company profile infotrax engineering sdn...

Infotrax Engineering Company Registration No: 723031-W _________________________________________________________________________________________________________________________________________________________________

No. 1-3-3A, Blok 1, City Garden Commercial Centre Taman Nirwana, 68000 Ampang, Selangor Darul Ehsan

Tel: +603 9212 3888 Fax: +603 9212 3884 Email: [email protected] Website: www.infotraxeng.com

Company Profile

INFOTRAX ENGINEERING SDN BHD

1. Dimensional Control Survey

2. 3-D Laser Scan

3. Engineering Services

4. Vibration Monitoring

5. Process Control & Monitoring System

mailto:[email protected]




Company Background

Info-Trax Sdn Bhd (ITSB) is a licensed company with PETRONAS was incorporated in 1991. ITSB has been awarded an umbrella contract (Master Price and Service Agreement) by PETRONAS Carigali in the area of Laser Scanning and Dimensional Control Survey on 2013. Working closely with its own Associate Company Infotrax Engineering (M) Sdn Bhd who is leader and specialist in Accuracy Control, Electronic Survey and Measurement we believe this revolutionary technique, would be able to help and complement oil & gas producer to tremendously reduce the time and money due to unplanned and unscheduled shutdown. As a company with the focus in the Dimensional Control& Engineering Services, ITSB is desired to render it services to Malaysian Oil & Gas company in the area of Dimensional Control Survey & Engineering Services. The services that we could provide starting from Laser Point & Laser Scan Survey until the production of the fabrication drawing and finally the as built drawing.

The provision of 3D CAD models of millimetric accuracy of existing and replacement equipment, utilizing electronic laser data capture methods became the enabler for innovation and subsequent major cost & program savings on both new build and brown-field modification projects.

With this major step forward in technology, ITSB has established a leading position in Malaysia.

Complete Dimensional Survey Service

ITSB and its partner have more than 100 surveyors who are highly experienced in all aspects of new build projects and modifications to fixed platforms and FPSOs. All the survey personnel are equipped with the latest electronic survey instruments and software enabling them to deliver quality results on every project. They are fully conversant in both 2D and 3D drafting to complement their reports and deliverables. Major operators and engineering and construction companies contract us worldwide on both minor and major projects.





Engineering Services

Our engineering divisions fully complement each other when clients specify a complete engineering package as the final deliverable. Our engineers and designers are experienced in brown-field modification projects and are conversant with most mainstream design software systems. We also provide in-house training such as modeling, spec creation, piping & support design, shop drawing production which utilizing the most recent engineering software used (e.g PDMS, Cyclone, AutoCAD, SP3D) to ensure good quality of our people when we place them in client organization. We provide the support to our staff whenever required in performing the duties at the client site.

In house training Detail Design Work

Engineering Department


Infotrax EngineeringCompany Registration No: 723031-W_________________________________________________________________________________________________________________________________________________________________

No. 1-3-3A, Blok 1, City Garden Commercial CentreTaman Nirwana, 68000 Ampang, Selangor Darul Ehsan

Tel: +603 9212 3888 Fax: +603 9212 3884Email: [email protected] Website: www.infotraxeng.com

Organizational Chart




What is Laser Scanning? Objective: To provide a fast, accurate, cost effective solution to obtaining 3D ‘as-built models of your facilities, in the format of your choice. (AutoCAD, Micro Station, PDS, PDMS)

1. Site visit to capture real data in the onshore or offshore environment. 2. 360 degree scans of 5000 points per second enable extremely rapid data collection.

3. Construction of model elements in 3D

environment. 4. Fully rendered model for design, clash checking, visualization and communication.





Dimensional Control Survey – How does it work? Objective: First Time Fit, Clash Free Installation, Zero On-Site welding.

1. Customer supplied design sketch or similar drawings 2. Site Survey to establish as-built coordinate of tie-ins and proposed routing corridor (Rapid capture of pertinent data to + 1mm) 3. Actual as-built surveyed data automatically imported into CAD model space. 4. Actual Tie-in point positions and deviations Computed automatically from Infotrax ScanMaster Software. 5. Details of tie-in-flange deviation geometry are automatically transferred to the fabrication isometric.





6. Customer’s design sketch route centre-line incorporated into 3D model and adjusted to fit between tie-in points. 7. 3D pipe components and equipment items added to the adjusted design centre-line. 9. As-built corridor model exported to visualization and clash detection software 10. Design model of the new pipe-work imported to the as-built corridor model and clash check performed. 11. Clashes detected reported and resolved





12. Construction review to ensure practicality / ease of installing spools and equipment.

13. Semi-automatic Fabrication Isometric Generation. 14. Fabrication conformance verification surveys to international standard tolerances. 15. First Time Fit of New Design. Zero rework. Zero growth. Zero risk.





Examples of Dimensional Control Project

Module support frame installation. As-build of new module support frame overlay with offshore laser and clash report produced.

Piping modifications on fixed platform. All the interconnecting pipework was surveyed and fabricated prior to the installation of the topside modules, these spools were loaded out inside the modules. Once the modules were installed the spools were lifted into position and bolted. Major cost savings for all.

FPSO deck layout model from client 2D design and we survey of existing deck equipment. Inter discipline clash checks done for all existing deck equipment, new piping systems, new pipe rack, new module support frames and modules and new deck equipment. Isometrics produced for all piping systems.





3D As-Built Modeling: Discernable Benefits to End User “The Most Accurate Brownfield Asset Capture”

The deliverable provides 3D modelling services from cloud data to clients who require highly accurate documentation of their facilities. Various types of 3D models are offered to client for the as-built solutions as per below types: 1. Primitive 3D model (Primitive) 2. Semi-Intelligent 3D model (Semi-I) 3. Full-Intelligent 3D model (Fully-I). The translation of the as-built data which captured from the cloud data are translate into millimetre-accurate 3D CAD model using software such as Leica Cyclone, SmartPlant 3D (S3D), PDMS, PDS, AutoCAD, Microstation etc. The cloud data that offered from the laser scanning are compatible for current modelling software that available in the market.

Primitive 3D Model Geometry model only with no attributes or tags attached. Drawings cannot be automatically extracted from 3D model.

Semi-Intelligent 3D Model Primitive model with tag numbers attached in accordance with the P&ID. No attributes are attached and drawings cannot be automatically extracted from the 3D model.

General Work Flow for Point Cloud conversion into various type of 3D model.





P&ID mark-up for Piping & Equipment tagging for Semi-I modeling QAQC

Semi-I model output completed with tagging in dedicated hierarchy for Petronas Project





Sample output of 3D Primitive & Semi-I model in PDMS mode





Full-Intelligent 3D Model

The Intelligent model may be created from the Semi-Intelligent model with all attributes, specs and catalogues dissolved in one active model using intelligent 3D software (e.g PDMS, SP3D, CadWorx etc). In certain cases, the intelligent model also can be created directly from the Point Cloud or Survey raw information as an optional method to suit with. Drawings generally can be extracted automatically from this model. Under normal circumstances, the intelligent model is created in the ‘As-Built’ condition. In the explanation further below describes where the model is required to be manipulated or ‘squared-off’. Where the client has requested that the ‘As-Built’ model is squared off in order to get a presentable ‘As-Built’ engineering drawing output; the manipulation of 3D As-built conditions to square pipework, steelwork, etc need to be carried out in some limitations & guidelines.

