commander - esco tool · 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm...

esco tool • 75 October Hill Road • Holliston, MA 01746 USA • 1.508.429.4441 • fax 1.508.429.2811 • email: mil[email protected] for Sale or Rent • www.escotool.com24

Commander Model C-134I.D. Clamping Pipe Beveling Tool

3.75” I.D. to 14” O.D.95.25 mm I.D. to 355.6 mm O.D.

Bevels heavy wall pipe and pulls a thick chip without cutting fluids Key Features• One mandrel and seven sets of clamps cover entire tool range• Wide clamps spread the contact force for superior clamping• Three powerful motor choices that are easily switched and interchangeable

with the Dictator - Pneumatic - Electric - Hydraulic

• Dual opposed tapered roller bearing design provide years of trouble free service

• Available off-set gear drive lowers rpm, doubles the torque and enables the cutter blade to pull a thick chip for fast pipe beveling and increased Cutter Blade life.

• Available spring hanger ensures accurate alignment when clamping • Engineered for high performance and low maintenance• Fully portable for on-site use

Precision pipe beveler makes chatter-free bevels for precision weldsDesigned to bevel all schedules of pipe from 3.75” I.D. to 14” O.D., the Commander MILLHOG® Model C-314 features a clamping system that spreads the contact points of the clamps radially inside the pipe. This minimizes vibration for chatter-free end preps on both thin and heavy wall pipe. To assure stable, smooth rotation of the cutterhead, this rugged tool employs dual opposed tapered roller bearings that are easy to adjust and never wear out.

Powerful and versatile, torque at the cutter blade for the Model C-314 is achieved with the choice of three motor options suited to fit your application.

Like all MILLHOG® tools, the Commander MILLHOG® Model C-314 is simple to operate and rugedly designed for years of trouble free service.

The clamping system of the Commander MILLHOG® Model C-314 pipe beveling machine has six contact points that minimize vibration for chatter free bevels on both thin and heavy wall pipe.

Applications• Super alloy pipe beveling• On and off-shore pipeline construction• Petrochemical • Power generation• Systems fabrication• Structural construction

Pneumatic

Electricwith Gear Box

Hydraulic

Hydraulicwith Gear Box

Super Duplex and other high alloy pipe materials can be difficult to bevel at speeds that work well on Carbon Steel and other alloys. The need to reduce the rpm and increase the torque is required for these applications and the Gear Box does just that. It easily and quickly mounts to the Commander and reduces the rpm by half and doubles the torque at the cutter blade.

Pneumaticwith Gear Box

25esco tool • 75 October Hill Road • Holliston, MA 01746 USA • 1.508.429.4441 • fax 1.508.429.2811 • email: [email protected]

Available for Sale or Rent • www.escotool.com

Commander Model C-314I.D. Clamping Pipe Beveling Tool

3.75” I.D. to 14” O.D.95.25 mm I.D. to 355.6 mm O.D.

Commander Clamp rib selector and corresponding spares

Clamp Draw RetentionSet Part # Size (in) Rod Part # Roll Pin Spring Part # Per Pad Set Part # Per Pad Set

C-01 3.750 4.500 95.250 114.300 C-37 3 C-14 C-11 C-12 C-13C-02 4.375 5.250 111.130 133.350 C-37 3 C-14 C-11 C-12 C-13C-03 5.125 6.000 130.180 152.400 C-37 3 C-14 C-11 C-12 C-13C-04 5.875 6.800 149.230 172.720 C-37 3 C-14 C-11 C-12 C-13

C-01 & C-05 6.750 7.562 171.450 192.080 C-37 3 C-14 C-11 C-12 C-13 C-10 6 C-08 18C-02 & C-05 7.437 8.250 188.900 209.550 C-37 3 C-14 C-11 C-12 C-13C-03 & C-05 8.125 8.938 206.380 227.030 C-37 3 C-14 C-11 C-12 C-13C-04 & C-05 8.875 9.700 225.430 246.380 C-37 3 C-14 C-11 C-12 C-13C-01 & C-06 9.687 10.500 246.050 266.700 C-37 3 C-14 C-11 C-12 C-13 C-10 6 C-08 18C-02 & C-06 10.375 11.125 263.530 282.580 C-37 3 C-14 C-11 C-12 C-13C-03 & C-06 11.000 11.812 279.400 300.030 C-37 3 C-14 C-11 C-12 C-13C-04 & C-06 11.750 12.500 298.450 317.500 C-37 3 C-14 C-11 C-12 C-13C-03 & C-07 12.400 13.250 314.960 336.550 C-37 3 C-14 C-11 C-12 C-13 C-10 6 C-08 18C-04 & C-07 13.125 14.000 333.380 355.600 C-37 3 C-14 C-11 C-12 C-13

