constant wattage heating tape type emts up to 200°c · • withstand temperatures upto 200°c •...

2
Member of the NIBE Group Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - [email protected] - www.san-as.com CVR No.: 42 16 59 13 Type ref Nom. dim (mm) Weight kg/100m Min bending radius (mm) Gland size EMTS..CS 11.0x8.8 14.3 15 M20 EMTS..CF 10.2x8.0 14.3 25 M20 Applications: Withstand temperatures upto 200°C Available in outputs upto 50W/m Can be cut to length at site Particularly suited to small bore pipework Full range of controls and accessories Available for 110/120 and 220/240VAC Highly flexible Features: Microtracer type EMTS is a medium temperature parallelresis- tance, constant wattage, cut-to-length heating tape that can be used for freeze protection or process heating. It is particularly suited to refrigeration applications or for small bore instrument lines or process pipework located in non- hazardous areas. Microtracer type EMTS is chosen when short or moderate cir - cuit lengths are required (select Minitracer if longer circuitsare required). The silicone rubber insulation is particularly suited to applica- tions where great fl exibility is required. The installation of EMTS heating tape is quick and simple and requires no special skills or tools. Termination and power con- nection components are all provided in convenient kits. makes the installation of the heating system very economical. Max temperature: Un-energized 200ºC (392ºF) Energized See table Min. install. temp. -80ºC (-112ºF) Power supply 220-240VAC or 110-120VAC Max resistance of protective braid. 18.2 Ohm/km Weight and dimensions: Construction: Options: EMTS..CS Silicone rubber overjacket over tinned copper braid provides additional protec- tion. EMTS..CF Fluoropolymer overjacket over tinned copper braid provides protection where corrosive chemical solutions of vapours may be present. Technical Data Optional overjacket Constant Wattage Heating Tape Type EMTS up to 200°C 1.5mm² copper copper onductors Metallic braid Silicone rubber insulation Parallel circuit connection Silicone rubber jacket Nichrome heating element FEbruary 2018 01111 ENG

Upload: others

Post on 19-Jun-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Constant Wattage Heating Tape Type EMTS up to 200°C · • Withstand temperatures upto 200°C • Available in outputs upto 50W/m • Can be cut to length at site • Particularly

Member of the NIBE Group

Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - [email protected] - www.san-as.com

CVR No.: 42 16 59 13

Type ref Nom. dim(mm)

Weightkg/100m

Min bending radius (mm)

Gland size

EMTS..CS 11.0x8.8 14.3 15 M20EMTS..CF 10.2x8.0 14.3 25 M20

Applications:• Withstandtemperaturesupto200°C• Availableinoutputsupto50W/m• Canbecuttolengthatsite• Particularlysuitedtosmallborepipework• Fullrangeofcontrolsandaccessories• Availablefor110/120and220/240VAC• Highlyflexible

Features:Microtracer typeEMTS isamediumtemperatureparallelresis-tance,constantwattage,cut-to-lengthheatingtapethatcanbeusedforfreezeprotectionorprocessheating.It isparticularlysuitedtorefrigerationapplicationsor forsmallbore instrument lines or process pipework located in non-hazardousareas.MicrotracertypeEMTSischosenwhenshortormoderatecir-cuit lengthsare required (selectMinitracer if longercircuitsarerequired).Thesilicone rubber insulation isparticularly suited toapplica-tionswheregreatflexibilityisrequired.TheinstallationofEMTSheatingtapeisquickandsimpleandrequiresnospecialskillsortools.Terminationandpowercon-nectioncomponentsareallprovidedinconvenientkits.makestheinstallationoftheheatingsystemveryeconomical.

Maxtemperature: Un-energized200ºC(392ºF) EnergizedSeetableMin.install.temp. -80ºC(-112ºF)Powersupply 220-240VACor110-120VACMaxresistanceofprotectivebraid. 18.2Ohm/km

Weight and dimensions:Construction:

Options:EMTS..CS Siliconerubberoverjacketovertinned copper braid provides additional protec- tion.EMTS..CF Fluoropolymeroverjacketovertinned copperbraidprovidesprotectionwhere corrosivechemicalsolutionsofvapours maybepresent.Technical Data

Optiona

l

overjac

ket

Constant Wattage Heating Tape Type EMTS up to 200°C

1.5mm

²coppe

r

copper

onduc

tors

Metalli

cbraid

Silicone

rubber

insulatio

nPar

allelcir

cuit

connec

tionSilicone

rubber

jacket Nic

hrome

heatin

g

element

FEbru

ary

20

18

01

11

1 E

NG

Page 2: Constant Wattage Heating Tape Type EMTS up to 200°C · • Withstand temperatures upto 200°C • Available in outputs upto 50W/m • Can be cut to length at site • Particularly

Member of the NIBE Group

Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - [email protected] - www.san-as.com

CVR No.: 42 16 59 13

Heater nomi-nal output

(W/m)

Maximum permissible pipe temp. (ºC)EMTS-CS Part no. EMTS-CF Part no.

13 185 3664213 185 366411323 160 3664223 160 366412333 115 3664233 115 366413350 80 3664250 80 3664150

Termination kitUTK313

Description Part no.

EMTS..CS/CF with cable gland M20 7399135EMTS..CS/CF for cold cable 7399120

115V heating tape 230V heating tape277V multiply output by 5.80 277V multiply output by 1.45230V multiply output by 4.00 230V multiply output by 1.09208V multiply output by 3.27 208V multiply output by 0.91120V multiply output by 1.09 120V multiply output by 0.82110V multiply output by 0.91 110V multiply output by 0.25

Output(W/m)

Max circuit length* Zone length (Nom)

115V 230V 115V 230V13 58m 116m 741mm 1100mm23 44m 87m 900mm 1000mm33 36m 73m 1000mm 950mm50 30m 59m 995mm 900mm

*For±10%end-to-endpoweroutputvariation

Power conversion factors:

Grade 2.2toBS6351:Part1Heatingelement NickelChromiumPowerconductors Tinplatedcopper1.5mm2

ConductorinsulationSiliconerubberJacket SiliconerubberBraid TinnedcopperOverjacket SiliconerubberorFluoropolymer(FEP)(optional)

Maximum Pipe/Workpiece temperatures:The surface of the heater must not exceed the maximumwithstand temperature of its constructional materials. This isensuredbylimitingthepipeorworkpiecetemperaturetoasafelevel either by design calculation (a Stabilised Design) or bymeansoftemperaturecontrols.Forworstcaseconditions,thetemperatureofsteelpipesshouldbelimitedtothefollowinglevels:

Forconditionsotherthanworstcase,orpipesofothermaterials(eg.Plastic,StainlessSteel,etc.)Tolerances:Voltage+10%;Resistance+10%;-0%Pipe temperatures higher than those given above may beaccommodatedbyusing voltagecompensatingdevices - callforfurtherdetails.

Maximum circuit length:

Optiona

l

overjac

ket

Constant Wattage Heating Tape Type EMTS up to 200°C

1.5mm

²coppe

r

copper

onduc

tors

Metalli

cbraid

Silicone

rubber

insulatio

nPar

allelcir

cuit

connec

tion Silicone

rubber

jacketNic

hrome

heatin

g

element

Febru

ary

20

18

01

11

1 E

NG