Sample output of 3D PDMS fully converted into full intelligent (squared-off mode) with auto drawing extraction from PDMS software

Sample from Petronas Platform





Sample Monochrome Point Cloud output, Fully-I SP3D Model & As-Built Drawing Production of onshore plant in Kerteh, Terengganu for Petronas Project





Sample Colored Point Cloud, SP3D Model, As-Built Isometric production & Colored Truview c/w Geotag Generation of offshore platform in Sabah for Petronas Project





Lean Engineering: Quick & Safe Turnaround Solution “Single Piece flow, concurrent engineering, co-location”

We provide optimal first unit delivered quality engineering, responsiveness to change, waste minimization, safe and just fit-for-purpose in/at the right place, time & quantity Design Engineers must make the right choices, early in the process, to insure client satisfaction and low lifecycle costs. We have a complete set of capable people, processes and tools required to deliver cost effective solutions for the repair order & minor modifications projects as our new bottom up approach especially in topside upstream maintenance area and MOC scope. This allows us to utilize an efficient systems engineering, integrated product teams and recent engineering tools to enable lean engineering processes had a continuous improvement. By using this approach; it was shown that cost and schedule savings are typically significant compared to conventional methods while maintaining safety environment, seamless information flow and quality assurance. Services

2D & 3D Design preparation

Engineering, procurement & fabrication management

Mini work pack (Pre-job & construction)

3D CAD digitizing point cloud (As-Built environment)

Update existing 3d model onto point cloud

2D fabrication detail drawings

Stress Analysis

Benefits

Reduce maintenance spares

Reduce recurring & non-recurring cost against conventional methods

Enables Faster Delivery Times

One stop solution for work packing, engineering, fabrication and construction

Improve cycle time and quality in engineering

Correct first time





Sample from SHELL Miri Project – Repair Order of Closing Spool Replacement





Sample from SHELL Miri Project – Repair Order of Instrument Drain Line Replacement





Sample from VICTORIA PRODUCTION facilities – MOC Scope: Installation of pressurization gas for Coalescer and Produced water collection vessel (3d Design, Clash Checking & Fab Isometric production)





Repair Order Scope

Method of Statement: 1) Corridor EDM survey & Laser Scanning for the affected areas stated in the

Inspection Report. 2) Processing the point cloud database & EDM survey data. 3) Registration of point cloud to patch all the survey points & scan targets. 4) Generate one consolidated point cloud (whichever using corridor Laser Scanning). 5) Generate As-Built model (whichever using corridor EDM survey). 6) Setting the datum /reference point for global or local system. 7) Generate Semi-I 3D design modelling from the point cloud / corridor survey. 8) Produce 2D ‘Fabrication’ Isometric. 9) Produce 2D ‘Fabrication’ Support Details (if any). 10) Produce Preliminary Bulk MTO for Client’s ordering reference.

1. Laser Scanning & EDM Survey (Site Execution)

Carried out by fully qualified, graduated surveyors who have had full training of surveying all aspects of the mechanical and structural elements in the offshore Oil and Gas industry, adhering to our proven quality procedures and method statements. Our understanding of this major work scope is to supply the necessary trained personnel and equipment to your offshore / onshore installation to complete a 100 % laser scan and EDM survey of all the process, utility systems & structure within the defined areas. As the areas near the header are congested, we will utilise laser scanning techniques in order to capture the as-built data in the shortest time period. The survey team comprises 1 scanning operator & 1 surveyor. A master control network will be established by EDM (Total-Station) survey, based on the as-built platform primary structure for both plan & elevation ordinates. A series of overlapping scans, within & around the required areas to ensure full capture of all equipment, pipe-work & structural items will be carried out & repeated on each deck until all the areas has been scanned. Pre-analysis to ensure complete scan coverage of the required areas, will be carried out on site before team demobilisation. Output from Laser Scanning Activities;

Point cloud (true as-built condition) that can be converted into 3D model in CAD format via point cloud tracing at later stage.

Output from EDM TP & Corridor Survey;

As-Built 3D Model and Tie In Point Details.





FIGURE 1 (A) – SCOPE OF WORK RECEIVED FROM THE INSPECTION RESULT TO CONDUCT FURTHER SURVEY FOR AFFECTED LINES / AREAS.

Associate item survey

by EDM

TP survey by EDM

FIGURE 1 (B) – CORRIDOR & TP SURVEY OUTPUT USING EDM METHOD & CAD MODELLING





2. Point Cloud & Truview Generation (Office Execution)

Following demob from the facility, the scan data is registered in the Point cloud environment. We use LFM software for this work. [LFM Server is the application used to register (orientate individual scans to the master control values) & subsequently, generate the point cloud; this software is provided, under licence by Z+F, the manufacturer of the scanners we own. The database produced by the generation process, becomes the point-cloud deliverable. Once registration & database generation are completed, photo realistic images generated from point cloud can be manipulated and rotated 360 degree as per user requirement. The beauty of this massive capture is we could navigate and expand the original scopes if the client need some further modifications at the other areas nearby.

FIGURE 2 (A) - VIEW OF REGISTERED POINT CLOUD DATABASE IN LFM FOR BOP- A.

Figure 2 (B) - View of registered point cloud database & bubble image in LFM for BODP-B, Malaysia

Water.





Figure 2 (c) - View of Monochrome Truview Navigation

Figure 2 (D) - View of Color Truview Navigation





3. Engineering Drawing Production (Office Execution)

Similar with other inspection works, Inspection Execution team will establish and provide final work pack to Winner for evaluation in terms of manpower detail and work duration required for the field and office works. The work pack input must be contained a list of piping and structural for replacement works (sectional replacement or flange to flange replacement marked in the drawing), original as -built drawing, P&ID, criticality and prioritization of works. Replacement scope of work will be referred based on but not limited to the original as-built drawing (if provided), line sketch in the inspection report, damage (corrosion) mechanism factor related to the piping and other requirements in the work pack. For this scope of work, engineering team will undergo several methodologies summarized as per below:

1) Tie-In Point Verification, Redline model & Clash Check 2) Redline Markup onto old / client’s isometric 3) Fabrication Drawing Production

3.1 Tie-In Point Verification, Redline Model & Clash Check

All site survey data regarding flange Tie-In Point such as bolt rotation, flange rating, flange deviation, as-built coordinates & cutline reference will be loaded into PDMS or CAD software. Point cloud will be dumped onto PDMS or CAD software as well for scope re-verification. Affected piping then will be modelled up (As-Built) & squared to suit TP survey. Once all termination points & new redline model were verified, clash checking will be performed in order to have a new established clash free redline model prior 2D drafting activity. In summary; the methodologies are as per below:

Load TP survey data into modeling software.

Load unified Point Cloud into modeling software.

As-Built modeling via Cyclone.

Redline Model via CAD 3D.

Quick clash analysis

Finalize 3D Redline model for replacement.





Figure 3 (A) – TP Surveyed Output & Redline Modeling for Fabrication

3.2 Redline Mark-Up on Existing Client’s Isometric

Every changes or modification required will be marked-up on the existing isometric supplied from client (if provided) based on squared off redline model generated from activity 2.3.1.

Figure 2.3 (B) – Redline Mark-up on existing isometric for fabrication





3.3 Fabrication Drawing Production

The survey work is based on like for like replacement work, hence, the drawing must represent the same design as per site. Basic deliverables normally to refer as final isometric fabrication drawing. Optionally, support details drawing & penetration details drawing will be produced wherever required in the final construction workpack.

2D Fabrication Isometric Drawing – Drawing represents the section for replacement, will be submitted immediately once site survey completed. The drawing to be included in the fabrication workpack on client end. New MTO will be extracted from the model via piping specification sheet provided. Any obstruction related to the field joint replacement work will be highlighted clearly in the fabrication drawings together with the details (type of obstruction and length to the obstruction point(s) from selected datum / reference points). Then we will produce 2D Isometric from RLM / Redline model output from activity 2.3.1 & 2.3.2 above. All mark-up details will be back drafted in cad version (.dwg format) came together with new bill of materials for issuance.

