construction – general construction construction …€¦ · · 2017-01-26construction –...

1

RAILWAY9

CONSTRUCTION – GENERAL CONSTRUCTION

CONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION – TILTROTATORS

CONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES, OIL & GAS

SCRAP PROCESSING

DEMOLITION

MATERIAL HANDLING

RAILWAYCUSTOM UNITS

EARTH DRILLS, TRENCHERS & OTHER ATTACHMENTS(FOR EXCAVATORS, SKIDSTEERS & TELEHANDLERS)

1

9

2

3

4

5

6

7

8

10

11

2017

kinshofer Worldwide

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer UK UNITED KINGDOM1984

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

RF-System ABSWEDEN

2011

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

Kinshofer USA UNITED STATES OF AMERICA

2013

AUGER TORQUE Europe Ltd.UNITED KINGDOM

2015

A History of Quality and Success For more than 45 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the global company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.KINSHOFER and the UK based company Auger Torque Europe Limited announced on February 3rd 2015 that they have signed a definite agreement to merge. Under the terms of the agreement KINSHOFER has acquired 100% of the shares of Auger Torque Europe Ltd. and Auger Torque Australia Pty Ltd.. Auger Torque is a manufacturer of earth drills, augers, trenchers and other high quality attachments for excavators, skidsteers, backhoes, telehandlers, tractors, truck cranes & more.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...

Many Applications One Solution

DEMOLITION Primary Demolition Secondary Demolition Steel

CONSTRUCTION Landscaping Snow Removal Road Construction Civil Engineering Utilities

SCRAP PROCESSING Scrap Metal Scrap Tires Scrap Rails

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different operating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell exchange and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

No matter if demolishing, breaking, comminuting or separating – with DEMAREC attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect solution for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the DemaPower- cylinder, or the DemaLink, making the exchange of jaws possible within only a few minutes on site!

kinshofer Over 45 years of experience as well as involvement with en d users

in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

CUSTOM UNITS Construction Off-Shore Nuclear Pipeline / Geothermal

MATERIAL HANDLING Waste Bulk Material Dry Cargo Timber

RAIL Rail Track Construction Rail Track Maintenance Scrap Rails

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-handling clamshell bucket with the incredible volume of 5000 litres!

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!

The railway is one of the most important transport systems in the world and thus railtracks run through almost every country on earth. As this extended system lives from its availability and reliability, it has to be constructed and maintained in a fast and accurate way. From the excavation works needed for the right positioning of tracks or cable pits, the compaction of the ballast, the handling and positioning of sleepers, ballast and rail tracks, to the maintenance of the constructed railtrack system, and finally up to the demolition and ultimate scrapping: KINSHOFER has every tool for your Road Rail Excavator or Loader Crane required to maintain or demolish railways.

Railway ...... application includes the construction of railway tracks as well

as its maintenance and finally the demolition and ultimate scrapping. No matter what task, KINSHOFER has the solution.

The RUS Sleeper Layer handles several sleepers at once and fits different sizes

For levelling and distributing ballast: the SKB-Ballast Sweeper Roller The RC 30 Mobile Rail Cutter

breaks rails without problem

For the optimal compaction of the ballast, the DT03/22 Double Ballast

Tamper is the ideal attachmentWith the Lid Opener LOP, cables and hoses can be positioned in already existing cable pits

With the slim Clamshell Bucket

of the C18VE Railway Set the

ballast can be removed from

in between the sleepers

The Sleeper Changing Unit RBS20HPX removes and places sleepers in existing railtracks

7We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany

—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Contents

Cata

log

effec

tive

Janu

ary

2017

Summary Listed by Operating Weight of Excavator 8

NOX Tiltrotatorsfor excavators with 3t up to 25t operating weight: TR06NOX / TR10NOX / TR14NOX / TR19 NOX / TR25NOX 9proportional control systems 11

Ballast Tamperssingle Ballast Tamper for excavators with up to 24t operating weight: RST03 12double Ballast Tamper for excavators with up to 22t / 24t operating weight: DT03/22 13

Rail Gripper with HPXdrivefor excavators with 10t to 24t operating weight: KM 632HPX Rail 14

Universal Railroad Grapplewith vertical cylinders s for loader cranes: KM 632Rc 15with horizontal cylinders for loader cranes: KM 632-2-R 16

Sleeper Changing Unit with Ballast Shieldwith ballast shield and buckets for excavators with 12t - 24t operating weight: RBS 20 17with HPXdrive and Buckets, for excavators with 12 - 24t operating weight: RBS 20HPX 18

Sleeper Loading Grapplefor excavators with 7t to 25t operating weight: KM 333 SleeperE / KM 333 Sleeper 19

Sleeper Layer for Use on a Tiltrotatorfor excavators with 12t to 24t operating weight: RUS05 20for excavators with 12t to 24t operating weight: RUS2 05 21

3-Axes-Manipulatorfor loader / static cranes: KM 931 22

Ballast BrushesBallast Brush for loaders or for excavators with >3t operating weight: SKB-Ballast 23

Lid Openerfor cable trenches, for excavators with 4t up to 24t operating weight: LOP 24

Double Ballast Ploughfor excavators with 8t to 20t operating weight: SP20H 25

Grapples with Shell Exchange System C-VE 26Clamshell Bucket / Sleeper & Rail Gripper Set for excavators with 13t to 18t: C18VE Railway Set 27Clamshell Bucket C18VE/RIG for rigid mounting at excavators with 13t to 18t: C18VE/RIG 28

Fork Setfor excavators with 3t to 24t operating weight: GAF 29

Mobile Rail Cutterfor excavators with 22t to 35t operating weight: RC 30 30

kinshofer Rotator Line 31

Earth Drills and Augers 32see catalog EARTH DRILLS, TRENCHERS AND OTHER ATTACHMENTS

Accessories for Cardanic and Rigid Mounting 34

11

8 We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany

Summary Listed by Operating Weight of Excavator

Type Operating Weight of Excavator (t)

NOX Tiltrotators1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 19 20 21 25 30

TR06NOXTR10NOXTR14NOXTR19NOXTR25NOX

Sleeper Changing Units with Ballast Shield1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RBS20RBS20HPX

Sleeper Layers1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RUS05 RUS2 05

Ballast Tampers / Double Ballast Tampers1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RST03DT03/22

Lid Opener 1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

LOP02LOP05

Double Ballast Plough1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

SP20H

Clamshell Buckets with Exchangeable Shells 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

C18VE Railway SetC18VE/RIG

Mobile Rail Cutter1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RC30

Fork Set1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19 20 21 ... 24

GAF6GAF8GAF12GAF18GAF20GAF24

Legende:

vertikaler Zylinder (V = vertikal, Typ E = mit Wechselschalen)

HPXdrive

andere


TR06NOX / TR10NOX / TR14NOX /TR19NOX / TR25NOX Tiltrotators

1 t 2 t 3 t 4 t 5 t 6 t ... 9 t 10 t 11 t ... 17 t 18 t ... 23 t 24 t 25 t 26 t 27 t 28 t

lower quick coupler continuous rotation (360°)

tilt angle

Total height depending on mounted adapters

GripperTRG06quick coupling

adapter

D

E

FG

Experience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of up to 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 3t / 6600 lbs to 25t / 55000 lbs.l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive runs in permanent greasing. l Option: High-flow swivel up to 30 MPa / 4320 psi or electric swivel.For further information and special NOX attachments see our Catalog: CONSTRUCTION - TILTROTATORS

Tiltrotator TR25NOX S70 S70

Gripper

Type Self Dimensions Opening Closing Closing Loadweight D x E x F3) width G time4) force capacity(kg/lbs) (mm/in) (mm/in) (sec.) (kN/lbf ) (kg/lbs)

TRG06 40 / 88 470 x 515 x 140 / 10.5 x 20.3 x 5.5 415 / 16.34 1.5 7.5 / 1650 300 / 660

TRG10 80 / 176 600 x 675 x 205 / 23.6 x 26.6 x 8.1 610 /24.02 1.3 10 / 2200 500 / 1100

TRG18 113 / 249 700 x 715 x 265 / 27.6 x 28.2 x 10.4 713 / 28.07 1.7 18 / 3960 900 / 1980

TRG25 195 / 429 895 x 760 x 295 / 35.2 x 29.9 x 11.6 1100 / 43.31 2.0 19.5 / 4290 1400 / 3080

3) see technical drawing 4) at 25 l/min / 6.61 GPM

Description: hydraulic gripper module, rigidly mounted to the NOX, can be used to pose masts, tubes etc. without the necessity of changing an attachment

