commercial doors sectional and steel...
TRANSCRIPT
Effective January 1, 2016 CMWC1 REHD-PPCOMMW1W8-11
COMMERCIAL DOORS
s e c t i o n a l a n d s t e e l r o l l - u p
DIY RETAIL PRICING
Model Shown: 524
Contents:Commercial Sectional Product Specs and Pricing Premium Series – Model 3720 W1–W6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CMWC1–CMWC5 Value Plus Series – Model 524V W1–W6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CMWC6–CMWC10 Value Series – Model 524 W1–W8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CMWC11–CMWC16Commercial Track/Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CMWC17Commercial Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CMWC18Commercial Roll-Up Product Specs and Pricing Heavy Duty – Model 160C W6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CMWC19 Light Duty – Model 150C W3–W8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CMWC20
COMMERCIAL GARAGE DOORS
Effective January 1, 2016 CMWC1 REHD-PPCOMMW1W8-11
COMMERCIAL SECTIONALGARAGE DOORS PRODUCT information
Model 37202" Insulated Micro-grooved Rib Flush Panel
PANEL OPTIONS
COLORS
WINDOWS
APPLICATIONS
WARRANTIES
Flush with Micro-grooved Rib
• Windows available for additional charge• Insulated windows available • Not available in all sizes or WindCode® ratings .
• Due to the nature of the product, we strongly recommend that you have your commercial door professionally installed
• Commercial operators are available for commercial applications only
• Contact Clopay for a special installation quote
TORSION SPRING AND COMMERCIAL OPERATOR WARNINGFor safety reasons, Clopay does not recommend the installation oftorsion springs or commercial operators by anyone other than atrained and experienced professional installer or contractor usingspecialized tools. Clopay disclaims any and all liability, includingany obligation or liability under indemnification agreements withdistributors or retailers, for death, personal injury, expense orproperty damage incurred by consumers who attempt to install torsion springs or commercial operators.
NOTES
24" x 8" Full Vision
WARRANTY
10 YRL I M I T E D
CONSTRUCTION
Used when maximum energy efficiency is needed .• Outbuildings • Warehouses• Pole Barns • Recreational Facilities• Workshops
PREMIUM c o m m e r c i a lW1 – W6
• Stucco embossed exterior and interior steel skins with micro-grooved ribs .
• Durable rust-resistant Tog-L-Loc® construction eliminates rivets and welds .
• 2" thick 3-layer construction (steel + Intellicore® polyurethane insulation + steel) .
• 2" Intellicore® polyurethane insulation provides a 18 .4 R-value* . Calculated door section R-value is in accordance with DASMA TDS-163 .
• Flush stucco embossed exterior steel with light ribbed pattern .
• Flush stucco embossed interior steel (baked-on white finish) .
• 10,000 cycle torsion spring counterbalance (EZ-SET® not available) .
• Inside slide lock comes standard .
• Struts as required .
• Prepunched holes for hinge attachment .
• 2" angle mounted track .
• Available in heights from 5'3" to 18' in 3" increments .
• W1 models available in 2" increments from 6' to 24'2" wide .
• W4 models available in 2" increments from 6' to 14'2" wide .
• W5 models available in 2" increments from 6' to 14'2" wide .
• W6 models available in 2" increments from 6' to 14'2" wide .
• Approved drawings available at FloridaBuilding .org .
• For proper WindCode® ratings, see General Information tab .
• Doors ordered in white unless a color is specified .
NOTE: For W6–W8 doors, door openings 9'2" or wider, sections must be 2" wider than opening.
SIZES
STANDARD HEADROOM REQUIREMENTS2" Track 3" Track
16" 18"*More headroom required for doors with 6" ID spring
Low Headroom:• Front mount: 10" minimum, 1000 lb . maximum .• Rear mount: 7" minimum, 750 lb . maximum .
Vertical lift: door height + 12"High lift: above 16"Follow-the-roof slope: 16"
Double shaft may be required on doors with vertical lift, high lift, follow-the-roof and/or high cycle springs . This will require additional headroom – consult the factory .
SPECIAL NOTES
PRODUCT SPECIFICATIONS
3-LAYER CONSTRUCTION
18.4R-VALUE*
2" insulation
1. Steel2. Insulation3. Steel
StandardWhite
GlacierWhite
Chocolate MochaBrown
Shown: Model 3720 with 24" x 8" windows
Effective January 1, 2016 CMWC2 REHD-PPCOMMW1W8-11
WINDOW PRICESGlazing OptionsGlazed with: 24" x 8" 1/2" Insulated each 65 .00 1/2" Insulated Tempered each 75 .00 1/4" Wire Reinforced each 54 .00
High Altitude Insulated Glass (add to above) 18 .00
Maximum window sections per door(No lites in bottom section)
No limit
Full Vision (per ft. of width) 1/8" DSB 25 .00 1/8" Acrylic (Plexiglas®) 41 .00 1/8" DSB Tempered 36 .00 1/4" Tempered Glass 37 .00 1/2" Insulated 45 .00 1/2" Insulated Tempered 70 .00High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Models HDP20 / HDPL20 / HDPF20Model 37202" Insulated Micro-grooved Rib Flush Panel
DIY Retail Pricing
Door WidthDoor Height
Up to 8'4 Section
8'3"–9'5 Section
9'3"–10'5 Section
10'3"–11'6 Section
11'3"–12'6 Section
12'3"–13'7 Section
13'3"–14'7 Section
14'3"–15'8 Section
15'3"–16'8 Section
Up to 8'2" 752 871 942 1123 1123 1318 1318 1531 15318'4" to 9'2" 804 929 1011 1191 1191 1416 1416 1642 16429'4" to 10'2" 872 1007 1154 1351 1351 1595 1595 1845 184510'4" to 11'2" 985 1135 1289 1504 1504 1767 1767 2161 216111'4" to 12'2" 985 1135 1289 1504 1504 1767 1767 2161 216112'4" to 13'2" 1065 1233 1399 1638 1638 1944 1944 2478 247813'4" to 14'2" 1094 1286 1453 1693 1693 2023 2023 2558 255814'4" to 15'2" 1294 1540 1715 2019 2019 2523 2523 2888 288815'4" to 16'2" 1294 1540 1715 2019 2019 2523 2523 2888 288816'4" to 17'2" 1480 1718 1901 2271 2271 2775 2775 3130 313017'4" to 18'2" 1480 1718 1901 2271 2271 2775 2775 3130 313018'4" to 19'2" 1699 1925 2218 2631 2631 3002 3002 3397 339719'4" to 20'2" 1699 1925 2218 2631 2631 3002 3002 3397 3397
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 2" increments from 6' to 24'2" wide . Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
W1 • Design Pressure: 12.5 PSF (min), Test Pressure: 19 PSF (min)• W1 – 90 MPH Exposure B design wind speed• Per International Building Code (ASCE7 with 50% safety factor) • Approved drawings available at clopay.com
W1 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
PREMIUM c o m m e r c i a l
WARMER. QUIETER. STRONGER.Garage doors featuring Intellicore® insulation technology represent the ultimate smart choice for homeowners. Clopay’s Intellicore is a proprietary polyurethane foam that is injected into a garage door, expanding to fill the entire structure. The result is a door with incredible strength and durability. Its dense insulation also produces a quieter door, while its industry-leading R-values (up to 18.4) provide year-round comfort and improved energy efficiency.