Figure 3 (C) – Sample of Piping Isometric & MTO Re-produced for Fabrication & Construction

MTO list will be re-checked with Piping Specification spreadsheet supplied from Client. All Engineering QAQC will be implemented with reference to the P&ID’s, 3D Model, Equipment layout, Piping GA’s and existing Point Cloud.





Figure 3 (D) – Sample of Penetration Details & MTO production for Repair Order Scope

Figure 3 (E) – Sample of Pipe Support Details & MTO production for Repair Order





Figure 3 (F) – General Process Workflow of Repair

LASER SCAN, TP SURVEY,

3D MODELING & CLASH

CHECK

TPs CONFIRMATION ON P&ID

(REPLACEMENT SCOPE)

DESTRUCT ISOMETRIC

CONSTRUCT

ISOMETRIC





Figure 3(F) – Sample workflow of Fabrication Drawing Production for Repair Order scope

2D Drafting

MTO checking

QAQC

2D Drafting

MTO checking

Insp Workpack Report

Received

TPs Coord. importing

into 3D Model & As-

Built Piping Modelling

3D Piping Model square

off to datum reference

(Redline Model)

Clash Check

Pipe Support

Details

Fabrication

Isometric

2D Drawing

Production

Site Survey Execution

(Laser Scan & TP Survey)

QAQC





COMPANY EXPERIENCE

MOST RECENT PROJECT

Project Name/ Installation Client Name Scope Start Date &

End Date

LASER SCANNING & 3D

MODELLING

(PETRONAS PENAPISAN

MELAKA)

GROUP

TECHNICAL

SOLUTION (GTS)

Laser scanning, TP

Survey, 3D Modelling

Sept 2016 –

Present

8 REPAIR ORDER SOW

FOR BARAM A & B

(BAKP-B, BAK-B &

BADP-A)

DAYANG

ENTERPRISE SDN

BHD / PCSB

Laser scanning, TP

Survey, 3D Modelling ,

Produce Fabrication

Drawing & Bulk MTO

Production

May 2016 – June

2016

KIKEH FLEET SUPPORT

2016 – LASER SCAN &

TP’S SURVEY

SBM MALAYSIA

Laser Scanning, TP

Survey, Clash Checking

& Spool Audit Survey

May 2016 -

Current

27 REPAIR ORDER SOW

FOR BARAM A & B

(BADP-B, BAP-B, BAKP-

B, BAK-B, & BAP-A)

DAYANG

ENTERPRISE SDN

BHD / PCSB

Laser scanning, TP

Survey, 3D Modelling ,

Produce Fabrication

Drawing & Bulk MTO

Production

March – April

2016

PROVISION OF DETAIL

DESIGN FOR EPCC OF

F12 FACILITIES

RANHILL

WORLEYPARSONS

SDN BHD

Laser Scanning, Creating

Panoramic Photos &

Truview Layout

March 2016 –

April 2016

3D LASER SCAN

SURVEY AT KNDP-A –

HP COMPRESSOR

UMW / TALISMAN

ENERGY

Laser Scanning & 3D

Modelling March 2016

PROVISION OF

MANPOWER,

EQUIPMENT AND

TOOLS FOR 3D LASER

SCANNING & SURVEY

1) SMG-A

2) EWDP-A

3) TBG-A

4) SFDP-A

SAPURA KENCANA

PINEWELL

Laser scanning and 3D

semi-intelligent modeling

Feb 2016 – May

2016

PLATFORMS AS-

BUILTING AND

INTELLIGENCE DATA

POPULTION INTO P-

EDMS FOR MLNG2

1) B11DR-A

2) M3DR-A

3) M3PQ-A

INTERGRAPH /

PETRONAS MPM

Color laser scanning, 3D

intelligent modeling

(S3D), Updating P&ID,

Drawing Production, and

Data management.

Nov 2015 -

Current






End Date

LASER SCANNING & 3D

SEMI-INTELLIGENT

MODELLING FOR

TAPIS-D

WOOD GROUP

MUSTANG /

EXXON


semi-intelligent modeling Dec 2015

PROVISION OF

MANPOWER EQUIPMENT ,

TOOLS AND CONSUMABLES TO

CARRY OUT ON SITE

LASER SURVEY FOR TAPI-A

SAPURA KENCANA

PINEWELL

Laser Scanning, Clash

Check design against

point cloud, re-issue IFC.

Dec 2015

D35DP-B WELL TIE IN (9

WELLS)

SAPURA KENCANA

PINEWELL / PCSB



point cloud, re-issue IFC,

& Spool Audit

Sep 2015 – Jan

2016

MASTER PRICE and

SERVICE AGREEMENT

(MPSA) FOR SKO

Platforms

Completed Platforms to-

date:

PETRONAS

CARIGALI SDN

BERHAD


semi-intelligent modeling

(4+1 years contract)

2014 - Current

1) TBG-A

2) TBG-B

3) E11R-B

4) F9JT-A

5) WLDP-A

6) WLDP-B

7) WLP-A

8) BKP-A

9) BYG-A 10) BYR-A

11) BYP-A

12) BYDP-A

13) MCOT

14) BAP-A

15) BAP-AA

16) BADP-A

17) BAP-B

18) BADP-C

19) BAJT-D

20) BAJT-F 21) BAK-B

22) API-1

23) BNDP-I

24) BNV-A

25) BADP-E

26) BADP-G

27) BAJT-H

28) BA-18

29) TKDP-A

30) TKDP-B

31) TKK-A

32) TKQ-A

33) TKJT-C 34) TKJT-D

35) TKJT-E

36) TKJT-F

37) TKJT-G

38) TKJT-H

39) TK-3

40) BNJT-D

41) BNJT-H

42) WLK-A

43) D35DP-B

44) D35JT-C 45) TEDP-A

46) TEDP-B

47) TEJT-C

PCSB – SKO,SBO,PMO

1) BCOT

2) KUJT-A

3) EWDP-A

4) EWDP-B

INTERGRAPH /

PETRONAS GTS/

PETRONAS PMU

Laser scanning, 3D

intelligent modeling

(S3D), Update P&ID and

Data management.

December 2013 –

December 2015






End Date

5) EWVA-A

6) SMDP-A

7) SMJT-C

LASER SCAN & PDMS

INTELLIGENT FOR SKO

PLATFORM (PHASE 1 –

12 PLATFORMS)

PETRONAS/

RANHILL WORLEY

Laser scanning, 3D full

intelligent modeling,

clash checking and re-

engineering drawings

July 2013 – May

2014 1) BODP-A 2) BODP-B

3) BODP-C

4) BOP-A

5) BNP-A

6) BNP-B

7) BN14 8) TKP-A

9) TKP-B

10) WLDP-C

11) TEP-A 12) TEP-B

BARONIA – BNDP-B

WELL TIE IN PACKAGE

(3 WELLS)

PETRONAS

CARIGALI SDN

BERHAD




& Spool Audit

Feb – Jul 2015

TEJT-T WELL TIE-IN

PACKAGE (2 WELLS)

PETRONAS

CARIGALI SDN

BERHAD



point cloud, re-issue IFC.

Feb - Apr 2015

BARONIA – BNDP-A

WELL TIE IN PACKAGE

(2 WELLS)

PETRONAS

CARIGALI SDN

BERHAD




& Spool Audit

Nov 14 – Apr

2015

SUJT-C WELL TIE-IN

PACKAGE (2 WELLS)

PETRONAS

CARIGALI SDN

BERHAD




& Spool Audit

Aug - Dec 2014

TBG-A & TBG-B WELL

TIE IN PACKAGE (4

WELLS)

PETRONAS

CARIGALI SDN

BERHAD




& Spool Audit

Jun - Sept 2014

MMC-SKO PRICE

AGREEMENT 1) TEP-A & TEP-B

2) CLUSTER 12

(7 PLATFORMS)

3) D18MP-A & BYP-A

MMC

Laser scanning, 3D semi-

intelligent modeling,

Clash checking and re-

engineering drawings.

