committed to fulfill industrial...

INTRODUCTION

OUR TEAM

MISSION & STRATEGY

OUR PRODUCTS

STOCK LINE

LIFTING MATERIAL

FABRICATION

COATING SERVICES

PRE-STRESS

CONTACTS

BEST FUTURE TRADING [email protected], Fax & Tel: +966 - (01 ) 3-361-6038, Mob: +966-54-5533005www.bestfuturetrading.net | Light Industrial Area 8262 | Dahran-Jubail Highway | Al-Jubail | K S A |

Best Future Trading is a local business that supplies different types of bolt and

nuts and other hardware items. We engaged in serving the industrial

world through the import of the entire range of industrial fastening

products. We offer our clients a multitude of products of a bewildering

array of specifications. These include U-Bolt, Center Bolt, Hub Bolts, T

Bolts, Studs, Cap Nut, Nuts, Wheel Spanner, Wheel Bracket, Spring Pin,

Pipes, Flanges, Fitting, Lifting, Threaded Rod and Round Bar. To answer the

customer's expectation and accomplishment of our company's

management policy "Products for the real benefit of customers", we are

promoting diversification of products and development of superior

products actively. Our commitment towards excellence by eliminating

defects and optimizing product delivery as well as handling, packaging

and scheduling meet the product needs of our customers adequately. A

strong commitment to quality is reflected across BFT in all its

undertakings where high standards are maintained at all stages. We have

in place very stringent quality monitor and assessment systems to ensure

that strict adherence to specifications and orders are complied. Our

various satisfied customers upon the receipt of their products have

testified this fact.

C.E.OMR.

MohammadAl-Shammari

ManagerMR. Junaid Malik

Finance OfficerMR. Fahed

Hassan

Business Development Officer

MR. Sheikh Rizwan

Production OfficerMR. Musheer

Ahmed

SupervisorMR. Khursheed

Ali


Our mission is to maximize trade potential in the region by

investing in human potential, customer relationships and use of

modern technologies.

The constant effort to improve the service provided to our

customers.

Availability of products of our principals at any time.

Constant monitoring of new trends, market demands and

customer needs.

Continued company growth.

Through efficient investment in human resources and

potentials create experts in every bussines segment


Specialized In:

Hex Bolts ,Nuts, Washers, Stud Bolts, Anchor Bolts, Threaded Roads,

Round Bars, Pipes, Fittings, Lifting and Silicon Bronze as per latest

specifications of ASTM, ASME, DIN Standards, Post Tensioning System

HEX BOLTS & NUTS:

ASTM A325 TYPE1 & TYPE3 with A563 GR-C/GR-C3 & DH3 NUTS and F-436

TYPE-1, TYPE-3 WASHERS.

ASTM A325M TYPE-1 with A563 CL 10S NUTS.

ASTM A307 GR-A & GR-B with A563 GR-A, GR-C NUTS.

ASTM A193 GR B-7/B7M with ASTM A194 GR-2H/2HM Nut

DIN 933/931 GR 8.8/GR 10.9 Bolts with DIN 934 CL8/CL10 Nuts & DIN 125 Washers.

DIN 6914 Bolts with DIN 6915 Nuts & DIN 6916 C-45 Washers in black,

Electro Galvanize, Hot Dip Galvanized, Cadmimum Plated, Floropolymer (PTFE) Coated.

S.Steel 304 & 316, B8C

COATING TREATMENTS:Floropolymer (PTFE) Coating Electro Galvanize, Hot Dip Galvanize,

