configuring a wireless access point made simple. o the first step was figuring out which devices i...
TRANSCRIPT
LTEC 4550.020 Network SystemsAssignment 2
Mark A. Ventura
Configuring A Wireless Access Point
Made Simple
Wireless Access PointStep-By-Step Procedure
o The first step was figuring out which devices I wanted to use for the connections
o The devices I chose are:
o Dell Latitude 620 Laptopo Mobile (WIFI) Hot Spot from ISP (Internet Service Provider)o USB cable (doubles as a power charger)
o Ensuring the laptop and the WIFI Hot Spot were both charged, I connected both devices using the USB cable provided by the ISP
o Then, following the instructions provided by the ISP for “Quick Setup” I turned on the Mobile Hot Spot allowing the device to “boot up”
o The Mobile Hotspot has an automatic configuration wizard to simplify the process and it prompted me to provide a pass code
o The configuration wizard then enabled the laptop to connect wirelessly
o I could then disconnect the USB cable from the laptop and the Hot Spot
o As long as the Mobile Hot Spot is on, the laptop automatically connects to the internet
Wireless Access Configuration
Initial Connection Made by USB
Wireless WIFI Hot Spot
Laptop
ISP