Technical Drawings

Tiltrotator TR06NOX / TR10NOX / TR18NOX / TR25NOX with 360° rotation

Type Excavator Self Width Length Height max. Bucket Tiltingoperating weight weight1) A2) B2) C2) width angle

(t/lbs) (approx. kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (°)

TR06NOX >3-6 / 120 / 185 / 500 / 370 / 1300 / 2 x 50>6600-13200 264 7.28 19.69 14.57 51.18

TR10NOX >5-10 / 220 / 205 / 610 / 445 / 1600 / 2 x 55>11000-22000 484 8.07 24.02 17.52 62.99

TR14NOX >10-14 / 440 / 225 / 610 / 550 / 1600 / 2 x 50>22000-30800 968 8.86 24.02 21.65 62.99

TR19NOX >14-19 / 580 / 240 / 700 / 625 / 1700 / 2 x 50>30800-41800 1012 8.86 29.13 20.87 78.74

TR25NOX >18-25 / 610 / 260 / 760 / 650 / 2200 / 2 x 50>39600-55000 1342 10.23 29.92 25.60 86.611) incl. upper suspension, excl. quick coupler 2) reference: TR06NOX S40/S40, TR10NOX/TR14NOX S45/S45, TR19NOX S60/S60, TR25NOX S70/S70

TR19NOX


Tiltrotator Type TR06NOXControl system unit DF10 DF4 CSPBreaking force max. (ISO) kN/lbf 35 / 7700Tilt torque Nm/ft.lbs 8500 / 6269Rotation speed 1/min 9 at 40 l/min / 10.6 GPMRotation torque Nm/ft.lbs 4500 / 3319 constant at 360° continuousOil flow extra function 1/2 max. l/min / GPM 35 / 9.3

Hydraulic pressure max. MPa/psi rotation: 20 / 2880tilt: 25 / 3600

rotation: 20 / 2880tilt: 25 / 3600 25 / 3600

Recommended pressure in return line MPa/psi 1 / 144Number of swivel channels extra function number 4 2 4Number of swivel channels quick coupler number 2

Technical Data

Tiltrotator Type TR10NOXControl system unit DF10 DF8 DF4 CSPBreaking force max. (ISO) kN/lbf 70 / 15400Tilt torque Nm/ft.lbs 10500 / 7744Rotation speed 1/min 7,5 at 40 l/min / 10.6 GPMRotation torque Nm/ft.lbs 6500 / 4794 constant at 360° continuousOil flow extra function 1/2 max. l/min / GPM 40/70 / 10.6/18.5 70 / 18.5 40 / 10.6 40 / 10.6


rotation: 20 / 2880tilt: 25 / 3600

rotation: 20 / 2880tilt: 25 / 3600 25 / 3600

Recommended pressure in return line MPa/psi 1Number of swivel channels extra function number 4 2 2 2Number of swivel channels quick coupler number 2

Tiltrotator Type TR14NOXControl system unit DF10 DF4 CSPBreaking force max. (ISO) kN/lbf 110 / 24200Tilt torque Nm/ft.lbs 26000 / 19175Rotation speed 1/min 8,5 at 45 l/min / 11.9 GPMRotation torque Nm/ft.lbs 6000 / 4425 constant at 360° continuous

Oil flow extra function 1/2 max. l/min / GPM SD 1): 70/40 / 18.5/10.6 HF 2): 70/120 / 18.5/31.7 SD 1): 70/40 / 18.5/10.6 SD 1): 70/40 / 18.5/10.6

HF 2): 70/120 / 18.5/31.7


rotation: 20 / 2880tilt: 30 / 4320 tilt: 30 / 4320

Recommended pressure in return line MPa/psi 2,5 / 360Number of swivel channels extra function number 4Number of swivel channels quick coupler number 2Number of channels separate drain line number 1Electric swivel (optional) channels x A 12 x 0,5

Tiltrotator Type TR19NOXControl system unit DF10 DF4 CSPBreaking force max. (ISO) kN/lbf 150 / 33000Tilt torque Nm/ft.lbs 34000 / 25075Rotation speed 1/min 8,5 at 50 l/min / 13.2 GPMRotation torque Nm/ft.lbs 7000 / 5162 at 360° continuous


HF 2): 70/120 / 18.5/31.7


rotation: 20 / 2880tilt: 30 / 4320

rotation: 30 / 4320tilt: 30 / 4320


Tiltrotator Type TR25NOXControl system unit DF10 DF4 CSPBreaking force max. (ISO) kN/lbf 170 / 37400Tilt torque Nm/ft.lbs 44000 / 32450Rotation speed 1/min 8,5 at 60 l/min / 15.9 GPMRotation torque Nm/ft.lbs 8000 / 5900 constant at 360° continuous


HF 2): 70/150 / 18.5/39.6


rotation: 20 / 2880tilt: 30 / 4320 tilt: 30 / 4320


1) SD = Standard-swivel 2) HF = High-Flow-swivel

Tiltrotators TR06NOX / TR10NOX / TR14NOX / TR19NOX / TR25NOX



Functions CSP NOXPROP

DF10 DF8 DF4 CSP SVAB

Hydraulic circuit needed 1) 1s 2d - 4d 2d - 3d 2d 1s

Quick coupler hydraulics 2) integrated required required integrated integrated

Control valves in excavator NO YES YES YES NO

Functions tiltrotator T+R+E+C T+R+E(x2)+C T+R+E+C R / T+E+C T+R+E+C

Control valves in tiltrotator 3) YES NO NO YES YES

Number of extra functions 1 / 2 2 1 1 1

Adapted to TR06NOX 4) 5)





left joystick right joystick

left buttonextra function

left proportional controller

right proportional controller

CSP NOXPROPOperators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick Coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP Control System: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included.

Control Systems for NOX TiltrotatorsType Description

CSP NOXPROP Tilt, rotation, extra function proportional; choice of tool or profile via display; configuration via laptop

DF10 All functions are controlled by the excavator directly; max. 5 double acting circuits can be connected; 2 extra functions + quick coupler (6-port swivel)

DF8 All functions are controlled by the excavator directly; max. 4 double acting circuits can be connected; 1 extra function + quick coupler (4-port swivel)

DF42 double acting circuits required. Circuit 1 controls rotation, circuit 2 manages tilt, extra function plus quick coupler. The change between the functions is controlled by integrated solenoid valves. A free ON/OFF button at the joystick is required. The quick coupler is controlled by a security switch on the included display module.

CSP SVAB Tilt, rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controllerControl System CSP consists of: controlbox, 2 joystick grips, wiring from joysticks to Tiltrotator, proportional pressure control valve, display


Description:1s One single acting hydraulic circuit (hammer line)

2d Two double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportional or ON/OFF depending on the machine

3d Three (or two) double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportinal or ON/OFF depending on the machine

T+R+E+C Tilt, rotation, extra function, hydraulic quick coupler

T+R+E(x2)+C Tilt, rotation, 2 x extra function, hydraulic quick coupler

R / T+E+C Circle 1 controls the rotation, circle 2 manages tilt, extra function, hydraulic quick coupler1) Free return line must be available or must be installed for tiltrotator2) Most quick couplers need a double acting hydraulic circuit. Please always specify LQC model and hydraulics before choosing controlling system

3) Only with CSP control system all functions will be controlled by directional valves in the tiltrotator. All other DF control systems must have 6/2 directional valves in order to split circuits. 6/2 directional valves are not included in the prices. Also 2/2 directional valve to operate a hydraulic LQC must be installed on the machine and is not included in the price.

4) 2 extra functions possible5) 1 extra function possibleNote: - mechanical LQC can be used with all control systems

- hydraulic upper quick coupler must be controlled separately and not by the standard control system

Pictures

Proportional Control Systems


RST03

B

C

E

A

Ballast Tamper RST03

Type Gripping Weight Length Height C Width Gripper Compaction Operatingrange A B (with adapter) E elements force weight(mm / in) (kg / lbs) (mm / in) (mm / in) (mm / in) (pieces) (kg /lbs) (t / lbs)

RST03 195 - 650 / 640 / 830 / 1310 / 525 / 4 7500 / 5 - 24 /7.83 - 25.59 1408 32.68 51.57 20.67 16500 11000 - 52800

Package consists of: ballast tamper, vibrating unit, bolt-on or standard adapter for nordic style S-coupler**other adapters available on request

Using a RST03 Ballast Tamper mounted especially efficient to a NOX tiltrotator, the packing of ballast under sleepers is not only fast, but also efficient and economical – ideal for road-rail excavators with 5t - 24t / 11000 - 52800 lbs operating weight.

l Low weight.l Complete with high frequency vibrating unit.l Efficiency: the strong, silent compressor destabilizes the gravel ballast,

while the built-in vibration unit is running. The four arms are thrust into the gravel and pack it by vibrating. They move alongside and below the sleeper into the ground and tamper optimally.

l Flexibility: adjustable arms and force.l High frequency.l Low noise operation.l Strong vibration rubbers for low vibration against the machine.

l Adjustable tamping depth for concrete sleepers or for steel and timber ties.l Different displacements of engines available according to the recommended oil flow

needed.

