composites technologies for 2020 : proceedings of the fourth ...compositestechnologiesfor2020...
TRANSCRIPT
COMPOSITES TECHNOLOGIES FOR 2020
s^S^-if^
ACCM-4tyrtwy M04
Proceedings of the Fourth Asian-Australasian Conference
on Composite Materials (ACCM-4)
University of Sydney, Australia
6-9 July 2004
Edited by
L. Ye, Y.-W. Mai and Z. Su
Organised byThe Asian-Australasian Association for Composite Materials (AACM)
The University of Sydney
-I^P* The University of Sydney
WOODHEAD PUBLISHING LIMITED
Cambridge EnglandTECHNiSCHE
INFORM ATIONSBIBLIOTHFK
UNIVEH.-::iVAT3fMBLiOTHEK
Contents
Preface xix
Conference Organisation xxi
ACCM-4 Sponsors xxiv
Part I: Bio/Eco-Composites
All-plant Fiber CompositesZhang, M. Q., Rong, M, Z, Lu, X. 3
Compression Molding and Mechanical Properties of Composite Materials from
Post Consumer Type Fiber Waste
Hatta, S., Kimura, T., Gonno, H., Kadokura, K. 9
Various Lignocellulosics Fibre Reinforced Polyester Composites: The Study on
Mechanical, Physical and Biological PropertiesAbdul Khalil, H. P. S., Issam, A. M. 15
Development ofEco-Cement Containing High Volumes of Waste Glass
Sobolev, K., Iscioglu, G, Ttirker, P., Yeginobali, A., Erttin, T. 21
Screwless Extrusion ofNatural Fibre-Reinforced Thermoplastic CompositesGalea, T., Mills, T., Halliwell, R., Jayaraman, K. 27
Mechanical Properties of "Green" Composites Made from Starch-Based
Biodegradable Resin and Bamboo Powder
Takagi, H., Takura, R., Ochi, S, 33
Part II: Characterisation
Effect ofFibre-Orientation on Mechanical Properties of Polypropylene CompositesHoushyar, S., Shanks, R. A., Hodzic, A. 41
Friction and Wear Properties of Potassium Titanate Whiskers Reinforced PTFE
CompositesFeng, X., Chen, D. H., Jiang, X. H., Sun, S, Lu, .X, Jin, Y. 46
Study on Jute Fiber Reinforced Polypropylene (PP) CompositeMa, S., Zhang, A. D., Ding, X., Wang, Y. M. 52
Mechanical and Thermal Properties of Composites of Epoxy Resin Derived from
Kraft Lignin Filled with Cellulose Particles
Funabashi, M., Hirose, S., Hatakeyama, H. 57
vi Contents
Effects of Microcracks and Surface Roughness on Thermal Oxidation of Carbon-
Fiber Reinforced Polyimide CompositeKung, H.-K., Chen,H.-S. 62
Effects of Fillers on the Tensile Properties of Polyimide Composite Films at Room
and Cryogenic TemperaturesZhang, Y. H„ Fu, S. Y„ Li, M., Li, Y., Li, L. F., Yan, Q. 68
Processing Effects on Electrical Conductivity and Mechanical Properties of
Particulate CompositeMohafezatkar, F., Haddadi-asl, V., Nazokdast, H. 72
Study on the Hydrolysis-resistant Polyethylene Terephthalate (PET) Fibers
Wong, Y. P., Wang, Y. M. 78
Size Effect on the Compressive Strength of T300/924C Carbon Fiber-EpoxyLaminates in Considering Influence of an Anti-buckling DeviceLee, J. W., Kong, C. D., Soutis, C. 83
Environment Effect of Natural Sisal Fibre Reinforced Epoxy CompositesManufactured by Resin Transfer MoldingZhang, X. P., Yuan, Q., Ngatimin, W., Whitbourn, J., Ye, L. 88
