connectors · when connecting the wires, (r =ρ l/a). reduced electrical resistance affords higher...

4
JOW 경기도 성남시 둔촌대로 388번길 24 511호 TEL. 031-720-5150, FAX. 031-720-5311 Unit 511, 24, Dunchon-daero 388beon-gil, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea TEL. 82-31-720-5150, FAX. 82-31-720-5311 E-MAIL. [email protected], HOMEPAGE. http://www.jowootech.com connectors

Upload: others

Post on 04-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: connectors · when connecting the wires, (R =ρ l/A). Reduced electrical resistance affords higher currents and higher voltage applications. Only JOW connectors could perform the

JOW

경기도 성남시 둔촌대로 388번길 24 511호TEL. 031-720-5150, FAX. 031-720-5311 Unit 511, 24, Dunchon-daero 388beon-gil, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea TEL. 82-31-720-5150, FAX. 82-31-720-5311E-MAIL. [email protected], HOMEPAGE. http://www.jowootech.com

connectors

Page 2: connectors · when connecting the wires, (R =ρ l/A). Reduced electrical resistance affords higher currents and higher voltage applications. Only JOW connectors could perform the

With a great sense of pride and pleasure, we introduced the first generation JOW connectors in 2010 which evolved into third generation connectors by 2013. JOW connectors are the revolutionary products which eliminated the cumbersome tasks of stripping and splicing the wires before connection, while protecting the users from the risks of being exposed to electric shock. They are also water and dust resistant without loss of electrical conductivity during the wire connection. Most of all, it is so simple and easy to use that almost anyone could use them without training, anywhere, anytime with ease. Wire connection technology using JOW has proven to be about five times more efficient and economical than the traditional methods. Our international patents are based on the proprietary technology of “non-stripping and multi-contact” electrical connection. We named it as the “Insulation Displacement & Multiple Connection” technology, or IDMC technology. Ohm’s law of electricity attests the superiority of IDMC technology that electrical resistance is reduced as the connection points are increased when connecting the wires, (R =ρ l /A). Reduced electrical resistance affords higher currents and higher voltage applications. Only JOW connectors could perform the tasks of easy and simple electric wire connections without loss of electrical conductivity. IDMC could be applied in almost all walks of the modern industries where electricity is being used; such as construction, automobile, defense, electronics, home appliances, LED & lighting, outdoor advertisement, solar power, shipbuilding, aerospace, telecommunication, power transmission, etc. Industrial applications of the IDMC technology seem almost endless.Hope you will enjoy discovering more about the superiority of JOW connectors and technical advantages of the IDMC technology. Please feel free to contact us for any additional queries.

Greetings,

AUTHORIZATION TO MARK

Applicant: Manufacturer:

Address: Address:

Country: Country:Contact: Contact:Phone: Phone:FAX: FAX:Email: Email:

Standard(s):

Product:

Brand Name:

Models:

Korea, South Korea, South

Jowootech Co., Ltd. Jowootech Co., Ltd.

Unit 511, No. 24 Duncheon-daeroJungwon-gu, Seongnam-siGyeonggi-do

First floor, Quopin Building126-2 Yatap-dongBundang-gu, Seongnam-si463-816

Report Issuing Office: Dallas, TX

Mr. Benjamin Yoon Mr. Benjamin Yoon82-31-720-5150 82-31-720-5150NA [email protected] [email protected]

Party Authorized To Apply Mark: Same as Manufacturer

Insulation Piercing Connector

I-1, I-3, I-4, I-5, T-1, T-3, T-4, T-5, DI-1, T-21

JOW

Control Number: 4009473 Authorized by:Thomas J. Patterson, Certification Manager

This document supersedes all previous Authorizations to Mark for the noted Report Number.This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.

Intertek Testing Services NA Inc.545 East Algonquin Road, Arlington Heights, IL 60005

Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672

Standard for Safety Component Connectors for Use in Data, Signal, Control and Power Applications, UL 1977, Issued:2007/12/07 Ed:2 Rev:2011/01/24Special Use Attachment Plugs, Receptacles, and Connectors - General Instruction No 1; CSA C22.2 No. 182.3, Issue:1987/12/01; Reaffirmed (2009)

This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s)Covered section when made in accordance with the conditions set forth in the Certification Agreement and ListingReport. This authorization also applies to multiple listee model(s) identified on the correlation page of the ListingReport.