Clamp Pad Corner Clamp Pad ScrewMandrel, Draw Rod, Actuator, Roll Pins and Retentions Springs and Clamp Pad Corners

I.D. Range Mandrel Actuatorin mm

Commander Clamp Rib Selector and corresponding spares Mandrel, Draw Rod, Actuator, Roll Pin, Retention Springs and Clamp Pad Corners

CommanderTool Post, Blade Locks and Screws

Part # Size Per Tool Part # Per Post Part # Per Post Part # Per LockC-52 4.25 2 C-55 4 C-54 5 C-53 1

* The available third Tool Post is optional

Blade Lock Lock ScrewTool Post Tool Post Screws

Commander Tool Post, Blade Locks and Screws

Specifications: Commander Millhog®Working Range 3.750in (95.25 mm) I.D. to 14in (355.6 mm) O.D.Motor Pneumatic Electric Hydraulic

3 hp (2237 W) 120 V AC 50/60 Hz 1800 W, or 5 hp / 8-12 gpm (30.3-45.4 lt/min)90 psi (6.2 bar) 230 V AC 50/60 Hz 1800 W 5 - 10 gpm @ 1500 psi95 cfm (2690 lt/min) 20 gallon reservoir

Speed 24 rpm 13 rpm - 45 rpm 1 rpm - 22 rpmSpeed with Off-Set Gear Reducer 12 rpm with gear reducer 6.5 rpm - 22.5 rpm 1 rpm - 11 rpmMinimum Clearance 11.50in (323.9 mm) 11.50in (323.9 mm) 11.50in (323.9 mm)Head Length 26in (660.4 mm) 26in (660.4 mm) 26in (660.4 mm)Working Weight 89 lbs (40.4 kg) 91 lbs (41.3 kg) 93 lbs (42.2 kg)Shipping Weight 200 lbs (91 kg) 202 lbs (92kg) 204 lbs (93kg)Shipping Dimensions 32in x 15in x 17in 32in x 15in x 17in 32in x 15in x 17in

813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm

Specifications: Commander

Mandrel, Roll Pin, Actuator and Draw Rod C-37, C-12, C-11 and C-14.

Clamp System Features• Only 7 sets of clamps for entire range• All clamps work on one Mandrel• Clamp Pads have replaceable corners• All key clamping components, including Draw

Rod are heat treated.

Clamps spread force for rock solid stabilityThe Commander MILLHOG® Clamp Ribs combined with Clamp Pads achieve a huge I.D. range of 3.75” to 14” with only 7 sets of clamps that all work on the same Mandrel. The Clamp Pads are V shaped to spread the clamping force radially inside the pipe for rock solid stability and have heat treated and hardened replaceable steel corners that are easy and economical to change when worn.

Commander and Dictator MILLHOG® motors are interchangeable and switching is easily accomplished with a simple hex key.

Replacement Clamp Pad Corners and Screws C-10 and C-08 are used with Clamp Pad sets C-05, C-06 and C-07.

Clamp Rib Sets,C-01, C-02, C-03 and C-04, Clamp Pad Sets C-05, C-06 and C-07 and Retention Spring C-10.

Tool Post and Tool Post screws C-52 and C-55.

The Commander MILLHOG® is equipped with two Tool Posts and a third Tool Post can be added as an option. All Tool Posts are interchangeable and share the same screws and wedges.

Blade Lock Screw and Blade Lock C-53 and C-54.

commander - esco tool · 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm...

Documents

Advisor Advanced Gebruikershandleiding - elva.be · ATS1000A-MM Metaal 315 x 388 x 85 mm 1 A ATS1000A-MM-IP Metaal 315 x 388 x 85 mm 1 A ATS2000A-MM Metaal 315 x 388 x 85 mm 2 A ATS2000A-MM-IP

2001Preisliste Nr. 20 vom 1.10.2016 TVP Media Kit 2017 90 x 267 mm (Satzspiegel) 100 x 297 mm 70 x 297 mm + 3 mm Beschnitt 60 x 267 mm 60 x 130 mm (Satzspiegel) 1/8 quer 190 x 32 mm

CIJEVOVODI ZA 73(:;0A50...20 x 4 mm 6000 mm 0,544 20 x 5 mm 6000 mm 0,638 21 x 3 mm 6000 mm 0,459 22 x 1 mm 6000 mm 0,179 22 x 1,5 mm 6000 mm 0,261 22 x 2 mm 6000 mm 0,340 EN AW-6060

