confidential chg 000285 settlement materialclassaction.kccllc.net/documents/kir0001/walk-in...1890...

1890 Swarthmore Avenue, PO Box 2020 Lakewood, NJ 08701tel.800-526-3694, 732-363-4700, fax.732-364-8110

www.chgusa.com

CONFIDENTIAL CHG 000285 SETTLEMENT MATERIAL

WALK-IN REFRIGERATIONCOMPONENTS


All photographs and illustrations are considered to be a representation of the actual item. In some cases there may be slight variations. Thiscatalog, copy, part numbers and unique method of illustrating products is copyrighted by Component Hardware Group. All rights reserved. Noportion of this catalog may be reproduced in any form or by any means in whole or in part, without the written consent of Component HardwareGroup, Inc. Component Hardware Group, Inc. reserves the right to make any and all changes and to discontinue any of its products withoutnotice. Not responsible for typographical errors.

© COPYRIGHT 2009 COMPONENT HARDWARE GROUP, INC.#CAT-X025-EE 05/09–3M PRINTED IN THE U.S.A.

NUMERICAL INDEX ON PAGE EE24

ALPHABETICAL INDEX

DESCRIPTION

AACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE23

DDOOR CLOSER

HYDRAULIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE11SPRING ACTION, HYDRAULIC . . . . . . . . . . . . . . . . . . . . . .EE12DOOR HINGE, LIFT-OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE7REVERSIBLE, SELF-CLOSING . . . . . . . . . . . . . . . . . . . . . .EE11

FFINISHING CAP, SNAP-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE23FOOT TREADLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE5

HHANDLES

BREAKER-ACTION HANDLE . . . . . . . . . . . . . . . . . . . . . . . . .EE5PULL HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE4

HEX WRENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE23HINGES

HINGE SELECTOR GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . .E1LIFT-OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE7HEAVY-DUTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6HEAVY-DUTY CAM-RISE . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE8 INVESTMENT CAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE10OUTDOOR ENCLOSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6REVERSIBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE11

LLATCHES

WALK-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE2HEAVY-DUTY WALK-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE3 INVESTMENT CAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE9OUTDOOR ENCLOSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6

LIGHTING FIXTURESFLUORESCENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE20INCANDESCENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE21

LIGHTING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . .EE21

MMOULDING, SNAP-ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE23

PPANEL FASTENERS . . . . . . . . . . . . . . . . . . . . . . .EE15 THRU EE19PANIC BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6PANEL FASTENER ADAPTERS, UNIVERSAL . . . . . . . . . . . .EE23PORTS

PRESSURE RELIEF . . . . . . . . . . . . . . . . . . . . . . . . .EE13, EE14WINDOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE22

POWER SPRING CONVERSION CARTRIDGE . . . . . . . . . . . . . .EE8

SSAFETY LATCHES . . . . . . . . . . . . . . . . . . . . . . . . . . .EE2, EE3, EE6SAFETY RELEASE . . . . . . . . . . . . . . . . . . . . . . . . . . .EE2, EE3, EE6

OUTDOOR ENCLOSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6PANIC BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE6

SAFE-T-VU™ WINDOW PORT . . . . . . . . . . . . . . . . . . . . . . . . . .EE22STRAP HINGE, LIFT-OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE7

VVENT PORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE13, EE14

WWINDOW PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EE22

PAGE


GROUP HINGE MODEL NUMBERS

A R20-1010, R20-1020, R45-1010, R40-1010, R42-2840, R42-2841, R42-2842, R42-2843, R42-2842-BR

B R42-2000, R42-2855, R56 SERIES

C R50-2850, R50-2850-SPO, R50-2850-BLK, R50-2850-SS, R50-2850-NL, R50-2850-BA

D W60 SERIES, W99-6015-SS, W99-4100-SSRH, W99-4100-SSLH, W55-1000, W56-1000

E N/A

F W99-2000, W99-2000-GE, W99-2062-G6, W77-1625

G N/A

H N/A

J N/A

CHG® HINGE GROUPS (ORDER IN PAIRS)

CHG® HINGE SELECTOR GUIDEThis hinge selector is to assist you in choosing the correct CHG hinges for commercial refrigeration, foodservice equipment, transportation, industrial and many other uses. The Load Chart below shows our recommended allowable load per pair of hinges for each hinge group.The data applies for normal conditions under static loading by door weight only. Other factors, such as positive or negative pressure, very high gasket compression, vibration, corrosive or abrasive atmospheres, or structural movement are not taken into account. It is the fi nal responsibility of the users to determine the suitability and capacity required in their specifi c applications.

HOW TO USE THIS CHART1. Locate the weight of your door in the far left column, headed DOOR WEIGHT.2. Find the width of your door along the bottom of the chart.3. Where the weight line and width column intersect, fi nd the recommended hinge group code (A, B, etc.)4. Select your hinges from the CHG® hinge groups below.NOTE: If exact dimensions and weight for your door is not shown, use the next higher width and weight.Hinge Groups A-C Shown in REACH-IN, Section EHinge Groups D-J Shown in WALK-IN, Section EE

HOW TO DETERMINE OFFSET FOR HINGES AND LATCHESWith door closed, measure the distance from the jamb to the door face.

DOOR WEIGHTS

kg. lb.

226.8 500 D D E F F F G G G G H H H H H H H J J J J

217.7 480 D D E F F F G G G G H H H H H H H J J J J

208.6 460 D D E E F F F G G G G H H H H H H H J J J

199.5 440 D D D E F F F G G G G G H H H H H H H J J

190.5 420 D D D E F F F F G G G G H H H H H H H H J

181.4 400 D D D E E F F F G G G G G H H H H H H H H

172.4 380 D D D D E F F F F G G G G G H H H H H H H

163.3 360 D D D D E E F F F G G G G G G H H H H H H

154.2 340 D D D D E E F F F F G G G G G G H H H H H

145.2 320 C D D D D E E F F F F G G G G G G H H H H

136.1 300 C D D D D D E E F F F F F G G G G G G G H

127.0 280 C D D D D D E E F F F F F G G G G G G G H

117.9 260 C C D D D D D E E F F F F F G G G G G G G

108.9 240 C C D D D D D D E E F F F F F F G G G G G

99.8 220 C C C D D D D D D E E E F F F F F F G G G

90.7 200 B C C D D D D D D D E E E F F F F F F F G

81.7 180 B C C C D D D D D D D E E E E F F F F F F

72.6 160 B B C C C D D D D D D D D E E E E F F F F

63.5 140 B B C C C C D D D D D D D D D D E E E E F

54.4 120 B B B C C C C C D D D D D D D D D D D E E

45.4 100 A B B B B C C C C C D D D D D D D D D D D

36.3 80 A A B B B B B C C C C C C D D D D D D D D

27.2 60 A A A A B B B B B B C C C C C C C C C D D

18.1 40 A A A A A A A A B B B B B B B B B C C C C

9.0 20 A A A A A A A A A A A A A A A A A A A A B

DOORWIDTH

in. 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72

cm. 30.5 38.1 45.7 53.3 61.0 68.6 76.2 83.8 91.4 99.1 106.7 114.3 121.9 129.5 137.2 144.8 152.4 160.0 167.6 175.3 182.9

JAMB JAMBDOOR

OFFSET

LOAD CHART

hinge selector guide & chart

EE1 www.chgusa.comCONFIDENTIAL CHG 000288

SETTLEMENT MATERIAL

800-526-3694

RECESSED MOUNTMODEL NO. DOOR THICKNESS

W28-3400 4”(100mm)

W28-3600 6”(152mm)

W28-3800 8”(200mm)

FRICTION FREE OPERATION...provided by utilizing roller bolt retraction combined withroller strike action. Eliminates wear and allowsdoors to close smoothly and easily withoutslamming, while offering superb gasket com-pression.EASY LIFT HANDLE user friendlyrequires minimal hand pressure to completelyretract bolt from strike. Low 1-1/2”(38mm) handle rise eliminates tugging and wrist twisting.

