compact eng · pneumatics festo control panel siemens electrical cabinet layout suggestion
TRANSCRIPT
ComPact eng
Products
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
PalletizerType 121/128K
PalletizerType 121/128L
PalletizerType HC
Supply Conveyor, Driven Roller
ConveyorType IRFS 50
Drive UnitType IRUF 50
Tension UnitType IRSE 50
Belt ConveyorType IBGS 50-11
Drive UnitType IBED 50
Drive UnitType IBVD 50
Belt ConveyorType IBGS 50-21
Drive UnitType IBEU 50
Drive UnitType IBVU 50
Turning UnitType CVK- 90°
Turning UnitType CVK 180°
Turning UnitType CVK- HC
Infeed UnitType CIF
Infeed UnitType CIV
StopType IRSP 50-13
ComPact eng
Products
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Load UnitType CL
ChannelizerType Internal
Sheet Laying UnitType K/L
Pallet MagazineType IPSP 80
Pallet MagazineType IPSP 80-12
Pallet MagazineType IPGE 80
Pallet PusherType IRPR 80
Pallet Conveyor, Driven Roller
ConveyorType IRKS 80
Driven Roller Conveyor,
Accumulating,Type IRAS 80
Drive UnitType IRUK 80
Drive UnitType IRDS 80
Chain ConveyorType IKDS 80
Drive UnitType IKDM 80
Drive UnitType IKDU 80
Control PanelControl Panel
Electrical CabinetElectrical Cabinet
LayoutExample: 128K
LayoutExample: 128L
<< Back to first page ComPact eng
PalletizerType
ApplicationsIntended for palletizing productsautomatically on pallets. For: productssuch as boxes, trays, tote bins, etc.
DescriptionPalletizer consists of standard modulesthat are configured according to thecustomer’s needs. Standard modulesare designed in a compact format tominimize space requirements.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification Material/Type Finish OptionStand Steel Enamelled Stand Stainless steel XCasing Aluminium/Polycarbonate Anodized/Transparent Motor SEW/Gear drive Enamelled Pneumatics Festo Control panel SiemensElectrical cabinet Layout suggestion
Technical data
Example order
<< Back to first page ComPact eng
PalletizerType 121/128K
ApplicationsIntended for palletizing productsautomatically on pallets. For: productssuch as boxes, trays, tote bins, etc.
DescriptionPalletizer consists of standard modulesthat are configured according to thecustomer’s needs. Standard modulesare designed in a compact format tominimize space requirements. Type121/128K modules are designed forshort-side handling.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
SpecificationPos Name Basic Option (not shown on drawing)1. Supply conveyor X2. Turning unit 90%C2%B0 X2.1 Turning unit 180%C2%B0 X3. Infeed unit, fixed X3.1 Infeed unit, movable X4. Load unit X5. Control panel X6. Electrical cabinet XStop infeed conveyor Stop infeed conveyor XChannnelizer internal Channnelizer internal XSheet laying unit Sheet laying unit XPallet magazine Pallet magazine XPallet pusher Pallet pusher XPallet conveyors Pallet conveyors XLayout suggestion 121/128K Layout suggestion 121/128K
Technical data
Type121/128
Product heightMax.mm
Productunits/min
Load/layerMax.kg
Pallet formatmm
Pallet heightMax.mm
128K 350 4-30 2001200x8002x(600x800)4x(600x400)
2200
121K 350 4-30 200
1200x10001200x8002x(600x800)4x(600x400)
2200
350 4-30 200
1200x10001200x8002x(600x800)4x(600x400)
2200
<< Back to first page ComPact eng
Feed 3x400VAC TN-S system 16A. 6 bar 20-60 Nl/min 200
1200x10001200x8002x(600x800)4x(600x400)
2200
Example order
PalletizerType 121/128L
ApplicationsIntended for palletizing productsautomatically on pallets. For: productssuch as boxes, trays, tote bins, etc.