Effective Thermomechanical Properties of Interpenetrating-Structured CompositesTilbrook, M., Moon, R., Rutgers, L., Hoffman, M. 94
Mechanical and Thermal Properties of Phenolic Composites Reinforced with
Hybrid of Spun and Continuous Carbon Fabrics
Kong, T. J., Shin, S. J., Jung, K., Cho, Y. J. 100
Specific Properties vs. Microstructures for Syntactic FoamWouterson, E., Boey, F„ Hu, X., Wong, S.-C. 106
Functionally-Graded Structure and Properties in Human Teeth
Low,I.M., Mahmood,U. 112
Experimental Investigation of Porosity in Carbon/Epoxy Composite Laminates
Zhang, B. M., Liu, L., Wu, Z. J., Wang, D. F. 118
Characterisation ofa ReinforcedPPS Thermoplastic Laminate For Forming Simulations
Chen, Z. P., Phung, T., Paton, R., de Bruijn, P. 124
Characterisation of the Thermo-mechanical Behaviour of a Glass Reinforced VinylEster CompositeSt John, N. A., Gardiner, C. P., Dunlop, L. A. 131
Experimental Study on the Flexural Behavior Using Polyethylene Coated Bars
Kim, Y. J. 137
Contents vii
Moisture Absorption by Cyanate Ester Modified Epoxy Resin Matrices: Effect
of Resin Structure
Karad, S., Jones, F. 143
New Epoxy Resins Based On Azomethine Groups For Potential PolymerApplicationsIssam, A. M., Abdul Khalil, H. P. S., Wan Rosli, W. D. 149
Mechanical Properties of Rotational Moulded Polyethylene Composites -
Experiments and Theories
Yan, W., Lin, R. J. T., Bhattacharyya, D. 154
Morphology and Mechanical Properties of HDPE Reinforced with PET Microfibres
Seltzer, R., Fasce, L., Frontini, P., Rodriguez Pita, V. J., Pacheco, E. B. A. V.,
Dias, M. L. 163
Mechanistic Evaluation ofEnvironments on Degradation of E-Glass/Vinylester
CompositesKarbhari, V. M., Chu, W., Wu, L. X. 169
High Value Composites from Recycled Polyolefins and Rubbers
Fainleib, A., Grigoryeva, 0., Tolstov, A., Starostenko, 0. 175
Viscoelastic Behaviour, Thermal Properties and Morphology for New Compositesfrom Recycled HDPE, EPDM, Ground Tyre Rubber (GTR) and Bitumen
Grigoryeva, 0., Tolstov, A., Starostenko, 0., Fainleib, A., Lievana, E.,
Karger-Kocsis, J. 181
Effect of Coupled Long-Term Seawater Exposure and Bi-Axial Creep Loading (2:1)
on Durability of Fiber-Reinforced Polymer-Matrix CompositesChen,X.K, Gokdag, E., Wang, S. S. 187
Part III: Composite Structures
Deformation Analysis of Kinematically Constrained Thermoplastic CompositePlates in Forming TemperatureDaghyani, H. R., Abadi, M. T., Fariborz, S. 195
Stability Analysis of Loaded Columns Made ofPultruded CompositesMahajerin, E. 201
Identification ofElastic Parameters for Cross-ply Laminated Plates and Shells
Hosokawa, K., Matsumoto, K. 207
Parametric Instability Analysis and Experiment of Laminated Composite Shell
Yeh, M.-K., Huang, H.-C. 212
viii Contents
Bending Properties of Braided Composite Tubes
Okano, M., Sugimoto, K, Nakai, A., Hamada, H. 218
Analytical Stress Analysis of Rotating Composite Beams Due to Material
Discontinuities
Tahani, M., Nosier, A., Rezaeepazhand, J., Zebarjad, S. M. 223
Thin-plate Splines for Thick Composite Plate AnalysisFerreira, A. J. M. 229