HEAVY- DUTY CONSTRUCTION ...to providethe impact resistance required in heavy trafficareas. The latch body is constructed of rein-forced die cast Zamak and furnished with asolid handle. All inner working parts and backplate are manufactured of solid stainlesssteel, unlike competitors models that can rustand leave unsightly stains on doors.

TAMPER PROOF DESIGN...eliminates pilferage of costly food stocks. Bolt cannot beretracted from the outside when latch is cylin-der locked or padlocked. Yet with safety insiderelease mechanism occupants can safely exiteven if latch is locked or padlocked.

W19-1000 NO CYLINDER LOCK POLISHED CHROME

W19-1000-C WITH CYLINDER LOCK POLISHED CHROME

W19-1000-SN NO CYLINDER LOCK SATIN CHROME

W19-1000-C-SN WITH CYLINDER LOCK SATIN CHROME









1-1/8” (29mm)

Ø 4-7/16”(113mm)

Ø 3-1/8”(79mm)

-15°

(4) HOLES ON 4-1/16”(103.2mm) CIRCLE FOR #10 SCREWS (5mm)

2-7/32”(56mm)

90°

3-17/32” (90mm)MIN. DEPTH OF

Ø 1” (25mm)CLEARANCE HOLE

Ø 3-1/2”(89mm)

5/8”(16mm)

1-17/32”(39mm)

INTERCHANGEABLE WITH KASON #58, #59 & #77

10-15/32”(266mm)

6-5/32”(157mm)

2-1/4”(57mm)

1-7/8”(48mm) 2-1/16”

(52.4mm)

2-31/32”(75mm)

3-1/16”(77.8mm)

13/32”(10mm)

1-1/8”(28.6mm)

2-15/16”(75mm) 2-3/16”

(55.6mm)

3-21/32”(92.6mm)

(4) CSK HOLES FOR 1/4” FLAT HEAD

SCREWS (6mm)

(3) CSK HOLES FOR 1/4”FLAT HEAD SCREWS (6mm)

2-19/32”(66mm)

5-9/32”(134mm)

2-3/32”(53mm) 2”(51mm)

Ø.5(13mm)

EASILY ADJUSTED STRIKE ASSEMBLY offers variable offset adjustment permitting field adjustment for door gasket wear.

ADDITIONAL ROD SIZESFOR VARYING DOOR

THICKNESSES AVAILABLEON APPLICATION

W19 SERIES

� SURFACE MOUNT and FLUSH MOUNT STYLES are available.� GLOW-IN-THE-DARK KNOB meets all industry safety standards.� Durable SOLID FIBERGLASS REINFORCED polyester

pushrod provides years of smooth, safe, frost-free operation and eliminates conductivity of cold air.

� Short Stroke engineering provides IMMEDIATE INSIDE RELEASEeven if latch is cylinder locked, padlocked or both.

� RECESSED DESIGN protects knob from exposure to traffic of heavy crates, hand trucks and loading vehicles.

� ALL STANDARD DOOR THICKNESSES are available.

SAFETY RELEASESW28 SERIES for recessed mount

SPECIFICATIONSKNOB: Glow-in-the-dark safety green thermoplasticFLANGE: Grey thermoplasticPUSH ROD: Non-conductive fiberglass reinforced polyesterNOTE: INSIDE RELEASES MUST BE ORDERED SEPARATELY

EXTRA HEAVY-DUTY SPRING MODEL AVAILABLE UPON REQUEST...IDEALLY SUITED FOR TRUCK BODY APPLICATION

walk-in door safety latches

W19 SERIES Designed especially for walk-in

refrigerators and freezers� Available in Polished Chrome

or Satin Chrome finish

EE2

TM

-1/8” TO 3/8”(-3mm to 10mm)

3/4” TO 1-5/8”(19mm to 41mm)

1-5/8” TO 2-1/2”(41mm to 64mm)

MODEL NO. DESC. FINISH OFFSET

INTERCHANGEABLE WITH KASON #489CONFIDENTIAL CHG 000289 SETTLEMENT MATERIAL

www.chgusa.com

SUPER HEAVY-DUTY CONSTRUCTION... andlarge body profile latch is designed to with-stand the most rigorous of commercial kitchenor cold room environments. Latch handle isproduced of lifetime SOLID FORGED BRASSconstruction. All inner working parts and backplate are manufactured of solid stainless steelwhich provide a rugged, smooth and rust-freeoperation.













-1/8” TO 3/8”(-3mm to 10mm)

3/4” TO 1-5/8”(19mm to 41mm)

1-5/8” TO 2-1/2”(41mm to 64mm)

INTERCHANGEABLE WITH KASON #56

� EASY LIFT HANDLE� HEAVY- DUTY CONSTRUCTION� FRICTION-FREE OPERATION� EASILY ADJUSTED STRIKE ASSEMBLY� TAMPER PROOF DESIGN

SURFACE MOUNTMODEL NO. DOOR THICKNESS

W28-2325 3-1/4”(82.5mm)

W28-2400 4”(100mm)

W28-2600 6”(150mm)

W28-2800 8”(200mm)

ADDITIONAL ROD SIZES FOR VARYING DOOR THICKNESSES AVAILABLE ON APPLICATION

Ø 2-7/32”(56mm)

Ø 2-25/32”(71mm)

120°

1-7/8”(48mm)

MIN. DEPTH OF 1”(25mm) CLEARANCE HOLE

2-13/32”(61mm)

Ø 1”(26mm)

Ø .5” (13mm)

INTERCHANGEABLE WITH KASON #487, 481 & 482

(3) HOLES ON 2-3/16”(55.5mm) Ø CIRCLE FOR #10 SCREWS

11-5/32” (283mm)

7-1/16”(179mm)

2-3/32”(53mm)

2-1/8”(54.0mm)

2-1/2”(63.5mm)

3-3/16”(81mm)

3-3/8”(85.7mm)

2” (51mm)

2-7/32”(57mm)

5-11/16”(145mm)

3-23/32”(94mm)

29/32”(22.9mm)

2-9/32”(57.9mm)

2-17/32”(64.3mm)

3-7/32”(82mm)

1-29/32”(48mm)

2-11/16”(68mm)



W38 SERIES

TM

heavy-duty walk-in door safety latches

W38 SERIES Designedespecially for walk-in

refrigerators and freezers� Available in Polished Chrome

or Satin Chrome finish

EE3

MODEL NO. DESC. FINISH OFFSET

9/16”(14 mm)

STAINLESS STEEL & BRASSRODS AVAILABLE (SPECIAL ORDER)

MODEL NO. DESCRIPTION

W28-2400-SS S/S ROD FOR 4” (100mm)WALL WITH BRASS KNOB

W28-2605 BRASS ROD FOR6” (150mm) WALL

SAFETY RELEASESW28 SERIES for surface mount


800-526-3694

TM

EE4

10-7/8”(276mm)

7”(177.8mm) 1-17/32”(39mm)

1-15/16”(49mm)

1-1/2” (38mm)

1-11/32”(34mm)

15/16”24mm)

3/16”(5mm)

1/8”(3mm)3-3/16”

(81mm)

2-7/8”(73mm)

HOLE FOR#12 OR M5

FLAT HEAD

SCREWS

walk-in cooler door pull handle

W29 SERIES DOOR PULL HANDLES

W29 SERIES

� NSF Listed� Heavy-duty high pressure zinc

die-casting� Satin chrome finish will not show

fingerprints� Polished chrome finish available� Ergonomic design offers

comfortable and easy door opening

� Non-handed-reversible feature for right or left hand swinging doors

� Glow-in-the-dark quick release inside safety mechanism providesoptimum security

� Locking and non-locking models available

� Concealed tamper-resistant mounting

� Ideal for all magnetic framed doors

� Release handle designed for 4”(100mm) or 6” (152mm) door thickness


W29-1000 WITHOUT CYLINDER

W29-1000-C WITH CYLINDER

W29-2000 WITHOUT CYLINDER

W29-2000-C WITH CYLINDER

W29-Y005-C INSIDE RELEASE

W29-X003-6 LONG RELEASE SHAFTFOR 6” (152mm) DOORTHICKNESS

A

D

B

FINISH REF.

