compac systems for food packaging

COMPAC SRL – Castelnovo di Sotto (RE) – Italia Tel. +39.0522.688509 – Fax. +39.0522.688552 – www.compac.it – [email protected]

1


2

THE COMPAC SYSTEM

COMPAC in 10 years or more of experience in the packaging of fresh food has achieved a structured

and flexible system based on heat sealer machines that use wide ranges of trays and vessels (capacity

up from 250 ml to 3,000 ml) in different materials { polypropylene (PP) – cardboard + PET (CA) –

amorphous polyethylene terephthalate (APET) – crystalline polyethylene terephthalate (CPET) –

polylactic acid (PLA)} specific for various uses (hot and cold products that can be heated, cooked and

frozen) using heat sealing film reels peeling off, microperforated, antifog, neutral or printed.

C2MCS INOX

CARDBOARD+PET


3

THE COMPAC SYSTEM turned to the counter of the Fresh Food Products in the Distribution sales

outlets, in the catering industry and in the food preparation businesses (delicatessens, butchers, salami,

bakery, fruit and vegetables, fisheries), offers solutions and benefits for packaging activities for the sales

counter service and for take away. In particular:

For the Operator Bench

• Heat sealer machines safe, practical to use and clean, fast, because do not require the changing

mould but through a Sliding Selector , and a Rotating Selector (depending on the model

chosen) can hermetically seal a wide range of trays and vessels, optimizing the internal

organization of work and allowing with a single machine the food packaging ranging from

gastronomy (tray) to the salami (vessel);

• Size and range of containers designed to be functional for working (cooking pan) and for type of

product and related portions (mono / two / three / four / six);

• Unique film reel transparent with the same temperature of sealing on the various models of

machines with trays and vessels in (CA) – (CPET) for gourmet food by heat or cook, and trays

and vessels in (APET) for cold food.

For the Customer / End Consumer

• Trays and vessels with features as elasticity that offers total protection against breakage caused

by heavy handling or violent bumps, along with airtight guarantee the integrity of the product

during transportation from sales outlet to house. Moreover, the closure hermetic serves as a seal

of guarantee and indicates possible Package effraction;

• Film providing a surface of the pack turned to the consumer transparent, clean, clear, free from

condensation that is ideal for bench refrigerator and thus improve the presentation of the product;

• Trays and vessels that offering different features of use:

heating, cooking, refrigeration and freezing;

• Materials that can be collected to start energy recovery or recycling, while fully respecting the

environment.

For the Purchase Manager

• Cost of package (film and container) significantly lower than the container with lid. Moreover, the

container with lid does not allow food with liquid and does not feature of antifog;

• The machines can be used for the sales counter service and for take away;

• The relationship between quality service and cost of packaging is certainly high.

THE COMPAC SYSTEM is characterized by the high versatility and easy of use, by offering real benefits to

consumers and the employees to work. To make the most of the benefits of System COMPAC is necessary

correct information about the machines and materials to be able to offer that service and the value added that

similar systems do not reach.


4

C1NE SYSTEM

C2MCS SYSTEM

C3MH SYSTEM

POLYETHYLENE TEREPHTHALATE


5

HEAT SEALER MACHINES

C1NE

OPERATING SPECIFICATIONS

Structure in painted iron or in steel inox. Through a digital control panel, the setting of temperature and time of sealing is allowed. Possibility to seal 3 mouths of various sizes and different depths without changing the mould, thanks to the presence of a sliding selector in the drawer. Film reel protected inside the machine. Can seal trays and vessels in PP-CARDBOARD+PET-APET-CPET-PLA-CA+PLA with heat sealing film reel, antifog and not.

Technical Features : Total weight: 22 Kg (without reel); Power supply: single phase+earth; Power voltage: 220V±10%; Power frequency: 50Hz; Maximum installed power: 0,46 Kw; Overall dimension: (A-414mm) (B-207mm) (C-335mm) (D-612mm) (E-495mm); Minimum dimensions of worktable: (F-195mm) (G-275mm).

Lay the reel on the rollers once the drawer has been pulled out.

SLIDING SELECTOR for choosing the desire size of Series P1-P2-G containers. Grip the film with both hands and pull it towards you until the tray to be closed is completely covered, and close the drawer.

Film sealing cycle with automatic cutting. To start the cycle, simply lower the lever as far as it will go and then release. It will then elevate automatically in a few seconds (3), after sealing operations has been completed.