WARMEREnergy efficiency provides year-round comfort
STRONGEREnhanced strength resists everyday wear and tear
QUIETERDense insulation reduces noise by up to 16 decibels
Look for the Intellicore® icon throughout this brochure on select door models.
DOOR PRICES
Effective January 1, 2016 CMWC3 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 8'4 Section
8'3"–9'5 Section
9'3"–10'5 Section
10'3"–11'6 Section
11'3"–12'6 Section
12'3"–13'7 Section
13'3"–14'7 Section
14'3"–15'8 Section
15'3"–16'8 Section
Up to 8'2" 736 857 929 1112 1112 1311 1311 1480 1480
8'4" to 9'2" 789 917 999 1182 1182 1410 1410 1593 1593
9'4" to 10'2" 859 996 1143 1343 1343 1591 1591 1845 1845
10'4" to 11'2" 1038 1211 1363 1598 1598 1880 1880 2287 2287
11'4" to 12'2" 1038 1211 1363 1598 1598 1880 1880 2287 2287
12'4" to 13'2" 1173 1377 1540 1813 1813 2192 2192 2834 2834
13'4" to 14'2" 1173 1377 1540 1813 1813 2192 2192 2834 2834
Bold Prices = 1" solid shaft standard Available in 2" increments from 6' to 14'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
DOOR PRICES
Glazing Options
Glazed with: 24" x 8"
1/2" Insulated each 65 .00
1/2" Insulated Tempered each 75 .00
1/4" Wire Reinforced each 54 .00
High Altitude Insulated Glass (add to above) 18 .00
Maximum window sections per door(No lites in bottom section)
No limit
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
1/4" Tempered Glass 37 .00
1/2" Insulated 45 .00
1/2" Insulated Tempered 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Models HDP20 / HDPL20 / HDPF20
DIY Retail Pricing
• Design Pressure: 28 PSF (min)• Test Pressure: 42 PSF (min)• 120 MPH Exposure B design wind speed • 110 MPH Exposure C design wind speed (one story)• 100 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor)• Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W4 WINDCODE® FEATURES: W4 Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Model 37202" Insulated Micro-grooved Rib Flush Panel
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
PREMIUM c o m m e r c i a l
WINDOW PRICES
Effective January 1, 2016 CMWC4 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 8'4 Section
8'3"–9'5 Section
9'3"–10'5 Section
10'3"–11'6 Section
11'3"–12'6 Section
12'3"–13'7 Section
13'3"–14'7 Section
14'3"–15'8 Section
15'3"–16'8 Section
Up to 8'2" 747 869 941 1128 1128 1329 1329 1500 1500
8'4" to 9'2" 800 929 1012 1199 1199 1430 1430 1671 1671
9'4" to 10'2" 871 1010 1158 1361 1361 1613 1613 1871 1871
10'4" to 11'2" 1038 1211 1363 1598 1598 1880 1880 2287 2287
11'4" to 12'2" 1038 1211 1363 1598 1598 1880 1880 2287 2287
12'4" to 13'2" 1173 1377 1540 1813 1813 2192 2192 2834 2834
13'4" to 14'2" 1173 1377 1540 1813 1813 2192 2192 2834 2834
Bold Prices = 1" solid shaft standard Available in 2" increments from 6' to 14'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
DOOR PRICES
Glazing Options
Glazed with: 24" x 8"
1/2" Insulated each 65 .00
1/2" Insulated Tempered each 75 .00
1/4" Wire Reinforced each 54 .00
High Altitude Insulated Glass (add to above) 18 .00
Maximum window sections per door(No lites in bottom section)
No limit
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
1/4" Tempered Glass 37 .00
1/2" Insulated 45 .00
1/2" Insulated Tempered 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Models HDP20 / HDPL20 / HDPF20
DIY Retail Pricing
W5• Design Pressure: 30 PSF (min)• Test Pressure: 45 PSF (min)• 130 MPH Exposure B design wind speed • 120 MPH Exposure C design wind speed (one story)• 110 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W5 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Model 37202" Insulated Micro-grooved Rib Flush Panel
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
PREMIUM c o m m e r c i a l
WINDOW PRICES
Effective January 1, 2016 CMWC5 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 8'4 Section
8'3"–9'5 Section
9'3"–10'5 Section
10'3"–11'6 Section
11'3"–12'6 Section
12'3"–13'7 Section
13'3"–14'7 Section
14'3"–15'8 Section
15'3"–16'8 Section
Up to 8'2" 747 869 941 1128 1128 1329 1329 1500 1500
8'4" to 9'2" 800 929 1012 1199 1199 1430 1430 1671 1671
9'4" to 10'2" 871 1010 1158 1361 1361 1613 1613 1871 1871
10'4" to 11'2" 1053 1229 1381 1620 1620 1907 1907 2274 2274
11'4" to 12'2" 1053 1229 1381 1620 1620 1907 1907 2274 2274
12'4" to 13'2" 1190 1397 1562 1839 1839 2224 2224 2830 2830
13'4" to 14'2" 1190 1397 1562 1839 1839 2224 2224 2830 2830
Bold Prices = 1" solid shaft standardAvailable in 2" increments from 6' to 14'2" wide . Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
DOOR PRICES
Glazing Options
Glazed with: 24" x 8"
1/2" Insulated each 65 .00
1/2" Insulated Tempered each 75 .00
1/4" Wire Reinforced each 54 .00
High Altitude Insulated Glass (add to above) 18 .00
Maximum window sections per door(No lites in bottom section)
No limit
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
1/4" Tempered Glass 37 .00
1/2" Insulated 45 .00
1/2" Insulated Tempered 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Models HDP20 / HDPL20 / HDPF20
• Design Pressure: 37 PSF (min) • Test Pressure: 55 PSF (min) • 140 MPH Exposure B design wind speed • 130 MPH Exposure C design wind speed (one story) • 120 MPH Exposure C design wind speed (two story) • Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission • Approved drawings available at FloridaBuilding.org
W6 WINDCODE® FEATURES: W6Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Model 37202" Insulated Micro-grooved Rib Flush Panel
DIY Retail Pricing
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
PREMIUM c o m m e r c i a l
WINDOW PRICES
Effective January 1, 2016 CMWC6 REHD-PPCOMMW1W8-11
• 24 gauge smooth exterior finish with deep ribbed pattern .
