compressors & air tools
TRANSCRIPT
Page 1Page 1
COMPRESSORS& AIR TOOLS
The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds)
KEY
MCFRC100MCFRC1081.1kW/24l@7Bar:65l/minFAD 2.3 CFM
MCFRC102AMCFRC1091.5kW/50l@7Bar:105l/minFAD 3.7 CFM
MCFRC103
1.5kW/100l@7Bar:105l/minFAD 3.7 CFM
MCFRC113
1.8kW/100l@7Bar:165l/minFAD 5.8 CFM
MCFRC241
550W/24l@6Bar:50l/minFAD 1.7 CFM
MCFRC242
750W/50l@6Bar:75l/minFAD 2.6 CFM
MCFRC243
750W/50l@6Bar:150l/minFAD 5.3 CFM
MCFRC244
750W/100l@6Bar:150l/minFAD 5.3 CFM
MCFRC247
3,3kW/150l@8Bar:330l/minFAD 11.7 CFM
MCFRC248
750W/200l@6Bar:150l/minFAD 5.3 CFM
AIR DUSTERS TYRE INFLATOR AIR NAILER AIR BRUSH
AIR STAPLER TOUCH-UP GUN LOW PRESSURESPRAY GUN HIGH PRESSURESPRAY GUN AIR DRILL AIRSCREWDRIVER
DIE GRINDER ANGLE GRINDER PALM SANDER ORBITAL SANDER IMPACT WRENCH 3/8 - 1/2”
MAKEUP INDUSTRY DENTAL LABS. STERILE LABS.
FOOD PREP. SOUND RESTRICTED ESTATES /FACTORIES
In order to maintain the manufacturers stated warranty, please adhere strictly to the following recommended duty cycles: Direct Drive 2HP/3HP – 60% Duty Cycle ( 6 minute run/4 minute rest) If the compressor runs for longer than the stated times, please adjust usage or air tool type accordingly. The ratings are suggested usage for optimal running expectancy of your compressor
DIRECT DRIVE COMPRESSORS
The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds)
SUITABLE
NON USABLE
Page 2
KEY
SUITABLE MCFRC221
1.5kW/100l@7Bar:100l/minFAD 3.5 CFM
MCFRC222
2.2kW/150l@7Bar:200l/minFAD 7.0 CFM
MCFRC227
2.2kW/100l@7Bar:265l/minFAD 8.8 CFM
MCFRC228
2.2kW/150l@7Bar:265l/minFAD 8.8 CFM
MCFRC229
2.2kW/200l@7Bar:265l/minFAD 8.8 CFM
MCFRC210
4.8kW/100l@7Bar:265l/minFAD 9.3 CFM
MCFRC235
8.2kW/100l@11Bar:250l/minFAD 12.3 CFM
NON USABLE
AIR DUSTERS TYRE INFLATOR AIR NAILER AIR BRUSH AIR STAPLER TOUCH-UP GUN LOW PRESSURESPRAY GUN HIGH PRESSURESPRAY GUN AIR DRILL AIR SCREWDRIVER DIE GRINDER ANGLE GRINDER PALM SANDER ORBITAL SANDER IMPACT WRENCH 3/8 - 1/2”
In order to maintain the manufacturers stated warranty, please adhere strictly to the following recommended duty cycles: Belt Drive 2HP/3HP – 80% Duty Cycle (8 minute run/2 minute rest). If the compressor runs for longer than the stated times, please adjust usage or air tool type accordingly. The ratings are suggested usage for optimal running expectancy of your compressor
BELT DRIVE COMPRESSORS
The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds) Page 3
The above air tool recommendations are based on Average CFM = 25% duty cycle of tool ( i.e. continuous running for 15 seconds)
Page 4
WA
RR
AN
TY
YE
AR
COMPRESSORSDI
RECT
DRI
VE C
OMPR
ESSO
RS
24L DIRECT DRIVE COMPRESSORS24L / 1.1kW / 1.5HP Lubricated
Code no: Barcode:MCFRC100 6003751001641
24L / 1.1kW / 1.5HP Lubricated With 5Pc Air Tool kit
• Tank Capacity: 24L• Motor Capacity: 1.1kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa
(7 Bar): 65L/min• Piston Displacement 138L/min• Weight: 21kg• 2.3 CFM @ 7 Bar• 90dB
Dire
ct D
rive
HOME
powe
r cab
le
2.5m
• Tank Capacity: 24L• Motor Capacity: 1.1kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa
(7 Bar): 65L/min• Piston Displacement 138L/min• Weight: 21kg• 2.3 CFM @ 7 Bar• 90dB
Dire
ct D
rive
HOME
powe
r cab
le
1.3mCode no: Barcode:MCFRC108 6003751340207
• Accessories include: 1x Paraffin spray gun, 1x Gravity feed spray, 1x Air duster, 1x Tyre inflator, 1x Coiled airline hose
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
50L DIRECT DRIVE COMPRESSORS50L / 1.5kW / 2.0HP Lubricated
Code no: Barcode:MCFRC102A 6003751010551
50L / 1.5kW / 2.0HP Lubricated With 5Pc Air Tool kit
• Tank Capacity: 50L• Motor Capacity: 1.5kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa
(7 Bar): 105L/min• Piston Displacement 206L/min• Weight: 34kg• 3.7 CFM @ 7 Bar• 92dB
Dire
ct D
rive
HOME
powe
r cab
le
2.5m
• Tank Capacity: 50L• Motor Capacity: 1.5kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa
(7 Bar): 105L/min• Piston Displacement 206L/min• Weight: 34kg• 3.7 CFM @ 7 Bar• 92dB
Dire
ct D
rive
HOME
powe
r cab
le
1.3mCode no: Barcode:MCFRC109 6003751340214
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
• Accessories include: 1x Paraffin spray gun, 1x Gravity feed spray, 1x Air duster, 1x Tyre inflator, 1x Coiled airline hose
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
DIYUse
DIYUse
DIYUse
DIYUse
Page 5
WA
RR
AN
TY
YE
AR
COMPRESSORS
ALL PRESSURE VESSELS CONFORM TO: PRESSURE EQUIPMENT REGULATIONS AND
SANS 347: 2010
DIRE
CT D
RIVE
COM
PRES
SORS
/ DI
RECT
DRI
VE S
ILEN
T OI
L FR
EE C
OMPR
ESSO
RS
100L DIRECT DRIVE COMPRESSORS100L / 1.5kW / 2.0HP Lubricated
Code no: Barcode:MCFRC103 6003751005533
100L / 2.2kW / 3.0HP Lubricated V Head
• Tank Capacity: 100L• Motor Capacity: 1.5kW• RPM: 2850/min • 230V/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa
(7 Bar): 105L/min• Piston Displacement 206L/min• Weight: 47kg• 3.7 CFM @ 7 Bar• 92dB
Dire
ct D
rive
HOME
powe
r cab
le
1.3m
• Tank Capacity: 100L• Motor Capacity: 2.2kW• RPM: 2850/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa (7 Bar): 165L/min• 324L/min Piston Displacement• Weight: 64kg • Twin Cylinder Air Pump• Manual Thermal Protector on Motor• 5.8 CFM @ 7 Bar• 95dB
Dire
ct D
rive
HOME
powe
r cab
le
1.3mCode no: Barcode:MCFRC113 6003751360090
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