(2+1 years contract)

January – March

2014

FPSO PERISAI KAMELIA EMAS


semi-intelligent

modeling, Clash

checking and re-


Apr-14






End Date

SEPAT FSO & MOPU MMC/PCSB Laser scanning and 3D

semi-intelligent modeling Jun-14

E11RC TECHNIP /

PCSB


semi-intelligent

modeling, Clash

checking and re-


May - June 2014

BEKOK-C TECHNIP / PCSB


semi-intelligent

modeling, Clash

checking .

October –

November 2014

JN23 TECHNIP / SHELL


modeling, Clash

checking and re-


July 2015

Note:

1. We are the former contract holder for Master Price and Service Agreement (4+1

year’s contract) for PETRONAS CARIGALI SDN BHD.





Other Project in Last 5 Years


End Date

RBDP-B VIETNAM TECHNIP /

PCSB

Laser Scanning , Clash Check

PDMS + LMI

Apr-11

BEKOK-C DNV/

TECHNIP

Piping As-built survey & P&IDs

notification

June – September

2011

TKDP-A TECHNIP /

PCSB Laser Scanning & 3D modeling

June – September

2011

GUNTONG A, B & C EMEPMI/

TECHNIP


intelligent modeling, Clash

checking and re-engineering

drawings.

January – May

2013

MDA & MDPP TECHNIP/

HESS

Laser Scanning , EDM survey ,

3D PDMS modeling

March – May

2012

BOP-A / BKP-A OPE /PCSB Clash check Point Cloud VS new

design for modification project

January – March

2011

ERB WEST (EWDP-

A,EWDP-B,EWG-A &

EWP-A)

MMC /PCSB

Clash check Point Cloud VS new

design for modification project –

PDMS + LMI + LFM

January – March

2011

TCOT: PWSU &

REMEDIAL WORKS

KHL /

EMEPMI

Laser Scanning, Clash Check

design against point cloud, re-

issue IFC.

January – March

2011

FPSO

RUBICON,PHILIPINES

RUBICON

OFFSHORE

Laser Scanning & issue point

cloud for Finite Element Analysis.

March – May

2011

SBO ASSET LASER

SCANNING:

PCSB SBO

Laser Scanning and updating

P&ID for 21 platforms for

PCSB/SBO

April – December

2011

1) EWDP-A

2) EWDP-B

3) EWP-A

4) EWQ-A

5) EWG-A

6) EWV-A

7) KIND-P

8) SMQ-A 9) SMJT-G

10) SMR-A

11) SMG-A

12) SMP-A

13) SMP-B

14) SMP-C

15) SMDP-A

16) SMDP-B

17) SMK-A

18) SMJT-C 19) SMJT-D

20) SMJT-F 21) SMJT-E

SMDP-B MMC/PCSB Laser Scanning & EDM survey

for Samarang IO project

July – October

2011






End Date

FPSO KIKEH SBM

Malaysia

Laser Scanning, Clash Check

design against point cloud, re-

issue IFC.

Jun-12

WEST LUTONG ,

BODP-C OPE/ PCSB

3D Laser Scanning, EDM survey

& Clash Checking

July – December

2012

MCOT & BAP-A OPE / PCSB 3D Laser Scanning, EDM survey

& Clash Checking

July – December

2012

BOKOR PHASE 3

AKER

SOLUTION/

PCSB

Laser Scanning & EDM survey,

Clash Check & issue clash free

model.

June – September

2011

BEKOK A RNZ/PCSB

Laser Scanning, 3D modeling

Clash Check & issue clash free

model.

February – June

2012

BEKOK C

RANHILL

WORLEY/

PCSB

Laser Scanning & 3D modeling February – June

2012

BEKOK A & TIONG A RNZ/PCSB Laser Scanning , EDM survey ,

3D PDMS modeling

February – June

2012

YETAGUN A , B & C

YETAGUN

MYAMMAR Laser Scanning , EDM survey ,

3D PDMS full intelligent

modeling

March -

December 2012 TNS/ PCVL

CKP/CKR CARIGALI

HESS

Laser scanning , 3D modeling ,



June – December

2012

BNDP-I RNZ/

PETROFAC




Jul-12

ANPG-A

RANHIL

WORLEY/

PCSB




Oct-12

ANPG-A MMC/ PCSB




Oct-12

19 PLATFORMS SKO

PIPELINES REJUV

PROJECT: OPE/ PCSB-

SKO

Laser scanning whole platforms

(19 platforms)

October –

December 2012 1) TKDP-A

2) TKJT-E

11) WLDP-C

12) BN-14






End Date 3) TKJT-C

4) TKP-B

5) TKJT-F

6) TKJT-D

7) TKJT-G

8) TKJT-3

9) TKP-A 10) SIMP-A

13) BNP-A

14) BNDP-B

15) BNP-B

16) BNG-B

17) E11R-A

18) BODP-A

19) BODP-B

TCOT AND OSC PETRONAS

PMO

Laser scanning, 3D full intelligent

modeling, Clash checking and re-


May 2013 – May

2014

LEWEK EMAS FPSO

EMAS/

PTSC

VIETNAM

Laser scanning, 3D modeling,


engineering drawings, Assist

HUC.

Jul-14

GEMUSUP KAKAP PETRA/

SHELL

Laser scanning, 3D modeling,


engineering drawings, Assist

HUC.

August 2013 –

May 2014

BADP-B PCSB/

LEIGHTON


intelligent modeling, Clash

checking and re-engineering

drawings

Oct-13

SUDP-A DELEUM /

CETCO

Laser Scanning, TP Survey, £D

Design Model, Clash Report &

Analysis

Apr-14

CKP AND CKR

RNZ /

CARIGALI

HESS

Laser Scanning and Updating

PDMS Model, Spool Audit and

Clash Analysis

Feb-14

D12 & LAILA THHE/

SHELL

Structural Survey and 3D As-

Built Model July-14

BCBF for CKP AND CKR

EPIC /

CARIGALI

HESS

Laser Scanning and Updating

PDMS Model, Spool Audit and

Clash Analysis, Engineering

Rectification by Reproducing

AFC/IFC

August-14





Company’s Experiences (BRUNEI)

Brunei operations start in March 2010 with over 200 projects already undertaken. Below are the some list awarded Project to Infotrax Engineering (Brunei) in the recent year.

PROJECT

NAME

INSTALLATION CLIENT WORKSCOPE START/END

DATE

CPRP11 REJUVENATION

PROJECT

CPRP11 AKER SOLUTIONS

3D Laser scanning.

Deliverable of 3D full Primitive modeling.

Feb 2016

IRON DUKE WTI POST DRILL

IDDJ01 DAMIT WORLEY

ENGINEERING

WELL TIE IN, EDM Survey , Laser Scanning ,3D modeling

,Clash check , re-


Jan 2016

CPDP10

INSTRUMENT

UPGRADE PROJECT

CPDP10 PETROKON EDM Survey , Laser Scanning ,3D modeling

,Clash check , re-


Jan 2016

AMCX09 REJUVENATION

PROJECTS

5 PLATFORMS

AMDP09

AMCP09

AMCA09

AMAP09

AMLQ09

DAMIT WORLEY

ENGINEERING

3D Laser scanning.

Deliverable of 3D full

Primitive modeling.

Nov 2015 - Current

CWDP01 – CPRA

WELL TIE IN

CWDP01 SAHID WELL TIE IN, EDM

Survey , Laser Scanning ,3D modeling

,Clash check , re-


Nov 2015

BLNG COGEN II PROJECT

BRUNEI LIQUIFIED

NATURAL GAS (BLNG)

FOSTER WHEELER

3D Laser scanning.