• Durable rust-resistant Tog-L-Loc® construction eliminates rivets and welds .
• 2" thick 2-layer vinyl back construction .
• 13/8" polystyrene insulation provides a 6 .5 R-value . Calculated door section R-value is in accordance with DASMA TDS-163 .
• 10,000 cycle torsion spring counterbalance (EZ-SET® not available) .
• Inside slide lock comes standard .
• All sections solid .
• Struts as required .
• Easy hardware attachment through prepunched stiles .
• 2" angle mounted track .
• Available in heights from 5'3" to 18' in 3" increments .
• W1 models available in 2" increments from 4' to 24'2" wide .
• W4 models available in 2" increments from 4' to 16'2" wide .
• W5 models available in 2" increments from 4' to 16'2" wide .
• W6 models available in 2" increments from 4' to 14'2" wide .
• Approved drawings available at FloridaBuilding .org .
• For proper WindCode® ratings, see General Information tab .
• Doors ordered in white unless a color is specified .
NOTE: For W6–W8 doors, door openings 9'2" or wider, sections must be 2" wider than opening.
PRODUCT SPECIFICATIONS
SIZES
SPECIAL NOTES
STANDARD HEADROOM REQUIREMENTS2" Track 3" Track
16" 18"*More headroom required for doors with 6" ID spring
Low Headroom:• Front mount: 10" minimum, 1000 lb . maximum .• Rear mount: 7" minimum, 750 lb . maximum .
Vertical lift: door height + 12"High lift: above 16"Follow-the-roof slope: 16"
Double shaft may be required on doors with vertical lift, high lift, follow-the-roof and/or high cycle springs . This will require 12" additional headroom – consult the factory .
PRODUCT information
Model 524VInsulated Deep Rib Flush Panel
VALUE PLUS c o m m e r c i a lW1 – W6
PANEL OPTIONS
WINDOWS
APPLICATIONS
WARRANTIES
Deep Rib Panel
• Windows available for additional charge• Not available in all sizes or WindCode® ratings .
NOTES
24" x 6" Full Vision
WARRANTY
10 YRL I M I T E D
CONSTRUCTION
• Due to the nature of the product, we strongly recommend that you have your commercial door professionally installed
• Commercial operators are available for commercial applications only
• Contact Clopay for a special installation quote
TORSION SPRING AND COMMERCIAL OPERATOR WARNINGFor safety reasons, Clopay does not recommend the installation oftorsion springs or commercial operators by anyone other than atrained and experienced professional installer or contractor usingspecialized tools. Clopay disclaims any and all liability, includingany obligation or liability under indemnification agreements withdistributors or retailers, for death, personal injury, expense orproperty damage incurred by consumers who attempt to install torsion springs or commercial operators.