DescriptionPalletizer consists of standard modulesthat are configured according to thecustomer’s needs. Standard modulesare designed in a compact format tominimize space requirements. Type121/128L modules are designed forlong-side handling.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
SpecificationPos Name Basic Option (not shown on drawing1. Supply conveyor X2. Turning unit 90%C2%B0 X2.1 Turning unit 180%C2%B0 X3. Infeed unit,fixed X3.1 Infeed unit, movable X4. Load unit X5. Control panel X6. Electrical cabinet XStop infeed conveyor Stop infeed conveyor XChannelizer internal Channelizer internal XSheet laying unit Sheet laying unit XPallet magazine Pallet magazine XPallet pusher Pallet pusher XPallet conveyors Pallet conveyors XLayout suggestion 121/128L Layout suggestion 121/128L
Technical data
Type121/128
Product heightMax.mm
Productunits/min
Load/layerMax.kg
Pallet formatmm
Pallet heightMax.mm
128L 350 4-30 2001200x8002x(600x800)4x(600x400)
2200
121L 350 4-30 200
1200x10001200x8002x(600x800)4x(600x400)
2200
<< Back to first page ComPact eng
Feed 3x400VAC TN-S system 16A. 6 bar 20-60 Nl/min 200
1200x10001200x8002x(600x800)4x(600x400)
2200
Example order
PalletizerType HC
ApplicationsIntended for palletizing productsautomatically on pallets. For: productssuch as boxes, trays, tote bins, etc.
DescriptionPalletizer consists of standard modulesthat are configured according to thecustomer’s needs. Standard modulesare designed in a compact format tominimize space requirements.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
Material/Type Finish Option
Stand Steel Enamelled Stand Stainless steel XCasing Aluminium/Polycarbonate Anodized/Transparent Motor SEW/Gear drive Enamelled Pneumatics Festo Control panel SiemensElectrical cabinet
Technical data
Tel: +46 (0)431 44 91 [email protected]
Type HC121/128
Product heightMax.mm
ProductMaxunits/min
Load/layerMax.kg
Pallet formatmm
Pallet heightMax.mm
128L 350 60 200 1200x8002x(600x800) 2200
<< Back to first page ComPact eng
121L 350 60 2001200x10001200x8002x(600x800)
2200
350 60 2001200x10001200x8002x(600x800)
2200
Feed 3x400VAC TN-S system 16A. 6 bar 20-60 Nl/min 2001200x10001200x8002x(600x800)
2200
Example order
Standard modulesType IRFS 50
ApplicationsDriven roller conveyor Type IRFS 50 isintended for transport of products suchas boxes, trays, tote bins, etc.
DescriptionDriven roller conveyor Type IRFS 50 isintended for transport of products suchas boxes, trays, tote bins, etc.
Max Load50kg/unit and 100kg/m Depends onroller/support stand pitch
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Drive unit Type IRUF 50 Steel/Aluminium Zinc-plated/Anod. XStainless steel X
Tel: +46 (0)431 44 91 [email protected]
Technical dataRoller length EL 320, 420, 520 and 620 mmRoller diameter D 50mmRoller pitch T 75, 100, 200 and 300mmTotal length TL 600 - 8000 with 100mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IRUF 50
ApplicationsDrive unit Type IRUF 50 is intended forDriven roller conveyor Type IRFS 50.
DescriptionUnderslung drive unit for flat belt drive.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel/Aluminium Zinc-plated/Anodized Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeRoller lengthELmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IRUF 50 – 01 - 320 - 820 20 200 0.25 3 x 230/400 1.27/0.73IRUF 50 – 02 - 320 - 820 33 150 0.25 3 x 230/400 1.27/0.73 Example order
<< Back to first page ComPact eng
Standard modulesType IRSE 50
ApplicationsDrive unit Type IRUF 50 is intended forDriven roller conveyor Type IRFS 50.
DescriptionUnderslung drive unit for flat belt drive.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel/Aluminium Zinc-plated/Anodized Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeRoller lengthELmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IRUF 50 – 01 - 320 - 820 20 200 0.25 3 x 230/400 1.27/0.73IRUF 50 – 02 - 320 - 820 33 150 0.25 3 x 230/400 1.27/0.73 Example order
<< Back to first page ComPact eng
Standard modulesType IBGS 50-11
ApplicationsBelt conveyor Type IBGS 50-11 isintended for transport of products suchas boxes, trays, tote bins, etc.
DescriptionBelt conveyor Type IBGS 50-11 withslide bed for end drive.