24L / 550W / 0,75HP Silent Oil Free
Code no: Barcode:MCFRC241 6003398079065
50L / 750w / 1HP Silent Oil Free
SILENT OIL FREE DIRECT DRIVE MULTI CYLINDER COMPRESSORS 24L TO 50 L
• Tank Capacity: 24L• Motor Capacity: 0.75HP (550W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa
(6 Bar): 50L/min• Pump Displacement: 100L/min• Weight: 23kg • Twin Cylinder• 1.8 CFM @ 6 Bar• 42dB
• Tank Capacity: 50L• Motor Capacity: 1.0HP (750W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa
(6 Bar): 75L/min• Pump Displacement: 130L/min• Weight: 33kg • Twin Cylinder• 2.7 CFM @ 6 Bar• 43dB
Code no: Barcode:MCFRC242 6003398079072
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
• Low maintenance • Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes/workshops with a
noise restriction
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
• Low maintenance • Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes/workshops with a
noise restriction
Dire
ct D
rive
powe
r cab
le
1.8m
Dire
ct D
rive
powe
r cab
le
1.8m
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
DIYUse
Light Industrial
Light Industrial
Light Industrial
Page 6
WA
RR
AN
TY
YE
AR
COMPRESSORSDI
RECT
DRI
VE S
ILEN
T OI
L FR
EE C
OMPR
ESSO
RS
SILENT OIL FREE DIRECT DRIVE MULTI CYLINDER COMPRESSORS 50L TO 200 L
50L / 150kW / 2HP Silent Oil Free
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
Code no: Barcode:MCFRC243 6003398079089
• Tank Capacity: 50L• Motor Capacity: 2.0HP (2 x 750W)• RPM: 1450/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa
(6 Bar): 150L/min• Pump Displacement: 2x 130L/min (260L/min)• Weight: 45kg • 2x Twin Cylinders• 5.3 CFM @ 6 Bar • 45dB
• Low maintenance • Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes/workshops with a
noise restriction
Dire
ct D
rive
powe
r cab
le
1.8m
100L / 1,5kW / 2HP Silent Oil Free
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
Code no: Barcode:MCFRC244 6003398089910
• Tank Capacity: 100L• Motor Capacity: 2.0HP (2 x 750W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 700kPa (7 Bar)• Free Air Delivery @ 600kPa
(6 Bar): 150L/min• Pump Displacement: 2x 130L/min (260L/min)• Weight: 45kg • 2x Twin Cylinders• 5.3 CFM @ 6 Bar • 45dB
• Low maintenance • Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes/workshops with a
noise restriction
Dire
ct D
rive
powe
r cab
le
1.8m
200L 3,3kW / 4,4HP Silent Oil Free
150L / 3,3kW / 4,4HP Silent Oil Free
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
OIL FREE
compressor
OIL
FR
EE
• O
IL F
REE • OIL FREE • OIL FREE • O
IL FRE
E • O
IL FREE • OIL FREE
Code no: Barcode:MCFRC247 6003398101308
• Tank Capacity: 150L• Motor Capacity: 4,4HP ( 3 x 1100W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 800kPa
(8 Bar): 330L/min• Pump Displacement: 3x 180L/min (540L/min)• Weight: 120kg • 3x Twin Cylinders• 11.7 CFM @ 8 Bar • 81dB• Quick Coupler with 1/2” Ball Valve
Code no: Barcode:MCFRC248 6003398101315
• Tank Capacity: 200L• Motor Capacity: 4,4HP (3 x 1100W)• RPM: 1380/min • 230V~/50Hz• Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 800kPa
(8 Bar): 330L/min• Pump Displacement: 3x 180L/min (540L/min)• Weight: 150kg • 3x Twin Cylinders• 11.7 CFM @ 8 Bar • 81dB• Quick Coupler with 1/2” Ball Valve
• Low maintenance • 4 Pole motors• Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes/workshops with
a noise restriction
Dire
ct D
rive
powe
r cab
le
1.8m
Dire
ct D
rive
powe
r cab
le
1.8m
• Low maintenance • 4 Pole motors• Longer running life• For use in dentistry, food packaging
and general applications• Ideal for complexes with a noise
restriction
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
Light Industrial
Light Industrial
Industrial
Industrial
Page 7
WA
RR
AN
TY
YE
AR
COMPRESSORS
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
100L 1.5kW 2.0HP Lubricated Cast Iron V Head
100L 2.2kW 3HP Lubricated Cast Iron W Head
V HEAD BELT DRIVE COMPRESSOR
W HEAD BELT DRIVE COMPRESSORS
• Tank Capacity: 100L • Motor Capacity: 1.5kW • Motor with Manual Overload Protector • RPM: 2850/min • 220V-50Hz • Max RPM: 900 • Maximum Pressure: 800Kpa (8Bar)• Free Air Delivery @700Kpa
(7 Bar): 100L/Min • Piston Displacement: 165L/Min • Weight: 75Kg • 3.5 CFM @ 7 Bar • 93dB
• Tank Capacity: 100L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa
(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 85Kg • 9.4 CFM @ 7 Bar • 95dB
150L 2.2kW 3HP Lubricated Cast Iron W Head
• Tank Capacity: 150L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar)• Free Air Delivery @700Kpa
(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 115Kg• 9.4 CFM @ 7 Bar • 95dB
ALL PRESSURE VESSELS CONFORM TO: PRESSURE EQUIPMENT REGULATIONS AND
SANS 347: 2010
• 2 Cylinder V style cast iron heads • AIA Approved tank • CE Approved tank• Cast iron manifold with
quick couplers• Fully enclosed belt guard• Four wheels
• 3 Cylinder W style cast iron heads• AIA Approved tank • Double pulley system • Pressure switch with metal gauge • Dual outlet with quick connectors,
regulator & water filter• Long reach handle
150L 2.2kW 3.0HP Lubricated Cast Iron V Head
• Tank Capacity: 150L • Motor Capacity: 2.2kW • Motor with Manual Overload Protector • RPM: 2850/min • 220V-50Hz • Max RPM: 900 • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa
(7 Bar): 200L/Min • Piston Displacement: 165L/Min • Weight: 75Kg • 7.1 CFM @ 7 Bar • 93dB
