conditions thermal comfort v2

3
 www.sensirion.com  Version 2.0 Februa ry 2010 1/3 Conditions of Thermal Comfort Influence of Humidity and Temperature on Personal Well-Being Basic Considerations Thermal comfort is defined as that condition of mind which expresses satisfaction with the thermal environment. A lot of empirical data has been collected on how these parameters are defined. This Application Note gives a short introduction on thermal comfort especially in respect of humidity and temperature. The factors that have relevant influence on the thermal comfort of occupant’s spaces can be divided in environmental and personal factors. En vironme ntal factors:  temperature  thermal radiation  humidity  air speed Pe rsonal factors:  personal activity and condition  clothing Considering these factors climate systems can be made more apt to the needs of users on one hand, but also more efficient on the other hand. And if such a system is using energy only if it is really needed – thus energy consumption may be reduced. Pe rsonal Factors Perception of the environmental conditions and the feeling of comfort are related to metabolic heat production, its transfer to the environment, and the resulting adjustments of body temperature. For defining a comfort zone of  external parameters it is important to know the activity of  an individual person: Are people sitting and working in an office, are they doing sports in a gym, are they sick in a hospital or are they hiking somewhere outdoor? A second parameter is clothing – through its insulating properties it is an important parameter of body heat conservation or loss and hence for feeling thermal comfort. Clothing is changing to a great extent by the season and outdoor weather conditions. Therefore, the limits for  external parameters defining a comfort zones are made depende nt of the season . Cond itions for com fort given in this document refer summer and winter clothing that typically are worn in European or North-American countries. Because of individual differences, it is impossible to specify a thermal environment that will satisfy everyone. Conditions stated in this document will ensure that 80% or  more of the occupants will find the environment thermally acceptable. The conditions of com fort w ere found by studies of North American and European subjects. Recent studies with Japanese subjects led basically to the same results. Therefore, it can be assumed that these conditions of comfort can applied with good approximation in most parts of the world.  External Factors – Comfort Zone by ASHRAE Thermal radiation and air speed are mainly out door  effects which are difficult to control and measure. Therefore, literature on thermal comfort focuses on humidity and temperature. Figure 1 Relative humidity (RH) / temperature (T) diagram based on comfort zone according to ASHRAE 55-1992.  T RH 58.3 29.3 86.5 20.5°C 69.0 °F 24.5°C 76.0°F 23.5°C 74.3°F 23.0% 19.5°C 67.1°F 57.3 24.4 79.5 22.5°C 73.0°F 27.0°C 81.0°F 26.0°C 79.0°F 19.8 23.5°C 74.0°F Summer  Winter  Preface Thermal comfort is an important concept for climate control systems and beyond. When does one feel comfortable, at what conditions does one feel discomfort and when does it get dangerous? This Application Note gives three approaches to determine a comfort zone and define limits: Comfort Zones according to ASHRAE, to ISO and the concept of Heat Index. With the knowledge of comfort conditions climate controlling systems may be designed to be more to the needs of the user, being more efficient and this way save energy. As it comes clear in this document, relative humidity and temperature play an important role, and hence the well-being may be improved by simply applying a humidity and temperature sensor.

Upload: nirmalasiva1

Post on 06-Apr-2018

225 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Conditions Thermal Comfort V2

8/3/2019 Conditions Thermal Comfort V2

http://slidepdf.com/reader/full/conditions-thermal-comfort-v2 1/3

 

www.sensirion.com  Version 2.0 – February 2010 1/3

Conditions of Thermal ComfortInfluence of Humidity and Temperature on Personal Well-Being

Basic Considerations

Thermal comfort is defined as that condition of mind whichexpresses satisfaction with the thermal environment. A lotof empirical data has been collected on how theseparameters are defined. This Application Note gives ashort introduction on thermal comfort especially in respectof humidity and temperature.

The factors that have relevant influence on the thermalcomfort of occupant’s spaces can be divided inenvironmental and personal factors.

Environmental factors:

  temperature  thermal radiation  humidity  air speed

Personal factors:

  personal activity and condition  clothing

Considering these factors climate systems can be mademore apt to the needs of users on one hand, but alsomore efficient on the other hand. And if such a system isusing energy only if it is really needed – thus energyconsumption may be reduced.