Part IV: Delamination
Evaluation of Fatigue Delamination Behavior in Hybrid Composite Material usingthe Delamination Shape Parameters
Song, S.-K, Kim, C.-W., Oh, D.-J. 237
The Effect of Stitch Distribution and Stitch Pattern on Mode I Delamination
Toughness of Stitched Laminated CompositesWood, M. D. K., Sun, X. N., Tong, L. Y, Katzos, A., Rispler, A. 243
Dynamic Analysis for Delaminated Composites with Arbitrary Shaped MultipleDelaminations Based on Higher-Order Zig-Zag TheoryCho, M., Oh, J., Kim, J.-S„ Kim, G.-I. 249
Part V: Design and Optimisation
Application of Stochastic Optimization to Reconstruction of Random Microstractures
Pyrz,R., Bochenek,B. 257
Optimal Design ofFilament Wound Structures Based on the Semi-geodesic Path
AlgorithmKim, C.-U., Kang, D.-H., Hong, C.-S., Kim, C.-G. 264
Development of a Material Mixing Method for Topology Optimization ofMultipleMaterial Structures
Han, S. Y, Lee, S. K, Park, J. Y. 270
Structural Design of a 750kW Composite Wind Turbine Blade
Jung, C. K., Park, S. H„ Han, K. S. 276
Axiomatic Design of Composite Track Pin
Park, D. C, Kim, S. S., Lee, S. M., Lee, D. G. 282
Characterization and Design Optimization of FRP Composite Modular System for
Slab-on-Girder Bridges
Cheng, L. J., Karbhari, V. M. 288
Contents ix
Design of Composite-Antenna-Structures with High Electrical and Mechanical
Performances
You, C.S., Hwang, W. 294
Filament Wound Spherical Composite Pressure Vessel Design by an EnergyMethod
KimB.-S., Joe, C.-R. 299
Part VI: Failure Analysis
Numerical Study on Buckling of Z-pinned Composite Laminates
Yan, W. Y., Liu, H.-Y, Mai, Y.-W. 307
A Three Dimensional Approach of Fatigue Crack Propagation for Aluminum
Panels Repaired with Single-Sided Composite Laminates
Hosseini-Toudeshky, H., Sadeghi, G., Daghyani, H. R. 313
Time-temperature-water Absorption Superposition Principle for Flexural Fatigue
Strength of Unidirectional CFRP Laminates
Ichimura, J., Sekine, N„ Nakada, M., Miyano, Y, 319
Buckling of Composite Plates with Cutouts
Rezaeepazhand, J., Durban, A. M. 325
Fatigue Crack Propagation in Graded CompositesTilbrook, M., Rutgers, L., Moon, R., Hoffman, M. 331
Dynamic Response Behavior of Stiffened Delaminated Plates Considering Failure
Bai,R.X., Chen,H.R., Wang, M. 337
Tensile Behaviour of Polymer Coated Optical Fibres
Law, S., Yan, C, Ye, L. 343
Statistical Model for Multiaxial Fatigue Behavior of Unidirectional Laminates
Diao, X. X., Lessard, L. B. 349
Part VII: FEM/Simulation
Simulation of Three-dimensional Flow in Compression Resin Transfer Moldingby the Control Volume/Finite Element Method
Shojaei, A., Boorboor, D., Ghaffarian, S. R. 357
Modeling ofTwo Dimensional Cellular Solids with Two Types of ImperfectionsLi, K., Gao,X.-L. 363
Finite Element Modeling ofFine Structure of Natural Plant Fibers for Statistical
Characterization of Their Tensile StrengthsSuzuki, K., Kimpara, I., Funami, K. 370
X Contents
Multilayered and Selective Higher-Order-Deformable Sandwich Finite Element