6

C2MCS

OPERATING SPECIFICATIONS

Structure in painted iron or in steel inox. Through a digital control panel, the setting of temperature and time of sealing is allowed.. Possibility to seal 5 mouths of various sizes and different depths without changing the mould thanks to the presence of a rotating selector (for Series P1-P2) and the presence of a sliding selector (for Series G-L-M) in the drawer. Film reel protected inside the machine. Can seal trays and vessels in PP-CARDBOARD+PET-APET-CPET-PLA-CA+PLA with heat sealing film reel and film sheets, antifog and not.

Technical Features : Total weight: 42 Kg (without reel); Power supply: single phase+earth; Power voltage: 220V±10%; Power frequency: 50Hz; Maximum installed power: 0,85 Kw; Overall dimension: (A-470mm) (B-270mm) (C-425mm) (D-755mm) (E-620mm); Minimum dimensions of worktable: (F-240mm) (G-295mm).

Lay the reel on the rollers once the drawer has been pulled out. ROTATING SELECTOR for sealing Serie P1-P2 trays with sheets.

SLIDING SELECTOR for choosing the desire size of Series G-L-M containers. Grip the film with both hands and pull it towards you until the tray to be closed is completely covered, and close the drawer.

Film sealing cycle with automatic cutting. To start the cycle, simply lower the lever as far as it will go and then release. It will then elevate automatically in a few seconds (3), after sealing operations has been completed.

Also available C2MRS, that model using only the film reel B2, and avoiding the use of sheets, can seal containers Series G-L-M through SLIDING SELECTOR.


7

C3MH

Structure in steel inox. Through a digital control panel, the setting of temperature and

time of sealing is allowed.

Multiformat. Possibility to seal 7 different formats of trays without changing the tool

thanks to the presence of a sliding selector (Series G - L - M - X) and internal drawer

(Series P1 - P2 - G - H).

Two Film reels. Can seal trays and vessels in PP-CARDBOARD+PET-APET-CPET-PLA-

CA+PLA with heat sealing film reel, antifog and not, and avoid the use of heat sealing

film sheets.

Total weight: 55kg (without

reel).

Power supply: single

phase+earth.

Power voltage: 220 V + 10%.

Power frequency: 50Hz.

Maximum installed power:

1100 W.


8

PACKAGING MATERIALS

TRAYS / VESSELS

TRAYS / VESSELS IN POLYPROPYLENE (PP)

SERIES ARTICLE OUTER DIMENSIONS CAPACITYmm ml C1NE C2MRS C2MCS C3MH

APR30T 137 x 95 x 30 250 X X XAPR45T 137 x 95 x 45 400 X X XAPR63T 137 x 95 x 63 500 X X XAPN45T 137 x 120 x 45 500 X X XAPN65T 137 x 120 x 65 700 X X XAPN82T 137 x 120 x 82 900 X X XAG25T 190 x 137 x 25 / X X X XAG38T 190 x 137 x 38 750 X X X XAG50T 190 x 137 x 50 1.000 X X X XAG70T 190 x 137 x 70 1.250 X X X XAG85T 190 x 137 x 85 1.500 X X X XAL25T 230 x 190 x 25 / X X XAL35T 230 x 190 x 35 1.250 X X XAL50T 230 x 190 x 50 1.750 X X XAL65T 230 x 190 x 65 2.250 X X XAM25T 260 x 190 x 25 / X X XAM35T 260 x 190 x 35 1.500 X X XAM50T 260 x 190 x 50 2.000 X X XAM65T 260 x 190 x 65 2.500 X X X


M

P1

P2

G

L

Trays / Vessels transparent (PP)

Suitable for the characteristics of the temperature resistance of the material to be used for heating food in microwave oven at a temperature less than +110 ° C. You can not use in traditional oven. To keep food in the container, use the refrigerator at temperatures not lower than 0 ° C. Do not use in the freezer to avoid breaking dangers resulting from manipulation or violent handling.


