connectors jumper cables emp & grounding cable … · web: . sales office. ordering products...

CONNECTORS • JUMPER CABLES

EMP & GROUNDING • CABLE CLAMPS

POWER SPLITTERS & TAPPERS

COMBINERS • ABSORBERS • REPEATERS

ACTIVE DAS • PASSIVE DAS • ANTENNAS

3Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com

While all efforts have been made to provide accurate specifications at time of printing, Leax Arkivator Telecom AB is not responsible for any errors or omissions in this catalogue. All specifications are subject to change without prior notice and neither Leax Arkivator Telecom AB nor its employees may be held responsible for discrepancies between the printed specifications and those actually in effect at any given time. Please check actual specifications at www.leax-arkivator-telecom.com before ordering.

© Leax Arkivator Telecom AB, SwedenAll rights reserved. 2016 Leax Arkivator Telecom AB.

INFO & ORDER: [email protected]

WEB: www.leax-arkivator-telecom.com

SALES OFFICE

Ordering products from Leax Arkivator Telecom is easy. Orders can be placed directly via telephone or e-mail.

Visit Leax Arkivator Telecom´s website for updated product specifications, mounting descriptions and much more.

Leax Arkivator Telecom AB

Stridsvagnsvägen 14

SE-291 39 Kristianstad, Sweden

PHONE: +46 (0) 8 752 02 20

CONTENTS INTRODUCTION

CONNECTORS

FEEDER CABLE

JUMPER CABLES

EMP & GROUNDING

CABLE CLAMPS

PASSIVES

COMBINERS

REPEATERS

REPEATER ANTENNAS

INDOOR ANTENNAS

4 Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com

LEAX Arkivator Telecom AB is a global technology supplier servicing the coaxial and RF industry in both the broadcasting and telecom sectors. Our focus is to develop and manufacture the most innovative, dependable and long-lasting products on the market.

Building on tradition At LEAX Arkivator Telecom, our focus is on the development and manu-

facture of innovative, long-lasting RF products offering superior reli-

ability and performance at a reasonable price for the worldwide market.

Previously Teracom Components, we became Exir Telecom in 2008

after becoming part of the Exir Group. Though the brand names are

new, our products continue to be built with experience and tradition

stretching back to the first RF infrastructures to be built in Sweden.

Today our position on the worldwide market continues to grow stronger

thanks to the extensive production knowledge and manufacturing ca-

pacity available to us as part of the Exir / Arkivator Group now owned

by the LEAX Group.

Where new ideas come first LEAX Arkivator telecom invests heavily in time and costs the develop-

ment of new ideas and products that will improve the quality and reliabil-

ity of the world’s telecom systems. An excellent example is the first ever

easy-to-use, single piece connector that we introduced back in 1998, an

innovation that revolutionized the market. By studying problems on-site

together with installers, our experienced R&D engineers excel at develop-

ing products that simplify installation, improve performance and enhance

overall system reliability.

Our PhilosophyModern communication places great demands on the systems that pro-

cess the information being exchanged throughout the world. It goes

without saying that these systems must be built with reliable products.

When developing new technology it is of the utmost importance to un-

derstand how this technology will be integrated into our everyday lives.

And to understand this, we must be close to the people who use it. It is

from this perspective that we view evolving technologies. We stay close

to our customers, the universities, the technicians using our products,

and to those using our customers’ own innovations on a daily basis. Only

with a clear understanding of the ultimate aim of the technology can we

build the finest quality products available.

Trusted around the worldAt LEAX Arkivator Telecom we work together with major international

operators, system suppliers and cable manufacturers who have used our

products ever since the telecom boom. These companies trust the per-

formance our products deliver, and we are dedicated to maintaining their

confidence while creating new, high quality products. The single piece

connector and our market leading built-in weatherproofing system are

examples of designs that save telecom customers money while provid-

ing long-term system stability.

Leax Arkivator Telecom

Introduction and General Information


Having been around since long before the dawn of modern tele-communications, The Exir Telecom brand offers the benefit of far-reaching experience and in-depth knowledge.

As a customer you can benefit from our knowledge of sourcing and manufacturing within the telecoms sector. LEAX Arkivator Telecom offers the chance to establish a channel for service, good quality and cost saving solutions.

Unbeatable quality and advantages with Exir Telecom branded components.

Unrivalled Industry knowledge with LEAX Arkivator Telecom products.


AT CABLE ENTRY

O-ring at cable entry prevents water leakage between

connector and plastic cable jacket.

BETWEEN CONNECTOR’S FRONT AND BACK PIECES

O-ring to prevent moisture migration during installation.

AROUND OUTER COPPER TUBE

Double O-rings prevent leakage between connector

and outer conductor.

INSIDE THE CONNECTOR HEAD

A leaking antenna can cause damage throughout the

system. O-rings at the connector head stop such

water leakage and protect the rest of the system

from further damage.

SILVER-PLATED CONTACT SURFACES

All contact surfaces are silver-plated to achieve

maximum conductivity.

VIBRATION RESISTANT CONSTRUCTION

The double O-rings sealing the outer conductor

provide added stability to protect against the

wear otherwise caused by cable vibrations.

HIGH CONTACT PRESSURE ON OUTER CONDUCTOR

The connector’s mechanical construction allows great

pressure to be applied to the area of contact with the

cable’s outer conductor when tightened around the

cable. A specially designed slot keeps the outer

conductor of the cable in place.

Design Features for Preventing Intermodulation

O-Ring Sealing for Guaranteed Water Protection

1

1 3

2 4

3

2

31 2

1 432

Reliable Connector Design


HOW WE STOP WATER FROM GETTING IN With simpler products there is a sizeable risk that water and moisture will

enter into the antenna system. This can occur in various ways, the most

likely of which being through poorly sealed connectors, jumper cables or

grounding kits.

External sealants do not protect against moisture that migrates within

the feeder system. Water that collects in antenna panels or amplifiers

can travel down through the system if the connector interface is not

waterproof. Should a crack or hole appear in the feeder cable’s plastic

jacket, water will enter and travel along the outer conductor to nearby

connectors. Our built-in O-ring system prevents migration of this kind

from occurring inside antenna lines.

FROM THE COLDEST TO THE WARMEST CLIMATIC CONDITIONS Exir Telecom branded products are developed to withstand all climatic

conditions. They have been designed primarily for the harsh Scandina-

vian climate, made to function in the freezing cold of near Arctic winters.

Our products have been tested for performance in a variety of extreme

climatic conditions, from the coldest to the warmest temperatures and

at various humidity levels. They are also proven to be dust-tight and able

to withstand the pressure of desert installation.

Products branded Exir Telecom are designed to operate problem-free

for a minimum of 25 years without any maintenance or any external

sealing. Our products have built-in weather protection consisting of

O-ringsmade of EPDM. These O-rings feature completely seamless

surfaces, superior workability of the sealing under extreme climatic

actions and very good resistance to climatic changes, ozone and UV-

radiation. O-rings of this type are used in the most demanding and

highly critical applications including nuclear power plants, military

uses and various medical equipment.

As our products require no external sealing whatsoever, you will never

have to worry about the unnecessary cost, time-consumption and an-

noyance of taping ever again.

EXCEEDS IP 68The International Standards IP Protection Classification established by

IEC (International Electrotechnical Commission) provides a system for

specifying enclosures of electrical equipment on the basis of the de-

gree of protection required. In order to be awarded IP68 classification

a product must be able to withstand a water pressure of 0.1 bar for 30

minutes. This corresponds to a depth one metre of water.

Exir Telecom’s products for exposed situations have been successfully

tested to withstand 2.5 bar. This means that they can safely operate at

depths of 25 metres under water, which far exceeds the requirements of

the international IP68 standard.

SNOW AND ICE

HUMIDITY AND HEAVY RAIN

DUST AND SAND STORMS

SALT WATER AND STRONG WINDS


Keeping your workforce up to date with the rapid advancements in today’s mobile telephone technology requires a commitment to continuous training. But can you afford the time it takes for installers to attend training courses when there are deadlines to be met?

LEAX Arkivator Telecom recognises these pressures, which is why we have developed

a series of flexible, on-site training courses designed to fit around your work schedule

- not ours.

This increasingly popular training option minimises ’lost’ time travelling to an off-site

venue, and allows installers to conveniently update their skills at their place of work even

if the network is being constructed at several sites simultaneously. A typical connector

installation course lasts half a day and can accommodate up to eight participants.

Our on-site training scheme is actually a series of related courses which focus on

the practical aspects of working with connectors and cables. This is a vitally impor-

tant area, as incorrectly installed connectors can result in major power dissipation.

In simple terms, doing the job right the first time results in the highest level of cost

efficiency in the long run.

HANDS-ON TRAINING FOR EVERYONEAll of our instructors have extensive ’hands-on’ experience working with mobile tele-

phony networks in a variety of situations. This means they are capable of answering

questions on both a theoretical and practical level.

During our Connector Installation Course all participants are given the opportunity to

install each of the connector types available in our program. Our qualified instructors are

on hand to answer questions and to lend a helping hand when needed. They also check

each installation to ensure that it meets the required standards of workmanship.

All participants receive a personalised certificate of achievement upon successful

completion of our courses.

LEARN MORE AT LEAX ARKIVATOR TELECOMLEAX Arkivator Telecom also holds advanced, 5-day courses geared primarily to tech-

nical supervisors, purchasers and project managers.

EXAMPLES OF COURSES

CONNECTOR INSTALLATION COURSEBasic course covering techniques for proper connector installation.

INTRODUCTORY COURSEThis course provides introductory theory and practical training relat-ing to such areas as planning and building fully operational antenna lines for cellular telephony.

ADVANCED COURSEThis course offers an in-depth look into various aspects of RF as well as examines essential issues when planning and building fully opera-tional antenna lines

For more detailed information regarding courses, please contact us.

On-site Training


CONNECTORS

Exir Telecom branded connectors offer many built-in advantages, such as an ex-

panding inner conductor for superior electrical performance, longer body construc-

tion for reduced stress on cables, and advanced weather protection features which

completely eliminate the need for putty tape or any other external weatherproofing.

The LEAX range of connectors are also fully tested and suitable for less harsh envi-

ronments and indoor applications. All of our products have been tested in extreme

climatic conditions. Our connectors are fast and easy to install, and are fully compat-

ible with all major cable brands.

Exir branded Connectors

1/2” Flexible Foam Dielectric

1/2” Flexible Foam Dielectric Right Angle

1/2” Foam Dielectric - Tighten Inner Conductor

1/2” Foam Dielectric Contact Springs

1/2” Foam Dielectric Right Angle

7/8” Foam Dielectric - Contact Springs

7/8” Foam Dielectric - Expanding Inner Conductor

1 1/4” Foam Dielectric

1 5/8” Foam Dielectric

Tools for Foam and Superflex Connectors

LEAX branded Connectors

1/2” Foam Dielectric

1/2” Foam Dielectric Right Angle

7/8” Foam Dielectric

N Male for RGC8

N Male for 3/8” in, FS

I300 N Connectors

I300 N Male Right Angle

I300 TNC Male Right Angle

I400 N Connectors

I400 N Male Right Angle

I400 TNC Male Right Angle

Adaptors


Connectors1/2” Superflexible Foam Dielectric

* During intermodulation measurement attached cables are exposed to shock and vibration.

NM-S012-A0 NF-S012-A0

716M-S012-A0 716F-S012-A0

COMMON FOR ALL

CABLE FORMAT 1/2"

CONNECTOR OPERATING FREQUENCY 0 - 7500 MHz

VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-1/2 SF

Andrew FSJ4-50B

Cablewave S-FLC 12

Condumex RF 1/2”-50 SF

Eupen 5092 1/2” Hiflex

Leoni FlexLine 1/2” S

NK Cables RFF 1/2"-50

RFS Cellflex SCF12-50J

Leax FEED-S012

INTERMODULATION*

2 x 20 W transmitter < -156 dBc

CONNECTING TIME 5 - 6 min

WEIGHT 190 g (0.42 lb)

DIAMETER 27 mm (1.06 in)

LENGTH 76 mm (2.99 in)

OPERATING TEMP. -55 °C to +80 °C

PIECES IN BOX 25

TOOL KIT CONK-S012-B0

ARTICLE NM-S012-A0 NF-S012-A0 716M-S012-A0 716F-S012-A0

CONNECTOR N male N female DIN 7/16 male DIN 7/16 female

PRODUCT FEATURES

� Reusable

� Auto-flaring for faster installation

� IP68-classified and water-pressure proof tested down to 25 m

� High quality O-rings on outer conductor and cable jacket ensure

functional integrity even after accidental damage to cable jacket

� Designed to maintain high pressure on contact surfaces to reduce

intermodulation

Revision B


Connectors1/2” Superflexible Foam Dielectric Right Angle


COMMON FOR ALL

CABLE FORMAT 1/2"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


Andrew FSJ4-50B

Cablewave S-FLC 12



NK Cables RFF 1/2"-50


INTERMODULATION*

2 x 20 W transmitter <-156 dBc





WIDTH 62 mm (2.44 in)


PIECES IN BOX 25

TOOL KIT CONK-S012-B0

ARTICLE NM-S012-B0 NF-S012-B0 716M-S012-B0 716F-S012-B0

CONNECTOR N male right angle N female right angle DIN 7/16 male right angle DIN 7/16 female right angle

PRODUCT FEATURES

� Reusable


� No need for tape or other external weatherproofing





intermodulation

NM-S012-B0 NF-S012-B0

716M-S012-B0 716F-S012-B0

Revision A

12 Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com Revision B

Connectors1/2” Foam Dielectric - Tighten Inner Conductor


ARTICLE 00NM-F012-G1 00NF-F012-G1 716M-F012-G1 716F-F012-G1


DIAMETER 27 mm (1.06 in) 27 mm (1.06 in) 34 mm (1.34 in) 29 mm (1.14 in)

LENGTH 81.5 mm (3.21 in) 79.5 mm (3.13 in) 71 mm (2.79 in) 71 mm (2.79 in)

PRODUCT FEATURES

� Reusable



� No need for amalgamating tape or other external weatherproofing




intermodulation

NM-F012-G1 NF-F012-G1

716M-F012-G1 716F-F012-G1

COMMON FOR ALL

CABLE FORMAT 1/2"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Andrew LDF4-50

NK Cables RFA 1/2” -50

Cellflex LCF 1/2” Cu2Y

RFS LCF 1/2” -50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50- 1/2” flex

Leoni FlexLine 1/2” R

Condumex RF 1/2” -50

INTERMODULATION*





PIECES IN BOX 25

TOOL-KIT CONK-F012-G0 (std.)

CONK-F012-F0 (basic)

13Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com Revision C

1/2” Foam Dielectric- Tighten Inner Conductor

Connectors1/2” Foam Dielectric - Contact Springs


ARTICLE 00NM-F012-H1 00NF-F012-H1 716M-F012-H1 716F-F012-H1


DIAMETER 27 mm (1.06 in) NM 27 mm (1.06 in) NF 34 mm (1.34 in) 7/16m 29 mm (1.14 in) 7/16f

LENGTH 68 mm (2.68 in) NM 66 mm (2.60 in) NF 57 mm (2.25 in) 7/16m 55 mm (2.17 in) 7/16f

PRODUCT FEATURES

� Reusable






� Designed to maintain high pre sure on contact surfaces to reduce

� intermodulation

NM-F012-H1 NF-F012-H1

716M-F012-H1 716F-F012-H1

COMMON FOR ALL

CABLE FORMAT 1/2"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


NK Cables RFA 1/2” -50


RFS LCF 1/2” -50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50- 1/2” flex


Condumex RF 1/2” -50

Leax FEED-F012

INTERMODULATION*





PIECES IN BOX 25

TOOL-KIT CONK-F012-H0 (std.)



Connectors1/2” Foam Dielectric Right Angle

PRODUCT FEATURES

� Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1/2"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


NK Cables RFA 1/2"-50

Cellflex LCF 1/2" Cu2Y

RFS LCF 1/2"-50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50-1/2” flex


Condumex RF 1/2”-50

INTERMODULATION*






WITH 49.5 mm (1.95 in)


PIECES IN BOX 25

TOOL-KIT CONK-F012-G0 (std.)


