www.commercial-solutions.netB.R. FUNSTEN & CO.WHOLESALE FLOORING PRODUCTS

TOM DUFFY COMPANYWHOLESALE FLOORING PRODUCTS

SEAMLESS INSTALLATION VPI offers 13 seam welding bead colors when seamless floors are required.

VPI can also provide 24” & 36” tile pre-grooved for easy seam welding on site.

Rose 905

Light Brown 904

Light Blue 909

Black 901

White 902

Rust 924

Sandstone 913

VINYL ESD

10 Black Ice 21 Rain Forest 09 Glacier 17 Platinum 52 Winter White 92 Patriot 53 Bone 16 Cloud 02 White 30 Eggplant 93 Storm

CONDUCTIVE AND STATMATE COLORS

Dark Brown 914

Off White 912

Jade 918

Gray 906

Light Gray 916

Dark Gray 915

PERFORMANCE PROPERTIES • ESD STATIC CONTROL TILECONDUCTILE FLOORING

Performance Properties

ESD Static Control Tile

CONDUCTIVE FLOORING

Technical Service: (800) 874-4240

GAUGE (thickness)

SIZE (in inches)

COMPOSITION

ANSI ESD S7.1 Resistance of Flooring Materials Conductile© used in conjunction with VPI adhesives very consistently meets S7.1 requirements. Result averages are summarized as follows:

Resistance (Ohms)Conductile & VPI 165 Adhesive, to Ground 2.1 X 105Conductile & VPI 165 Adhesive, Point to Point 3.5 X 105Conductile & VPI 150 Adhesive, to Ground 3.9 X 105Conductile & VPI 150 Adhesive, Point to Point 5.8 X 105

Data demonstrates that Conductile© used in conjunction with VPI adhesives very consistently meets S7.1 requirements for a conductive ESD flooring. (Test dataavailable upon request).

NFPA 99 Standard for Health Care FacilitiesNFPA 101 Life Safety CodeAATCC 134 Electrostatic PropensityANSI/UL 779 Electrically Conductive Floor CoveringASTM E84 Fire Resistance (Steiner Tunnel)FED STD 101C Static Decay, Method 4046 at 15% RHASTM E648 Critical Radiant Flux CRF (W/cm2)ASTM F150 Electrical Resistance

ASTM F925 Chemical Resistance

ASTM F970 Static Load

ASTM F1700 Solid Vinyl Floor Covering Materials

VPI 150 2 Part Epoxy Adhesive 0 VOC ContentAdhesive and Spread Rate Nominally 135 Sq.ft/gal but will vary due to application & substrate variables

VPI 165 1 Part Acrylic Adhesive 0 VOC ContentNominally 135 Sq.ft/gal but will vary due to application & substrate variables

Trowel Size Please refer to Installation & Maintenance Instructions

25 year wear / 75 year workmanship & materials

No wax required.

ESD Con Properties 16: 06-03-16

WARRANTY (See actual VPI WARRANTY for details)

MAINTENANCE (See Installation & Maintenance Instructions for details)

Electrical Performance Life Time Warranty

Grounding Materials Supplied with the Order One 2" x 24 " copper strip installed every 2,000 - 2,500 sq. ft.

Meets UL Standards< 12 Volts with conductive shoesPassesPasses

<.001" RI after 24hrs@ 250 psi (1.125" diameter foot) 2,500 psi @ .005" RI after 24 hrs (.05" diameter foot)

Excellent (Acids, Alkalis, Household, Chemicals)

Point to Point or Point to Ground 25,000 - 1,000,000 ohms>1.08 W/cm2 (NFPA 253 Class 1)

1/8" (3mm)

Homogeneous solid vinyl tile with encapsulated conductive elements distributedthroughout the structure.

Conforms

5000 - 0 Volts in < 0.01 Sec.<75 (Class II)

12" x 12"24" x 24" and 36" x 36"24" x 24" and 36" x 36" can be pre-grooved for seamless floor

3A - ESD CON Properties 16

VPI 150A two part epoxy adhesive specially engineered for use below grade (porous or non-porous) and /or with heavy load traffic or heavy static loads such as hospital beds. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 6 - 9. See adhesive section for more details including substrate requirements and open times. Zero detectable VOC’s.