• 2 Cylinder V style cast iron heads • AIA Approved tank • CE Approved tank• Cast iron manifold with
quick couplers• Fully enclosed belt guard• Four wheels
V HE
AD &
W H
EAD
BELT
DRI
VE C
OMPR
ESSO
RS
powe
r cab
le
1.8m
work
Belt
Drive
powe
r cab
le
1.8m
work
Belt
Drive
powe
r cab
le
1.8m
work
Belt
Drive
powe
r cab
le
1.8m
work
Belt
Drive
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
• 3 Cylinder W style cast iron heads• AIA Approved tank • Double pulley system • Pressure switch with metal gauge • Dual outlet with quick connectors,
regulator & water filter• Long reach handle
Industrial
Industrial
Industrial
Industrial
Code no: Barcode:
MCFRC227 6003398086261
Code no: Barcode:MCFRC228 6003398086278
Code no: Barcode:MCFRC222 6003398087992
Code no: Barcode:MCFRC221 6003398087985
Page 8
WA
RR
AN
TY
YE
AR
COMPRESSORS
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
SAF E
T Y • P
E RF O RM A N C E • RE L IA B ILT Y
S A F E T Y • P E R F O R M A N C E • R E L I AB I L T
YAIA APPROVED
ALL PRESSURE VESSELS CONFORM TO: PRESSURE EQUIPMENT REGULATIONS AND
SANS 347: 2010
200L 2.2kW 3HP Lubricated Cast Iron W Head
• Tank Capacity: 200L • Motor Capacity: 2.2kW • RPM: 2850/min • 230V-50Hz • Maximum Pressure: 800Kpa (8Bar) • Free Air Delivery @700Kpa
(7 Bar): 265L/Min • Piston Displacement: 370L/Min • Weight: 125Kg• 9.4 CFM @ 7 Bar • 95dB
Code no: Barcode:MCFRC229 6003398086285
W HEAD BELT DRIVE COMPRESSORS
W H
EAD
BELT
DRI
VE /
PETR
OL D
RIVE
N BE
LT D
RIVE
COM
PRES
SORS
powe
r cab
le
1.8mwo
rk
Belt
Drive
100L 4.8kW Belt Drive 4 Stroke 6.5HP Petrol Air Compressor
Code no: Barcode:MCFRC210 6003751342676
100L 8.2kW Belt Drive 4 Stroke 11HP Petrol Air Compressor
• Tank Capacity: 100L• Motor Capacity: 4.8kW (6.5HP)• 4 Stroke Petrol Potor • Maximum Pressure: 800kPa (8 Bar)• Free Air Delivery @ 700kPa (7 Bar): 265L/min• Piston Displacement: 364L/min• Weight: 75kg• 9.4 CFM @ 7 Bar • 100dB
• Tank Capacity: 100L • Heavy Duty Base• Motor Capacity: 8.2kW (11HP)• 4 Stroke Petrol Motor • Maximum Pressure: 1200kPa (12 Bar)• Free Air Delivery @ 1100kPa (11 Bar): 350L/min• Piston Displacement: 519L/min• Weight: 130kg• 12.4 CFM @ 11 Bar • 100dB
Code no: Barcode:MCFRC235 6003398053409
work
Belt
Drive
Petro
l
work
Belt
Drive
Petro
l
• 3 Cylinder W style cast iron heads• AIA Approved tanks • Double pulley system • Pressure switch with metal gauge • Dual outlet with quick connectors,
Regulator & water filter• Long reach handle
Light Industrial
Industrial
Light Industrial
PETROL BELT DRIVE COMPRESSORS
Page 9
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
DUST
ERS
/ INF
LATO
RS /
WAS
H GU
NS /
UNDE
R CO
ATIN
G GU
NS
Air Duster
Code no: Barcode:TOOS1751 6003751001658
Inflating Gun
• Short nozzle• BSP Air Inlet: 1/4”/ 6.35mm• Max. Working Pressure: 9 bar (130PSI)• Min Air Compressor Required:
1.5HP/ 1.1kWSuitable for blowing and cleaning away sweepings etc.
• With Three Nozzles• Min Air Compressor Required:
1.5HP/ 1.1kWSuitable for inflating car tyres, bicycle tyres, air beds & inflatables, balls etc
Code no: Barcode:PAB1204 6003751340719
Blow Gun (Variable)
Code no: Barcode:PAB1208 6003751340795
• Extended nozzle • BSP Air Inlet: 1/4”/ 6.35mm• Max. Working Pressure: 8 bar (116PSI)• Min Air Compressor Required:
1.5HP/ 1.1kWSuitable for unblocking oilways in engines & machine parts, cleaning electrical circuit boards & computers, general cleaning duties in & around the workshop
Paraffin Spray Gun
• Cup Capacity: 1000cc • Adjustable nozzle for fine or course spray • BSP Air Inlet: 6.5mm• Max. Working Pressure: 10 bar(145PSI) • Suitable Compressor: 1.1kW/ 24L & aboveUse to clean: Motor vehicles, boats, engines & outer componentsSuitable for lubrication of suspension parts & machinery
Code no: Barcode:TOOS1746 6003751001085
Washing Gun
• 6.5mm Air Inlet • Connects to a 1/2” or 12.5mm hose pipe• Working Pressure: 4-7 bar (60-100PSI)• Average Air Consumption @ 100%
Duty Cycle: 220L/min (8CFM)• Min Air Compressor Required:
3HP/ 2.2kWSuitable for: Cleaning paths, drains & patios, cleaning garden furniture, cleaning grime from car bodywork; cleaning conservatory guttering & roofs; removing rust from underneath wheel arches & vehicle bodyworkCode no: Barcode:PAB1211 6003751340832
Undercoating Gun
• Suction Feed• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 4 bar (60PSI)• Ave. Air Consumption:
321L/min (11CFM) • Min Air Compressor Required:
3HP/ 2.2kW
Code no: Barcode:TOOG747 6003751345622
Semi Industrial
DIYUse
Semi Industrial
Semi Industrial
DIYUse
Semi Industrial
Page 10
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
Deluxe Mini HVLP Spray Gun
Code no: Barcode:TOOS1790 6003751339171
• Fluid nozzle: 1.4mm• 100cc Cup Size• 3 Control adjustment valves: a) Paint Flow b) Fan Adjustment c) Air Control• Working Pressure: 2.5-5 bar (30-80PSI)• Average Air Consumption @ 100%
Duty Cycle: 160-300L/min (5.7-11CFM)• Min. Compressor Required: 2HP/1.5kw
Air Sand Blasting Kit
Code no: Barcode:TOOG749 6003751004253
Air Brush Set
Code no: Barcode:PAB1209 6003751340818
Sand Blaster Gun
Code no: Barcode:PAB1210 6003751340825
• Suction feed for blasting material• Air coupler plug • Working Pressure: 6 bar (90PSI)• Average Air Consumption @ 100%
Duty Cycle: 220L/min (8CFM)• Min Air Compressor Required:
