commercial gear quick reference

5/26/2018 Commercial Gear Quick Reference

1/26

1300 HYDRAULICS Innisfail Branch Cairns Branch1300 493 728 07 4061 9700 07 4081 5400

1300 806 330 07 4061 9722 07 4033 2055

Email: [email protected] Website: www.cfphydraulics.com.au

COMMERCIAL GEARPUMPS & MOTORS

QUICK REFERENCE

CATALOGUE


2/26

COMMERCIAL GEAR PUMPS & MOTORS

1300 493 728 Section 6 Page B1 www.cfphydraulics.com.au

1300 806 330 Quick Refernce CFP06B1201 [email protected]

GEAR PUMPS & MOTORS

05 07 10 12 15 17 20 22 25 27 30

Gear Width 1/2" 3/4" 1 1.1/4 1.1/2 1.3/4 2 2.1/4 2.1/2 2.3/4 3

30/31 Housing Size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25

Housing Size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55

cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60 72.60 80.10

ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94 4.43 4.89

30 Pressure (psi) 2500 2500 2500 2500 2500 2250 2250 2000 2000

30 Pressure (bar) 172 172 172 172 172 155 155 138 138

31 Pressure (psi) 3000 3000 3000 3000 3000 2500 2500 2200 220031 Pressure (bar) 207 207 207 207 207 172 172 153 153

50/51 Housing Size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25

Housing Size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55

cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50

ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38

50 Pressure (psi) 2500 2500 2500 2500 2500 2000 2000 2000 2000

50 Pressure (bar) 172 172 172 172 172 138 138 138 138

51 Pressure (psi) 3000 3000 3000 3000 3000 3000 2500 2500 2500

51 Pressure (bar) 207 207 207 207 207 207 172 172 172

75/76 Housing Size (in) 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00

Housing Size (mm) 44.45 50.80 57.15 63.50 69.85 76.20 82.55 88.90 95.25 101.60

cc/rev 50.40 67.20 84.00 100.80 117.60 134.40 151.20 168.00 184.80 201.60

ci/rev 3.08 4.10 5.13 6.15 7.18 8.20 9.23 10.25 11.28 12.30

75 Pressure (psi) 2500 2500 2500 2500 2500 2500 2250 2250 2000 200075 Pressure (bar) 172 172 172 172 172 172 155 155 138 138

76 Pressure (psi) 3000 3000 3000 3000 3000 2500 2500 2500 2000 2000

76 Pressure (bar) 207 207 207 207 207 172 172 172 138 138

315 Housing Size (in) 0.90 1.14 1.40 1.64 1.90 2.14 2.40

Housing Size (mm) 22.86 28.96 35.56 41.66 48.26 54.36 60.96

cc/rev 10.20 15.20 20.30 25.40 30.50 35.60 40.60

ci/rev 0.62 0.93 1.24 1.55 1.86 2.17 2.48

Pressure (psi) 3500 3500 3500 3500 3300 2900 2500

Pressure (bar) 241 241 241 241 228 200 172

330 Housing Size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50

Housing Size (mm) 25.40 31.75 38.10 44.45 50.80 57.15 63.50

cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60

ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94

Pressure (psi) 3500 3500 3500 3500 3500 3250 3000

Pressure (bar) 241 21 241 241 241 224 207

350 Housing Size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00

Housing Size (mm) 25.4 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20

cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50

ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38

Pressure (psi) 3500 3500 3500 3500 3500 3250 3000 2750 2500

Pressure (bar) 241 241 241 241 241 224 207 190 172

365 Housing Size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00

Housing Size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20

cc/rev 44.30 59.00 73.80 88.50 103.30 118.00 132.00 147.50

ci/rev 2.70 3.60 4.50 5.40 6.30 7.20 8.05 9.00

Pressure (psi) 3500 3500 3500 3500 3500 3500 3250 3000

Pressure (bar) 241 241 241 241 241 241 224 207


3/26




P30/50/75 SERIES CAST IRON GEAR PUMPS & MOTORS

30 SERIES 31 SERIES

Model Gear Size Model Gear Size

PGP 30 3/4"2 PGP 31 3/4"2

PGM 30 3/4"2 PGM 31 3/4"2

50 SERIES 51 SERIES


PGP 50 3/4"2 1/2" PGP 51 3/4"2 1/2

PGM 50 3/4"2 1/2 PGM 51 3/4"2 1/2

75 SERIES 76 SERIES


PGP 75 1 3 PGP 76 1 3

PGM 75 1"3 PGM 76 1 3

PGP 300 SERIES CAST IRON GEAR PUMPS & MOTORS

PUMPS MOTORS


PGP 315 1/2"2 PGM 315 1/2"2

PGP 330 3/4"2 PGM 330 3/4"2

PGP 350 3/4"2 1/2" PGM 350 3/4"2 1/2"

PGP 365 3/4"2 1/2" PGM 365 3/4"2 1/2"


