Mechanics Trucks, Telescopic Cranes, and Lube TrucksCommercial Vehicles

2

Make the most of your fleet investment.

When your equipment is down and productivity and profits are on the

line, every minute counts. You need service vehicles that can get your

machines up and running in no time — every time. With strong and

reliable IMT® commercial vehicles in your fleet, you can keep minor service

issues from becoming major problems. Our vehicles offer ready support

in the field, maximizing uptime and extending the life of your fleet. Plus,

they’re supported by a nationwide network of dedicated distributors.

With IMT, you can count on superior performance every day, and

personal attention and service from industry experts. Trust IMT for

commercial vehicles that enhance your fleet.

Nothing Says Commitment Like The Diamond.™

3

4

The electrical control panel on the Dominator mechanics truck offers critical information at a glance.

Mechanics Trucks

Dominate the field

Designed with enhanced strength and stability for higher crane loads, as well as numerous configuration possibilities, our Dominator® mechanics trucks deliver raw power, flexibility, and work-saving features that competitors can’t come close to.

IMT Dominator trucks feature easy-access compartments with a patented shelf hanger system allowing the operator to reposition the shelves for more storage space. A built-in workbench comes complete with vises and vise plates, giving operators on-the-job versatility. The trucks also feature high-intensity work and compartment lights, providing superior light penetration for enhanced visibility.

For operators that use a crane, an energy-absorbing boom support dissipates energy created from the crane boom. This relieves pressure that would be transmitted to the sidepack top, preventing potential breakage and damage to the truck.

Add a multiplex electrical system with programmable logic, which increases electrical control capabilities while reducing the amount of wire used, and you have a Dominator truck that’s conquered the market in both strength and smarts.

5

Specifications Dominator Models

Maximum Body Rating

Total Compartment Storage Capacity Body Weight Compartment Depth

Load Bed Width

Minimum Chassis GVWR

DomCS with loadgate

12,000 ft-lb (1.7 tm) 120.5 – 142.2 cu ft (3.4 – 4 m3)

2200 – 2300 lb (998 – 1043.3 kg)*

22" (55.9 cm) 50" (127 cm) 15,000 lb (6803 kg)

DomCS without loadgate

20,000 ft-lb (2.8 tm) 120.5 – 142.2 cu ft (3.4 – 4 m3)

2500 – 2600 lb (1134 – 1179 kg)

22" (55.9 cm) 50" (127 cm) 15,000 lb (6803 kg)

DSC12 12,000 ft-lb (1.7 tm) 63.1 cu ft (1.8 m3) 1700 lb (771 kg) 15" (38.1 cm) 50" (127 cm) 10,500 lb (4762 kg)

DSC20 20,000 ft-lb (2.8 tm) 97.2 – 142.2 cu ft (2.8 – 4 m3)

1850 – 2300 lb (839 – 1043.3 kg)

22" (55.9 cm) 50" (127 cm) 10,500 lb (4762 kg)

Propane Body 39,000 ft-lb (6.7 tm) 76.2 cu ft (2.2 m3) 3700 lb (1678.3 kg) 22" (55.9 cm) 71.5" (182 cm) 17,500 lb (7938 kg)

I 52,000 ft-lb (7.3 tm) 97.2 – 170.9 cu ft (2.8 – 4.8 m3)

2728 – 3495 lb (1237 – 1585 kg)

22" (55.9 cm) 50" (127 cm) 15,000 lb (6803 kg)

II 75,000 ft-lb (10.4 tm) 133.5 – 211.4 cu ft (3.8 – 6 m3)

3722 – 4553 lb (1688 – 2065 kg)

22" (55.9 cm) 50" (127 cm) 26,000 lb (11,793 kg)

III 80,000 ft-lb (11.1 tm) 173.4 – 202.4 cu ft (4.9 – 5.7 m3)

5478 – 5682 lb (2488.9 – 2577 kg)

24" (curbside) (61 cm)22" (streetside) (55.9 cm)

50" (127 cm) 33,000 lb (14,968 kg)

IV 95,000 ft-lb (13.3 tm) 198.9 – 272.6 cu ft (5.6 – 7.7 m3)

5758 – 7343 lb (2612 – 3330.7 kg)

24" (curbside) (61 cm)22" (streetside) (55.9 cm)

50" (127 cm) 33,000 lb (14,968 kg)

*Does not include loadgate weight.