SATIN CHROME C

SATIN CHROME A

POLISHED CHROME

POLISHED CHROME

B

D

INTERCHANGEABLE WITH KASON 1229 & 1229C

notshown

not shown

3 1/2"

2 5/8" DIA.

4"

3/8"

3/4"

1 1/4"

LOCK (LONG SHACKLE LOCK,MASTER #3LH OR EQUIVALENT)

(NOT INCLUDED)

W29-5000-4W29-5000-4

SIMPLE PADLOCKINGHASP SECURES ANYWALK-IN COOLER ORFREEZER DOOR.

2-5/8”

1-1/4”3/4”

3/8”

4”

LOCK (LONG SHACKLELOCK, MASTER 3LH OREQUIVALENT)-NOT INCLUDED

C

PADLOCK HASP WITH INSIDE RELEASE

� For 4" wall and flush door

� External parts are 300 series stainless steel with satin finish

� Plate can be locked in lock/openas well as locked/closed position

� Concealed mounting holes utilize #10 or #12 flat head screw

� Plastic glow in the dark inside release knob on solid brass rod


www.chgusa.comEE5

breaker-action door handle and foot treadle

� For Refrigeration Doors with Magnetic Gaskets� Aluminum Sand Cast Construction� Breaker Action Promotes Easy Door Opening� Satin Finish� Padlock and Cylinder Lock Models Available� Complete with Inside Safety Release� For Doors with 1-1/2ʺ Offset� Inside Release Designed for 4-5/8ʺ Door Thickness*

* Other lengths available on application

� Non-skid pedal surface� Stainless Steel pin and low friction bearings� Reversible for right or left hand door swing� Length–7-3/4"� Material–Aluminum� Brushed Aluminum Finish� Offsets–Flush, 1-5/8"� Screw Holes– 1/4" Hole, 82˚ Countersunk

W31-1000

W50-1000

FOOT TREADLEFor Safe & Convenient Hands-Free Door Operation

MAGNETIC DOOR BREAKER-ACTION HANDLE

W31-1000

W31-1000-C

W31 SERIES HANDLE REPLACES:STANDARD KEIL (2820 & 9180)DENT (D-83)

W50-1000

2”(5

0.8m

m)

4-11

/16”

(119.4

mm

)

4-13/16”(122.2mm)

W50-Y001Pedal Assembly

3-7/1

6”(8

7.4m

m)

2”(5

0.8m

m)

3-15/32”(87.9mm)

2-15/32”(62.5mm)

W60-X003Treadle

1-1/2”(38mm)

1-3/32”(27mm) 1-29/32”

(48.4mm)

12-7/16”(317mm)

7-1/2”(190.5mm)

1-17/32”(39mm)5/8”

(16mm)15/32”(12mm)

2”(51mm)2-3/4”

(70mm)

9/64”(3.6mm)

3-1/4”(82.5mm)

4-5/8”(117mm)

9/64”(3.6mm)

NOTE:Hole to be Drilled in Shaftat Installation Time

7-55/64”(100mm)

9/64”(3.6mm)

1-15/16”(49mm)

*Replaces:DENT (D-82)

KASON (1230)STANDARD KEIL (2890 & 9183)


SPECIALTY HARDWARE FOR OUTDOOR APPLICATION

hardware designed specifically for outdoor structures

EE6

� NSF Listed � Ideal for highly corrosive and humid environments � Ideal for marine applications, outside cold rooms and commercial refrigerated truck bodies

� Rugged heavy-duty lifetime construction � Tamper-proof designs

A

B

C

D

F

E

W38 SERIES HEAVY-DUTY WALK-IN DOOR SAFETYLATCHES� Available in polished chrome or satin chrome finish � Super heavy-duty construction and large body profile

latch designed to withstand the most rigorous conditions

� Handle is solid forged brass, inner working parts and back plate are solid stainless steel for smooth and rust-free operation INTERCHANGEABLE WITH KASON #56

W99 SERIES HEAVY-DUTY HINGE� Available in chrome plated brass� Available in flush or 5/8” offset� Heavy-duty construction to withstand rigorous conditions

W28 SERIES STAINLESS STEEL INSIDE RELEASEW28-1000 PANIC BAR W/INSIDE RELEASE� Sturdy aluminum construction� Glow-in-the-dark reflective strip

W28-2300-SS STAINLESS STEEL INSIDE RELEASE� For 3" (76 mm) door thickness� Additional sizes for varying door thicknesses available

on application

INTERCHANGEABLE WITH KASON #481

REF. MODEL NO. DESCRIPTION

A W38-1000-C LATCH AND STRIKE

B W99-0100-L LATCH GASKET

C W99-2000 HINGE, CHROME PLATED BRASS

D W99-0100-H HINGE GASKET

E W28-1000 PANIC BAR W/INSIDE RELEASE

F W28-2300-SS STAINLESS STEEL INSIDE RELEASEFOR 3” (76 mm) DOOR THICKNESS

ALSO AVAILABLE AS COMPLETE ASSEMBLIES:

W38-1000-C-GE HEAVY-DUTY LATCH KIT INCLUDES FLUSH MOUNT LATCH WITHCYLINDER, GASKET & INSIDE RELEASE

W38-6000-C-GE WALK-IN LATCH ASSʼY WITH GASKETS,ALUMINUM PANIC BAR W/ S/S INSIDE RELEASE ASSEMBLY

W99-2000-GE HINGE KIT CHROME PLATED BRASS,FLUSH MOUNT W/ GASKETS INCLUDED

W99-2062-GE HINGE KIT CHROME PLATED BRASS,5/8” OFFSET, INCLUDES GASKETS

TM

800-526-3694CONFIDENTIAL CHG 000293

SETTLEMENT MATERIAL

www.chgusa.com

W60 SERIES HINGE - Long StrapSATIN CHROME FINISH

W60-2000 FLUSH

W60-2025 1/4”(6.4mm)

W60-2112 1-1/8”(28.6mm)

W60-2137 1-3/8”(35mm)

W60 SERIES HINGE - Short StrapPOLISHED CHROME FINISH

W60-1000-S FLUSH

W60-1012-S 1/8” (3.2mm)

W60-1025-S 1/4” (6.4mm)

W60-1037-S 3/8” (9.5mm)

MODEL NO. OFFSET

W60-1000 FLUSH

W60-1012 1/8” (3.2mm)

W60-1025 1/4” (6.4mm)

W60-1037 3/8” (9.5mm)

W60-1112 1-1/8” (28.6mm)

W60-1125 1-1/4” (31.8mm)

W60-1137 1-3/8” (35mm)

W60-1150 1-1/2” (38mm)

W60-1162 1-5/8” (41.3mm)

W60-1175 1-3/4” (44.5mm)

W60-1187 1-7/8” (47.6mm)

W60-1200 2” (50.8mm) INTERCHANGEABLE WITH KASON # 1245

AND STANDARD KEIL # 2860

COORDINATED STYLINGDesign coordinated with clean, unobtrusive lines to aesthetically complement the W19 and W38 SERIES Easy Action Safety Latch or other contemporary breaker hardware, latchesor pulls.