4/26




P30 GEAR PUMPS

SAE B 4 BOLT

Stock CodeDisplacement

cc/rev Shaft Rotation

Inlet Port

SAESplit Flange

Pressure Port

SAESplit Flange

Mount Shaft

SAE B 13 T Shaft

P30A 442 BE UF07 -2524.2

ClockwiseSAE SAE

SAE B 4 Bolt SAE B 13T

P30A 542 BE UF07 -25 Anti-clockwise

P30A 442 BE UJ10 -2532.3

ClockwiseSAE 1 SAE

P30A 542 BE UG10 -25 Anti-clockwise

P30A 442 BE UK12 -2540.4

ClockwiseSAE 1 SAE

P30A 542 BE UH12 -25 Anti-clockwise

P30A 442 BE UK15 -2548.4

ClockwiseSAE 1 SAE


P30A 442 BE UK17 -2556.5

ClockwiseSAE 1 SAE P30A 542 BE UH17 -25 Anti-clockwise

P30A 442 BE UK20 -2564.6

ClockwiseSAE 1 SAE


SAE BB 15T Shaft

P30A 442 BE UF07 -4324.2

ClockwiseSAE SAE

SAE B 4 Bolt SAE BB 15T


P30A 442 BE UJ10 -4332.3

ClockwiseSAE 1 SAE


P30A 442 BE UK12 -4340.4

ClockwiseSAE 1 SAE


P30A 442 BE UK15 -43

48.4

Clockwise

SAE 1 SAE P30A 542 BE UH15 -43 Anti-clockwise

P30A 442 BE UK17 -4356.5

ClockwiseSAE 1 SAE


P30A 442 BE UK20 -4364.6

ClockwiseSAE 1 SAE


1.00 Diameter Keyed Shaft

P30A 442 BE UF07 -6724.2

ClockwiseSAE SAE

SAE B 4 Bolt 1.00 Dia Keyed


P30A 442 BE UJ10 -6732.3

ClockwiseSAE 1 SAE


P30A 442 BE UK12 -67

40.4

Clockwise


P30A 442 BE UK15 -6748.4

ClockwiseSAE 1 SAE


P30A 442 BE UK17 -6756.5

ClockwiseSAE 1 SAE


P30A 442 BE UK20 -6764.6

ClockwiseSAE 1 SAE



5/26




P30 GEAR PUMPS

SAE B 2 BOLT



Inlet Port

SAESplit Flange

Pressure Port

SAESplit Flange

Mount Shaft

SAE B 13T Shaft

P30A 497 BE UF07 -2524.2

ClockwiseSAE SAE



P30A 497 BE UJ10 -2532.3

ClockwiseSAE 1 SAE


P30A 497 BE UK12 -2540.4

ClockwiseSAE 1 SAE


P30A 497 BE UK15 -2548.4

ClockwiseSAE 1 SAE


P30A 497 BE UK17 -2556.5

ClockwiseSAE 1 SAE P30A 597 BE UH17 -25 Anti-clockwise

P30A 497 BE UK20 -2564.6

ClockwiseSAE 1 SAE


SAE BB 15T Shaft

P30A 497 BE UF07 -4324.2

ClockwiseSAE SAE



P30A 497 BE UJ10 -4332.3

ClockwiseSAE 1 SAE


P30A 497 BE UK12 -4340.4

ClockwiseSAE 1 SAE


P30A 497 BE UK15 -43

48.4

Clockwise


P30A 497 BE UK17 -4356.5

ClockwiseSAE 1 SAE


P30A 497 BE UK20 -4364.6

ClockwiseSAE 1 SAE



P30A 497 BE UF07 -6724.2

ClockwiseSAE SAE



P30A 497 BE UJ10 -6732.3

ClockwiseSAE 1 SAE


P30A 497 BE UK12 -67

40.4

Clockwise


P30A 497 BE UK15 -6748.4

ClockwiseSAE 1 SAE


P30A 497 BE UK17 -6756.5

ClockwiseSAE 1 SAE


P30A 497 BE UK20 -6764.6

ClockwiseSAE 1 SAE



6/26




M30 GEAR MOTORS

SAE B 4 BOLT


cc/revShaft Rotation

Ports

O-Ring BossMount Shaft

SAE B 13T Shaft

M30A 842 BE EF07 -25 24.2

Bi-Rotational

SAE -12


M30A 842 BE EF10 -25 32.3

M30A 842 BE EF12 -25 40.4

M30A 842 BE AF15 -25 48.4

SAE -16M30A 842 BE AF17 -25 56.5

M30A 842 BE AF20 -25 64.6

SAE BB 15T Shaft

M30A 842 BE EF07 -43 24.2

Bi-Rotational

SAE -12


M30A 842 BE EF10 -43 32.3

M30A 842 BE EF12 -43 40.4M30A 842 BE AF15 -43 48.4

SAE -16M30A 842 BE AF17 -43 56.5

M30A 842 BE AF20 -43 64.6


M30A 842 BE EF07 -67 24.2

Bi-Rotational

SAE -12


M30A 842 BE EF10 -67 32.3

M30A 842 BE EF12 -67 40.4

M30A 842 BE AF15 -67 48.4

SAE -16M30A 842 BE AF17 -67 56.5

M30A 842 BE AF20 -67 64.6

SAE B 2 BOLT



Ports


SAE B 13T Shaft

M30A 897 BE EF07 -25 24.2

Bi-Rotational

SAE -12


M30A 897 BE EF10 -25 32.3

M30A 897 BE EF12 -25 40.4

M30A 897 BE AF15 -25 48.4

SAE -16M30A 897 BE AF17 -25 56.5

M30A 897 BE AF20 -25 64.6

SAE BB 15T Shaft

M30A 897 BE EF07 -43 24.2

Bi-Rotational

SAE -12


M30A 897 BE EF10 -43 32.3

M30A 897 BE EF12 -43 40.4

M30A 897 BE AF15 -43 48.4

SAE -16M30A 897 BE AF17 -43 56.5

M30A 897 BE AF20 -43 64.6


M30A 897 BE EF07 -67 24.2

Bi-Rotational

SAE -12


M30A 897 BE EF10 -67 32.3

M30A 897 BE EF12 -67 40.4

M30A 897 BE AF15 -67 48.4SAE -16M30A 897 BE AF17 -67 56.5

M30A 897 BE AF20 -67 64.6


7/26




P50 GEAR PUMPS

SAE C 4 BOLT



Inlet Port

SAE Split Flange

Pressure Port

SAE Split FlangeMount Shaft

SAE C 14T Shaft

P50A 478 BEUF 07 -0731.3

ClockwiseSAE SAE

