connection catalog

is a division of ELETTROMEDIA62018 Potenza Picena (MC) Italy - Tel. +39 0733 870 870 - Fax +39 0733 870 880 - www.elettromedia.it

Connection... Interconnections to reveal every musical detail.

Speaker cables, power cables and distribution accessories for the extreme current demands of your

high power system.

Connection was designed using only the best available materials. Audison’s top level engineering team’s

most advanced technologies were employed to produce every single component.

Three performance / price levels to satisfy the needs of any enthusiast, competitor or reference audiophile.

When unparalleled quality and uncompromising reliability are not choices, they are requirements…

Connection from Audison… The Power Transfer System.

Power & Ground Cable ................................................ 02Speaker Cable ........................................................... 04Signal Cable .............................................................. 08Audio Interconnect ...................................................... 09Video Interconnect ...................................................... 14Fuse ......................................................................... 15Fuse Holder................................................................ 16Fuse Distribution ......................................................... 18Distribution Block........................................................ 19Fuse & Distribution System ........................................... 20Battery Clamp ............................................................ 22Battery Terminal .......................................................... 24Ring Terminal ............................................................. 25Ground Terminal ......................................................... 26Main Crimp ................................................................ 27Heatshrink Sheath ...................................................... 27Superfarad ................................................................ 28Power Kit .................................................................. 30Amplifier Kit ............................................................... 31Technical Notes .......................................................... 32

FUSE HOLDER, WATERPROOF = Product descriptionThe name usually consists of the above noted designations depending on theproduct type: Power Cable, Speaker Cable, Signal Cable, Interconnections andAccessories.Fuse Holders, Fuse Distribution and Distribution Systems do not include fuses.

WarrantyAll the products in this price list are guaranteed according to the terms oflaw. Potentially defective products must be returned to an authorized Connection dealer for repair or replacement.Products damages due to misuse are not covered by this warranty.

NotesElettromedia is an ISO 9001:2000 certified company. All of its research anddevelopment activities are carried out in compliance with the reference norm.

Elettromedia carries on an intense research and development process, aimedat the continued improvement of its products. Because of this philosophy, continuous adoption of new materials and technology may lead to productchanges without notice.

Technical features, aesthetics and prices of Elettromedia products may be different from the ones indicated in this price list.

Elettromedia does not assume any responsibility for the direct or indirectdamages due to eventual product modifications or changes.

Product Model DesignationExample: SFH 11 WP - Fuse Holder, Waterproof

MAINPOWER

Pow

er &

Ground C

able

• SOFT TOUCHTM jacket to enhance the feel and flexibility • BLUE & SILVER translucent matte finish jacket for enhanced cosmetics• RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 • 6+1 STRAND MULTIPLE TWIST TECHNOLOGY, for instantaneous high current responseand to minimize eddy current power losses

• 30% MORE wire content than any competitor• X3 FLEXIBLE for “REFERENCE” installations

29,00

29,00

18,70

18,70

10,80

10,80

5,20

5,20

0,73

€

3,10

€

MAINPOWER SERVICE

• 3 CONDUCTORS: 2 x 14 AWG power and ground conductors, 1x16 AWG remote turn-on wire

• ALL IN ONE wire bundle for easy, time saving installation• SOFT TOUCHTM jacket to enhance the feel and flexibility • BLUE & SILVER translucent matte finish jacket for enhanced cosmetics• RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88• CONVENIENT for powering processors and accessories

MP1/0BL

MP PGI

MP1/0S

2

MAINPOWER CABLES FOR INSTANTANEOUS HIGH CURRENT TRANSFER

POWER FLOW

Pow

er &

Ground C

able

13,30

13,30

7,60

7,60

3,70

3,70

2,30

2,30

€

• SOFT TOUCHTM jacket to enhance the feel and flexibility• RED & BLACK translucent matte finish jacket for “…the look”• RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88• SEVEN STRAND MULTIPLE TWIST construction, for high power transfer and to reducevoltage losses