REVERSIBLECan be utilized for any right or left hand door application. Conversion is easily accomplished without tools.

UNIQUE CAM ACTIONContains self-lubricating nylon and Delrin cam rise components toprovide GLIDE-ACTION door operation. These components reducedoor sweep gasket wear regardless of floor irregularity and provideconstant overclose pressure against the door gasket assuring a posi-tive seal. A HOLD-OPEN FEATURE is built into the cam allowing thedoor to remain open at 140°. The door will automatically return to aclosed position if opened less than 140°.

LIFT-OFF CAPABILITYDoors can be removed quickly without tools or hinge disassembly. This allows for knockdown shipment and eliminates costly on-siteinstallation and service time.

DURABLEConstructed of die-cast Zamak with built-in structural reinforcing ribsfor extraordinary strength and years of trouble-free operation.

ALL TYPE CONSTRUCTIONThis series is designed to meet the universal requirements of all typesof cooler construction especially foam.

UNIVERSAL MOUNTING HOLESAllows replacement with all competitors models without redrilling orreinforcing.

TM

INTERCHANGEABLE WITH KASON # 1246AND STANDARD KEIL # 2860

W60 SERIES HINGE - Long StrapPOLISHED CHROME FINISH

walk-in door hinge

EE7

W60 SERIES LIFT-OFF HINGE WITH CAM RISE ACTION

� W60 SPECIFICATIONS ON NEXT PAGE


800-526-3694

MODEL NO. W62-0001 Polished Chrome Finish

MODEL NO. W62-2001 Satin Chrome Finish

� ACCELERATES DOOR CLOSING� INCREASES DOOR PRESSURE� EASY INSTALLATION� REDUCED INVENTORY

The energy saving power spring conversion cartridge is designed for easyinstallation into the W60 Series Lift-off Hinge. It provides increased doorspeed closure and maintains constant gasket pressure to eliminate refriger-ated air loss. Unlike competitorʼs spring hinges, this optional cartridge kit canbe simply added at any time to the W60 Series Lift-off Hinge eliminatingcostly inventories.The cartridge kit contains a heavy duty chrome vanadium spring to assure yearsof trouble-free operation. The assembly may be used for either left or righthand doors, permitting reduced inventory for both hinges and conversion kits.When required, the cartridge may be easily disengaged for door removal.

Note: This conversion cartridge eliminates the lift-off capability of the W60SERIES LIFT-OFF HINGE.REPLACES KASON #1248 AND STANDARD-KEIL #2862

EASY INSTALLATION

1-15/16”(49mm)

5-1/2”(140mm)

10”(254mm)

2-7/8”(73mm)

9”(229mm)

W60 SERIESLong Strap

SPECIFICATIONSOFFSET: Flush thru 2”(51mm) FINISH: Polished Chrome or Satin Chrome FinishMATERIAL: High pressure die cast Zamak MOUNTING HOLES: Drilled and countersunk for #14 screws (6mm)

2-7/8”(73mm)

4-7/8” (124mm)

6-7/8” (175mm)

5-1/2”(140mm)

1-15/16”(49mm)

W60 SERIESShort Strap

power spring conversion cartridge kit

EE8

W60 SERIES HINGES

HEAVY-DUTY CAM-RISE HINGE 1-5/8” OFFSET

W77-1625

� For cold storage, supermarket and other heavy-duty walk-in applications

� Reversible for left or right-hand doors without disassembly� Self-closing cam-rise action� Heavy-duty zinc-plated steel strap with satin finish� Black epoxy-coated die cast flange� Drilled for 3/8” mounting hardware� Other offsets available upon application

POWER SPRING CONVERSION CARTRIDGE KIT


www.chgusa.com

W99 SERIES INVESTMENT CAST LATCH ASSEMBLIES

� NSF Listed� The ONLY ALL STAINLESS LATCH available in

todayʼs market� Solid stainless steel (Type 316) construction

throughout� Ideal for highly corrosive and humid environments� Ideal for marine applications, outside cold rooms

and commercial refrigerated truck bodies� Rugged heavy-duty lifetime construction� Tamper-proof design� Padlock feature on all latches for maximum security� Cylinder lock model also available

solid stainless steel investment cast latch assemblies

EE9

2-7/32”(57mm)

9/16”(14mm)

5-11/16”(145mm)

2” (50mm)

3-3/8”(85.7mm)



3-3/16”(81mm)

3-23/32”(94mm)

29/32”(22.9mm)

2-1/2”(63.5mm)

2-1/8”(54mm)

11-5/32”(283mm)

7-1/16”(179mm)

2-3/32”

(53mm)

2-11/16”(68mm)

1-29/32”(48mm)

3-7/32”(82mm)

2-9/32”(57mm)

2-17/32”(57.9mm)

W99 SERIES LATCH


W99-3800-SS LATCH FLUSH TO 3/8” OFFSET

W99-3800-SS-C LATCH WITH LOCK

W99-3805-SS LATCH** 3/8” TO 3/4” OFFSET

W99-3815-SS LATCH 3/4” TO 1-5/8” OFFSET

W99-3815-SS-C LATCH WITH LOCK

W99-3820-SS LATCH 1-5/8” TO 2-1/2” OFFSET

W28-2300-SS INSIDE RELEASE FOR INSIDE RELEASE 3”(76mm) DOOR THICKNESS

W28-2400-SS INSIDE RELEASE FOR INSIDE RELEASE 4”(100mm) DOOR THICKNESS

W28-2413-SS INSIDE RELEASE FORINSIDE RELEASE 4-1/8”(105mm) DOOR THICKNESS

**Non-Stock Item

HOLE PATTERN INTERCHANGEABLE WITH KASON # 56

TM


800-526-3694

solid stainless steel investment cast hinge assemblies

EE10

13-5/8”(387mm)

2-3/8”(60mm)3-7/8”(99mm)

2-21/32”(67mm)

3-7/8”98mm)

1-3/16”(30mm)

4”(102mm)

5/32”(3.9mm)

3-3/16”(81mm)

1-5/8”(41mm)

1-5/8”(41mm)

2-9/32”(58mm)

W99-6015-SS

12-3/32”(344mm)

2-7/8”(73mm)

1-5/8”(41mm)

1-3/4”(44mm)

3-1/2”(89mm)

5-1/16”(128mm)

10-11/32”(263mm)

2-1/2”(64mm) 3-1/4”

(83mm)

2-5/8”(67mm)

1/8”(3mm)

59/64” (23mm)

3-5/8”(92mm)

4-1/16”(103mm)

1-19/32”(40mm)

1-53/64”(46mm)

1-5/16”(33mm)

7/8”(22mm)

4-1/4”(108mm)

1-5/64”(27mm)

2-5/32”(55mm)

W99-4100

� NSF Listed� Field Reversible� The ONLY ALL STAINLESS HINGE available in

todayʼs market� Solid stainless steel (Type 316) construction

throughout� Ideal for highly corrosive and humid environments� Ideal for marine applications, outside cold

rooms and commercial refrigerated truck bodies� Rugged heavy-duty lifetime construction� Tamper-proof design


W99-6015-SS HINGE 1-5/8” (41mm) OFFSET

W99-4100-SSRH HINGE RIGHT HAND FLUSH

W99-4100-SSLH HINGE LEFT HAND FLUSH

W99 SERIES INVESTMENT CAST HINGE ASSEMBLIES

1-23/32”(44mm)

W99-4100 HOLE PATTERN INTERCHANGEABLE WITH KASON 1241.W99-6015-SS HINGE MATCHES DENT D1P HOLE PATTERN.

OTHER OFFSETSAVAILABLE UPONREQUEST.