3HP/ 2.2kWSuitable for: removing old paint, rust spots etc, renovation of plants & machinery
Mini Gravity Feed Touch Up Gun - K3
• Gravity flow cup• 125cc Cup Capacity• BSP Air Inlet: 1/4”/ 6.35mm• Adjustable spray pattern• Fluid adjustment knob• Working Pressure: 1.5-3 bar (20-40PSI)• Average Air Consumption @ 100%
Duty Cycle: 110L/min (4CFM)• Min Air Compressor Required:
2HP/ 1.5kW
Code no: Barcode:TOOS1742 6003751026767
Gravity Feed Spray Gun
• Fluid Nozzle: 1.4mm• BSP Air Inlet: 1/4”/ 6.35mm• Cup Capacity: 600cc• Working Pressure: 3.5-8 bar (40-116PSI)• Average Air Consumption @ 100%
Duty Cycle: 200L/min (7CFM)• Min. Compressor Required: 3HP/2.2kw
Code no: Barcode:TOOS1744 6003751000149
Gravity Feed Spray Gun
• Fluid Nozzle: 1.5mm • Plastic Cup: 500cc• Pattern Width: 120-220mm • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 3-4 bar (45-60PSI)• Average Air Consumption @ 100%
Duty Cycle: 280L/min - 10CFM• Min. Compressor Required: 3HP/2.2kw Suitable for most types of paint spraying including cellulose & oil based paints; emulsion & gloss paints for walls & ceilings, low viscosity wood stain & varnish
Code no: Barcode:PAB1206 6003751340726
• Hand piece & protective cap • 22cc Cup • 5cc Metal Cup• 60cc Mixing jar with lid • Spray jar • Spanner • PVC Airline hose with adaptors• Working Pressure: 1-3 bar (14-45PSI)• Average Air Consumption @ 100%
Duty Cycle: 11-22L/min (0.4-0.8CFM)• Min. Compressor Required: 0.75HP/0.55kw Suitable for: Hobby enthusiasts & model makers, fine spray nozzles, spraying with cellulose & enamel paints
Gravity Feed Spray Gun
• Standard Nozzle: 1.4mm• Cup Capacity: 600cc • BSP Air Inlet: 1/4”/ 6.35mm• 3 Control adjustment valves: a) Paint Flow b) Fan Adjustment c) Air Control• Working Pressure: 3.5-8 bar (50-70PSI)• Average Air Consumption @ 100%
Duty Cycle: 228L/min (8CFM)• Min. Compressor Required: 3HP/2.2kw
Code no: Barcode:TOOS1789 6003751000354
Spare cup for S1789TOOS1792 6003751010094
SAND
BLA
STIN
G GU
NS /
AIR
BRUS
H KI
TS /
GRAV
ITY
FEED
SPR
AY G
UNS
• 3x 6.35mm Spare Nozzles• 1x Air Jet• Complete with 1 metre hose
and pick up tube• Min Air Compressor Required:
2HP/ 1.5kWUse to clean old paint, carbon and stubborn deposits.Adjust pressure between 3 bar and 6.6 bar until desired result is obtained.May be used with sand abrasive particles, liquid detergents as well as dry air for cleaning of parts and surfaces.
Semi Industrial
DIYUse
DIYUse
DIYUse
Industrial DIYUse
Professional
DIYUse
Page 11
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
5Pc Spray Gun Kit
Code no: Barcode:TOOS1786 6003751002136
Includes:• 1x Suction feed High Pressure Spray Gun • 1x Paraffin Spray Gun • 1x Tyre Inflator • 1x Air Duster • 1x 5m Coiled Hose
with 1/4” /6.35mm BSP Fittings• Min. Compressor Required:
1.5HP/1.1kw
Suction Feed High Pressure Spray Gun
Code no: Barcode:PAB1207 6003751340733
• Fluid Nozzle: 1.5mm• Aluminium Canister: 1000cc• BSP Air Inlet: 1/4”/ 6.35mm• Pattern Width: 120-220mm• Working Pressure: 3-4 bar (45-60PSI)• Average Air Consumption @ 100% Duty
Cycle: 340L/min (12CFM) • Suitable Compressor: 2HP & aboveSuitable for most types of paint spraying including cellulose & oil based paints; emulsion & gloss paint for walls & ceilings, low viscosity wood stain & varnish
SUCT
ION
FEED
SPR
AY G
UNS
/ ACC
ESSO
RY K
ITS
Suction Feed Low Pressure Spray Gun
Code no: Barcode:TOOS1784 6003751000088
• Fluid Nozzle: 1.3mm• Optional Nozzle: 1.2mm• Canister Capacity: 800cc• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 1-3.5 bar (10-40PSI)• Average Air Consumption:
85L/min (3CFM)• Min. Compressor Required: 2HP/1.5kw
DIYUse
Suction Feed High Pressure Spray Gun
Code no: Barcode:TOOS1785 6003751001399
• Standard Nozzle: 1.6mm • Paint Nozzle: 2.0mm• Adjustable Spray Pattern • External mix nozzle• Canister Capacity: 1000cc• Non-bleeder type, siphon feed• Dual action trigger• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 3.5-5 bar (40-70PSI)• Average Air Consumption @ 100%
Duty Cycle: 280L/min (10CFM)• Min. Compressor Required: 4HP/3kw
Industrial
DIYUse
Suction Feed High Pressure Spray Gun
• Standard Nozzle: 1.8mm• Canister Capacity: 1000cc• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 3.5-5 bar (40-70PSI)• Average Air Consumption @ 100%
Duty Cycle: 200L/min (7CFM)• Min. Compressor Required: 3HP/2.2kw
Code no: Barcode:TOOS1769 6003751000286
Industrial
Spray Gun Holder
Code no: Barcode:TOOS1791 6003751358790
DIYUse
Code no: Barcode:PAB1205 6003751340689
5Pc Accessory Kit DIYUse
DIYUse
Includes:• 1x Gravity Feed Spray Gun
With 1.5mm Nozzles • 1x Degreasing Gun • 1x Blow Gun • 1x Tyre Inflator • 1x 5m Air Hose &
1/4” /6.35mm BSP Couplers• Max. Working Pressure:
8 bar (116PSI)• Min. Compressor Required:
1.5HP / 1.1kw
Suitable for most kinds of spray guns
Page 12
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
Die Grinder 1/4”(6mm) Collet
Code no: Barcode:PAB1360 6003751340801
4” (100mm) Angle Grinder
• BSP Air Inlet: 1/4”/ 6.35mm• Free Speed: 22,000/min• Working Pressure: 6.5 bar (95PSI) • Ave. Air Consumption at 100%
Duty Cycle: 311L/min (11CFM)• Min Air Compressor Required: 3HP/ 2.2kWIncludes: • 5x 6mm Moulded Stones • 2x Hand Wrenches • 1x Connecting NippleSuitable for grinding & smoothing rough castings; removing rust from metalwork; general workshop use, model making, etc.