SAE C 4 Bolt SAE C 14T

P50A 578 BEUF 07 -07 Anti-clockwise

P50A 478 BE UJ10 -0741.8

ClockwiseSAE 1 SAE


P50A 478 BE OJ12 -0752.2

ClockwiseSAE 1 SAE 1

P50A 578 BE OG12 -07 Anti-clockwise

P50A 478 BE OK15 -0762.7

Clockwise

SAE 1 SAE 1

P50A 578 BE OH15 -07 Anti-clockwise

P50A 478 BE OK17 -0773.1

Clockwise

P50A 578 BE OH17 -07 Anti-clockwiseP50A 478 BE OK20 -07

83.6Clockwise


P50A 478 BE OK22 -0794

Clockwise


P50A 478 BE OK25 -07104.5

Clockwise


1.25 Keyed Shaft

P50A 478 BE UF07 -1131.3

ClockwiseSAE SAE

SAE C 4 Bolt1.25

Keyed


P50A 478 BE UJ10 -1141.8

ClockwiseSAE 1 SAE


P50A 478 BE OJ12 -1152.2



P50A 478 BE OK15 -1162.7

Clockwise

SAE 1 SAE 1


P50A 478 BE OK17 -1173.1

Clockwise


P50A 478 BE OK20 -1183.6

Clockwise


P50A 478 BE OK22 -1194

Clockwise


P50A 478 BE OK25 -11

104.5

Clockwise



8/26




P50 GEAR PUMPS

SAE C 2 BOLT



Inlet Port

SAESplit Flange

Pressure Port

SAESplit Flange

Mount Shaft

SAE C 14T Shaft

P50A 498 BE UF07 -0731.3

ClockwiseSAE SAE



P50A 498 BE UJ10 -0741.8

ClockwiseSAE 1 SAE


P50A 498 BE OJ12 -0752.2



P50A 498 BE 15 -0762.7

Clockwise

SAE 1 SAE 1

P50A 598 BE 15 -07 Anti-clockwise

P50A 498 BE 17 -07

73.1

Clockwise


P50A 498 BE 20 -0783.6

Clockwise


P50A 498 BE 22 -0794

Clockwise


P50A 498 BE 25 -07104.5

Clockwise


1.25 Keyed Shaft

P50A 498 BE UF07 -1131.3

ClockwiseSAE SAE

SAE C 2 Bolt 1.25 Keyed


P50A 498 BE UJ10 -11

41.8

Clockwise

SAE 1 SAE P50A 598 BE UG10 -11 Anti-clockwise

P50A 498 BE OJ12 -1152.2



P50A 498 BE 15 -1162.7

Clockwise

SAE 1 SAE 1


P50A 498 BE 17 -1173.1

Clockwise


P50A 498 BE 20 -1183.6

Clockwise


P50A 498 BE 22 -1194

Clockwise


P50A 498 BE 25 -11104.5

Clockwise



9/26




M50 GEAR MOTORS

SAE C 4 BOLT



Ports


SAE C 14T Shaft

M50A 878 BE EF07 -07 31.3

Bi-Rotational

SAE -12


M50A 878 BE EF10 -07 41.8

M50A 878 BE EF12 -07 52.2

M50A 878 BE AF15 -07 62.7

SAE -16

M50A 878 BE AF17 -07 73.1

M50A 878 BE AF20 -07 83.6

M50A 878 BE AF22 -07 94

M50A 878 BE AF25 -07 104.5

1.25 Keyed Shaft

M50A 878 BE EF07 -11 31.3

Bi-Rotational

SAE -12


M50A 878 BE EF10 -11 41.8

M50A 878 BE EF12 -11 52.2

M50A 878 BE AF15 -11 62.7

SAE -16

M50A 878 BE AF17 -11 73.1

M50A 878 BE AF20 -11 83.6

M50A 878 BE AF22 -11 94

M50A 878 BE AF25 -11 104.5

SAE C 2 BOLT

Stock Code

Displacement


Ports

O-Ring Boss Mount Shaft

SAE C 14T Shaft

M50A 898 BE EF07 -07 31.3

Bi-Rotational

SAE -12


M50A 898 BE EF10 -07 41.8

M50A 898 BE EF12 -07 52.2

M50A 898 BE AF15 -07 62.7

SAE -16

M50A 898 BE AF17 -07 73.1

M50A 898 BE AF20 -07 83.6

M50A 898 BE AF22 -07 94

M50A 898 BE AF25 -07 104.5

1.25 Keyed Shaft

M50A 898 BE EF07 -11 31.3

Bi-Rotational

SAE -12


M50A 898 BE EF10 -11 41.8

M50A 898 BE EF12 -11 52.2

M50A 898 BE AF15 -11 62.7

SAE -16

M50A 898 BE AF17 -11 73.1

M50A 898 BE AF20 -11 83.6

M50A 898 BE AF22 -11 94

M50A 898 BE AF25 -11 104.5


10/26




P75 GEAR PUMPS

SAE C 4 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P75A 478 BE OJ10 -0767.2

Clockwise

SAE 1 SAE 1



P75A 478 BE OJ12 -0784

Clockwise


P75A 478 BE OK15 -07100.8

Clockwise

SAE 1 SAE 1


P75A 478 BE OK17 -07117.6

Clockwise


P75A 478 BE OK20 -07134.4

Clockwise

P75A 578 BE OH20 -07 Anti-clockwiseP75A 478 BE OQ22 -07

151.2Clockwise

SAE 2 SAE 1 P75A 578 BE ON22 -07 Anti-clockwise

P75A 478 BE OQ25 -07168

Clockwise

P75A 578 BE ON25 -07 Anti-clockwise

1.25 Keyed Shaft

P75A 478 BE OJ10 -1167.2

Clockwise

SAE 1 SAE 1

SAE C 4 Bolt1.25

Keyed


P75A 478 BE OJ12 -1184

Clockwise


P75A 478 BE OK15 -11100.8

Clockwise

SAE 1 SAE 1


P75A 478 BE OK17 -11117.6

Clockwise


P75A 478 BE OK20 -11134.4

Clockwise

P75A 578 BE OJ20 -11 Anti-clockwise

P75A 478 BE OQ22 -11151.2

Clockwise


P75A 478 BE OQ25 -11168

Clockwise



11/26




P75 GEAR PUMPS

SAE C 2 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P75A 498 BE OJ10 -0767.2