Max Load100kg/m Depends on support standpitch.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Slide bed Sheet steel Galvanized Belt PVC Smooth XDrive unit Type IBED/IBVD 50 Steel Zinc-plated XStainless steel X
Technical dataInternal width EL 320, 420, 520 and 620 mmBelt width BB 290, 390, 490 and 590 mmTotal length TL 600 - 12000 with 100mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IBED 50
ApplicationsDrive unit Type IBED 50 is intended forBelt conveyor Type IBGS 50 -11.
DescriptionEnd-mounted drive unit, drum motortype.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Slide bed Sheet steel Galvanized Belt PVC Smooth XDrive unit Type IBED/IBVD 50 Steel Zinc-plated XStainless steel X
Technical dataInternal width EL 320, 420, 520 and 620 mmBelt width BB 290, 390, 490 and 590 mmTotal length TL 600 - 12000 with 100mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IBVD 50
ApplicationsDrive unitType IBVD 50 is intended forBelt conveyor Type IBGS 50 -11.
DescriptionEnd-mounted drive unit with wormgearbox motor.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeInternal widthBBmm
Speedvm/min
Drive cylinderØmm
Max.loadkg
Power kW
Voltage V
Amperage A
IBVD 50 – 320-620 17 102 100-200 0.25 3 x 230/400 1.27/0.73 Example order
<< Back to first page ComPact eng
Standard modulesType IBGS 50-21
ApplicationsBelt conveyor Type IBGS 50-21 isintended for transport of products suchas boxes, trays, tote bins, etc.
DescriptionBelt conveyor Type IBGS 50-21 withslide bed for underslung drive.
Max Load100kg/m Depends on support standpitch.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Slide bed Sheet steel Galvanized Belt PVC Smooth XDrive unit Type IBEU/IBVU 50 Steel Zinc-plated XStainless steel X
Technical dataInternal Width EL 320, 420, 520 and 620 mmBelt width BB 290, 390, 490 and 590 mmTotal length TL 600 - 8000 with 100mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IBEU 50
ApplicationsDriven unit Type IBEU 50 is intended forBelt conveyor Type IBGS 50-21.
DescriptionUnderslung drive unit with drum motor.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor Interroll/Drum motor Untreated Stainless steel X
Technical data
TypeInernal widthELmm
Speedvm/min
DrivecylinderØmm
Max.loadkg
Power kW
Voltage V
Amperage A
IBEU 50 – 320-620 18.6 113 100-125 0.18 3 x 380/420 063 Example order
<< Back to first page ComPact eng
Standard modulesType IBVU 50
ApplicationsDrive unitType IBVU 50 is intended forBelt conveyor Type IBGS 50-21.
DescriptionUnderslung drive unit with wormgearbox motor.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Worm gearbox Enamelled Stainless steel X
Technical data
TypeInernal widthELmm
Speedvm/min
DrivecylinderØmm
Max.loadkg
Power kW
Voltage V
Amperage A
IBVU 50 – 320-620 17 102 100-200 0.25 3 x 230/400 1.27/0.73 Example order
<< Back to first page ComPact eng
Standard modulesType CVK- 90°
ApplicationsTurning unit 90° is intended for turningproducts 90° when this is required forpattern building. For: products such asboxes, trays, tote bins, etc.
DescriptionRoller conveyor, flat-belt driven withadjustable driving force. Pneumaticproduct- turning arm.
Max Load20kg
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Pneumatics Festo Casing Alu./Polycarbon. Stainless steel X
Technical dataRoller length EL 600 and 800mmRoller diameter D 40mmRoller pitch T 50Total length TL 800mmNo./min st Approx: 15-25 turns depending on format and type of product Example order
<< Back to first page ComPact eng
Standard modulesType CVK 180°
ApplicationsTurning unit Type CVK 180° is intendedfor turning products 90-180° when this isrequired for pattern building. For:products such as boxes, trays, tote bins,etc.
DescriptionRoller conveyor, flat belt-driven withadjustable driving force. Pneumatic liftwith motor-driven product turner
Max Load20kg
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile,roller conveyor Aluminium Anodized
Pneumatics Festo Motor, turner SEW/Worm gearbox Stand Steel Zinc-plated Casing Alu./Polycarbonate Anodized/Transparent Stainless steel X
Technical data
Roller conveyorRoller lengthELmm
Roller diameterDmm
Roller pitchTmm
600 or 800 40 50
<< Back to first page ComPact eng
Turner No. of 180° turns /minst
Max.loadkg
Power kW
Approx:10-15Depends on format and type of product 20 0.18
Example order
Standard modulesType CVK- HC
ApplicationsTurning unit is intended for turningproducts +- 90° when this is required forpattern building. For: products such asboxes, trays, tote bins, etc.