• X2 FLEXIBLE for “COMPETITION” installations

POWER FLOW CABLES FOR HIGH POWER TRANSFER

PF 2BK

PF 2R

3

S

Speaker C

able

8,60

5,70

3,30

€

5,00

4,90

4,80

€

• SOFT TOUCHTM jacket to enhance the feel and flexibility• BLUE & SILVER translucent matte finish jacket for enhanced cosmetics• RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88• TMTCTM TEXTILE MULTIPLE TWIST CONFIGURATION, 8 linear strands wound in a textile configuration. Hear a huge sound stage, pinpoint imaging and faithful reproduction of every inner nuance

• PRECIOUS METAL treated wire • X3 FLEXIBLE for “REFERENCE” installations

“Y-BOOT” Translucent blue termination

• For clean installations

S 210

S 212

S 214

4

“S” SERIES REFERENCE AUDIOPHILE SPEAKER CABLES

ULTRA FLAT

SILVER

Speaker C

able

4,80

3,00

1,93

€

3,10

2,24

1,51

1,03

€

• SILVER TRANSPARENT finish jacket• ZERO GRIP JACKET for easy installation• MULTIPLE BRAIDED WIRE TECHNOLOGY, flat profile, easily concealed under carpet inany tight location

• LARGE SURFACE for better power transfer• X2 FLEXIBLE & FLAT for “IMPOSSIBLE” installations

“ULTRA FLAT” SERIES COMPETITION GRADE SPEAKER CABLES

“SILVER” SERIES HIGH RESOLUTION, COMPETITION SPEAKER CABLES

• SOFT TOUCHTM jacket to enhance the feel and flexibility

• SILVER translucent matte finish• TWO OR FOUR conductors available• RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88• MULTIPLE TWIST WINDING CONFIGURATION, seven silver finished strand constructionfor detailed musicality and high power transfer

• X3 FLEXIBLE for “PROFESSIONAL” installations

SL 212

SL 214

SL 216

SL 218

UF 212 UF 214

UF 216

5

Speaker C

able

4,20

€

2,05

2,05

2,05

€

FLASH

• HIGHLY TRANSPARENT jacket to enhance look• THREE COLOR CHOICES: blue, yellow or orange for “flashy”installations

• ZERO GRIP JACKET for easy installation• MULTIPLE TWIST WINDING CONFIGURATION for enhancedmusic reproduction

• X2 FLEXIBLE for “HIGH VALUE” installations

“FLASH” SERIES PROFESSIONAL SPEAKER CABLES

SL 414

6

SILVER

FL 214 O

FL 214 Y

FL 214 BL

FT

1,75

1,15

€

BASIC1

• CLEAR / BLUE HIGHLY TRANSPARENT jacket to enhance look• ZERO GRIP JACKET for easy installation• MULTIPLE WIRE WINDING configuration for improved music reproduction• X1 FLEXIBLE for “STANDARD” installations

“BASIC1” SERIES HIGH VALUE SPEAKER CABLES

0,73

€

Speaker C

able

FT 214

FT 216

B18

7

• CLEAR, HIGHLY TRANSPARENT jacket to enhance look• ZERO GRIP JACKET for easy installation• MULTIPLE TWIST WINDING CONFIGURATION for enhanced music reproduction• X2 FLEXIBLE for “HIGH VALUE” installations

“FT” SERIES PROFESSIONAL SPEAKER CABLES

Signal Cable

SB

• STEREO BALANCED OR UNBALANCED: it can be used in either configuration• BRAIDED TRUE SILVER COATED outer shield for increased noise rejection• 110% TWISTED MYLAR AND ALUMINIUM shield rejects RFI and EMI• POLYAMIDE POLYMER protective inner jacket for true silver coated conductors• WTPTM Winding Twisted Pair balanced conductors reject low frequency electro-magnetic fields aiding in noise rejection

• DDWTM Double Drain Wire system to drain electrostatic fields. No noise• THE ULTIMATE signal cable for “REFERENCE” installations

“SB” REFERENCE AUDIOPHILE SIGNAL CABLE (SPOOL)

12,70

€

8

SB 20

ST2

• DURA-TEXTM outer jacket for protection and to enhance the feel and flexibility• SOFT TOUCHTM outer jacket makes for an extremely flexible cable• 110% TWISTED MYLAR AND ALUMINIUM shield rejects RFI and EMI• TEXTILE COTTON INTERNAL FIBERS protect silver finished conductors• DDWTM Double Drain Wire system to drain electrostatic fields. No noise• WTPTM Winding Twisted Pair balanced conductors reject low frequency electro-magnetic fields aiding in noise rejection