Clockwise

SAE 1 SAE 1



P75A 498 BE OJ12 -0784

Clockwise


P75A 498 BE OK15 -07100.8

Clockwise

SAE 1 SAE 1


P75A 498 BE OK17 -07117.6

Clockwise


P75A 498 BE OK20 -07134.4

Clockwise

P75A 598 BE OH20 -07 Anti-clockwiseP75A 498 BE OQ22 -07

151.2Clockwise


P75A 498 BE OQ25 -07168

Clockwise


1.25 Keyed Shaft

P75A 498 BE OJ10 -1167.2

Clockwise

SAE 1 SAE 1

SAE C 2 Bolt1.25

Keyed


P75A 498 BE OJ12 -1184

Clockwise


P75A 498 BE OK15 -11100.8

Clockwise

SAE 1 SAE 1


P75A 498 BE OK17 -11117.6

Clockwise


P75A 498 BE OK20 -11134.4

Clockwise


P75A 498 BE OQ22 -11151.2

Clockwise


P75A 498 BE OQ25 -11168

Clockwise



12/26




M75 GEAR MOTORS

SAE C 4 BOLT



Ports


SAE C 14T Shaft

M75A 878 BE AF07 -07 50.4

Bi-Rotational

SAE -16


M75A 878 BE AF10 -07 67.2 SAE -16

M75A 878 BE AF12 -07 84 SAE -16

M75A 878 BE AF15 -07 100.8 SAE -16

M75A 878 BE AL17 -07 117.6 SAE -20

M75A 878 BE AL20 -07 134.4 SAE -20

M75A 878 BE AL22 -07 151.2 SAE -20

M75A 878 BE AL25 -07 168 SAE -20

1.25 Keyed Shaft

M75A 878 BE AF07 -11 50.4

Bi-Rotational

SAE -16


M75A 878 BE AF10 -11 67.2 SAE -16

M75A 878 BE AF12 -11 84 SAE -16

M75A 878 BE AF15 -11 100.8 SAE -16

M75A 878 BE AL17 -11 117.6 SAE -20

M75A 878 BE AL20 -11 134.4 SAE -20

M75A 878 BE AL22 -11 151.2 SAE -20

M75A 878 BE AL25 -11 168 SAE -20

SAE C 2 BOLT


cc/rev Shaft RotationPorts


SAE C 14T Shaft

M75A 878 BE AF07 -07 50.4

Bi-Rotational

SAE -16


M75A 878 BE AF10 -07 67.2 SAE -16

M75A 878 BE AF12 -07 84 SAE -16

M75A 878 BE AF15 -07 100.8 SAE -16

M75A 878 BE AL17 -07 117.6 SAE -20

M75A 878 BE AL20 -07 134.4 SAE -20

M75A 878 BE AL22 -07 151.2 SAE -20

M75A 878 BE AL25 -07 168 SAE -20

1.25 Keyed Shaft

M75A 878 BE AF07 -11 50.4

Bi-Rotational

SAE -16


M75A 878 BE AF10 -11 67.2 SAE -16

M75A 878 BE AF12 -11 84 SAE -16

M75A 878 BE AF15 -11 100.8 SAE -16

M75A 878 BE AL17 -11 117.6 SAE -20

M75A 878 BE AL20 -11 134.4 SAE -20

M75A 878 BE AL22 -11 151.2 SAE -20

M75A 878 BE AL25 -11 168 SAE -20


13/26




P330 GEAR PUMPS

SAE B 4 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE B 13T Shaft

P330A 442 EK AB07 -2524.2

Clockwise

SAE 1 SAE 1 SAE B 4 Bolt SAE B 13T

P330A 542 KE AB07 -25 Anti-clockwise

P330A 442 EK AB10 -2532.3

Clockwise


P330A 442 EK AB12 -2540.4

Clockwise


P330A 442 EK AB15 -2548.4

Clockwise


P330A 442 EK AB17 -2556.5

Clockwise

P330A 542 KE AB17 -25 Anti-clockwiseP330A 442 EK AB20 -25

64.6Clockwise


SAE BB 15T Shaft

P330A 442 EK AB07 -4324.2

Clockwise

SAE 1 SAE 1 SAE B 4 Bolt SAE BB 15T


P330A 442 EK AB10 -4332.3

Clockwise


P330A 442 EK AB12 -4340.4

Clockwise


P330A 442 EK AB15 -4348.4

Clockwise


P330A 442 EK AB17 -4356.5

Clockwise


P330A 442 EK AB20 -4364.6

Clockwise



P330A 442 EK AB07 -6724.2

Clockwise

SAE 1 SAE 1 SAE B 4 Bolt

1.00 Dia

Keyed


P330A 442 EK AB10 -6732.3

Clockwise


P330A 442 EK AB12 -6740.4

Clockwise


P330A 442 EK AB15 -6748.4

Clockwise


P330A 442 EK AB17 -6756.5

Clockwise


P330A 442 EK AB20 -6764.6

Clockwise



14/26




P330 GEAR PUMPS

SAE B 2 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE B 13T Shaft

P330A 497 EK AB07 -2524.2

Clockwise

SAE 1 SAE 1 SAE B 2 Bolt SAE B 13T


P330A 497 EK AB10 -2532.3

Clockwise


P330A 497 EK AB12 -2540.4

Clockwise


P330A 497 EK AB15 -2548.4

Clockwise


P330A 497 EK AB17 -2556.5

Clockwise

P330A 597 KE AB17 -25 Anti-clockwiseP330A 497 EK AB20 -25

64.6Clockwise


SAE BB 15T Shaft

P330A 497 EK AB07 -4324.2

Clockwise

SAE 1 SAE 1 SAE B 2 Bolt SAE BB 15T


P330A 497 EK AB10 -4332.3

Clockwise


P330A 497 EK AB12 -4340.4

Clockwise


P330A 497 EK AB15 -4348.4

Clockwise


P330A 497 EK AB17 -4356.5

Clockwise


P330A 497 EK AB20 -4364.6

Clockwise



P330A 497 EK AB07 -6724.2

Clockwise

SAE 1 SAE 1 SAE B 2 Bolt

1.00 Dia

Keyed


P330A 497 EK AB10 -6732.3

Clockwise


P330A 497 EK AB12 -6740.4

Clockwise


P330A 497 EK AB15 -6748.4

Clockwise


P330A 497 EK AB17 -6756.5

Clockwise


P330A 497 EK AB20 -6764.6

Clockwise



15/26




M330 GEAR MOTORS

SAE B 4 BOLT



Ports

O-Ring BossMount

Shaft

O-Ring BossSAE B 13T Shaft

M330A 842 VR EB07 -25 24.2

Bi-Rotational

SAE -12


M330A 842 VR EB10 -25 32.3

M330A 842 VR EB12 -25 40.4

M330A 842 VN EB15 -25 48.4

SAE -16M330A 842 VN EB17 -25 56.5

M330A 842 VN EB20 -25 64.6

SAE BB 15T Shaft

M330A 842 VR EB07 -43 24.2

Bi-Rotational

SAE -12


M330A 842 VR EB10 -43 32.3

M330A 842 VR EB12 -43 40.4M330A 842 VN EB15 -43 48.4

SAE -16M330A 842 VN EB17 -43 56.5

M330A 842 VN EB20 -43 64.6


M330A 842 VR EB07 -67 24.2

Bi-Rotational

SAE -12


M330A 842 VR EB10 -67 32.3

M330A 842 VR EB12 -67 40.4

M330A 842 VN EB15 -67 48.4

SAE -16M330A 842 VN EB17 -67 56.5

M330A 842 VN EB20 -67 64.6

SAE B 2 BOLT



Ports


SAE B 13T Shaft

M330A 897 VR EB07 -25 24.2

Bi-Rotational

SAE -12


M330A 897 VR EB10 -25 32.3

M330A 897 VR EB12 -25 40.4

M330A 897 VN EB15 -25 48.4

SAE -16M330A 897 VN EB17 -25 56.5

M330A 897 VN EB20 -25 64.6

SAE BB 15T Shaft

M330A 897 VR EB07 -43 24.2

Bi-Rotational

SAE -12


M330A 897 VR EB10 -43 32.3

M330A 897 VR EB12 -43 40.4

M330A 897 VN EB15 -43 48.4

SAE -16M330A 897 VN EB17 -43 56.5

M330A 897 VN EB20 -43 64.6


M330A 897 VR EB07 -67 24.2

Bi-Rotational

SAE -12


M330A 897 VR EB10 -67 32.3

M330A 897 VR EB12 -67 40.4

M330A 897 VN EB15 -67 48.4SAE -16M330A 897 VN EB17 -67 56.5

M330A 897 VN EB20 -67 64.6


16/26




P350 GEAR PUMPS

SAE C 4 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P350A 478 EG AB07 -0731.3

Clockwise

SAE 2 SAE 1 SAE C 4 Bolt SAE C 14T

P350A 578 GE AB07 -07 Anti-clockwise

P350A 478 EG AB10 -0741.8

Clockwise


P350A 478 EG AB12 -0752.2

Clockwise


P350A 478 EG AB15 -0762.7

Clockwise


P350A 478 EG AB17 -0773.1

Clockwise

P350A 578 GE AB17 -07 Anti-clockwiseP350A 478 EG AB20 -07

83.6Clockwise


P350A 478 EG AB22 -0794

Clockwise


P350A 478 EG AB25 -07104.5

Clockwise


1.25 Keyed Shaft

P350A 478 EG AB07 -1131.3

Clockwise

SAE 2 SAE 1 SAE C 4 Bolt 1.25Keyed


P350A 478 EG AB10 -1141.8

Clockwise


P350A 478 EG AB12 -1152.2

Clockwise


P350A 478 EG AB15 -1162.7

Clockwise


P350A 478 EG AB17 -1173.1

Clockwise


P350A 478 EG AB20 -1183.6

Clockwise


P350A 478 EG AB22 -1194

Clockwise


P350A 478 EG AB25 -11

104.5

Clockwise



17/26




P350 GEAR PUMPS

SAE C 2 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P350A 498 EG AB07 -0731.3