TM


www.chgusa.com

door closers for walk-in refrigerators & freezers

EE11

� RUGGED CONSTRUCTION

� DEPENDABLE ACTION

� CONTEMPORARY DESIGN

� ECONOMICAL

� Overcomes difficulties experienced in closing a refrigerator or freezer door against the air that compresses inside

� Actually pulls refrigerator or freezer door closed while allowingthe compressed air in the unit to slowly escape, then holds door firmly closed to eliminate loss of refrigerated air

� Where severe temperature and pressure conditions combine to force doors open, responds to the released pressure and immediately recloses the door

� Universal mounting holes, permit easy replacement of competitive models, complete with white snap-on dust cover.

MODEL NO. R55-1010FOR FLUSH DOORS

MODEL NO. R55-1020FOR 1-1/8” (28.5mm) OFFSET DOORS

INTERCHANGEABLE WITH KASON #1093 AND STANDARD-KEIL #2882

4-1/2”(114.3mm)

3”(76mm)

3”(76mm)

2”(50.8mm)

TM

HYDRAULIC DOOR CLOSER FOR WALK-IN REFRIGERATORS

AND FREEZERS

REVERSIBLE SELF-CLOSINGHINGE WITH CAM-RISE

CONSTRUCTION

MODEL NO. W55-0001 OPTIONAL POWER SPRING KIT FOR USEWITH W55/56 HINGES

6”(152.4mm)

3-1/2”(88.9mm)

1-1/4”(31.8mm)

2-1/8”(54mm)

COUNTERSUNKHOLES FOR1/4”(6.4mm) FLATHEADSCREWS-

TYP. 3 PLACES

COUNTERSUNK HOLES

FOR 1/4”(6.4mm) FLATHEAD SCREWS-

TYP. 3 PLACES

2-1/2”(63.5mm)

2”(50 mm)

2-1/2”(63.5mm)

7”(178mm)

1-5/8” (41mm)

A

B

MODEL NO. A B

W55-1000 SHORT FLANGE 1-15/16” 5-5/16”ASSʼY, FLUSH (49.2mm) (135mm)OFFSET

W56-1000 LONG FLANGE 2-1/2” 7-5/16”ASSʼY, FLUSH (63.5mm) (186mm)OFFSET

� Contemporary design and heavy precision die-cast constructionprovides durable, dependable service

� Self-closing, self-lubricating, self-rising cam provides smooth quiet closing action

� Lift-off and reversible non-handed cam design allows for easy field installation

� Special cam design feature provides a hold open dwell at 100° opening to facilitate loading and unloading of cooler

� Available in both long and short strap models� Special satin chrome finish offers years of clean, trouble- free

use while matching related hardware and cooler door coverings� Polished chrome finish available� Optional spring assist cartridge assembly available

for accelerated and positive door closing

FINISH REF.

SATIN ACHROME

SATIN BCHROME

INTERCHANGEABLE WITH KASON MODELS 1255 & 1256

TM


Model No. W95-1010...Flush OffsetModel No. W95-1020...1-1/8”(28.5mm) Offset

Model No. W94-1010...Flush OffsetModel No. W94-1020...1-1/8”(28.5mm) Offset

� SOLID STAINLESS STEEL construction throughout� Concealed Mounting offers clean, tamperproof appearance� Unique cover design provides easy installation� Interchangeability - unique concealed mounting hole pattern

allows Close-Master™ to easily replace all existing modelsin the field

� Cushioned rubber roller and unique spring design offers smooth, quiet, trouble-free operation

� Available in popular flush and 1-1/8” offsets� Close-Master™ permits fast door closure and positive gasket

seal, reducing energy costs

� SOLID STAINLESS STEEL housing mechanism� Powerful gas-loaded hydraulic cylinder provides positive,

smooth door closure� Unique cover design provides for easy installation

and concealed mounting� Cushioned rubber roller and unique spring design offers

smooth, quiet, trouble-free operation� Popular Flush and 1-1/8” oversize hooks � Interchangeability - unique concealed mounting hole pattern

allows Snugger™ to easily replace all existing modelsin the field

W94-1010 and W95-1010 with FLUSH HOOK

REF. W94-1010 W95-1010

1-3/8” 1”(35mm) (25mm)

2-7/16” 1-1/16” (62mm) (27mm)

7-7/16” 4-13/16” (189mm) (122mm)

6-1/2” 3-7/8” (165mm) (98mm)

9-15/16” 7-1/4” (252mm) (184mm)

1” 1”(25mm) (25mm)

3-3/8” 2-3/8”(86mm) (60mm)

A

B

C

D

E

F

G

W95 SERIES

W94 SERIES

door closers for walk-in refrigerators & freezers

EE12

2-1/2”(64mm)

2”(50mm)

3-3/8”(86mm)

3/8”(10mm)1-1/4”

(32mm)

2”(50mm)

1”(25mm)

A B

C

DE

G

F 1-1/8” OFFSET HOOK ASSEMBLY FOR USE WITH

W94 AND W95 SERIES DOOR CLOSER

2” (50mm)

1” (25mm)

1-1/4” (32mm)

1-3/8” (35mm)

3/8” (10mm)

3/8” (10mm)

1-1/4” (32mm)

11/16” (17mm)

2-1/2” (64mm)

7/16” (11mm)

3/8” (10mm)

W94-1010 andW95-1010 WITHFLUSH HOOK

INTERCHANGEABLE WITH KASON 1095 AND DICTATOR S1800 INTERCHANGEABLE WITH KASON 1094 AND DICTATOR V1600

TM

HEAVY-DUTY SPRING ACTION

CLOSE-MASTER™HEAVY-DUTY HYDRAULIC

SNUGGER™

800-526-3694CONFIDENTIAL CHG 000299

SETTLEMENT MATERIAL

www.chgusa.com

This compact unit provides maximum pressure relief venting by usinglightweight, flexible riser flaps that lift with air pressure and return to asealing position by a gravity memory action. Designed for longevitythere are no springs or mechanical components to fatigue or wear out.

� Provides more venting than mostcompetitive models

� Two-way air flow assures instantpressure balance

� Insulated & vermin proof screened openings

� Maintenance free� Easy to install

TM

W86 SERIES PRESSURE RELIEF PORTMODEL NO. VOLTAGE APPLICATION

W86-1010 120V/8 Watts with Heater Freezer



W86-1024-36* 120V/24 Watts with Heater Freezer

W86-2010 Non-Heated Cooler

6-1/2”(165mm)

6-1/2”(165mm)

5-1/2”(140mm)

*WIRE LEADS 36”. INTERCHANGEABLE WITH STANDARD-KEIL SERIES #2786

W86 SERIES FOR WALK-IN COOLERS AND FREEZERS

CLEARANCEHOLES

U.L. FILE #E73857

SPECIFICATIONSMATERIAL: U.L. recognized thermoplasticFINISH: Textured graySCREENING: AluminumGASKETS: Neoprene, closed cellWIRE LEADS: Type SJ, 18” (457mm) Long

DRILLED FOR #10 SCREWS, INSTALLATION REQUIRES A 4-1/2” (114mm) x 4-1/2” (114mm) OPENING.

.25”(6mm)

3 to 4-1/4”(76 to 108mm)

4-7/16”(113mm)

pressure relief port for square cut out / horizontal vent port

EE13

� Heated models provide frost-free operation which is required for allfreezer applications, non-heatedmodels are available for cooler use only

� Economically priced

LR29496


800-526-3694

U.L. FILE #E73857

� Heated vents prevent freeze-ups and reduce cooler condensation

� Two way valve unit allows air flow in dual directions,compensates for expansion and contraction duringrefrigeration cycles

� Supplied in 120V or 220V Models

W88 SERIES PRESSURE RELIEF PORTMODEL NO. VOLTAGE APPLICATION

W88-1010 120V/23 Watts with Heater FREEZER

W88-1012 220V/23 Watts with Heater FREEZER

W88-2010 Non-Heated COOLER

INTERCHANGEABLE WITH KASON MODEL #1830 & 1834

pressure relief port for round cut out

EE14

LR29496

4”(101mm)

3-1/2-3-5/8”(89-92mm)

DIA.OPENING

5” (127mm)

5”(127mm)

HOLE FOR #8 FLATHEADSELF TAPPING SCREW(4mm) (NOT INCLUDED)

4-5/16”(110mm)

B.C.