Code no: Barcode:PAB1340 6003751340849
Dual Action Sander 6”(150mm) Pad Size
Code no: Barcode:PAB1342 6003751340863
• BSP Air Inlet: 1/4”/ 6.35mm• Free Speed: 9000/min • Working Pressure: 6.5 bar (95PSI)• Ave. Air Consumption at 100%
Duty Cycle: 396L/min (14CFM) • Min Air Compressor Required:
4HP/ 3kW Suitable for: Finishing body filler, ideal for contoured surface
Reversible Air Drill With Chuck
Code no: Barcode:PAB1300 6003751340696
1/2” (12.5mm) Impact Wrench & Socket Set
Code no: Barcode:PAB1310 6003751340702
1/2” (12.5mm) Drive Ratchet Wrench
• 1/2” Drive Ratchet • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 Bar (95PSI)• Ave. Air Consumption @ 100% Duty Cycle:
650L/min (18CFM) • Min Air Compressor Required: 4HP/ 3kW Includes: • 7x 1/2” Drive Sockets: 9, 10, 11, 13, 14, 17, 19mm • 2x Extension Bars • 1x Swivel • 1x Connecting Nipple We recommend the use of an inline lubricator (PAB1222) from the TRADEair range of accessories. You will also require an air hose to connect to your compressorSuitable for: fast removal & refitting of nuts; ideal for production line environment
Code no: Barcode:PAB1315 6003751340757
• Disc Size: 100mm x 16mm bore • BSP Air Inlet: 1/4”/ 6.35mm• Free Speed: 11,000/min • Working Pressure:
6.5 bar (95PSI) • Ave. Air Consumption at
100% Duty Cycle: 396L/min (14CFM)
• Min Air Compressor Required: 4HP/ 3kWSuitable for: Car body work & metal fabrication applications
Chipping Hammer Set
Code no: Barcode:PAB1320 6003751340740
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
• Drill Capacity: 10mm • Reversible Pistol Action• BSP Air Inlet: 1/4”/ 6.35mm• Free Speed: 1,800/min • Working Pressure: 6.5 bar (95PSI)• Ave. Air Consumption @ 100%
Duty Cycle: 198L/min (7CFM)• Min Air Compressor Required:
3HP/ 2.2kWSuitable for: All types of wood & metal drilling, workshop & automotive use
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
• Air Hammer • BSP Air Inlet: 1/4”/ 6.35mm• Max Speed: 3,000blow/min• Working Pressure: 6.5 Bar (95PSI)• Ave. Air Cons. @ 100% Duty Cycle:
141L/min (5CFM) • Min Air Compressor Required:
2HP/ 1.5kWIncludes:• 4x Chisels • 1x Spring Retainer • 1x Connecting NippleSuitable for: chipping tiles, paving & brickwork etc, sheet metal fabrication
• 1/2” Impact Wrench • 16mm Bolt Capacity • BSP Air Inlet: 1/4”/ 6.35mm• Free Speed: 7,000/min • Working Pressure: 6.5 Bar (95PSI)• Ave. Air Cons. @ 100% Duty Cycle: 650L/min (23CFM) • Min Air Compressor Required: 5HP/ 4kW Includes: • 1/2” Drive Extension Bar • 10x 1/2” Drive Impact Sockets: 9, 10, 11, 13, 14,
17, 19, 22, 24, 27mm • 6.5mm Air Inlet• Mini Oiler • Connecting Nipple • Air Tool OilSuitable for: automotive applications, removing vehicle wheel nuts, metal construction applications, etc.
GRIN
DERS
/ S
ANDE
RS /
DRI
LLS
/ W
RENC
HES
/ H
AMM
ERS
DIYUse
DIYUse
DIYUse
DIYUse
DIYUse
DIYUse
DIYUse
Page 13
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
Air Nailer/ Staple gun
Code no: Barcode:PAB1350 6003751340771
• Air Inlet Coupler • Working Pressure: 6.5 bar (95PSI)• Avg. Air Consumption at 100%
Duty Cycle: 142L/min (6CFM)• Minimum Compressor Required:
2HP/ 1.5KW• Uses F series nails: 10 - 32mm PAB1366 F10/ PAB1367 F15/ PAB1368 F20/ PAB1369 F25/ PAB1370 F30• Uses ffg staples: 6 - 32mm PAB1361 10mm long/ PAB1363 11mm long/ PAB1364 28mm longSuitable for: nailer - fixing mouldings, cladding & picture framing, stapler - use in upholstery
Air Finishing Nailer
Code no: Barcode:PAB1352 6003751340788
• Air Inlet Coupler • Working Pressure: 6.5 bar (95PSI)• Avg. Air Consumption at 100%
Duty Cycle: 142L/min (6CFM)• Minimum Compressor Required:
2HP/ 1.5KW• Uses T series nails(15 - 50mm)Suitable for: Fixing mouldings, cladding & picture framing
Air h
ose
REQ
IN-L
INE
LUBR
ICAT
ORRE
COMM
ENDE
D
IN-L
INE
LUBR
ICATO
RRE
COMM
ENDE
D
Air h
ose
REQ
18 Guage Staples 1000Pc
* For use on TRADEair stapler PAB1350
18 Guage Air Nails 1000Pc
* For use on TRADEair stapler PAB1350 & PAB1352
1/4” (6.35mm) Pressure Regulator/ Water Filter
• Designed to reduce moisture content in the air flow and adjust the air pressure
• 6.5mm Female inlet & outlet • Complete with pressure guage sockets • Manual pressure adjustment• Working Pressure: 0-12 bar (0-175PSI)
Code no: Barcode:PAB1220 6003751340870
• Automatically lubricates air line system• Helps to reduce wear on air tools.• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 8 bar (116PSI)• Max. Working Pressure: 11 bar / 156PSI* Do not use on spray gun
Code no: Barcode:PAB1222 6003751340917
Inline Lubricator
1/4” (6.35mm) Regulator & Water Trap Combo
Code no: Barcode:TOOR1489 6003751017192
• A good spray job requires clean air, free from oil & water
• This simple device is easily attached between your spray gun and air line and removes water and oil with very little pressure reduction
• Maximum Pressure: 10 bar (145PSI)• Maximum Temperature: 60ºC (140F)
NAIL
& S
TAPL
E GU
NS /
LUBR
ICAT
ORS
1L Air Compressor Oil
Code no: Barcode:TOOO1286 6003751009449
Code no: Desc.: Barcode:PAB1361 10mm 6003751340887 PAB1363 19mm 6003751343901PAB1364 28mm 6003751343918
Code no: Desc.: Barcode:PAB1366 F10 6003751343925 PAB1367 F15 6003751343932PAB1368 F20 6003751343949PAB1369 F25 6003751343956 (1.22mm)PAB1370 F30 6003751343963