Modeling for Numerical Accuracy ImprovementSuzuki, K., Kimpara, I. 376
Adhesion Measures of Elasto-plastic Thin Film via Buckle-driven Delamination
Li, Q. Y, Yu, S. W. 382
Evaluation of Intra-ply Shearing Stiffness for a Plain Weave Fabric PrepregYu, X. B., Ye, L., McGuckin, D. 388
Part VIII; Fracture
Initial Fracture Behaviour of the Weft-Knitted Textile Composites Having Welt-
Knit Architectures
Khondker, 0, A., Fukui, T., Nakai, A., Hamada, H. 397
Mixed-mode Fracture of a CF/PEI Composite Material
Choupani, N., Ye, L., Mai, Y.-W. 403
Effects of Molecular Structure on the Essential Work of Fracture of AmorphousCopolyester at Various Deformation Rates
Chen, H. B., Wu, J. S., Karger-Kocsis, J. 409
How to Eliminate Buckling in the Essential Work of Fracture Measurement with
Very Thin Plastic Films
Chen, H. B., Liu, S. L., Wu, J. S. 416
Fracture Behaviour of Sandwich Laminates Reinforced by Short-Glass Fibres
Khatibi, A. A. 422
Analytical and Numerical Simulations of Plastic Zone at Crack Tip in
Anisotropic Solids
Liu,H.-X., Ye,Z.-M., Liu, H.-Y. 428
Application ofEssential Work of Fracture Methodology to Polymer Fracture
Duan, K., Hu, X. Z, Mai, Y.-W. 433
Three-Dimensional Micromechanics Analysis of Strain Energy Release Rate
Distribution along Delamination Crack Front in FRP
Tanaka, H., Nakai, Y. 439
Influence ofFibre/Matrix Interphase on Crack Bridging Behaviour During Mode I
Fracture in Glass Fibre CompositesFeih, S., S0rensen, B. F. 445
Behavior of Brittle Reinforced Composites Fracture at Elevated TemperaturesMohamed, A. T. 452
Contents xi
Part IX: Impact
Non-woven Fabric Reinforced Cellular Textile Composites with Improved EnergyAbsorption CapacityLam, S. W., Tao, X. AT., Yu, T. X. 461
Energy Absorption Properties of Braided Composite Tubes
Okano, M., Sugimoto, K., Nakai, A., Hamada, H. 466
Characterization of Damage Resistance and Damage Tolerance of CompositeMaterials
Shen, Z, Yang, S. C, Fu, S. Y., Ye, L. 472
Simplified Prediction Method of Impact Response on Composite Laminates
Kim, S. J., Hwang, I. H. All
Indentation Responses and Damage in Kaolin/Cellulose-Fibre EpoxyNanocompositesVaihola, S., Vilaiphand, W., Lopez, A., Low, I. M. 482
Impact Performance of 3D Interlock Textile CompositesByun, J.-H., Urn, M.-K., Hwang, B.S., Song, S.-W. 488
The Ballistic Impact Behavior of Composites Reinforced by Biaxial Weft Knitted
UHMWPE Fabrics
Liang, Z.-Q., Qiu, G.-X., Yi, X.-S. 494
Low Speed Impact Behavior of Aluminum Honeycomb Sandwich Panel
Song.J.-l, Bae,S.-L, Han, M.S., Ham, K.-C. 500
Part X: Industrial Applications
Thermomechanical Analysis of Water Aged Pultruded CompositesAl-Assafi, S. 509
Secondary Bonding in the Construction of Large Marine Composite Structures
Simpson, G. J., Burchill, P. J. 515
Surface Analysis of "Class A" Polymer Composite Substrates for the Automotive
IndustrySchubel, P. J., Harper, L. T., Turner, T. A., Warrior, N. A., Rudd, C. D.,
Kendall, K. N. 521
Injection Molding of Silk Composite from Industrial Fiber Waste