DescriptionRoller conveyor, flat-belt driven withadjustable driving force. Pneumaticproduct- turning arm.
Max Load15kg
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
Material/Type Finish Option
Frame profile Aluminium Anodized Slide bed PEHD Smooth Belt POM Smooth Stainless steel X
Technical dataBelt width B 520-820 mmTotal length TL 800mm
Tel: +46 (0)431 44 91 [email protected]
No./min pcs Approx: 15-30 turns depending on format and type of product Example order
<< Back to first page ComPact eng
Standard modulesType CIF
ApplicationsInfeed unit Type CIF is intended for highinfeed of products and pattern buildingof layers.
DescriptionStandard module with roller conveyorand fixed infeed height. Motor-drivenpusher with chain transmission. Unit isequipped with service doors, which arefitted with door contact breakers.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile,roller conveyor Aluminium Anodized
Drive unit Type IRUF 50 Steel/Aluminium Zinc-plated/Anod.Stop Steel Zinc-platedMotor, pusher SEW/Worm gearbox Stand Steel Enamelled Casing Alu./Polycarbonate Anodized/Transparent Stainless steel X
<< Back to first page ComPact eng
Technical data
Roller conveyorRoller lengthELmm
Roller diameterDmm
Roller pitchTmm
600 or 800 50 75 or 100
Pusher No. of strokes/minMax.loadkg
Power kW
Depends on format and type of product 100 0.25 Example order
Standard modulesType CIV
ApplicationsInfeed unit Type CIV is intended for lowinfeed of products and pattern buildingof layers.
DescriptionStandard module with roller conveyorand movable infeed height. Motor-drivenpusher with chain transmission. Unit isequipped with service doors, which arefiited with door contact breakers.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile,roller conveyor Aluminium Anodized
Drive unit Type IRUF 50 Steel/Aluminium Zinc-plated/Anod.Stop Steel Zinc-platedMotor pusher SEW/Worm gearbox Stand Steel Enamelled Casing Alu./Polycarbonate Anodized/Transparent Stainless steel X
<< Back to first page ComPact eng
Technical data
Roller conveyorRoller lengthELmm
Roller diameterDmm
Roller pitchTmm
600 or 800 50 75 or 100
Pusher No. of strokes /minMax.loadkg
Power kW
Depends on format and type of product 100 0.25
Movableinfeed unit No. of strokes /min
Max.loadkg
Power kW
Depends on format and type of product 100 1.5Infeed height Min. 600mm 100 1.5 Example order
Standard modulesType IRSP 50-13
ApplicationsStop Type IRSP 50 - 13 is intended forroller conveyors Type IROS/IRFS/IRKS50. For: pattern building, etc.
DescriptionStop Type IRSP 50 - 13 is intended forroller conveyors Type IROS/IRFS/IRKS50. For: pattern building, etc.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
Material/Type Finish Option
Tel: +46 (0)431 44 91 [email protected]
Bracket/Fixings Steel Zinc-plated Pneumatic cyl. Festo Stainless steel X
Technical data
TypeRoller lengthELmm
Max. static loadFN
IRSP 50 - 13 620 1000IRSP 50 - 13 820 1000 Example order
<< Back to first page ComPact eng
Standard modulesType CL
ApplicationsLoad unitType CL is intended for patternbuilding and distribution of productlayers on pallets.
DescriptionStandard module with movabledistribution in X and Y axes. Pneumaticcontrolled compactor. Unit is equippedwith service doors, which are fitted withdoor contact breakers.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame Steel Zinc-plated/Anodized Pneumatics Festo Motor Y-movement SEW/Drive gear Motor X-movement Compact/Worm gear Channelizer Steel Zinc-plated XStand Steel Enamelled Casing Alu./Polycarbonate AnodizedTransparent Stainless steel X
<< Back to first page ComPact eng
Technical data
MotorY-movement No. of strokes/min
Max.loadkg
Power kW
Voltage V
Amperage A
Depends on format and type of product 200 1.5 3 x 230/400 6.15/3.55
MotorX-movement No. of strokes/min
Max.loadkg
Power kW
Voltage V
Amperage A
Depends on format and type of product 200 0.4 3 x 230/400 2.1/1.25 Example order
Standard modulesType Internal
ApplicationsChannelizer Type Internal is intended forload unit Type CL. For: pattern building,etc.