9

TRAYS / VESSELS IN CARDBOARD+PET (CA+PET)

SERIES ARTICLE OUTER DIMENSIONS CAPACITY

mm ml C1NE C2MRS C2MCS C3MHP2 VR45PC 137 x 122 x 45 500 X X X

VR33GC 192 x 140 x 33 500 X X X XVR45GC 192 x 140 x 45 750 X X X XVR75GC 192 x 140 x 75 1.250 X X X XV25LBC 232 x 192 x 25 / X X XVR45LC 232 x 192 x 45 1.500 X X XV20MBC 262 x 192 x 20 / X X XVR45MC 262 x 192 x 45 1.750 X X X

X VR45XC 322 x 192 x 45 2.250 X

G

L

M


Trays / Vessels (CA+PET) Suitable for the characteristics of the temperature resistance of the material to be used for heating food in the microwave oven and in the traditional oven. In particular in the traditional oven: - not used at temperatures above +175 ° C over 30 minutes. You can freeze food in the container until the temperature of -40 ° C.


10

TRAYS / VESSELS IN AMORPHOUS POLYETHYLENE TEREPHTHA LATE (APET) TRANSPARENT


GB30PTH 137 x 95 x 30 250 X X XGB45PTH 137 x 95 x 45 400 X X XGB63PTH 137 x 95 x 63 500 X X X

GB45PNTC 137 x 120 x 45 500 X X XGB65PNTC 137 x 120 x 65 700 X X XGB82PNTC 137 x 120 x 82 900 X X XGB25GTH 190 x 137 x 25 / X X X XGB38GTH 190 x 137 x 38 750 X X X XGB50GTH 190 x 137 x 50 1.000 X X X XGB70GTH 190 x 137 x 70 1.250 X X X XGB85GTH 190 x 137 x 85 1.500 X X XGB15LTH 230 x 190 x 15 / X X XGB25LTH 230 x 190 x 25 / X X XGB35LTH 230 x 190 x 35 1.250 X X XGB50LTH 230 x 190 x 50 1.750 X X XGB65LTH 230 x 190 x 65 2.250 X X XGB15MTH 260 x 190 x 15 / X X XGB25MTH 260 x 190 x 25 / X X XGB35MTH 260 x 190 x 35 1.500 X X XGB50MTH 260 x 190 x 50 2.000 X X XGB65MTH 260 x 190 x 65 2.500 X X XGB85MTH 260 x 190 x 85 3.000 X X


M

P1

P2

G

L

Trays / Vessels transparent (APET). You can not use in microwave or traditional oven. You can freeze food in the container until the minimum temperature of -40 ° C. The container, for the characteristics of high gas barrier of material APET is fit to be used for food packaging in MAP (Modified Atmosphere Packaging).

These informations are on the bottom of trays as “instructions” for the end users / consumers.


11

TRAYS IN CRYSTALLINE POLYETHYLENE TEREPHTHALATE (CP ET) WHITE / BLACK


P2 D45PB 120 x 136 x 45 500 X X XD38GB 190 x 136 x 38 750 X X X XD50GB 190 x 136 x 50 1.000 X X X XD70GB 190 x 136 x 70 1.500 X X X XD38MB 260 x 190 x 38 1.500 X X XD50MB 260 x 190 x 50 2.000 X X X

D45PN 120 x 136 x 45 500 X X XD65PN 120 x 136 x 65 750 X X XD38GN 190 x 136 x 38 750 X X X XD50GN 190 x 136 x 50 1.000 X X X XD70GN 190 x 136 x 70 1.500 X X X XD38MN 260 x 190 x 38 1.500 X X XD50MN 260 x 190 x 50 2.000 X X X


WHITE

BLACK

M

P2

G

G

M

Trays white / black (CPET). Suitable for the characteristics of the temperature resistance of the material to be used for heating food in the microwave oven and traditional oven. You can freeze food in the container until the temperature of -40 ° C. The container, for the characteristics of high gas barrier of material CPET is fit to be used for food packaging in MAP (Modified Atmosphere Packaging).

These informations are on the bottom of trays as “instructions” for the end users / consumers.


12

Trays and Vessels in Polylactic Acid (PLA) TRANSPARENT


GD30PTH 137 x 95 x 30 250 X X XGD45PTH 137 x 95 x 45 400 X X XGD63PTH 137 x 95 x 63 500 X X X