Kimura, T., Suzuki, T., Hatta, S. 527
Test of Full Scale Integrally Stiffened Composite SpoilerRispler, A. 533
xii Contents
Study on the Polypropylene(PP) Fiber/Cement Mortar WorkabilityZhang, K, Zou, L. M, Ni, J. H., Wang, Y. M. 539
Hybrid Composites for Engineering ApplicationAhmad, F., Latif, M. Ridzuan. A., Nisar, H. 545
Development of a Knowledge Warehouse for Intelligent Risk Mapping andAssessment SystemSavci.S., Kayis.B. 551
Opportunities for Nanocomposites in the Oil & Gas IndustryVarley, R., Leong, K. H. 557
Part XI: Interface
Interfacial Properties of Polypropylene Fibre-Matrix CompositesHoushyar, S., Shanks, R. A., Hodzic, A. 565
Surface Grafting of Nano-SiC with Glycidyl Methacrylate in Emulsion and Its
Effect on the Tribological Performance of Epoxy CompositesRong, M. Z, Luo, Y., Zhang, M. Q., Wetzel, B., Friedrich, K. 571
Influence of Matrix Type and Processing Conditions on the Morphology of the
Interface and the Interfacial Adhesion of PE/PE CompositesMasoomi, M., Ghaffarian, S. R., Mohammadi, N. 577
Filler-Elastomer Interactions: Effect of Ozone Treatment on Adhesion
Characteristics of Carbon Black/Rubber CompositesPark, S.-J., Lee, H.-Y., Lee, J.-R., Min, B.-G. 583
Interface End Theory and Fragmentation Test
Ji, X., Dai, Y., Ye, L., Mai, Y.-W. 588
Stress Singularity Analysis of Interface End and Specimen Design for Fiber PulloutTest
Dai, Y., Ji, X., Ye, L, Mai, Y.-W. 594
Part XII: Joint
Evaluation of Strength of SiC/SiC Composite Joint Using New Interface PotentialSerizawa, H., Lewinsohn, C. A., Murakawa, H. 603
Static and Fatigue Analysis ofDouble-Bolted-Joints for Gr/Epoxy after ThermalCyclic LoadingYip, M.-C, Li, R.-Y, Yang, C.-H. 609
Tensile Strength and Fatigue Properties of Z-Pinned Composite Lap JointsChang, P., Mouritz, A. P., Cox, B. N. 615
Contents xiii
The Effect ofThickness on Joint Property of Mechanical Joint with Washer and
TorqueOchi, A., Sugimoto, K, Nakai, A., Hamada, H. 621
Part XIII: Metal Matrix Composites
Micromechanical Modelling of Hybrid Metal Matrix CompositesBabu, P. E. J., Savithri, S., Pillai, U. T. S., Pai, B. C. 629
Formation of Nanostructured Magnesium Composite Reinforced by in-situ TiC
Lu, L., Gupta, M., Toy, K. W. 635
Preparation of Mg-based Hydrogen Storage Nano-composite by Reaction
Ball MillingHu, Y. Q., Yon, C, Zhang, H. F., Ye, L, Hu, Z. Q. 639
A Tin-based Composite Solder Reinforced by Nano-sized Particulates and its
Soldering AbilityZhang, X. P., Shi, Y, W., Ye, L., Mai, Y.-W. 645
Suitability of Metal Composite Suspensions for Injection MouldingAhmad, F. 651
Effect of Intermetallic Volume Fraction on the Mechanical Properties of
Intermetallic/Metal Micro-laminated CompositesKim, H. Y., Hong, S. H., Chung, D. S., Enoki, M. 658
Part XIV: Nanocomposites
Fracture Behaviour ofNano-composite Ceramics
Soh,A.K., Fang,D.-N., Dong, Z.-X. 665
Structure-property Relationships of Polymer Nanocomposites Filled with
Mechanochemically Grafted NanoparticlesRuan, W. H., Zhang, M. Q., Rong, M. Z., Friedrich, K. 671