ARTICLE 00NM-FO12-AI00 716M-F012-AI00

CONNECTOR N male right angle DIN 7/16 male right angle

00NM-FO12-AI00 716M-F012-AI00

Revision A


Connectors7/8” Foam Dielectric - Contact Springs

PRODUCT FEATURES

� Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 7/8"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-7/8” flex

Acome HPL 50-7/8” LA

Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A


NK Cables RF 7/8"-50

NK RFA 7/8”

Tsvetlit PK50-22-39-C 7/8"R

HANSEN 7/8"

INTERMODULATION*




DIAMETER 39.5 mm (1.56 in)


PIECES IN BOX 25

TOOL KIT CONK-F078-AJ00

ARTICLE 00NM-F078-AF00 00NF-F078-AF00 716M-F078-AF00 716F-F078-AF00



00NM-F078-AF00 00NF-F078-AF00

716M-F078-AF00 716F-F078-AF00

Revision B


Connectors7/8” Foam Dielectric - Expanding Inner Conductor

PRODUCT FEATURES

� Reusable

� Expanding inner conductor







intermodulation


COMMON FOR ALL

CABLE FORMAT 7/8"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB



Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A



NK RFA 7/8”


HANSEN 7/8"

INTERMODULATION*




DIAMETER 39.5 mm (1.56 in)


PIECES IN BOX 25

TOOL KIT CONK-F078-AJ00

ARTICLE 00NM-F078-AG00 00NF-F078-AG00 716M-F078-AG00 716F-F078-AG00



00NM-F078-AG00 00NF-F078-AG00

716M-F078-AG00 716F-F078-AG00

Revision B


Connectors1 1/4” Foam Dielectric

PRODUCT FEATURES

� Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1 1/4"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-1 1/4 flex

Andrew LDF6-50

Cablewave FLC 114

Cellflex LCF 1 1/4” Cu2Y

Condumex RF 1 1/4”-50

Eupen 5328

Eupen Hiflex EC6-50-HF

Leoni FlexLine 1 1/4” R

NK Cables RFA 1 1/4"-50

RFS LCFS114-50JA

INTERMODULATION*




DIAMETER 51 mm (2 in)


PIECES IN BOX 20

TOOL KIT CONK-F114-AB00

ARTICLE 00NM-F114-AD00 00NF-F114-AD00 716M-F114-AD00 716F-F114-AD00


LENGTH 110 mm (4.33 in) NM 108 mm (4.25 in) Nf 98 mm (3.86 in) 7/16m 97 mm (3.82 in) 7/16f

00NM-F114-AD00 00NF-F114-AD00

716M-F114-AD00 716F-F114-AD00

Revision A


Connectors1 5/8” Foam Dielectric

PRODUCT FEATURES

� Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1 5/8"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-158 flex

Andrew AVA7-50

Andrew LDF7-50A

Cablewave FLC 158

Cellflex LCF 1 5/8" Cu2Y

Condumex RF 1 5/8”-50

Leoni FlexLine 1 5/8” R

NK Cables RFA 1 5/8"-50

RFS LCF158-50JA

INTERMODULATION*



WEIGHT 1100 g (2.42 lb)



PIECES IN BOX 10

TOOL KIT CONK-F158-AC00

ARTICLE 00NM-F158-AD00 00NF-F158-AD00 716M-F158-AD00 716F-F158-AD00



00NM-F158-AD00 00NF-F158-AD00

716M-F158-AD00 716F-F158-AD00

Revision A


PRODUCT PROFILE

The Exir telecom branded tool kits are designed to enable fast instal-

lation of our connectors. Tools can be ordered separately or in kits. All

connectors and tool kits are delivered with illustrated mounting instruc-

tions. We also offer courses in connector installation.

Cable Preparation Toolsfor Cable Connectors

ARTICLE KIT-BAG CONTENTS CONNECTORS

CONK-S012-B0 Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool, open wrenches, wrench for N and DIN 7/16, silicone gasket protector, N to DIN 7/16 adapter, brush.

xxxx-S012-A0 xxxx-716M-S012-B0

CONK-F012-G0Standard Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool,

open wrenches, wrench for N and DIN 7/16, N to DIN 7/16 adapter, brush.

xxxx-F012-G1xxxx-F012-AH00 xxxx-F012-AI00

CONK-F012-H0Standard Cable peeler, cable holders, flaring tool, open wrenches, wrench for N and DIN 7/16, brush. xxxx-F012-H1

CONK-F012-F0Basic

Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.

xxxx-F012-G1 xxxx-F012-H1 xxxx-F012-AH00 xxxx-F012-AI00

CONK-F078-AJ00 Standard Cable peeler, cable holders, open wrenches, wrench for N and DIN 7/16, brush,

razor blades, inner conductor tightener 7/16, N to DIN 7/16 adapter.

xxxx-F078-AE02 xxxx-F078-AF00xxxx-F078-AG00

CONK-F078-G0 Basic

Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.

xxxx-F078-AE02 xxxx-F078-AF00xxxx-F078-AG00

CONK-F114-AB00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-F114-AD00

CONK-F158-AC00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-F158-AD00

Revision A


ToolsTools for Foam and Superflex Connectors

CABLE PEELER

PEEL-S012-B0 1/2” flexible

PEEL-F012-F0 1/2”

PEEL-F078-G0 7/8”

PEEL-F114-A0 1 1/4”

PEEL-F158-A0 1 5/8”

OPEN WRENCHES

OCST-S012-A1 1/2” flexible

OCST-F012-H0 1/2” H1

OCST-S012-A1 1/2” G1

OCST-F078-B0 7/8”

INNER CONDUCTORSTRAINERS AND FLARING TOOLS

ISFL-S012-B0 1/2” flexible

FLAT-F012-H0 1/2” H1

ISFL-F012-B0 1/2” G1

ICST-7160-C0* 7/16 without torque

SPANNERS

014-51510 1 1/4” and 1 5/8”

CABLE HOLDERS

CABH-0012-A1 1/2” flexible

CABH-F012-A1 1/2”

CABH-0078-A1 7/8”

CABH-0114-A1 1 1/4”

CABH-0158-A1 1 5/8”

WRENCH

OCST-N716-A1 N and DIN 7/16”

ADAPTER

ICST-000N-A1 N to DIN 7/16”

SILICONE GASKET PROTECTOR

CONT-S012-A1 1/2” flexible

SILICONE GREASE

014-54502 Silicone grease

BRUSH

014-54500 Plastic brush

RAZOR BLADES

014-54503 Big for 7/8”10 pieces

014-54504 Small for 1/2”, 1 1/4”, 1 5/8”

CUTTING JIGS

CJIG-F114-A1 1 1/4”

CJIG-F158-A1 1 5/8”

Revision A

Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com 21

Connectors1/2” Foam Dielectric

PRODUCT FEATURES

� Reusable


� High quality O-rings


intermodulation

COMMON FOR ALL

CABLE FORMAT 1/2"

VSWR / RETURN LOSS

0 - 2700 MHz 1.10 / -26.5 dB





Cablewave FLC 12

Eupen 5128




INTERMODULATION*




ARTICLE 00NM-F012-BA00 00NF-F012-BA00 716M-F012-BA00 716F-F012-BA00


LENGTH ??? mm (in) ??? mm (in) 50 mm (1.97 in) ?? (?? in)

WEIGHT ??? mm (in) ??? mm (in) 118 g (0.26 lb) 104 g (0.23 lb)

Revision A


00NM-F012-BA00 00NF-F012-BA00

716M-F012-BA00 716F-F012-BA00

Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com22

Connectors1/2” Foam Dielectric Right Angle

PRODUCT FEATURES

� Reusable




intermodulation

COMMON FOR ALL

CABLE FORMAT 1/2"

VSWR / RETURN LOSS

0 - 2700 MHz 1.10 / -26.5 dB





Cablewave FLC 12

Eupen 5128




INTERMODULATION*




ARTICLE 00NM-F012-BI00 00NF-F012-BI00 716M-F012-BI00 716F-F012-BI00


LENGTH 55 mm (2.17 in) 55 mm (2.17 in) ?? (?? in)

WIDTH 35 mm (1.38 in) 35 mm (1.38 in) ?? (?? in)

WEIGHT 80 g (0.18 Ib) 80 g (0.18 Ib)

Revision A


00NM-F012-BI00 00NF-F012-BI00

716M-F012-BI00 716F-F012-BI00

Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com 23Revision A

Connectors7/8” Foam Dielectric

PRODUCT FEATURES

� Reusable




intermodulation

COMMON FOR ALL

CABLE FORMAT 7/8"

VSWR / RETURN LOSS

0 - 2700 MHz 1.10 / -26.5 dB



Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A



NK RFA 7/8”


HANSEN 7/8"

INTERMODULATION*





ARTICLE 00NM-F078-BA00 00NM-F078-BA00 716M-F078-BA00 716F-F078-BA00


LENGTH ??? ??? 57 mm (2.24 in)

WEIGHT ??? ??? 195 g (0.43 lb)


00NM-F078-BA00 00NF-F078-BA00

716M-F078-BA00 716F-F078-BA00


ConnectorsN Male for RGC8

COMMON FOR ALL 716M-RGC8-BA00

IMPEDANCE 50 Ohm

INSERTION LOSS ≤ 0.05×√F(GHz) dB

VSWR / RETURN LOSS

824 - 960 MHz ≤ -24.3 dB (1.13)

1710 - 2690 MHz ≤ -23.1 dB (1.15)

INTERMODULATION

3rd order < -155 dBc (112 dBm)

3rd order test method Two +43 dBm Carriers

OPERATING TEMPERATURE -55 °C to +85 °C

CONTACT ATTACHMENT

Outer Crimp

Inner Solder

Revision A


ConnectorsN Male for 3/8” in, FS

COMMON FOR ALL 716M-F038-BA00

CABLE FORMAT 50 Ohm

IMPEDANCE 3/8”

INSERTION LOSS ≤ 0.05×√F(GHz) dB

VSWR / RETURN LOSS

824 - 960 MHz ≤ -28.3 dB (1.08)

1710 - 2690 MHz ≤ -26.5 dB (1.10)

INTERMODULATION

3rd order < -155 dBc (112 dBm)



Revision A


ConnectorsN Connectors for I300

COMMON FOR ALL

OPERATING FREQUENCY BAND 0 - 3000 MHz

INSERTION LOSS ≤ 0.05×√F(GHz) dB (typical)


CONTACT ATTACHMENT

Inner Solder/ Assembling

Outer Assembling

INNER CONDUCTOR Phosphor bronze, Gold - Plated

INSULATOR PTFE

OUTER CONDUCTOR Brass, Nickel - Plated

O-RING Silicone Rubber

DUST CAPS Polypropylene (PP)

CONTACT RESISTANCE

Inner Conductor ≤ 1.5 mΩ

Outer Conductor ≤ 1.0 mΩ

INSULATION RESISTANCE ≥ 5000 mΩ

AVERAGE POWER 0.5 kW @ 900 MHz

OPERATING VOLTAGE (@ sea level, 50Hz AC) ≤ 1000 V

IMPEDANCE 50 Ohm

ARTICLE 00NM-I300-BA00 00NF-I300-BA00

CONNECTOR N Male N Female

Revision D


ConnectorsN Male Right Angle

COMMON FOR ALL 00NM-I300-BI00

IMPEDANCE 50 Ohm

FREQUENCY RANGE 0 - 3000 MHz

RETURN LOSS ≤ -23.1 dB (VSWR ≤1.15)


STORAGE TEMPERATURE -55 °C to +85 °C

INNER CONDUCTOR Brass, Gold - Plated

INSULATOR PTFE



CONTACT RESISTANCE



BANNED AND RESTRICTED SUBSTANCESROHS 2002/95/EC Compliant by Exemption

Revision A


ConnectorsTNC Male Right Angle

COMMON FOR ALL TNCM-I300-BI00

OPERATING FREQUENCY BAND 0 - 3000 MHz



CONTACT ATTACHMENT

Inner Solder/ Assembling

Outer Assembling


INSULATOR PTFE




CONTACT RESISTANCE






IMPEDANCE 50 Ohm

Revision C


ConnectorsN Connectors for I400

COMMON FOR ALL

IMPEDANCE 50 Ohm



VSWR / RETURN LOSS ≥ 24.3 dB


CONTACT ATTACHMENT

Inner Assembling

Outer Assembling


INSULATOR PTFE




CONTACT RESISTANCE






ARTICLE 00NM-I400-BA00 00NF-I400-BA00

CONNECTOR N Male N Female

Revision A


ConnectorsN Male Right Angle

COMMON FOR ALL 00NM-I400-BI00

IMPEDANCE 50 Ohm




CONTACT ATTACHMENT

Inner Solder

Outer Assembling


INSULATOR PTFE




CONTACT RESISTANCE






Revision B


ConnectorsTNC Male Right Angle

COMMON FOR ALL TNCM-I400-BI00

IMPEDANCE 50 Ohm




CONTACT ATTACHMENT

Inner Solder

Outer Assembling


INSULATOR PTFE




CONTACT RESISTANCE






Revision B


Adaptors

Revision B

ELECTRICAL CHARACTERISTICS


IMPEDANCE 50 Ohm

INSERTION LOSS

0 - 3000 MHz < 0.1 dB

RETURN LOSS/VSWR

Normal Adaptors

0 - 3500 MHz < -35 dB (1.04)

Angle Adaptors

0 - 2500 MHz < -35 dB (1.04)

2500 - 3500 MHz < -30 dB (1.07)

INTERMODULATION

3rd order ≤ -155 dBc (112 dBm) @ 910 MHz



SEALING O-ring

PLATING Silver-plated

ARTICLE - NORMAL

7/16M-7/16M 716M-716M-BA00

7/16F-7/16F 716F-716F-BA00

7/16M-7/16F 716M-716F-BA00

7/16M-NF 716M-00NF-BA00

7/16M-NM 716M-00NM-BA00

7/16F-NF 716F-00NF-BA00

7/16F-NM 716F-00NM-BA00

NF-NF 00NF-00NF-BA00

NM-NM 00NM-00NM-BA00

NM-NF 00NM-00NF-BA00

ARTICLE - ANGLE

7/16M-7/16M 716M-716M-BA01

7/16F-7/16F 716F-716F-BA01

7/16M-7/16F 716M-716F-BA01

7/16M-NF 716M-00NF-BA01

7/16M-NM 716M-00NM-BA01

7/16F-NF 716F-00NF-BA01

7/16F-NM 716F-00NM-BA01

NF-NF 00NF-00NF-BA01

NM-NM 00NM-00NM-BA01

NF-NM 00NF-00NM-BA01


FEEDER CABLE

The LEAX branded feeder cable range provides a very good standard feeder cable

solution. These cables are cased in black polyethylene and as usual very well posi-

tioned price wise.

LEAX branded Feeder Cables

Feeder Cable, Foam Coaxial Cable, 1/2” in, Black PE Jacket

Superflex Feeder Cable, Foam Coaxial Cable, 1/2” in, Black PE Jacket



Link Cable, Foam Coaxial Cable, RG8, Black PE Jacket

Link Cable, Foam Coaxial Cable, I300, Black PE Jacket

Link Cable, Foam Coaxial Cable, I300, Black LSZH Jacket




Feeder CableFoam Coaxial Cable, 1/2” in, Black PE Jacket

ELECTRICAL FEED-F012-AA00

IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)

MAX OPERATING FREQUENCY 8800 MHz

VELOCITY 88 %

CAPACITANCE 76 pF/m

PASSIVE INTER-MODULATION ≤ -155 dBc @ 2 x 20W (43dBm)

RF PEAK POWER RATING ≥ 40 KW

RF PEAK VOLTAGE ≥ 4000 V

JACKET SPARK TEST (RMS) ≥ 8000 V

DIELECTRIC RESISTANCE ≥ 5000 MOhm / Km

IMPEDANCE 50 Ohm

MECHANICAL

MIN BEND RADIUS, MULTIPLE BENDS 130 mm

MIN BEND RADIUS, SINGLE BEND 80 mm

BENDING MOMENT 3.8 Nm

TENSILE STRENGTH ≥ 1100 N

ENVIRONMENTAL

OPERATING TEMPERATURE -50°C ~ +85°C

INSTALLATION TEMPERATURE -40°C ~ +60°C

STORAGE TEMPERATURE -70°C ~ +85°C

RELATIVE HUMIDITY 0 ~ 95%

COMPLIANCY ROHS 2002/95/EC

ATTENUATION AND AVERAGE POWER

FREQUENCY (MHZ) ATTENUATION (DB/100M) AVERAGE POWER (KW)

450 MHZ 4.75 1.61

824 MHZ 6.56 1.16

960 MHZ 7.1 1.07

1000 MHZ 7.28 1.05

1800 MHZ 10.0 0.76

2000 MHZ 10.67 0.72

2200 MHZ 11.25 0.68

2500 MHZ 12.09 0.63

2700 MHZ 12.63 0.60

Revision B

PRODUCT STRUCTURE

DESIGNATION MATERIAL DIAMETER (mm)

1 Inner Conductor Copper clad aluminum wire 4.80±0.03

2 Dielectric Physical Foam Polyethylene 12.20±0.2

3 Outer Conductor Regular corrugated copper tube 13.90±0.25

4 Jacket Black polyethylene, PE 15.70±0.20


Feeder CableSuperflex Foam Coaxial Cable, 1/2” in, Black PE Jacket

ELECTRICAL FEED-S012-BA00

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)


VELOCITY 83 %

CAPACITANCE 83 pF/m

PASSIVE INTER-MODULATION ≤ -155 dBc @ 2 x 20 W (43 dBm)





IMPEDANCE 50 Ohm

MECHANICAL





ENVIRONMENTAL








450 MHZ 7.59 1.38

824 MHZ 10.6 1.00

960 MHZ 11.6 0.92

1000 MHZ 11.8 0.89

1800 MHZ 16.6 0.64

2000 MHZ 17.7 0.60

2200 MHZ 18.7 0.57

2500 MHZ 20.1 0.53

2700 MHZ 21.1 0.50

Revision A

PRODUCT STRUCTURE


1 Inner Conductor Copper clad aluminum wire 3.58

2 Dielectric Physical Foam Polyethylene Nom. 9.0

3 Outer Conductor Helical corrugated copper tube 12.20

4 Jacket Black polyethylene, PE 13.60




IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)


VELOCITY 88 %

CAPACITANCE 76 pF/m


RF PEAK POWER RATING ≥ 15.6 KW




MECHANICAL





ENVIRONMENTAL








450 MHZ 7.52 1.03

824 MHZ 10.40 0.74

960 MHZ 11.30 0.68

1000 MHZ 11.56 0.67

1800 MHZ 16.00 0.48

2000 MHZ 16.97 0.45

2200 MHZ 17.91 0.43

2500 MHZ 19.26 0.40

2700 MHZ 20.13 0.38

Revision A

PRODUCT STRUCTURE


1 Inner Conductor Copper clad aluminum wire 3.30±0.05


3 Outer Conductor Corrugated copper tube 9.60±0.25





IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)