SPECIFICATIONSMATERIAL: All AluminumINTERNAL SLEEVE: Lexan, Self-extinguishingFINISH: Textured AluminumELECTRICAL REQUIREMENTS: 120V or 220V Specify voltage requirements. 4”(100mm) standard size wall thickness. When ordering specify other wall thickness.Drilled for No. 8 (4mm) screws

HORIZONTAL VENT PORTMODEL NO. W85-1000

MIN4-9/16”

(116 mm)MAX

5-1/4”(133mm)

1-7/8”(48mm)

5-78”(149mm)

2-1/4”(57mm)

3/16”

MAX4-1/8”(105mm)

3-11/16”(369mm)

� Narrow profile permits mounting of the vent port in the door jamb above the door

� Silicone flaps are used to equalize the atmosphere pressure in walk-in coolers and freezers

� Reliable resistor heating technology prevents flapsfrom freezing

� Reduces the effort required to open refrigerator doors

� Housing is constructed of rugged grey ABS plastic

� ABS housing is UL flame retardant rated 94-5V

� Red indicator light warns if unit stops functioning

� Two part construction permits use on door widths from 3-5/8” to 4-1/4”

� Economical

� Energy Efficient

W88 SERIES FOR WALK-INREFRIGERATORS AND FREEZERS

U.L. FILE #E73857

MODEL NO. W85-1000


www.chgusa.com

MODEL NO. W27-7300 LOCKING HOOK

panel fasteners for cold room construction

EE15

� Interchangeable for use on existing foaming jigs and adapters

� Special guide ribs are built in the female housing which direct the hook to an on-center position

� Offers reliable repeat service and performance� Large diameter foam holes ensure positive foam integrity

W27 SERIES COMPACT FOAMED-IN-PLACE

W27-7300LOCKING

HOOKASSEMBLY

3-3/32”(79 mm)

5-5/32”(137 mm)

1-15/16”(49 mm)

1-11/16”(43 mm)

1-19/32”(40 mm)

1-1/4”(32mm)

1-3/8” (35 mm)

W27-7400STRIKE

ASSEMBLY

29/64”(11.5 mm)

5 ”(127 mm)

27/64”(10.7 mm)

INTERCHANGEABLE WITH KASON 1173

MODEL NO. W27-7400STRIKE

� Friction drive allows hook to slice through foam, locates the female locking pin in mating panel and tightens, providing a positive panel seal

� Zinc plated construction eliminates corrosion concerns and improves mastic adhesion

� Compact construction, superior strength, heavy gauge� Interchangeability of panels

TM


800-526-3694

W27 SERIES FOAMED-IN-PLACE, DUAL ACCESS DESIGN

MODEL NO. W27-8800TTTWIN TUNNEL

LOCKING HOOK



EE16

� Unique Twin Tunnel design provides access to either panel side

� Provides a positive panel seal� Interchangeable-for use on existing foaming jigs and

adapters� Friction drive allows hook to slice through foam,

locates the female locking pin in mating paneland tightens

� Heavy gauge, superior strength� Economical� Zinc plated construction eliminates corrosion

concerns and improves mastic adhesion� Standard flush and extended “Twin-Tunnel” cams

available� Plastic tunnel cap included at no extra charge� Wide fastener wings enhance pull-out strength� Large diameter foam flow holes ensure positive

foam integrity� Adapters: W27-8803 for Hook and W27-8804 for pin.

TM

5/16” (8 mm)

9/16” (14 mm)

2-7/16”(62 mm)

3-21/32”(93 mm)

5-5/16”(135 mm)

1-7/8”(48 mm)

1-5/16”(33 mm)

25/64”(9.9 mm)

11/39”(9 mm)

2-23/32”

(69 mm)

1-23/32”(69 mm)

5-1/16”(129 mm)


W27-8800TTLOCKING

HOOKASSEMBLY

W27-8801STRIKE

MODEL NO. W27-8800TT-SSTWIN TUNNEL

LOCKING HOOK

MODEL NO. W27-8801-SSSTRIKE


MODEL NO. W27-6904LOCKING HOOK



EE17

W27 SERIES EXTENDED FOAMED-IN-PLACE DESIGN

TM

� Ideal for OVERSIZE warehouse foam panels� Extended housing provides greater anchor

assurance� Wide wing design ensures stronger pull-out

strength and integrity� Provides a positive panel seal� Interchangeable for use on existing foaming

jigs and adapters� Heavy gauge superior strength� Friction drive allows hook to slice through foam,

locates the female locking pin in mating panel and tightens

� Economical� Zinc plated construction eliminates corrosion

concerns and improves mastic adhesion� Wide fastener wings enhance pull-out strength� Large diameter foam flow holes ensure positive

foam integrity� Adapters available. Order as W27-6901 for hook

and W27-6902 for pin.

W27-6904LOCKING HOOK

ASSEMBLY

W27-6908STRIKE

5-1/8”(130 mm)

5-1/4”(133 mm)

7/16”(11 mm)1”

(25 mm)

1-1/4”(32 mm)

4-3/4”(121 mm)

4-3/4”(121 mm)

2-3/8”(60 mm)

2-1/4”(57 mm)


www.chgusa.comCONFIDENTIAL CHG 000304

SETTLEMENT MATERIAL

800-526-3694

SLAB FOAM ABS BLOCKPANEL FASTENERS

with FOAM INSULATED BACKING

MODEL NO. W27-5304For Gasketed 4” (102mm) Panels


REF. A

W27 SERIES SLAB FOAM ABS BLOCK

W27-5204 FOR GASKETED PANELS


W27-5104FOR NON-GASKETED PANELS


� Unbreakable ABS housing, zinc plated heavy gauge steel hook and pin� Permanently attached hook and strike insures integrity and can be activated time and time again

� For use with 2”(50mm), 4”(102mm) and 6”(152mm) panels� Economical

SLAB FOAM ABS BLOCKPANEL FASTENERS

MODEL NO. W27-5104* *For Non-Gasketed 4” (102mm) Panels

MODEL NO. W27-5204 For Gasketed 4” (102mm) Panels


EE18

15/32”(12mm)

3-25/32”(96mm)

1-1/2”(38mm)

1-1/2”(38mm)

3-25/32”(96mm)

29/64”(12mm)

1-1/2”(38mm)

1-1/2”(38mm)

3-25/32”(96mm)

3-25/32”(96mm)

15/32”(12mm)

23/64”(9mm)

TM

REF. B

A

B

C

W27-5202FOR GASKETED PANELS

SLAB FOAM ABS BLOCK PANEL FASTENERS


REF. C

2-5/8”(67mm)

(PUSH FIT) .250 X 1.75 LONGZP-STEEL PIN

1-7/8”(47.63mm)

5-1/2”(139.7mm)


W27 SERIES WOOD FRAME AND METAL FRAME

INTERCHANGEABLE WITH KASON 1156A AND 1156B

MODEL NO. W27-5600A & W27-5600B

LOCKING HOOK

33/64”(13mm)

2-9/64”(54mm)

W27-5600A & W27-5600BLOCKING HOOK

� Zinc plated� Ideal for wood, high density rail or metal frame construction� Stamped holes provided for easy mounting with staple, screw or nails � Heavy-duty steel housing� Assorted offset strike assemblies or strike pins available� Economical


EE19

MODEL NO. “A” OFFSET

W27-5543 7/16”(11mm)

W27-5550 1/2”(13mm)

W27-5562 5/8”(16mm)

W27-5568 11/16”(17mm)

W27-5575 3/4”(19mm)

W27-5581 13/16”(21mm)

W27-55112 1-1/8”(29mm)

REF. C #W27-5501 PIN, SHORT

3-1/4”(82mm) x 1/4”(6mm) DIA.INTERCHANGEABLE WITH KASON 1156-36

#W27-5502 PIN, LONG 4-3/4”(120mm) x 1/4”(6mm) DIA.