A Numerical Model for Evaluating Elastic Properties of Carbon Nanotube
Reinforced CompositesHu, N., Fukunaga, H., Kameyama, M. 677
Interfacial Bonding Strength between Carbon Nanotubes and Epoxy Resin Matrix:
Experimental and Computational Studies
Wang, B., Liang, Z. Y., Gou, J. H., Jiang, T. H., Zhang, C, Kramer, L. 683
Epoxy-clay Nanocomposites: Morphology, Moisture Absorption Behavior and
Thermo-mechanical PropertiesHu, C. G, Kim, J.-K., Bari, S. 689
xiv Contents
Study on Fabrication and Properties of Nano-alumina Particles Reinforced
Thermosetting Matrix CompositesCui, Y. H„ Tao, J., Wo, D. Z. 695
Investigating High Strain Rate Responses of Nylon 61 Clay NanocompositesHuang, J. C, Tsai, J.-L. 701
Mechanical Properties of SiC^/Epoxy Nanocomposites at Cryogenic TemperatureHuang, C. J., Fu, S. Y., Zhang, Y. H., Li, L. F. 707
Mechanical Properties and Fracture Performance of Nanoclay-reinforcedPolypropylene modified with Maleic AnhydrideWong, S.-C, Chen, L., Liu, T. X, He, C. B., Lu, X. H. 713
Nanoclay reinforced UV Curable High-barrier CoatingsUhl, F. M., Davuluri, S. P., Wong, S.-C, Webster, D. C. 719
A Comprehensive Study on Intercalation and Exfoliation of Epoxy/ClayNanocompositesLiu, J., Wu,J.S. 725
Hydrogen Bonding, Mechanical and Physical Property, and Surface Morphologyof Waterborne Polyurethane / Clay NanocompositeMa, C.-C. M., Kuan, H.-C, Chuang, W.-P., Su, H.-Y. 731
Thermal Mechanical and Electrical Properties of Multiwall Carbon
Nanotube/Waterborne Polyurethane NanocompositeKuan, H.-C, Ma, C.-C. M. 736
Preparation and Properties of Toughened Novolac Type Phenolic /SiC>2 FlameRetardant NanocompositeMa, C.-C. M., Tai, H, Chiang, C.-L., Kuan, H.-C, Yang, J.-C, Hsu, C.-W. 742
Synthesis, Thermal Properties and Flame Retardance of Novel Phenolic
Resin/Silica NanocompositesChiang, C.-L, Ma, C.-C M., Kuan, H.-C, Chang, H. R., Lu, S.-C. 748
On the Enhancement of the Creep Resistance of Polymer by InorganicNanoparticlesZhang, Z., Yang, J.-L., Friedrich, K. 754
The Stress Transfer in a Single-Walled Carbon Nanotube-Reinforced EpoxyXiao, K. Q., Zhang, L. C. 760
A Study on Mechanical Properties of MWNT/PMMA NanocompositesKim, H.-C, Lee, S.-E., Kim, C.-G., Lee, J.-J. 766
Fabrication and Microstructure of Si3N4-TiCnano CompositesZhao, J., Huang, X. P., Ai, X., Lu, Z. J. 112
Contents xv
Synthesis, Thermal and Wear Properties of Waterborne Polyurethane/PolysilicicAcid NanocompositeSit, H.-Y., Ma, C.-C. M., Kuan, H.-C, Wang, C. P. 778
Preparation and Properties of Epoxy-Bridged PolyorganosiloxanesNanoCompositeLee, T.-M., Ma, C.-C. M., Hsu, C-W., Chiang, C.-L. 784
Moisture Absorption and Hygrothermal Aging of Organo-montmorilloniteReinforced Polyamide 6/Polypropylene NanocompositesChow, W. S., Mohd Ishak, Z. A., Karger-Kocsis, J. 790
Geopolymer Reinforced Polyethylene NanocompositesYuan, X. W., Easteal, A. /., Bhattacharyya, D. 796
Part XV: Processing
Understanding the Thermoforming Issues of Carbon Fibre Reinforced