GD45PNTC 137 x 120 x 45 500 X X XGD65PNTC 137 x 120 x 65 700 X X XGD82PNTC 137 x 120 x 82 900 X X XGD25GTH 190 x 137 x 25 / X X X XGD38GTH 190 x 137 x 38 750 X X X XGD50GTH 190 x 137 x 50 1.000 X X X XGD70GTH 190 x 137 x 70 1.250 X X X XGD85GTH 190 x 137 x 85 1.500 X X XGD15LTH 230 x 190 x 15 / X X XGD25LTH 230 x 190 x 25 / X X XGD35LTH 230 x 190 x 35 1.250 X X XGD50LTH 230 x 190 x 50 1.750 X X XGD65LTH 230 x 190 x 65 2.250 X X XGD15MTH 260 x 190 x 15 / X X XGD25MTH 260 x 190 x 25 / X X XGD35MTH 260 x 190 x 35 1.500 X X XGD50MTH 260 x 190 x 50 2.000 X X XGD65MTH 260 x 190 x 65 2.500 X X XGD85MTH 260 x 190 x 85 3.000 X X


M

P1

P2

G

L

BIODEGRADABLE and COMPOSTABLE

TRAYS / VESSELS IN PLA COMPAC are compliant with th e criteria of certification:

Compliance certification "OK compost" including UNI EN13432: << Packaging - Requirements for

packaging recoverable through composting and biodeg radation - Test scheme and evaluation criteria

for the final acceptance of packaging >>

Trays / Vessels in (PLA) You can not use in microwave or traditional oven. The temperature range of usage is from O°C to + 40°C. Suitable packaging for cold products.


13

TRAYS / VESSELS IN CARDBOARD+PLA (CA+PLA)


P2 VR45PCD 137 x 122 x 45 500 X X XVR33GCD 192 x 140 x 33 500 X X X XVR45GCD 192 x 140 x 45 750 X X X XVR75GCD 192 x 140 x 75 1.250 X X X XV25LBCD 232 x 192 x 25 / X X XVR45LCD 232 x 192 x 45 1.500 X X XV20MBCD 262 x 192 x 20 / X X XVR45MCD 262 x 192 x 45 1.750 X X X

X VR45XCD 322 x 192 x 45 2.250 X

G

L

M


BIODEGRADABLE and

COMPOSTABLE

TRAYS / VESSELS IN CA+PLA

COMPAC are compliant with the

criteria of certification:

Compliance certification "OK

compost" including UNI EN13432:

<< Packaging - Requirements for

packaging recoverable through

composting and biodegradation -

Test scheme and evaluation

criteria for the final acceptance of

packaging >>

Trays / Vessels (CA+PLA) Suitable for the characteristics of the temperature resistance of the material to be used for heating food in the microwave oven and in the traditional oven. In particular in the traditional oven: - not used at temperatures above +175 ° C over 30 minutes. You can freeze food in the container until the temperature of -40 ° C.


14

FILM REELS / FILM SHEETS

(B1) - FILM REELS TRANSPARENT - C1 / C3 SYSTEMS

ARTICLE MATERIAL SPECIFICATIONS FOR TRAYS - VESSELS

TEMPERATURE OF USE – C°

B1T PP mono / sealing PP 150 B1TMF PP - MF mono / microperforated / sealing PP 150 B1TA PET / PP multilayer / sealing PP 170 B1TNAF PP - AF mono / antifog / sealing PP 150 B1TSB PET mono / sealing CA / APET / CPET 150

B1TPAF PET - AF mono / antifog / sealing-peeling off CA / APET / CPET 150

B1TP PET / PE multilayer / peeling off PP / CA / APET / CPET 135 B1TBP PET mono / peeling off PP / CA / APET / CPET 140




B2T PP mono / sealing PP 150 B2TMF PP - MF mono / microperforated / sealing PP 150 B2TA PET / PP multilayer / sealing PP 170 B2TNAF PP - AF mono / antifog / sealing PP 150 B2TSBMF PET - MF mono / microperforated / sealing CA / APET / CPET 150 B2TSB PET mono / sealing CA / APET / CPET 150 B2TPAF PET - AF mono / antifog /

sealing-peeling off CA / APET / CPET 150

B2TP PET / PE multilayer / peeling off PP / CA / APET / CPET 135 B2TBP PET mono / peeling off PP / CA / APET / CPET 140

FILM SHEETS TRANSPARENT: INDICATED FOR C2MCS SYSTEM



FT.P PP mono / sealing PP (Series P1) 150 FT.P2 PP mono / sealing PP (Series P2) 150 FT.G PP mono / sealing PP (Series G) 150

FT.AF.P2 PET - AF mono / antifog / sealing-peeling off

CA / APET / CPET (Series P2) 150

FT.AF.G PET - AF mono / antifog / sealing-peeling off

CA / APET / CPET (Series G) 150

FT.P2.BP PET mono / peeling off PP / CA / APET / CPET (Series P2) 140

FT.G.BP PET mono / peeling off PP / CA / APET / CPET (Series G) 140


15

Film Reel transparent (Neutral / Printed)

Compounds with different types of materials, cut in film reels in different lengths and heights, and with

different specifications (Mono, Multilayer, Antifog, Microperforated, Peeling Off, Sealing, Sealing-Peeling

Off). They are suitable for packaging of foodstuffs in combination with relative trays and vessels.