This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may beapplied only at the location of the Party Authorized To Apply Mark.

J. Patterson, CertificatioPP tt CPatterson Certificaterson CertificatePPatterson, CertificaPaat ca

Page 1 of 1ATM for Report 101470835DAL-001 ATM Issued: 13-Mar-2014ED 16.3.15 (1-Jan-13) Mandatory

Established as Jowoo Tech Co., Ltd.

“e-Clamp”, firstly, domestic patent registration in Korea.

ISO 9001, ISO14001 approval.

e-Clamp, International PCT and applied International Patents to 6 nations (USA. UK, Germany, Japan, China, Australia)

“ ” Registering Trademark “Tik-Tok”

Development of first generation products‘ ’

Invited as “Advanced Invention” to the Korean presidential office

Preferred purchase order from Korean governments and public organizations

e-Clamp 2nd registration in Korea

Achieved 2nd Version of e-Clamp

In-House R&D lab established

3rd Patent registration in Korea‘ ’

Exhibitor on “Korean Defence non-arms system 2011”‘ ’

Exhibitor on “Shanghai International Electrical Equipments 2011”

Developed 2.5 Generation of e-Clamp‘ ’

Exhibitor on “Tokyo Electrical/Electronic Equipments Industry 2011‘ ’

Silver medallist on “Korean Invention Awards 2011”

Official approval with test report from Korea Testing Laboratory (KTL)

Patent Registration in USA (No. US8062056)

Test report from KESCO (Korea Electrical Safety Corporation)

Made fourth patent registration of e-clamp

Exclusive sales agents agreements in USA, UK, Germany, Japan and China

Exhibitor on “Korean Defence non-arms system 2012”

Acquired CE approval

Exhibitor on “UK Elex 2012(The Electricians’ Exhibition) in Manchester”

Applied Design Patent and 2nd patent on International PCT

Acquired NEP(new product) certificate (nEp-mKE-2012-024)

Registered Japanese patent(no. 5058286)

Secured capital for first step technological development

Exhibitor on “Electrical Engineering Exhibition in Berlin, Germany 2012””

Participated in “2012 Korea Electronics Show””

Participated in “2012 World Korean Business Convention””

Applied 5th patent for “electric device connector””

Applied design for “electric device connector””

Applied 6th patent for “camera-type(CAM-I, T-type) wire jointing connector””

Made international PCT application for “electric device connector”

” Participated in “2013 Japan LED Exhibition”

Selected to lead a project to bolster export capabilities in 2013”

Applied 7th patent for “terminal for wire jointing connectors”

Participated in “2013 Smart Grid Exhibition”

Registered Chinese patent (ZL 201010248096 4)

Participated in Hanoi Exhibition in Vietnam”

Participated in “2013 Japan Equipment & Materials Fair”

Texas State University, U.S. - selected as consulting service provider for marketing support in U.S.

made second patent registration of e-clamp

The releasing Dual type of e-clamp

Exhibitor on ”LDI Show 2013” in Las Vegas, USA” “ ”

Applied Trademark “JOW”, JOWX

Andrew Ghim has been appointed as the CEO of Jowootech Co. Ltd.

Applied patent for ”Non-stripping Multi-connection Cam type connector”

Jowtech International Corp was established as a marketing arm of Jowootech Group.

Acquired PSE certification

Acquired ETL certification

Page 3: connectors · when connecting the wires, (R =ρ l/A). Reduced electrical resistance affords higher currents and higher voltage applications. Only JOW connectors could perform the

JOW CON

NETOR

ADVANTAGES OFJOW CONNETOR

No need to remove wire insulation.

No need to splice the wires.

Water and dust resistant. (IP 33)

Accommodate all kinds of electric wires

A

A

단선과 연선 연결이 자유롭다

생활 방수, 생활 방진이 된다

JOW connectors

9 9

9 12

12 12

JOW connectors

Tensile strength Graph

CONTACT AREA

TEST RESULT

Page 4: connectors · when connecting the wires, (R =ρ l/A). Reduced electrical resistance affords higher currents and higher voltage applications. Only JOW connectors could perform the

Automotive Aerospace

LED and Lighting Telecommunication Solar power Defense태양열발전

Waterproof housing Common type

COMING SOON

ANATOMY