connect - metalstampi · 15/48/15 ba-bs • 27/48/27 ba-bs product manufactured out of galvanized...

CONNECT

CONNECTSTEEL

CONNECTING SYSTEMS

1Compliance with CE marking mandated by law on the product, as per European standard EN 13964 (determination of maximum load for suspended ceilings with load-bearing capacity).

2Marking test carried out with the complete kit of Metalstampi profiles and accessories (greater guarantee on the allowed load-bearing values).

3Products manufactured according to the highest standards of quality (precision in the steel cold-forming processes and in the combination of different materials).

4Products may be custom-manufactured upon request (brackets, hooks).

5Personalized packaging with label on the box and bar code.

CONNECT STEEL 6

7 CONNECT STEEL

STRAIGHT CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector is fastened to the primary metal framing with a horizontal rotating motion, positioning the product inside the C of the channel.

Description Dimensions and thickness mm

Kgper pkg.

Application Sales Unit

001/P100 BA089/P100 BS

straight connector with through hole Ø 5

t 1 2.90 suspended ceiling 100 pcs1 pkg.

C/15/48/15

C/27/48/27

BA BS

CONNECT STEEL 8

axonometric viewscale 1:2


front viewscale 1:2

side viewscale 1:2

SPRING CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of tempered galvanized steel 0.7 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector is fastened to the primary metal framing with a horizontal rotating motion, positioning the product inside the C of the channel.


Kgper pkg.


002/P100 BA090/P100 BS

spring connector spring t 0.7connector t 1

3.70 suspended ceiling 100 pcs1 pkg.

C/15/48/15

C/27/48/27

BA BS

9 CONNECT STEEL



front viewscale 1:2

side viewscale 1:2

ORTHOGONAL CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of galvanized steel 0.7 mm and 0.8 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double-frame suspended ceilings. The connector is fastened to the secondary metal framing with a horizontal rotating motion, positioning the product inside the C of the channel; it locks onto the primary framing by crimping the end of the accessory.


Kgper pkg.


006/P100 BA067/P100 BS

orthogonal connector

d 15t 0.8


C/15/48/15

BA BS

007/P100 BA057/P100 BS

orthogonal connector

d 27t 0.7


C/27/48/27

BA BS

CONNECT STEEL 10





front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

CLICK-ON ORTHOGONAL CONNECTOR27/48/27 BA-BSProduct manufactured out of galvanized steel 0.8 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double-structure suspended ceilings. The connector is fastened to the secondary metal framing with a horizontal rotating motion, positioning the product inside the C of the channel; it locks onto the primary framing by crimping the end of the accessory.


Kgper pkg.


113/P100 BA114/P100 BS

click-on orthogonal connector

d 27t 0.8


C/27/48/27

BA BS

11 CONNECT STEEL



front viewscale 1:2

side viewscale 1:2

LONGITUDINAL JOINT15/48/15 • 27/48/27Product manufactured out of galvanized steel 0.6 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings and/or double walls to join channels with the same section. The joint is slipped into the metal framing by pressing the product against the metal stud.


Kgper pkg.


008/P100 longitudinal joint d 15t 0.6

3.20 suspended ceilingdouble wall

100 pcs1 pkg.

C/15/48/15



100 pcs1 pkg.

C/27/48/27

CONNECT STEEL 12



front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

SPACER CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings and/or double walls, with a 5 mm spacing between metal framing member and wall. The connector is slipped into the metal framing by pressing the product against the metal stud.


Kgper pkg.


035/P100 BA056/P100 BS

spacer connector with Ø M6 threaded hole

d 5t 1


100 pcs1 pkg.

C/15/48/15

C/27/48/27

BA BS

091/P100 BA092/P100 BS

spacer connector with through hole Ø 7

d 5t 1


100 pcs1 pkg.