Used when value and reliability are required .• Pole Barns • Farm Machinery Sheds• Warehouses • Storage Sheds
COMMERCIAL SECTIONALGARAGE DOORS
2-LAYER CONSTRUCTION
6.5R-VALUE*
13/8" insulation
1. Steel2. Insulation
Shown: Model 524V with 24" x 6" windows
COLORS
StandardWhite
Chocolate
Effective January 1, 2016 CMWC7 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 453 453 500 566 634 670 752 787 847 884
8'4" to 9'2" 474 474 528 599 668 707 792 830 896 934
9'4" to 10'2" 502 502 559 695 765 806 898 944 1005 1048
10'4" to 11'2" 747 747 839 994 1112 1171 1308 1372 1480 1529
11'4" to 12'2" 789 789 888 1046 1170 1232 1379 1445 1560 1628
12'4" to 13'2" 842 842 948 1108 1243 1316 1467 1529 1684 1751
13'4" to 14'2" 865 865 973 1131 1274 1350 1505 1579 1727 1804
14'4" to 15'2" 1017 1017 1137 1323 1471 1553 1762 1846 2011 2102
15'4" to 16'2" 1051 1051 1174 1365 1516 1587 1824 1915 2137 2225
16'4" to 17'2" 1183 1183 1385 1574 1722 1812 2077 2182 2629 2730
17'4" to 18'2" 1211 1211 1416 1608 1768 1872 2137 2248 2706 2816
18'4" to 19'2" 1364 1364 1570 1711 1910 2024 2263 2423 2920 3122
19'4" to 20'2" 1410 1410 1645 1806 1977 2092 2471 2712 3040 3220
DOOR PRICES
Glazing Options
Glazed with: 24" x 6"
1/2" Insulated each 45 .00
1/2" Tempered Insulated each 55 .00
High Altitude Insulated Glass (add to above) 18 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/2" Insulated Glass 45 .00
1/2" Insulated Tempered Glass 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 1" increments from 4' to 24'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
• Design Pressure: 12.5 PSF (min), Test Pressure: 19 PSF (min)• W1 – 90 MPH Exposure B design wind speed• Per International Building Code (ASCE7 with 50% safety factor) • Approved drawings available at clopay.com
W1 WINDCODE® FEATURES: W1 Must Specify WINDCODE®
Rating When Ordering
Models HDP20 / HDPL20 / HDPF20Model 524VInsulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE PLUS c o m m e r c i a l
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
WINDOW PRICES
Effective January 1, 2016 CMWC8 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 499 499 550 622 698 739 825 866 934 978
8'4" to 9'2" 520 520 583 655 731 775 869 908 981 1027
9'4" to 10'2" 554 554 615 758 837 885 979 1034 1102 1153
10'4" to 11'2" 809 809 903 1073 1191 1266 1404 1482 1591 1655
11'4" to 12'2" 855 855 955 1128 1253 1332 1480 1560 1677 1739
12'4" to 13'2" 1020 1020 1139 1330 1480 1583 1748 1839 1989 2087
13'4" to 14'2" 1110 1110 1239 1436 1603 1717 1894 1990 2157 2273
14'4" to 15'2" 1149 1149 1285 1491 1652 1751 1977 2078 2260 2367
15'4" to 16'2" 1171 1171 1309 1515 1681 1767 2020 2126 2414 2514
DOOR PRICES
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/2" Insulated each 45 .00
1/2" Tempered Insulated each 55 .00
High Altitude Insulated Glass (add to above) 18 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/2" Insulated Glass 45 .00
1/2" Insulated Tempered Glass 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Bold Prices = 1" solid shaft standard Available in 1" increments from 4' to 16'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
Models HDP20 / HDPL20 / HDPF20Model 524VInsulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE PLUS c o m m e r c i a l
W4• Design Pressure: 28 PSF (min)• Test Pressure: 42 PSF (min)• 120 MPH Exposure B design wind speed • 110 MPH Exposure C design wind speed (one story)• 100 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor)• Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W4 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC9 REHD-PPCOMMW1W8-11
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 499 499 550 622 698 739 825 866 934 978
8'4" to 9'2" 520 520 583 655 731 775 869 908 981 1027
9'4" to 10'2" 554 554 615 758 837 885 979 1034 1102 1153
10'4" to 11'2" 809 809 903 1073 1191 1266 1404 1482 1591 1655
11'4" to 12'2" 855 855 955 1128 1253 1332 1480 1560 1677 1739
12'4" to 13'2" 1130 1130 1262 1461 1631 1747 1927 2026 2196 2449
13'4" to 14'2" 1130 1130 1262 1461 1631 1747 1927 2026 2196 2449
14'4" to 15'2" 1192 1192 1334 1541 1711 1798 2055 2164 2458 2561
15'4" to 16'2" 1192 1192 1334 1541 1711 1798 2055 2164 2458 2561
DOOR PRICES
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/2" Insulated each 45 .00
1/2" Tempered Insulated each 55 .00
High Altitude Insulated Glass (add to above) 18 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/2" Insulated Glass 45 .00
1/2" Insulated Tempered Glass 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Bold Prices = 1" solid shaft standard Available in 1" increments from 4' to 16'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
Models HDP20 / HDPL20 / HDPF20Model 524VInsulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE PLUS c o m m e r c i a l
• Design Pressure: 30 PSF (min)• Test Pressure: 45 PSF (min)• 130 MPH Exposure B design wind speed • 120 MPH Exposure C design wind speed (one story)• 110 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W5 WINDCODE® FEATURES: W5Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC10 REHD-PPCOMMW1W8-11
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/2" Insulated each 45 .00
1/2" Tempered Insulated each 55 .00
High Altitude Insulated Glass (add to above) 18 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/2" Insulated Glass 45 .00
1/2" Insulated Tempered Glass 70 .00
High Altitude Insulated Glass Consult CIA
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 504 504 565 632 710 746 857 892 965 1005
8'4" to 9'2" 532 532 601 675 754 793 907 945 1032 1072
9'4" to 10'2" 567 567 640 777 862 904 1027 1073 1175 1218
10'4" to 11'2" 828 828 936 1108 1257 1318 1472 1534 1715 1765
11'4" to 12'2" 871 871 985 1160 1259 1394 1549 1654 1797 1845
12'4" to 13'2" 1152 1152 1301 1497 1632 1821 2007 2135 2340 2628
13'4" to 14'2" 1152 1152 1301 1497 1632 1821 2007 2135 2340 2628
DOOR PRICES
Bold Prices = 1" solid shaft standard Available in 1" increments from 4' to 14'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
Models HDP20 / HDPL20 / HDPF20Model 524VInsulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE PLUS c o m m e r c i a l
W6• Design Pressure: 37 PSF (min) • Test Pressure: 55 PSF (min) • 140 MPH Exposure B design wind speed • 130 MPH Exposure C design wind speed (one story) • 120 MPH Exposure C design wind speed (two story) • Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission • Approved drawings available at FloridaBuilding.org
W6 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC11 REHD-PPCOMMW1W8-11
• 24 gauge smooth exterior finish with deep ribbed pattern .
• Durable rust-resistant Tog-L-Loc® construction eliminates rivets and welds .
• 2" thick sectional ribbed construction .
• 10,000 cycle torsion spring counterbalance (EZ-SET® not available) .
• All sections solid .
• Struts as required .
• Easy hardware attachment through prepunched stiles .
• 2" angle mounted track .
• Available in heights from 5'3" to 18' in 3" increments .
• W1 models available in 2" increments from 4' to 24'2" wide .
• W4 models available in 2" increments from 4' to 22'2" wide .
• W5 models available in 2" increments from 4' to 22'2" wide .