• For lubrication of air compressors; with rust inhibitors to prevent internal corrosion of components
DIYUse
DIYUse
Staple gun
Code no: Barcode:PUAT3001CH 6003751032287
• Gauge: 20• Crown: 11.2mm• Shank Width: 1.20mm• Staple Length: 10-22mm
Semi Industrial
Industrial
Professional
Professional
DIYUse
DIYUse
Professional
Page 14
WA
RR
AN
TY
YEAR
PNEUMATIC TOOLS
Coupler Quick BSP Female
Code no: Barcode:TOOC340 6003751002686
Coupler 1/4“ BSP Female
Code no: Barcode:TOOC342 6003751003485
Coupler 1/4“ BSP Male
Code no: Barcode:TOOC341 6003751003478
Coupler 8mm Air Hose
Code no: Barcode:TOOC344 6003751003508
Tailpiece 8mm Hose 1/4“ BSP Male
Code no: Barcode:TOOC346 6003751003522
Hose To Split Nut Fitting 6mm
Code no: Barcode:TOOC349 6003751016492
5Pc 3/8” (8mm) Air Hose Coupler Set
Code no: Barcode:TOOC348 6003751002280
HOSE
FIT
TING
S / C
OUPL
INGS
/ AI
R HO
SES
PVC Airline Hose With Fittings
Code no: Barcode:TOOH910 6003751009616
Rubber High Pressure Air Hose• Abrasion & weather resistant - wont kink• Ideal for high pressure lines & compressors • Max. working Pressure: 17.5 bar (25PSI)
PVC High Pressure Air/Water Hose• Abrasion & weather
resistant - wont kink• Ideal for high
pressure lines & compressors
• Max. working Pressure: 17.5 bar (25PSI)
Code no: Desc.: Barcode:TOOH501 6mm x 20m 6003751011367 TOOH502 8mm x 20m 6003751011374TOOH503 10mm x 20m 6003751011381TOOH506 6mm x 100m 6003751028839TOOH507 8mm x 100m 6003751025548TOOH508 10mm x 100m 6003751028846TOOH514A 8mm x 10m 6003751028846
Code no: Desc.: Barcode:TOOH509 6mm x 20m 6003398068830 TOOH510 8mm x 20m 6003398068847TOOH511 6mm x 100m 6003398068854TOOH512 8mm x 100m 6003398068861TOOH513 10mm x 100m 6003398068878
• Abrasion & weather resistant - wont kink
• Ideal for high pressure lines & compressors
• Max. working Pressure: 17.5 bar (25PSI)
Professional
• Max. Working Pressure: 20 Bar (290PSI)• 1/4” / 6.35mm
Professional Professional
Professional Professional
Professional
• Max Working Pressure: 20 Bar (290PSI)• 1x Air Quick Coupler With 1/4" / 6.35mm Female• 1x Air Coupler Plug To 1/4" / 6.35mm BSP Male• 1x Air Coupler Plug To 1/4” / 6.35mm BSP Female• 1x Air Coupler Plug To 8mm Air Hose Plug• 1x 8mm Air Hose Plug To 1/4” / 6.35mm BSP Male
Professional
Professional ProfessionalProfessional
• Max. Working Pressure: 20 Bar (290PSI)• 1/4” / 6.35mm
• Max. Working Pressure: 20 Bar (290PSI)• 1/4” / 6.35mm
• Max. Working Pressure: 20 Bar (290PSI)• 1/4” / 6.35mm
• Max. Working Pressure: 20 Bar (290PSI)• 1/4” / 6.35mm
• Max. Working Pressure: 20 Bar (290PSI)
Page 15
PNEUMATIC TOOLS
WA
RR
AN
TY
YEAR
100mm Air Blow Gun
Code no: Barcode:PUAA5006 6003751004512
Professional Air Blow Gun
Code no: Barcode:PUAA3020 6003751020598
300mm Air Blow Gun
Code no: Barcode:PUAA5006-3 6003751009210
Air Duster
Code no: Barcode:PUAA3010 6003751020581
Air Grease Gun
Code no: Barcode:PUAT6036 6003751005144
• Steel 100mm Nozzle• Plastic P.O.M Body• Air Inlet: 1/4” (6.35) PT (NPT)• Max. Working Pressure:
11 bar / 156PSI
• Aluminium Body & Nozzle • Air Inlet: 1/4” (6.35) PT (NPT)• Max. Working Pressure:
11 bar / 156 PSI
• Steel 300mm Nozzle• Plastic P.O.M Body• Air Inlet: 1/4” (6.35) PT (NPT)• Max. Working Pressure:
11 bar / 156PSI
• Aluminium Body & Nozzle• Air Inlet: 1/4” (6.35) PT (NPT)• Max. Working Pressure:
11 bar / 156 PSI
• Capacity (bulk): 400cc • Output Pressure: 248 bar / 3600 PSI• Grease Port Oultet: 1/8” (3mm)PT• Air Inlet: 1/4” (6.35) PT (NPT)• Air Hose(I.D.): 3/8” (9.5mm)• Air pressure: 6.3N.m• Loading Ways:
C105 - Stand 14 or 14.5 / C107: Grease cartridge / C108: Loading with dispenser / C109: Loading with bulk grease
• Min. Compressor Required: 2HP/1.5kw
HEAV
Y DU
TY B
LOW
GUN
S / D
USTE
R / G
REAS
E GU
N
Semi Industrial
Semi Industrial
Semi Industrial
Industrial
Professional
Page 16
PNEUMATIC TOOLSW
AR
RA
NT
Y
YEAR
HEAV
Y DU
TY S
PRAY
GUN
S / D
RILL
S / S
CREW
DRIV
ERS
3/8”(10mm) Reversible Air Drill With Chuck
Code no: Barcode:PUAT4031 6003751004833
3/8” (10mm) Angle Air Drill with Chuck
Code no: Barcode:PUAT4035 6003751020864
1/2” (13mm) Air Drill with Chuck
Code no: Barcode:PUAT4041 6003751004857
• Drilling Capacity: 10mm • Reversible Pistol Action • Free Speed: 1,800/min • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95 PSI) • Ave. Air Consumption @
100% duty: 198L/min (7CFM) • Min Compressor Required:
2.5HP/1.8kw
• Drilling Capacity: 13mm • Non-reversible Pistol Action • Free Speed: 400/min• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI) • Air Consumption @ 100%
Duty: 280L/min / 10CFM • Min Compressor Required:
3HP/2.2kw
• Drilling Capacity: 10mm • Non Reversible Pistol Action• Free speed: 1,900/min• BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI) • Air Consumption @ 100% Duty:
198L/min (7CFM)• Min Compressor Required:
2.5HP/1.8kw
Professional
Oil & Water Separator
Code no: Barcode:PUAA2002 6003751011541
1/4” (6.35mm) Mini In-Line Oiler
Code no: Barcode:PUAA3040 6003751026897
• 6.5mm Female & male inlet• Max. Working Pressure:
11 bar / 160PSI* Do not use on spray guns
• Working Air Pressure: 12 bar (174PSI) • A good spray job requires clean air, free from oil