VELOCITY 88 %

CAPACITANCE 76 pF/m





DIELECTRIC RESISTENCE ≥ 5000 MOhm / KM

IMPEDANCE 50 Ohm

MECHANICAL





ENVIRONMENTAL








450 MHZ 2.44 3.44

824 MHZ 3.38 2.49

960 MHZ 3.8 2.29

1000 MHZ 3.76 2.24

1800 MHZ 5.4 1.61

2100 MHZ 5.8 1.52

2200 MHZ 5.83 1.44

2500 MHZ 6.27 1.34

2700 MHZ 6.55 1.28

Revision B

PRODUCT STRUCTURE


1 Inner Conductor Copper tube 8.90±0.10


3 Outer Conductor Regular corrugated copper tube 24.90±0.30



PRODUCT STRUCTURE


1 Inner Conductor Copper clad aluminium 2.74±0.025

2 Dielectric Foam Polyethylene 7.24±0.13

3 Outer Conductor Bonded aluminum foil --

3 Outer Conductor Tinned copper wire braid Nom. 8.13


RG8 Link Cable

ELECTRICAL FEED-F0R8-AA00

IMPEDANCE 50 Ohm

RETURN LOSS/VSWR

5 - 3000 MHz ≤ 1.20

MAX OPERATING VOLTAGE 3.0

VELOCITY 85%

CAPACITANCE Nom. 78

INSULATION RESISTANCE 5000

SCREENING EFFECTIVENESS 90

ENVIRONMENTAL


BENDING RADIUS ONCE 25

REPEATED BENDING RADIUS 76

FLEXIBLE APPLICATION RADIUS 102

COMPLIANCY RoHS

ATTENUATION @ 20°C AND SEA LEVEL

FREQUENCY (MHZ) ATTENUATION (DB/100M)

140 6.0

350 9.0

900 15.0

1800 20.0

1900 21.0

2500 25.0

3000 28.0

4000 34.0

5000 38.0

6000 42.0

Revision A


PRODUCT STRUCTURE





3 Outer Conductor Tinned copper braid Nom. 5.70



ELECTRICAL FEED-I300-BA00

IMPEDANCE 50±2 Ohm

DIELECTRIC RESISTANCE 5000 MOhm•km

DIELECTRIC STRENGTH 2.0 kV

CAPACITANCE Nom. 77 pF/m


MAX OPERATING VOLTAGE 2.0 kV

MECHANICAL & ENVIRONMENTAL


BENDING RADIUS ONCE 50 mm

REPEATED BENDING RADIUS 150 mm

NET WEIGHT 27 kg/km

COMPLIANCY RoHS

ATTENUATION @ 20°C AND SEA LEVEL, POWER (20°C)


10 2.7

140 10.0

350 15.0

900 22.0

1800 32.0

2000 34.0

2500 39.0

3000 43.9

Revision A


PRODUCT STRUCTURE


1 Inner Conductor Solid copper or Copper clad aluminium 1.80±0.025


3 Outer Conductor Bonded aluminum foil + Tinned copper braid

Nom. 5.70

4 Jacket LSZH 7.60±0.20



IMPEDANCE 50 Ohm

VELOCITY OF PROPAGATION 85%

INNER CONDUCTOR DC RESISTANCE 7.28/11.56 Ohm/m

OUTER CONDUCTOR DC RESISTANCE 7.62 Ohm/m

CAPACITANCE 77 pF/m

JACKET VOLTAGE WITHSTANDING 5000 Vrms

PEAK POWER 10 kW

SHIELDING EFFECTIVENESS > 90 dB



BENDING RADIUS 38 mm

COMPLIANCY RoHS

ATTENUATION AND AVERAGE POWER (20°C)

FREQUENCY (MHZ) ATTENUATION (DB/100M) AVG. POWER (KW)

30 3.90 1.78

50 4.80 1.38

150 7.80 0.79

220 9.40 0.65

450 13.20 0.45

900 19.40 0.31

1500 26.00 0.24

1800 28.00 0.22

2000 29.90 0.21

2500 34.00 0.18

5800 54.30 0.11

Revision A


PRODUCT STRUCTURE





3 Outer Conductor Tinned copper braid Nom. 8.13




IMPEDANCE 50±2 Ohm

DIELECTRIC RESISTANCE 5000 MOhm•km

DIELECTRIC STRENGTH 2.0 kV

CAPACITANCE Nom. 78 pF/m


MAX OPERATING VOLTAGE 2.0 kV



BENDING RADIUS ONCE 25 mm

REPEATED BENDING RADIUS 102 mm

NET WEIGHT 100 kg/km

COMPLIANCY RoHS

ATTENUATION @ 20°C AND SEA LEVEL, POWER (20°C)


10 2.7

140 10.0

350 15.0

900 22.0

1800 32.0

2000 34.0

2500 39.0

3000 43.9

Revision A


PRODUCT STRUCTURE




3 Outer Conductor Bonded aluminum foil +Tinned copper braid (Coverage 90%)

Nom. 8.13

4 Jacket LSZH 10.16±0.20



IMPEDANCE 50 Ohm

VELOCITY OF PROPAGATION 85%

INNER CONDUCTOR DC RESISTANCE ≤ 4.50 Ohm/km

OUTER CONDUCTOR DC RESISTANCE ≤ 5.40 Ohm/km

CAPACITANCE 78 pF/m

JACKET VOLTAGE WITHSTANDING 8.0 KVrms

PEAK POWER 16 kW

SHIELDING EFFECTIVENESS > 90 dB




TENSILE STRENGTH 726 N

FLAT PLATE CRUSH STRENGTH 0.71 kg/mm



COMPLIANCY RoHS

ATTENUATION AND AVERAGE POWER (20°C)


30 2.2

50 2.9

150 5.0

220 6.1

450 8.9

900 12.8

1500 16.8

1800 18.6

2000 19.6

2500 22.2

3000 22.8

4000 27.2

5000 30.9

6000 34.3

Revision A


JUMPER CABLES

Both our brands of Jumpers exceeds the requirements for IP68-classification. Conse-

quently there is no need for tape or any other external weatherproofing. All jumper

cables are available in any length and offer a generous bending radius. Every cable is

tested and can as an option come individually labeled with the results to identify its

measured return loss performance within the 0 - 3000 MHz range.

Exir branded Jumper Cables

1/2” Foam Dielectric Cable

1/2” Superflexible Foam Dielectric Cable

1/2” Superflexible Foam Dielectric Cable - Angle Connector

LEAX branded Jumper Cables



AISG DC Jumper Cable


Jumper Cables1/2” Foam Dielectric Cable

PRODUCT FEATURES

� 10-year comprehensive warranty




intermodulation

� Each cable individually tested an labelled with return loss graph,

0 - 2200 MHz

* Typical return loss connector.** During intermodulation measurement attached cables are exposed to shock and vibration.*** XX is the length of the cable. For example: AB05=0.5 m, AB10=1.0 m.

DIN 7/16 TO DIN 7/16

ARTICLE CONNECTORS

JBB0-F012-ABxx*** DIN 7/16 male to DIN 7/16 male

JAB0-F012-ABxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-F012-ABxx DIN 7/16 male to N male

JAD0-F012-ABxx DIN 7/16 female to N male

N TO N

ARTICLE CONNECTORS

JDD0-F012-ABxx N male to N male

JCD0-F012-ABxx N female to N male

COMMON FOR ALL

CABLE TYPE 1/2"


VSWR / RETURN LOSS

0 - 1000 MHz 1.08 / -28 dB (-35 dB)*

1000 - 2200 MHz 1.10 / -26 dB (-35 dB)*

INTERMODULATION**



Revision A


Jumper Cables1/2” Superflexible Foam Dielectric Cable

PRODUCT FEATURES

� Each cable individually tested




� Designed to maintain high pressure on contact surfacces to reduce

intermodulation

* Typical performance for jumpers of ordinary length.** During intermodulation measurement, cables were exposed to shock and vibration.*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.

COMMON FOR ALL

CABLE TYPE 1/2" Superflex


VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**




ARTICLE CONNECTORS

JBB0-S012-ACxx*** DIN 7/16 male to DIN 7/16 male

JAB0-S012-ACxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-S012-ACxx DIN 7/16 male to N male

JBC0-S012-ACxx DIN 7/16 male to N female

N TO N

ARTICLE CONNECTORS

JDD0-S012-ACxx N male to N male

JCC0-S012-ACxx N female to N female

Revision A


Jumper Cables1/2” Superflexible Foam Dielectric Cable - Angle Connector Angle Connector

PRODUCT FEATURES

� Each cable individually tested


� Outstanding VSWR and IM values



COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**



* Typical performance for jumpers of ordinary length.** During intermodulation measurement, cables were exposed to shock and vibration.*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.


Revision C


ARTICLE CONNECTORS

JBA1-S012-ACxx*** DIN 7/16 male angle to DIN 7/16 female

JBB1-S012-ACxx DIN 7/16 male angle to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBC1-S012-ACxx DIN 7/16 male angle to N female

JBD1-S012-ACxx DIN 7/16 male angle to N male

JDA1-S012-ACxx DIN 7/16 female to N male angle

JDB1-S012-ACxx DIN 7/16 male to N male angle

N TO N

ARTICLE CONNECTORS

JDC1-S012-ACxx N male angle to N female

JDD1-S012-ACxx N male angle to N male


Jumper Cables1/2” Superflexible Foam Dielectric Cable

* Typical return loss connector.** During intermodulation measurement attached cables are exposed to shock and vibration.*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.

Revision C

PRODUCT FEATURES



intermodulation

COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**





ARTICLE CONNECTORS

JBB0-S012-BAxx*** DIN 7/16 male to DIN 7/16 male

JAB0-S012-BAxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-S012-BAxx DIN 7/16 male to N male

JBC0-S012-BAxx DIN 7/16 male to N female

N TO N

ARTICLE CONNECTORS

JDD0-S012-BAxx N male to N male

JCC0-S012-BAxx N female to N female


Jumper Cables1/2” Superflexible Foam Dielectric Cable - Angle Connector Angle Connector

PRODUCT FEATURES



intermodulation

COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**



* Typical performance for jumpers of ordinary length.** During intermodulation measurement, cables were exposed to shock and vibration.*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.

Revision C



ARTICLE CONNECTORS

JBA1-S012-BAxx*** DIN 7/16 male angle to DIN 7/16 female

JBB1-S012-BAxx DIN 7/16 male angle to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBC1-S012-BAxx DIN 7/16 male angle to N female

JBD1-S012-BAxx DIN 7/16 male angle to N male

JDA1-S012-BAxx DIN 7/16 female to N male angle

JDB1-S012-BAxx DIN 7/16 male to N male angle

N TO N

ARTICLE CONNECTORS

JDC1-S012-BAxx N male angle to N female

JDD1-S012-BAxx N male angle to N male


AISG DC Jumper Cable

AISG PIN ALLOCATION

PIN NUMBER AISG SIGNAL

1 +12 V DC Nominal (Optional)

2 -48 V DC Nominal (Optional)

3 RS485 B (Mandatory)

4 RS485 GND (Optional)

5 RS485 A (Mandatory)

6 10 to 30 V DC (Mandatory)

7 DC Return (Mandatory)

8 Not used (Optional)

ARTICLE NR AISG Male and Male Connectors

JAMM-DC01-BA01 AISG Male AISG Male





ARTICLE NR AISG Male and Female Connectors

JAMF-DC01-BA01 AISG Male AISG Female





COMMON FOR ALL

CABLE TYPE 6 cores Power Cable

ENVIRONMENTAL RoHs Compliant

OPERATING TEMPERATURE -55°C to +80°C

Revision A


EMP & GROUNDING Exir Telecom branded EMP protectors and grounding kits protect telecom sites

from lightning strikes and surges that damage equipment and cause system

breakdown. The products have been tested with a lightning pulse of 50 kA,

10/350 ms, and have passed without sustaining any damage or loss of perfor-

mance.

Thanks to our O-ring protection system, the grounding kits are water-pressure

proof down to 25 metres, which is equivalent to a pressure of 2.5 bar and far ex-

ceeds the requirements for IP68-classification. Consequently there is no need

for tape or any other external weatherproofing.

Exir branded EMP & Grounding

EMP Protectors, Triple Band

EMP Protectors, Gas discharge tube, DC-3000 MHz

EMP Protectors, Short circuit, 750 - 3000 MHz

Grounding Kits, Lightning Protection for Foam Dielectric Cables

Tool Kits

Grounding Kit, Lightning Protection for 1/2” Superflexible Foam Dielectric Cable

External Grounding Kits - Lightning Protection for Connectors


EMP ProtectorsTriple Band

PRODUCT FEATURES


� Designed to maintain high pressure oncontact surfaces to reduce

intermodulation



MOUNTING BRACKET

The EMP protector is available with grounding bracket for mounting di-rectly on grounding bars on request.


COMMON FOR ALL


1710 - 2170 MHz

VSWR / RETURN LOSS

806 - 890 MHz 1.17 / -22 dB

890 - 960 MHz 1.12 / -25 dB

1710 - 2200 MHz 1.12 / -25 dB

INTERMODULATION*

2 x 20 W Tx < -156 dBc

IMPEDANCE 50 ohm

SURGE CURRENT 100 kA

HANDLING CAPABILITY (test pulse 8/20 µs)

ENERGY test pulse 4 kV 1.2/50 µs

test pulse 2 kA 8/20 µs


DIMENSIONS 30 x 40 x 110 mm

H x W x D (1.17 x 1.56 x 4.29 in)


PIECES IN BOX 25

ARTICLE EMPP-0822-AA00 EMPP-0822-AB00 EMPP-0822-AC00 EMPP-0822-AD00

CONNECTORS DIN 7/16 female to RX/TX - DIN 7/16 male to RX/TX - N female to RX/TX - N male to RX/TX -

DIN 7/16 male to antenna DIN 7/16 female to antenna N male to antenna N female to antenna

INPUT POWER 600 W 600 W 150 W 150 W

EMP Protectors, Triple Band

Revision A


EMP ProtectorsGas discharge tube, DC - 3000 MHz

COMMON FOR ALL

FREQUENCY RANGE DC - 3000 MHz

VSWR / RETURN LOSS 1.22 / -20 dB

IMPEDANCE 50 ohm

DISCHARGE VOLTAGE 230 or 90 V*

IMPULSE DISCHARGE CURRENT

1 impulse (8/20 µs) 20 kA

5 impulses (8/20 µs) in 3 min 10 kA

IMPULSE SPARK OVER VOLTAGE <700 V (1 kV/µs)



H x W x D (2.67 x 1.33 x 1.33 in)


230 V WITH GROUNDING CABLE

ARTICLE EMPG-0030-AA00 EMPG-0030-AB00 EMPG-0030-AC00 EMPG-0030-AD00

CONNECTOR 7/16 f - 7/16 f 7/16 f - 7/16 m NF - NF NF - NM

230 V BULKHEAD MOUNTING

ARTICLE EMPG-0030-AE00 EMPG-0030-AF00 EMPG-0030-AG00 EMPG-0030-AH00


* 470 and 600 V available on request.

EMP Protectors, Gas discharge tube, DC-3000 MHz

Revision C

PRODUCT FEATURES

� DC-Pass

� AISG compliant

� Made of silver-plated brass

� Available with grounding cable or bulkhead mounting



90 V WITH GROUNDING CABLE

ARTICLE EMPG-0030-BA00 EMPG-0030-BB00 EMPG-0030-BC00 EMPG-0030-BD00


90 V BULKHEAD MOUNTING

ARTICLE EMPG-0030-BE00 EMPG-0030-BF00 EMPG-0030-BH00 EMPG-0030-BH00



EMP ProtectorsShort circuit, 750 - 3000 MHz

PRODUCT FEATURES


� Protected from both ways





intermodulation


COMMON FOR ALL



INTERMODULATION*

2 x 20 W Transmitter < -156 dBc

IMPEDANCE 50 ohm

SURGE CURRENT 100 kA

HANDLING CAPABILITY Test pulse 8/20 µs

ENERGY test pulse 4 kV 1.2/50 µs

test pulse 2 kA 8/20 µs

WEIGHT 400 g


H x W x D (4.44 x 1.33 x 1.33 in)


ARTICLE EMPP-0830-AK00 EMPP-0830-AM00 EMPP-0830-AL00

CONNECTOR 7/16 f - 7/16 M Nf - Nm 7/16 f - 7/16 f

INPUT POWER 600 W 150 W 600 W

Revision B

EMP Protectors, Short circuit, 750 - 3000 MHz


Grounding KitsLightning Protection for Foam Dielectric Cables

ARTICLE GROU-F012-AB00 GROU-F078-AB00 GROU-F114-AB00 GROU-F158-AB00

CABLE COMPATIBILITY Andrew LDF4-50 Acome HPL 50-7/8” flex Acome HPL 50-1 1/4 flex Acome HPL 50-158 flex

NK Cables RFA 1/2"-50 Acome HPL 50-7/8” LA Andrew LDF6-50 Andrew AVA7-50

Cellflex LCF 1/2" Cu2Y Acome M5423 7/8 UP Cablewave FLC 114 Andrew LDF7-50A

RFS LCF 1/2"-50 Cu2Y Andrew AVA5-50 Cellflex LCF 1 1/4” Cu2Y Cablewave FLC 158

Cablewave FLC 12 Andrew LDF5-50A Condumex RF 1 1/4”-50 Cellflex LCF 1 5/8" Cu2Y

Eupen 5128 Cablewave FLC 78 Eupen 5328 Condumex RF 1 5/8”-50

Acome HPL 50-1/2” flex Cellflex LCF 7/8” Cu2Y Eupen Hiflex EC6-50-HF Leoni FlexLine 1 5/8” R

Leoni FlexLine 1/2” R Cellflex LCF78-50JA Leoni FlexLine 1 1/4” R NK Cables RFA 1 5/8"-50

Condumex RF 1/2”-50 Condumex RF 7/8”-50 NK Cables RFA 1 1/4"-50 RFS LCF158-50JA

Eupen 5228 RFS LCFS114-50JA

Eupen 5228A EC5-50A



NK RFA 7/8”


HANSEN 7/8"

GROUND CONN. Cable clip, M5 Cable clip, M5 Cable clip, M5 Cable clip, M5

DIMENSIONS 50 x 25 x 32 mm 50 x 32 x 43 mm 50 x 43 x 57 mm 52 x 54 x 68 mm

H x W x D (front view) (1.97 x 0.98 x 1.26 in) (1.97 x 1.26 x 1.69 in) (1.97 x 1.69 x 2.24 in) (2.05 x 2.13 x 2.68 in)

CONTACT AREA >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²)

WEIGHT 242 g (0.53 lb) 306 g (0.66 lb) 424 g (0.94 lb) 556 g (1.23 lb)

CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in)

OPERATING TEMP. -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C

TOOL KITS CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0

Grounding Kits, Lightning Protection for Foam Dielectric Cables

Revision A

PRODUCT FEATURES

� Reusable

� Fast and easy installation

� Large contact surface area

� Fits multiple cable brands




PRODUCT PROFILE

Our Exir Telecom branded grounding kits feature an efficient design enabling multiple units

to be mounted very close together. A simple, adjustable construction allows for easy attach-

ment to a wide range of cables from various manufacturers. These grounding kits are reusable

and 100% weatherproof without the need for tape or any other external weatherproofing.