• W6 models available in 2" increments from 4' to 14'2" wide .
• W8 models available in 2" increments from 4' to 14'2" wide .
• Approved drawings available at FloridaBuilding .org .
• For proper WindCode® ratings, see General Information tab .
• Doors ordered in white unless a color is specified .
NOTE: For W6–W8 doors, door openings 9'2" or wider, sections must be 2" wider than opening.
PRODUCT SPECIFICATIONS
SPECIAL NOTES
SIZES
STANDARD HEADROOM REQUIREMENTS2" Track 3" Track
16" 18"*More headroom required for doors with 6" ID spring
Low Headroom:• Front mount: 10" minimum, 1000 lb . maximum .• Rear mount: 7" minimum, 750 lb . maximum .
Vertical lift: door height + 12"High lift: above 16"Follow-the-roof slope: 16"
Double shaft may be required on doors with vertical lift, high lift, follow-the-roof and/or high cycle springs . This will require 12" additional headroom – consult the factory .
PRODUCT information
Model 524Non-Insulated Deep Rib Flush Panel
PANEL OPTIONS
WINDOWS
APPLICATIONS
WARRANTIES
Deep Rib Panel
NOTES
24" x 6" Full Vision
WARRANTY
10 YRL I M I T E D
CONSTRUCTION
• Due to the nature of the product, we strongly recommend that you have your commercial door professionally installed
• Commercial operators are available for commercial applications only
• Contact Clopay for a special installation quote
TORSION SPRING AND COMMERCIAL OPERATOR WARNINGFor safety reasons, Clopay does not recommend the installation oftorsion springs or commercial operators by anyone other than atrained and experienced professional installer or contractor usingspecialized tools. Clopay disclaims any and all liability, includingany obligation or liability under indemnification agreements withdistributors or retailers, for death, personal injury, expense orproperty damage incurred by consumers who attempt to install torsion springs or commercial operators.
• Windows available for additional charge• Not available in all sizes or WindCode® ratings .
Used when value and reliability are required .• Pole Barns • Farm Machinery Sheds• Warehouses • Storage Sheds
VALUE c o m m e r c i a lW1 – W8
COMMERCIAL SECTIONALGARAGE DOORS
1-LAYER CONSTRUCTION
1. Steel (Non-Insulated)
Shown: Model 524 with 24" x 6" windows
COLORS
StandardWhite
Chocolate
Effective January 1, 2016 CMWC12 REHD-PPCOMMW1W8-11
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/8" DSB each 25 .00
1/8" Acrylic (Plexiglas®) each 27 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 415 415 461 521 578 613 687 715 775 804
8'4" to 9'2" 432 432 482 541 611 643 720 751 816 847
9'4" to 10'2" 456 456 512 636 705 739 822 844 940 961
10'4" to 11'2" 620 620 700 830 939 974 1094 1128 1248 1295
11'4" to 12'2" 642 642 722 855 969 1002 1130 1168 1291 1340
12'4" to 13'2" 683 683 772 913 1028 1076 1198 1243 1375 1428
13'4" to 14'2" 697 697 788 935 1050 1103 1223 1273 1428 1480
14'4" to 15'2" 840 840 944 1112 1233 1308 1449 1580 1723 1815
15'4" to 16'2" 863 863 972 1136 1262 1337 1487 1644 1793 1894
16'4" to 17'2" 1068 1068 1210 1399 1557 1726 1886 1994 2183 2287
17'4" to 18'2" 1086 1086 1232 1424 1582 1769 1930 2024 2218 2318
18'4" to 19'2" 1197 1197 1362 1540 1818 1925 2120 2205 2472 2705
19'4" to 20'2" 1214 1214 1383 1557 1858 1953 2150 2232 2515 2800
DOOR PRICES
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 1" increments from 4' to 24'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
Models HDP20 / HDPL20 / HDPF20Model 524Non-Insulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE c o m m e r c i a l
W1 • Design Pressure: 12.5 PSF (min), Test Pressure: 19 PSF (min)• W1 – 90 MPH Exposure B design wind speed• Per International Building Code (ASCE7 with 50% safety factor) • Approved drawings available at clopay.com
W1 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC13 REHD-PPCOMMW1W8-11
• Design Pressure: 28 PSF (min)• Test Pressure: 42 PSF (min)• 120 MPH Exposure B design wind speed • 110 MPH Exposure C design wind speed (one story)• 100 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor)• Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W4 WINDCODE® FEATURES: W4 Must Specify WINDCODE®
Rating When Ordering
Models HDP20 / HDPL20 / HDPF20Model 524Non-Insulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE c o m m e r c i a l
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 475 475 525 594 643 702 782 818 887 924
8'4" to 9'2" 491 491 542 613 692 731 813 852 927 967
9'4" to 10'2" 524 524 583 717 797 841 927 991 1066 1097
10'4" to 11'2" 696 696 777 925 1035 1089 1210 1260 1384 1448
11'4" to 12'2" 721 721 802 954 1076 1120 1251 1306 1433 1583
12'4" to 13'2" 887 887 991 1166 1298 1381 1520 1599 1747 1835
13'4" to 14'2" 974 974 1089 1281 1423 1519 1665 1763 1916 2014
14'4" to 15'2" 989 989 1113 1302 1440 1533 1693 1843 2006 2116
15'4" to 16'2" 1000 1000 1126 1306 1451 1542 1710 1885 2051 2170
16'4" to 17'2" 1247 1247 1414 1625 1805 2013 2179 2287 2502 2619
17'4" to 18'2" 1247 1247 1414 1625 1805 2013 2179 2287 2502 2619
18'4" to 19'2" 1400 1400 1592 1788 2115 2214 2434 2537 2844 3089
19'4" to 20'2" 1400 1400 1592 1788 2115 2214 2434 2537 2844 3089
DOOR PRICES
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/8" DSB each 25 .00
1/8" Acrylic (Plexiglas®) each 27 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 1" increments from 4' to 22'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC14 REHD-PPCOMMW1W8-11