Requirements of ExcavatorTwo hydraulic circuits needed, one of them double effective (open / close) and one hammer line (vibration), with free line to the tankOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 40 - max. 130 l/min / 10.57 - max. 34.35 GPMDifferent couplings available

Technical Drawings – Example of Use

Ballast Tamper

VID

EO

1 t 2 t 3 t 4 t 5 t 6 t ... 9 t 10 t 11 t ... 14 t 15t ... 23 t 24 t 25 t 26 t 27 t 28 t


1 t 2 t 3 t 4 t 5 t 6 t ... 12 t 13 t 14 t 15 t 16 t 17 t ... 23 t 24 t 25 t 26 t 27 t 28 t

DT03/22

Double Ballast Tampers DT03/22

Type Length Width Height C Weight Tamping Tilt Gauge Tamping Tamping Compaction D E elements angle F range A depth G force

(mm / in) (mm / in) (mm / in) (approx.kg / lbs) (pieces) (°) (mm / in) (mm / in) (mm / in) (kg /lbs)

DT03/22 2140 / 850 / 1490/ 1800/ 2 x 4 55 1435 195 - 650 / 390-450 / 7500 /84.25 33.46 58.66 3960 56.50 7.68 - 25.59 15.35-17.72 16500

Package consists of: 2 ballast tampers, tiltable at adapter plate, KINSHOFER rotation incl. 2 motors

Note: fits all kinds of rails

Double Ballast Tampers

Requirements of ExcavatorTwo hydraulic circuits needed, one of them double effective (open / close) and one hammer line (vibration) with free line to the tank

Operating pressure (open/close/vibration): 15-20 MPa (150-200 bar) / 2160-2880 psiRecommended oil flow (open/close): 75-max. 100l/min. / 19.82 - max. 26.42 GPM (free line to tank required)Recommended oil flow (vibration): 75 -85 l/min (150bar) / 19.82-22.46 GPMOperation pressure (rotation): max.17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation) 25-max. 60l/min (140bar) / 6.61-max. 15.85 GPM

Different couplings available. Available without upper bracket, too.

Technical Drawings

Using a Double Ballast Tamper DT03/22 with 360° rotation the packing of ballast under sleepers is not only fast, but also highly efficient and economical – ideal for road-rail excavators with 14t / 30800 lbs up to 22t / 48400 lbs.

l Complete with two high frequency vibrating units.l Efficient: the strong, silent compressors destabilize the gravel ballast,

while their built-in vibration units are running. Their four arms are thrust into the gravel and pack it by vibrating. They move alongside and below the sleeper into the ground and tamper optimally.

l Flexibility: adjustable arms and force.l High frequency.l Low noise operation.l Strong anti-vibration rubbers for low vibration against the machine.l 360° rotation incl. 2 motors

l Adjustable tamping depth for concrete sleepers or for steel and timber ties.

C

D

F

E

A

G


KM 632HPX Rail Rail Grapple with HPXdrive

Package Rail Grappple KM 632HPX Rail with KINSHOFER Flange Rotator Type Length Width Height Weight Closing

force (kN / lbf )Load

capacity(mm / in) (mm / in) (mm / in) (kg / lbs) at 26 MPa / 3744 psi (kg / lbs)

KM 632HPX Rail 1000 / 39.37 560 / 22.05 740 / 29.13 265 / 583 34 / 7480 2000 / 4400KM 632HPX Rail + KM 505 1000 / 39.37 560 / 22.05 740 / 29.13 275 / 605 34 / 7480 2000 / 4400

Package consists of: rail grapple, KINSHOFER rotator KM 04 F140-30V, upper suspension KM 501 4500, non-return valvePlease note: the KM 632HPX Rail is also available with a KINSHOFER shaft rotator and quick change system KM 505

AccessoiresType DescriptionKM 04 S KINSHOFER shaft rotator for precise positioning of the load – up to 4500 kg / 9900 lbs load capacityKM 04 S68-30US recommended KINSHOFER shaft rotator for heavy duty tasks – up to 4500 kg / 9900 lbs load capacityKM 505 quick change system for shaft-type rotator KM 04 SKM 505 HD quick change system HD for shaft-type rotator KM 04 S68-30USKM 502 4500 reduction link between rotator and grappleKM 204 01 mobile part of hydraulic quick coupling for hose (Ø 10 mm, 2 pieces)KM 204 03 hydraulic quick change kit incl. mobile and fixed parts (2 pieces each) mounted with adapters to rotator

Requirements of Loader CraneOperating pressure: 26 MPa (260 bar) / 3744 psiRecommended oil flow: 25 - max. 75 l/min / 6.61 - max. 19.82 GPM

Technical Drawings – Examples of Use

The Rail Grapple KM 632HPX Rail with its HPXdrive is used for the loading and unloading of rails, but also, with care, handle single sleepers. A non-return valve secures constant pressure even in case of unexpected pressure drop. The revolutionary HPXdrive technology guarantees a reliable and virtually maintenance free attachment. – The gripper is ideal for mobile loader cranes as well as for rigidly mounted loader cranes on maintenance trailers.l Reliability of the HPXdrive! The movement of the arms of the grapple is generated

by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No more hydraulic cylinder.

l Longer life cycle up to 50%! Self-lubrication: The drive unit runs in a permanent oil bath. The compact design makes the HPXdrive resistant to dirt and debris.

l Versatility with different types of shells that can easily be refitted onto the driving unit.

l Profitability through low maintenance costs and longer life cycle.l Rotator with shaft KM 04 S is available as an alternative, in case a quick change

KM 505 (or a reduction piece KM 502 f.ex. for a non-rotating hook) is required.l Constant closing force (34 kN /7480 lbf at 26 MPa / 3744 psi operating pressure)

during the entire opening and closing process.

Type: S49

120

Type: 60E1Type: UIC 54 Type: UIC 54

149

1000300

740

560

47

55

KM 632HPX Railholding a rail

(here with optional shaft rotator and reduction piece)

KM 632HPX Railholding a concrete sleeper

(here with optional shaft rotator and reduction piece)

KM 632HPX Rail(with regular flange rotator)


Universal Railroad Grapple with Vertical Cylinders

Universal Railroad Grapple KM 632Rc

Type Capacity Width Opening Height Height Gripping range Self Load ClosingE A max. C max. C min. D min. weight capacity force

(m² / cords) (mm / in) (mm / in) (mm / in) (mm / in) (mm / in) (kg /lbs) (kg /lbs) (kN / lbf )KM 632R-0.25 c 0.35 / 0.25 600 / 23.62 1750 / 68.90 1370 / 53.94 1070 / 42.13 76 / 2.99 440 / 968 3000 / 6600 22.50 / 4950KM 632R-0.33 c 0.50 / 0.33 600 / 23.62 1980 / 77.95 1500 / 59.05 1195 / 47.05 76 / 2.99 465 / 1023 3000 / 6600 19.40 / 4268KM 632R-0.50 c 0.75 / 0.50 600 / 23.62 2440 / 88.19 1700 / 66.93 1270 / 50.00 76 / 2.99 600 / 1320 3000 / 6600 15.30 / 3366

Package consists of: universal railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses, upper suspension KM 501 4500, non-return valve, central lifting eye.

Accessories

Type Description

KM 505 HD heavy duty quick change system set for KINSHOFER shaft rotators, incl. hydraulic couplingsKM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)

Requirements of Loader CraneOperating pressure (open/close): max. 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings

A

D

E

C m

ax C m

inDesigned to handle the various demands of the rail, the Universal Railroad Grapple with verical cylinders KM 632Rc can be used for rails and railroad ties / sleepers – and even for clearing brush. This robust and versatile tool is optimal for use on loader cranes.

l The Universal Railroad Grapple is ideal for handling used sleepers or rails – single or bundled.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties – directly from gondola cars.l Exchangeable gears are standard and ensure synchronized movement of tines.l Each arm is equipped with a heavy duty hydraulic cylinder, providing an

extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Safety: a special holding valve provides a safe grip – even if pressure drops.l Central lifting eye included with 3000 kg / 6600 lbs load capacity.