Deliverable of 3D

full Primitive modeling.

2014





ZERO RED PROJECT

5 PLATFORMS FOR EAST

INSTALLATION.

TECHNIP 3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2014

ZERO RED PROJECT

7 PLATFORMS FOR EAST

INSTALLATION.

SAHID SDN.BHD

3D Laser scanning.

Deliverable of 3D

full Primitive

modeling.

2014

CPCX-12 TEST FACILITY

UPGRADE

PROJECT

CPCX-12 PETROKON UTAMA

SDN.BHD

3D Laser scanning

Provide Redline

markup

2014

WELL TIE-IN PROJECT (WTI)

CPDP36

CPDP33

BLWJ01

BUDP01

AMDP09

AMDP17 AMDP25

DAWJ01

FADP01

FADP03

DAMIT WORLEY

CPRA

Theoretical trial

fit/Final fit

Provide redline

mark-up for spool

fabrication.

Spool survey

2014-2015

CPCX-10 TEST FACILITY

UPGRADE

PROJECT

CPCX-10 PETROKON UTAMA

SDN.BHD

3D Laser scanning

Provide Redline

markup

2014

AMAP-09 FRESH

WATER MAKER UPGRADE.

AMAP-09 BRUNEI SHELL

PETROLEUM 3D Laser scanning

Provide Redline

markup for spool

fabrication

Spool survey

2015

CPRP-07 SHUT DOWN I SCOPE

CPRP-07 AKER SOLUTION

3D Laser scanning

Provide Redline

markup for spool

fabrication

Spool survey

2015

AMCX-06 REJUVENATION

PROJECT

AMCX-06 DAMIT WORLEY

3D Laser scanning.

Deliverable of 3D

full Primitive modeling.

2015





Note:

1. We have current long-term project for SHAHID for Well Tie-In EDM Survey

4 INTELLIGENT PIGGING PID

PROJECTS

1. AMWJ31

2. AMWJ80

3. AMDP-03

4. AMPP-17

DAMIT

WORLEY EDM Survey , Laser

Scanning ,3D modeling &Clash check.

2013

AMPA 09 GAS

WSF PROJECT 2011

AMPA 09 DAMIT


Scanning ,3D modeling

&Clash check.

2011

AMPA 09 GAS WSF PROJECT

2010

AMPA 09 DAMIT


Scanning ,3D modeling

&Clash check.

2010

CWDP01

INTERIM GAS LIFT HEADER

EXTENSION

CWDP01 DAMIT

WORLEY Assist HUC for

installation. 2011

BNLG- GLASS LEVEL

REPLACEMENT PROJECT

DAMIT WORLEY

EDM Survey , Laser Scanning ,3D modeling

&Clash check.

2011

REPAIR ORDER

WORKS

FAPP-03 SKS WOODS EDM Survey , Laser

Scanning ,3D

modeling, update drawings.

2013

WATERFLOOD

PROJECT 1. CPDP-31

2. CPDP-33

3. CPPP-01

4. CPPP-04

DAMIT

WORLEY

EDM survey ,Laser

Scanning , 3D

modeling Intelligent

2011

SCOT PHASE 1C PUMP

AMRP01 SHAHID EDM Survey , Laser Scanning ,3D modeling

,Clash check , re-


2010

34 WELL TIE IN'S

34 Wells SHAHID EDM Survey , Laser Scanning & assit HUC

contractor

2011-2015





Company’s Experiences (Overseas) Client Details Project Scope

Name: Aker

Contact: K. Johnston

Tel No. 01224 599000

Esso

FPU Balder

1997 – 1999

This vessel had to be completely refurbished.

We were contracted to prove all Aker design for

clash verification and space management. Provided designers to assist with project.

Name: APG

Contact: D. Workman

Tel No. 01224 599000

Texaco – Galley

1996 – 1996

This vessel had to be completely refurbished

and 4 new process modules and equipment

installed. We were contracted to prove engineering studies and produce all pipework

isometrics and supports.

Name: BP Azerbaijan

Contact: Sam McAdam

Azeri West

Production Deck 2004-2006

Build Control and Hook up of Azeri West

platform at SPS yard in Baku Azerbaijan.Team of 6 surveyors.

Name: Harland & Wolff

Contact: Allan Hayley Tel No.

New Build

2 Drill Ships 1998 – 1999

We were contracted to supply dimensional

control services to assist Harland & Wolff in the build of 2 new vessels, i.e. module-ship section

interfaces, super structure to hull and outfitting

of equipment.

Name: Single Buoy Moorings FPSO Falcon 2005

Major upgrade to FPSO Falcon. Responsible for survey of all new pipe routes

and tie-ins and to position new skid packages.

Fabrication check of all new pipespools.

Name: Husky Energy Contact: Kevin Johnson

FPSO White Rose 2002-2005

Control and verification of module support stools and as-build of deck in Korea plus build

control of modules installation in

Newfoundland Canada

Name: Wood Group Engineering

Ian MacKenzie

BP Clair Project

2003 – 2004

Build control of integrated deck to eliminate

offshore hook-up welding.

280 spools installed without any offshore

welding/testing

Name: Single Buoy Moorings FPSO Brasil

conversion

2002

Conversion of tanker to FPSO.

Survey of complete deck layout,pump rooms

and Cargo tanks.Preparation of piping isometrics/support details

Name: Single Buoy Moorings

FPSO Kuito

upgrade

Angola 2002

Major brownfield modifications to install seven

new modules.Installation corridors and hook-up

pipework controlled.

Name: Brown and Root

Contact: Jim McAllister

Tel No. 01224 777000

Alba Upgrade

Phase I & II

1996 – 1997

Major modifications to existing facilities for

product enhancement All new piping design

proven to eliminate all offshore welding.(over 600 spools)

Name: AIOC (BP Azerbaijan) BP Shah Deniz Provide dimensional control services to





Client Details Project Scope

Contact: Jim McCallum

Project

2004-2007

complete build of Integrated deck for Shah

Deniz field in Caspian

Name: Bluewater Contact:

Tel No.

FPSO Uisge Gorm upgrade

South Africa

Production of structural/piping fabrication drawings.

Dimensional control support to site, Cape

Town, S.A.

Name: Bluewater FPSO Bleo Holm

upgrade

1999 – 2001

Major upgrade to FPSO.

As-build of existing brownfield and clash check

of new design.

Name: AIOC Contact: Derek Patience

BP Azeri Central Project, Baku

2003 – 2007

Fabrication control of new build jacket and integrated deck

to ensure first time fit.Survey of loading barge

to confirm clearances.

Name: Amec Group Contact: T.Telford

FPSO Bonga Nigeria

2002-2005

Build control at Amec yard Wallsend and Hook-up

support onshore/offshore Nigeria

Name: PMEX Contact: I. McGhee

Tel No.

EPC-22 Mexican Gulf

2001-2003

Full Dimensional control of Hook-up 500+ hook-up spools installed with no offshore

welding.

100 % success rate

Name: Marathon Oil Contact:

Tel No.

Alba Phase 2 Equitorial Guinea

2002-2003

Fabrication control and installation of new topside, bridge linked to existing Alba platform

Name: Aker Kvaerner

Contact: Brian Laing Tel No.

Britannia M.P.

Compressor 2003-2004

Full 3D corridor model and clash check of all

new design

Name: AMEC Services

Contact: Tom McQueen Tel No.

Shearwater Hook-

up 2001-2003

Full control of hook-up.

Jackets/topsides/all interfaces resulting in non-weld hook-up

Name: BP Exploration

Contact: Alan Stillwell

Tel No.