Clockwise

SAE 2 SAE 1 SAE C 2 Bolt SAE C 14T


P350A 498 EG AB10 -0741.8

Clockwise


P350A 498 EG AB12 -0752.2

Clockwise


P350A 498 EG AB15 -0762.7

Clockwise


P350A 498 EG AB17 -0773.1

Clockwise

P350A 598 GE AB17 -07 Anti-clockwiseP350A 498 EG AB20 -07

83.6Clockwise


P350A 498 EG AB22 -0794

Clockwise


P350A 498 EG AB25 -07104.5

Clockwise


1.25 Keyed Shaft

P350A 498 EG AB07 -1131.3

Clockwise

SAE 2 SAE 1 SAE C 2 Bolt 1.25Keyed


P350A 498 EG AB10 -1141.8

Clockwise


P350A 498 EG AB12 -1152.2

Clockwise


P350A 498 EG AB15 -1162.7

Clockwise


P350A 498 EG AB17 -1173.1

Clockwise


P350A 498 EG AB20 -1183.6

Clockwise


P350A 498 EG AB22 -1194

Clockwise


P350A 498 EG AB25 -11

104.5

Clockwise



18/26




M350 GEAR MOTORS

SAE C 4 BOLT



Ports


SAE C 14T Shaft

M350A 878 VR EB07 -07 31.3

Bi-Rotational

SAE -12


M350A 878 VR EB10 -07 41.8

M350A 878 VR EB12 -07 52.2

M350A 878 VN EB15 -07 62.7

SAE -16

M350A 878 VN EB17 -07 73.1

M350A 878 VN EB20 -07 83.6

M350A 878 VN EB22 -07 94

M350A 878 VN EB25 -07 104.5

1.25 Keyed Shaft

M350A 878 VR EB07 -11 31.3

Bi-Rotational

SAE -12


M350A 878 VR EB10 -11 41.8

M350A 878 VR EB12 -11 52.2

M350A 878 VN EB15 -11 62.7

SAE -16

M350A 878 VN EB17 -11 73.1

M350A 878 VN EB20 -11 83.6

M350A 878 VN EB22 -11 94

M350A 878 VN EB25 -11 104.5

SAE C 2 BOLT

Stock Code

Displacement


Ports


SAE C 14T Shaft

M350A 898 VR EB07 -07 31.3

Bi-Rotational

SAE -12 SAE C 2 Bolt SAE C 14T

M350A 898 VR EB10 -07 41.8 SAE -12 SAE C 2 Bolt SAE C 14T

M350A 898 VR EB12 -07 52.2 SAE -12 SAE C 2 Bolt SAE C 14T

M350A 898 VN EB15 -07 62.7 SAE -16 SAE C 2 Bolt SAE C 14T



M350A 898 VN EB22 -07 94 SAE -16 SAE C 2 Bolt SAE C 14T


1.25 Keyed Shaft

M350A 898 VR EB07 -11 31.3

Bi-Rotational

SAE -12 SAE C 2 Bolt 1.25 KeyedM350A 898 VR EB10 -11 41.8 SAE -12 SAE C 2 Bolt 1.25 Keyed

M350A 898 VR EB12 -11 52.2 SAE -12 SAE C 2 Bolt 1.25 Keyed

M350A 898 VN EB15 -11 62.7 SAE -16 SAE C 2 Bolt 1.25 Keyed



M350A 898 VN EB22 -11 94 SAE -16 SAE C 2 Bolt 1.25 Keyed



19/26




P365 GEAR PUMPS

SAE C 4 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P365A 478 EG AB07 -0744.3