• OVER 80 dB noise rejection• PLATINUM SATIN machined ABSTM style connector for a strong long lasting connection• TUG-PROOF sealed internal connection for maximum reliability• DIE-CAST Y BLOCK for full protection of the conductors in the critical split point• “REFERENCE GRADE” performance

“ST” SERIES HIGH RESOLUTION AUDIOPHILE SIGNAL CABLES

29,00

33,00

52,00

70,00

79,00

€

Audio Interconnect

ST Y ADAPTER

27,00

27,00

€

STF 030

9

BT2

• 2-4-6 CHANNELS available• SOFT TOUCHTM translucent, matteblue jacket makes for an extremelyflexible cable

• POLYAMIDE POLYMER outer jacketprotects inner conductors

• WTPTM Winding Twisted Pair balanced conductors reject low frequency electro-magnetic fields aiding in noise rejection

• OVER 60 dB noise rejection• CHROME SAT IN ABS TM s t y l e machined metal contacts

• TUG-PROOF sea led i n terna lconnection for maximum reliability

• MOLDED Y BLOCK for protection of the conductors in the critical split point

• “COMPETITION GRADE” performance

13,00

14,00

15,00

16,00

17,90

18,80

€

Audio Interconnect

BT4

28,00

31,00

32,00

€

10

“BT” SERIES HIGH EFFICIENCYSIGNAL CABLES

BT Y ADAPTER

Audio Interconnect

11

9,90

9,90

€

BT6

42,00

45,00

€

BTF 030

FT2

5,60

6,60

7,50

8,40

9,00

10,00

€

Audio Interconnect

• HIGHLY TRANSPARENT clear outer jacket forenhanced cosmetics

• BALANCED twisted pair, silver finished conductorsenhance noise rejection

• 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability

• RIGHT ANGLE CONNECTOR on one end to aidin tough installations

• TUG-PROOF sealed internal connection for maximum reliability

• “PROFESSIONAL GRADE” performance


“FT” SERIES HIGH VALUE SIGNAL CABLES

FT Y ADAPTER

4,10

4,10

€

12

FTF 030

FS2

• SOFT TOUCHTM translucent, matte blue jacketmakes for a flexible cable

• UCSTM LOW NOISE SHIELD for improved noise rejection

• 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability

• TUG-PROOF sealed internal connection for maximum reliability

• EXTENDED REMOTE TURN-ON WIRE to “power up” connected components

• “VALUE GRADE” performance

4,70

5,60

7,50

8,40

€

Audio Interconnect

FS Y ADAPTER

3,90

3,90

€

“FS” SERIES HIGH VALUE SIGNAL CABLES

13


FSF 030

BV1

Video Interconnect

• SGIDTM Special Gas Injected Dielectric• 75 Ohm constant impedance• SOFT TOUCHTM outer jacket• Braided true silver coated outer shield for increased noise rejection

• Silver coated central conductors for improved frequency response

• CHROME SATIN machined metal contacts• Injection molded compact body for reliable performance

23,00

27,00

31,00

€

14

15

SFA

• PLATINUM SATIN AFS fuse for use on all Connection fuse systems

• CONVENIENT transparent casing for easy condition verification

• CONNECTION monogram molded into casing for great cosmetics

• 15 A thru 300 A values available

4,70

4,70

4,70

4,70

4,70

4,70

4,70

4,70

4,70

€

Fuse

SFH

Fuse H

older

• COMPLETELY WATERPROOF POLYCARBONATE CRYSTALS casing • 4 AWG thru 1/0 AWG inputs for any current demand• SMBTM solid machined brass construction for better current transfer

• PLATINUM SATIN finish for unparalleled cosmetic appeal• KNURLED SCREWS for better contact with the attached wire• AFS FUSE 15 A thru 300 A available

35,00

€

BFH

• POLYCARBONATE CRYSTALS casing, strong and scratch resistant

• 4 AWG thru 1/0 AWG inputs for any current demand • SMBTM solid machined brass construction for better current transfer

• CHROME SATIN finish for enhanced cosmetics• KNURLED SCREWS for better contact with the attached wire