6

All IMT telescopic cranes offer anti-two-block protection, overload shutdown systems, cylinder holding valves, and tethered or radio remote controls.

Telescopic Cranes

Sky-high performance

Our telescopic cranes are built for strength, reach, and control — no matter the location or application. With a maximum lifting capacity of up to 14,000 lb (6350 kg) and a horizontal boom reach of up to 30' 10" (9.4 m) — one of the longest in the industry — these ANSI-compliant cranes offer the winch speeds and precise handling your job requires.

Our cranes are compact to save cargo and storage space, and are powered by either PTO hydraulics or 12-volt electric power. They feature anti-two-block protection, overload shutdown systems, cylinder holding valves, an Axalta Imron Elite® paint job for optimal corrosion protection, and a variety of tethered, proportional, or radio remote controls to fit your personal preference.

Available for a wide variety of mounting applications, these cranes are the perfect complement to our Dominator mechanics trucks.

7

HY

DR

AU

LIC

EL

EC

TR

IC

Specifications Model Maximum Crane Rating Maximum Horizontal Reach Maximum Vertical Reach Maximum Lift Capacity Rotation

1015 10,500 ft-lb (1.7 tm) 15' (4.6 m) 16' 1" (4.9 m) 3200 lb (1450 kg) 400°

2020 20,000 ft-lb (2.8 tm) 20' (6.1 m) 20' 11" (6.4 m) 5000 lb (2268 kg) 400°

2820 28,000 ft-lb (3.9 tm) 20' 6" (6.2 m) 22' 1" (6.7 m) 5000 lb (2268 kg) 400°

6000 39,000 ft-lb (6.7 tm) 22' 6" (6.9 m)* 24' 8" (7.5 m)* 6000 lb (2722 kg) 400°

7500 52,000 ft-lb (7.3 tm) 30' 10" (9.3 m)* 32' 11" (10 m)* 7500 lb (3402 kg) 400°

8600 60,000 ft-lb (8.4 tm) 30' 10" (9.3 m)* 32' 11" (10 m)* 8600 lb (3901 kg) 400°

9500 68,000 ft-lb (9.5 tm) 30' 10" (9.3 m)* 32' 11" (10 m)* 9500 lb (4763 kg) 400°

10000 75,000 ft-lb (10.4 tm) 30' 10" (9.3 m)* 32' 11" (10 m)* 10,000 lb (4763 kg) 400°

12000 79,000 ft-lb (11.1 tm) 30' 11" (9.4 m)* 33' 1" (10.1 m)* 12,000 lb (4763 kg) 400°

14000 95,000 ft-lb (13.3 tm) 30' 11" (9.4 m)* 33' 1" (10.1 m)* 14,000 lb (6350 kg) 400°

3203i 12,000 ft-lb (1.6 tm) 15' (4.6 m) 16' 1" (4.9 m) 4000 lb (1815 kg) 360°

4004i 18,000 ft-lb (2.5 tm) 16' (4.9 m) 17' 2" (6.7 m) 4000 lb (1815 kg) 360°

5005i 30,000 ft-lb (4.2 tm) 22' (6.7 m) 23' 6" (6.7 m) 5000 lb (2722 kg) 360°

6006i 38,000 ft-lb (5.3 tm) 22' (6.7 m) 23' 6" (6.7 m) 6000 lb (3402 kg) 360°

* With flip sheave up

8

Each SiteStar is equipped with a full-width rear service compartment for easy, well-lit access to the entire dispensing system.

Polyethylene tanks

Steel tanks

Lube Trucks

Total flexibility

With a multitude of possible configurations, IMT SiteStar lube trucks not only carry fuel, oil, grease, antifreeze, and other fluids — they give you the versatility and flexibility you need, when and where you need it.