W5• Design Pressure: 30 PSF (min)• Test Pressure: 45 PSF (min)• 130 MPH Exposure B design wind speed • 120 MPH Exposure C design wind speed (one story)• 110 MPH Exposure C design wind speed (two story)• Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W5 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
Models HDP20 / HDPL20 / HDPF20Model 524Non-Insulated Deep Rib Flush Panel
DIY Retail Pricing
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/8" DSB each 25 .00
1/8" Acrylic (Plexiglas®) each 27 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 475 475 525 594 643 702 782 818 887 924
8'4" to 9'2" 491 491 542 613 692 731 813 852 927 967
9'4" to 10'2" 524 524 583 717 797 841 927 991 1066 1097
10'4" to 11'2" 696 696 777 925 1035 1089 1210 1260 1384 1448
11'4" to 12'2" 721 721 802 954 1076 1120 1251 1306 1433 1583
12'4" to 13'2" 992 992 1109 1303 1448 1545 1694 1793 1950 2049
13'4" to 14'2" 1060 1060 1147 1328 1476 1613 1740 1918 2176 2293
14'4" to 15'2" 1328 1328 1533 1723 1911 2062 2300 2428 2674 2784
15'4" to 16'2" 1363 1363 1576 1771 1962 2148 2388 2487 2744 2847
16'4" to 17'2" 1433 1433 1659 1840 2123 2259 2511 2599 2909 3149
17'4" to 18'2" 1468 1468 1700 1875 2202 2313 2573 2653 2996 3340
18'4" to 19'2" 1528 1528 1824 2024 2304 2439 2712 2821 3216 3380
19'4" to 20'2" 1587 1587 1919 2134 2393 2540 2959 3074 3405 3493
DOOR PRICES
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 1" increments from 4' to 22'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
VALUE c o m m e r c i a l
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC15 REHD-PPCOMMW1W8-11
• Design Pressure: 37 PSF (min) • Test Pressure: 55 PSF (min) • 140 MPH Exposure B design wind speed • 130 MPH Exposure C design wind speed (one story) • 120 MPH Exposure C design wind speed (two story) • Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved by Florida Building Commission • Approved drawings available at FloridaBuilding.org
W6 WINDCODE® FEATURES: W6Must Specify WINDCODE®
Rating When Ordering
Models HDP20 / HDPL20 / HDPF20Model 524Non-Insulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE c o m m e r c i a l
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 483 483 546 607 678 713 824 853 928 961
8'4" to 9'2" 508 508 577 640 723 756 869 901 993 1026
9'4" to 10'2" 542 542 618 743 831 866 989 1011 1153 1174
10'4" to 11'2" 716 716 814 963 1109 1145 1285 1317 1520 1570
11'4" to 12'2" 739 739 837 988 1118 1189 1328 1409 1566 1615
12'4" to 13'2" 1018 1018 1155 1346 1508 1633 1788 1924 2119 2191
13'4" to 14'2" 1018 1018 1155 1346 1508 1633 1788 1924 2119 2191
DOOR PRICES
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/8" DSB each 25 .00
1/8" Acrylic (Plexiglas®) each 27 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Bold Prices = 1" solid shaft standard Available in 1" increments from 4' to 14'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC16 REHD-PPCOMMW1W8-11
W8• Design Pressure: 46 PSF (min) • Test Pressure: 69 PSF (min) • 150 MPH Exposure C design wind speed (one story) • W8–146 MPH Exposure C design wind speed (two story) • Per International Building Code or Florida Building Code (ASCE 7-98 with 50% safety factor) • Doors are approved for high velocity hurricane zones by Florida Building Commission• Approved drawings available at FloridaBuilding.org
W8 WINDCODE® FEATURES:
Must Specify WINDCODE®
Rating When Ordering
Models HDP20 / HDPL20 / HDPF20Model 524Non-Insulated Deep Rib Flush Panel
DIY Retail Pricing
VALUE c o m m e r c i a l
WINDOW PRICESGlazing Options
Glazed with: 24" x 6"
1/8" DSB each 25 .00
1/8" Acrylic (Plexiglas®) each 27 .00
Full Vision (per ft. of width)
1/8" DSB 25 .00
1/8" Acrylic (Plexiglas®) 41 .00
1/8" DSB Tempered 36 .00
TRACK OPTIONS/ADDITIONAL SPECIALTY ITEMS
See page CMWC17 for a list of track options and additional specialty items .
Door WidthDoor Height
Up to 7'4 Section
Up to 8'4 Section
Up to 9'5 Section
Up to 10'5 Section
Up to 11'6 Section
Up to 12'6 Section
Up to 13'7 Section
Up to 14'7 Section
Up to 15'8 Section
Up to 16'8 Section
Up to 8'2" 644 741 770 892 927 1054 1103 1239 1269 1458
8'4" to 9'2" 660 760 790 923 955 1086 1137 1279 1311 1525
9'4" to 10'2" 694 793 828 1056 1091 1195 1237 1403 1424 1663
10'4" to 11'2" 852 974 1016 1279 1316 1455 1510 1696 1745 2039
11'4" to 12'2" 887 1020 1063 1334 1368 1552 1611 1813 1863 2123
12'4" to 13'2" 1076 1202 1310 1544 1661 1779 1926 2318 2429 2736
13'4" to 14'2" 1089 1218 1333 1566 1689 1804 1956 2348 2458 2809
DOOR PRICES
Bold Prices = 1" solid shaft standard Shaded area = 3 angle mount track standardAvailable in 1" increments from 4' to 14'2" wide .Available in 3" increments from 5'3" to 18' high . For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
COMMERCIAL SECTIONALGARAGE DOORS
Note: Prices INCLUDE Home Delivery (within a 30 mile driving distance from the store) – $3 .00 for each additional mile• ALWAYS choose the “Customer” as the “Ship To” Location • ALWAYS obtain the customer’s address
• ALWAYS review the “Cancellation Policy” on Special Orders with EVERY customer (refer to “General Information” tab)
Effective January 1, 2016 CMWC17 REHD-PPCOMMW1W8-11
DIY Retail Pricing
Commercial Track / Options
COMMERCIAL SECTIONALGARAGE DOORS
Add 12.26 per ft. lift of door to above adders except for Low Headroom Track3" track available (additional charges apply) . Contact Clopay for a quote .