Cadmimum Plating

SPECIAL BOLTS:Spline bolt in S. Steel, Electro Galvanize, Hot Dip Galvanize

Cone Screw in S.Steel, Electro Galvanize

Unbalanced neck screw in Electro Galvanize

Round head slotted MAC Screw in S.Steel Electro Galvanizem

Flange nut for Spline bolt in S.Steel, Electro Galvanize, Hot Dip Galvanize

Spring Nuts Long, Short and Springless in S. Steel, Electro

Galvanize, Hot Dip Galvanize

STUD BOLTS:Astm a307 w/a563 gr-c nuts

ASTM A193 B7/B7M W/ASTM A194-2H/2HM Nuts

ASME SA193-B7/B7M W/ASME SA194-2H/2HM Nuts

ASTM A193-B16 W/A194 GR-4 Nuts

ASTM A193-B8/B8M W/A194 GR-8/8M Nuts

ASTM A320-L7W/A194 GR-4 Nuts

ASTM A320 B8/B8M W/A194 GR-8/8M Nuts

AISI 304, 316

Black, Galvanized & Brass

POST TENSIONING SYSTEM

Our Hub Bolts are available in good quality and all sizes as per customer desire, drawing or sample.

Owing to the profound experience of varied aspects of the market, wehave been able to bring forth a range of T-Head Bolts. The products weoffer are designed and made by a team of skilled personnel, keeping theindustry laid norms in mind. These products are considered as synonymof rustproof construction and excellent finishing in the market.

U-BOLTS

HUB BOLTS

T-HEAD BOLTS

Our U bolts are available in steel alloys, carbon steel and stainless steelalloys. Zinc, Teflon®, Xylan®, Cadmium and hot dipped galvanized coatingsare offered for custom coating and finishing. Our cutting and chamferingservices will customize your U bolts to meet the tightest tolerances so thatyour finished product meets your exact requirements.

Being customers oriented enterprise, we work hard to bring forth aremarkable range of Studs. All our products are developed using bestquality alloys and metals that are sourced from certified vendors of themarket. The products offered by us are extensively utilized in severalindustries for fastening applications. These coated bolts are acknowledgedin the market for their resistance against corrosion, fine finishing andcapability of yielding higher output.

STUDS


We hold expertise in providing a vast range of Dome Nuts that isresistant to chemicals and temperature variations. These nuts aremanufactured using quality material and available in differentdimensions.

We are in the league of trust worthy enterprises that are offering a wide rangeof Hex Nuts. These are developed under the strict supervision of experiencedquality controllers in sync with national norms and guidelines. For meeting thediverse needs of the esteemed patrons, we offer these hex nuts in variousstandard shapes & sizes as well as in tailor-made forms. Moreover, the resistanceagainst wear & tear and excellent finishing of our nuts make these productsprime preference of numerous customers.

CAP NUTS

HEX NUTS

We are offering Spring Pin designed to replace Taper pins, straight pins,and set screws, they will also serve as a rivet, dowel, hinge pin or cotterpin in many applications. Plain or plated finishes available as well asstainless steel. Stocked in lengths to fit holes from .062" to .510".

SPRING PIN

We are one of the leading supplier of Thread Rod. We engaged in deliver quality product to our clients. These are made of finest quality stainless steel under strict quality control. Our range is highly acknowledged for its attributes of suitable tolerance, high performance, durability and high tensile strength. These are also available in various sizes to meet the different needs of the clients. They are highly durable, non-abrasive and anti corrosive in nature.

THREADED RODS


We offer a wide range of top quality Round Bars. High quality raw materialsand equipped with the latest advanced technologies these bars are verydurable and highly efficient. These stainless steel and A36 round bars arestain resistant, corrosion resistant and their unique designs make thempopular in national as well international market. The products are extensivelyused in construction industry as well as other commercial applications wherestrength reinforcement is necessary. Furthermore, we offer these products incompetitive prices.

ROUND BARS

We are engaged in offering a comprehensive range of Anchor Bolts, whichcan be customized as per the specification provided by our clients. Our rangeof product comes in various shapes, sizes & dimensions and is reckoned forits cutting edge features such as dimensional accuracy, longer service life andexcellent performance.