Film microperforated (MF)

In combination with cardboard containers are ideal for packaging food fried, allowing the way out of

vapour from the pack and preserve the fragrance of the product.

In combination with polyethylene terephthalate containers are ideals for fruit and vegetable sector,

allowing the way out of gas fermentation and avoid the swell of the pack.

Film antifog (AF)

This treatment allows you to see the product inside the container, avoiding the unaesthetic effect "fog" of

droplets spread. The antifog effect is particularly appreciated for the presentation and image of the

product inside the package. It is particularly used on cardboard and APET containers for food product in

refrigerator counter.

Film multilayer

The multilayer materials are produced mainly with the aim of combining the various properties of each

material.

Film peeling off

The advantage for the final consumer is the easy opening of the package.

Film Sheets transparent (Neutral / Printed)

Compounds with different types of materials, cut in various formats and with different specifications

(Mono, Sealing, Sealing-Peeling Off, Antifog). They are suitable for packaging of foodstuffs in

combination with relative trays and vessels.

Film Sheets antifog (AF)

This treatment allows you to see the product inside the container, avoiding the unaesthetic effect "fog" of

droplets spread. The antifog effect is particularly appreciated for the presentation and image of the

product inside the package. It is particularly used on cardboard and APET containers for food product in

refrigerator counter.


16

INSTRUCTIONS OF USE FOR OPERATORS / END CONSUMERS

IN COMBINATIONS WITH TRAYS / VESSELS (PP)

ARTICLE HOW TO USE

B1T / B2T Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. You can put in the

microwave, taking care to puncture the film before heating.

B1TMF / B2TMF

(MICROPERFORATED)

Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. Being microperforated,

is not to be used to seal foods containing liquids. No need to be drilled before heating the food.

B1TA / B2TA Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. You can put in the

microwave, taking care to puncture the film before heating. Suitable packaging for hot products.

B1TNAF / B2TNAF

(ANTIFOG)

Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. You can put in the

microwave, taking care to puncture the film before heating. Treatment antifog, minimizes the fogging

during refrigeration, and improving the visibility of the products exhibited.

B1TP / B2TP

B1TBP / B2TBP

FT.P2.BP / FT.G.BP

Not seal also in the presence of liquids (oil, water, etc..) on the edge of the container. You can put in the

microwave, taking care to puncture the film before heating. Not suitable packaging for hot products.

FT.P

FT.P2

FT.G

Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. You can put in the

microwave, taking care to puncture the film before heating.

IN COMBINATIONS WITH TRAYS / VESSELS (CA) / (APET) / (CPET)

ARTICLE HOW TO USE

B1TSB / B2TSB

Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. It can tolerate

temperatures in freezer up to -40 ° C, and can be used in microwave and conventional oven up to +180 °

C taking care to puncture the film before use.

B2TSBMF

(MICROPERFORATED)

Seal also in the presence of liquids (oil, water, etc..) on the edge of the container. Being microperforated,

is not to be used to seal foods containing liquids. No need to be drilled before heating / cooking the food.

B1TPAF / B2TPAF

(ANTIFOG)



C taking care to puncture the film before use. Treatment antifog, minimizes the fogging during freezing,

refrigeration, heating and cooking, and improving the visibility of the products exhibited.

B1TP / B2TP

B1TBP / B2TBP

FT.P2.BP / FT.G.BP

Not seal also in the presence of liquids (oil, water, etc..) on the edge of the container. Not suitable

packaging for hot products. You can put in microwave and traditional oven, taking care to remove the film

before heating. It can tolerate temperatures in freezer up to -40 ° C

FT.AF.P2 (ANTIFOG)

FT.AF.G (ANTIFOG)



C taking care to puncture the film before use. Treatment antifog, minimizes the fogging during freezing,

refrigeration, heating and cooking, and improving the visibility of the products exhibited.