Polyphenylene Sulphide [PPS] CompositeHou,M., Ye, L. 805
A Numerical Approach to Analyze the Curing Process of Railroad CompositeBrake Shoe
Shojaei,A., Abbasi, F. 811
Possibility of Fabricating Mixed ot/p Sialon Ceramics as Composite Materials
Karunaratne, B. S. B. 817
High Quality and Low Cost Manufacture of Potassium Titanate Whiskers
Lu, X. K, Liu, C, He, M., Yang, Z H., Bao, N. Z, Feng, X. 823
What Darcy Really Meant - the Truth on PermeabilityBechtold, G. 828
Study on Re-pull Force in Pultrusion Processes—I. Experimental Observations
Smith, C, Johnstone, B., Lu, M., Ye, L., Mai, Y.-W. 834
Study on Re-pull Force in Pultrusion Processes—II. Theoretical AnalysisLu, M., Ye, L., Mai, Y.-W., Smith, C, Johnstone, B. 840
Influence of Foaming Temperature and Time on the Hardness of Cellular
Al-Si-Cu-Mg AlloysHasan, MD. A, Kim, A., Lee, H.-J., Cho, S.-S. 846
Forming Characteristics of Aluminium and Glass-Reinforced Thermoplastic Fibre-
Metal Laminates
Mosse, L., Compston, P., Kalyanasundaram, S., Cardew-Hall, M., Cantwell, W. 852
xvi Contents
Compaction of Single Layer Plain Weave Fabric Preform
Chen, Z.-R., Ye, L, Kruckenberg, T. 858
A Study on the Control Strategy to Minimize Voids in Resin Transfer Mold FillingProcess
Park, Y.-H., Lee, D. H., Lee, W. II, Rang, M. K. 864
Fabrication Process and Characterization of Conductive Composite for PEFC BipolarPlates
Heo, S. I., Yun, J. C, Yang, Y. C, Han, K. S. 870
Si02/Sulfonated PEEK Doped with Dodecatunstophosphoric Acid HybridMaterials — Preparation and PropertiesWu, H.-L., Ma, C.-C.M. 876
Thermoplastic Composite Access Cover Manufactured by Co-Consolidation after
Thermoforming Stiffers
Wang, K. J., Yi,X.-S. 882
Dome Forming of Triaxial Non-Crimp Fabrics
Kong, H., Mouritz, A. P., Paton, R. 888
In situ Microfibrillar Reinforced Composites of PET/PC
Liang, G. G., Easteal, A. J. 894
Part XVI: Smart Composites
EPR and Magnetic Susceptibility Studies on the Structure and Polaron Dynamicson V2O5-, M0O3- and CuO- Containing Glasses
Das, B. B., Ambika, R., Ageetha, S., Vimala, P. 903
Increase of High Burst Pressure in CFRP Vessels Reinforced by SMA Fibers
Ben, G., Sakata, K. 908
Monitoring the Strain in the CFRP Laminates and CFRP/Concrete StructuresOgi, K., Takao, Y. 914
Free Vibration of Perforated Aluminum Plates Reinforced with Bonded CompositePatches
Rezaeepazhand, J., Sabouri, H. 920
Design Method for SMA Super Hybrid Composite Materials
Zhang, B. M., Li, S. L., Wu, Z. J., Du, S. Y„ Li, Q. F. 926
Control of Crack Closure in Shape Memory Alloy TiNi Fiber embedded CFRP
Composite Materials
Shimamoto, A., Lee, C.-C. 931
Contents xvii
Influence of Stress Induced Birefringence on FBG Sensors Embedded in CFRP
Laminates
Mizutani, T., Takeda, N., Nishi, T., Tsuji, R., Okabe, Y. 937
Magnetoelectric Properties of Piezoelectric and Magnetostrictive Compositeswith 2-2 and 3-1 ConnectivityHuang, H. T., Zhou, L. M. 943
Shape Memory Effect on Interfacial Strength of SMA-reinforced CompositesPoon, C.-K., Zhou, L. M. 949