Personal Factors

Perception of the environmental conditions and the feelingof comfort are related to metabolic heat production, itstransfer to the environment, and the resulting adjustmentsof body temperature. For defining a comfort zone of external parameters it is important to know the activity of an individual person: Are people sitting and working in anoffice, are they doing sports in a gym, are they sick in ahospital or are they hiking somewhere outdoor?

A second parameter is clothing – through its insulatingproperties it is an important parameter of body heat

conservation or loss and hence for feeling thermal comfort.Clothing is changing to a great extent by the season andoutdoor weather conditions. Therefore, the limits for 

external parameters defining a comfort zones are madedependent of the season. Conditions for comfort given inthis document refer summer and winter clothing that

typically are worn in European or North-Americancountries.

Because of individual differences, it is impossible tospecify a thermal environment that will satisfy everyone.Conditions stated in this document will ensure that 80% or more of the occupants will find the environment thermallyacceptable. The conditions of comfort were found bystudies of North American and European subjects. Recentstudies with Japanese subjects led basically to the sameresults. Therefore, it can be assumed that these conditionsof comfort can applied with good approximation in most

parts of the world. 

External Factors – Comfort Zone by ASHRAE

Thermal radiation and air speed are mainly out door effects which are difficult to control and measure.Therefore, literature on thermal comfort focuses onhumidity and temperature.

Figure 1 Relative humidity (RH) / temperature (T) diagrambased on comfort zone according to ASHRAE 55-1992. 

T

RH

58.3

29.3

86.5

20.5°C69.0 °F

24.5°C76.0°F

23.5°C74.3°F

23.0%

19.5°C67.1°F

57.3

24.4

79.5

22.5°C73.0°F 27.0°C81.0°F

26.0°C79.0°F

19.8

23.5°C74.0°F

Summer Winter 

Preface

Thermal comfort is an important concept for climatecontrol systems and beyond. When does one feelcomfortable, at what conditions does one feel discomfortand when does it get dangerous? This Application Notegives three approaches to determine a comfort zone anddefine limits: Comfort Zones according to ASHRAE, toISO and the concept of Heat Index.

With the knowledge of comfort conditions climatecontrolling systems may be designed to be more to theneeds of the user, being more efficient and this way saveenergy. As it comes clear in this document, relativehumidity and temperature play an important role, andhence the well-being may be improved by simply applyinga humidity and temperature sensor.

Page 2: Conditions Thermal Comfort V2

8/3/2019 Conditions Thermal Comfort V2

http://slidepdf.com/reader/full/conditions-thermal-comfort-v2 2/3

 

Application Note: Conditions of Thermal Comfort

www.sensirion.com Version 2.0 – February 2010 2/3 

The thermal experience by an individual not only dependson temperature but also on humidity: The higher thehumidity the higher the experienced temperature. Thiseffect is based upon the fact that at higher humidity thebodies cooling system by transpiring water on the skin isreduced.

ASHRAE (American Society of Heating, Refrigerating andAir-Conditioning Engineers) in its publication on thermalenvironmental conditions for human occupancy hasdefined a comfort zone for winter and summer season1.This definition of comfort zone is somewhat complex butcan be transformed by some approximation to a zonewhich only depends on relative humidity and temperature – see Figure 1.

The effect of feeling higher temperature with high relativehumidity is reflected by slanting boundaries of the comfortzone for the upper and lower temperature limits.

This has an impact on HVAC control systems: Energy canbe saved when indoor spaces are monitored for bothhumidity and temperature, because e.g. when humidity islow, a higher temperature is acceptable and cooling is notnecessary. In a system which only is controlled bytemperature, unnecessary heating or cooling may be doneeven if conditions still are within the comfort zone.

Comfort zone according to ISO7730

Another approach for defining the comfort zone is done bythe standard ISO77302. It neglects the fact that higher 

temperatures can be borne at low humidity. Therefore itsupper and lower temperature limits are vertical. Thisapproach can be used in less demanding applications for simpler implementation of air-conditioning algorithms.