& water • This simple device is easily attached between
your spray gun and air line and removes water and oil with very little pressure reduction
Deluxe Mini HVLP Suction Feed Spray Gun
Code no: Barcode:PUAS1040 6003751004567
• Standard Nozzle: 1.6mm• Optional Nozzle: 1.0, 1.5, 1.8 & 2.0mm • BSP Air Inlet: 1/4”/ 6.35mm• Canister Capacity: 1000cc• Working Air Pressure: 2-3.4 bar (30-50PSI) • Air Consumption @ 100% Duty:
280L/min (10CFM)• Min. Compressor required: 3.0HP/2.2kw
Semi Industrial
Semi Industrial
HIgh Pressure Gravity Feed Spray Gun
Code no: Barcode:PUAB1006 6003751003201
• Nozzle: 0.3mm • Cup Capacity: 20cc, Screw-up type cup • Double action trigger - air/paint control • Adaptor permits use with propel can or air
compressor• Working Air Pressure: 1-3 bar (14-45PSI) • Air Consumption @ 100% Duty: 22L/min
(0.8CFM) • Min. Compressor required: 0.75HP/0.55kwExcellent for fine art work and hobby crafts
Semi Industrial
DIYUse
DIYUse Professional
Code no: Barcode:PUAT7037 6003751020604
5” (125mm) Air Angle Grinder
• Free Speed: 11,000/min • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI) • Average Air Consumption @
100% Duty Cycle: 396L/min (14CFM)• Min. Compressor Required: 4HP/3kw
Professional
Page 17
PNEUMATIC TOOLS
WA
RR
AN
TY
YEAR
HEAV
Y DU
TY S
CREW
DRIV
ERS
/ GRI
NDER
S / S
ANDE
RS /
GRIN
DERS
1/4” (6.35mm) Air Die Grinder Kit
Code no: Barcode:PUAT7033K 6003751005311
• 1x PUAT7033 • Overall Length: 160mm • Free Speed: 22,000RPM • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI) • Average Air Consumption @
100% Duty Cycle: 11 CFM • Min. Compressor Required: 3HP/2.2kwIncludes• 2x Wrenches • 10x Grinding Stones• 1x Blow Mould Case
1/4” (6.35mm) Extended Air Die Grinder
Code no: Barcode:PUAT7033L 6003751005328
• Capacity Bolt Size: 6mm • Free Speed: 25,000RPM• BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI)• Average Air Consumption
@ 100% Duty Cycle: 141L/min (5 CFM)• Min Compressor Required:
3HP/2.2kw
1/4” (6.35mm) Air Die Grinder
Code no: Barcode:PUAT7033 6003751005304
• Overall Length: 160mm• Capacity Bolt Size: 6mm• Free Speed: 22,000RPM • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI) • Average Air Consumption @ 100% Duty
Cycle: 311L/min (11 CFM)• Min. Compressor
Required: 3HP/2.2kw
6” (150mm) Dual Action Air Sander
Code no: Barcode:PUAT7015P 6003751005212
800RPM Air Screwdriver
Code no: Barcode:PUAT4080A 6003751020826
• Hex Shank Size: 6.35mm • Bolt Size: 6mm• Pistol adjustable clutch • Free Speed: 800/min • Max Torque: 52 - 167N.m • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI)• Air Consumption
@ 100% Duty: 198L/min (7CFM) • Min. Compressor Required:
2.5HP/1.8kw
• Spindle Thread: 150mm • Free Speed: 9,000/min• BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar
(95PSI) • Average Air Consumption @
100% Duty Cycle: 396L/min (14CFM)
• Min. Compressor Required: 4HP/3kw
5” (127mm) Air Orbital Sander
Code no: Barcode:PUAT7018 6003751005243
• Sand Paper: 93 x 228mm • Free Speed: 8,000/min • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI)• Average Air Consumption @
100% Duty Cycle: 396L/min (14 CFM) • Min. Compressor Required: 4HP/3kw
1800RPM Air Screwdriver
Code no: Barcode:PUAT4080 6003751004918
• Hex Shank Size: 6.35mm • Bolt Size: 6mm• Pistol Adjustable Clutch • Free Speed: 1,800/min • Max Torque: 52 - 130N.m • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI)• Air Consumption @ 100% Duty:
198L/min (7CFM) • Min Compressor Required:
2.5HP/1.8kw
ProfessionalProfessional
Professional DIYUse
DIYUse
DIYUse
DIYUse
Page 18
PNEUMATIC TOOLSW
AR
RA
NT
Y
YEAR
HEAV
Y DU
TY W
RENC
HES
1/2” (12.5mm) Drive Impact Wrench
Code no: Barcode:PUAT5043 6003751004970
• Bolt Capacity: 16mm • Pin clutch type • Free speed: 7,000/min• Max Torque: 23N.m 350ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI)• Air Consumption @100% Duty:
764L/min (27CFM) • Min. Compressor Required:
5Hp/4.4kw
1/2” (12.5mm) Drive Impact Wrench
Code no: Barcode:PUAT5044 6003751021007
• Bolt Capacity: 16mm • Twin hammer clutch type • Free Speed: 7,000/min• Max Torque: 55N.m 400ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar/95PSI• Avg. Air Consumption @ 100%
Duty Cycle: 650L/min (23CFM) • Min. Compressor Required: 5HP/4.4kw
3/4” (19mm) Drive Impact Wrench
Code no: Barcode:PUAT5060 6003751004994
• Bolt Capacity: 25mm • Single hammer clutch type• Free Speed: 4,500/min • Max Torque: 69N.m 500ft/lbs • Air Inlet: 10mm • Working Air Pressure: 6.5 bar
(95PSI)• Avg. Air Consumption
@ 100% Duty Cycle: 850L/min (30CFM)
• Min. Compressor Required: 7.5HP/5.5kw
3/4” (19mm) Drive Impact Wrench
Code no: Barcode:PUAT5061 6003751005007
• Bolt Capacity: 19mm • Pin clutch type • Free Speed: 4,200/min • Max Torque: 100N.m 700ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar
(95PSI)• Avg. Air Consumption
@ 100% Duty Cycle: 850L/min (30CFM)
• Min. Compressor Required: 7.5HP/5.5kw
Industrial Industrial
Industrial
1/2” (12.5mm) Drive Impact Wrench
Code no: Barcode:PUAT5040 6003751020048
• Bolt Capacity: 16mm • Single hammer clutch type • Free speed: 7,000/min• Max Torque: 27N.m 220ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI)• Air Consumption @ 100% Duty:
650L/min (23CFM) • Min. Compressor Required: 5HP/4kw
17Pc 1/2” (12.5mm) Drive Impact Wrench Kit
Code no: Barcode:PUAT5004 6003751004949
• 1x 12.5mm Drive Impact Wrench• Single hammer clutch type • Bolt Capacity: 16mm • Free Speed: 7,000/min• Max Torque: 30N.m 220ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Pressure: 6.5 bar (95PSI)• Air Consumption @ 100% Duty: 650L/min (23CFM) • Min Compressor Required: 5HP/4kw Includes• 10x Air Sockets:10,11,12,13,15,17,19,21,22,24,mm• 1x 5” Extension Bar • 1x Oil Pot• 1x Hex Wrench • 1x Nipple• 1x Plastic Case • 1x Mini Oiler
1/2” (12.5mm) Drive Impact Wrench
Code no: Barcode:PUAT5041 6003751004963
• Bolt Capacity: 16mm • Pin clutch type • Free Speed: 7,000/min• Max Torque: 32N.m 230ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar• Air Consumption @ 100% Duty:
650L/min (23CFM) • Min Compressor Required: 5HP/4kw
Professional Professional
Professional
Professional
Page 19
PNEUMATIC TOOLS
WA
RR
AN
TY
YEAR
7.5” (190mm) Air Hammer With 4 Chisels (Round)
Code no: Barcode:PUAT2020/R 6003751004680
Universal Spring Retainer
Code no: Barcode:PUAT2001 6003751004628
• 1x Air Hammer • Blow Per Minute: 3 000/min) • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar • Air Consumption @ 100% Duty: 255L/min (9CFM)• Min Compressor Required: 3HP/2.2kwIncludes - • 1x Air Nailer Scaler Attachment (AT-2071)• 1x Mini Oiler • 1x Spring Retainer • 5x 7” Chrome Molybdenum ChiselsSuitable for chipping tiles, paving and brickwork etcand sheet metal fabrication
• For use with PUMA 190mm Air hammer PUAT2020/R
HEAV
Y DU
TY W
RENC
H / R
ATCH
ET W
RENC
H / T
OOL
OIL
/ HAM
MER
S
Industrial
Code no: Barcode:PUAT5052 6003751020574
3/8” (10mm) Drive Air Ratchet Wrench
• Bolt Capacity: 10mm • Twin hammer clutch type • Free Speed: 160/min • Max Torque: 6.9N.m 50ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI) • Ave. Air Consumption @ 100% Duty Cycle: 650L/min(18CFM) • Min. Compressor Required: 4HP/3kw
1/2” (13mm) Drive Air Ratchet Wrench
Code no: Barcode:PUAT5053 6003751004987
• Bolt Capacity: 13mm • Single hammer clutch type • Free Speed: 160/min • Max Torque: 6.9N.m 50ft/lbs • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI) • Ave. Air Consumption @ 100% Duty Cycle: 650L/min (18CFM) • Min. Compressor Required: 5HP/4kw
1L Air Tool Oil
Code no: Barcode:TOOO1285 6003751005526
• For in-line lubrication of air tools• With rust inhibitors to prevent internal
corrosion of components
150 x 25mm (1”) Drive Impact Wrench
• Bolt Capacity: 32mm • Twin hammer clutch type • Free Speed: 3,000/min • Max Torque: 152N.m 900ft/lbs • Air Inlet : 12.5mm• Working Air Pressure: 6.5 bar (95PSI) • Ave. Air Consumption @ 100% Duty Cycle: 1500L/min (53CFM) • Min Compressor Required: 10HP/7.5kw
Code no: Barcode:PUAT5086 6003751005021
Industrial
Industrial
Professional
DIYUse
Industrial
Page 20
PNEUMATIC TOOLSW
AR
RA
NT
Y
YEAR
Nails - F Series
Code no: Spec: Barcode:PUF20 20mm 6003751005410PUF25 25mm 6003751005427PUF30 30mm 6003751005434
Professional Air Stapler
Code no: Barcode:PUAT3001 6003751004765
Professional F30 Air Nailer
Code no: Barcode:PUAT3010 6003751004796
• Crown: 11.2mm • Shank Width: 1.2mm• Gauge: 20 • Uses J series staples • Staple Length: 10 - 22mm• Working Air Pressure: 6.5 bar • Air Consumption @ 100%
Duty: 85L/min (3CFM)• Min. Compressor Required:
2HP / 1.5kw
• Crown: 9.1mm • Shank Width: 1.25mm• Gauge: 18 • Uses F Series Nails• Working Air Pressure: 6.5 bar • Average Air Consumption
@ 100% Duty Cycle: 5CFM• Min Compressor Required: 2HP
5000PC PER BOX• Guage: 18• Thickness: 1.25mm
Nails - T Series Staples - J Series
Code no: Spec: Barcode:PUT20 20mm 6003751005441PUT25 25mm 6003751005458PUT32 32mm 6003751005465PUT38 38mm 6003751005472PUT45 45mm 6003751005489PUT50 50mm 6003751005496
2500PC PER BOX• Guage: 16• Thickness: 1.6mm
Code no: Spec: Barcode:PU1010J 10mm 6003751017819PU1013J 13mm 6003751007803PU1016J 16mm 6003751017826PU1019J 19mm 6003751017833PU1022J 22mm 6003751017840
5000PC PER BOX• Guage: 20 • Crown: 11.2mm• Thickness: 0.6mm
Industrial
Industrial Industrial Industrial
4.8mm Air Hydraulic Riveter
Code no: Barcode:PUAT6015 6003751005069
Air Hydraulic Riveter Kit
Code no: Barcode:PUAT6015K 6003751005076
• Traction Power: 720kg • Stroke Length:14mm • Overall Length: 273mm• BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar
(95PSI)• Average Air Consumption
@ 100% Duty Cycle: 110L/min (4CFM)
• Min Compressor Required: 2HP/1.5kw
• 1x AT6015 Air Riveter • BSP Air Inlet: 1/4”/ 6.35mm• Working Air Pressure: 6.5 bar (95PSI)• Average Air Consumption @ 100%
Duty Cycle: 110L/min (4CFM) • Min. Compressor Required: 2HP/1.5kwIncludes:• Air Hose Joint • Rivets • Oiler • Nose Pieces: 3/32”, 1/18”, 5/32” • 3/16” Jaw Case • Jaw • Jaw Case Joint • Jaw Pusher • Return Springs • Valve Pusher Spring • Jaw Pusher Spring • Frame O-Rings • Frame Back-Up Rings • Oil Piston O-Rings & Back-Ups • Hanging Clip O-Ring • Frame joint O-Ring & Back Ups • Frame Brass Joint • Valve Pusher O-Rings • Valve • Valve Cap O-Ring • Air Piston Ring • Lock Nut O-Ring • Air Cylinder O-Ring • Spanner Gauge • Spanner • Blowmould case
Industrial
HEAV
Y DU
TY W
RENC
HES
Professional
Professional