Clockwise

SAE 2 SAE 1



P365A 478 EG AB10 -0759

Clockwise


P365A 478 EG AB12 -0773.8

Clockwise


P365A 478 EG AB15 -0788.5

Clockwise


P365A 478 EF AB17 -07103.3

Clockwise

SAE 2 SAE 1

P365A 578 FE AB17 -07 Anti-clockwiseP365A 478 EF AB20 -07

118Clockwise

P365A 578 FE AB20 -07 Anti-clockwise

P365A 478 EF AB22 -07132

Clockwise


P365A 478 EF AB25 -07147.5

Clockwise


1.25 Keyed Shaft

P365A 478 EG AB07 -1144.3

Clockwise

SAE 2 SAE 1

SAE C 4 Bolt1.25

Keyed


P365A 478 EG AB10 -1159

Clockwise


P365A 478 EG AB12 -1173.8

Clockwise


P365A 478 EG AB15 -1188.5

Clockwise


P365A 478 EF AB17 -11103.3

Clockwise

SAE 2 SAE 1


P365A 478 EF AB20 -11118

Clockwise


P365A 478 EF AB22 -11132

Clockwise


P365A 478 EF AB25 -11

147.5

Clockwise



20/26




P365 GEAR PUMPS

SAE C 2 BOLT



Inlet Port

SAE Split Flange

Pressure Port


SAE C 14T Shaft

P365A 498 EG AB07 -0744.3

Clockwise

SAE 2 SAE 1



P365A 498 EG AB10 -0759

Clockwise


P365A 498 EG AB12 -0773.8

Clockwise


P365A 498 EG AB15 -0788.5

Clockwise


P365A 498 EF AB17 -07103.3

Clockwise

SAE 2 SAE 1

P365A 598 FE AB17 -07 Anti-clockwiseP365A 498 EF AB20 -07

118Clockwise


P365A 498 EF AB22 -07132

Clockwise


P365A 498 EF AB25 -07147.5

Clockwise


1.25 Keyed Shaft

P365A 498 EG AB07 -1144.3

Clockwise

SAE 2 SAE 1

SAE C 2 Bolt1.25

Keyed


P365A 498 EG AB10 -1159

Clockwise


P365A 498 EG AB12 -1173.8

Clockwise


P365A 498 EG AB15 -1188.5

Clockwise


P365A 498 EF AB17 -11103.3

Clockwise

SAE 2 SAE 1


P365A 498 EF AB20 -11118

Clockwise


P365A 498 EF AB22 -11132

Clockwise


P365A 498 EF AB25 -11

147.5

Clockwise



21/26




M365 GEAR MOTORS

SAE C 4 BOLT



Ports


SAE C 14 T Shaft

M365A 878 VN EB07 -07 44.3 Bi-Rotational

SAE -16


M365A 878 VN EB10 -07 59 Bi-Rotational



M365A 878 VC EB17 -07 103.3 Bi-Rotational

SAE -20M365A 878 VC EB20 -07 118 Bi-Rotational

M365A 878 VC EB22 -07 132 Bi-Rotational


1.25" Keyed Shaft

M365A 878 VN EB07 -11 44.3 Bi-RotationalSAE -16


M365A 878 VN EB10 -11 59 Bi-Rotational




SAE -20M365A 878 VC EB20 -11 118 Bi-Rotational

M365A 878 VC EB22 -11 132 Bi-Rotational


SAE C 2 BOLT


cc/rev Shaft RotationPorts


SAE C 14T Shaft

M365A 878 VN EB07 -07 44.3

Bi-Rotational

SAE -16


M365A 878 VN EB10 -07 59

M365A 878 VN EB12 -07 73.8

M365A 878 VN EB15 -07 88.5

M365A 878 VC EB17 -07 103.3

SAE -20M365A 878 VC EB20 -07 118

M365A 878 VC EB22 -07 132

M365A 878 VC EB25 -07 147.5

1.25"Keyed Shaft

M365A 878 VN EB07 -11 44.3

Bi-Rotational

SAE -16


M365A 878 VN EB10 -11 59

M365A 878 VN EB12 -11 73.8

M365A 878 VN EB15 -11 88.5

M765A 878 VC EB17 -11 103.3

SAE -20M365A 878 VC EB20 -11 118

M365A 878 VC EB22 -11 132

M365A 878 VC EB25 -11 147.5


22/26




30/50/75 SERIES SPARE PARTS

P30/M30

Part Number Description

3910381040 Outboard Bearing

3910381068 Roller Bearing3912185013 Thrust Plate Pump

3912185013 Thrust Plate Motor

3912585006 Ring Seal

3912882051 Seal Strip

3912883058 Pump Shaft Seal

3912883107 Pump Shaft Seal to suit C Shaft

3912883119 Motor Shaft Seal

3912883126 Motor Shaft Seal to suit C Shaft

3912884050 Housing Gasket

3913681001 Check Valve Assembly

P50/M50



3910381059 Roller Bearing

3912185012 Thrust Plate Pump










P75/M75




3912185020 Standard Thrust Plate

3912185040 Reduced Area Thrust Plate


3912881457 0- Ring (N0674 2-146)





3912883094 Motor Shaft Seal to suit C Shaft3912884024 Housing Gasket

3912885040 Reduced Area T/Plate Seal Rings


23/26




31/51/76 SERIES SPARE PARTS

P31/M31



3910381068 Roller Bearing3912082032 Dowel Pin











P51/M51Part Number Description



3912082032 Dowel Pin










P76/M76




3912082033 Dowel Pins




3912881457 0- Ring (N0674 2-216)



3912883052 Pump Shaft Seal to suit C Shaft3912883094 Motor Shaft Seal



3912885040 Reduced Area T/Plate Seal Rings


24/26




315/330 SERIES SPARE PARTS

P315/M315


3910482195 Bushing

3912082071 Dowel Pin3912185063 Pump Thrust Plate

3912185070 Motor Thrust Plate



3912883168 Pump Channel Seal


3912881995 Motor Channel Seal

3912881996 Motor Channel Seal (End)

3912881997 Motor Channel Seal (Side)


3913384313 Motor Seal Retainer

3912881429 Motor Housing Gasket

P330/M330



3910482306 Bushing

3912082032 Dowel Pin

3912185056 Pump Thrust Plate







3912881930 Motor Channel Seal (End)

3912881931 Motor Channel Seal (Side)3912884050 Pump Housing Gasket


3913381040 Motor Seal Retainer


25/26




350/365 SERIES SPARE PARTS

P350/M350



3910482308 Bushing3912082032 Dowel Pin










3912884074 Pump Housing Gasket


P365/M365



3910482307 Bushing

3912082062 Pump Hollow Dowel

3912082069 Motor Hollow Dowel





3912884052 Pump Housing Gasket


3912885064 Pump Viton Channel Seal

3912883176 Pump Channel Seal3912883177 Pump Channel Seal

3912885069 Motor Side Channel Seal

3912885070 Motor End Channel Seal


STANDARD SEAL KITS, SOFT SEALS ONLY

Series Single # Tandem # Triple #

P20 P20SK1 P20SK2 P20SK3

P30/31 P30SK1 P30SK2 P30SK3

P50/51 P50SK1 P50SK2 P50SK3P75/76 P75SK1 P75SK2 P75SK3

M20 M20SK1 M20SK2 M20SK3

M30/31 M30SK1 M30SK2 M30SK3

M50/51 M50SK1 M50SK2 M50SK3

M75/76 M75SK1 M75SK2 M75SK3

P315 P315SK1 P315SK2 P315SK3

P330 P330SK1 P330SK2 P330SK3

P350 P350SK1 P350SK2 P350SK3

P365 P365SK1 P365SK2 P365SK3

M315 M315SK1 M315SK2 M315SK3

M330 M330SK1 M330SK2 M330SK3

M350 M350SK1 M350SK2 M350SK3

M365 M365SK1 M365SK2 NA


26/26

TERMS & CONDITIONS OF TRADE

1. DEFINITIONS

1.1 Agreement means the terms and conditions contained herein.

1.2 Services means and includes all of the services to be provided by this

agreement.

1.3 Supplier means Lacedan Pty Ltd (ACN 100 965 204) carrying on

business as CFP Hydraulics including any subsidiary or affiliate

companies and its officers, servants, agents or subcontractors and their

employees;

1.4 Goods means the goods to be supplied under this agreement;

1.5 Customer means the person or persons on whose behalf or at whose

request the services and/or goods are to be provided under this

agreement.

2. APPLICATION

2.1 These terms and conditions (terms) of trade apply to every contractwith the Supplier subject to any written agreement by the Supplier to

modify the same signed by the Supplier.

2.2 These terms shall apply notwithstanding the receipt,acknowledgement or acceptance by the Supplier of any Purchase

Order issued by the Customer purporting to modify these terms.

3. CHARGES

3.1 The price involved on the Order Form is due and payable by the

Customer on the supply of the S ervices and/or Goods to the Customer.

If for any reason the Supplier is unable to provide all Services and/or

Goods due to no fault on the part of the Supplier then the Supplier

shall be entitled to a pro-rata payment of the amount invoiced in the

Order Form for the Services and for the full amount for any Services

and/or Supplied.

3.2 Unless otherwise specified goods and services tax (GST) and any

other applicable duties and charges imposed by any government or

statutory authority are additional to the price quoted and invoiced.

Where GST is included in a quotation it is based on the rate ruling at

the time of the quotation and any subsequent variation is to the

Customers account. Where GST is not included the Customer is liable

to pay such tax.

4. DELIVERY OF GOODS

4.1 The Supplier may charge the Customer a delivery fee for all or any

costs and expenses to and arising out of the delivery of any Goods to

the Supplier from any manufacturer or other supplier.

4.2 The Supplier may also charge the Customer a delivery fee for all or anycosts and expenses incurred to and arising out of the delivery of Goods

and Services to the Customer where delivery is to a place other than

the Suppliers premises.