245 x 56 mm 40 x 420 mm miter saw - Peugeot Outillage...ATELIER WORKSHOP ENERGYHUB ENERGHUB 14 TPI 1,8 mm 400 x 105 mm 45 x 550 mm 18 TPI 1,4 mm 245 x 56 mm 40 x 420 mm 18 TPI 1,8

PALLADIO · Cod. 520569 495 x 300 x 515 mm Cod. 520589 590 x 330 x 550 mm Cod. 52057811 490 x 300 x 640 mm Cod. 52059817 590 x 330 x 690 mm Cod. 52057869 490 x 300 x 640 mm

com .pauli. www en auli Nachricht St. · ST.PAULI NACHRICHTEN oder PFIFF MAGAZIN 190 mm x 274 mm 215 mm x 310 mm 190 mm x 137 mm 90 mm x 274 mm 90 mm x 137 mm 45 mm x 137 mm * bei

FICHE TECHNIQUE FLEXIBLES 144W · courant max bobine 1,1 a1,1 a1,1a 1,1 1,1 1,1a 1,1a ... epaisseur x largeur 4 mm x 14,4 mm 4 mm x 14,4 mm4 mm x 14,4 mm4 mm x 14,4 mm 4 mm x 14,4

X X X X X X X X X X X.../ mm B vnitřní výška nádrže / mm C vnitřní šířka nádrže / mm D průměr revizního komínu / mm E výška revizního komínu / mm F výška ode

Matches Lighters Paperbags - rsw-muenchen.de · 2 MATCHES 9507 55 mm x 27 mm x 7 mm, approx. 8 pcs /cont. 9512 55 mm x 35 mm x 9 mm, approx. 20 pcs /cont. 9613 56 mm x 36 mm x 8 mm,

Datenformat: (XXX mm + 30 mm) x (XXX mm + 130 mm ... · Hohlsaum für Ausleger Beispielsichtmaß 120 mm Datenformat: (XXX mm + 30 mm) x (XXX mm + 130 mm) Beispiel: 1430 mm x 640 mm

GERFLOR USA EVERY RECREATION PRODUCT FEATURES: FOR …€¦ · EVERY RECREATION PRODUCT FEATURES: Where Champions Play ™ 30 mm x 110 mm 30 mm x 90 mm 30 mm x 70 mm 30 mm x 50 mm

SISTEMA PARA ESCENARIOS STAGETEK®€¦ · • Altura de patas fijas: 203 mm, 406 mm, 610 mm, 813 mm, 1016 mm y tamaños personalizados disponibles ... formado por cuatro patas con

EISBAER - Alphacool · Maße: 316 mm x 144 mm x 30 mm ST30 360 Maße: 397 mm x 124 mm x 30 mm ST30 420 Maße: 459 mm x 144 mm x 30 mm SCHNELLVERSCHLUSS Kompatibilität: 11/8 mm Schläuche

90 - Reply tool · 2018-01-28 · 2 3 350 mm 499 mm 912 mm 780 mm 530 x 350 x 80 mm 530 x 350 x 120 mm 530 x 350 x 165 mm 350 mm 499 mm 912 mm 780 mm 530 x 350 x 80 mm 530 x 350 x

0m023(5+094( : :;,43,9 =,0m0230 - Aluprofil · A x B x S Uzunluk kg/m 20 x 20 x 1,5 mm 6000 mm 0,300 20 x 20 x 2 mm 6000 mm 0,389 20 x 20 x 2,5 mm 6000 mm 0,473 20 x 20 x 3 mm 6000

Auszug Tischprogramm - Celton Tischprogr.pdf · Executive Schreibtisch mit Korpus B496, LxBxH: 2040 x 810 x 735 mm mit Sideboard 1525 x 396 x 813 mm in Anthrazit Uni Dekor seidenmatt,

SCHEDA TECNICA MODELLO MAGIA - IANUS Porte€¦ · magnetica. Bordatura su 3 lati. Finitura in laminato o laccato. Misure standard 2103 x 613-713-813-913 mm, spessore 44 mm. Ianus

BUTT WELD FITTINGS GROEP 2 - HOLLIMEX · 1 1/2" 38,1 x 1,50 mm 2" 50,8 x 1,50 mm 2 1/2" 63,5 x 1,50 mm 3" 76,1 x 1,50 mm 4" 26,9 x 1,60 mm 4" 26,9 x 2,00 mm 25,4 x 1,25 mm 31,8 x