DescriptionChannelizer Type internal, pneumaticfolding stop.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
Material/Type Finish Option
Bracket/Fixings Steel Zinc-plated Pneumatic cyl. Festo Stainless steel X
Tel: +46 (0)431 44 91 [email protected]
Technical data
TypeWidthBmm
Max. static loadFN
K Depends on format and type of product 250L Depends on format and type of product 250 Example order
<< Back to first page ComPact eng
Standard modulesType K/L
ApplicationsSheet laying unit Type K/L is intendedfor placing sheets between layers. For:stabilization of pallets.
DescriptionSheet laying unit Type K/L, pneumaticmovement in X and Y axes with vacuumholder for sheets. Motor-driven retractorof sheets with pneumatic grippingdevice.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Bracket/Fixings Steel Zinc-plated Pneumatik cyl. Festo Stainless steel X
Technical data
TypeInfeed widthmax.mm
Sheet weightmin.G/m²
K 1200 150L 800 150 Example order
<< Back to first page ComPact eng
Standard modulesType IPSP 80
ApplicationsPallet magazine Type IPSP 80 isintended for buffering and distributingempty pallets.
DescriptionStand in steel, construction is designedin bent and welded sheet steel.Pneumatic lifting device.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Stand Sheet steel Zinc-plated Pneumatic cyl. Festo Stainless steel X
Technical data
TypePallet formatLxBmm
InfeedAmm
OutfeedBmm
OutfeedCmm
Capacity units/hr
IPSP 80 – 01 1200x800 820 880 1250 250IPSP 80 – 02 1200x1000 1020 1080 1250 250IPSP 80 – 03 1200x800 1220 1280 850 250IPSP 80 – 04 1200x1000 1220 1280 1050 250Max. load 300kg or 15 EUR pallets 1220 1280 1050 250
<< Back to first page ComPact eng
Example order
Standard modulesType IPSP 80-12
ApplicationsPallet magazine Type IPSP 80 -12 isintended for buffering and distributingempty pallets.
DescriptionStand in steel, construction is designedin bent and welded sheet steel.Pneumatic lifting device.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Stand Sheet steel Zinc-plated Pneumatic cyl. Festo Stainless steel X
Technical data
TypePallet formatLxBmm
InfeedAmm
OutfeedBmm
OutfeedCmm
Capacityhalf palletunits/hr
IPSP 80 – 12 (2x600)x800 820 880 1250 500Max. load 300kg or 15 EURpallets or 30 half pallets respectively 820 880 1250 500 Example order
<< Back to first page ComPact eng
Standard modulesType IPGE 80
ApplicationsPallet magazine Type IPGE 80 isintended for buffering and distributingempty pallets of various formats.
DescriptionPallet magazine is of fork type. Stand insteel, construction is designed in bentand welded sheet steel. Fork ispneumatic controlled. Electric motor-driven lift.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Stand Sheet steel Zinc-plated Pneumatic cyl. Festo Motor SEW/ Gear drive with brake Enamelled Stainless steel X
Technical data
Material/Type Finish Option
Stand Sheet steel Zinc-plated Pneumatic cyl. Festo Motor SEW/ Gear drive with brake Enamelled Stainless steel X Example order
<< Back to first page ComPact eng
Standard modulesType IRPR 80
ApplicationsPallet pusher Type IRPR 80 is intendedfor angled transfers and distribution ofempty pallets.
DescriptionFrame profile in steel, construction isdesigned in bent and welded sheetsteel. Motor-driven pusher with safetyclutch. Supplied as complete.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Sheet steel Zinc-plated Motor SEW/Worm gear Enamelled Stainless steel X
Technical data
TypePallet formatLxBmm
InfeedAmm
OutfeedB Cmm
Power kW
Voltage V
Amperage A
IRPR 80 – 01 1200x800600x800 820 1280 0.37 3 x 230/400 2.15/1.24
IRPR 80 – 021200x10001200x800600x800
1020 1280 0.37 3 x 230/400 2.15/1.24
Capacity 250 units/hr 1020 1280 0.37 3 x 230/400 2.15/1.24
<< Back to first page ComPact eng
Example order
Standard modulesType IRKS 80
ApplicationsDriven roller conveyor Type IRKS 80 isintended for transport of unit loadproducts such as pallets, etc.