17

IN COMBINATIONS WITH TRAYS / VESSELS (PLA) / (CA+PL A)

(B1) – FILM REELS TRANSPARENT - C1 / C3 SYSTEMS



B1TBFN PLA mono / sealing PLA / CA+PLA 85 / 90




B2TBFN PLA mono / sealing PLA / CA+PLA 85 / 90

FILM SHEETS TRANSPARENT: INDICATED FOR C2MCS SYSTEM

ARTICLE MATERIAL SPECIFICATIONS FOR TRAYS TEMPERATURE OF USE – C°

FT.PBFN PLA mono / sealing PLA (Series P1) 85 / 90

Film Reels transparent (neutral / customized printi ng)

Compounds in PLA, cut in film reels in different lengths and heights, and with different specifications

(Mono, Sealing). They are suitable for packaging of foodstuffs in combination with relative trays and

vessels. Both sides are sealable.

Film Sheets transparent (neutral / customized print ing)

Compounds in PLA, cut in various formats and with different specifications (Mono, Sealing). They are

suitable for packaging of foodstuffs in combination with relative trays and vessels. Both sides are

sealable.

BIODEGRADABLE and COMPOSTABLE

FILM REELS / FILM SHEETS IN PLA COMPAC are complian t with the criteria of certification:

Compliance certification "OK compost" including UNI EN13432: << Packaging - Requirements for

packaging recoverable through composting and biodeg radation - Test scheme and evaluation criteria

for the final acceptance of packaging >>


18

PAPER DISPENSER D1.1

PAPER DISPENSER D2

Technical Features : Total weight: 11,2 Kg (without roll); Maximum speed to unroll the paper: 20m/min; Maximum roll format usable: (width x diameter) 350mmx200mm; Power supply: single phase+earth; Power voltage: 220V±10%; Power frequency: 50Hz; Maximum installed power: 0,45 Kw; Overall dimension: (A-315mm) (B-460mm) (C-220mm) (D-612mm).

Paper Dispenser for roll paper. Structure in steel inox. The transparent front window allows the protection of the roll paper stored inside the dispenser and the control of paper consumption. Multiformat. Six different size formats programmed directly by the operator, that optimize the use of the pre cut paper. It allows a choice of various positioning (hung up, horizontal, vertical) to make more efficient space available to the Bench. Electric protection: IP54. Possibility of accessories.

Technical Features : Total weight: 20,5 Kg (without roll); Maximum speed to unroll the paper: 20m/min; Maximum roll format usable: (width x diameter) 400mmx190mm; Paper rolls height: from 350 to 400 mm; Power supply: single phase+earth; Power voltage: 220V±10%; Power frequency: 50Hz; Maximum installed power: 0,45 Kw; Overall dimension: (A-240mm) (B530mm) (C390mm).

Structure in painted iron. The transparent front window allows the protection of the roll paper stored inside the dispenser and the control of paper consumption.. Multiformat. Three different size formats that optimize the use of the pre cut paper. Possibility of different positioning with support on the floor. Possibility of accessories.


19

EXAMPLE OF PACKAGING TYPE Here we have tried to indicate an example of reasoned path to define the packaging type more functional to food product content.

SECTOR: Gourmet Product

Consume Example Sale

Typology Conservation Instructions COMPAC Packaging

Cold Rice Salad Sales counter service

(fridge) da +0° a+6°C Trays (PP) + Film (PP)

Cold Rice Salad Take Away (fridge) da +0° a+6°C Trays (APET) + Film (PET-AF)

Heated (max 200°C)

Melanzane alla

Parmigiana

Sales counter service

(fridge) da 0° a+6°C

Trays (CA) + Film (PET/PE) Trays (CPET) + Film (PET)

Heated (max 200°C)

Lasagne Cannelloni Take Away (fridge)

da 0° a+6°C Trays (CA) + Film (PET-AF)

(fridge) da 0° a+6°C Heated

(max 200°C) Roast Pork Take Away (freezer)

-20°C

Trays (CPET) + Film (PET-AF)

Heated (max 200°C)

Crocchette fries

Sales counter service

(fridge) da 0° a+6°C

Trays (CA) + Film (PET) Microperforated

SECTOR: Salami Product



Cold Salami sliced Sales counter service

(fridge) da 0° a+6°C Vessels (APET) + Film (PET)

Cold Salami sliced Take Away (fridge) da 0° a+6°C Vessels (APET) + Film (PET-AF)