C/15/48/15

BA BS

13 CONNECT STEEL





front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

VIBRALESS SPACER CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings and/or double walls, with a 12 mm spacing between metal framing member and wall. The Vibraless system, which features a polymer-based membrane in compliance with the UNI EN ISO 1873-1 standards, mechanically separates the accessory from the adjustment nut, thereby dissipating the mechanical energy generated by sources of noise. The connector is slipped into the metal framing by pressing the product against the metal stud.


Kgper pkg.


036/P100 BA058/P100 BS

Vibraless spacer connector with Ø M6 threaded hole

d 12t 1


100 pcs1 pkg.

C/15/48/15

C/27/48/27

BA BS

CONNECT STEEL 14



front viewscale 1:2

side viewscale 1:2

SPACER CONNECTOR15/48/15 BA-BS • 27/48/27 BA-BSProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings, with a spacing of 20/25/30/35 mm between metal framing member and wall. The connector is slipped into the metal framing by pressing the product against the metal stud.


Kgper pkg.


101/P100 BA105/P100 BS

spacer connector with through holed 20

d 20t 1

3.90 double wall 100 pcs1 pkg.

C/15/48/15

C/27/48/27

BA BS

15 CONNECT STEEL



front viewscale 1:2

side viewscale 1:2


Kgper pkg.


102/P100 BA106/P100 BS


d 25t 1


C/15/48/15

C/27/48/27

BA BS

103/P100 BA107/P100 BS


d 30t 1


C/15/48/15

C/27/48/27

BA BS

CONNECT STEEL 16





front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2


Kgper pkg.


104/P100 BA108/P100 BS


d 35t 1


C/15/48/15

C/27/48/27

BA BS

17 CONNECT STEEL



front viewscale 1:2

side viewscale 1:2

SCREW CONNECTOR, NUT, PLUGProduct manufactured out of galvanized steel and polypropylene 6-8 mm thick in compliance with UNI EN ISO 4032:2002, UNI EN ISO 4026:2005 and UNI EN ISO 1873-1:1998 standards for the construction of double walls. They are used as supports to screw in the spacer connector with the threaded hole. The galvanized nut serves to fasten the spacer connector tightly to the screw connector.


Kgper pkg.


Screw connectors double wall 100 pcs1 pkg.

059/P100 6x70 d 70 1.20

013/P100 6x90 d 90 1.51

014/P100 6x110 d 110 1.84

088/P100 galvanized nut Ø M6 d Ø 6 0.30 double wall 100 pcs1 pkg.


Kgper pkg.


016/P100 universal plugØ 8x50

d 8x50 0.20 double wall 100 pcs1 pkg.

CONNECT STEEL 18




side viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

MULTIFIX FASTENING CONNECTOR27/48/27 BAProduct manufactured out of galvanized steel 1.8 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings and/or double walls. The accessory is attached to the flange of the beam and held in place by the blocking screw and the serrated edge of the product. The metal framing is slipped in by pressing the product against the metal stud.


Kgper pkg.


127/P100 BA multifix fastening connector

t 1.8 5.80 suspended ceilingdouble wall

100 pcs1 pkg.

C/27/48/27

assonometriascala 1:2

vista frontalescala 1:2

vista lateralescala 1:2

MAX 15

327

48

35

M6

1.8

35

ANCHORING CLIP FOR BEAMSProduct manufactured out of tempered galvanized steel 1.2 mm thick in compliance with EN 10132-4 standards, to be used in the construction of suspended ceilings. The accessory is clipped to the flange of the beam and held in place by compression.


Kgper pkg.


anchoring clip for beams

t 1.2 suspended ceiling 100 pcs1 pkg.

121/P100 thickness 2-3 0.70

122/P100 thickness 3-7 1.60

123/P100 thickness 8-13 1.90

124/P100 thickness 14-20 1.90

19 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2


front viewscale 1:2

side viewscale 1:2

ADJUSTABLE UNIVERSAL BRACKET - 50 mmProduct manufactured out of galvanized steel 0.9 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls, with a spacing 35/65/95 mm between the wall and the base of the metal framing member. The bracket may be screwed onto the studs of the metal framing system using structural screws.