ETAP Project Elimination of all offshore hook-up welding by

strict build control. 485 hook-up spools installed

with no offshore welding : 100% success rate

Name: BP America

Contact: Joan Costello

Tel No.

Mad Dog Project

Gulf of Mexico

2002-2004

Elimination of all offshore hook-up welding by

strict build control.380 hook-up spools pre-

fabricated and installed

With no offshore weldind : 100% success rate

Name : KBR Ltd

Contact : Bill Dunnitt

FPSO Carratinga

and

FPSO Barracuda 2005-2006

Provision of Construction Manager and

Commissioning

Manager.Provision of line walking team to establish pre hydrotest completions.

Survey team supplied for hook-up pipework

verification.

Amec Group

Buzzaerd Field Hook-Up

2005-2007

Support project with DC services to install all hook-up and carryover pipework and structural

elements

Aker Kvaerner Offshore Partners Contact Ian Reid

Dumbarton Project on FPSO GP3

2005

Laser scan of compete process deck and Upper deck.

To allow feed study for installation of 7 new

process modules and associated tie-ins.

Shell UK Brent Bravo Utility Laser Scan of 50 mt length of Utility shaft leg





Client Details Project Scope

Contact Ashley Burt shaft upgrade :

2006

to allow clash check of new platforms and

pipework

Shell UK Contact Ashley Burt

Brent Delta Utility shaft upgrade :

2006

Laser Scan of 50 mt length of Utility shaft leg to allow clash check of new platforms and

pipework

KCA Deutag Drilling Ltd Contact Peter Brackenbrough

Chirag 1 : Baku Azerbaijan : 2006

Laser scan of Machine deck and Drill Rig levels 1-4 to accommodate major upgrade

KBR Production Services Ltd

Aberdeen

Contact Murdo McLeod

Forties Alpha

PWRI

Project : 2006

Laser scan of various areas to allow design of

new PWRI

upgrade

SBM Inc

Contact David Wilkinson

FPSO Schiehallion

Turret mods : 2005

Laser scan within Turret of Schiehallion to

allow design of new equipment and pipework

Marathon Oil UK Ltd

Contact Dave Brocklesby

Brae Alpha Enoch

Project : 2006

Laser scan of various areas to allow design of

new module skids and pipework

Aker Kvaerner Offshore Partners

Contact Ian Reid

Hewene Brim

Water Inj upgrade

project :

2004

Laser scan of extensive deck area and central

pipe rack to allow new feed and design to be

carried out.

Transocean Drilling

Cotact Peter Meikle

Sedco 714 New

Mud Pump

installation

Laser scan of pump room to allow feasibility

study to be carried out for additional mud pump.

Aker Kvaerner (Canada) Ltd

Contact Huntley Nesbitt

White Rose

Additional mods

Dimensional survey within utility shaft to prove

new design routings of various mods

Petrobras (Brazil) P40 Upgrade Laser Scan and 3D model of complete process

module to allow major brown field upgrade

Husky Energy Ltd

Contact Kevin Johnston

FPSO Sea Rose

Nov/Dec 2006

Laser scan of complete Turret internal and

externally to enable production of full PDS

model

Husky Energy Ltd Contact Kevin Johnston

FPSO Sea Rose Jan 2007

Laser scan of main deck to assist in feasibility study for major upgrade

WGE North Sea Ltd

Contact George Campbell

BP Magnus

Cold Start Project

Laser scans of wellbays modules 1 and 2 to

allow long term flowline review.


COMPANY EXPERIENCES ON THE UAV

Project Name / Installation Client Name Scope Start date &

End Date

UAV Consultation and Maintenance Service - CAMCOPTER S-100 Rotary Wing Unmanned Aerial Vehicle (UAV)

Malaysian Military

UAV Operation & Maintenance

2012 to Current

UAV Training Programme

Malaysian Military

UAV Training 2012 to Current

UAV Maintenance, Repair and Overhaul (MRO) Provider for Schiebel in Malaysia

Malaysian Military

UAV Maintenance

2012 to Current

Integrated Logistic Support Malaysian Military

Support for Operation

2012 to Current

Oil & Gas Inspection Live and “Cold” Flare Tip Inspections by UAV/drone

KOLOS Group (Norway) Hatch Energy Group (UK & Europe)

Visual, LIDAR & Thermal Inspection by UAV/drone

2015 to Current

Oil & Gas Inspection Derrick Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Exhaust Pipe and Frame Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Communication Tower Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Under Deck Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Platform Leg Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Crane Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Emergency Call Out Inspections by UAV/drone



2015 to Current

Oil & Gas Inspection Trailing Tank Inspection by UAV/drone



2015 to Current

Blade Works LTD and IRIS group sign agreement for utilising UAV/drone in the wind turbine sector

Blade Works LTD


2016 to Current




Customer Testimonials

Client : PETRONAS CARIGALI SDN BHD Project : LASER SCANNING AND 3D AS-BUILT ( MASTER PRICE SERVICE AGREEMENT 3 + 1 CONTRACT ) Location : SARAWAK AND SABAH

EVALUATED AS “ B “ GRADE CONTRACTOR FOR 2014 AND

“A” GRADE CONTRACTOR FOR 2015.





Client : AKER SOLUTIONS Project : LONG TERM AGREEMENT FOR ENGINEERING AND HUC Location : BRUNEI WATER

From: <[email protected]>

Date: 5 January 2016 at 18:08:09 GMT+8

To: <[email protected]>

Cc: <[email protected]>

Subject: Aker Solutions Qualification Score

Dear Shamshur, Thank you for your response to our Supplier Qualification Questionnaire. After evaluation of the qualification questionnaire and all necessary documentation, your

questionnaire has earned a score of 78 out of 100. You have now been categorized as a level A supplier in our Supplier Qualification System. Enclosed, the rating sheet with more information about the score. If any major improvements are launched in your organization, feel free to contact us after which we shall increase your score. Best regards, Shailaja Mali Supplier Approval Aker Solutions

Tel: +91 20 6691 8390 | Mob: +91 99231 07393 [email protected] | www.akersolutions.com

Client: Prosafe Production, Singapore Project: DC Survey requirements for Azurite Project FDPSO, May-Jun’08 On Monday afternoon we completed the installation of the last central Piperack section on board the






http://www.akersolutions.com/




Azurite vessel. This was quite an achievement, and used a new innovative approach by Prosafe Module Yard team for FPSO Piperack construction and installation. We planned, constructed and assembled the Piperack section in the module yard at Kencana in exactly the same layout as they would be positioned on the vessel. This also included the welded pipework which was set up butt weld to butt weld with only the necessary weld gap separating the pipes. With the use of an experienced third party Dimensional Control company,’Scopus’ we surveyed the as-built positions in the Module Yard and transferred these to the shipyard support stools. Working with our module installation group for the Azurite project, ‘Masstrans’, we developed a guide and bumper system that would bring the modules into the exact position that we constructed in Kencana. Utilizing ‘Asian Lift Hercules’ vessel we started lifting Piperack sections on Wednesday as per our schedule and completed the lifting safely and on schedule on sunday afternoon. The result of this innovative method was to save approximately 180 butt welds for Piperack hook-up and more importantly costly use of the quayside crane for spool installation. This method will lead to a major schedule saving for Piperack completion and hook-up to existing systems. This was a great example of teamwork starting with the Prosafe team in the module yard, Kencana our fabricators who set up the modules in their fabrication shop in the vessel position, Masstrans who designed and planned the bumper system and installation method, Asian Lift who carried out the Piperack section lifting and installation, Scopus who aligned the module sections and ensured they would fit, Keppel who landed the modules on the deck and took on board our construction philosophy and the Prosafe Vessel Construction team who organized the installation at the vessel side. Innovation and teamwork combined to bring a great result for the Project, well done to all involved.