OPTIONS
Diagram Description Add-On Price Diagram Description Add-On Price
SOLID SHAFT – all doors usinga jackshaft operator or chain hoistmust have a solid torsion shaft
8 .21 per ft .of door width
+ 1 ft .
OPERATOR REINFORCING KIT – for operator installation (must befield installed)
36 .45
EXTENDED SOLID SHAFT – for jack-shaft operator or chain hoist when asolid shaft is standard with door
10 .92 QUICK TURN BRACKETS – with extrarollers – cuts headroom by 2" 25 .92
KEYED SIDE LOCK – with 18" bar (not available with 3" track) 23 .87 SPRING BUMPERS –
leaf type 18 .45
EXHAUST PORTS 30 .90CHAIN HOIST – reduced drive 3:1ratio including chain for mounts upto 14' from floor
152 .96
HIGH CYCLE SPRINGS – consultfactory for availability and pricing – Extra chain for hoists mounted
over 14' from the floor 3 .33
ADDITIONAL SPECIALTY ITEMS
Punched Angle Iron (1 1/4" x 11/4" x 13 gauge) 10' lengths 1 .29 per linear ft .Punched Angle Iron (2" x 2" x 12 gauge) 10' lengths 2 .55 per linear ft .Perimeter Seals: Vinyl molding with vinyl seal (available in 7', 8', 9', 14', 16' lengths) 15 pcs ./bundle 1 .39 per linear ft . Top Seal 1 .76 per linear ft . Reverse Angle Seal 2 .49 per linear ft .Double End Stiles (where not standard includes 16 gauge end stiles, double end hinges and long stem rollers) 14 .49 per sectionBottom Astragal – U-shaped vinyl 0 .68 per linear ft . 7" U-shaped vinyl for irregular floors 1 .39 per linear ft .
TRACK
Diagram Description Add to 2" Track
Add to 3" Track
LOW HEADROOM TRACK –121/2" H .R . front, 41/2" H .R . rear
Doors up to 10'1" high 98 .98 146 .01
Doors 10'2" to 14'1" high 98 .98 181 .67
Doors 14'2" to 16'1" high 98 .98 218 .44
HORIZONTAL TRACKS FOLLOWING ROOF SLOPE
Slope up to 21/2" in 12" 91 .95 101 .29
Slope up to 41/2" in 12" 125 .34 101 .29
Slope over 41/2" in 12" 161 .32 101 .29
Special track layouts, add tohorizontal track prices above 185 .00 185 .00
Diagram Description Add to 2" Track
Add to 3" Track
VERTICAL LIFT
Spring bumpers and breakawaytrack included 17 .58 85 .98
Doors 200 sq . ft . and over: add to price above 126 .40 126 .40
HIGH LIFT TRACK – Spring bumpers and breakaway track available in3" increments . Horizontal track must be at least 12" below ceiling or obstruction .
Doors up to but not including 200 sq . ft .
Up to 36" high lift (torsion) 75 .99 85 .98
Up to 54" high lift (torsion) 104 .06 85 .98
Up to 96" high lift (torsion) 132 .74 85 .98
Over 96" high lift (torsion) 17 .58 129 .50
Doors 200 sq . ft . and over: add to high lift track prices above 126 .26 126 .40
Effective January 1, 2016 CMWC18 REHD-PPCOMMW1W8-11
DIY Retail Pricing
Commercial OperatorsTrolley and Jackshaft
COMMERCIAL SECTIONALGARAGE DOORS
TROLLEY OPERATORS
JACKSHAFT OPERATORS
APPLICATION
The Model ATS (Advanced Trolley System) door operator is for use on residential or light-duty commercial door applications with standard lift . Max . recommended duty cycle: 8 cycles per hour .
STANDARD FEATURES
• For standard radius or low headroom track• 8 cycles per hour usage• High-torque 1/2 HP 115V single-phase motor with instant reverse• Rails for up to 10' high doors standard• Available up to 14' high doors
MODEL ATS
WARRANTY
1 YRL I M I T E D
CONSTRUCTION
APPLICATION
The Model MT door operator is for use on standard lift sectional doors up to 14' high and up to 12 cycles per hour .
STANDARD FEATURES
• For standard radius or low headroom track• 12 cycles per hour usage• High-starting torque motor with overload protection• Heavy-duty 2" x 2" double-angle iron track for
up to 14' high door included with swing-up header bracket
• Rails for up to 12' high doors standard
MODEL MT
WARRANTY
2 YRL I M I T E D
CONSTRUCTION
APPLICATION
The Model T continuous-duty door operator is designed for use on industrial sectional overhead doors with standard lift .
APPLICATION
Model MJ door operator is designed for use on industrial sectional doors with high or vertical lift and on small rolling doors and grilles . Max . recommended duty cycle: 12 cycles per hour .
APPLICATION
Model H continuous-duty door operator is designed for use on industrial sectional overhead doors with high or vertical lift and on larger rolling doors and grilles .
STANDARD FEATURES
• For standard radius or low headroom track• High cycle usage• Four HP options (1/3, 1/2, 3/4, 1 HP) • Available in 110, 220, or 408V • High-starting torque continuous-duty motor with overload protection• Rails for up to 12' high doors standard• Available up to 24' high doors
STANDARD FEATURES
• For standard radius or low headroom track• High cycle usage• Four HP options (1/3, 1/2, 3/4, 1 HP) • Available in 110, 220 or 408V • High-starting torque continuous-duty motor with overload protection• Emergency hand chain operation in case of power failure• Available up to 24' high doors
STANDARD FEATURES
• For high lift or vertical lift track or 160C roll-up door• 12 cycles per hour usage• 1/2 HP• High-starting torque motor with overload protection
MODEL T
MODEL MJ
MODEL H
WARRANTY
2 YRL I M I T E D
CONSTRUCTION
WARRANTY
2 YRL I M I T E D
CONSTRUCTION
WARRANTY
2 YRL I M I T E D
CONSTRUCTION
Up to 8' high 365 .50
8'–10' adder 28 .05
10'–12' adder 51 .85
12'–14' adder 104 .55
Up to 12' high 540 .60
12'–14' adder 17 .85
1/3 HP 593 .301/2 HP 629 .003/4 HP 747 .15
1 HP 898 .45
Up to 14' adder 17 .85
Up to 16' adder 33 .15
1/2 HP 561 .85
1/3 HP 751 .401/2 HP 814 .303/4 HP 892 .50
1 HP 999 .60
Effective January 1, 2016 CMWC19 REHD-PPCOMMW1W8-11
• 26 gauge hot-dipped galvanized steel curtain (provides rust resistance) .