Kgper pkg.


adjustable universal bracket

t 0.9 double wall 100 pcs1 pkg.

037/P100 50x35 d 50x35 4.20

038/P100 50x65 d 50x65 5.50

068/P100 50x95 d 50x95 6.50

CONNECT STEEL 20


front viewscale 1:2

side viewscale 1:2

ADJUSTABLE BRACKET - 50x120 mmProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls and suspended ceilings, with a spacing of 30 mm to 120 mm between the base of the metal stud and the wall. The bracket may be screwed in the required position onto the members of the metal framing using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall.


Kgper pkg.


126/P100 adjustable bracket 50x120

d 50x120t 1


100 pcs1 pkg.

21 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

BRACKET 48x50-100-150-200 mmProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls and suspended ceilings, with a spacing of 50 mm to 200 mm between the base of the metal stud and the wall. The bracket may be screwed in the required position onto the members of the metal framing using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall.


Kgper pkg.


adjustable bracket with through hole Ø 7

t 1 suspended ceilingdouble wall

260/P050 48x50 2.62 50 pcs1 pkg.

261/P050 48x100 4.17 50 pcs1 pkg.

262/P020 48x150 2.55 20 pcs1 pkg.

263/P020 48x200 3.31 20 pcs1 pkg.

custom lengths available upon request

CONNECT STEEL 22


front viewscale 1:2

side viewscale 1:2

L-BRACKETProduct manufactured out of galvanized steel 0.8 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls, with a spacing of 60 mm to 120 mm between the base of the metal stud and the wall. The bracket may be screwed onto the members of the metal framing using structural screws.


Kgper pkg.


010/P100 L-bracket 60x35 d 60x35t 0.8


069/P100 L-bracket 120x35 d 120x35t 1


23 CONNECT STEEL



front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

U-SHAPED SPRING CONNECTOR40/28/40Product manufactured out of tempered galvanized steel 0.7 mm thick in compliance with EN 10132-4 standards, and out of galvanized steel 1.2 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector is fastened to the primary metal framing with a horizontal rotating motion, positioning the product inside the U of the metal stud along with the adjustable hook.


Kgper pkg.


033/P100 spring connector for click-on profiles U/40/28/40 b=24

b=24spring t 0.7connector t 1.2


U/40/28/40

081/P100 spring connector for click-on profiles U/40/28/40 b=19

b=19spring t 0.7connector t 1.2


U/40/28/40

CONNECT STEEL 24



front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

U-SHAPED HANGER WITH SPRINGProduct manufactured out of tempered galvanized steel 0.8 mm thick in compliance with EN 10132-4 standards, and out of galvanized steel wire 3.9 mm thick in compliance with UNI EN 10025, to be used in the construction of suspended ceilings. The connector is hooked onto the primary metal framing, positioning the product inside the U of the metal framing member.


Kgper pkg.


U-shaped hanger with spring

hanger Ø 3.9spring t 0.8


144/P100 U/40/20/40

162/P100 U/40/28/40

25 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

LONGITUDINAL JOINT40/28/40Product manufactured out of galvanized steel 0.7 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings to connect steel framing members with the same section. The connector snaps into the primary metal framing by pressing the product against the metal stud.


Kgper pkg.


125/P100 longitudinal jointfor click-on profilesU/40/28/40

t 0.7 3.70 suspended ceiling 100 pcs1 pkg.

U/40/28/40

CONNECT STEEL 26


front viewscale 1:2

side viewscale 1:2

BRACKET 30x50-100-150-200 mmProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls and suspended ceilings, with a spacing of 50 mm to 200 mm between the base of the metal stud and the wall. The bracket may be screwed in the required position onto the members of the metal framing using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall.


Kgper pkg.


adjustable bracket with through hole Ø 7

t 1 suspended ceilingdouble wall

270/P050 30x50 2.27 50 pcs1 pkg.