4.3 Where Goods are to be collected by the Customer from the Suppliers

premises then the Goods must be collected within 5 days from the

date of notification from the Supplier to the Customer that the Goods

are ready for collection. If the Goods are not so collected then delivery

dates are approximate only. The Supplier is not liable for delay in

delivery howsoever caused. Time for delivery is not of the essence.

The Supplier may deliver in advance of the quoted delivery date (if

any).

5. RISK

5.1 Risk in the Goods passes to the Customer either:

(a) on collection of the Goods by the Customer; or

(b) at the time the Supplier notifies the Customer that the Goods

are available for collection; or

(c) where the Goods are to be delivered to the Customer on leaving

the Suppliers premises.

6. OWNERSHIP

6.1 Ownership of any Goods only passes to the Customer when the

Customer pays all sums owing to the Supplier under this and any othercontract.

6.2 Where the Supplier delivers the Goods to the Customer and moneys

are still outstanding to the Supplier, then, until the Goods are disposed

of by the Customer in accordance with the provisions of this clause,

the Customer agrees with the Supplier to keep as a fiduciary for the

Supplier and, if required, store the Goods in a manner that clearly

shows the ownership of the Supplier.

6.3 The Customer may sell the Goods to a third party in the normal course

of business and deliver them to that third party whereupon:

(a) if the Customer is paid by that party, the Customer holds the

whole of the proceeds of sale of those Goods on trust for the

Supplier; and

(b) if the Customer is not paid by that third party, the Customer

agrees at the option of the Supplier to assign his claim against

that party upon the Supplier giving the Customer notice in

writing to that effect.

6.4 For the purpose of giving effect to the performing the agreement

specified in paragraph 6.3(b) the Customer irrevocably appoints the

Supplier as his attorney.

6.5 The provisions of this clause apply notwithstanding any agreement,

whether subsequent to this agreement or not, between the parties

under which the Supplier gives the Customer credit.6.6 Where:

(a) the Customer or the Supplier repairs an object or makes a new

object from the Goods;

(b) the Customer or the Supplier mixed the Goods with other

objects; or

(c) the Goods become part of other objects, then the ownership of

new or the other objects immediately passes to the Supplier and

the Customer is to hold the new object or other objects as a

fiduciary for the Supplier.

6.7 The ownership of the new object or other objects passes to the

Supplier at the beginning of the single operation or event by which the

Goods are converted into a new object, is mixed or becomes part of

another object (called New Object).

6.8 Until the Supplier has been paid all moneys owing under this or any

other Contract, the Buyers agrees with the Supplier to keep the New

Object as fiduciary for the Supplier and, if required by the Supplier to

store the New Object in a manner that clearly shows the ownership of

the Supplier.

7. DELIVERY AND COMPLETIONS OF SERVICES

7.1 The Customer acknowledges and agrees that the Supply of any Services

to the Customer for the installation repair or maintenance of an object

or in the possession of the Customer shall be in accordance with the

design and specifications of the original manufacturer of the object

wherever possible unless the Supplier is otherwise directed by the

Customer.

7.2 Where the Customer requires the Supplier to design any object for

installation repair or maintenance purposes the Supplier shall have the

right to require the Customer (at the Customers cost) to obtain such

expert services as is necessary including engineers specifications or

drawings in order to ensure that the design and specifications meet

relevant safety standards. The Supplier does not hold itself out as

having necessary expertise and to the fullest extend permissible by the

law accepts no responsibility for the design and specifications.

7.3 It shall be the responsibility of the Customer to provide wherever

possible the specifications of the original manufacturer of the object

and any manuals and other documents which relate to the object.

These are to be provided to the Supplier prior to the provision of the

Supply of the Services in relation to the object.

7.4 Where the Customer requires the Object to be installed required or

maintained in a modification of the manufacturers specifications for

the object it shall be the responsibility of the Customer to ensure that

such modification is legal. The Supplier accepts no responsibility for

modification to an object to be outside the manufacturers

specifications unless the manufacture has provided in writing approval

to such modifications.

7.5 The Customer acknowledges that where the object is to be modified by

the Supplier, the Supplier shall be indemnified by the Customer for any

loss or damage which the Customer suffers as a result of the

modification.

7.6 The Supplier shall use its best endeavours to supply the Services and

Part on the times and dates specified but shall not be liable for anydelays whatsoever.

8. LIABILITY OF SUPPLY

8.1 The Supplier is not responsible or liable for:-

(a) The workmanship of Goods Supplied, however the Supplier shalluse its best endeavours to ensure that the Goods provides or

assigns warranties in relation to the Goods to the Customer;

(b) Any faults or defects in the Goods;(c) The quality and/or performance of the Goods which were

purchased by the supplier from the manufacturer; or

(d) Delay in performance or non-performance of this Contract ordirectly or indirectly caused by fire, explosion, accident, flood,

labour trouble, stoppage or strikes, shortages, acts of war or

hostilities by any Government Agencies, inability to obtain

suitable materials, equipment, fuel, power or transport at

current prices, or act of God or arising from contingencies

happening or causes beyond the control of the Supplier.

8.2 Any Goods or services affected by any matters outlined in the

preceding clause may be eliminated by the Supplier from this contract

without liability for breach thereof but this contract shall otherwise

remain unaffected.

9. SUPPLIERS AND WARRANTIES9.1 Nothing herein shall exclude, restrict or modify any terms, conditions,

warranty or liability implied into this contract by statute, where to do

so would render any provisions of this contract void.

9.2 Subject to the preceding clause the Suppliers liability for the supply of

Services and/or Goods limited to the warranties compulsorily imposed

upon the Australian Consumer Lawor other Statute and any implied

conditions warranties and liabilities including for consequential loss or

for loss arising from negligence are hereby excluded.

9.3 Where it is legally permitted, any remaining liability implied by statute

or resulting from a breach of any condition or warranty implied by

statute is limited to replacement of the Goods or re-supply of the

Services at the Suppliers option.

10. ASSIGNMENT

10.1 The Customer cannot assign its interest in the contract.

11. NOTICES

11.1 A party hereto shall be deemed to have received a document

mentioned herein on the day such document is delivered or, if posted

on the second day after posting.

12. SUBCONTRACT

12.1 The Supplier shall be entitled to subcontract on any terms the whole or

any part of the order for the supply of Goods and/or Services.

SPECIAL CONDITIONS

These are special conditions which form part of the Terms of Supply. To the

extent of any inconsistency these special conditions shall prevail. For the

purposes of this agreement The Works shall mean all action reasonably

necessary to supply the Services and or Goods and anything reasonably

incidental thereto.

13. LIMITATIONS AND EXCLUSIONS

13.1 If the Customer is a consumer under the Australian Consumer Law

(and/or any equivalent state fair trading legislation) (The Act) then:-

(a) The Customers right under the Act are excluded, restricted ormodified by anything herein;

(b) The Suppliers liability for the supply of Goods and/or Services islimited to one or more of the following at the election of the

supplier:-

(1) The replacement of the Goods or the S upply of equivalentGoods and/or repair of the Goods.