KM632Rc


E

D

C m

inC

max

A

KM 206optional

Universal Railroad Grapple with Horizontal CylindersDesigned to handle the various demands of the rail, the Universal Railroad Grapple with horizontal cylinders KM 632-2-R can be used for rail or ties. This robust and versatile tool is optimal for use on loader cranes.

l The Universal Railroad Grapple is ideal for handling used sleepers and rails – and even for clearing brush.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties - directly from gondola cars.l Gears are standard and ensure synchronized movement of tines.l The tool is equipped with two horizontal hydraulic cylinders, providing an extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Safety: a special holding valve provides a safe grip – even if pressure drops.

KM632-2-R

Universal Railroad Grapple KM 632-2-R

Type Capacity Width Opening A Height Height Gripping range Self Load ClosingE max. C max. C min. D min. weight capacity force

(m² / cords) (mm / in) (mm / in) (mm / in) (mm / in) (mm / in) (kg / lbs) (kg / lbs) (kN / lbf )KM 632-2-R 0.50 / 0.33 600 / 23.62 1980 / 77.95 1430 / 56.30 1150 / 45.28 85 / 3.35 355 / 781 3000 / 6600 14 / 3080

Package consists of: universal railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses, upper suspension KM 501 4500, non-return valve

Accessories

Type Description

KM 505 HD quick change system set for KINSHOFER shaft rotators, incl. hydraulic couplingsKM 685 05 adapter for compression rails (load capacity max. 250 kg / 550 lbs)KM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)KM 685 central eye welded eye (1 piece)

Requirements of Excavator

Operating pressure (open/close): max. 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings


Sleeper Changing Unit with Ballast Shield


RBS20

815

A A

140

258

Internal pads and adjustable plunge depth allow the gripping of MonoBloc sleepers of different sizes and material (concrete, wood)

External pads to grip BiBloc concrete sleepers by opening the hydraulical gripper

Multi Purpose Sleeper Changing Unit RBS 20 for the extraction and exchange of railway ballast and concrete or wooden sleepers of different shapes and sizes. The RBS 20 with Ballast Shield is ideal for road rail excavators with 12t - 24t / 26400 - 52800 lbs operating weight.

l Efficiency: the large shield with buckets clears the track from the ballast. The sleeper is then grabbed by the hydraulically operated gripper and pulled out from the ballast bed. Once the new sleeper is placed, the shield is used to bring back and level the ballast again. Rational use.

l BiBloc-Sleepers can be handled by opening the hydraulic gripper and thus clamping the sleeper.l Safety: a special holding valve provides a safe grip – even if pressure drops.l Reduced wear due to the use of HARDOX quality steel.l Bolt-on adapter: upper brackets for different quick coupling systems available.l 360° endless rotation due to the integrated 15t-rotator.l Adjustable plunge depth for more flexibility (depending on sleeper height).l 3 bolt-on ballast buckets, exchangeable in a few minutes.

Sleeper Changing Unit RBS20 with Ballast Shield

Type Gripping Weight Length Height Width Gripper Load Operatingrange A D C E elements capacity weight(mm / in) (kg / lbs) (mm / in) (mm / in) (mm / in) (pieces) (kg / lbs) (t / lbs)

RBS20 240 - 300 / 1250 / 2800 / 1340 / 1840 /

42000 / 12 - 24 /

9.45 - 11.81 2750 110.24 52.76 72.44 4400 26400 - 52800

Package consists of: sleeper changing unit with ballast shield and 3 bolt-on ballast buckets, KINSHOFER rotator KM 15 F273/273, non-return valve

Note: different couplers available

Requirements of ExcavatorTwo hydraulic circuits needed

Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotate): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (rotate): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings – Examples of UseC D

E

880

575

880



D

A m

ax

E

C

RBS 20HPXMulti Purpose Sleeper Changing Unit RBS 20 HPX for the extraction and exchange of railway ballast and concrete sleepers (B55/58 or B70), as well as wooden or steel sleepers of different shapes and sizes. The RBS 20 HPX with Ballast Shield and HPXdrive is ideal for road rail excavators with 12t - 24t / 26400 - 52800 lbs operating weight.l Efficiency: the large shield with buckets clears the track from the ballast.

The sleeper is then grabbed by the hydraulically operated gripper and pulled out from the ballast bed. Once the new sleeper is placed, the shield is used to bring back and level the ballast again. Rational use.

l Safety: a special holding valve provides a safe grip – even if pressure drops.l Reduced wear due to the use of HARDOX quality steel.l Bolt-on adapter: upper brackets for different quick coupling systems available.l HPXdrive: maintenance-free and cylinderless drive unit with exchangeable shell system.l 360° endless rotation due to the integrated 15t-rotator.l Adjustable plunge depth for more flexibility (depending on sleeper height).l 3 bolt-on ballast buckets, exchangeable in a few minutes.

Sleeper Changing Unit with Ballast Shield and HPXdrive

Sleeper Changing Unit RBS20 HPX with Ballast Shield and HPXdrive

Type Gripping Weight Length Height Width Gripper Load Operatingrange A D C E elements capacity weight(mm / in) (kg / lbs) (mm / in) (mm / in) (mm / in) (pieces) (kg / lbs) (t / lbs)

RBS 20HPX 270 - 570 / 1250 / 2800 / 1340 / 1670 /4

2000 / 12 - 24 /10.63 - 22.44 2750 110.24 52.76 65.75 4400 26400 - 52800

Package consists of: sleeper changing unit, ballast shield and 3 bolt-on ballast buckets, KINSHOFER rotator KM 15 F273/273 and HPXdrive, non-return valve

Note: different couplers available

Requirements of ExcavatorTwo hydraulic circuits needed

Operating pressure (open/close): max. 20 MPa (200 bar) / 2880 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotate): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (rotate): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings – Examples of Use


1 t 2 t 3 t 4 t 5 t 6 t ... 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t ... 25 t 26 t 27 t 28 t

KM 333 SleeperThe Sleeper Loading Grapple KM 333 Sleeper can grip and load five concrete sleepers simultaneously. The hydraulic unit is ideal for excavators with an operating weight of 10t -16t / 22000 - 35200 lbs or for appropriate loader cranes.

l Low weight.l Efficiency: Five concrete sleepers are clamped together at the

same time by two hydraulic compression rails and then layed into the ballast bed. The loading / unloading of five sleepers simultaneously saves time compared to individual handling.

l Precise synchronisation of the arms as a result of two in series double acting hydraulic cylinders.

l Safety through internal pressure relief valve (independent from crane pressure) and non-return valve (safe clamping force at pressure drop).

l Flexibility: All railway sleepers B70W / B58W / BS66 can be taken thanks to an extremely wide and variable gripping area (1795 - 2865 mm).

l Long life due to generously dimensioned bearings, integrated grease reservoir, automatic wear compensation of main bearing, spherical central bearing for the cylinders.

Sleeper Loading Grapple

Packages Sleeper Loading Grapple KM 333 SleeperE (Excavator) / KM 333 Sleeper (Loader Crane)

Type Plunge depth Load capacity Gripping area Height Self weightmin. - max. (incl. rotator)

(mm / in) ( kg / lbs) (mm / in) (mm / in) (kg / lbs)KM 333 SleeperE 400 / 15.75 2500 / 5500 1795 - 2865 / 70.67 - 112.80 890 / 35.04 530 / 1166KM 333 Sleeper 400 / 15.75 2500 / 5500 1795 - 2865 / 70.67 - 112.80 890 / 35.04 485 / 1067

Excavator Package sleeper loading grapple, KINSHOFER rotator KM 10 F180-50, 2 short hoses KM 203 01, upper suspension KM 501 9t-12t, compression rails (length 1750 mm / 5.74 ft), pressure relief valve, non-return valveconsists of:

Loader Crane sleeper loading grapple, KINSHOFER rotator KM 06 F140-40, 2 short hoses KM 203 01, upper suspension KM 501 6000, compression rails (length 1750 mm / 5.74 ft), pressure relief valve, non-return valve Package consists of:

Note: The stated load capacity does not take into account the constitution of the charge (surface, mode of packing etc.) The load capacity is not valid in the case of low, unbound curbstones or concrete blocks

AccessoriesType Description

KM 10 F180-50 rotator KINSHOFER recommended for KM 333 SleeperE mounted on an excavatorKM 06 F140-40 rotator KINSHOFER recommended for KM 333 Sleeper mounted on a loader crane

Hydraulic Requirements

Operating pressure: 20 - 32 MPa (200 - 320 bar) / 2880 - 4608 psiRecommended oil flow: 25 - max. 75 l/min / 6.61 - max. 19.82 GPM