The contact surfaces are designed to closely fit the corrugated surface of the outer con-

ductor, thus avoiding unnecessary pressure. As a result, the effect of grounding on the

VSWR measurement of the antenna line is barely detectable.


Tool Kits

Mounting Grounding Kits

PRODUCT PROFILE

The Exir Telecom branded tool kits provide installers all they

need for installing grounding kits quickly and easily. Our ground-

ing devices require only one small opening in the cable jacket in

order to function properly. The opening is made using a hot tip

cutting tool together with a simple template. Fully illustrated

instructions are included with every grounding kit.

The complete tool kit includes a cordless, butane powered

cutting tool, one spare tip and templates. Additional cutting

tools and templates can be ordered separately as needed.

Note: The above photos illustrate the general installation procedure. Please visit www.exirtelecom.com for complete instructions on how to install grounding kits from Exir Telecom.

COMPLETE TOOL KIT

ARTICLE CONTENTS

CPKI-0000-C1 Cordless, butane powered cutting tool, spare tip and templates for 1/2”, 7/8”, 1 1/4” and 1 5/8” cables.

SINGLE TOOLS

ARTICLE CONTENTS

EJIG-F012-A0 Template for 1/2” cable

EJIG-F078-A0 Template for 7/8” cable

GTEM-F114-AA00 Template for 1 1/4” cable

GTEM-F158-AA00 Template for 1 5/8” cable

014-12015 Cordless, butane powered cutting tool with spare tip

1 2 3

4 5 6

Tool Kits

Revision A


Grounding Kit, Lightning Protection for 1/2” Superflexible Foam

Dielectric Cable

Grounding KitLightning Protection for 1/2” Superflexible Foam Dielectric Cable

ARTICLE GROU-S012-AA00


Andrew FSJ4-50B

Cablewave S-FLC 12



Leoni FlexLine 1/2” S

NK Cables RFF 1/2”-50


GROUND CONN. Cable clip, M5

CONTACT AREA >20 mm² (0.44 in²)



H x W x D (0.71 x 1.06 x 1.34 in)

CABLE LENGTH 600 mm (23.64 in)


Revision A

PRODUCT FEATURES

� Reusable



� Fits multiple cable brands


PRODUCT PROFILE

Exir Telecom branded grounding kits feature an efficient design enabling

multiple units to be mounted very close together. A simple, adjustable

construction allows for easy attachment to a wide range of cables from

various manufacturers. These grounding kits are reusable.

The contact surfaces are designed to closely fit the corrugated surface

of the outer conductor, thus avoiding unnecessary pressure. As a result,

the effect of grounding on the VSWR measurement of the antenna line

is barely detectable.


External Grounding KitsLightning Protection for Connectors

ARTICLE EXGR-F012-AA00 EXGR-F078-AA00 EXGR-F114-AA00 EXGR-F158-AA00

CONNECTOR xxxx-F012-G1 xxxx-F078-AE02 xxxx-F114-AD00 xxxx-F158-AD00

COMPATIBILITY xxxx-F012-H1 xxxx-F078-AF00

xxxx-F078-AG00

CONTACT AREA >25 mm2 (0.04 in2) >25 mm2 (0.04 in2) >25 mm2 (0.04 in2) >25 mm2 (0.04 in2)

CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in)

OPERATING TEMP. -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C

PIECES IN BOX 50 50 50 50

PRODUCT FEATURES

� Reusable

� Non-corrosive




� Made of silver-plated brass and stainless steel



PRODUCT PROFILE

The external grounding kit is designed to be mounted around the connector

and to cause the connector itself to function as a grounding device.

This solution is very easy to install and provides extra protection at the

feeder connector.

Revision A

External Grounding Kits

Lightning Protection for Connectors


CABLE CLAMPS Exir Telecom branded cable clamps make cable installation easier, saving you

valuable time. Moreover, they provide protection from the damage that high

winds inflict upon improperly fastened cables damage that may lead to in-

creased reflection due to mechanical stress. Our cable clamps are manufactured

of corrosion resistant stainless steel and are designed to achieve a perfect dis-

tribution of pressure on cables.

We offer cable clamps for use with flat, round and angle tower members, as well

as for wall attachment. Our clamps are convenient to carry and easy to mount

- features your installers will appreciate.

Exir branded Cable Clamps

Cable Clamps for Flat (1.5 - 23 mm) and Round (8 - 23 mm) Tower Members

Cable Clamps for 40 mm Angle Tower Members

Cable Clamp Single

Cable Clamp Double


Cable Clamps for Flat (1.5 - 23 mm) and Round (8 - 23 mm) Tower MembersCable ClampsFor Flat (3-25 mm) and Round (8-25 mm) Tower Members

STANDARD CLAMPS

1/2” CABLE

ARTICLE CABLE NO. OF CABLES

CL23-1C012-B0 1/2" 1

CL23-2C012-B0 1/2" 2

CL23-3C012-B0 1/2" 3

CL23-4C012-B0 1/2" 4

CL23-5C012-B0 1/2" 5

7/8” CABLE


CL23-1C078-B0 7/8" 1

CL23-2C078-B0 7/8" 2

CL23-3C078-B0 7/8" 3

CL23-4C078-B0 7/8" 4

CL23-5C078-B0 7/8" 5

1 1/4” CABLE


CL23-1C114-B0 1 1/4" 1

CL23-2C114-B0 1 1/4" 2

CL23-3C114-B0 1 1/4" 3

1 5/8” CABLE


CL23-1C158-B0 1 5/8" 1

CL23-2C158-B0 1 5/8" 2

CL23-3C158-B0 1 5/8" 3

Typical usage examples for clamps.

Revision A

PRODUCT FEATURES

� Made of stainless steel and U.V. resistent Fiberglass P.A.

� Fast and easy assembly

� Secured with wrench or hex key

� Various cable dimensions

� Supports up to 5 cable runs

� No need for adapters or drilling holes

� Minimises utilised space on towers, reducing wind load

� Protective interlayers safeguard against cable deformation

� For use with 3 - 25 mm (0.12 - 1.0 in) flat and 8 - 25 mm

(0.31 - 1.0 in) round members

1x.. 2x.. 3x.. 4x.. 5x..


Cable Clamps for 40 mm Angle Tower MembersCable Clampsfor 40 mm Angle Tower Members

STANDARD CLAMPS

1/2” CABLE


CL40-1C012-B0 1/2" 1

CL40-2C012-B0 1/2" 2

CL40-3C012-B0 1/2" 3

CL40-4C012-B0 1/2" 4

CL40-5C012-B0 1/2" 5

7/8” CABLE


CL40-1C078-B0 7/8" 1

CL40-2C078-B0 7/8" 2

CL40-3C078-B0 7/8" 3

CL40-4C078-B0 7/8" 4

CL40-5C078-B0 7/8" 5

1 1/4” CABLE


CL40-1C114-B0 1 1/4" 1

CL40-2C114-B0 1 1/4" 2

CL40-3C114-B0 1 1/4" 3

1 5/8” CABLE


CL40-1C158-B0 1 5/8" 1

CL40-2C158-B0 1 5/8" 2

CL40-3C158-B0 1 5/8" 3

Revision A

PRODUCT FEATURES

� Made of stainless steel and U.V. resistent Fiberglass P.A.


� Various cable dimensions


� Secured with wrench or hex key

� For use with 40 mm (1.57 in) angle members

� No need for adapters or drilling holes


� Protective interlayers safeguard against cable deformation

Typical usage examples for clamps.

1x.. 2x.. 3x.. 4x.. 5x..


Cable Clamp SingleCable Clamp Single

STANDARD CLAMPS

1/2” CABLE


CLS0-1C012-A0 1/2" 1

CLS0-2C012-A0 1/2" 2

CLS0-3C012-A0 1/2" 3

CLS0-4C012-A0 1/2" 4

7/8” CABLE


CLS0-1C078-A0 7/8" 1

CLS0-2C078-A0 7/8" 2

CLS0-3C078-A0 7/8" 3

CLS0-4C078-A0 7/8" 4

1 1/4” CABLE


CLS0-1C114-A0 1 1/4" 1

CLS0-2C114-A0 1 1/4" 2

CLS0-3C114-A0 1 1/4" 3

CLS0-4C114-A0 1 1/4" 4

1 5/8” CABLE


CLS0-1C158-A0 1 5/8" 1

CLS0-2C158-A0 1 5/8" 2

CLS0-3C158-A0 1 5/8" 3

CLS0-4C158-A0 1 5/8" 4

Revision A

PRODUCT FEATURES




PRODUCT PROFILE

Cable clamp single is a unit designed for safe simultaneous fixation of

coaxial cables on mountain surface. All components are specially con-

structed to work as a whole unit to support quick installation. No ad-

ditional parts for applying are required. All parts are manufactured ac-

cording to European standards. The clamps are made of environmental

protected plastic which provides UV resistance in all environments.


Cable Clamp Double

STANDARD CLAMPS

1/2” CABLE


CLD0-2C012-A0 1/2" 2

CLD0-4C012-A0 1/2" 4

CLD0-6C012-A0 1/2" 6

CLD0-8C012-A0 1/2" 8

7/8” CABLE


CLD0-2C078-A0 7/8" 2

CLD0-4C078-A0 7/8" 4

CLD0-6C078-A0 7/8" 6

CLD0-8C078-A0 7/8" 8

1 1/4” CABLE


CLD0-2C114-A0 1 1/4" 2

CLD0-4C114-A0 1 1/4" 4

CLD0-6C114-A0 1 1/4" 6

1 5/8” CABLE


CLD0-2C158-A0 1 5/8" 2

CLD0-4C158-A0 1 5/8” 4

CLD0-6C158-A0 1 5/8” 6

Cable Clamp Double

Revision A

PRODUCT FEATURES




PRODUCT PROFILE

Cable clamp double is a unit designed for safe simultaneous fixation of co-

axial cables on mountain surface. All components are specially constructed

to work as a whole unit to support quick installation. No additional parts

for applying are required. All parts are manufactured according to Euro-

pean standards. The clamps are made of environmental protected plastic

which provides UV resistance in all environments.


PASSIVES

The Exir Telecom branded high performance power splitters and tappers are made

from solid copper and silver-plated to provide the most consistent and reliable elec-

trical specifications. They are water-pressure proof down to 25 metres, which cor-

responds to a pressure of 2.5 bar and far exceeds the requirements for IP68-clas-

sification. This eliminates the need for tape or any other external weatherproofing.

The LEAX range of passives cover all frequencies are rated IP66 and a cost ef-

ficient alternative for indoor use.

Exir branded Passives

Tappers, Broadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz

Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz

Power Splitters, Hybrid 3 dB-coupler 1710 - 2170 MHz

3 dB Hybrid, 698 - 2690 MHz

2-Way Power Splitter, 790 - 2700 MHz

3-Way Power Splitter, 790 - 2700 MHz

4-Way Power Splitter. 790 - 2700 MHz

Absorbers, 100 W

Absorbers, 50 W

Absorbers, 25 W

Absorbers, 5 W

LEAX branded Passives

Directional Coupler, 380 - 2700 MHz

Directional Coupler, 698 - 2700 MHz (2 pages)

Wideband Power Splitter, 2/3/4-way, 380-2700 MHz

Wideband Reactive Power Splitter, 2/3/4-way, 698-2700 MHz


Hybrid Coupler, 698-2700 MHz

Attenuator, 2 - 200 W

Low PIM Attenuator, 698 - 2700 MHz

Dummy Load 50 W, 698 - 2700 MHzorbers

Dummy Load 100 W, 698 - 2700 MHz


PRODUCT FEATURES

� Extremely small

� Very low insertion loss



� EPDM O-rings eliminate water intrusion



In Out

Out ndB


Revision C

TappersBroadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz

ARTICLE DBCM-0602-AA00 / DBCM-0602-AA01

DBCM-0702-AA00 / DBCM-0702-AA01

DBCM-1002-AA00 / DBCM-1002-AA01

DBCM-1302-AA00 / DBCM-1302-AA01

DBCM-1502-AA00 / DBCM-1502-AA01

DBCM-2002-AA00 / DBCM-2002-AA01

CONNECTORS DIN 7/16 female / N female

DIN 7/16 female / N female





INPUT POWER 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W

PIECES IN BOX As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50

FREQUENCY RANGE 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz

790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz

COUPLING ATTENUATION

380 - 470 MHz -9 dB (13 % of Pin) -10 dB (10 % of Pin) -15 dB (3 % of Pin) -17 dB (2 % of Pin) -21 dB (0.8 % of Pin) -28 dB (0.15 % of Pin)

790 - 2700 MHz -6 dB (25 % of Pin) -7 dB (20 % of Pin) -10 dB (10 % of Pin) -13 dB (5 % of Pin) -15.1 dB (3 % of Pin) -20 dB (1 % of Pin)

OUTPUT PERCENTAGE 25 % / 75 % 20 % / 80 % 10 % / 90 % 5 % / 95 % 3 % / 97 % 1 % / 99 %

VSWR / RETURN LOSS

380 - 470 MHz 1.5 / 14 dB 1.5 / 15 dB 1.22 / 20 dB 1.12 / 25 dB 1.12 / 25 dB 1.12 / 25 dB

790 - 2700 MHz 1.5 / 14 dB 1.5 / 15 dB 1.22 / 20 dB 1.12 / 25 dB 1.12 / 25 dB 1.12 / 25 dB

INSERTION LOSS -0.05 dB -0.05 dB -0.05 dB -0.05 dB -0.05 dB -0.05 dB

IMPEDANCE 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm

INTERMODULATION*

2 x 20 transmitter < -156 dBc < -156 dBc < -156 dBc < -156 dBc < -156 dBc < -156 dBc

WEIGHT 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb)

DIMENSIONS 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm

H x W x D (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in)


Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz

Power SplittersHybrid n dB-coupler, 806 - 960 MHz

PRODUCT FEATURES

� Extremely good VSWR






COMMON FOR ALL

INPUT POWER 700 W



ISOLATION -33 dB

IMPEDANCE 50 ohm




H x W x D (5.32 x 3.55 x 1.96 in)

ARTICLE DBCM-0305-AA00 DBCM-0605-AA00 DBCM-1005-AA00 DBCM-1305-AA00

CONNECTORS DIN 7/16 female DIN 7/16 female DIN 7/16 female DIN 7/16 female

COUPLING ATTENUAT. 3 dB ±0.1 6 dB ±0.3 10 dB ±0.3 13 dB ±0.3

OUTPUT PERCENTAGE 50% / 50% 25% / 75% 10% / 90% 5% / 95%

Out

COMBINING SIGNALSFROM TWO TX / RXs

In

In

Absorber

In

SPLITTING SIGNALSFROM ONE TX / RX

Out

Out

Absorber

In

SPLITTING SIGNALSFROM TWO TX / RXs

Out

Out

In

Revision A


Power Splitters, Hybrid 3 dB-coupler 1710 - 2170 MHzPower SplittersHybrid 3 dB-coupler 1710 - 2170 MHz

PRODUCT FEATURES

� Extremely small

� Very low insertion loss






Out

COMBINING SIGNALSFROM TWO TX / RXs

In

In

Absorber

In

SPLITTING SIGNALSFROM ONE TX / RX

Out

Out

Absorber

In

SPLITTING SIGNALSFROM TWO TX / RXs

Out

Out

In

COMMON FOR ALL


COUPLING ATTENUAT. 3 dB ±0.15

OUTPUT PERCENTAGE 50% / 50%

RETURN LOSS -25 dB

ISOLATION -28 dB

IMPEDANCE 50 ohm




H x W x D (3.78 x 3.74 x 1.96 in)