Specificatii tehnice buldoexcavator CASE 695 ST...Specificatii tehnice buldoexcavator CASE 695 ST. 2693 mm 2685 mm 813 mm 830 mm 3458 mm 3460 mm 4405 mm 4250 mm 125 mm 120 mm 43°

Advisor Advanced Manager Handleiding - … · ATS1000A-MM Metaal 315 x 388 x 85 mm 1 A ATS1000A-MM-IP Metaal 315 x 388 x 85 mm 1 A ATS2000A-MM Metaal 315 x 388 x 85 mm 2 A ATS2000A-MM-IP

Intensive Care and Transport Ventilator Solutions ICU... · Dimensions: 336 mm x 330 mm x 345 mm (L x W x H): 664 mm x 600 mm x 1370 mm (with trolley) Weight: Approximately 9.5 kg,

Microban® is a registered trademark of the Microban ... · 4 Printer Line 10 x 27 mm 14 x 38 mm 18 x 47 mm 23 x 59 mm 30 x 69 mm 37 x 76 mm Printer 20 size of imprint 14 x 38 mm

SV SlimLine 2016 - AmbaFlex · 2019. 5. 9. · SVe 800 2560 mm square 700 mm 1 x 300, 1 x 400 mm 800 mm 1 x 600, 1 x 200 mm 900 mm 3 x 300 mm 1000 mm 1000 mm 2 x 500 mm 3 x 400 mm

Listekatalog · 2019. 5. 16. · 125 4 x 12 mm Skilleliste (forkantliste) 126 x 16 mm 127 x 19 mm 128 5 x 22 mm 129 5 x 19 mm Forkant m/ 1 runding 130 5 x 16 mm 132 x 21 mm * 134

Art. no. 1838 • 2006/06 · 2009. 4. 2. · 16 32 mm 50 mm 40 x 60 mm 34 x 54 mm 35 x 50 mm 50 x 50 mm 40 x 90 mm 50 x 90 mm 50 x 100 mm 50 x 100 mm 80 x 130 mm 80 x 130 mm WäHLEN

Certificate No. 845BS-0016 rev,l File No. PB10394 Danish ... · 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm Gas Group 3 B/P Comments Injector Diameter 1.50

ozgeklima.com.trozgeklima.com.tr/katalog/2016-ozge.pdf · Neopren Conta (Eva Conta) 3 mm x 15 mm x 10 metre 0,250 ₺/mt 3 mm x 20 mm x 10 metre 0,250 ₺/mt 5 mm x 15 mm x 10 metre

Herstellerverzeichnis - Gütegemeinschaft Kupferrohr e.V. · 5040 / 45° - Bogen i-a 12. mm x. 15 mm. x 18. mm x. 22 mm. x 28. mm x. 35 mm. x 42. mm x. 54 mm. x 5041 / 45° - Bogen

TIMELESSS... · // timeless silver m89111rt 897 x 897 mm m16612rt 597 x 597 mm rt m16612 597 x 597 mm black m89109rt 897 x 897 mm m16610rt 597 x 597 mm rt m16610 597 x 597 mm

ferro battuto - SIDERSERVferro battuto. Art. 1658/1. 16 x 8 mm. Art. 1658/2. 16 x 8 mm. Art. 1657/1. 16 x 8 mm 400 x 410 mm. Art. 1657/4. 16 x 8 mm 400 x 575 mm 580 x 440 mm 620 x

Pricelist 2014 - Megasun · 4 Pricelist 2014 mega S un 5 opened 2,200 mm x 1,440 mm x 1,710 mm (length x width x height) opened with sound system* 2,330 mm x 1,440 mm x 1,710 mm

Melodia - Evoca Group · Melodia). Caratteristiche Melodia Melodia SL Altezza 1700 mm 1700 mm Larghezza 717 mm 624 mm Profondità 813 mm 813 mm Profondità con porta aperta 1358 mm

Professionele laserprinters van Dell · 640 mm B x 665 mm D x 399 mm H 66 kg 560 mm B x 506 mm D x 432 mm H 45 kg 400 mm B x 504 mm D x 470 mm H 25,3 kg 400 mm B x 406 mm D x 412,8

Voorraadprogramma WOW - Cras Woodshops · Triple Parallel Ventilatten 1 27 x 55 mm 45 x 55 mm 27 x 54 mm 37 x 54 mm 40 x 54 mm 27 x 65 mm parallel ‘large’ 33 x 133 mm 21 x 133

Spacia Collection | Wood€¦ · 3/8” x 36” (9.5 mm x 914.4 mm) 1/4” x 36” (6.4 mm x 914.4 mm) 1/8” x 36” (3.2 mm x 914.4 mm) PB Left Introducing an advancement in our