Performance Properties

ESD Static Control Tile

STATIC DISSIPATIVE FLOORING

Technical Service: (800) 874-4240

GAUGE (thickness)

SIZE (in inches)

COMPOSITION

ANSI ESD S7.1 Resistance of Flooring Materials Point to Point or Point to Ground 1,000,000 - 1,000,000,000 ohmsNFPA 99 Standard for Health Care Facilities

NFPA 101 Life Safety Code

AATCC 134 Electrostatic Propensity

ANSI/UL 779 Electrically Conductive Floor Covering

ASTM E84 Fire Resistance (Steiner Tunnel)

FED STD 101C Static Decay, Method 4046 at 15% RH

ASTM E648 Critical Radiant Flux CRF (W/cm2)

ASTM F150 Electrical Resistance

ASTM F925 Chemical Resistance

ASTM F970 Static Load

ASTM F-1700 Solid Vinyl Floor Covering Materials

VPI 150 2 Part Epoxy Adhesive 0 VOC ContentAdhesive and Spread Rate Nominally 135 Sq.ft/gal but will vary due to application & substrate variables

VPI 165 1 Part Acrylic Adhesive 0 VOC ContentNominally 135 Sq.ft/gal but will vary due to application & substrate variables

Trowel Size Please refer to Installation & Maintenance Instructions

25 year wear / 75 year workmanship & materials

No wax required.

ESD SD Properties 16: 06-03-16

1/8" (3mm)

Homogeneous solid vinyl tile with encapsulated conductive elements distributedthroughout the structure.

Conforms

5000 - 0 Volts in < 0.20 Sec.<75 (Class II)

12" x 12"24" x 24" and 36" x 36"24" x 24" and 36" x 36" can be pre-grooved for seamless floor

Meets UL Standards< 30 Volts with conductive shoesPassesPasses

<.001" RI after 24hrs@ 250 psi (1.125" diameter foot) 2,500 psi @ .005" RI after 24 hrs (.05" diameter foot)

Excellent (Acids, Alkalis, Household, Chemicals)

Point to Point or Point to Ground 1,000,000 - 1,000,000,000 ohms>1.08 W/cm2 (NFPA 253 Class 1)

WARRANTY (See actual VPI WARRANTY for details)

MAINTENANCE (See Installation & Maintenance Instructions for details)

Electrical Performance Life Time Warranty

Grounding Materials Supplied with the Order One 2" x 24 " copper strip installed every 2,000 - 2,500 sq. ft.

PERFORMANCE PROPERTIES • ESD STATIC CONTROL TILESTATMATE FLOORINGVPI 165A simple to use one part adhesive for use on or above grade. Can be used on porous or nonporous substrates in applications with light to medium traffic. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 7 - 11. See adhesive section for more details including substrat requirements and open times. Zero detectable VOC’s.

All items available in: 12” x 12” • 24” x 24” • 36” x 36” sizes

www.commercial-solutions.netB.R. FUNSTEN & CO.WHOLESALE FLOORING PRODUCTS

TOM DUFFY COMPANYWHOLESALE FLOORING PRODUCTS

CUSTOM ESD

• Unique 18” x 36” and 18” x 18” formats, plus the standard sizes: 12’s, 24’s and 36’s

• 20+ colors versus the “standard” various shades of white and gray

• Any PRT color including vibrant red , yellow, blue, green, etc. can be supplied

• VPI can also supply ANY custom color that matches a client’s color scheme

• Longer performance warranties than ANY other commercial floor making it not only functional and beautiful but bullet proof

• VPI ESD/PRT can be water jet cut resulting in incredibly intricate logos and designs

• Price points are extremely competitive with all “standard” forms of ESD flooring

• Standard lead time for a custom/PRT color is 5 weeks, at a 10,000 SF minimum

Advance Surgical Theater at Brigham and Women’s Hospital Harvard Medical School, Boston MA, recipient of the prestigious AIA National Healthcare Design Award for Innovations in Planning & Design Research

Payette Architectural Firm – Boston, MA • Kevin B. Sullivan, FAIA, President, CEOLeon W. Drachman, AIA, Project Principal • Milly Baker, AIA, ACHA, LEED AP, Project Manager/Architect