271/P050 30x100 3.77 50 pcs1 pkg.

272/P020 30x150 2.37 20 pcs1 pkg.

273/P020 30x200 3.15 20 pcs1 pkg.


27 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

STRAIGHT SLIDING CONNECTORT/38/24Product manufactured out of galvanized steel 1.5 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector slides into the primary metal framing, placing the product on the T of the metal stud.


Kgper pkg.


065/P100 straight sliding connector with through hole Ø 5for visible T/38/24 load-bearing structures


T/38/24

CONNECT STEEL 28


front viewscale 1:2

side viewscale 1:2

SLIDING SPRING CONNECTORT/38/24Product manufactured out of tempered galvanized steel 0.7 mm thick in compliance with EN 10132-4 standards, and out of galvanized steel 1.5 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector slides into the members of the metal framing, placing the product on the T of the metal stud.


Kgper pkg.


066/P100 sliding spring connector for visible T/38/24 load-bearing structures

spring t 0.7connector t 1.5


T/38/24

29 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

V-SHAPED HANGER WITH SPRINGProduct manufactured out of tempered galvanized steel 0.8 mm thick in compliance with EN 10132-4 standards, and out of galvanized steel wire 4 mm thick in compliance with UNI EN 10025, to be used in the construction of suspended ceilings. The connector is hooked onto the primary metal framing, inserting the product inside the T of the metal stud.


Kgper pkg.


145/P100 V-shaped hanger with spring

hanger Ø 3.9spring t 0.8


T/38/24

CONNECT STEEL 30


front viewscale 1:2

side viewscale 1:2

ANCHORING CLIP PAINTED WHITE FOR T/38/24Product manufactured out of tempered galvanized steel 1 mm thick in compliance with EN 10132-4 standards, with the surface coated in epoxy powder paint, RAL 9016, with or without a self-locking tab and vertical eyelet with a Ø 6mm hole, to be used for hanging loads in structures built with T/38/24. The clip is inserted by rotation into the lower part of the T/38/24 structure.


Kgper pkg.


190/P100 white self-locking anchoring clipfor T/38/24


191/P100 white anchoring clipfor T/38/24


31 CONNECT STEEL



front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

SPRING CONNECTOR27/60/27Product manufactured out of tempered galvanized steel 0.7 mm thick in compliance with EN 10132-4 standards, and out of galvanized steel 0.9 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The connector is inserted into the primary metal framing with a vertical rotating motion, positioning the product inside the C of the metal stud.


Kgper pkg.


061/P100 connector with spring connector t 1.5spring t 0.7


C/27/60/27

CONNECT STEEL 32


front viewscale 1:2

side viewscale 1:2

LONGITUDINAL JOINT27/60/27Product manufactured out of galvanized steel 0.6 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings and/or double walls to connect steel framing members with the same section. The connector slips into the primary metal framing by pressing the product against the metal stud.


Kgper pkg.




100 pcs1 pkg.

C/27/60/27

33 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

ORTHOGONAL CONNECTOR27/60/27Product manufactured out of galvanized steel 0.8 and 0.9 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double-frame suspended ceilings. The connector is inserted into the primary metal framing with a vertical rotating motion, positioning the product inside the C of the metal stud; it locks onto the primary framing by crimping the end of the accessory.


Kgper pkg.


062/P100 orthogonal connector C/27/60/27with base


C/27/60/27

062/P100/B orthogonal connector C/27/60/27without base


C/27/60/27

CONNECT STEEL 34



front viewscale 1:2

front viewscale 1:2

side viewscale 1:2

side viewscale 1:2

CLICK-ON ORTHOGONAL CONNECTOR27/48/27 BA-BSProduct manufactured out of galvanized steel 0.8 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double-frame suspended ceilings. The connector is slipped into the secondary metal framing, locking it into the primary metal framing, by pressing the product against the metal stud.


Kgper pkg.