KM 333 Sleeper for loader crane

1750

5 Spannbetonschwellen / Concrete Sleepers / Traverses en béton

400



RUS05 Sleeper Layer

Sleeper Layer RUS05

Type Gripping Weight Length Height Width Number of Jaw Sleeper Weightrange A approx. B C E grapples width width single

min. - max. sleeper(mm / in) (kg / lbs) (mm / in) (mm / in) (mm / in) (pieces) (mm / in) (mm / in) max. (kg/lbs)

RUS05150 - 265 / 5.91 - 10.43

1020 / 2244

2820 / 111.02

1553 / 61.14

825 / 32.48

5330 / 12.99

300/320 / 11.81/12.60

350 / 770

Package consists of: sleeper layer, kinshofer rotator with hose guard, upper suspension with pendulum damper KM 511, connection plate, counter-balance valve

Requirements of ExcavatorThree hydraulic circuits or two hydraulic circuits plus one solenoid valve neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 50 - max. 75 l/min / 13.21 - max. 19.82 GPMDifferent couplings available

Technical Drawings

With the Sleeper Layer RUS concrete sleepers can be taken at their center and then be moved easily and effectively – for road rail excavators from 12t - 24t / 26500 - 52800 lbs) operating weight.

l Synchronized gripping arms embrace the sleepers.l Efficiency: several concrete sleepers are clamped together at their center at the same

time by hydraulic grippers and then layed into the ballast bed. This saves time compared to placing sleepers individually.

l Safety: a special holding valve provides a safe grip – even if pressure drops.l Variable gripping range: the position of the traversing arms can vary

within the specified range.l Flexibility: suitable for nearly all types of waisted sleepers.

Height stop adjustable. l For narrow areas close to sidetracks and foundations, as the layer grabs

the sleepers in the center.l Precise positioning thanks to the mounted 10t rotator with 4 oil ducts and hose guard.l Optional: rack.

left: with optional rack

right: clamps in the center of gravity

and lays several concrete sleepers in equal distances

KINSHOFEr RotatorContinuous rotation and four oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection

max.(width x pin-Ø) (mm/in) (Nm/ft.lbs) (Nm/ft.lbs)

KM 10 F173-45-4DD 100 x 45 / 3.94 x 1.77 2000 / 1475 12000 / 8850

connection plate

upper suspension with pendulum damper



RUS2 05Sleeper LayerWith the Sleeper Layer RUS2 05 mounted especially efficient to a NOX tiltrotator or similar, concrete sleepers can be taken by their ends and then moved easily and effectively – for road rail excavators from 12t - 24t / 26500 - 52800 lbs) operating weight.

l Efficiency: several concrete sleepers are clamped together at the same time by hydraulic grippers and then layed into the ballast bed. This saves time compared to placing sleepers individually.

l Safety: a special holding valve provides a safe grip – even if pressure drops.

l Variable gripping range: the position of the traversing arms can vary within the specified range.

l Flexibility: suitable for nearly all types of waisted sleepers. Height stop adjustable. Adjustable to different sleeper lengths.

l Precise positioning thanks to the mounted 10t rotator with 4 oil ducts and hose guard.

Sleeper Layer RUS2 05

Type Gripping range Weight Number of Jaw Sleeper Weightfor sleeper length approx. grapples width width single

sleeper(mm / in) (kg / lbs) (pieces) (mm / in) (mm / in) max. (kg/lbs)

RUS2 052400 - 2800 / 94.49 - 110.24

1500 / 3300

5180 / 7.09

300/320 / 11.81/12.60

350 / 770

Package consists of: sleeper layer, kinshofer rotator with hose guard, upper suspension with pendulum damper KM 511, connection plate, counter-balance valve

Requirements of ExcavatorThree hydraulic circuits or two hydraulic circuits plus one solenoid valve neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 50 - max. 75 l/min / 13.21 - max. 19.82 GPMDifferent couplings available

Technical Drawings

KINSHOFEr RotatorContinuous rotation and four oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection

max.(width x pin-Ø) (mm/in) (Nm/ft.lbs) (Nm/ft.lbs)

KM 10 F173-45-4DD 100 x 45 / 3.94 x 1.77 2000 / 1475 12000 / 8850

sleeper length 2400 - 2800 mm / 94.49 - 110.24 in


3-Axes-ManipulatorKM931The 3-Axes-Manipulator KM 931 features maximum maneuverability of your attachments at the loader crane‘s tip – and provides flexibility of the loader crane‘s use in any arc position. For mobile and fix mounted loader cranes.

l 3-axes-manipulator: maneuverability by three hydraulic functions – gripping, rotating and tilting (3rd hydraulic circuit needed). Endless rotation.

l High loads of 500 - 1000 kg / 1100 - 2200 lbs are handled by KINSHOFER-Manipulators.

l Precise positioning by the KINSHOFER rotator with – mechanically acting hydraulic brake for the rotating movement (KM 931-500). – or with a self-locking worm drive (KM 931-1000).

3-Axes-Manipulator KM 931

Type max. Load Slewing Tilting Rotation Self weight(kg / lbs) angle angle (kg / lbs)

KM 931-500 500 / 1100 135° ± 40° 360° endless 200 / 440KM 931-1000 1000 / 2200 130° ± 40° 360° endless 290 / 638

Package consists of: manipulator, KINSHOFER rotator (KM 931-500) or worm drive (KM931-1000), non-return valve

Note: tubes or poles must always be taken at / near their balance point !

Accessories

Type Description

KM 980-2solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 25 Mpa / 3600 psi, oil flow 60 l/min / 15.85 GPM

KM 980-2 csolenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and moun-ting on the KM 931 manipulator – 12 V or 24 V, working pressure max. 25 Mpa / 3600 psi, oil flow 60 l/min / 15.85 GPM


Three hydraulic circuits neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 20 - max. 40 l/min / 5.28 - max. 10.57 GPM


KM 931-500 at a fix crane on a railway wagon (here with a branch saw)

KM 931-500

KM 931-500

KM 931-1000

40°

40°

40°

90°

quick hitch (optional)



Ballast-Brush

Safer working on the track: A SKB-Ballast with complete rubber protection skirts (for DE, FR, GB; for US and NL only front skirts required)

The SKB-Ballast without protection skirts (in Scandinavia) shows better how the ballast brush works

Exchangeable: Rubber brush of the SKB-Ballast

The SKB-Ballast Brush is the perfect excavator-tool for levelling and distributing ballast. Cleaning the track after filling it up with ballast has never been easier. Especially efficient in combination with a NOX tiltrotator. Available for loaders as well. l Wide range of widths: 1000 - 3000 mm / 39.37 - 118.11 in available,

sweep diameter is 950 mm / 37.40 in.l Efficiency: can be equipped with different brushes for different

applications. The same frame can be used for different roller brushes. - Optional: synthetic brush for snow removal available.

l Rubber bristles sweep away ballast without damaging rails or sleepers.

l Optional: Robust rubber skirts avoid unintended spreading of the ballast.

l Two hydraulic motors (both bidirectional: forward & backward).

Ballast Brush SKB-BallastType Bristles Sweep Weight Width Height Depth

length diameter(mm / in) (mm / in) (kg / lbs) (mm / in) (mm / in) (mm / in)

SKB-Ballast 10 330 / 12.99 950 / 37.40 280 / 616 1000 / 39.37 1200 / 47.24 1200 / 47.24SKB-Ballast 15 330 / 12.99 950 / 37.40 350 / 770 1500 / 59.06 1200 / 47.24 1200 / 47.24SKB-Ballast 20 330 / 12.99 950 / 37.40 380 / 836 2000 / 78.74 1200 / 47.24 1200 / 47.24SKB-Ballast 26 330 / 12.99 950 / 37.40 420 / 924 2600 / 102.36 1200 / 47.24 1200 / 47.24SKB-Ballast 30 330 / 12.99 950 / 37.40 475 / 1045 3000 / 118.11 1200 / 47.24 1200 / 47.24

Package consists of: ballast brush, short hoses, rubber skirts

Requirements of ExcavatorOne hydraulic circuit needed

Operating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 60 - max. 200 l/min / 15.85 - max. 52.83 GPMDifferent couplings available

Pictures – Examples of Use

SKB-Ballast

SKB-Ballast

with raised rubber skirt (optional)

VID

EO



Lid OpenerThe LOP Lid Opener is the ideal tool to position cables or hoses in an already existing cable trench – suitable for excavators from 4t - 24t / 8800 - 52800 lbs operating weight. Does three jobs in one move: Opening the lid, laying or pulling out the cable, closing the lid after this.

l Low weight.l Efficiency: opens and closes the lid in one single movement.l Flexibility: adjustable for different cable trenches.l Easy handling.l LOP 02: optionally with turnable upper bracket.