Our SiteStar lube trucks are designed to shield the tanks from harsh environmental elements, such as sleet and snow, wind and dust, and extreme temperatures, and are available with either impact-resistant and UV-protected polyethylene tanks or steel tanks. Their unique construction also prevents the introduction of particulate contamination into the fluid storage tanks.

Hydraulic dispensing systems with an optional remote control for oil products and air-operated dispensing systems for grease and salvage increase productivity, as do 108 cubic feet (3.06 m3) of above-deck storage compartments. For quick and easy fleet maintenance, the SiteStar lube truck shines!

9

PolyethyleneFluid Tank Capacity

• 75 gal (284 L)

• 135 gal (511 L)

• 190 gal (719 L)

• 260 gal (984 L)

• 350 gal (1325 L)

Steel Fluid Tank Capacity

• 50 gal (189 L)

• 60 gal (227 L)

• 85 gal (322 L)

• 100 gal (379 L)

• 115 gal (435 L)

• 175 gal (662 L)

• 235 gal (890 L)

Steel Fuel Tank Capacity

Rectangle

• 480 gal (1817 L)

• 650 gal (2460 L)

• 800 gal (3028 L)

• 950 gal (3596 L)

Elliptical

• 1000 – 3000 gal (3785 – 11,356 L)

Available Product Systems

• Oil

• Antifreeze • Water • Fuel• UREA/DEF

• Oil Salvage• Antifreeze

Salvage• Grease

• 275 gal (1041 L)

• 295 gal (1117 L)

• 350 gal (1325 L)

• 415 gal (1571 L)

• 480 gal (1817 L)

• 650 gal (2461 L)

• 800 gal (3028 L)

10

Adjustable shelves for storage of multisized components

Roomy crane box for electric controls and air system components (Dominator only)

Rotary screw or reciprocating compressors for both intermittent-duty and continuous-duty needs

Complete Systems Integration

11

Everything in its place

IMT gives you unmatched storage and accessory options for our mechanics trucks, telescopic cranes, and lube trucks.

Spacious drawer sets and bolt bins for everyday tools and accessories

Hydraulically driven generator for a variety of off-site power needs

Space to hold oxygen/acetylene tanks securely (Dominator only)

Optional radio remote control can operate the crane without being tethered to the unit. Available for 1015, 2020, 2820, 3203i, 4004i, 5005i, and 6006i cranes.

Pistol grip handle is ergonomic while increasing comfort and decreasing hand fatigue and is available with joystick or toggle switch controls for models 6000 – 14000 cranes.

Adjustable shelves and high intensity lighting for storage of small components

Compressor, welder, and generator engineered as a single unit for space and cost savings, reduced weight

Lube skid for easy job site delivery of oil, coolant, and water

Optional welding accessories for repairs in the field

12

Dedicated to delivering the best products and service.

We began in 1961, providing innovative tread designs for retreaded

tires. Since then, we have evolved into a leading manufacturer of

truck-mounted cranes, mechanics trucks, lube trucks, tire trucks, and

air compressors for building supply, construction, tire service, public

works, equipment dealers, mining, railroad, rental, and propane

markets around the world.

For more than 50 years, IMT has remained unwavering in its

commitment to produce the highest-quality products in the industry.

IMT’s mission is simple: to be a successful, people-oriented company serving global equipment markets. As

an organization, we strive to become your supplier of choice by offering products and services that set the

standard of excellence in quality, value, and performance.

In addition to the products in this brochure, we offer the following:

IMT articulating cranes feature impressive lift-to-weight ratios

and are recognized for proven reliability. You’ll get a wide range of lifting

capacities, hydraulic reaches, and application-specific designs.

The IMT TireHand® is the industry

standard for installing and rotating massive tires

in the mining and construction industries. Choose

from loader, forklift, or hydraulic crane-mounted

options to ensure a perfect fit to the job.

Our Commander® series of tire trucks includes our

powerful TireHand tire manipulator, plenty of storage, and a fully

engineered compressed air system, all to get your customers up and

running faster than ever. Choose from four models for mining, road-

building, ag, and other applications.