REF. A REF. B W27-55--LOCKING STRIKE

“A” OFFSET

A

B

C

MODEL NO. X Y

W27-5600A 1-7/16” 1-31/32”(37mm) (50mm)

W27-5600B 1-7/16” 2-11/32”(37mm) (60mm)

SEE CHARTABOVE

3-3/4”(95mm)

X

Y

33/64”(13mm)

1-41/64”(42mm)

2-9/64”(54mm)

3/16” (5mm) MOUNTINGHOLE DIA.

3/16”(5mm) DIA. MTG. HOLESINTERCHANGEABLE WITH KASON 1155

MODEL NO.W27-55 SERIES LOCKING STRIKE

TM

www.chgusa.comCONFIDENTIAL CHG 000306

SETTLEMENT MATERIAL

800-526-3694

ECONOMICAL LOW PROFILE COOLER-FREEZER LIGHT FIXTURES

fluorescent cooler/freezer light fixtures

EE20

TM

#E240378

MODEL NO. LAMPS

(2EA.) F32T8

(2EA.) F54T5HO

VOLTAGE

UNV= 120 -277V, 50-60 Hz

� Energy efficient high power factor T-5 HO and T-8 electronic ballasts reduce operating costs and power consumption

� Light fixtures generate less heat, reducing the cost to maintain low operating temperatures� Universal ballasts operate at -20°F (30°C) for freezer applications� Resilient, one piece silicone gasket rated IP-65 for damp and wet locations� Superior highly-polished German alanod reflector improves light output � Corrosion free high impact polycarbonate housing � Clear, high impact polycarbonate lens � Supplied with NEC approved luminaire disconnects� Provided with stainless steel mounting hardware and European Type PG-16 conduit connector

Ref. A

Ref. A

CFL-48U32X2T8

CFL-36U54X2T5

SIZE

48” Housing

48” Housing

C US

LAMPS NOT PROVIDED

6-3/4”(171.7mm)

4”(101mm)

50-9/16”(1285mm)

36”(914.4mm)

Mounting Centers7/8”

Knock out on both ends


www.chgusa.com

VXS SERIES SURFACE MOUNT INCANDESCENT

REFRIGERATION LIGHTING FIXTURE

SPECIFICATIONSFIXTURE BODY: Die cast aluminumJUNCTION BOX: Die cast aluminum

SOCKET: Porcelain body with copper shellWATTAGE: Accepts standard 100 watt A19 bulb

(not furnished)VOLTAGE: Rated up to120 voltsGASKETS: Cork and composition fibre

GLOBE: Clear limeglass or plastic silicone coated limeglass or impact resistant polycarbonate material

WIRE GUARD: Plated steelOVERALL SIZE: 4-1/4”(108mm) diameter, 9-1/4”(235mm)

long with wire guardCONDUIT ENTRY: 1/2” NPS (4) side openings and (1) top

opening. Threaded metal plugs are providedfor openings not being utilize

� U.L. LISTED...“suitable for damp locations”� C.S.A. Certification listing...“enclosed and gasketed”� N.S.F. COMPONENT LISTING

DESCRIPTION

LISTED#E80045

VXS-100-GL

VXS-100-PX(NSF LISTED)

VXS-100-PC(NSF LISTED)

VXS-100-GL-WG

VXS-100-PX-WG

VXS-CSA-GL

VXS-CSA-PX

VXS-CSA-PC

VXS-CSA-GL-WG

VXS-CSA-PX-WG

FURNISHED W/ GLASS GLOBE

FURNISHED W/ PLASTIC COATEDGLASS GLOBE

FURNISHED W/ POLYCARBONATE GLOBE

FURNISHED W/ GLASS GLOBE AND WIRE GUARD

FURNISHED W/ PLASTIC COATED GLASS GLOBE AND WIRE GUARD

U.L.MODEL NO.

CSAMODEL NO.

INTERCHANGEABLE WITH KASON #1802, 1803, AND 1804

VXS SERIES LIGHTING FIXTUREREPLACEMENT PARTS

PORCELAIN SOCKETCOMPLETE WITH COPPER SHELL

MODEL NO. L10-X026 (REF. A)

JUNCTION BOX ASSEMBLY COMPLETE WITH LAMP

HOUSING MODEL NO. L10-Y010 (REF. B)

LAMP HOUSINGCOMPLETE WITH PORCELAIN

SOCKET AND REQUIRED GASKETS

MODEL NO. L10-Y016 (REF. C)

JUNCTION BOX COMPLETE WITH(4) 1/2” NPS CONDUIT OPENINGS

AND THREADED PLUGSMODEL NO. L10-Y005 (REF. D)

WIRE GUARDMODEL NO. L10-X020 (REF. E)

GLOBE, POLYCARBONATE PLASTIC

MODEL NO. L10-X008 (REF. F)

GLOBE, PLASTIC SILICONE COATED GLASS

MODEL NO. L10-X007 (REF. G)

GLOBE, CLEAR LIME GLASSMODEL NO. L10-X006 (REF. H)

C

D

GF

E

A B

H

incandescent refrigeration light fixture

TM

TM

EE21CONFIDENTIAL CHG 000308

SETTLEMENT MATERIAL

EE22

� NSF Listed � UL Listed� Tempered, triple-pane, moisture proof clear glass

viewing area� airspace between glass panels now Argon filled in

non-heated models to comply with the Energy Independence Act of 2007

� Fully welded, PVC framing provides positiveinsulation barrier eliminating heat transfer and surface sweating, unlike metal frame styles

� Brushed aluminum frame matches stainless door panels� Helps prevent accidents during employee

ingress and egress� Heated glass provides clean and dry visibility,

both from within and outside cold rooms � SAFE-T-VU™ prevents potential lock-ins and

criminal behavior� Perfect for both cooler and freezer applications� Designed for 4-inch thick doors� Optional 6-inch models available, on special application � Available from stock

MODEL NO.

W90-1414-3AG*W90-1414-4AGW90-1414-4G**

W90-1414-3HA*W90-1414-4HA

W90-1424-3AG*W90-1424-4AGW90-1424-6AG*

W90-1424-3HA*W90-1424-4HAW90-1424-6HA*

DESCRIPTION

NON-HEATED

HEATED

NON-HEATED

HEATED

O.A. SIZE

17-3/16”(436mm)x 17-3/16”(436mm)

17-3/16”(436mm)x 17-3/16”(436mm)

17-3/16”(436mm)x 27-3/16”(690mm)

17-3/16”(436mm)x 27-3/16”(690mm)

CUT-OUTREQUIREMENT

16-1/4”(413mm)x 16-1/4”(413mm)

16-1/4”(413mm)x 16-1/4”(413mm)

16-1/4”(413mm)x 26-1/4”(667mm)

16-1/4”(413mm)x 26-1/4”(667mm)

WATTAGE

-

20

-

35

VOLTAGE

-

115

-

115

™

E-T-VUE-TT-VE-TSAFEAFEEAA

safe-t-vu™ window port

SAFE-T-VU™WINDOW VIEWPORTS

WITH ALUMINUM COVER FOR WALK-IN COOLER AND

FREEZER APPLICATIONS- AVAILABLE HEATED AND NON-HEATED

OVERALL

CU

TO

UT

RE

QU

IRE

ME

NT

OV

ER

ALL

4-1/4”(108mm) -3-1/2”(88mm)

ADHESIVE MOUNTING TAPE

46”(1168mm) 2 WIRE CORD

1/8” (3mm) FLANGE THICKNESS

*3-inch and 6-inch widths are non-stock. **NOTE: Viewports available without aluminum frame on special application.50 piece minimum order. Eight week lead times.