Part XVII: Structural Health Monitoring
Modified Acoustic Emission Generated in a Full-Scale Aircraft Wing Subjectedto Simulated Flight LoadingPaget, C.A., Atherton, K., O'Brien, E. 957
In-situ Health Monitoring of Filament Wound Pressure Tanks using EmbeddedFBG Sensors
Rang, D.-H„ Kim, C.-U., Park, S.-W., Hong, C.S., Kim, C-G. 963
An Approach towards Predicting the Evolution of Fire Damage for Marine
CompositesMathys, Z., Gardiner, C. P., Burchill, P. J. 969
A Bayesian Artificial Neural NetworkMethod to Characterise Laminar Defects usingDynamic Measurements
Lam, H. F., Veidt, M., Kitipornchai, S. 975
A Damage Detection Technique of Composite Laminates with Embedded
FBG Sensors
Kim, W.S., Kim, S.-H., Lee, J.-J. 981
Damage Detection in Composites Using Fiber Bragg Grating Sensors as Ultrasonic
Receivers
Okabe, Y., Tamaue, H., Kuwahara, J., Takeda, N. 987
Inverse Analysis for Damage Identification in CFRP Laminates with
Embedded FBG Sensors
Yashiro, S„ Okabe, T., Takeda, N. 993
Parameterised Modelling Technique & Its Application to Artificial Neural Network-
based Structural Health MonitoringHuang, N., Ye, L., Su, Z, 999
Information Fusion in Distributed Sensor Network for Structural DamageDetection
Wang, X. M., Foliente, G., Su, Z., Ye, L. 1005
xviii Contents
Remaining Life of FRP Rehabilitated Bridge Structures
Lee, L. S., Atadero, B., Karbhari, V. M., Sikorsky, C. 1012
Delamination Monitoring of CFRP Laminates Using Electrical Potential Method
Ueda,M., Todoroki.A., Shimamura, Y., Kobayashi, H. 1018
Damage Detection in Glare plate-like structures
Rosalie, S. C, Chiu, W. K. 1025
Quantitative Nondestructive Evaluation in Composites Beam Using Piezoelectrics
Choi, Y.-G., Su, Z, Chen, Z.-R., Ye, L. 1032
Part XVm: Textile Composites
Mechanical Properties of Textile Hybrid CompositeInoda, M., Sugimoto, K., Nakai, A., Hamada, H. 1041
Effects of Fabrication and Processing Techniques of Aramid/Nylon Weft-Knitted
Thermoplastic Composites on Tensile Behaviour
Khondker, O. A., Fukui, T., Nakai, A., Hamada, H. 1047
Modeling and Characterization of 3D Heterogeneous Tissue Scaffolds
Fang, Z, Starly, B., Darling, A., Sun, W. 1052
Continuative Fabrication and Mechanical Properties of Multi-axial Warp Knitted
Thermoplastic Composites Using Micro-braided Yarn
Narita, T., Nakai, A., Hamada, H., Komiya, I., Fukui, E. 1058
Multi-Scale Analysis for Material Characterization of Textile CompositesLiang, J., Wang, K. S., Du, S. Y. 1064
Study on Damage Development of Woven Fabric Composites with Spread TowKurashiki, T., Zako, M., Hayashi, Y., Verpoest, I. 1070
Measurement of Material Damping Properties of Triaxial Woven Fabric
Composites in Low-Pressure Condition
Zako, M., Kurashiki, T., Nakanishi, Y., Matsumoto, K. 1076
CTE Model of 3D Orthogonal Textile Reinforced Aluminum Matrix CompositesLee, S.-K., Byun, J.-H., Hong, S. H. 1081
Permeability of Sisal Textile Reinforced Composites by Resin Transfer MoldingLi, Y., Mai, Y.-W., Ye, L. 1087
Index of Authors 1093