IMT hydraulic loaders provide

excellent lift capacity, extensive reach,

precise maneuverability, and exceptional

operator visibility, so they’re ideal

for handling virtually any stacked or

palletized material — even in tight places.

13

IMT pays close attention to detail when it comes to product design,

manufacturing, testing, and support. We listen to our customers, using your

feedback to meet your expectations and exceed industry standards. We

incorporate work-saving features into all our products to make your job

easier and your projects more profitable.

Comprehensive capabilities

Our design and testing processes include finite element analysis, strain gauge testing, and life expectancy

testing. Our world-class production techniques include one-piece flow production, KanBan supermarket

inventory management, and lean manufacturing. We have cutting-edge equipment to support our fabrication

processes, robotic welding, machining operations, multistage paint systems, and final-stage assembly lines.

And we have a comprehensive testing and quality control

process, all of which work together to give our equipment its

superior qualities. Nothing is left to chance, so you can have

the utmost confidence in our products.

Manufacturing process

We begin with laser technology

to ensure superior edge quality

and dimension control in our steel-cutting process. We then use robotic

welding for precise weld control and increased production. State-of-the-art

machining centers make sure all boom and cylinder pins fit properly and all

bearing surfaces are precise. Our multistage paint process cleans and paints

the components, then bakes the paint for a complete finish. The product is then assembled on our one-

piece flow final stage assembly line before undergoing a final comprehensive test process to ensure that the

finished product meets our quality standards.

IMT offers the most dependable surface protection in the

industry: Axalta Imron Elite polyurethane finish, which is

known for its long-lasting gloss, durability, and chemical

resistance. Preparation is key, so after rotoblasting to remove

all mill scale and rust, we employ a five-step prep process:

chemical prewash, water rinse, phosphatizing, water rinse,

and a reverse osmosis rinse that eliminates mineral deposits.

The strength of commitment

14

From there, highly trained technicians apply the coatings, which have the most

advanced UV screeners and light stabilizers to stand up to rough weather and

industrial chemicals. Not only does Axalta Imron Elite retain gloss and clarity of

finish, it also resists chips, abrasions, chemicals, and pollutants.

Distributor network

It’s hard to tell which is stronger — our products or our

distributor network. IMT has been in business for more than

50 years, all thanks to a distributor network that’s second

to none. Throughout the world, IMT distributors offer fast,

knowledgeable service and the ability to help customers find

the right IMT product for every application.

Diamond Shield warranty

Our optional Diamond Shield™ warranty protects your

investment — the body, crane, and compressed air system

on qualified IMT commercial vehicles — for a full 36 months, and keeps you running like new with

genuine IMT parts for planned maintenance intervals.

Oshkosh Corporation

In 2006, IMT was purchased by Oshkosh Corporation, a leading manufacturer of

specialty trucks for commercial, fire and emergency, and military applications.

Because Oshkosh follows a strategy of acquiring only market leaders, our brand

equity, industry reputation, and leadership position made IMT a natural choice for

this well-respected company.

As a wholly owned subsidiary of Oshkosh Corporation, IMT has gained access to customer financing,

additional buying power, and the best practices of the company’s

market-leading brands. This has enhanced our own position in the

marketplace, and has given us even more reason to say that when

you’re looking for exceptional equipment and superior service,

look to IMT.

Nothing Says Commitment Like The Diamond.™

15

Notes

Nothing Says Commitment Like The Diamond.™ IMT has been meeting the needs of our customers for over 50 years, and none of it would have been possible without a distributor network that’s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you’re looking for reliable equipment and dependable service, remember IMT.

IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, the IMT logo, Dominator, Site Star, TireHand, Commander and NOTHING SAYS COMMITMENT LIKE THE DIAMOND are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA. VALUEPLUS FLEET MANAGEMENT is a service mark of Iowa Mold Tooling Co., Inc. All other designated trademarks are the property of their respective owners.© 2016 Iowa Mold Tooling Co., Inc. All Rights Reserved.

01/16

Iowa Mold Tooling Co., Inc.500 Highway 18 West Garner, Iowa 50438800-247-5958 • www.imt.com