800-526-3694

E73857

TM


www.chgusa.com

HEX WRENCH

MODEL NO. W27-0001-CMODEL NO. W27-0001-SL

Hex wrench with rubber sleeve (not shown)

� 6” (152mm) x 6” (152mm) � Hardened steel

� For use with W27 series panel fastener� Readily replaces competitors wrench

SNAP-ON MOULDING

� Stainless steel� Ideal for use as a back-up plate

for gaskets around door jam

MODEL NO. WIDTHJ60-2200* 3/8” (10mm)

J60-2220* 1/2” (13mm)

J60-2240 3/4” (19mm)

J60-2260 1” (25mm)

J60-2270 1-1/4” (32mm)

J60-2280* 1-1/2” (38mm)

J60-2320* 2” (51mm)

12 FT. (3657mm) LENGTHS*NON-STOCK ITEM AVAILABLE ON APPLICATIONSPECIAL LENGTHS AVAILABLE UPON REQUEST

SNAP-IN FINISHING CAP

MODEL NO. W27-0002-C

� 3/4" diameter� Grey polyethylene

� For use with W27 series panel fastener� Covers wrench holes for clean appearance

UNIVERSALPANEL FASTENER

ADAPTERS � For foam-in-place application

� Readily replaces all competitorʼs adapterswith same mounting holes

� Hardened Steel and Electroplated

� Adapters available for ALL Foamed-in-Place Fasteners

� Competitive pricing

accessories for walk-in refrigeration & freezers

ACCESSORIES FOR WALK-IN REFRIGERATION & FREEZERS

REF. A

REF. B

REF. C

REF. D

C

A

B

D

TM

EE23CONFIDENTIAL CHG 000310

SETTLEMENT MATERIAL

NUMERICAL INDEX

CFL-48U32X2T8.............EE20CFL-36U54X2T5.............EE20J60-2200.........................EE23J60-2220.........................EE23J60-2240.........................EE23J60-2260.........................EE23J60-2270.........................EE23J60-2280.........................EE23J60-2320.........................EE23L10-X006........................EE21L10-X007........................EE21L10-X008........................EE21L10-X020........................EE21L10-X026........................EE21L10-Y005........................EE21L10-Y010........................EE21L10-Y016........................EE21R55-1010........................EE11R55-1020........................EE11VXS-100-GL................... EE21VXS-100-GL-WG............EE21VXS-100-PC...................EE21VXS-100-PX................... EE21VXS-100-PX-WG............EE21VXS-CSA-GL..................EE21VXS-CSA-GL-WG...........EE21VXS-CSA-PC..................EE21VXS-CSA-PX..................EE21VXS-CSA-PX-WG...........EE21W19-1000 ....................... E E 2W19-1000-C ................... E E 2W19-1000-SN ................. E E 2W19-1000-C-SN ............. E E 2W19-1500 ....................... E E 2W19-1500-C .................... E E 2W19-1500-SN ................. E E 2W19-1500-C-SN ............. E E 2W19-2000 ....................... E E 2W19-2000-C .................... E E 2W19-2000-SN ................. E E 2W19-2000-C-SN ............. E E 2W27-0001-C....................EE23W27-0001-SL..................EE23W27-0002-C................... EE23W27-5104.......................EE18W27-5202.......................EE18W27-5204.......................EE18W27-5304.......................EE18W27-5306.......................EE17W27-5501.......................EE19W27-5502.......................EE19W27-55112..................... EE19W27-5543.......................EE19W27-5550....................... EE19W27-5562....................... EE19W27-5568....................... EE19W27-5575....................... EE19W27-5581....................... EE19W27-5600A.....................EE19W27-5600B.....................EE19W27-6901........................EE17W27-6902........................EE17W27-6904....................... EE17W27-6908....................... EE17W27-7300....................... EE15W27-7400....................... EE15

MODEL NO. PAGE NO. MODEL NO. PAGE NO. MODEL NO. PAGE NO.

W77-1625 ...................... E - E 8W85-1000....................... EE14W86-1010....................... EE13W86-1012...................... EE13W86-1020....................... EE13W86-1024-36.................. EE13W86-2010....................... EE13W88-1010....................... EE14W88-1012....................... EE14W88-2010....................... EE14W90-1414-3AG............... EE22W90-1414-4AG............... EE22W90-1414-4G................. EE22W90-1414-3HA............... EE22W90-1414-4HA............... EE22W90-1424-3AG............... EE22W90-1424-4AG............... EE22W90-1424-6AG............... EE22W90-1424-3HA............... EE22W90-1424-4HA............... EE22W90-1424-6HA............... EE22W94-1010........................EE12W94-1020........................EE12W95-1010........................EE12W95-1020........................EE12W99-0100-H......................EE6W99-0100-L......................E E 6W99-2000......................... E E 6W99-2000-GE.................. E E 6W99-2062-GE.................. E E 6W99-3800-SS.................. E E 9W99-3800-SS-C.............. EE9W99-3805-SS.................. E E 9W99-3815-SS.................. E E 9W99-3815-SS-C.............. EE9W99-3820-SS.................. EE9W99-4100-SSRH ........... EE10W99-4100-SSLH ............ EE10W99-6015-SS.................. EE10

W27-8801....................... EE16W27-8801-SS................ EE16W27-8800TT.................. EE16W27-8800TT-SS..............EE16W27-8803........................EE16W27-8804........................EE16W28-1000........................ EE6W28-2300-SS...........EE6, EE9W28-2325....................... . EE3W28-2400....................... . EE3W28-2400-SS...........EE3, EE9W28-2413-SS.................. EE9W28-2600. ........................EE3W28-2605......................... EE3W28-2800......................... EE3W28-3400......................... EE2W28-3800....................... . EE2W29-1000......................... EE4W29-1000-C..................... EE4W29-2000......................... EE4W29-2000-C..................... EE4W29-5000-4..................... EE4W29-Y005-C.................... EE4W29-X003-6 .................. . EE4W31-1000........................ EE5W31-1000-C......................EE5W38-1000........................ EE3W38-1000-C.............EE3, EE6W38-1000-C-GE ............. EE6W38-1000-SN ................. EE3W38-1000-C-SN ............. EE3W38-1500........................ EE3W38-1500-C.................... EE3W38-1500-SN................. . EE3W38-1500-C-SN............. . EE3W38-2000........................ EE3W38-2000-C.................... EE3W38-2000-SN ................. EE3W38-2000-C-SN ............. EE3W38-6000-C-GE ............. EE6W50-1000........................ EE5W55-0001........................EE11W55-1000........................EE11W56-1000........................EE11W60-1000........................ EE7W60-1000-S..................... EE7W60-1012......................... EE7W60-1012-S..................... EE7W60-1025......................... EE7W60-1025-S..................... EE7W60-1037........................ EE7W60-1037-S..................... EE7W60-1112 ........................ EE7W60-1125 ....................... EE7W60-1137 ....................... EE7W60-1150 ....................... EE7W60-1162 ....................... EE7W60-1175 ....................... EE7W60-1187 ....................... EE7W60-1200 ....................... EE7W60-2000 ....................... EE7W60-2025 ....................... EE7W60-2112 ....................... EE7W60-2137 ....................... EE7W62-0001....................... EE8W62-2001....................... EE8


confidential chg 000285 settlement materialclassaction.kccllc.net/documents/kir0001/walk-in...1890...

Documents