(2) The payment of the cost of replacing the Goods oracquiring equivalent Goods or the payment of the cost of

having the Goods repaired.

(3) The Supply of the Services again; or(4) The payment of the cost of having services supplied again.

13.2 Goods not manufactured by the Supplier are supplied on the basis that

the Supplier will assign to the Customer any rights under any warranty

to such, Goods from the manufacturer and/or others and the Supplier

is not liable for any loss or damage arising from any deficiencies or

defect in such Goods except to the extent that the warranties are

honored by the original manufacturer.

13.3 Subject to clause 8 and this clause 13 the Supplier is not liable to the

Customer for any loss or damages (including consequential loss) to the

Goods, object or other including any goods left by the Customer in the

Suppliers care and/or control or for the death or personal injury

howsoever arising which is suffered or incurred by the Customer

arising out of:-

(a) Any act or omission (whether negligent or otherwise) by the

Supplier while undertaking the Supply of the Goods and/or

services;

(b) Any breach of any contract or any bailment or other obligation

imposed on the Supplier in respect of the Supply of the Goods

and/or Services;

(c) Any misuse, abuse or incorrect use or lack of or defective

maintenance of any property of the Customer alter delivery of

the Goods and/or Services; or

(d) Faulty installation of any Goods by any third person engaged by

the customer; or

(e) Any representation as to the performance, the suitable

application or use of the Goods or otherwise in respect of the

Goods made by any employee or agent of the Supplier unless in

writing signed by an authorized person for the Supplier.

13.4 Subject to this clause 12, any implied conditions, warranties and

liabilities including for consequential loss and/or losses arising from

negligence are hereby excluded.

14. INDEMNITIES

14.1 The Customer will indemnify and save harmless the Supplier from and

against any expense, claim, loss or damage arising by the Supplier

because of any breach by the Customer if any of these Terms and

Conditions or to the Suppliers equipment or to property or person

which occurs due to any act or omission by the Customer.

14.2 For the purposes of clause 13.1 loss includes consequential loss of any

fine, levy, charge or any monetary imposition to which the Supplier

becomes liable as an incident to the supply of Goods or Services and/or

resulting by any breach by the Customer of this agreement.

15. PROJECTS

15. Persons and Property.

15.1 The parties acknowledge that for the provision of the Goods and/or

services one or more of the following may be necessary:-

(a) The operation of the object and any machinery part or device

whatsoever connected to or in relation to the object.

(b) The movement of the object by whatever means necessary

whether on land and/or on sea in whatever circumstances

considered necessary and appropriate by the Supplier.

(c) The carrying out of any rectification, alternation, adjustment,

repair or installation as is in the Supplier s opinion necessary to

give effect to the Customers instruction.

(d) Hiring, renting or leasing of suitable apparatus and or premises

including hard stand from third party.

(e) Obtaining of government statutory licenses or approvals and/or

compliance with a number or statutory and regulatory

requirements.

15.2 The Customer agrees to and authorizes the Supplier to:-

(a) Take all action reasonably necessary to provide the Services and

or supply the Goods;

(b) Operate its machinery, Goods, devices and/or the object

whatsoever;

(c) Move any object by whatever means necessary whether on land

or on sea in whatever circumstances as the Supplier considers

necessary and appropriate.

(d) Carry out any rectification, alteration repair or installation as in

the Suppliers opinion necessary to give effect to the Customers

instructions.

16. RISK16.1 Risk of damage to or loss of Works rest with the Customers from the

date of this agreement.

16.2 Subject to the other terms of this agreement, the Supplier is not liable

to the Customer for any loss or damage (including consequential loss)

to the works or the property of the Customer while in the care or

control of the Supplier or for the death or personal injury howsoever

arising which is suffered or incurred by the Customer arising out of:-

(a) Any act or omission (whether negligent or otherwise) by the

Supplier while undertaking the Works, or

(b) Any breach of any contract or other obligation imposed upon

the Supplier in respect by the Works undertaken by the Supplier.

17. INSURANCES

17.1 The Customer shall maintain in effect during the period whilst the

property of the customer is in the care or custody of the Supplier all

insurances as appropriate to the property including its operation,

including public liability insurance and workers compensation

insurance.

18. WORKPLACE HEATH AND SAFETY

18.1 A Customer shall comply with and ensure that it and its employees,

servants or agents comply with the Workplace Health and Safety Act or

equivalent legislation whilst the Supplier is performing the Works and

indemnifies the Suppliers against any liability or responsibility in

respect of any failure by the Customer or its employees, servants or

agents to comply.

19. HIRE, LEASE OR LICENCE

19.1 Unless otherwise agreed in writing, the Customer shall arrange for the

hire, lease or licensing of equipment and/or premises to enable the

Supplier to provide the Services or Goods.

19.2 The Customer shall arrange for the Supplier to have all necessary

access during working hours in order to carry out the Works.

20. ENVIRONMENTAL ISSUES

20.1 The Customer shall ensure that it and/or other relevant person/s shall

apply for and maintain all approvals, permits, licences and

authorisations which may be necessary under the Environmental

Protection Act Queensland 1994 and/or any other Environmental

Legislation (The Act) for and in relation to the exercise of its rights

and obligations under this agreement and to comply with all duties

under the Act.

DESIGNS AND MODIFICATIONS

21. INTELLECTUAL PROPERTY

21.1 Where the Supplier designs an object or part of an object for

construction, installation, repair or maintenance the intellectual

property in the designs including drawings, tracings, reproductions and

specifications shall remain the property of the Suppliers unless

otherwise agreed in writing. The Customer shall treat and maintain

confidential and secret all designs.

22. APPROVAL OF DESIGNS

22.1 It shall be the responsibility of the Customer to ensure that the designs

meet the Customers specifications and requirements. For this

purpose the Customer shall have the right to access the designs and to

take copies.

23. LOSS OF WARRANTY

23.1 The Customer acknowledges that any modifications to the Works

and/or Goods may result in the voiding of the warranties from

manufacturers and/or others. The Customer shall indemnify the

Supplier for any loss or damage suffered by the Supplier arising from

the voiding and or loss of such a warranty.

24. JURISDICTION

24.1 This agreement is governed by and is to be construed in accordance

with the laws of the State of Queensland.

25. DISPUTE RESOLUTIONS25.1 In the event of any dispute or difference arising between the Supplier

and the Customer, unless such dispute or difference is able to be

resolved by direct negotiations between the parties, it is agreed that

such dispute or difference shall be referred to mediation administered

by a person as the parties may determine by agreement or failing

agreement a person nominated by the President of the Queensland

Law Society. It is agreed that neither party will commence any Court

proceedings against the other unless and until their dispute has firstly

been referred to a mediation as stipulated aforesaid.

25.2 The parties hereto agree to submit to the nonexclusive jurisdiction of

the Courts Queensland.

commercial gear quick reference

Documents

pressure psi

pressure bar

housing size

gear width

quick refernce cfp06b1201

pumps motors05

page b1