DescriptionChain-driven roller conveyor.
Max Load1800 kg/m Depends on roller/supportstand pitch.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Steel Galvanized Cover cap Aluminium Anodized Stainless steel X
Technical dataRoller length EL 950 and 1150mmRoller diameter D 80mmRoller pitch T 150 and 200mmTotal length TL 600 - 12000 with 200mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IRAS 80
ApplicationsDriven roller conveyor, accumulating,Type IRAS 80 is intended for transport,buffering and separation of unit loadssuch as pallets, etc
DescriptionRoller conveyor, chain-driven withaccumulating rollers.
Max LoadRoller conveyor, chain-driven withaccumulating rollers.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Steel Galvanized Cove cap Aluminium Anodized Stainless steel X
Technical dataRoller length EL 950 and 1150mmRoller diameter D 80mmRoller pitch T 150 and 200mmTotal length TL 600 - 12000 with 200mm increments Example order
<< Back to first page ComPact eng
Standard modulesType IRUK 80
ApplicationsDrive unit Type IRUK 80 is intended forchain-driven roller conveyors TypeIRKS/IRAS 80.
DescriptionUnderslung drive unit for chain drive.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeRoller pitchTmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IRUK 80 – 11 - 150/200 10 2000 0.37 3 x 230/400 2.15/1.24IRUK 80 – 12 - 150/200 7,5* 3000 0.55 3 x 230/400 3.0/1.75*Frequency control recommended 150/200 7,5* 3000 0.55 3 x 230/400 3.0/1.75 Example orderTyp - T
<< Back to first page ComPact eng IRUK 80 – 11 - 200
Standard modulesType IRDS 80
ApplicationsDrive unitType IRDS 80 is intended forchain-driven roller conveyors TypeIRKS/IRAS 80.
DescriptionSide-mounted drive unit for chain drive.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeRoller pitchTmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IRDS 80 – 11 - 150/200 10 2000 0.37 3 x 230/400 2.15/1.24IRDS 80 – 12 - 150/200 7,5* 3000 0.55 3 x 230/400 3.0/1.75*Frequency control recommended 150/200 7,5* 3000 0.55 3 x 230/400 3.0/1.75 Example order
<< Back to first page ComPact eng
Standard modulesType IKDS 80
ApplicationsChain conveyor Type IKDS 80 isintended for transport of unit loads suchas pallets, etc.
DescriptionChain conveyor, load-bearing chainsslide against a wear strip of low-frictiontype. Options: 2-6 strings
Max Load1250 kg/m Depends on support standpitch.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Frame profile Steel Galvanized Cover cap Aluminium Anodized Chain 5/8” Duplex Wear strip PEHD Black Drive unit Type IKDD/IKDU 80 Steel Zinc-plated XStainless steel X
Technical dataCentre distance C/C 1050 mmTotal length TL 1000 - 8000 with 200mm increments
Example order
<< Back to first page ComPact eng
Standard modulesType IKDM 80
ApplicationsDrive unit Type IKDM 80 is intended forChain conveyorType IKDS 80.
DescriptionEnd-mounted drive unit for 2-stringedchain conveyor.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeCentre distanceC/Cmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IKDM 80 – 11 - 1050 10 1300 0.75 3 x 230/400 3.7/1.93 Example order
<< Back to first page ComPact eng
Standard modulesType IKDU 80
ApplicationsDrive unit Type IKDU 80 is intended forChain conveyor Type IKDS 80.
DescriptionUnderslung drive unit for 2-6 stringedchain conveyor.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Motor bracket Steel Zinc-plated Motor SEW/Gear drive Enamelled Stainless steel X
Technical data
TypeCentre distanceC/Cmm
Speedvm/min
Max.loadkg
Power kW
Voltage V
Amperage A
IKDU 80 – 01 1050 10 1300 0.75 3 x 230/400 3.7/2.15IKDU 80 – 02 1050 12 1100 0.75 3 x 230/400 3.7/2.15IKDU 80 – 11 1050 10 4000 2.2 3 x 230/400 8.6/4.95IKDU 80 – 12 1050 12 3000 2.2 3 x 230/400 8.6/4.95 Example order
<< Back to first page ComPact eng
Standard modulesControl Panel
ApplicationsControl panel is intended for applicationon or near Palletizer Type 121/128 formanoeuvring of equipment duringstart/stop, pattern selection oremergency situations.