• RECESSED inset cable collar for protection against “stray” wire strands

• AFS FUSE 15 A thru 300 A available

27,00

€

16

SFH 11WP

BFH 11

17

FFH 14 Mini ANL line

• POLYCARBONATE casing, strong and scratch resistant

• 4 AWG inputs for high current demand• CHROME SATIN f in ish for enhanced cosmetics

• AFS FUSE 15 A thru 300 A available

FFH

Fuse H

old

er

9,00

€

FFH 14

18

FFH Mini-ANL line


Fuse H

olders


• 4 AWG inputs for high current demand• SMBTM solid machined brass construction for better current transfer

• CHROME SATIN finish for enhanced cosmetics• AFS FUSE 15 A thru 300 A available

BFD

Fuse D

istribution

• POLYCARBONATE CRYSTALS casing, strong and scratch resistant• 4 AWG thru 1/0 AWG inputs for any current demand• SMBTM solid machined brass construction for better current transfer• CHROME SATIN finish for enhanced cosmetics• KNURLED SCREWS for better contact with the attached wire• RECESSED inset cable collar for protection against “stray” wire strands• TWO AND FOUR POSITION AFS 15 A thru 300 A fused outputs available

28,00

€

39,00

€

BFD 21

BFD 41

19

FFH Mini-ANL line


Fuse H

olders


• 4 AWG inputs for high current demand• SMBTM solid machined brass construction for better current transfer

• CHROME SATIN finish for enhanced cosmetics• AFS FUSE 15 A thru 300 A available

BDB

Distribution B

lock

FDB

• POLYCARBONATE casing, strong and scratch resistant• 8 AWG thru 4 AWG inputs for high current demand• SMBTM solid machined brass construction for better current transfer

• CHROME SATIN finish for enhanced cosmetics• RECESSED inset cable collar for protection against “stray” wire strands

9,00

€

26,00

€

36,00

€

• POLYCARBONATE casing, strong and scratch resistant• 8 AWG thru 1/0 AWG inputs for any current demand• SMBTM solid machined brass construction for better current transfer• CHROME SATIN finish for enhanced cosmetics• KNURLED SCREWS for better contact with the attached wire• RECESSED inset cable collar for protection against “stray” wire strands• TWO CONVENIENT SIZES: 5 positions and 11 positions

BDB 51BDB 111

20

SFD

• UNIQUE ONE PIECE fuse and ground system for clean, reliable installations


• 1/0 AWG on both fused and ground input, 1/0 AWG pass thru on fused block

• SMBTM solid machined brass construction for better current transfer

• PLATINUM SATIN finish for unparalleled cosmetic appeal

• KNURLED SCREWS for better contact with the attached wire

• RECESSED inset cable collarfor protection against “stray” wire strands

• MOLDED CABLE REST keeps wires safe and nicely laid out

• 1 – 2 AWG and 3 – 4 AWG on both AFS fused and ground outputs

66,00

€

Fuse & D

istribution S

ystem

SFD 41C

21

Fuse & D

istribution S

ystem

17,90

€

11,00

€

BDB 44

BDB 24

11,80

€

BFH & BDB System

• PROPRIETARY MODULAR fuse and ground distribution system

• “ADD-ON” distribution capability grows with yoursystem upgrades

• EXTENSION LINKS provided with each BFH 14, BDB 24 and BDB 44


• 4 AWG input and output on both AFS fused and ground modules




BFH 14

22

SBC

19,80

19,80

€

Battery C

lam

p

BBC

• UNIQUE AFS FUSED POSITIVE post battery clamp, 15 A thru 300 A available


• WRAP AROUND “clamp” design for a tight, reliable connection




26,00

€

BBC 41P


• SEPARATE POSITIVE AND NEGATIVE post designs for better fit


• SMBTM solid machined brass construction for bettercurrent transfer

• PLATINUM SATIN finish for unparalleled cosmetic appeal• KNURLED SCREWS for better contact with the attached wire


23

FBC


• SEPARATE POSITIVE AND NEGATIVE post designsfor better fit


• RING TERMINAL connection and 2 – 8 AWG outputs for flexible system design


• CHROME SATIN finish for enhanced cosmetics

10,80

10,80

€

Battery C

lam

p

24

FBT

• EXTENSION POST for side post batteries• SHORT AND LONG designs for maximum flexibility • SRT AND FRT RING TERMINALS are a perfect companion