062/P100/A click-on orthogonal connector


C/27/60/27

35 CONNECT STEEL


front viewscale 1:2

side viewscale 1:2

ADJUSTABLE BRACKETProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of double walls, with a spacing of 30 mm to 120 mm between the base of the metal stud and the wall. The bracket may be screwed at the required position onto the members of the metal framing using structural screws. The excess length of the bracket may be repositioned by turning the ends towards the inner part of the wall.


Kgper pkg.


064/P100 adjustable bracket60x120

d 60x120t 1

5.80 suspended ceiling double wall

100 pcs1 pkg.

C/27/60/27

CONNECT STEEL 36


front viewscale 1:2

side viewscale 1:2

SLOTTED RULEProduct manufactured out of galvanized steel 1 mm thick in compliance with EN 10143 and EN 10346 standards, to be used in the construction of suspended ceilings. The accessory is fastened onto the straight connector with a galvanized flanged nut and bolt [code 015/P100] to adjust it to the desired height, and connect it to the metal framing; it may be fastened to the floor slab with a metal plug after the product has been prepared for fastening in the required shape.


Kgper pkg.


011/P010 slotted rule d 17x3000t 1


SCREW + NUTProduct manufactured out of galvanized steel, M5 screw threading as per UNI EN ISO 4032:2002 and UNI EN ISO 4026:2005 standards to be used for the construction of suspended ceilings. It provides a rigid connection between the straight connector and the slotted rule. The particular milling on the screw and nut texture the surface to prevent slipping and unscrewing.


Kgper pkg.


015/P100 screw + galvanized flanged nuts Ø 5x12for straight connectors

d x Ø 5x12 0.50 suspended ceiling 10 pcs1 pkg.

37 CONNECT STEEL


plan viewscale 1:2

side viewscale 1:2


side viewscale 1:2

DOUBLE SPRINGProduct manufactured out of tempered galvanized steel 0.7 mm thick in compliance with EN 10132-4 standards, to be used in the construction of suspended ceilings. The accessory is connected by slipping it onto two hangers, of the various types available.


Kgper pkg.


039/P100 adjustment spring for double hangerØ 3.9


FLAT EYELET HANGER Ø3.9Product manufactured out of galvanized steel wire 3.9 mm thick in compliance with EN 10025 standards, to be used in the construction of suspended ceilings. The accessory is fastened by slipping it onto the spring connector to adjust to the desired height; whereas it may be fastened to the floor slab with a metal plug inserted into the eyelet with an internal diameter of 6.5 mm.


Kgper pkg.


flat eyelet hangerØ 3.9

suspended ceiling 100 pcs1 pkg.

040/P100 d 125 1.60

017/P100 d 250 2.80

041/P100 d 375 4.10

018/P100 d 500 5.30

042/P100 d 750 7.00

019/P100 d 1000 10.40

043/P100 d 1500 15.30

044/P100 d 2000 20.40

149/P100 d 3000 30.50

151/P100 d 4000 40.80


CONNECT STEEL 38

side viewscale 1:2


front viewscale 1:2

side viewscale 1:2

FLAT HANGER Ø3.9Product manufactured out of galvanized steel wire 3.9 mm thick in compliance with EN 10025 standards, to be used in the construction of suspended ceilings. The accessory is fastened by slipping it onto the spring connector to adjust the height as required; whereas it may be fastened to the floor slab with a metal plug, after shaping the wire into the required form.


Kgper pkg.


flat hanger Ø 3.9


155/P100 d 125 1.60

156/P100 d 250 2.80

157/P100 d 375 4.10

158/P100 d 500 5.30

159/P100 d 750 7.00

146/P100 d 1000 10.40

160/P100 d 1500 15.30

147/P100 d 2000 20.40

148/P100 d 3000 30.50

161/P100 d 4000 40.80


39 CONNECT STEEL

side viewscale 1:2

HANGER Ø3.9 BENT 90°Product manufactured out of galvanized steel wire 3.9 mm thick in compliance with EN 10025 standards, to be used in the construction of suspended ceilings. The accessory is fastened by slipping it onto the spring connector to adjust the height as required; whereas it may be fastened to the floor slab with a metal plug inserted into the eyelet with an internal diameter of 6.5 mm.