SECTOR: Fruit and Vegetable Product



Cold Lettuce Take Away (fridge) da 0° a+6°C

Trays (APET) + Film (PET) Microperforated

Cold Cocco in pieces Take Away (fridge)

da 0° a+6°C Trays (APET) + Film (PET-AF)

Cold Carrots cut Take Away (fridge) da 0° a+6°C Trays (PLA) + Film (PLA)

SECTOR: Dairy Product



Cold Ricotta Sales counter service

(fridge) da 0° a+6°C Trays (APET) + Film (PET-AF)

SECTOR: Bakery Product



Cold Croissants Take Away (fridge) da 0° a+6°C Trays (APET) + Film (PET-AF)


20

COMPAC has created C26 SYSTEM to enable the Professional Operators to pack fresh food with the

tecnology of M.A.P. (Modified Atmosphere Packaging) , synonymous of natural freshness, through:

• range of heat sealer machine multisize Without Changing the Mould

(COMPAC PATENT)

• wide range of trays and vessels in APET transparent (gourmet -salami cold), and trays in CPET

white/black (gourmet to heating or cooking);

• film reels antifog sealing and/or peeling off, neutral or printed;

In summery these are the opportunities offered to the Professional staff:

• natural freshness thanks to use of natural gas like the ones used in the Food Sector that avoids or

limit physical or chemical stabilisation treatments;

• elimination of the unsold goods (take away);

• quality assured up to 7 days after the packing, maintaining unaltered the characteristics sanitation,

nutritional and organoleptic;

• optimization of internal production by not having to produce daily;

• perfect visibility and optimum exposition of the product through trays and vessels sealed by film

antifog;

• mono material packaging facilitate the collection and make the energetic and material recycle

possible.

FOOD PACKAGING IN MODIFIED ATMOSPHERE

(M.A.P.)

C26SE / SEC

C26E


21

The packaging technology in a modified atmosphere is a packaging system which involves the removal of

atmospheric gases from the pack and their replacement with a gas mixture predetermined and could prolong

the stability of foodstuffs. In recent years, its use has increased for the demand in the market for refrigerated

fresh foods with a long shelf-life. For all personnel involved in the packaging is crucial to be attentive to

possible risk factors. This packaging technology can not be preserved from contamination hygiene though,

when properly applied, can slow down the natural decay of food. There is also no improvement in initial

quality, but if we start from fresh produce high quality these conditions can be maintained for long. They must

then be followed appropriate procedures and controls for maximum length of shelf life. Checks temperatures

and good conditions of hygiene are very important factors for the extension of shelf-life, but the choice of

proper protective atmosphere can further implement. In particular, what makes this technology unique is the

active role that the packaging operation took in controlling the phenomena of decay. Not a simple protection

against agents of degradation as is the traditional packaging, neither the passive role of the pack, but the

possibility of intervening in controlling some decay phenomena. The choice of the gas mixture, barrier

materials and techniques adopted by the equipment is essential.

C26E


22

Features of plastics packaging: PET - POLYETHYLENE TEREPHTHALATE:

The POLYETHYLENE TEREPHTHALATE is a polymer divided into amorphous structure (APET) or crystalline

(CPET), depending on the speed of crystallization, has a low permeability to water and air, and also a

considerable inertia against food with which it comes in contact. The materials are in accordance with the

EC Regulation 1935/2004 for the Traceability and fo r the Conformity for food contact.

Describing the main techniques in a modified atmosphere packaging. They are:

• Gas flushing : in this technique the replacement of air inside the packaging is done through a

continuous stream of gas that dilutes the air around the product prior to the closing of the pack. The

great advantage of the technique of gas flushing is the speed that the machine can reach: working

continuous flow fact, productivity is very high. Moreover, the replacement of the case for dilution and

therefore there is a limit to efficiency of this technique, the typical residual oxygen is assessed by

around 1-3%, as a result if the product packaging is particularly sensitive to the presence of oxygen,

this technique may not be appropriate. It is also indicated for the packaging of products which require

high oxygen values such as red meat.

• Empty compensated the air is removed getting vacuum inside the container and then insufflating the

mixture gas desired. This procedure is completed in two steps then and consequently the speed of the

machine is less than one that uses the technique of gas flushing. In contrast, the air is completely

removed and not simply diluted: efficiency increases and the residual oxygen is significantly lower

even below the 0.5%. This technique is thus suitable for the packaging of sensitive products is

important.