ARTICLE DBCM-1722-AA01 DBCM-1722-AB01

CONNECTORS DIN 7/16 female N female

INPUT POWER 600 W 150 W

Revision A


3 dB Hybrid698 - 2690 MHz

3 dB Hybrid, 790-2700 MHz

Revision B

PRODUCT FEATURES

� High Performance

� High Reliability

� Low Noise Figure

� ROHS Compliant

� IP67-classified

ARTICLE DBCM-0727-AA00 DBCM-0727-AA01

ELECTRICAL


INSERTION LOSS ±0.8 dB

COUPLING VALUE 3.1 dB

VSWR 1.3:1 Max

ISOLATION 18 dB Min

POWER HANDLING 50 W

PIM (3rd Order 2*43dBm) -150 dBc typical

IN/OUT IMPEDANCE 50 Ohm nominal

ENVIRONMENTAL

OPERATING TEMPERATURE -20 to +70 °C

MECHANICAL

DIMENSIONS H x W x D

HYBRID 270 x 64 x 33 mm (10.63 x 2.52 x 1.30 in)

270 x 57 x 52 mm(10.63 x 2.24 x 2.04 in)

BRACKET 100 x 114 x 12 mm (3.94 x 4.49 x 0.47 in)

100 x 114 x 12 mm (3.94 x 4.49 x 0.47 in)

RF CONNECTOR N (F) 7/16 (f)

FINISH Grey colour epoxy coating


2-Way Power Splitter, 790 - 2700 MHz2-Way Power Splitter790 - 2700 MHz

PRODUCT FEATURES

� Made from silver-plated brass




Out

In

Side view

Out

ARTICLE AT2G-716F-AB00 AT2G-00NF-AB00

FREQUENCY RANGE 790 - 2700 MHz 790 - 2700 MHz

INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W


INPUTS/OUTPUTS 1/2 1/2

VSWR / RETURN LOSS 1.17 / -22 dB 1.17 / -22 dB

INSERTION LOSS <0.05 dB <0.05 dB

INTERMODULATION

2 x 20 W transmitter < -156 dBc < -156 dBc

IMPEDANCE 50 ohm 50 ohm

WEIGHT 500 g (1.1 lb) 500 g (1.1 lb)

OPERATING TEMPERATURE 55 °C to +80 °C 55 °C to +80 °C

DIMENSIONS 225 x 84 x 28 mm 240 x 92 x 28 mm

H x W x D (8.85 x 3.30 x 1.10 in) (9.44 x 3.62 x 1.10 in)

PIECES IN BOX 10 10

Revision A


3-Way Power Splitter, 790 - 2700 MHz3-Way Power Splitter790 - 2700 MHz

PRODUCT FEATURES




� IP68-classified and water-pressure proof tested down to 25 mOut

In

Side view

Out



INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W



VSWR / RETURN LOSS 1.17 / -22 dB 1.17 / -22 dB


INTERMODULATION



WEIGHT 500 g (1.1 lb) 500 g (1.1 lb)



H x W x D (9.3 x 3.6 x 2.7 in) (9.7 x 4.4 x 3.1 in)

PIECES IN BOX 10 10

33% Pout 33% Pout

Top view

33% Pout

3 OUTPUTS

Revision B


4-Way Power Splitter790 - 2700 MHz

PRODUCT FEATURES





In

Out

Side view

Out



INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W



VSWR / RETURN LOSS 1.17 / -22 dB 1.17/ -22 dB


INTERMODULATION



WEIGHT 500 g (1.1 lb) 500 g (1.1 lb)



H x W x D (9.3 x 3.6 x 3.6 in) (9.7 x 4.4 x 4.4 in)

PIECES IN BOX 10 10

25% Pout

25% Pout

Top view

25% Pout

25% Pout

4 OUTPUTS

4-Way Power Splitter. 790 - 2700 MHz

Revision B


Absorbers100 W

PRODUCT FEATURES

� Rohs compliant

COMMON FOR BOTH


INPUT POWER (at 25 °C) 100 W

IMPEDANCE 50 ohm

RETURN LOSS

0 - 1000 MHz 35 dB

1000 - 2500 MHz 32 dB

2500 - 3000 MHz 18 dB



H x W x D (4.93 x 5.32 x 4.93 in)

WEIGHT 2400 g (5.28 lb)

Absorbers, 100 W

Revision B

ARTICLE LDB0-0100-A0 LDB0-0100-B0 LDB0-0100-C0 LDB0-0100-D0

CONNECTOR DIN 7/16 female DIN 7/16 male N female N male


Absorbers, 50 W

Absorbers50 W

PRODUCT FEATURES

� Rohs compliant

� Available with BNC

COMMON FOR BOTH

FREQUENCY RANGE DC – 4000 MHz


PEAK POWER 5 kW

IMPEDANCE 50 ohm ± 2%

RETURN LOSS

0 - 2000 MHz 26 dB

2000 - 4000 MHz 20.8 dB

OPERATING TEMPERATURE -55 to +125°C


H x W x D (2.83 x 1.97 x 3.7 in)


ARTICLE LDB0-0050-A0 LDB0-0050-B0

CONNECTOR DIN 7/16 female DIN 7/16 male

Revision B


Absorbers25 W

PRODUCT FEATURES

� Rohs compliant

COMMON FOR BOTH



IMPEDANCE 50 ohm

RETURN LOSS

0 - 1000 MHz 35 dB

1000 - 2500 MHz 32 dB

2500 - 3000 MHz 18 dB



H x W x D (2.56 x 2.28 x 4.80 in)


Absorbers, 25 W

Revision B

ARTICLE LDB0-0025-AE00 LDB0-0025-AF00 LDB0-0025-AG00 LDB0-0025-AH00



Absorbers5 W

PRODUCT FEATURES

� Rohs compliant


COMMON FOR BOTH



IMPEDANCE 50 ohm

RETURN LOSS

0 - 1000 MHz 35 dB

1000 - 2500 MHz 32 dB

2500 - 3000 MHz 18 dB


DIMENSIONS Length 72 - 74 mm (2.84 - 2.91 in)

Ø 32 mm (1.25 in)

WEIGHT 180 g (0.39 lb) - 185 g (0.40 lb)

ARTICLE LDB0-0005-A0 LDB0-0005-B0 LDB0-0005-C0 LDB0-0005-D0


Absorbers, 5 W

Revision A



Directional Coupler380 - 2700 MHz

TECHNICAL SPECIFICATIONS

ELECTRICAL DCXX-0327-CA01


INPUT POWER ≤ 300 W

COUPLING VALUE 6 dB 10 dB 15 dB 20 dB 30 dB

COUPLING TOLERANCE ±0.8 dB ±1.0 dB ±1.2 dB ±1.5 dB ±1.5 dB

INSERTION LOSS ≤ 1.7 dB ≤ 0.8 dB ≤ 0.45 dB ≤ 0.22 dB ≤ 0.2 dB

ISOLATION > 18 dB

INPUT PORT VSWR < 1.25

PIM ≤-140 dBc @ 2x43 dBm

IMPEDANCE 50 Ohm

PRODUCT FEATURES

� Operating frequency range from 380 - 2700 MHz.

� 6, 10, 15, 20 & 30 dB coupling value.

� 300 W average main line power handling capability.

� Suitable for both indoor and outdoor applications.

� Low PIM

� RoHS Compliant.

MECHANICAL

DIMENSIONS, (L x W x H) 268 x 62 x 23 mm (10.6 x 2.4 x 0.9 in)

WEIGHT 0.4 kg (0.9 lb)

MATERIAL Aluminum

INNER PLATING Silver

CONNECTOR TYPE N-Female

OPERATIONAL TEMPERATURE -40 to +80°C

OPERATIONAL HUMIDITY < 95%

ENVIRONMENTAL CLASS Indoor/Outdoor IP65

OUTLINE DRAWING

Revision A



TECHNICAL

ELECTRICAL 5 dB 6 dB 7 dB 8 dB 10 dB 13 dB 15 dB 20 dB



COUPLING VALUE 5±0.8 dB 6±0.8 dB 7±0.8 dB 8±0.8 dB 10±1 dB 13±1 dB 15±1 dB 20±1 dB

MAIN LINE LOSS ≤ 2.3 ≤ 1.7 ≤ 1.5 ≤ 1.2 ≤ 0.8 ≤ 0.5 ≤ 0.4 ≤ 0.3

DIRECTIVITY > 20


PIM ≤-140 @2x43dBm

IMPEDANCE 50 Ohm

PRODUCT FEATURES

� Wideband designed for operating in all frequency bands from

698 - 2700 MHz.

� 200 W power handling capability.

� Low loss, flat coupling and high inter-modulation.

� Available with 7/16 DIN or Type N connector.

� Suitable for both outdoor and indoor application.

MECHANICAL

DIMENSIONS, (L x W x H)Type N-F: 141 x 55 x 23 mm (5.6 x 2.2 x 0.9 in)

7/16 DIN-F: 156 x 66 x 36 mm (6.1 x 2.6 x 1.4 in)

WEIGHTType N-F: 0.30 kg (0.7 lb)

7/16 DIN-F: 0.75 kg (1.7 lb)

MATERIAL Aluminum




OUTLINE DRAWING

Page 1 (2)

Revision A




PRODUCT FEATURES

� Wideband designed for operating in all frequency bands

from 698 - 2700 MHz.

� 200 W power handling capability.

� Low loss, flat coupling and high inter-modulation.

� Available with 7/16 DIN or Type N connector.

� Suitable for both outdoor and indoor application.

MECHANICAL

DIMENSIONS, (L x W x H)Type N-F: 141 x 59 x 23 mm (5.6 x 2.3 x 0.9 in)

7/16 DIN-F: 156 x 70 x 36 mm (6.1 x 2.8 x 1.4 in)

WEIGHTType N-F: 0.40 kg (0.9 lb)

7/16 DIN-F: 0.85 kg (1.9 lb)

MATERIAL Aluminum




OUTLINE DRAWING

Revision A

TECHNICAL

ELECTRICAL 30 dB 40 dB



COUPLING VALUE 30±1.2 dB 40±1.5 dB

MAIN LINE LOSS ≤ 0.2 dB

ISOLATION < 33 > 43


PIM ≤-140 @2x43dBm

IMPEDANCE 50 Ohm

Page 2 (2)

ORDERING INFORMATION

7/16 DIN TYPE N-F TYPE

DCXX-0627-CA00 DCXX-0627-CA01


Wideband Power Splitter2/3/4-way, 380 - 2700 MHz

PRODUCT FEATURES

� Wideband covering 380-2700 MHz

� 500 W input power handling capability

� Suitable for both indoor and outdoor applications

� Low PIM

� High reliability

� RoHS Compliant

Revision A

TECHNICAL

ELECTRICAL AT2G-0327-CA01 AT3G-0327-CA01 AT4G-0327-CA01

NO. OF WAYS 2-way 3-way 4-way


AVERAGE POWER, MAXIMUM 500 W

SPLITTING LOSS 3.3 dB 5.1 dB 6.4 dB

VSWR < 1.20 : 1 < 1.25 : 1 < 1.25 : 1

3RD ORDER INTERMODULATION @ 2 × 43 DBM CARRIER ≤ -150

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (L x W x H) 479 x 61 x 25 mm(18.9 x 2.4 x 1.0 in)

497 x 61 x 25 mm(19.6 x 2.4 x 1.0 in)

497 x 61 x 43 mm(19.6 x 2.4 x 1.0 in)

WEIGHT 0.67 kg 0.7 kg 0.75 kg

MATERIAL Aluminium



OPERATIONAL HUMIDITY ≤95%


OUTLINE DRAWING

Wideband Power Splitter, 2/3/4-way, 380-2700 MHz


Wideband Reactive Power Splitter2/3/4-way, 698 - 2700 MHz

PRODUCT FEATURES

� Wideband covering 698 - 2700 MHz



� Low loss, flat response and even output.


� RoHS Compliant

Revision A

TECHNICAL





PEAK POWER 3000 W


IN-BAND RIPPLE ≤ 0.2 dB

INSERTION LOSS ≤ 0.1 dB


PIM ≤ -150 dBc @2x43dBm

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (L x W x H) 214.8 x 60.6 x 25 mm 269.4 x 60.6 x 25 mm 270.6 x 60.6 x 42.8 mm


MATERIAL Aluminium




MOUNTING Wall mounted bracket provided



OUTLINE DRAWING



Wideband Reactive Power Splitter2/3/4-way, 698 - 2700 MHz

PRODUCT FEATURES



� Low loss, flat response and even output.


� RoHS Compliant

Revision A

TECHNICAL





PEAK POWER 1500 W


IN-BAND RIPPLE ≤ 0.3 dB ≤ 0.4 dB



PIM ≤ -153 dBc @2x43dBm

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (L x W x H) 229.9 x 81.4 x 38 mm 248.1 x 81.4 x 38 mm 270.6 x 80.2 x 38 mm


MATERIAL Aluminium


CONNECTOR TYPE Din-Female




OUTLINE DRAWING



Hybrid Coupler698 - 2700 MHz

Revision A

TECHNICAL TECHNICAL

ELECTRICAL


INPUT POWER 150 W max at each port


COUPLING VALUE 3.1 dB

COUPLING TOLERANCE ±0.5 dB

ISOLATION BETWEEN BANDS ≥ 23*

VSWR ≤ 1.2*

IMPEDANCE 50 Ohm

PRODUCT FEATURES

� Designed for operating in wide frequency band 698 - 2700 MHz.

� Compact and cost effective solution for combining two bands.

� Low insertion loss and good PIM performance.

� Integrating two operators’ services into an existing in-building

antenna distribution system.

* Valid if all ports are terminated with 50Ω load.

MECHANICAL

MECHANICAL

7/16 DIN-FEMALE 133 x 90 x 38 mm (5.2 x 3.5 x 1.5 in)

TYPE N-F 133 x 76 x 25 mm (5.2 x 3.0 x 1.0 in)

WEIGHT

7/16 DIN-FEMALE 1.0 kg (2.2 lb)

TYPE N-F 0.5 kg (1.1 lb)

MATERIAL Aluminum



ENVIRONMENTAL CLASS Indoor/Outdoor (IP65)

OUTLINE DRAWING


7/16 DIN TYPE N TYPE

DBCM-0627-CA00 DBCM-0627-CA01

Hybrid Coupler, 698-2700 MHz


Attenuator2 W - 200 W

PRODUCT FEATURES

� Used in absorbing energy of transmission line

� Wide Frequency Band

� Low VSWR


� RoHS Compliant

Revision A

MODEL NUMBER AVERAGE POWER (W)

PEAK POWER (KW)

MAX VSWR

NOMINAL ATTENUATION VALUE (DB)

CONNECTOR TYPE

DIMENSIONS (MM)

WEIGHT (G)

FREQUENCY RANGE (GHZ)

AT02-0/10DB-NF/NF (Adjustable Attenuator With N Female Connector) 2 0.5 1.50 0~10 dB Adjustable N 106 x 35 x 20 110 DC~3

AT02-XXDB-NM/NF 2 0.5 1.20 1~40 N Ø20 x 70 65 DC~3

AT02-XXDB-SM/SF 2 0.5 1.15 1~30 SMA Ø10 x 30 10 DC~3

AT05-XXDB-NM/NF 5 0.5 1.20 1~40 N Ø20 x 70 65 DC~3

AT05-XXDB-SM/SF 5 0.5 1.20 1~40 SMA Ø20 x 70 65 DC~3

AT10-XXDB-NM/NF 10 1 1.20 1~40 N Ø38 x 83 120 DC~3

AT25-XXDB-NM/NF 25 1 1.20 1~50 N Ø38 x 83 120 DC~3

AT50-XXDB-NM/NF 50 10 1.30 1~40 N130 x 60 x 60 or Ø63 x 112

510 or 325 DC~3

AT100-XXDB-NM/NF 100 10 1.30 1~50 N 230 x 80 x 60 1800 DC~3

AT200-XXDB-NM/NF 200 10 1.35 1~50 N 267 x 98 x 60 2800 DC~3


Note:Dimension Tolerance is ±2%, it refer to connector type N unless otherwise specified.Custom designs available. Connector type (DIN, N, SMA); Low PIM; IP rating.etc.Operating Temperature: -45°C ~ +125°C


Low PIM Attenuator698 - 2700 MHz

ELECTRICAL AT15-100-0627-NFNF

FREQUENCY 698 - 2700 MHz

ATTENUATOR VALUES 15 dB

ATTENUATOR ACCURACY ±1.5 dB

POWER HANDLING 100 W

VSWR ≤ 1.25

INTERMODULATION ≤ -155 dBc @ (3rd order with 2 x 20 W)

IMPEDANCE 50 Ohm

ENVIRONMENT & MECHANICAL

TEMPERATURE RANGE -55°C ~ +125°C

HUMIDITY 5% ~ 95%

APPLICATIONS IP65

CONNECTOR N-Female & N-female


WEIGHT 3.5 kg

PACKING 1 pcs/box

Revision A


Dummy Load 50 W698 - 2700 MHz

ELECTRICAL LDB0-0050-B01

FREQUENCY DC - 3000 MHz

VSWR ≤ 1.25

INTERMODULATION ≤ -150 dBc @ 2 x 43 dBm

POWER HANDLING 50 W

IMPEDANCE 50 Ohm


WORKING TEMPERATURE -25°C ~ +75°C

CONNECTOR DIN-M

DIMENSIONS see technical drawing

COLOR Black

Revision A


Dummy Load 100 W698 - 2700 MHz

ELECTRICAL LDB0-0100-B01

FREQUENCY DC - 3000 MHz

VSWR ≤ 1.25

INTERMODULATION ≤ -160 dBc @ 2 x 43 dBm


IMPEDANCE 50 Ohm


WORKING TEMPERATURE -25°C ~ +75°C

CONNECTOR DIN-M

DIMENSIONS see technical drawing

COLOR Black

Revision A


COMBINERS Our combiners and diplexers are small and easy to install. This minimizes down-

time during integration with existing antenna line systems, which in turn helps

operators avoid loss of income. High quality O-rings provide built-in weather pro-

tection and eliminate the need for external weatherproofing.