Figure 2 RH/T diagram showing the comfort zone accordingto ISO7730

1 ASHRAE Standard: Thermal Environmental Conditions for Human occupancy:ANSI/ASHRAE 55-1992

2 ISO Standard: Moderate thermal environments- Determination of the PMV andPPD indices and specification of the conditions for thermal comfort: ISO7730 

While simple temperature ranges are given per season therelative humidity is set between 30%RH and 70%RH inwinter and summer time, respectively. The limits are set todecrease the risk of unpleasantly wet or dry skin, eyeirritation, static electricity, microbial growth and respiratorydiseases.

Heat Index – Alert in the Extreme

At high humidity, high temperature conditions, the well-being may be controlled with the concept of Heat Index.Heat Index indicates how the human body feelstemperature.

The heat index is based on subjective measurements andis only meaningful above 25°C and 40%RH. The mostpopular definition of the Heat Index is the one of theNational Weather Service and Weather Forecast Office of the National Oceanic and Atmospheric Administration 

(NOAA). The Heat Index in °C is given by

2222

212

221

202

22011011000

www

www

UtctUcUtc

UctctUcUctccHI

 

with the following coefficients:

c00 -8.7847 c02 -0.0164

c10 1.6114 c21 2.2117·10-3 

c01 2.3385 c12 7.2546·10-4 c11 -0.1461 c22 -3.5820·10-6 

c20 -0.0123

Table 1 Coefficients for Heat Index formula Figure 3 displays the Heat Index as a function of relativehumidity and temperature.

27

30

35

40

45

50 55 60 70 80 90

25

30

35

40

40 50 60 70 80 90 100

Relative Humidity (%RH)

    T   e   m

   p   e   r   a    t   u   r   e    (    °    C    )

Figure 3 Heat Index in °C.

The meaning of the values is defined as follows:

< 30°C: no discomfort30 – 40°C: some discomfort

40 – 45°C: great discomfort> 45°C: dangerous> 54°C: heat stroke imminent 

T

RH

70%

30%

20.0°C68.0°F

23.0°C73.4°F

24.0°C75.2°F

26.0°C78.8°F

Winter  Summer 

Page 3: Conditions Thermal Comfort V2

8/3/2019 Conditions Thermal Comfort V2

http://slidepdf.com/reader/full/conditions-thermal-comfort-v2 3/3

 

Application Note: Conditions of Thermal Comfort

www.sensirion.com Version 2.0 – February 2010 3/3 

Revision History

Date Version Page(s) Changes

27 May 2003 0.1 1 – 3 Initial release

25 May 2005 1.0 1 – 3 Changed company address

27 June 2009 1.1 1 – 3 Addition of address in China, layout changes21 February 2010 2.0 1 – 3 Complete rework of the document, addition of the concept of Heat Index

© Copyright 2010 by SensirionCMOSens® is a trademark of Sensirion

All rights reserved

Headquarter and Sales OfficesHeadquarter SENSIRION AG Phone: +41 44 306 40 00Laubisruetistr. 50 Fax: +41 44 306 40 30CH-8712 Staefa ZH [email protected] Switzerland http://www.sensirion.com/ 

Sales Office USA: SENSIRION Inc. Phone: +1 805 409 49002801 Townsgate Rd., Suite 204 Fax: +1 805 435 0467Westlake Village, CA 91361 [email protected] USA http://www.sensirion.com/ 

Sales Office Japan: 

SENSIRION JAPAN Co. Ltd. Phone: +81 3 3444 4940Postal Code: 108-0074 Fax: +81 3 3444 4939Shinagawa Station Bldg. 7F, [email protected] 4-23-5, Takanawa, Minato-ku http://www.sensirion.co.jpTokyo, Japan 

Sales Office Korea:SENSIRION KOREA Co. Ltd. Phone: +82 31 440 9925~27#1414, Anyang Construction Tower B/D, Fax: +82 31 440 99271112-1, Bisan-dong, Anyang-city [email protected]  Gyeonggi-Province http://www.sensirion.co.kr  South Korea

Sales Office China:Sensirion China Co. Ltd. phone: +86 755 8252 1501Room 2411, Main Tower fax: +86 755 8252 1580Jin Zhong Huan Business Building, [email protected] Futian District, Shenzhen, www.sensirion.com.cn Postal Code 518048

PR China

Find your local representative at: http://www.sensirion.com/reps