Client : PETRONAS CARIGALI SDN BHD Project : WELL TIE IN - HUC Location : SUMANDAK

First and foremost I would like to thanks your team for assisting us during Sumandak Tepi

Well tie-in activity. Indeed application of laser scanning proven to be successful in assisting

us for the scope of work, provided we follow step by step the process. It is also beneficial in

identifying clashes and accurate tie –in which in turn eliminate rework and modification at

site. Just for your info for C07 well tie-in we completed it within one day.

Regards

Mohamad Hafiz B Amran (MHA)





“Design it Right,Operate it Right, Maintain It Right”

Client : PETRONAS CARIGALI SDN BHD Project : HUC – HELIDECK LASER SURVEY Location : BARAM – BADP-B PROJECT MGR : A RASHID A AMIN ( PROJ / EORC )

Pictures attached are

Module Yard construction set-up of Piperacks Piperack section being installed by Asian Lift The installed forward Piperack modules The fit-up achieved after installation (the yellow steel is the temporary bumpers set up in

Kencana to provide the close fit-up and no hook-up spool requirement) Regards Richard Richard Glancy Topsides Delivery Manager Azurite Field development Project





Prosafe Production

Client: Carigali - Schlumberger, Malaysia Project: BOKOR Phase II, Development. Jul’08

Gents

See attached photos of the Main Deck Skid Beams fit-up. TLO achieved a very good fit-up thanks to Infotrax Engineering.

It would have been even better if TLO had used flat 'hook' beams but the trouble was due to some weld distortion on the hook beams built in a rush out of scrap. The final result ok though and accepted.

Regards

Tony Clerk – Structural Engineer, Schlumberger

Client: Carigali HESS / EPIC Mushtari Project: Booster Compression Brownfield (BCBF) Modification Location: MTJDA When the master PDMS database declared superseded (which found not reflecting to As-Built), all piping drawings (Design AFC ISO drawing) are required for re-verification compared to the existing condition. Non-As Built PDMS database will expose inaccuracy information in the AFC/IFC drawing production and definitely affect fabrication and installation during HUC.

Benefits:

- Reduce Shutdown (saved 10 days) - Reduce Hot Works





- Reduce Hazard Minimum FFW Regards, Roslan Sallehudin Project Manager Carigali Hess Jayaman Tarmidi Project Manager EPIC Mushtari

Client : DELEUM / PETRONAS CARIGALI /CETCO Project : SUMANDAK BOOSTER PUMP PROJECT Location : SUMANDAK , SABAH

Dear Tengku,

Just to update your team, this Sumandak Booster Pump Project have been discontinued by

PCSB and we have already rig down the system. This pilot project was discontinued due to

after study conducted by PCSB which found that the reservoir aquifer is strong enough to

maintain pressure and production without the booster pump system. Nevertheless, we have

manage to installed and commission the system with success.

We would like to thank you for your team’s support and great work in the design/engineering

phase up to fabrication which help us a lot in our project. We have learn a lot from your

company and look forward on working again with your team in the near future.

Thank you.

Regards,

Mohd Dali Mohd Ismail I Staff Engineer I





Deleum Chemical - HQ

No.2 I Jalan Bangsar Utama 9 I Bangsar Utama I 59000 Kuala Lumpur I Malaysia I

D/L: 603-22957627 I H/P: 012-3945594 I

[email protected] I www.deleum.com I

A member of the DELEUM Group and officially an OPITO certified Company

APPENDIX #1: PETRONAS LICENSE



http://www.deleum.com/

Pada menjalankan kuasa-kuasa yang diberi oleh Seksyen 7, Akta Kemajuan Petroliam, 1974 dan mengikut Peraturan 5, Peraturan-Peraturan Petroliam,1974, yangdiwakilkan kepada saya oleh YAB Perdana Menteri Malaysia, saya dengan ini mengeluarkan lesen dibawah Peraturan 3, Peraturan-Peraturan Petroliam ini bagi tujuandi atas kepada:

Tarikh Dicetak: 21.10.2015INFO-TRAX SDN BHD (229813-M)42-3, JALAN SULAIMAN 1 TAMAN PUTRA SULAIMAN 68000 AMPANGSELANGOR

Butir-butir Lesen adalah seperti berikut:-

Nombor Syarikat : 229813-M

Jenis Syarikat : LESEN

Tempoh Sah Lesen : 07.09.2015 - 06.09.2018

Yuran Lesen : RM 1,500

Bidang pembekalan/perkhidmatan : Seperti di Lampiran 'BIDANG-BIDANG LESEN / PENDAFTARAN'.

Syarat-syarat Khas yang dikenakan ke atas Lesen ini:-

Tertakluk kepada syarat khas seperti di lampiran berkaitan.

Syarat-syarat Am Lesen ini adalah seperti yang tercatit di halaman seterusnya.

LESEN MEMBEKAL PERALATAN/MEMBERI PERKHIDMATAN KEPADASYARIKAT-SYARIKAT CARIGALI DAN PENGELUAR MINYAK/GAS DI MALAYSIA

Peringatan: Pemegang Lesen Hendaklah Memohon Pembaharuan Lesen Tiga (3) Bulan Sebelum Tarikh Tamat Lesen.

Sijil ini dicetak oleh komputer dan tandatangan pihak Petronas tidak diperlukan. Muka Surat 1 / 3

SYARAT-SYARAT AM LESEN PETRONAS

1. Syarikat ini dikehendaki berdaftar, mendapatkan lesen, permit atau kebernaran daripada pihakberkuasa yang berkenaan untuk mengendalikan perkhidmatan atau pembekalan peralatan ataubahan-bahan yang berkaitan dalam operasi atau aktiviti-aktiviti syarikat ini yang diperlukan;

2. Lesen ini tidak boleh dipindahmilik kepada mana-mana syarikat/pihak lain;

3. Lesen ini akan dibatalkan sekiranya syarikat ini didapati berada di dalam proses penyelesaianhutang-hutangnya (liquidation), penggulungan (winding-up) atau pembubaran (dissolution);

4. Syarikat ini hendaklah memaklumkan kepada PETRONAS sebarang perubahan ke atas kedudukansyarikat seperti pemilikan ekuiti, lembaga pengarah dan kakitangan pengurusan dalam masaempat belas (14) hari dari perubahan tersebut berlaku. Kegagalan untuk berbuat demikianboleh mengakibatkan lesen ini dibatalkan;

5. Syarikat ini hendaklah mengambil tindakan segera untuk memenuhi syarat-syarat khas yangdikenakan di dalam lampiran lesen dan memaklumkan kepada PETRONAS atas perkembangantindakan tersebut;

6. Syarikat ini tidak dibenarkan mengambil syarikat lain sebagai prinsipal, agen, sub-kontraktor atausebaliknya untuk memberi apa-apa perkhidmatan atau membekal apa-apa kemudahan, kelengkapanatau peralatan bagi pihaknya tanpa kebenaran bertulis daripada PETRONAS terlebih dahulu;

7. Syarikat hendaklah membenarkan wakil pihak PETRONAS membuat lawatan pemeriksaan/audit keatas premis/syarikat dan menyemak/menyalin dokumen-dokumen serta menemubual kakitangansyarikat dan pihak yang berkaitan;

8. Lesen ini hendaklah ditunjukkan kepada pegawai-pegawai PETRONAS apabila dikehendaki untukdiperiksa;

9. Lesen ini adalah sah untuk memberi perkhidmatan dan membekal peralatan bagi bidang-bidangyang tercatat di lampirannya sahaja;

10. Syarikat ini boleh dikenakan tindakan sekiranya pada pendapat PETRONAS, syarikat melakukansatu atau lebih daripada perkara-perkara seperti berikut;

a. Gagal melaksanakan kerja yang diberikan sehingga selesai.

b. Gagal untuk melaksanakan tanggungjawab kontrak atau mana-mana tanggungjawab lain dibawah undang-undang terhadap rakan kongsi, prinsipal, agen, sub-kontraktor dan sebagainya.

c. Menerima 'garnishee order'.

d. Menghadapi tindakan muflis.

e. Tidak dapat dikesan melalui alamat terakhir.

f. Mengsub-kontrak kerja kepada kontraktor lain tanpa kebenaran bertulis daripada PETRONAS.

g. Menolak mana-mana kontrak atau tender yang diberikan.

h. Memasuki atau menerima kontrak atau tender semasa di dalam penggantungan lesen.

i. Memberi maklumat palsu, tidak tepat atau mengelirukan.

j. Tidak mematuhi peraturan-peraturan dan etika-etika tender meliputi tetapi tidak terhad kepadamenghantar surat layang, memberi rasuah atau melobi;

k. Melakukan kegiatan yang tidak sewajar dengan Lesen ini.