ANCHORS


FLOUROPOLYMAR COATING

ELECTRO GALVANIZING

BLUE/YELLOW PASSIVATIVE

CADMIMUM PLATING

NICKLE PLATING

HOT DIP GALVANIZING


POST - TENSIONING SYSTEMS BY KGN

Bonded Post-Tensioned concrete is the descriptive term for amethod of applying compression after pouring concrete and thecuring process (in situ).The concrete is cast around a plastic,steel or aluminum curved duct, to follow the area whereotherwise tension would occur element. A set of tendons arefished through the duct and the concrete is poured. Once theconcrete has hardened, the tendons, are tensioned by hydraulicjacks react against the concrete member itself. When thetendons have stretched sufficiently, according to the designspecification, they are wedged in position and maintain tensionafter the jacks are removed, transferring pressure to theconcrete. The duct is then grouted to protect the tendons fromcorrosion

Among the advantages of this systems over unbounded Post - Tensioning are:

Large reduction in traditional reinforcement requirements as tendons cannot distress in accidents.

Tendons can be easily “woven” allowing a more efficient design approach.

Higher ultimate strength due to bond generated between the strand and concrete.

No long terms issues with maintaining the integrity of the anchor/dead end.

Advantages of Post-Tensioned Slabs over conventional RCC slab:

Flexibility - Internal layout flexibility is greatly increased, making it much easier to place or repositionpartitions.

With framework stripping and redeploying and with less steel and concrete construction is fasterthan R.C.C. Construction. Spans up to 50% longer than those using RCC can be constructed withfewer support columns.

Offer resistance to cracking and water seepage due to limited deflection and highly compressivecharacteristics of prestressed concrete structure.

Post-Tensioning is also used in the construction of various bridges, both after concrete is cured after support by false work and by the assembly of prefabricated section, as in the segmental bridge.


Why Post-Tensioned Slabs instead of Conventional RCC slabs?

• Early post - Tensioning allows the frame work to be stripped and redeployed quickly.

• Significant saving on material, up to 30% on concrete alone with longer spans, fewer columns &thinner slabs producing lighter overall structure reducing foundation cost.

• Joint free ground slabs up to 1000 sqmt and true & level floor ideal or automated ware housing andsuper markets. A facility to span over poor ground conditions with full resistance to miningsubsidence.

• Water proof floors to eliminate unsightly staining of concrete fascias. Thinner slabs give more headroom.

Multistand Post - TensioningThe KGN multistrand system is charaterized bystandardized tendons units up to fifty 12.70 mm(0.5)” or 15.20 mm (0.6)” diameter strands with awide selections of anchorage types. Ducts are G.I. orPlastic. Cements or other type of grouting are used.Tendons lenght in advance. Manufactured on - siteor in factory with to determine tendon length inadvance. Simultaneous stressing of all strands in atendon applied, with individual locking of eachstrand at the anchorage point stressing is carried outin any number of phases with simple and reliableequipment for installation, stressing and grouting.

Bonded Slab Post - Tensioning

Today’s building owner and designers need to provide a high level of structural flexibility to meetchanging user requirements. Post-Tensing provides greater spans with reduced structural beam depths,resulting in large columns - free areas.

As a result, internal layout are not detected by tight column grids. Positive deflections and cracks controland if, if necessary, joint - free water - tight slabs, free designers from the limitation of traditionalreinforced concrete structures.

KGN Post - Tensioning is more economical than other system, especially when fast construction cyclesare envisaged. There less material handling on site and a reduced labour force, minimizing sitecongestions. Most importantly, there is the quality and service provided by KGN specialized highlyefficient team. The KGN bonded post – tensioning slab system has been used in many prestigiousbuildings. The System uses up to five contained in flat – shaped ducting, and anchorages, Strands areindividually stresses and gripped by wedge action. After stressing. The ducts filled with a cement groutthat fully bonds the strands to the surrounding concrete.


ROCK ANCHORING BY KGNKGN Anchors can be divided into two main categories - strendand bar anchors. The type of anchors

used depends on whether it is rock soil, for temporary or permanent use, whether or not it is to betensioned, and whether or not permanent corrosion protection is required.

