The equipment used to move conductors from the rig’s V-door, through the derrick, the drill-floor rotary table and the platform guides and into the seabed is crucial. When handling 20–36-in. conductors that may be 12-m long and weigh up to 13 t, safety is paramount.

Moreover, this is an operation in which efficient installation can have a major bearing on the project’s economics. An experienced and highly skilled workforce is a precursor to the delivery of a safe and cost-effective operation.

CIS personnel are fully qualified and have substantial experience in the field of conductor installation. The company’s projects benefit from their unrivalled knowledge of conductor running and handling equipment.

Conductor running and handling equipment

Tools, experience and best-in-class customer service

About the technology

CIS undertakes all aspects of pipe handling, running and joint make-up using the full complement of tools, including • 200-t spider bowls and hand slips• side-door elevators• safety clamps• manual lightweight Gearench® strap tongs• TS 100-t bowls and drillpipe hand slips• drive funnels• conductor C-plates (false rotary).

CIS personnel are fully qualified and have substantial experience in the field of conductor installation. Projects benefit from their unrivalled knowledge of conductor running and handling equipment.

Adding value

CIS has established an enviable reputation for delivering best-in-class customer service. This is based on the experience and expertise of our personnel and their commitment to delivering excellence.

Operating data for conductors handled

Outside diameter (in.) 20, 24, 26, 30 and 36

Wall thickness (in.) ¾–2½

Length (m) up to 12

Weight (t) 13

Project profile

In a full turnkey operation for a conductor installation project in Tunisia for Houston-based Atlas Petroleum Group, CIS provided engineering assistance (in collaboration with a fellow Acteon company) and provided and installed three strings of 30-in. (1½-in. wall thickness) conductor.

To handle the 33 joints of 12-m pipe, CIS used the full range of conductor running and handling equipment, including• a 30-in. side door elevator• a 30-in. spider bowl and hand slips to suite• 30-in. lightweight Gearench manual strap tongs• a conductor rotary drive funnel• a 30-in. safety clamp• a TS 100-t spider bowl and drillpipe hand slips • a conductor C-plate (false rotary).

CIS also provided two S-90 hydraulic hammers in combination with Zone II power units and three deep-penetration drive shoes to reach the customer’s required penetration depth.

Please contact CIS for further information.

Conductor Installation Services LtdEurocentreCIS HouseNorth River RoadGreat YarmouthNorfolk NR30 1TEUnited Kingdom

Tel: +44 (0)1493 849680 Fax: +44 (0)1493 849681Email: info@c-i-services.com

www.c-i-services.com

Conductor running and handling equipment

OHSAS 18001