11. Menurut peraturan 9, Peraturan-Peraturan Petroliam 1974, seseorang yang memulakan ataumeneruskan sesuatu urusan atau perkhidmatan yang tersebut dalam Peraturan 3 tanpa lesen atautidak mematuhi apa-apa syarat lesen tersebut adalah melakukan suatu kesalahan dan apabiladisabitkan boleh dikenakan denda tidak lebih daripada RM 50,000.00 (Ringgit Lima Puluh Ribu)atau penjara selama tempoh tidak lebih daripada dua (2) tahun atau kedua-duanya dan mengenaisesuatu kesalahan yang berterusan ia boleh dikenakan denda lanjutan RM 1,000.00 (Ringgit Seribu)tiap-tiap satu (1) hari atau sebahagian daripada satu (1) hari kesalahan itu berterusan selepas haripertama sabitan itu direkodkan;

12. Kelulusan ini bukan satu perjanjian/jaminan bahawa syarikat tuan akan dipanggil untuk menyertaitender atau sebutharga oleh PETRONAS atau anak-anak syarikatnya;

13. Syarikat ini sama ada secara dengan sendirinya, melalui pekerja-pekerjanya, pengarah-pengarahnya,agen-agennya atau kakitangan-kakitangannya:-

a. Tidak dibenarkan menggunakan logo titisan minyak (oil drop) PETRONAS atau perkataan"PETRONAS" atau menggunakan sebarang tanda, logo atau perkataan atau memakai gayacetakan (typeface), gaya huruf (font), rupa atau warna yang menyerupai cap-cap daganganyang dimiliki atau yang digunakan oleh PETRONAS ataupun anak-anak syarikatnya ("cap-capdagangan PETRONAS") dalam sebarang bentuk sekalipun sama ada pada bahan cetakan, lamanweb ataupun papan tangan; dan

b. Tidak dibenarkan melakukan apa-apa perbuatan atau dalam apa-apa cara sama ada secaralangsung atau tidak langsung mengaku bahawa ia adalah rakan kongsi atau mempunyaisebarang kaitan/hubungan dengan PETRONAS dan/atau anak-anak syarikatnya,MELAINKAN DAN KECUALI Syarikat ini dibenarkan menggunakan rujukan [Syarikat] inidilesenkan oleh PETRONAS [No. lesen], di bawah Peraturan 3 Peraturan-peraturan Petroliam1974.

14. Lesen ini boleh dibatalkan, digantung atau disenaraihitamkan pada bila-bila masa jika mana-manasyarat di atas, syarat-syarat am pelesenan dan pendaftaran PETRONAS dan syarat-syarat lain yangterkandung didalam Panduan Am Permohonan Lesen dan Pendaftaran PETRONAS tidak dipatuhi.

Muka Surat 2 / 3

NAMA SYARIKAT : INFO-TRAX SDN BHD (229813-M)

NO LESEN : 229813-M

TEMPOH SAH LESEN : 07.09.2015 - 06.09.2018

S Y A R A T K H A S L E S E NANNUAL AUDITED REPORT Syarikat dikehendaki mengemukakan salinan Laporan Kewangan Tahunan yang telah diaudit bagi tahun berakhir 31 Januari 2016 dan kedudukan "shareholders' funds" hendaklah

positif sebelum 01 November 2016. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagi disenaraikan dalam "List of Licensed / Registered Companies (LLRC)"PETRONAS

ANNUAL AUDITED REPORT Syarikat dikehendaki mengemukakan salinan Laporan Kewangan Tahunan yang telah diaudit bagi tahun berakhir 31 Januari 2017 dan kedudukan "shareholders' funds" hendaklahpositif sebelum 01 November 2017. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagi disenaraikan dalam "List of Licensed / Registered Companies (LLRC)"PETRONAS

PRINCIPAL APPOINTMENT Syarikat dikehendaki mengemukakan salinan surat perlantikan agensi yang eksklusif daripada prinsipal PROGNOST SYSTEM GMBH yang telah diperbaharui dan mengikut formatyang ditetapkan oleh PETRONAS sepertimana yang dinyatakan di dalam Panduan Am sebelum 30 April 2016. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagidisenaraikan dalam "List of Licensed/Registered Companies (LLRC)" PETRONAS bagi bidang yang berkaitan.

COMPANY OTHERS Syarikat dikehendaki mengemukakan salinan Laporan Kewangan Tahunan yang telah diaudit bagi tahun berakhir 31 Januari 2015 dan kedudukan "shareholders' funds" hendaklahpositif sebelum 01 November 2015. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagi disenaraikan dalam "List of Licensed / Registered Companies (LLRC)"PETRONAS

B I D A N G - B I D A N G L E S E N / P E N D A F T A R A NBIDANG-BIDANG LESEN YANG DILULUSKAN

(Approved License Categories)L/R Kod Perkhidmatan / Bekalan

(Service / Supplier Code)Bentuk Operasi(Mode of Operation)

Nama Produk / Rig / Kapal(Bila Mana Berkaitan)

Tarikh Lulus /Masa

Tarikh Tamat

L PI1090500INSTR-MONITORING EQUIP-MACHINERY CONDITION MONITORING SYSTEM

AGENT PROGNOST SYSTEM GMBH 08.10.201512:39:14

06.09.2018

L PO1120106OFFICE/RESIDENTIAL/OPERATIONAL EQUIP & SUPPLIES-LABORATORY-LABORATORY EQUIP-GENERAL LABORATORY EQUIP/APPARATUS (Reclassifiedfrom PO1120100-OFFICE/OPERATIONAL EQUIP-LABORATORY-EQUIP)

DEALER NOT APPLICABLE 07.09.201509:18:22

06.09.2018

L SG3010500GEOMATICS SERVICES-GENERAL SURVEY-3-D STRUCTURAL SURVEY (SE3050000reclass to SG3010500)

SELF-OPERATED NOT APPLICABLE 07.09.201509:18:22

06.09.2018

L SM5120300MECHANICAL ENG MAINT-ACOUSTIC INSULATION WORK


06.09.2018

L SS1020100SPECIAL CATEGORIES MAINT-CBM DATACOLLECTION,MONITORING&ANALYSIS (Reclassified from SS1020200-SPECIALCATEGORIES MAINT-LUBE OIL ANALYSIS)


06.09.2018

R E M A R K V D P / O T H E R SSS1020100 Excluding East Malaysia Operation (VDP)

*** TAMAT ***

Sijil ini dicetak oleh komputer dan tandatangan pihak Petronas tidak diperlukan. Muka Surat 3 / 3




APPENDIX #2: ISO CERTIFICATION


company profile infotrax engineering sdn...

Documents