LOP

Lid Opener LOP

Type Weight Length Height Width Trench lid Trench wall Lid Operatingmax. width thickness thickness weight

(kg / lbs) (mm / in) (mm / in) (mm / in) (mm / in) (mm / in) (max. mm / in) (t / lbs)

LOP 02 235 2825 745 630 355 - 535 50 - 70 65 4 - 24517 111.22 29.33 24.80 13.98 - 21.06 1.97 - 2.76 2.56 8800 - 52800

LOP 05 210 2825 745 630 355 - 535 50 - 70 65 4 - 24462 111.22 29.33 24.80 13.98 - 21.06 1.97 - 2.76 2.56 8800 - 52800

Package consists of: lid opener


VID

EO


1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t 13 t ... 19 t 20 t 21 t 22 t 23 t 24 t

SP20HThe SP20H Double Ballast Plough is the ideal tool to collect or spread ballast and gravel – for excavators from 8t - 20 t / 17600 - 44000 lbs operating weight.

l Easy to use: the plough is pushed along the track on the rails while distributing the ballast evenly on the track.

l For different loose materials such as gravel, ballast, etc. l Adjustable plough depth (4 x adjustable).l Different couplings available.l Robust construction without protruding parts.l Side flaps tiltable ± 45°.

Double Ballast Plough SP20H

Type Weight Length Height C Width For rail Tilt angleB max. (w/o coupling) E max. distance side flaps

(kg / lbs) (mm / in) (mm / in) (mm / in) (mm / in) (°)

SP20H1150 / 2530

2120 / 83.46

750 / 29.53

3200 / 125.98

1505 / 59.25

± 45

Package consists of: double ballast plough

Double Ballast Plough

Requirements of ExcavatorTwo hydraulic circuits required.

Operating pressure (tilt flaps): max. 20 - 32 MPa (200 - 320 bar) / max. 2880 - 4608 psiRecommended oil flow (tilt flaps): 25 - max. 75 l/min / 6.61 - max. 19.82 GPM

Technical Drawings


Robust grabs for excavators with revolutionary exchange system in a single device. As a new demand on site arises, the attachment can be exchanged and the new application can commence. Easy remounting of shells for excavating, landscaping, laying pipes, logging, rail track handling etc.

l Efficiency: only the shells are replaced; exchange is possible with only one person.l Fastness: easy exchange of the lynch pin from the change-over system

within 4 minutes, no hydraulic work necessary.l Robust technics: compact design through the integrated rotator. Robust shell

bearing with coexisting change mechanism.

Clamshell buckets with exchangeable shells are available for:l excavators up to 8t/17600 lbs: C08VE/ T08VE/ R08VE and other exchangeable shellsl excavators up to 12t/26400 lbs: C12VE/ T12VE/ R12VE and other exchangeable shellsl excavators up to 18t/39600 lbs: C18VE/ T18VE/ R18VE and other exchangeable shellsl excavators up to 25t/55000 lbs: C25VE and other exchangeable shells

Kinshofer Exchangeable Shell System

Clos

e bu

cket

and

set

it d

own.

M

ount

the

exch

ange

su

ppor

t.

Start

Rem

ove

the

lync

h pi

n fr

om

the

chan

ge-o

ver s

yste

m0.58min.

Rem

ove

the

chan

ge-o

ver p

in

with

ext

ract

ion

tool

.

1.67min.

Posit

ion

the

buck

et c

arrie

r ove

r th

e ne

w a

ttac

hmen

t and

clo

se

the

lock

ing

unit

hydr

aulic

ally

.

2.50min.

Inse

rt th

e ch

ange

-ove

r pin

and

fa

sten

the

lync

h pi

n.

3.75min.

Rem

ove

the

exch

ange

su

ppor

t. Re

ady

for u

se!4 min.

finished!

C-VE

Rock Grab

Pipe Grab

Timber Grab

Clamshell Bucket

Multi Purpose Grab

Well Shaft Grab

Operating Module


1 t 2 t 3 t 4 t 5 t 6 t ... 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t

C18VE Railway SetRobust grapple with exchangeable tools, with two vertical cylinders for excavators with an operating weight of 13t - 18 t / 28600 - 39000 lbs. With the clamshells with a width of 280 mm / 11.02 in ballast can be excavated. The Sleeper & Rail Gripper is used for the re-handling of sleepers and all kinds of rails. All done very effectively – thanks to a quick shell exchange in four minutes.

l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated into the main carrier.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.

l Reduced wear resulting from generously dimensioned bearing system with special coating.

l Safety: a special holding valve provides a safe grip – even if pressure drops.

l Excellent digging characteristics are the result of high closing forces (54 kN / 11880 lbf at an operating pressure of 35 MPa / 5075 psi).

Clamshell Bucket / Sleeper & Rail Gripper

Clamshell Bucket / Sleeper & Rail Gripper C18VE Railway SetType Width E Opening A Height C max. Length F Volume Number Self weight Load

(mm / in)(incl. teeth)

(mm / in)(incl. teeth)

(mm / in) (mm / in) (litre / c.y.)of teeth

(kg / lbs)capacity (kg / lbs)

C18VE + C18VE-28S EG + 280 / 11.02 1350 / 53.15 1500 / 59.06 1020 / 40.16 60 / 0.08 3 580 / 1276 4500 / 9900C18VE-50S RG 500 / 19.69 1265 / 49.45 1400 / 55.12 760 / 29.92 - - 515 / 1133 4500 / 9900

Package consists of: hydraulic main carrier, clamshells with bolt-on teeth, sleeper & rail gripper, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes, exchanging support and extraction tool

KINSHOFER RotationContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection

(width x pin-Ø) max.(mm / in) (Nm) (Nm)

KM 10 F275-60 125 x 60 / 4.92 x 2.36 1500 /1105 14000 / 10326

Accessories

Type Description

KM 501 13t-25t upper suspension without pendulum damperKM 511 13t-25t upper suspension with pendulum damperKSW10 cardanic adapter for „System L-Lock“ KMS10/KHS10 without suspension – up to 19t / 41800 lbsKSW21 cardanic adapter for „System L-Lock“ KMS21/KHS21 without suspension – up to 28t / 61600 lbs

adapters for quick change systems – from other manufacturers or different sizes available on requestKM 680 C12VE/C18VE scraper

Requirements of ExcavatorOperating pressure (open/close): max. 35 MPa (350 bar) / 5076 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings

E

C

F A

C m

ax

A E

F

C18VE main carrier with railroad grab

C18VE with clamshell buckets for ballast


1 t 2 t 3 t 4 t 5 t 6 t ... 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t

Clamshell Bucket for Rigid MountingThe C18VE/RIG is a clamshell bucket with two vertical cylinders, but without rotator for rigid mount on excavators with an operating weight of 13t - 18t / 28600 - 39000 lbs. Above the head plate, an upper bracket for a quick coupler can be mounted directly. Ideal, if used in combination with a tiltrotator and Quick Exchange Shell System C-VE: Changing various shells (types, widths) and other tools in four minutes. l Reinforced: to endure the forces caused by its rigid mounting, the main carrier of this C18VE type is specially reinforced.l An economic solution as only the shells have to be exchanged to suit application –

bucket carrier, hydraulics and bearings are integrated into the main carrier.l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting

edges and a generously dimensioned bearing system with special coating. l Excellent digging characteristics are the result of high closing forces

(42 kN / 9240 lbf at an operating pressure of 35 MPa / 5076 psi).l Option: with special cardanic system, the clamshell can also be mounted

in free suspension under a tiltrotator.l Safe: a non-return valve ensures continuous safety of the load, even if the pressure drops.l Low overall height: ideal for rail applications.