23

HEAT SEALER MACHINE C26SE / SEC

TECHNICAL FEATURES

HEAT SEALER MACHINE for MAP. Vacuum / Gas through tank.. Stainless steel structure. Small dimensions.

Through a digital control panel, the setting of temperature and time of sealing, and vacuum degree is allowed.

Sealing and cutting are automatic, as unwinding / rewinding of film. Multiformat without changing the

mould.

Dimensions (mm):

A = 650 B = 940 C = 390 D = 790 E = 630

Minimum dimensions of worktable: Width.400 x depth.600 mm

HEAT SEALER MACHINE C26SE / SEC

Frame: inox steel

Weight: 146 kg approx. (whitout film reel).

Power supply: 230V 50Hz monophase + Earth

+ Neutral.

Maximum installed power: 2,1 Kw (included

vacuum pump)

Maximum current: 10A (included vacuum

pump)

Cycle vacuum/gas: with tank through

lubricated high vacuum pump integrated

Cycle time: 12 sec approx.

Changing moulds: immediate.

Sealable formats:

ModelC26SE - slot per Series G

(190x137), Series L (190x230) and Series M

(190x260) without changing tool, maximum

height 70;

Model C26SEC -

nr 1 slot per Series P1 (95x137 mm), series

P2 (120x137 mm) and

series G (190x137 mm)

without changing tool,

maximum height 70;

nr 1 slot per Series G (190x137 mm), Series L

(190x230 mm) and

Series M (190x260

mm) without changing

tool, maximum height

70.


24

PACKAGING MATERIALS

TRAYS / VESSELS IN AMORPHOUS POLYETHYLENE TEREPHTHA LATE (APET) TRANSPARENT

TRAYS IN CRYSTALLINE POLYETHYLENE TEREPHTHALATE (CP ET) WHITE / BLACK

SERIES ARTICLE OUTER DIMENSIONS mm C26SE C26SEC

TRANSPARENT TRAYS GB30PT 137x95X30 / X GB45PT 137x95X45 / X P1 GB64PT 137x95X63 / X

GB45PNT 137x120x45 / X P2

GB65PNT 137x120x65 / X GB38GT 190x137x38 X X GB50GT 190x137x50 X X G GB70GT 190x137x70 X X GB35LT 230x190x35 X X GB50LT 230x190x50 X X L GB65LT 230x190x65 X X GB35MT 260x190x35 X X GB50MT 260x190x50 X X M GB65MT 260x190x65 X X

TRANSPARENT VESSELS G GB25GT 190x137x25 X X L GB15LT 230x190x15 X X L GB25LT 230x190x25 X X M GB15MT 260x190x15 X X M GB25MT 260x190x25 X X

SERIES ARTICLE OUTER DIMENSIONS mm C26SE C26SEC

WHITE TRAYS P2 D45GB 136x120x45 / X

D38GB 190x136x38 X X D50GB 190x136x50 X X G D70GB 190x136x70 X X D38MB 260x190x38 X X

M D50MB 260x190x50 X X

BLACK TRAYS D45GN 136x120x45 / X

P2 D65GN 136x120x65 / X D38GN 190x136x38 X X D50GN 190x136x50 X X G D70GN 190x136x70 X X D38MN 260x190x38 X X

M D50MN 260x190x50 X X

You can not use in microwave or traditional oven. You can freeze food in the container until the minimum temperature of -40 ° C. The container, for the characteristics of high gas barrier of material APET is fit to be used for food packaging in MAP (Modified Atmosphere Packaging).

Suitable for the characteristics of the temperature resistance of the material to be used for heating food in the microwave oven and traditional oven. You can freeze food in the container until the temperature of -40 ° C. The container, for the characteristics of high gas barrier of material CPET is fit to be used for food packaging in MAP (Modified Atmosphere Packaging).


25

HEAT SEALING FILM REELS

ITEM MATERIAL DESCRIPTION GAS Barrier

B260TPAFH PET-AF Film reel Sealing / Peeling on CPET MONO - ANTIFOG MEDIUM

B26TAAPBX PET/PET-AF Film reel Peeling on APET - CPET MULTILAYER – ANTIFOG HIGH

B26TAAPBUX PET/PET-AF Film reel Peeling on APET - CPET

MULTILAYER – ANTIFOG - ANTIUV

HIGH

compac systems for food packaging

Documents