: _u ERASE
Command: _u INTELLIZOOM
Command: _u CYLINDER
Command: _u CYLINDER
Command: _u INTELLIZOOM INTELLIPAN INTELLIZOOM
Command: _u FILLET
Command: _u FILLET
Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command: _u FILLET
Command: _u INTELLIZOOM
Command: _u FILLET
Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command: _u FILLET
Command: _u INTELLIZOOM
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <0.5000>: 1
Specify height or [2Point/Axis endpoint] <-4.0000>: 4
Command:
CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: *Cancel*
Command: union
Select objects: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Command: _u INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIZOOM
INTELLIPAN INTELLIZOOM INTELLIZOOM
Command: _u _CVPORT
Command: _u _CVPORT
Command: _u INTELLIZOOM
Command: _u UNION
Command: *Cancel*
Command: _u INTELLIZOOM
Command:
Command: _.erase 1 found
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius:
Radius too small. *Invalid*
Enter fillet radius: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <1.0000>: 0.5
Specify height or [2Point/Axis endpoint] <-4.0000>: 4
Command:
Command: copy
1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>:
Specify second point or [Exit/Undo] <Exit>:
Command: subtract
Select solids and regions to subtract from ..
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects:
Select solids and regions to subtract ..
Select objects:
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command: subtract
Select solids and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command:
Command: move
1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: *Cancel*
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command: copy
1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>: *Cancel*
Command: copy
Select objects: 1 found
Select objects:
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>:
Specify second point or [Exit/Undo] <Exit>:
Command: '_.zoom _e
Command:
Automatic save to C:\Users\user\AppData\Local\Temp\gamtek safa_1_33_0471.sv$ ...
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command:
QSAVE
Command:
QSAVE
Command:
QSAVE
Command:
Command:
Command: _qsave
Command:
Command:
Command: _saveas
Command:
Command:
Command: _vscurrent
Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _R
Command:
Command: _u INTELLIPAN INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command: _u VSCURRENT GROUP Regenerating model.
Command: fillet
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u FILLET
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: _u FILLET
Command: *Cancel*
Command: *Cancel*
or Autodesk licensed application.
Command: Specify opposite corner:
Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1
Everything has been undone
Command: *Cancel*
Command: *Cancel*
Command: _quit
Command: union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command: fillet
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>:
Select an edge or [Chain/Radius]: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 1
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
Command: *Cancel*
Command: union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects:
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <1.0000>: 4
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 4.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <4.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
FILLET
Current settings: Mode = TRIM, Radius = 4.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <4.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso Regenerating model.
Command: FILLET
Current settings: Mode = TRIM, Radius = 4.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius <4.0000>:
Select an edge or [Chain/Radius]:
1 edge(s) selected for fillet.
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter]: 0.5
Specify height or [2Point/Axis endpoint] <-4.0000>: 9
Command: '_.zoom _e
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _properties
Command: *Cancel*
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Specify rotation angle or [Copy/Reference] <0>:
Command:
Command: move
1 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: subtract
Select solids and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>: *Cancel*
Command: ucs
Current ucs name: *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis]
<World>: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 34.3
Command:
Command: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 3
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 8
Command: _u INTELLIZOOM INTELLIZOOM
Command:
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command:
Command:
Command: _scale 1 found
Specify base point:
Specify scale factor or [Copy/Reference] <1.0000>: *Cancel*
Command: Specify opposite corner: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 8
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 1
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Object selected is not a circle or arc.
Select arc or circle:
Dimension text = 1
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 1
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 1.28
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 1.4
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a circle or arc.
Select arc or circle:
Dimension text = 0.5
Specify dimension line location or [Mtext/Text/Angle]:
Automatic save to C:\Users\user\AppData\Local\Temp\gamtek bengi_1_33_0041.sv$
...
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 29.95
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 31.95
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Dimension text = 8
Specify dimension line location or [Mtext/Text/Angle]:
Command:
Command:
Command: _dimarc
Select arc or polyline arc segment:
Specify arc length dimension location, or [Mtext/Text/Angle/Partial]: *Cancel*
Command:
Command:
Command: _dimangular
Select arc, circle, line, or <specify vertex>:
Specify dimension arc line location or [Mtext/Text/Angle/Quadrant]: *Cancel*
Command: '_.zoom _e
Command: '_dimstyle
Dimension disassociated.
Command: '_dimstyle
Command: _qsave