C18VE/RIG

Clamshell Bucket for Rigid Mounting C18VE/RIGType Width E Opening A Height C max. Length Volume Number Self weight Load capacity

(incl. teeth) (incl. teeth) F of teeth(mm / in) (mm / in) (mm / in) (mm / in) (litres) (kg / lbs) (kg / lbs)

C18VE-80/RIG 800 / 31.50 1650 / 64.96 1370 / 53.94 1360 / 53.54 330 / 0.43 9 565 / 1243 4500 / 9900

Package consists of: hydraulic main carrier for rigid mount, clamshells with bolt-on teeth, non-return valve, 2 welded eyes

Requirements of ExcavatorOperating pressure (open/close): max. 35 MPa (350 bar) / 5076 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 25 - max. 75 l/min / 6.61 - max. 19.82 GPM

Technical Drawings

Exchangeable ShellsType Width Opening A max. Height Volume Number Self weight Total Load Closing

E (incl. teeth) Cmax of teeth of shells weight capacity force(mm / in) (mm / in) (mm / in) (litres) (kg / lbs) (kg / lbs) (kg / lbs) (kN / lbf )

C18VE-30S 300 / 11.81 1535 / 60.43 1370 / 53.54 80 / 0.10 3 125 / 275 535 / 1177 4500 / 9900 42 / 9240C18VE-33S 335 / 13.19 1535 / 60.43 1370 / 53.54 125 / 0.16 3 160 / 352 545 / 1199 4500 / 9900 42 / 9240C18VE-40S 400 / 15.75 1535 / 60.43 1370 / 53.54 160 / 0.21 3 180 / 396 565 / 1243 4500 / 9900 42 / 9240C18VE-50S 500 / 19.69 1535 / 60.43 1370 / 53.54 200 / 0.26 5 195 / 429 580 / 1276 4500 / 9900 42 / 9240C18VE-60S 600 / 23.62 1535 / 60.43 1370 / 53.54 245 / 0.32 5 225 / 495 610 / 1342 4500 / 9900 42 / 9240C18VE-80S 800 / 31.50 1535 / 60.43 1370 / 53.54 330 / 0.43 9 275 / 605 660 / 1452 4500 / 9900 42 / 9240C18VE-100S 1000 / 39.37 1535 / 60.43 1370 / 53.54 415 / 0.54 9 325 / 715 710 / 1562 4500 / 9900 42 / 9240

AccessoriesType Description

KM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsOQ60 bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsKSW10 rigid bolt-on-adapter for „System L-Lock“ KMS10/KHS10 for rigid mounting – up to 19t / 41800 lbs

adapters for quick change systems – from other manufacturers or different sizes available on requestKM 680 C12VE/C18VE scraperKM 695 18t cardanic adapter for cardanic mounting - up to 18t / 39600 lbs

Note: various shells (types and dimensions) and more attachments available.

FE

Cm

ax

A

C18VE rigid with head plate for

rigid mount

FE

Cm

ax

A

FE

Cm

ax

A

Optional: Cardanic

joint for use on C18VE

rigid with a tiltrotator



Fork Set GAF

Fork Set GAF

Type max. Load Width Self weight Tine Operatingcapacity length weight(kg / lbs) (mm / in) (kg / lbs) (mm / in) (t / lbs)

GAF 6 1900 / 4180 1000 / 39.37 140 / 308 1400 / 55.12 3 - 6 / 6600 - 13200GAF 8 1900 / 4180 1200 / 47.24 190 / 418 1400 / 55.12 6 - 8 / 13200 - 17600GAF 12 2500 / 5500 1200 / 47.24 200 / 440 1400 / 55.12 9 - 12 / 19800 - 26400GAF 18 4000 / 8800 1200 / 47.24 340 / 748 1400 / 55.12 13 - 18 / 28600 - 39600GAF 20 4000 / 8800 1200 / 47.24 420 / 924 1400 / 55.12 19 - 20 / 41800 - 44000GAF 24 5000 / 11000 1200 / 47.24 440 / 968 1400 / 55.12 21 - 24 / 46200 - 52800

Package consists of: mechanically adjustable fork, standard suspension for nordic style S-coupler**other adapters available on request

Please note: put loads always the nearest to the back and to the centre of gravity


Different couplings optionally available. The excavator must be conform to lifting regulations.


Lifting, moving and positioning of palletized or unpalletized materials is easy with the GAF Fork Set. Turn your excavator into a fork lift truck. Suitable for excavators with 3t - 24 t/ 6600 - 52800 lbs operating weight.

l High lifting capacity. l Lightweight.l Highly economical: good value for money.l Adapted for being used with a tiltrotator:

best handling in this combination. l Mechanically adjustable forks.l Easy to connect by quick coupler adapter.l Wide range of quick coupling adapters:

S30 to S80 and/or B18 to B30.

GAF 18


1 t 2 t 3 t ... 21 t 22 t 23 t 24 t 25 t 26 t 27 t 28 t 29 t 30 t 31 t 32 t 33 t 34 t 35 t 36 t

RC 30 Mobile Rail Cutter

Mobile Rail Cutters RC 30Type Service weight Length Jaw opening Jaw depth Heavy Duty Operating

(w/o adapter) A B C Rotation weight*(kg/lbs) (mm/in) (mm/in) (mm/in) (t/lbs)

RC 30 2650 / 5830 2335 / 91.93 225 / 8.86 190 / 7.48 360° 22 - 35 / 48400 - 77000* decisive for the mounting of the shear is the payload of the excavator


Operating pressure (open/close) : max. 26 MPa (260 bar) / 3744 psi back pressureRecommended oil flow (open/close) : 150 - max. 250 l/min / 39.63 - max. 66.05 GPM 0,5 MPa (5 bar) / 72 psiOperating pressure (rotate) : max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotate) : 18 - max. 25 l/min / 4.76 - max. 6.61 GPM


The mobile Kinshofer Rail Cutter RC 30 is a special development for the controlled demolition of rail systems and for the scrap preparation of railway lines. All current Vignol rails (flat bottom rails) with a standard quality up to 900 N/mm² and a profile size „S7“ to „UIC 60“ can be cut. Vignol rails in special qualities exceeding 900 N/mm² or with head hardening are excluded. The wear of the cutters highly depends on the quality of the rails. The mobile Rail Cutter RC 30 is ideal for excavators with an operating weight of 22t - 35t / 48400 - 77000 lbs.

l patented DemaPower cylinder.l Large heavy duty bearings for reduced bushing wear.l Housing made of extremely resistant special steel.l Heavy duty 360° rotation.


KINSHOFER is a manufacturer of rotators for excavators, truck loaders and logging operations. Many years of experience in designing rotators and hydraulic load handling equipment allow the production of very efficient and long lasting rotators, specially tailored to each operational requirement.

l Wide range: depending on the usage and carrier unit the load capacity – up to 15t / 33000 lbs – and the design – a rotator with flange or with shaft is possible to use.

l ”Gear-type“-design: ensures very compact and powerful rotators. Precise control of approach and stop – even at a high oil temperature.

l Endless rotation with integrated oil ducts for one hydraulic circuit as standard; rotators with four oil passages are also available.

l The pressure relief valve allows the rotator independence from the hydraulic system of the excavator and prevents overstressing.l Safe admission of pressure, move and bending load through big dimensioned roller bearings.l Minimization of abrasion: by using high quality tempered steel, the outer surface is hardened through a nitrate-coating.

KINSHOFER Rotator Line

Product Range Rotators

Type Load capacity Hole pattern Torque Moment ofdeflection max.

Hydraulic connection Weight(width x Ø of pin) Rotator Grab

(kg/lbs) (mm/in) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 04 F140-30USE 4500 / 9900 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270 M 18x1,5 M 18x1,5 31 / 68KM 04 F140-30VE 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 06 F140-40 6000 / 13200 84 x 40 / 3.31 x 1.57 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F180-40 7000 / 15400 84 x 40 / 3.31 x 1.57 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 76 / 167KM 10 F173-45E 10000 / 22000 100 x 45 / 3.94 x 1.77 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 65 / 143KM 10 F173-52E 10000 / 22000 136 x 52,2 / 5.35 x 2.06 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 69 / 152KM 10 F180-50 10000 / 22000 110 x 50 / 4.33 x 1.97 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 78 / 172

Product Range Rotators Without Head Plates

Type Load capacity Torque Moment ofdeflection max

Hydraulic connection WeightRotator Grab

(kg/lbs) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F140/150 4500 / 9900 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 34 / 75KM 06 F 140/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 38 / 84KM 06 F173/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F275/180 7000 / 15400 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 10 F173/180 10000 / 22000 2000 / 1475 12000 / 8850 G 1/2“ M 27x2 60 / 132KM 10 F214/180 10000 / 22000 1000 / 740 12000 / 8850 G 1/2“ M 16 37 / 81KM 10 F275/180V 10000 / 22000 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 15 F340/220 15000 / 33000 3000 / 2215 25000 / 18440 G 1/2“ G 3/4“ 160 / 352KM 15 F273/273 15000 / 33000 2000 / 1475 50000 / 36875 G 1/2“ G 3/4“ 71 / 156

Head Plates for Rotators

Type Type of rotator Load capacity Width of eye Pin diameter(kg/lbs) (mm/in) (mm/in)

KM 692 4t-6t 30 KM 04 F140/150 4500 / 9900 84 / 3.31 30 / 1.18KM 692 4t-6t 40 KM 06 F173/180 6000 / 13200 84 / 3.31 40 / 1.57KM 692 7t-10t 40 KM 07 F275/180 7000 / 15400 84 / 3.31 40 / 1.57KM 692 7t-10t 50 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 110 / 4.33 50 / 1.97KM 692 7t-10t 60 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 125 / 4.92 60 / 2.36KM 692 15t 70 273 KM 15 F273/273 15000 / 33000 180 / 7.09 70 / 2.76KM 692 15t 70 340 KM 15 F340/220 15000 / 33000 180 / 7.09 70 / 2.76

KM 04 F KM 04 F USE KM 06 F140-40 KM 10 F214/180 KM 10 F275-50 KM 15 F 273/273


FORGED HOOD EARS The earth drill hood ears are forged to cope with the heavy strain of daily use. All hood pins are locked for extra safety making it almost impossible for the hood to detach from your hitch.