DescriptionComponents are of proven quality andapproved in accordance with the low-voltage and EMC directive. Controlpanel with: operator panel, display withmenus for manual and automaticoperation, the display includes touchbuttons with explanatory text forcommands. Emergency shutdown, usedin cases of danger to people or risk ofdamage to the machine. Auxiliary supplyprepares the machine for start or stop.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Casing Aluminium Anodized/Enamelled Operator panel Siemens/Display Stand Steel/Aluminium Zinc-plated/Anodized Stainless steel X
Technical data
Type Casing classificationIP
Control panel 65
Example order
<< Back to first page ComPact eng
Standard modulesElectrical Cabinet
ApplicationsElectrical cabinet is intended forapplication on or near Palletizer Type121/128.
DescriptionComponents are of proven quality andapproved in accordance with the low-voltage and EMC directive. Electricalcabinet consists of a central plc-controlwhose input/output is linked with aconnection block or components in thecabinet. The emergency shutdown issimple to integrate in the line emergencyshutdown. 2 different stop circuits, onefor the machine’s doors and one for theemergency shutdown. Motor drives.Relays and inputs for signal exchangefor surrounding equipment such aspreceding machines or a stretch filmmachine after the palletizer.
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Material/Type Finish Option
Casing Steel Enamelled Casing Stainless steel Polished XPLC Siemens S7 Safety module Jokab Contactors Telemecanique Motor protector Telemecanique Frequency changer Telemecanique
<< Back to first page ComPact eng
Technical dataElectricalcabinet
PLC 96 inputs and 80 outputs
Emergencyshutdown
2-channel loop
Motor drives6, of which 1 reversing and 2 frequency changer-controlled. Option, 9 extra motordrives, of which 3reversing and 1 frequency changer-controlled
Frequencychanger 3x400V 1.5 kW
Controlvoltage 24VDC
Supply 3x400VAC TN-S system 16A.
Example order
Standard modulesExample: 128K
Description1.Infeed products 2.Outfeed loadedpallets 3.Infeed empty pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Specification
<< Back to first page ComPact eng
Standard modulesExample: 128L
Description1.Infeed products 2.Outfeed loadedpallets 3.Infeed empty pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules1
DescriptionPalletizer 128L (3) with joint empty palletmagazine and joint outfeed. 1. Infeedproducts 2. Outfeed loaded pallets 3.Infeed empty pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules2
DescriptionPalletizer 128L (2) with joint palletmagazine and separate outfeed. 1.Infeed products 2. Outfeed loadedpallets 3. Infeed empty pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules3
DescriptionPalletizer 128K Multi with empty palletmagazine and separate outfeed. 1.Infeed products 2. Outfeed loadedpallets 3. Infeed empty pallets 4.Transfer car with 2 pallet places
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules4
DescriptionPalletizer 128L with 2 empty palletmagazines and separate outfeed. 1.Infeed products 2. Outfeed loadedpallets 3.1 Infeed empty pallets (halfpallets) 3.2 Infeed empty pallets (EURpallets) 5. Half pallet lift, for loading ofhalf pallets on EUR pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules5
DescriptionPalletizer 128L (2) with 2 empty palletmagazines and separate outfeed. 1.Infeed products 2. Outfeed loadedpallets 3. Infeed empty pallets
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order
<< Back to first page ComPact eng
Standard modules6
DescriptionPalletizer 128L with sheet laying unit, 3empty pallet magazines and separateoutfeed. 1. Infeed products 2. Outfeedloaded pallets 3.1 Infeed empty pallets,EUR pallets. 3.2 Infeed empty pallets1200x1000 3.3 Infeed empty pallets”quarter pallets” placed on EUR pallets4. Sheet laying unit
For download of CAD symbols, visitwww.intersystem.seIntersystem reserves the right tomake changes in design, technology,specifications and data.
Tel: +46 (0)431 44 91 [email protected]
Specification
Technical data
Example order