4,70

€

5,00

€

Battery T

erm

inal

25

SRT

• REFERENCE ring terminal with stylized Connection sheath

• 1/0 AWG, 2 AWG and 4 AWG input sizes available• SMBTM solid machined brass construction for better current transfer


• TRANSLUCENT connector boot with Connectionmonogram included

• PLATINUM SATIN finish for unparalleled cosmetic appeal

16,90

17,90

19,80

€

3,60

3,70

5,30

6,00

€

Ring T

erm

inal

FRT LINE

• CRIMP OR SOLDER TYPE ring terminal • 2, 4, 8 and 10 AWG input sizes available• BLUE & SILVER connector jackets for safety and cosmetic appeal included


26

SGT

• LARGE FOOTPRINT for better groundon high power systems

• 1/0 AWG input for high current systems• SMBTM solid machined brass constructionfor better current transfer

• PLATINUM SATIN finish with Connectionmonogram

7,50

€

Ground T

erm

inal

BGT

• LARGE FOOTPRINT for better ground on high power systems

• 2 AWG input for high current systems• SMBTM solid machined brass constructionfor better current transfer

• CHROME SATIN finish with Connection monogram

6,60

€

SGT 11

BGT 21

27

SMC

• THE ULTIMATE cable termination • 1/0, 2, 4, 8 and 10 AWG sizes available• PROVIDES unparalleled contact between cable and chosen connector

• MORE contact area = MORE current transfer = MORE POWER

• PREVENTS “stray” wire strands shorting out for safety and reliability

• SILVER FINISHED copper construction

4,70

4,70

4,70

4,70

4,70

€

Main C

rim

p

SHS

• RADIATED FLAME-PROOF POLYOLEFIN • RESISTANT to high temperature conditions

• APPLIED HEAT provides a “suction” e f fec t around the wrapped connection point

• PROV IDES PROTECT ION for term inated w ires assur i ng safety and rel iab i l i ty

2,70

2,70

2,70

2,70

€

Heatshrink S

heath

228

BSF

• 20 VOLT DESIGN for high current capability

• X3 - LOW ESR for bettercurrent transfer < 1,5 mΩ

• WIDE TEMPERATURE RANGEfor constant performance

• ANTI-VIBRATION DESIGN forimproved reliability

• ELECTROLYTE RESERVE forlong lasting capability

• Tolerance ±2%

80,00

115,00

€

Superfa

rad

BSF 13 BSF 13

229

BCA

30,00

€

Superfa

rad

• CAPACITOR DISTRIBUTION for power and ground

• SMBTM solid machined brass constructionfor better current transfer

• H IGH CURRENT – LOW RES ISTANCE connection for better current transfer

• UPGRADE WITH BCA DGT digital voltage readout for BCA 32

• SIMPLIFIED INSTALLATION… MAXIMUM PERFORMANCE

35,00

€

17,00

€

BCA 32

BCA 14

BCA DGT

30

FPK

• 5,2 m/17 ft. transparent blue power cable

• FFH fuse holder• AFS fuse included• 1 m/3.3 ft. transparent silver ground cable

• 5,2 m/17 ft. 18 AWG blue remote turn-on cable

• 1,5 m/5 ft. of split loom• All required ring and fork terminals included

• Cable ties, split loom and snap grommet included

Installation Kit for the properpower hook-up of a single amplifier up to 300 or 600 watts

45,00

29,00

€

Pow

er K

it

31

FSK

Am

plifier K

it

• 5,2 m/17 ft. transparent blue power cable• FFH fuse holder• 60 A AFS fuse included• 1 m/3.3 ft. transparent silver ground cable• 5,2 m/17 ft. 18 AWG blue remote turn-on cable• 10 m/33 ft. FT 216, 16 AWG speaker cable• 5 m/16.5 ft. FT2 500 audio interconnect • 1,5 m/5 ft. of split loom• All required ring and fork terminals included• Cable ties, split loom and snap grommet included

Installation Kit for the complete proper hook-up of a single amplifier up to300 watts

42,00

€

SISTEMA CONNECTION PER MOBILE MULTIMEDIA

32/33

Technical Notes

10137010

connection catalog

Documents