Kgper pkg.


90° bent hangerØ 3.9


128/P100 d 125 1.60

129/P100 d 250 2.80

130/P100 d 375 4.10

131/P100 d 500 5.30

132/P100 d 750 7.00

133/P100 d 1000 10.40

134/P100 d 1500 15.30

135/P100 d 2000 20.40

150/P100 d 3000 30.50

152/P100 d 4000 40.80


CONNECT STEEL 40

front viewscale 1:2

side viewscale 1:2

HANGER Ø3.9 V-SHAPEDProduct manufactured out of galvanized steel wire 3.9 mm thick in compliance with EN 10025 standards, to be used in the construction of suspended ceilings. The accessory is fastened by hooking it onto the T structures and slipping it into the double springs to adjust to the desired height; it may be fastened to the floor slab with a metal plug inserted into the desired type of hanger.


Kgper pkg.


V-shaped hanger Ø 3.9


136/P100 d 125 1.60

137/P100 d 250 2.80

138/P100 d 375 4.10

139/P100 d 500 5.30

140/P100 d 750 7.00

141/P100 d 1000 10.40

142/P100 d 1500 15.30

143/P100 d 2000 20.40

153/P100 d 3000 30.50

154/P100 d 4000 40.80


41 CONNECT STEEL

side viewscale 1:2

HANGER Ø 3.9 U-SHAPEDProduct manufactured out of galvanized steel wire 3.9 mm thick in compliance with EN 10025 standards, to be used in the construction of suspended ceilings. The accessory is fastened by hooking it onto the T structures and slipping it into the double springs to adjust to the desired height; whereas it may be fastened to the floor slab with a metal plug inserted into the desired type of hanger.


Kgper pkg.


8-mm U-shaped hanger Ø 3.9


163/P100 d 125 1.60

164/P100 d 250 2.80

165/P100 d 375 4.10

166/P100 d 500 5.30

167/P100 d 750 7.00

168/P100 d 1000 10.40

169/P100 d 1500 15.30

170/P100 d 2000 20.40

171/P100 d 3000 30.50

172/P100 d 4000 40.80


CONNECT STEEL 42

side viewscale 1:2


Kgper pkg.


15 mm U-shaped hangerØ 3.9


173/P100 d 125 1.60

174/P100 d 250 2.80

175/P100 d 375 4.10

176/P100 d 500 5.30

177/P100 d 750 7.00

178/P100 d 1000 10.40

179/P100 d 1500 15.30

180/P100 d 2000 20.40

181/P100 d 3000 30.50

182/P100 d 4000 40.80


43 CONNECT STEEL

side viewscale 1:2

IMPORTANT RECOMMENDATIONS FOR USING AND STORING PRODUCTS

CE MarkingPlease note that each product is part of a hanging/connection kit, to connect to the upper anchoring system and to the supporting element in dry construction systems for use inside buildings. The various components are identified in the catalogue and price list with the CE logo.

Each product has a Declaration of Performance (DOP).

Fire rating: class A1.

Durability: class B (Components of a building exposed to variable relative humidity up to 90% and to variable temperatures up to 30°C but with no exposure to corrosive pollution agents, except for products in class C5-M).

Recommendations for storing metal framing elementsStore packages in a covered area with a relatively dry atmosphere and as constant a temperature as possible, to avoid condensation that could consume the passivation coat protecting the galvanized surface.In case of outdoor storage (discouraged), please cover so as to ensure perfect protection of the material against adverse weather conditions (rain, fog, snow), making sure to store the packages in a slightly inclined position. The cover must however ensure sufficient airflow (the two surfaces must not be in direct contact) so that moisture does not settle and create condensation.

connect - metalstampi · 15/48/15 ba-bs • 27/48/27 ba-bs product manufactured out of galvanized...

Documents