• Tubular 15/16" dead shaft axle with 12" ball bearing drums .
• 26 gauge steel roll formed into corrugated sheets and interlocked and seamed together .
• Full galvanized sheet on barrel .
• Heavy-duty bottom bar with galvanized angle and vinyl astragal .
• 12 gauge hot-dipped galvanized steel guides .
• Standard inside bottom bar lock – double slide lock .
• All fasteners and hardware included .
• Available with option to install with an opener (Pantheon in-tube motor on Jackshaft Model MJ) .
• Prices include wrap charges .
• Widths available 2' to 18' in 1" increments .
• Heights available 2' to 16' in 2" increments .
• For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
PRODUCT SPECIFICATIONS
SIZES
STANDARD HEADROOM REQUIREMENTS
Door Height Vertical Headroom Horizontal Headroom
Up to 8' 20" 19"
8'1" to 10' 21" 21"
10'1" to 14' 21-1/2" 22"
14'1" to 16' 22" 23"
Door WidthDoor Height
Up to 8' Up to 9' Up to 10' Up to 12' Up to 14'
W6
8' 791 841 911 994 1131
9' 839 872 964 1072 1182
10' 985 1037 1127 1250 1391
12' 1053 1111 1207 1338 1498
14' 1141 1212 1322 1453 1643
DOOR PRICES
DIY Retail Pricing
Model 160CHeavy-Duty Steel Door W6
COMMERCIAL ROLL-UPGARAGE DOORS
1-LAYER CONSTRUCTION
1. Steel (Non-Insulated)
Shown: Model 160C
COLORS
Glossy White Silhouette GrayWhite Buckskin
Valentine Red Sunset OrangeTangerine Marine Green
Desert Tan BronzeContinental Brown Cedar Red
Teal Fern GreenDark Teal Evergreen
Forest Green Polar BlueRoyal Blue
• Due to the nature of the product, we strongly recommend that you have your commercial door professionally installed
• Commercial operators are available for commercial applications only and must be professionally installed
• Contact Clopay for a special installation quote
NOTES
APPLICATIONS WARRANTY
• Post Frame Buildings
• Farm Machinery Sheds
• Light Industrial Warehousing
WARRANTY
25 YRL I M I T E D
PAINT SYSTEM
Effective January 1, 2016 CMWC20 REHD-PPCOMMW1W8-11
• 26 gauge hot-dipped galvanized steel curtain (provides rust resistance) .
• Tubular 15/16" live shaft axle with 9" ball bearing drums .
• 26 gauge steel roll formed into corrugated sheets and interlocked and seamed together .
• Heavy-duty bottom bar with galvanized angle and vinyl astragal .
• 18 gauge hot-dipped galvanized steel guides .
• Standard outside minilock .
• All fasteners and hardware included .
• Prices include wrap charges .
• Widths available 2' to 12' in 1" increments .
• Heights available 2' to 14' in 2" increments .
• For pricing not shown, contact Clopay at 1-800-526-2050 for a quote .
PRODUCT SPECIFICATIONS
SIZES
Door WidthDoor Height
Up to 7' 7'1" to 7'4" 7'5" to 8' 8'1" to 9' 9'1" to 10'
W3
8'2" to 8'8" 530 551 577 630 N/A8'10" to 9' 547 580 591 644 7019'2" to 10' 586 607 628 661 692
W4
Up to 3' 294 305 310
NOT AVAILABLE
3'2" to 3'4" 306 317 3213'6" to 3'8" 330 341 3463'10" to 4' 345 357 3594'2" to 5' 357 367 3835'2" to 6' 383 396 4116'2" to 7' 471 487 5097'2" to 8' 507 532 542 604
W8
Up to 3' 462 479 514
NOT AVAILABLE
3'2" to 3'4" 505 524 5633'6" to 3'8" 487 506 5343'10" to 4' 515 535 5744'2" to 5' 561 583 6265'2" to 6' 661 686 7386'2" to 7' 757 788 8487'2" to 8' 767 797 860 9518'2" to 8'8" 777 807 869 961
DOOR PRICES
DIY Retail Pricing
Model 150CLight-Duty Steel Door W3 – W8
COMMERCIAL ROLL-UPGARAGE DOORS
1-LAYER CONSTRUCTION
1. Steel (Non-Insulated)
COLORS
Glossy White Silhouette GrayWhite Buckskin
Valentine Red Sunset OrangeTangerine Marine Green
Desert Tan BronzeContinental Brown Cedar Red
Teal Fern GreenDark Teal Evergreen
Forest Green Polar BlueRoyal Blue
• Due to the nature of the product, we strongly recommend that you have your commercial door professionally installed
• Contact Clopay for a special installation quote
NOTES
APPLICATIONS WARRANTY
• Yard Barns
• Storage Sheds
• Mini Warehouses
• Other light-duty applications
WARRANTY
25 YRL I M I T E D
PAINT SYSTEM
STANDARD HEADROOM REQUIREMENTS
Door HeightVertical
HeadroomHorizontal Headroom
Up to 7'4" 151/2" 17"7'5" to 8'8" 16" 171/2"8'9" to 10' 17" 181/4"10'1" to 14' 18" 191/4"
Shown: Model 150C
REHD-PPCOMMW1W8-11