KGN offers all of these alternatives and can support a full anchor material supply service (anchorsand accessories) with back-up including design services, advice consultancy,

testing, installation, tensioning and site supervision.

The construction of the KGN strand anchors depends on the type of application. (rock or soil), thedesign, the corrosiveness of the environment, the presence of stray electrical currents and theintended service life, while temporary ground anchors require limited or no corrosion protection,permanent ground anchor (with a service life exceeding two or three years) need to have acomprehensive permanent corrosion protection system.

Rock Anchoring work is carried out in the following steps:-1. Drilling2. Homing3. Primary Grouting (Fixed length grouting)4. Stressing5. Secondary Grouting

DrillingAs per the design requirement the location given on the drawing, drilling of the hole, vertical or inclined, is carried out using percussion DTH type drilling method. Drilling depth is taken as the fixed as the length plus free length plus extra depth of at least 300mm. If the wall of the hole is not standing by its own, a MS or PVC Casing is inserted in the Free length of the anchor and drilling of the fixed is then carried out. Hole should be flushed with water and compressed air, Hole should be checked for its depth.

HomingFabricated anchor is then slowly lowered in to the hole. Precaution should be taken so that anchor

should be remaining suspended at least 300 mm above the bottom of the hole. Anchor should be firmly secured at ground level with the help of clamp until the fixed length grouting is completed.

Primary Grouting (Fixed Length Grouting)Primary Grouting or fixed length grouting is carried out with neat cement using water cement ratio of 0.4 Admixture may be added if client permits. Pre measured quantity is pumped through HDPE dummy pipe with the help of electrically operated grout pump.


Secondary GrountingThe protruding length of HT strands are cut and the annular space

of the anchor including the free length portion is then grouted.The anchorage is the combined system of anchor head, bearing plate,and trumpet that is capable of transmitting the prestressing forcefrom the prestressing steel (bar or stand) to the ground surface or thesupported structured. The unbounded length is that portion of theprestressing steel that is free to elongate elastically and transfer

the resisting force bond length to the structures. A bond breaker is amonth plastic sleeve that is placed over the end on in theunbounded length to prevent the prestressing steel from bonding tothe surrounding grout. It enables the prestressing steel in theunbounded length to elongate without obstruction during testingand stressing and leaves the prestressing steel unbounded afterlock-off. The tendon bond length is that length of the prestressingsteel that is bonded to the grout and is capable of transmitting theapplied tensile load into the ground. The anchor bond length shouldbe located behind the critical failure surface. A prestressed groutedanchor is a structural element installed in soil or rock that is used totransmit an applied load into the ground. Ground anchors,referenced simply as ground anchors are installed in grout filled drillholes. Grouted anchors are also referred to as “tiebacks”

StressingStressing can be carried out only when grout has attained sufficient strength of 30 Mpa which

normally achieved in 21 days. For earlier strength Conbextra GP2 can be used. Extra length of the anchorKept for jacking is cleaned. Anchor plate is fixed on the cable.Anchor is then stressed using hydraulic jack of required capacity and anchor is locked in the anchor plate.


The basic components of a Rock Anchorincludes the:A) Based on the Anchorage Zone

Rock Anchors - Fixed length is anchored in the hard rockSoil Anchors - Fixed length is anchored in the Soil

B) Based on Nature of Structure

Permanent Anchors - Permanent ground anchors haveto guarantee their function during the lifetime of thestructures to be anchoredTemporary Anchors - Prestressed anchors, which have tofulfill theirs function only for a limited time.

C) Based on How it is installed

Vertical Anchors - These anchors are provided verticallyin to the groundInclined Anchors - These anchors are provided at anangle into the ground.



mailto:[email protected]

http://www.bestfuturetrading.net/

BFT Competitive Advantage includes engineering

and product designs featuring non-toxic materials,

eco-designs, and easier disassembly and

recycling. Further more, we adopted the

standards which are friendly with nature and

secure environment protection.


committed to fulfill industrial...

Documents