CONCRETE ACCESSORIES

Radius

Ref.

Face

Ref.

Face

Ref.

Radius with TailCat.No. Radius Ref.

602 1/2” 3/8” 603 3/4” 9/16” 604 1” 3/4”

Triangular with TailCat.No. Ref. Face

611 23/32” 1/2” 612 1-1/16” 3/4” 613 1-13/32” 1” 614 2-1/8” 1-1/2”

TriangularCat.No. Ref. Face

621 23/32” 1/2” 622 1-1/16” 3/4”

623 1-13/32” 1”

RUSTICATION STRIPS create an architectural reveal in walls or other concrete elements. Manufactured from rigid ABS, Rustication Strips are reusable, maintain a smooth and even reveal, and are ideal for eliminating seams on form liner applications.

ELEPHANT TRUNK is a flexible PVC chute used to confine and direct concrete during placement in forms. Hoppers, Collars, and Clamps are convenient accessories for safely and efficiently funnelling concrete into the Elephant Trunk. Elephant Trunks are shipped in 50’ rolls but should not be used in lengths greater than 25 feet.

No. 690 STEEL BANDING CLAMPS are universally sized for securing any Elephant Trunk to Hoppers or Collars.

STAINLESS STEEL COLLARS are available for 8” and 12” diameter Elephant Trunk and enable a quick release from the Hopper.No. 688.....8”No. 689.....12”

ELEPHANT TRUNK DIAMETERSNo. 681.....6”No. 682.....8” No. 683.....12”

A

B

C

Cat.No. A B C320 3/4” 1-1/4” 3/4” 321 1” 1-3/8” 3/4” 322 1-1/2” 2-1/8” 3/4”

No. 484 3-IN-1 HOPPERS are constructed from highly durable, yet lightweight plastic for easy handling. The intake is 36” square with a graduated discharge that can be trimmed to fit 6”, 8”, and 12” diameter Elephant Trunks.

Greenstreak ®

CHAMFER STRIPS are flexible PVC strips used for forming rounded or angled edges in columns, walls, or other concrete elements. They are reusable, can prevent leakage, and are ideal for radius applications in round columns. Chamfer profiles are shipped in 8’ lengths.

TILT-UP SHIMS are manufactured from High Impact Polystyrene (HIPS) and have a bearing capacity of 10,000 PSI. Sika Greenstreak Shims will not rot, rust, or cause staining of the concrete.

Shims are color coded for easy size identification and can be purchased by individual size or banded packs.

*Packs contain three 1/4”, two 1/8”, and one 1/16” shims for a pack thickness of 1-1/16”.

Cat.No. Width Length Thickness015 4” 6” 1/4”016 4” 6” 1/8”017 4” 6” 1/16”018 4” 6” *Pack

Cat.No. Width Length Thickness044 4” 4” 1/4”045 4” 4” 1/8”046 4” 4” 1/16”047 4” 4” *Pack

ZIPCAP 2-PIECE CONTROL JOINT FORMER eliminates saw cutting and creates a control joint with excellent aggregate interlock. Installs easily in fresh concrete.

Cat.No. Depth855 1” 856 1-1/2”857 2”

940 941 942 9433/8"

1/2"

1/2"

1/2"

3/4"

1/2"

1"

1/2"

1/2” board

1/2” board

3/4” board

1” board

EXPANSION BOARD CAP fits over an expansion board to prepare the joint for caulks or sealants. After the concrete is placed, the upper cap is removed leaving a clean void for sealants.

Cat.No.

3 1/2"

1 1/4"

1 1/2"

No. 521 PLASTIC KEYWAY is a lightweight, impact resistant keyway former that can be easily stapled or nail to wood forms.

ACI GUIDELINES suggest 1/4 of sub depth for sawcut or Zipcap depth.

V. August 2014

All products shown on this flyer are provided in ten foot lengths unless noted otherwise. Please call for carton quantities.

SIKA CORPORATION3400 Tree Court Industrial Blvd.St. Louis, MO 63122Phone: 800.325.9504

Contact Sika Waterproofing Team 800.325.9504 • usa.sika.com

Greenstreak ®