conec rj45 magnetic modular jack (rj45 mm-jack) rj45 magnetic modular jack (rj45 mm-jack)...
TRANSCRIPT
CONEC RJ45 Magnetic Modular Jack (RJ45 MM-Jack) RJ45SJS11AN010X
Page 1 of 2 Updated Aug. 08, 2005
Features
Integrated 10/100 Base-Tx Magnetic Module in MC210 circuit Integrated a 1000pF/2kv high DWV capacitor, 4 x 75Ω terminal resistors and LEDs Provide excellent EMI and common mode noise suppression; deliver enhanced filtering performance Fully compliant IEEE 802.3 and ANSI X3.263 Standards including Min. 350µH OCL (Open Circuit
Inductance) with 8mA DC bias and 1500Vrms isolation requirement Magnetic Circuit: MC210 (with LEDs)
RJ45RJ-5
RJ-4
RJ-2
RJ-1
Rx (1:1)
P8
P6
P7
P5
P2
P4
P3
P1
Tx (1:1)
L2
L1Green
LED
YellowL4
L3
LED
RJ-6
RJ-8
RJ-7
1000pF/2kv
75Ω
RJ-3
Electrical Specification @ 25oC; Operating Temperature: -40oC to +85oC
Insertion Loss
(dB Max.)
Return Loss
(dB Min.)
NEXT (Near End Cross Talk)
(dB Min.)
Differential to Common Mode
Rejection (dB Min.)
CMRR (Common Mode Rejection Ratio)
(dB Min.)
Hi-Pot
0.1 - 100 MHz
0.1 - 30 MHz
60 MHz
80 MHz
0.1 - 30 MHz
60 MHz
100 MHz
60 MHz
100 MHz
60 MHz
100 MHz
1500V (rms)
1.0 20.0 15.0 12.0 50.0 40.0 35.0 40.0 35.0 35.0 30.0 60 sec. • OCL (Open Circuit Inductance): Min. 350µH @ 8mA DC bias (-40oC to +85oC) • Leakage Inductance: Max. 0.35µH • Inter-winding capacitance: Max. 25pF • DC-Resistance: Max. 1.0Ω • Turns Ratio Tx/Rx =1:1/1:1 ± 3% • Rise Time & Fall Time: 3.0ns (Typical)
CONEC RJ45 Magnetic Modular Jack (RJ45 MM-Jack) RJ45SJS11AN010X
Page 2 of 2 Updated Aug. 08, 2005
Standard LED
Color Wavelength Forward Voltage with IF=20mA
Reverse Voltage with IR=10uA
Luminous Intensity with IF=20mA
Green 565nm 2.6V (MAX) 2.1V (TYP) 5.0V (TYP) 20mcd (MIN) 30mcd (TYP)
Yellow 585nm 2.6V (MAX) 2.0V (TYP) 5.0V (TYP) 15mcd (MIN) 25mcd (TYP)
Dimensions and Recommended PCB Layout
P1
L3 L4 L2 L1
Recommended PCB Layout
Top of PCB with Bottom of Opening
Recommended Panel Opening
NOTES:- Dimensions in millimeter- Tolerance ±0.10 unless specified