Our combiners are milled from solid brass and silver-plated to obtain better elec-

trical performance. Exceptional isolation characteristics of 50 dB or better ef-

fectively reduce disturbances from neighboring systems. In addition, we have

completely avoided soldering in order to eliminate the risk of cracking that can

occur with soldered joints over time. Please enquire if you need a bespoke filter.

Exir branded Diplexers

Diplexer, 806 - 960 and 1710 - 2170 MHz

Diplexer, 1710 - 2170 and 2300 - 2690 MHz

Rejection Filter, 800 MHz

LEAX branded Diplexers

Outdoor Dual Band Combiner, 790 - 862 and 880 - 960 Mhz

Outdoor Dual Band Combiner, 1710 - 1880 and 1920 - 2170 MHz


Outdoor Tri-Band Combiner, 380 - 960, 1710 - 1880 and 1920 - 2170 MHz

Outdoor Tri-Band Combiner, 380 - 960, 1710 - 2170 and 2300 - 2690 MHz

Wide-Band Diplexer, 1710 - 2170 and 2400 - 2700 MHz

Outdoor Quad-Band Combiner, 380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz

Combiner, 300 - 470 and 880 - 960 MHz


Diplexer806 - 960 and 1710 - 2170 MHz

ELECTRICAL CHARACTERISTICS

COMMON FOR ALL


1710 - 2170 MHz

INPUT POWER 400 W

INTERMODULATION


IMPEDANCE 50 ohm


INSERTION LOSS < 0.2 dB

ISOLATION

806 - 960, 1710 - 2170 MHz > 40 dB

820 - 960, 1710 - 2170 MHz > 50 dB

CONNECTORS DIN 7/16 female

DC-PASS ON ALL PORTS DC-BLOCK ON 806-960 MHz

DIPLEXER COMM-0918-AB01 COBL-0918-AA00

WEIGHT 2100 g (4.6 lb) 2100 g (4.6 lb)


H x W x D (8.27 x 5.51 x 0.87 in) (8.27 x 5.51 x 0.87 in)

DIPLEXER W. BRACKET COMM-0918-AD00 COBL-0918-AD00

WEIGHT 2400 g (5.3 lb) 2400 g (5.3 lb)


H x W x D (8.27 x 5.51 x 1.26 in) (8.27 x 5.51 x 1.26 in)

DUAL DIPLEXER W. BRACKET

COMM-0918-AC00 COBL-0918-AC00

WEIGHT 4500 g (9.9 lb) 4500 g (9.9 lb)


H x W x D (8.27 x 5.51 x 3.15 in) (8.27 x 5.51 x 3.15 in)

PRODUCT FEATURES

� Low insertion loss

� No soldered parts


� Mounting on wall or on poles in various dimensions


� DC and AISG Issue 2.0 Passthru on selected ports


PRODUCT PROFILE

The Exir Telecom branded diplexer has been developed to keep

intermodulation products at the lowest possible level. The

filter is milled from one solid piece and has no soldered parts.

Diplexer, 806 - 960 and 1710 - 2170 MHz

Revision C


Diplexer1710 - 2170 and 2300 - 2690 MHz

ARTICLE COMD-1727-Axyz

COMMON FOR ALL

PASS BAND 1 1710 - 2170 MHz

PASS BAND 2 2300 - 2690 MHz

IMPEDANCE 50 Ohm

VSWR ≤ 1.19:1 / 21 dB

INSERTION LOSS 0.20 dB max (0.15 dB typical)

ISOLATION > 50 dB

PIM3 (2 x 20 W carrier) < -156 dBc

INPUT POWER 400 W

ENVIRONMENTAL


WATERPROOF IP67

MECHANICAL

WEIGHT 1500 g (3.31 lb)

DIMENSIONS (H x W x D) 142.5 x 96 x 48 mm

FILTER INCLUDING BRACKET (5.61 x 3.78 x 1.89 in)

CONNECTORS DIN 7/16 female

COLOR Powder coating, Color NCS 1502-R

MOUNTING Mounting brackets for poles and walls

GROUNDING Tapped hole or bolt M6

COMD-1727-Axyz

x y z

Single = 1 No bracket = 0 DC block all ports = 1

Dual = 2 Bracket = 1 DC 1710 - 2170 MHz port = 2

DC 2300 - 2690 MHz port = 3

DC all ports = 4

Revision A

PRODUCT FEATURES

� Rohs compliant

� Very compact


� Long neck connectors

� DC and AISG Issue 2.0 Passthru on selected ports

� Mounting on wall or on poles in various dimensions



ARTICLE EXT-P11062-X

ELECTRICAL

FREQUENCY RANGE 791- 801 MHz and 832 - 842 MHz

BAND WIDTH 10 MHz / 10 MHz

INSERTION LOSS

≤ 1.2 dB typical, 1.8 dB max. @ 791 - 792 MHz

≤ 0.8 dB @ 792 - 801 MHz

≤ 0.35 dB @ 832 - 842 MHz max.

RETURN LOSS 18 dB min.

REJECTION > 15 dB typical, 12 dB min. @ <790 MHz

POWER HANDLING 200 W, average

PEAK POWER 1000 W

IMPEDANCE 50 Ohm nominal

DC AND AISG No pass

ENVIRONMENTAL

OPERATING TEMPERATURE RANGE -33°C to +60°C

STORAGE TEMPERATURE RANGE -45°C to +85°C

RELATIVE HUMIDITY 5% - 95%

APPLICATIONS Outdoor

WATERPROOF IP67

MECHANICAL

WEIGHT 4500 g (single)

DIMENSIONS H x W x D 300 x 190 x 127 mm, excluding brackets and connectors

CONNECTOR DIN 7/16 female, long neck (38 mm) and with EPDM rubber

MATERIAL Aluminium

COLOR Powder coating, color NCS 1502-R

PROTECTION GROUND M8 screw

BRACKETS AND CLAMPS SS304 or SS316 / passive

PRODUCT FEATURES



Rejection Filter, 800 MHzCo-location mobile network with digital broadcasting system

X

Single = 1

Dual = 2

Revision B

Rejection Filter, 800 MHz


Outdoor Dual-band Combiner790 - 862 and 880 - 960 MHz

Diplexer, 1710-188 and 1920 - 2170 MHz

Revision A

ARTICLE COMD-0809-CXXX

ELECTRICAL


INSERTION LOSS ≤0.4 dB

ISOLATION BETWEEN PORTS ≥50 dB

RETURN LOSS ≥18 dB

MAXIMUM INPUT POWER PER PORT 200 W

INTERMODULATION PRODUCTS ≤-155 dBc @ 2x43 dBm

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS (L x W x H), excluding connectors and mounting bracket

Single unit: 188 x 176 x 68 mm (7.4 x 6.9 x 2.7 in)

Double units: 188 x 176 x 138 mm (7.4 x 6.9 x 5.4 in)

WEIGHT, including connectorsand mounting bracket

Single unit: 2.4 kg (5.3 lb)

Double units: 5.0 kg (11.0 lb)

COLOR Light Grey

RF CONNECTORS 7/16 DIN-Female

MOUNTING KITS Pole (clamps included for ø 35-125 mm Pole) or Wall mounted

OPERATING TEMPERATURE RANGE -40 to +65°C


ENVIRONMENT CLASS IP66

SHIPPING DIMENSIONS (L x W x H)Single unit:350 x 250 x 130 mm (13.8 x 9.8 x 5.1 in)


SHIPPING WEIGHTSingle unit: 2.9 kg (6.4 lb)


LIGHTNING PROTECTION Comply with IEC 61000-4-5; 8kA, 8/20 µs

MTBFSingle unit: >1,000,000 h

Double units: >500,000 h

BLOCK DIAGRAM

PRODUCT FEATURES

� Co-siting purpose for feeder sharing

� Built with optional DC bypass, to be used with Tower Mounted Amplifiers and AISG devices

� High isolation – minimizes interference

� High power handling and low loss – maximizes system performance

� Built-in lightning protection

� Available as a single unit or double unit


SINGLE UNIT MODEL NUMBER DOUBLE UNITS MODEL NUMBER DC BYPASS OPTIONAL

COMD-0809-CA00 COMD-0809-CD00 No DC Bypass

COMD-0809-CA01 COMD-0809-CD01 DC Bypass @790 - 862

COMD-0809-CA02 COMD-0809-CD02 DC Bypass @880 - 960

COMD-0809-CA03 COMD-0809-CD03 Full DC Bypass


Outdoor Dual Band Combiner1710 - 1880 and 1920 - 2170 MHz

Revision A


ELECTRICAL







IMPEDANCE 50 Ohm

MECHANICAL







COLOR Light Grey





ENVIRONMENT CLASS IP66 (Indoor or Outdoor)

SHIPPING DIMENSIONS (L x W x H)Single unit: 445 x 240 x 265 mm (17.5 x 9.4 x 10.4 in)




LIGHTNING PROTECTION Comply with IEC 61000-4-5; 8kA, 8/20µs



BLOCK DIAGRAM

PRODUCT FEATURES

� Enables feeder sharing between DCS1800 and UMTS system


� 500 W maximum output power rating


� Build with optional DC bypass, to be used in applications with or without

Tower Mounted Amplifiers installed

� Available as a single unit or double unit




COMD-1722-CA01 COMD-1722-CD01 DC Bypass @1710-1880





BLOCK DIAGRAM

Outdoor Dual Band Combiner380 - 960 and 1710 - 2700 MHz

Revision A


ELECTRICAL





MAXIMUM INPUT POWER PER PORT 500 W 300 W


IMPEDANCE 50 Ohm

MECHANICAL







COLOR Light Grey













BLOCK DIAGRAM

PRODUCT FEATURES

� Extra wideband design for feeder sharing between systems in 380-960 MHz

and 1710-2700 MHz range

� Long connectors allow ease of waterproofing


� Built with optional DC bypass, to be used with Tower Mounted Amplifiers

and AISG compliant devices









Outdoor Tri-band Combiner380 - 960, 1710 - 1880 and 1920 - 2170 MHz

Revision A


ELECTRICAL

FREQUENCY RANGE 380 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz

INSERTION LOSS ≤0.2 dB ≤0.3 dB

ISOLATION BETWEEN BANDS ≥60 dB




IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS (L x W x H), excluding connectorsand mounting bracket

Single unit: 220 x 180 x 50.5 mm (8.7 x 7.1 x 2.0 in)





COLOR Light Grey












Double units: >500,000

BLOCK DIAGRAM

PRODUCT FEATURES

� Designed for feeder sharing and co-location purpose

� High power handling and low loss-maximizes system performance

� 750 W maximum output power rating

� High isolation-minimizes interference

� Built with optional DC (AISG signals) bypass



COMT-0322-CA00 COMT-0322-CD00 No DC Bypass

COMT-0322-CA01 COMT-0322-CD01 DC Bypass @380-960



COMT-0322-CA04 COMT-0322-CD04 Full DC Bypass

Outdoor Tri-band Combiner, 380 - 960, 1710 - 1880 and 1920 - 2170 MHz


BLOCK DIAGRAM

Outdoor Tri-band Combiner380 - 960, 1710 - 2170 and 2300 - 2690 MHz

Revision A


ELECTRICAL



ISOLATION BETWEEN PORTS≥60 dB (380 - 960 / 1710 - 2170 MHz) ≥60 dB (380 - 960 / 2300 - 2690 MHz)

≥55 dB (1710 - 2170 / 2300 - 2690 MHz)




IMPEDANCE 50 Ohm

MECHANICAL







COLOR Light Grey













BLOCK DIAGRAM

PRODUCT FEATURES


� High power handling and low loss-maximizes system performance

� High isolation-minimizes interference

� Built with optional DC (AISG signals) bypass, to be used with Tower Mounted

� Amplifiers and AISG compliant devices



COMT-0327-CA00 COMT-0327-CD00 No DC Bypass




COMT-0327-CA04 COMT-0327-CD04 Full DC Bypass

Outdoor Tri-band Combiner, 380 - 960, 1710 - 2170 and 2300 - 2690 MHz


Wide-band Diplexer1710 - 2170 and 2400 - 2700 MHz

PRODUCT FEATURES

� Wide-band design enables feeder sharing between systems in the 1710-2170 MHz

range and the 2400-2700 MHz range.

� Long connectors allow ease of waterproofing.

� High power handling and low loss – maximizes system performance.

� High isolation – minimizes interference.

� Built with full band DC bypass, to be used with Tower Mounted Amplifiers and AISG

compliant devices.

Revision A


ELECTRICAL


INSERTION LOSS ≤0.2 dB ≤0.2 dB

ISOLATION BETWEEN BANDS ≥ 50 dB

RETURN LOSS ≥ 20 dB

POWER HANDLING CONTINUOUS ≤ 250 W

POWER HANDLING CONTINUOUS @ COMMON PORT 500 W average

INTERMODULATION PRODUCTS ≤ -155 dBc @2 x 43dBm

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (L x W x H) (including mounting brackets) 179 x 121 x 49.5 mm (7.0 x 4.8 x 1.9 in)


COLORS Light Grey

HOUSING Aluminum

RF CONNECTORS DIN 7/16 female

MOUNTING KITSPole (clamps included for ø 35-

125mm) or wall mounted

ENVIRONMENTAL



ENVIRONMENTAL CLASS IP66 (Indoor or Outdoor)

EMC ETS 300 342-3


MTBF > 1.000.000 h

BLOCK DIAGRAM


SINGLE DOUBLE

COMD-1727-CAyz COMD-1727-CDyz

Wide-band Diplexer, 1710 - 2170 and 2400 - 2700 MHz


ENVIRONMENTAL



ENVIRONMENTAL CLASS IP66 (Indoor or Outdoor)

EMC ETS 300 342-3


MTBF > 1.000.000 h

Outdoor Quad-band Combiner380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz

Revision C


ELECTRICAL

FREQUENCY RANGE 380 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz 2500 - 2690 MHz






IMPEDANCE 50 Ohm

MECHANICAL







COLOR Light Grey













BLOCK DIAGRAM

PRODUCT FEATURES




� Built with full band DC bypass, to be used with Tower Mounted Amplifiers

and AISG compliant devices



COMQ-0327-CA00 COMQ-0327-CD00 No DC Bypass

COMQ-0327-CA01 COMQ-0327-CD01 DC Bypass @380-960




COMQ-0327-CA05 COMQ-0327-CD05 Full DC Bypass

Outdoor Quad-band Combiner, 380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz


Combiner300 - 470 and 880 - 960 MHz

PRODUCT FEATURES

� High Performance

� High Reliability

� RoHS Compliant

ARTICAL COMD-0409-A0XX

ELECTRICAL LOW HIGH



RETURN LOSS ≥ 18 dB

ISOLATION ≥ 50 dB

POWER 200 W

PIM 150 dBc

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (excluding brackets) 275 x 108 x 49 mm

RF CONNECTORS DIN female

FINISH Grey colour

ENVIRONMENTAL


OUTLINE DRAWING

Revision A


OUTLINE DRAWING

REPEATERS We offer a range of low power repeater solutions on all bands, for indoor use.

Our indoor repeaters are designed to be easily installed and set up on-site. The

repeaters incorporate digital isolation cancellation to avoid antenna oscillation.

If the gain is set too high and if signal and donor antennas are placed to closely

together the repeater will automatically decrease the gain level.

