computer aided design - machining training solutions aided design about the class cad (computer...
TRANSCRIPT
ComputerAidedDesignAbout the ClassCAD (Computer Aided Design) software is used by designers, inventors,
engineers, architects, artists and most anyone needing to transform ideas into
physical reality. In the CAD environment, virtual components are created in 3
dimension and combined to create complex working assemblies. The form, �t,
function, and tolerance can be evaluated and working speci�cations derived
from the CAD models in the form of 2-dimensional CAD drawings. In manu-
facturing, most design speci�cations are communicated using a CAD platform.
Modern advanced manufacturing equipment gets its command information
from CAD as well, either directly from the CAD model (3D printing) or via a
secondary platform known as CAM (Computer Aided Manufacturing).
The CAD module is suited for individuals who wish to gain an understanding
of the software tool used extensively in the areas of design, engineering, and
manufacturing. Those interested in CNC (Computer Numeric Control)
programming and CAM (Computer Aided Manufacturing) will also bene�t.
MTS certi�cations are equivalent to AMSE Y14.5 - 2009.
Dates2 Days (16 hours)
September 12th and 15th
Registration Deadline: August 29th
$1,200 per student instructor-led online or at MTS
For onsite training, there is an $800 per day
instructor fee + student fee (Minimum 5 students)
(Travel expenses not included)
Cost
Classes will be from 9:00am to 5:00pm
There will be a 30 minute break for lunch at
12:30pm.
Times
Class Information
[email protected] 407.478.6606 910 Waterway PlaceLongwood, FL 32750
Machining • Training • Solutionswww.machiningsolutions.com