LEAX branded Repeaters

WCDMA Digital Band Selective Repeater, 2100 MHz

Digital Channel Selective Repeater, GSM 1800 MHz


WCDMA Digital Channel Selective Repeater, 2100 MHz

Bandwidth Adjustable Pico Repeater, GSM 900 MHz

Coverage Maintenance System, CMS v8.2

Digital Band Selective Repeater, 1800 MHz

Digital Band Selective Repeater, GSM 900 MHz

LTE Band Selective Repeater, 2600 MHz

WCDMA Digital PICO Repeater, 1920 - 1980 & 2110 - 2170 MHz

GSM1800 Bandwidth Adjustable Pico Repeater, 1805 – 1855 or 1855 – 1880 & 1710 – 1760 or 1760 – 1785 MHz


TECHNICAL SPECIFICATIONS RP21-BAxx-CA00

ELECTRICAL 1 W 2 W 5 W 10 W 20 W

FREQUENCY RANGE, UPLINK 1920 – 1980

FREQUENCY RANGE, DOWNLINK 1920 – 1980

SUB-BANDS 4

BANDWIDTH 1~3 carriers adjustable

INSTANTANEOUS BANDWIDTH 30 MHz

TOTAL OUTPUT POWER, UPLINK 23 dBM

TOTAL OUTPUT POWER, DOWNLINK 30 33 37 40 43

MAXIMUM SYSTEM GAIN 90

GAIN ADJUSTMENT RANGE 0 - 30 dB

SYSTEM NOISE FIGURE AT MAX. SYSTEM GAIN

≤ 5 dB

OUT-OF-BAND GAIN @ MAXIMUM BANDWIDTH

Compliance with 3GPP TS 25 106

INTERMODULATION

SPURIOUS EMISSION

EVM

ACRR

PCDE

SPURIOUS EMISSION MASK

SYSTEM GROUP DELAY ≤ 6.5 μsec

ABSOLUTE MAXIMUM RF INPUT POWER

-10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

WCDMA Digital Band Selective Repeater2100 MHz

PRODUCT FEATURES

� Friendly and easy OMT interface via RJ45 connection

� Integrated WCDMA wireless modem for remote configuration,

monitoring and control

� Internal backup battery keeps the alarm unit running for up to two

hours after power failure

� Optional OMC is available for remote operation and maintenance of

agroup of repeaters

� Designed for all weather outdoor installation – waterproof, damp-

proof and omni-sealed (IP65)

� Compliance with 3GPP

POWER, MECHANICAL & ENVIRONMENTAL

DIMENSIONS, (H x W x D) 430 x 300 x 164 mm

WEIGHT (APPROX.) 18 Kg

POWER SUPPLY 100 – 240 / 47 – 63 Hz

POWER CONSUMPTION (APPROX.) 130 140 150 160 180

POWER UP WAITING TIME (APPROX.) 180 sec

MCU BATTERY BACKUP TIME (APPROX.) 2 hr

ENCLOSURE COOLING Convection

RF CONNECTORS N-Female


OPERATING HUMIDITY ≤ 95%

ENVIRONMENTAL CLASS IP65

MTBF ≥ 50,000

Revision A

WCDMA Digital Band Selective Repeater, 2100 MHz


TECHNICAL SPECIFICATIONS RP18-CS40-CA00

ELECTRICAL



INSTANTANEOUS BANDWIDTH 25

NUMBER OF CHANNELS 4 or 8 or 12

TOTAL OUTPUT POWER, UPLINK 33 dBm

TOTAL OUTPUT POWER, DOWNLINK 40 dBm



FEEDBACK CANCELLATION 30 dB

CHANNEL SELECTIVITY

@ ±400 KHz > 50 dB

@ ±600 KHz > 55 dB

@ ±1 MHz > 60 dB

INTERMODULATION ≤ 45 dBc

IN BAND SPURIOUS

1710-1785 /1805-1880 MHz ≤ 60 dBc

OUT OF BAND SPURIOUS EMISSION

9 KHz to 1 GHz ≤ 36 dBm

1 GHz to 12.75 GHz ≤ 30 dBm

SYSTEM NOISE FIGURE @ MAXIMUM GAIN

≤ 5 dB

SYSTEM GROUP DELAY ≤ 11 μsec


-10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

Digital Channel Selective RepeaterGSM 1800 MHz

PRODUCT FEATURES

� Support up to 12 GSM Channels

� Digitalized Antenna Feedback Cancellation (AFC) function to

reduce the antenna isolation requirement up to 30 dB

� Dynamic Uplink Noise Control (UNC) function to reduce Uplink

Interference by automatically switch off the corresponding carriers

when no traffic

� Support carrier tracing

� 10 W Downlink Output Power utilizing ultra Linear PA, supports

GSM, GPRS and EDGE

� With built-in GSM modem, supports remote alarm monitoring and

configuration based on the unified OMT / OMC platform

� IP65 Chassis, designed for all outdoor application – waterproof,

damp-proof and omni-sealed

Revision A



WEIGHT (APPROX.) 25 Kg

POWER SUPPLY 100 – 240 / 47 – 63 Hz

POWER CONSUMPTION (APPROX.) 150








MTBF ≥ 50,000


Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com94 Revision A

TECHNICAL SPECIFICATIONS RP09-CS40-CAxx

ELECTRICAL



NUMBER OF CHANNELS 4 or 8 or 12



MAXIMUM SYSTEM GAIN 100 dB


FEEDBACK CANCELLATION 30 dB

CHANNEL SELECTIVITY

at ±400 KHz >50 dB

at ±600 KHz >55 dB

at ±1 Mhz >60 dB

INTERMODULATION ≤ 40 dB

IN BAND SPURIOUS (890-915 /935-960 MHz)

≤ 60 dBc

OUT OF BAND SPURIOUSEMISSION




≤ 5 dB



10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

Digital Channel Selective RepeaterGSM 900 MHz

PRODUCT FEATURES

� Support up to 12 GSM Channels

� Digitalized Antenna Feedback Cancellation (AFC) function to reduce

the antenna isolation requirement up to 30 dB

� Dynamic Uplink Noise Control (UNC) function to reduce Uplink Interfer-

ence by automatically switch off the corresponding carriers when no

traffic

� 10 W Downlink Output Power utilizing ultra Linear PA, supports GSM,

GPRS and EDGE

� With built-in GSM modem, supports remote alarm monitoring and


� Ideal for urban area coverage extensive / optimizations for both indoor

and outdoor applications

� Single pole installation for Coverage extension applications with AFC to

reduce the antenna isolation requirement

� Dense urban area deployment (i.e., multiple units in same donor sector)

with UNC to reduce uplink interference



WEIGHT (APPROX.) 25 kg

POWER SUPPLY 100 – 240 / 47 – 63 Hz

POWER CONSUMPTION 170 W


MCU BATTERY BACKUP TIME (APPROX.) 2 hour






MTBF ≥ 50,000

Revision A



TECHNICAL SPECIFICATIONS RP21-CS43-CA00

ELECTRICAL




NUMBER OF CHANNELS 4





ANTENNA FEEDBACK CANCELLATION 30 dB


≤ 5 dB


SPECTRUM EMISSION MASK

Compliance wi th 3GPP TS 25.106 and 3GPP TS 25.143

ACRR

EVM

PCDE

INTERMODULATION


-10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

WCDMA Digital Channel Selective Repeater2100 MHz

PRODUCT FEATURES

� Utilizing the latest Pre-distortion MCPA technologies to deliver 20 W

Downlink Power

� Output in a compact chassis (18 kg)

� Automatic Digital gain control and Antenna Feedback Cancellation

(AFC) feature that can reduce the isolation requirement up to 30 dB

� Support up to 4 WCDMA channels in 25 MHz instantaneous bandwidth

� With built-in wireless modem, supports remote alarm monitoring and


� IP65 Chassis, designed for all outdoor application – waterproof, damp-

proof and Omni-sealed

Revision A




POWER SUPPLY (OPTIONAL.) 100 – 240 / 47 – 63 Hz (VAC)

-48 DC









MTBF ≥ 50,000

WCDMA Digital Channel Selective Repeater, 2100 MHz


ARTICLE RP09-BA15-CA00

ELECTRICAL

FREQUENCY RANGE DownlinkUplink

935 – 960 MHz890 – 915 MHz


OPERATING BANDWIDTHDownlinkUplink

2 - 25 MHz2 - 25 MHz


OUTPUT POWER, DOWNLINK 15 ± 1.5 dBm

OUTPUT POWER, UPLINK 15 ± 1.5 dBm

PASS BAND RIPPLE, P-P ≤ 7 dB


SYSTEM NOISE FIGURE UL @ MAXIMUM GAIN ≤ 7 dB

SPURIOUS EMISSIONS9 KHz – 1 GHz

ETSI EN 300609 – 4 V8.0.2

1 GHz – 12.75 GHz

OUT-OF-BAND GAIN

INTERMODULATION

INPUT VSWR ≤ 1.8

ABSOLUTE MAXIMUM RF INPUT POWER +10 dBm

IMPEDANCE 50 Ohm




POWER SUPPLY 100 – 240 / 47 – 63 Hz VAC

POWER CONSUMPTION (APPROX.) 20 W


RF CONNECTORS SMA




MTBF > 50,000

Bandwidth Adjustable Pico RepeaterGSM 900 MHz

PRODUCT FEATURES

� 15 dBm Uplink and Downlink output power

� 2-25 MHz bandwidth adjustable within GSM band

� Broadband linear power amplifier ensures un-distorted amplification

of GSM900 signals

� Local Commissioning by OMT software and remote monitoring

available by modem (optional)

� Compact Size, light weight for easy and fast deployment

Revision A

Bandwidth Adjustable Pico Repeater, GSM 900 MHz





POWER SUPPLY 100 – 240 / 47 – 63 Hz VAC

POWER CONSUMPTION (APPROX.) 20 W


RF CONNECTORS SMA




MTBF > 50,000

Revision A

SYSTEM REQUIREMENTS

CMS SERVER MINIMUM HARDWARE REQUIREMENTS (LESS THAN 1000 NES)

PROCESSOR Dual-core 3.0 GHz or above

MEMORY 4 GB

HARD DISK 80 GB

NETWORK 2 x 100 BaseT LAN

SERIAL PORTS At least one available Com Port

MODEM 1x GSM modem (If the communication mode between

CMS and devices is SMS/GPRS)

CD-ROM CD-ROM 48 x speed

IP GATEWAY MCP-1001 (optional)

CMS SERVER SOFTWARE REQUIREMENTS

OPERATING SYSTEM Windows Server 2008 (US version)

SUPPORTED DATABASE APPLICATIONS

Microsoft SQL Server 2005/2008 Standard Edition

JDK JDK 1.6.x

CMS INSTALLATION REQUIREMENTS

For the installation of CMS, the CMS server should be bond with a static public IP address for remote access.

Coverage Maintenance SystemCMS v8.2

PRODUCT FEATURES

� Complete Management Platform for wireless enhancement products

(Network Elements) including repeaters, boosters and NMU etc

� Real time alarm collection with Alarm history log

� Real-time or scheduled query for parameters configuration and status update.

� Concurrent handling of multiple NEs

� Scheduled batch processing of commands

� North Bound Interface for integration with others EMS or NMS with SNMP

� Support SMS or IP-based communication mode. Optional interface to

SMS center (SMPPv3.3 or 3.4). Support alarm forwarding to cellular

device handset via SMS or email

� Optional Electronic Map Interface (MapX 5.0 or above version).

� Support Browser – Server configuration over TCP/IP

� Running on standard Server platform. Utilizing proven Microsoft SQL

database to achieve scaleable, reliable and secure architecture

CMS GUI

Coverage Maintenance System, CMS v8.2


TECHNICAL SPECIFICATIONS RP18-BS40-CA00

ELECTRICAL




NUMBER OF BAND SELECTIVE SEGMENT

4

OPERATING BANDWIDTH PER BAND SELECTIVE SEGMENT

0.2 - 20 MHz adjustable





PASS BAND RIPPLE @ FBW, P-P ≤ 5 dB


≤ 5 dB


OUT OF BAND GAIN

ETSI EN 301 908-15*

ACRR

EVM

UNWANTED EMISSIONS

INPUT INTERMODULATION

OUTPUT INTERMODULATION


-10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

Digital Band Selective Repeater1800 MHz

PRODUCT FEATURES

� 4 pass band segments with independent ON/OFF for maximum

flexibility

� 10 W total output power

� Integrated wireless modem for remote configuration, monitoring

and control

� Internal backup battery keeps the alarm unit running for up to

two hours after power failure

� Support offline isolation detection

� Compatible to our generic OMT and OMC platform

� Designed for all weather outdoor installation – waterproof,

damp-proof and omni-sealed (IP65)

� Can be configured as Master Unit (MU) or Slave Unit (SU) in a

centralized monitoring system




POWER SUPPLY 100 – 240 / 47 – 63 Hz









MTBF ≥ 50,000

*: Compliance with standard @ DL 40 dBm, UL 23 dBm.

Digital Band Selective Repeater, 1800 MHz


TECHNICAL SPECIFICATIONS RP09-BSxx-CAxx

ELECTRICAL 2W 5W 10 W 20 W



OPERATING BANDWIDTH PER SUB-BAND 0.2-25 adjustable

SUB-BANDS 4


TOTAL OUTPUT POWER, DOWNLINK 33±1.5 37±1.5 40±1.5 43±1.5




UPLINK NOISE FIGURE ≤ 5 dB

OUT OF BAND GAIN*

Offset ≥ 400KHz ≤ 50 dB

Offset ≥ 600KHz ≤ 40 dB

Offset ≥ 1MHz ≤ 35 dB

Offset ≥ 5MHz ≤ 25 dB

SPURIOUS AND INTERMODULATION**

9kHz-1GHz -36 dBm

9kHz-1GHz -30 dBm

OUT OF BAND SPURIOUSEMISSION



INPUT VSWR ≤ 1.5

SYSTEM GROUP DELAY ≤ 6.5 μsec


10 dBm

IMPEDANCE 50 Ohm

Digital Band Selective RepeaterGSM 900 MHz

PRODUCT FEATURES

� Total 4 pass band segments with independent ON/OFF for maximum flexibility

� 2 W/5 W/10 W/20 W total output power

� Integrated GSM wireless modem for remote configuration, monitoring and control

� Internal backup battery keeps the alarm unit running for up to two hours after

power failure

� Compatible to our generic OMT and OMC platform

� Designed for all weather outdoor installation – waterproof, damp-proof and omni-

sealed (IP65).




POWER SUPPLY 100 – 240 / 47 – 63 Hz

POWER CONSUMPTION 150 160 170 180

POWER UP WAITING TIME 180 sec

MCU BATTERY BACKUP TIME 2 hour






MTBF ≥ 50,000

*: Test at 65dB system gain **: Intermodulation test at 23dBm output _Downlink and at 15dBm output _Uplink.

Digital Band Selective Repeater, GSM 900 MHz



ELECTRICAL



OPERATING BANDWIDTH 1.4/3/5/10/15/20 MHz

SUB-BANDS (MAXIMUM) 4






PASS BAND RIPPLE ≤ 4 dB

SYSTEM NOISE FIGURE @ MAX. SYSTEM GAIN

≤ 5 dB

OUT-OF-BAND GAIN

Compliance with 3GPP TS 36.106

ACRR

EVM

UNWANTED EMISSIONS

INPUT INTERMODULATION

OUTPUT INTERMODULATION



10 dBm

INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm

LTE Band Selective Repeater2600 MHz

PRODUCT FEATURES

� 10 W total output power

� Operating bandwidth can be adjusted via OMT software.

� Multi sub-bands (up to 4)

� Digital filtering for multi sub-band frequency selection up to 60

MHz in total

� Integrated wireless modem for remote configuration, monitoring

and control

� Internal backup battery keeps the alarm unit running for up to two

hours after power failure

� Optional OMC is available for remote operation and maintenance of

a group of repeaters

� Designed for all weather outdoor installation – waterproof, damp-

proof and Omni-sealed (IP65)




POWER SUPPLY 100 – 240 / 47 – 63 Hz






LTE Band Selective Repeater, 2600 MHz


TECHNICAL SPECIFICATIONS RP21-0217-CA00

ELECTRICAL

FREQUENCY RANGE, UPLINK 1920 – 1980 MHz

FREQUENCY RANGE, DOWNLINK 2110 – 2170 MHz

NUMBER OF CHANNELS 2


TOTAL OUTPUT POWER, UPLINK 10±1 dBm

TOTAL OUTPUT POWER, DOWNLINK 17±1 dBm

MAXIMUM SYSTEM GAIN 70±2 dB


ANTENNA FEEDBACK CANCELLATION 30 dB

SPECTRUM EMISSION MASK

Compliance with 3GPP TS 25.106ACRR

EVM

PCDE

INTERMODULATION

SYSTEM NOISE FIGURE AT MAXIMUM GAIN

≤ 6 dB


INPUT VSWR ≤ 1.5

IMPEDANCE 50 Ohm



WEIGHT 1.5 kg

POWER SUPPLY 100 – 240 VAC / 50 – 60 Hz


POWER UP WAITING TIME 30 sec





MTBF ≥ 50,000 hr

FUNCTIONAL BLOCK DIAGRAM

WCDMA Digital PICO Repeater1920 - 1980 and 2110 - 2170 MHz

PRODUCT FEATURES

� In-built Donor antenna and Service antenna

� Automatic Digital gain control and Antenna Feedback Cancellation

(AFC) feature that can reduce the isolation requirement up to 30 dB

� Support up to 2 WCDMA channels in 30 MHz instantaneous bandwidth

WCDMA Digital PICO Repeater, 1920 - 1980 & 2110 - 2170 MHz



ELECTRICAL

FREQUENCY RANGE, UPLINK 1710 – 1760 or 1760 – 1785 MHz

FREQUENCY RANGE, DOWNLINK 1805 – 1855 or 1855 – 1880 MHz


OPERATING BANDWIDTH, UPLINK 2 – 25* MHz

OPERATING BANDWIDTH, DOWNLINK 25** MHz

GAIN ADJUSTMENT RANGE, 1 dB step 0 - 20 dB

OUTPUT POWER, DOWNLINK

With Integrated Antenna 15 ± 1.5 dBm

Without Integrated Antenna 14 ± 1.5 dBm

OUTPUT POWER, UPLINK 15 ± 1.5 dBm



SYSTEM NOISE FIGURE AT MAXIMUM GAIN ≤ 8 dB

SPURIOUS, ΔF ≥ 1MHZ

ETSI EN 300609 – 4 V8.0.2

9 KHz – 1 GHz

1 GHz – 12.75 GHz

OUT-OF-BAND GAIN

INTERMODULATION

INPUT VSWR ≤ 2.0

ABSOLUTE MAXIMUM RF INPUT POWER +10 dBm

IMPEDANCE 50 Ohm



WEIGHT 2.5 kg

POWER SUPPLY 90 – 264 VAC / 45 – 65 Hz



RF CONNECTORS SMA




MTBF ≥ 50,000 hr

FUNCTIONAL BLOCK DIAGRAM

GSM1800 Bandwidth Adjustable Pico Repeater1805 – 1855 or 1855 – 1880 and 1710 – 1760 or 1760 – 1785 MHz

PRODUCT FEATURES

� In-Double Side-Band adjustable from 2 MHz to 25 MHz

for downlink operating band

� UL fixed 2 5MHz operating band and central frequency adjustable.

� IF filtering technology adopted for in-band signal selection and

out-of-band signal suppression

� With integrated antenna (6dBi gain) and option for connecting

external antenna

� Broadband linear power amplifier ensures undistorted amplification

of GSM1800 signals

� Low noise amplifier improves uplink system noise figure for better voice

quality and reduced drop call

� System commissioning can be performed without using any additional

tool or equipment

� Highly integrated design with miniaturized enclosure, small size, light

weight and easy to install

* Sliding DL double side-band adjustable range is 2-25MHz ** UL central frequency adjustable

GSM1800 Bandwidth Adjustable Pico Repeater, 1805 – 1855 or 1855 – 1880 & 1710 – 1760 or

1760 – 1785 MHz


REPEATER ANTENNAS We now offer a range of repeater antenna solutions on all bands. These anten-

nas are designed to be easily installed and set up on-site. Bands available range

from the lowest 800 MHz to maximum 2500 MHz.

LEAX branded Repeater Antennas

Outdoor Parabolic Antenna, 824 - 896 MHz





Outdoor Yagi Antenna, 890 - 960 MHz



Outdoor Directional Antenna for Microcell, 806 - 960, 1710 - 2300 and 2400 - 2500 MHz

Outdoor Directional Antenna for Microcell, 824 - 960 MHz


Outdoor Directional Antenna for Panel, 1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz


Outdoor Parabolic Antenna824 - 896 MHz

Revision A

MECHANICAL

DIMENSIONS, (H x W x D) 1200 mm (47.2 in)

WEIGHT, WITHOUT MOUNTING KIT 12 kg (26.7 lb)

WEIGHT, WITH MOUNTING KIT 16 kg (35.6 lb)

MOUNTING KIT Pole Mount included

REFLECTOR MATERIAL Aluminum Alloy

AZIMUTH ADJUSTABLE RANGE ± 90 deg

ELEVATION ADJUSTABLE RANGE ± 12 deg



OPERATIONAL WIND SPEED 210 km/h (130.5 mph)

SHIPPING DIMENSIONS, (H x W x D)

1290 x 380 x 1290 mm (50.7 x 15.7 x 50.7 in)

SHIPPING WEIGHT 20 kg (44.4 lb)

ELECTRICAL RA09-1818-CA00


POLARIZATION Vertical / Horizontal

GAIN > 18 dBi

HALF-POWER BEAMWIDTH 18 deg

SIDELOBE SUPPRESSION >18 dB

FRONT-TO-BACK RATIO ≥ 25 dB

VSWR ≤ 1.5:1

MAXIMUM POWER 100 W

LIGHTNING PROTECTION Direct Ground

IMPEDANCE 50 Ohm

ANTENNA PATTERN




Revision A




GAIN > 18 dBi

HALF-POWER BEAMWIDTH > 18 deg

UPPER SIDELOBE SUPPRESSION >18 dB

FRONT-TO-BACK RATIO > 25 dB

VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

MECHANICAL












1290 x 380 x 1290 mm (50.7 x 15.7 x 50.7 in)



Revision A

ANTENNA PATTERN




Revision A

MECHANICAL












900 x 290 x 900 mm (35.4 x 11.4 x 35.4 in)





GAIN > 22.5 dBi

HALF-POWER BEAMWIDTH 10.5 deg

SIDELOBE SUPPRESSION >18 dB


VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

ANTENNA PATTERN




Revision A




GAIN > 24.5 dBi




VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

MECHANICAL












1290 x 380 x 1290 mm (50.7 x 15.7 x 50.7 in)



Revision A

ANTENNA PATTERN






GAIN > 23 dBi




VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

MECHANICAL












900 x 290 x 900 mm (35.4 x 11.4 x 35.4 in)



Revision A

ANTENNA PATTERN




Outdoor Yagi Antenna890 - 960 MHz

Revision A

MECHANICAL

DIMENSIONS, (H x W x D) 990 x 195 x 105 mm (39.0 x 7.8 x 4.1 in)

WEIGHT, WITHOUT MOUNTING KIT 1.3 kg (2.8 lb)

WEIGHT, WITH MOUNTING KIT 1.4 kg (3.0 lb)




OPERATIONAL HUMIDITY ≤ 95%

OPERATIONAL WIND SPEED 150/200 km/h


1000 x 200 x 110 mm (39.4 x 15.7 x 4.3 in)

SHIPPING WEIGHT 1.5 kg (3.3 lb)

ELECTRICAL YA13-0809-CA00


POLARIZATION Vertical

GAIN 13 dBi

HORISONTAL BEAMWIDTH 40 deg

VERTICAL BEAMWIDTH 40 deg

FRONT-TO-BACK RATIO ≥ 26 dB

VSWR ≤ 1.5:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm




Revision A

MECHANICAL





RADIATING ELEMENT MATERIAL Brass

BOOM MATERIAL Aluminum

CONNECTOR TYPE N-Female, Bottom





790 x 110 x 100 mm (31.1 x 4.3 x 3.9 in)

SHIPPING WEIGHT 1.4 kg (3.1lb)

ANTENNA PATTERN


FREQUENCY RANGE 1710-1880 MHz 1850-1990 MHz 1920-2170 MHz


GAIN 11.5 dBi 12.0 dBi 12.5 dBi

HORIZONTAL BEAMWIDTH 40 deg 36 deg

VERTICAL BEAMWIDTH 38 deg 32 deg

FRONT-TO-BACK RATIO >15 >20

VSWR ≤ 1.5:1 ≤ 1.5:1 (typ.)

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm





Revision A

MECHANICAL





RADIATING ELEMENT MATERIAL Aluminum

BOOM MATERIAL Aluminum






490 x 170 x 105 mm (19.3 x 6.7 x 4.1 in)

SHIPPING WEIGHT 1.4 kg (3.1lb)




GAIN 11.5 dBi


SIDELOBE SUPPRESSION 35 dB


VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

ANTENNA PATTERN



ELECTRICAL DA09-7511-CA00




HORIZONTAL BEAMWIDTH 75 deg 60 deg 55 deg

VERTICAL BEAMWIDTH 58 deg 48 deg 48 deg


VSWR ≤ 1.4:1

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (H x W x D) 480 x 282 x 54 mm (18.9 x 11.1 x 2.1 lb)



RADOME MATERIAL AND COLOR PVC, Light Grey, RAL7035

MOUNTING KIT Wall or pole mount included


CONNECTOR TYPE AND LOCATION N-Female, Bottom





560 x 393 x 133 mm (22 x 15.5 x 5.2 in)


Outdoor Directional Antenna for Microcell806 - 960, 1710 -2300 and 2400 - 2500 MHz

Revision A

ANTENNA PATTERN




ANTENNA PATTERN




GAIN 18 dBi

HORIZONTAL BEAMWIDTH 30 deg



VSWR 30 deg

MAXIMUM POWER 200 W


IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (H x W x D)With reflector

1251 x 796 x 474 mm(49.3 x 31.3 x 18.7 in)



RADOME MATERIAL AND COLOR PVC, Light Grey, RAL7035

MOUNTING KIT SJA-B-12R (16)

RADIATING ELEMENT MATERIAL PCB

CONNECTOR TYPE AND LOCATION N-Female, Bottom





Antenna 1465 x 320 x 275 mm (57.7x12.6x10.8 in)

Reflector 1215 x 570 x 115 mm (47.8 x 22.4 x 4.5 in)

SHIPPING WEIGHT Antenna 27 kg (59.5 lb)

Reflector 8 kg (17.6 lb)

Outdoor Directional Antenna for Microcell824 - 960 MHz

Revision A

Outdoor Directional Antenna for Microcell, 824 - 960 MHz






HORIZONTAL BEAMWIDTH 32 deg


FRONT-TO-BACK RATIO > 26 dB (typ. 30)

VSWR ≤ 1.4:1 ≤ 1.5:1

MAXIMUM POWER 100 W

IMPEDANCE 50 Ohm

MECHANICAL




RADOME MATERIAL AND COLOR ABS, White


CONNECTOR TYPE AND LOCATION TNC, Rear





290 x 280 x 120 mm (11.4 x 11.0 x 4.7 in)


ANTENNA PATTERN

Outdoor Directional Antenna for Microcell1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz

Revision A




Outdoor Directional Antenna for Panel1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz

Revision A

ELECTRICAL PA21-3020-CA00



GAIN 19.5 dBi 20.0 dBi

HORIZONTAL BEAMWIDTH 33 deg 32 deg

VERTICAL BEAMWIDTH 7.5 deg 7.0 deg

FIRST UPPER SIDELOBE SUPPRESSION

> 18 dB

NULL FILL < 18 dB

FRONT-TO-BACK RATIO > 35 dB (typ. 40)

VSWR ≤ 1.4:1 ≤ 1.5:1

3RD ORDER INTERMODULATION @ 2X43 DBM < -150 dBc

MAXIMUM POWER 100 W


IMPEDANCE 50 Ohm

MECHANICAL




RADOME MATERIAL AND COLOR Fiberglass, Light Grey, RAL7035

MOUNTING KIT SJA-B-12R(16)

REFLECTOR MATERIAL Aluminum

RADIATING ELEMENT MATERIAL Zinc Composite

CONNECTOR TYPE AND LOCATION 7/16 DIN-Female, Bottom





1460 x 365 x 160 mm (57.5 x 14.3 x 6.3 in)


ANTENNA PATTERN

Outdoor Directional Antenna for Panel, 1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz


INDOOR ANTENNAS We now offer a range of indoor antenna solutions on all bands. These anten-

nas are designed to be easily installed and set up on-site. Bands available range

from the lowest 670 MHz to maximum 2700 MHz.

LEAX branded Indoor Antennas

Indoor Omni-directional Ceiling Mounted Antenna, 670 - 960 and 1710 - 2700 MHz


Indoor Omni-directional Ceiling Mounted Antenna, 806 - 960 and 1710 - 2700 MH

Wide-band Indoor Omni Antenna, 690 - 2700 MHz

Indoor Directional Wall Mounted Antenna, 806 - 960, 1710 - 2500 and 2500 - 2700 MHz

Indoor Directional Wall Mounted Antenna, 698 - 960, 1710 - 2700 MHz



Indoor Omni-directional Ceiling Mounted Antenna 670 - 960 and 1710 - 2700 MHz

ELECTRICAL CA36-0627-CA00

FREQUENCY RANGE

PARAMETERS / SPECIFICATIONS 670 - 960 MHz 1710 - 2700 MHz

670 - 696 MHz 696 - 806 MHz 806 - 960 MHz 1710 - 2500 MHz 2500 - 2700 MHz


GAIN 2 dBi 4 dBi

HORIZONTAL BEAMWIDTH 360°

VERTICAL BEAMWIDTH 100-120° 30-65°

VSWR ≤2.5:1 ≤2.0:1 ≤1.5:1

IMD3 ( 2X43 DBM CARRIER) <-140 dBc

MAXIMUM POWER PER PORT 100 W

IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (H x W x D) ø208 x 112 mm (ø 8.2 x 4.5 in)

WEIGHT, W/O MOUNTING KIT 0.4 kg / 0.9 lb


CONNECTOR TYPE AND LOCATION N-female


MOUNTING Ceiling Mounted

SHIPPING DIMENSIONS 175 x 175 x 175 mm (6.9 x 6.9 x 6.9 in)


ENVIRONMENTAL CLASS Indoor

CONNECTOR POSITION & INSTALLATION GUIDE

Revision A





FREQUENCY RANGE


698 - 790 MHz 790 - 960 MHz 1710 - 2170 MHz 1710 - 2700 MHz

POLARIZATION Dual linear V&H

GAIN 3.5 dBi 4.5 dBi 5.0 dBi 5.5 dBi


VERTICAL BEAMWIDTH 40-90° 80-115° 50-100° 40-70°

VSWR ≤2.0:1



IMPEDANCE 50 Ohm

MECHANICAL


WEIGHT, W/O MOUNTING KIT 0.4 kg (0.9 lb)


CONNECTOR TYPE AND LOCATION 2 x N-female







Revision A





FREQUENCY RANGE


806 - 790 MHz 1710 - 2500 MHz 2500 - 2700 MHz

POLARIZATION Vertical Vertical & Horizontal

GAIN 2 dBi 4 dBi 4 dBi


VERTICAL BEAMWIDTH 85±10° 50±10° 40±10°

VSWR ≤2.0:1

ISOLATION BETWEEN PORTS / ≥22 dB ≥25 dB



IMPEDANCE 50 Ohm

MECHANICAL


WEIGHT, W/O MOUNTING KIT 0.42 kg (1.1 lb)








Revision A



Wide-band Indoor Omni Antenna690 - 2700 MHz

ARTICLE CA36-1727-CA00

ELECTRICAL



GAIN 4 dBi


VERTICAL BEAMWIDTH 30 - 65°

VSWR ≤1.5:1


IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (H x Dia) 68 x 132 mm (2.7 x 5.2 in)


RADOME MATERIAL AND COLOR PS, White

MOUNT Ceiling, via hole (standard)

REFLECTOR MATERIAL Aluminium




SHIPPING DIMENSIONS, (H x W x D) 145 x 145 x 140 mm (5.7 x 5.7 x 5.5 in)


ANTENNA PATTERN

Revision A


Indoor Directional Wall Mounted Antenna806 - 960, 1710 - 2500 and 2500 - 2700 MHz

Revision A

ELECTRICAL WA90-0827-CA00




HORIZONTAL BEAMWIDTH 90 deg 75 deg 65 deg


VSWR ≤ 1.5:1

3RD ORDER INTERMODULATION @ 2X33 dBm -140 dBc


IMPEDANCE 50 Ohm

MECHANICAL



RADOME MATERIAL AND COLOR ABS, Light Grey, RAL7035

MOUNT Wall

REFLECTOR MATERIAL Aluminium

RADIATING ELEMENT MATERIAL Aluminium



SHIPPING DIMENSIONS, (H x W x D) 338 x 221 x 80 mm (13.3 x 8.7 x 3.1 in)

SHIPPING WEIGHT 0.8 kg (1.8 in)

ANTENNA PATTERN

Indoor Directional Wall Mounted Antenna, 806 - 960, 1710 - 2500 and 2500 - 2700 MHz


Indoor Directional Wall Mounted Antenna 698 - 960 and 1710 - 2700 MHz


FREQUENCY RANGE


698 - 800 MHz 800 - 960 MHz 1710 - 2700 MHz



HORIZONTAL BEAMWIDTH 115° 95° 90°

VERTICAL BEAMWIDTH 55°

VSWR ≤1.8:1 ≤1.5:1



IMPEDANCE 50 Ohm

MECHANICAL

DIMENSIONS, (H x W x D) 210 x 180 x 44 kg (8.3 x 7.1 x 1.7 in)



CONNECTOR TYPE AND LOCATION N-female


MOUNTING Wall mounted





Revision A

1. Drill four holes in wall per pattern of holes in plate (item 2) shown above.

2. Attach flat side of plate (item 2) to wall us-ing wall anchors (item 4) and screws (item 3).

3. Mount antenna (item 1), to plate (item 2).

4. Connect RF-Cable.



Indoor Directional Wall Mounted Antenna 790 - 960 and 1710 - 2700 MHz


FREQUENCY RANGE


790 - 960 MHz 1710 - 2700 MHz 2300 - 2700 MHz

POLARIZATION Vertical ±45°


HORIZONTAL BEAMWIDTH 85±10 75±10 70±10

VERTICAL BEAMWIDTH 65° 60° 55°

VSWR ≤1.8:1



IMPEDANCE 50 Ohm

MECHANICAL



RADOME MATERIAL AND COLOR ABS, Light Grey



MOUNTING Wall mounted





Revision A


RELIABILITY & HIGH PERFORMANCE

LEAX ARKIVATOR TELECOM Stridsvagnsvägen 14

291 39 Kristianstad, Sweden

PHONE: +46 8 752 02 20INFO: [email protected]


RELIABILITY & HIGH PERFORMANCE

LEAX Arkivator Telecom is a global technology company servicing the coaxial and RF industry in both the broadcasting and telecom sectors.

Our focus is to develop and manufacture the most innovative, dependable and long-lasting products on the market.

At LEAX Arkivator Telecom, our focus has long been on the development and

manufacture of innovative, long-lasting RF products offering superior reliability and performance for the worldwide market. Today our position on the worldwide

market continues to grow stronger thanks to the extensive production knowl-edge and manufacturing capacity available to us as part of the LEAX Group.

At LEAX Arkivator Telecom we work together with major international operators,

system suppliers and cable manufacturers who have used our products ever since the telecom boom. These companies trust the performance our products

deliver, and we are dedicated to maintaining their confidence while creating new, high quality products. The single piece connector and our market leading

built-in weatherproofing system are examples of designs that save telecom customers money while providing long-term system stability.

LEAX ARKIVATOR TELECOM Stridsvagnsvägen 14

291 39 Kristianstad, Sweden

PHONE: +46 8 752 02 20INFO: [email protected]


connectors jumper cables emp & grounding cable … · web: . sales office. ordering products...

Documents