HOSE & COUPLER OPTIONS All earth drills come standard with high quality hoses and couplers (excludes larger units).

HIGH QUALITY HYDRAULIC MOTORSAuger Torque‘s huge buying power means we work closely with companies such as Eaton in America to develop the most reliable attachments available on the market today. Unlike some manufactures all our Eaton motors are in fact USA made.

EPICYCLIC GEARBOX The torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motor‘s output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.

NON-DISLODGEMENT SHAFT Unique to Auger Torque, the Non-Dislodgement Shaft (NDS) is a single piece drive shaft assembled top down and locked into the earth drill housing. This design guarantees that the shaft will never fall out, making for a safer work environment, not only for the operator but also any surrounding workers, a MUST-HAVE FEATURE for any safety conscious company.

For more information about earth drills, augers and other attachments for landscaping & snow removal catalogue „ EARTH DRILLS, TRENCHERS AND OTHER ATTACHMENTS“

Product Information Earth Drills


TELESCOPIC EXTENSION

The use of a telescopic extension speeds up the process for drilling an extended depth hole. As the telescopic extension is stored inside the auger, storage space is reduced to a minimum. In addition to the standard fixed lenght extension, Auger Torque produces a range of telescopic extensions for the S5 and PA ranges.

CONSTANT SPIRAL TOOTH CONFIGURATION

In addition to the ”constant spiral tooth configuration“ the angle of the tooth holder has also been considered. By optimizing the angle of cut, spoil is directed into the path of the auger flighting in a more efficient way.

CHANGEABLE WEAR PARTS

Shock LockTM Augers feature tooth holders which can take both earth and tungsten teeth. Interchangeable pilots allow for differing ground conditions. Rock teeth with cone locking.

PILOTS & EXTENSIONS

Earth-, tungsten-, extra dig- und rock-pilots available. Tough forged construction, easy fitting. Pilot extensions allow the auger to hold its axis accurately in tough ground conditions. Improves performance on sloping gound.

SHALLOW PITCH FLIGHTS

Piling industry technology. Holds earth on flights on removal. Most efficient ratio between quantity of earth removed and speed of operation.

PATENTED SHOCK LOCK-SYSTEM

Incorporating a shock absorbing rubber element to protect the tungsten carbide on the tooth assembly coupled with a solid locking pin prevent tooth loss.

Product Information Augers


Accessories for Cardanic Mounting of GrabsKM 501 – Upper Suspensions without Pendulum Damper

When ordering please specify excavator modelUpper

Type Operating weight For rotator type connectionof excavator (width x pin-Ø)

(t/lbs) (mm/in)KM 501 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 501 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 501 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 501 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 501 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / rotation C80H 180x70 / 7.09x2.76KM 501 RD50 19 - 60 / 41800 - 132000 rotation C40/C60H & VHD / P30/40/51VHD / T30/T40VHD 225x70 / 8.86x2.76KM 501 RD120 50 - 100 / 110000 - 220000 rotation P80VHD / T80/T100VHD 325x100 /12.80x3.95

KM 511 – Upper Suspensions with Pendulum Damper (can be retrofitted)

When ordering please specify excavator modelUpper

Type Operating weight For rotator type connectionof excavator (width x pin-Ø)

(t/lbs) (mm/in)KM 511 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 511 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 511 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 511 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 511 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / rotation C80H 180x70 / 7.09x2.76KM 511 RD50 19 - 60 / 41800 - 132000 rotation C40/C60H & VHD / P30/40/51VHD / T30/T40VHD 225x70 / 8.86x2.76KM 511 RD120 50 - 100 / 110000 - 220000 rotation P80VHD / T80/T100VHD 325x100 /12.80x3.95

KSW cardanic – Adapter for „System L-Lock“ Grab Exchange System for Cardanic Mounting (incl. cardan link)

Type Suitable for quick coupler Operating weight„System L-Lock“ of excavator

(t/lbs)KSW01 cardanic KMS01/KHS01 up to 2 / 4400KSW03 cardanic KMS03/KHS03 up to 6 / 13200KSW08 cardanic KMS08/KHS08 up to 12 / 26400KSW10 cardanic KMS10/KHS10 up to 19 / 41800KSW21/25 cardanic KMS21/KHS21 / KMS25/KHS25 up to 28 / 61600

Please note: adapters for quick change systems – from other manufacturers or different sizes available on request

Technical Drawings

Grab with cardanic suspension Grab with cardanic suspension and quick exchange system


Accessories for Rigid Mounting of GrabsKM 690 – Adapter for Rigid Mounting

Type Operating weight of excavator

(t/lbs)KM 690 2t up to 2 / 4400KM 690 8t up to 8 / 17600KM 690 15t up to 15 / 33000KM 690 20t up to 20 / 44000KM 690 27t up to 27 / 59400KM 690 32t up to 32 / 70400KM 690 40t up to 40 / 88000KM 690 50t up to 50 / 110000KM 690 70t up to 70 / 154000

KM 691 – Adapter for Specific Solutions

Type Operating weight of excavator

(t/lbs)KM 691 2t up to 2 / 4400KM 691 8t up to 8 / 17600KM 691 15t up to 15 / 33000KM 691 20t up to 20 / 44000KM 691 27t up to 27 / 59400

KSW rigid – Adapter for „System L-Lock“ Grab Exchange System for Rigid Mounting

Type suitable for Operating weight of excavator„System L-Lock“

(t/lbs)KSW01 rigid KMS01/KHS01 up to 2 / 4400KSW03 rigid KMS03/KHS03 up to 6 / 13200KSW08 rigid KMS08/KHS08 up to 12 / 26400KSW10 rigid KMS10/KHS10 up to 19 / 41800KSW21/25 rigid KMS21/KHS21 / KMS25/KHS25 up to 28 / 61600

Please note: adapters for quick change systems – from other manufacturers or different sizes available on request

OQ – Bolt-on Adapter for Oilquick Grab Exchange System for Rigid Mounting

Type Suitable for quick coupler Operating weight of excavatorOilquick quick change system

(t/lbs)OQ45 OQ45 5 – 12 / 11000 - 26400OQ60 OQ60 12 – 18 / 26400 - 39600OQ65 OQ65 14 – 22 / 30800 - 48400OQ70 OQ70 15 – 28 / 33000 - 61600OQ70/55 OQ70/55 18 – 28 / 39600 - 61600OQ80 OQ80 45 – 70 / 99000 - 154000

Note: Adapters for quick-exchange-systems from other manufacturers also available

Technical Drawings

Grab with adapter for rigid mounting Grab with adapter for quick exchange system for rigid mounting

36

KINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

www.kinshofer.com

Upfront, everywhere

Nederland: DEMAREC Demolition and Recycling Equipment B.V.De Hork 325431 NS CuijkTel.: +31 (0)485 442300Fax: +31 (0)485 442120Email: [email protected]

Sverige: RF System AB Furutorpsgatan 6288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: [email protected]

United Kingdom:Auger Torque Europe LimitedHazletonCheltenham, GL54 4DXTel.: +44 (0)1451 861 652Fax: +44 (0)1451 861 660Email: [email protected]

Australia:Auger Torque Australia Pty Ltd.122 Boundary Road, RockleaQueensland 4106Tel.: +61 (0) 7 3274 2077Fax: +61 (0) 7 3274 5077Email: [email protected]

中国:Auger Torque China CO., Ltd.Baozhan Rd, Tongyi Industry ZoneDongwu, Yinzhou, NingboChina 315114Tel.: + 86 (0) 574 8848 8181 Fax: + 86 (0) 574 8848 8687 Email: [email protected]

Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: [email protected]

France: Kinshofer France S.A.R.L.8 Bis, rue Gabriel VoisinCS 4000351688 Reims Cedex 2Tel.:   +33(0) 3 88 39 55 00Fax:   +33(0) 3 88 79 06 75Email: [email protected]

Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525Email: [email protected]

中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: [email protected]

Suomi: Kinshofer Finland OyRealparkinkatu 9 37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)3 6870 466Email: [email protected]

EXA

-KIN

-RA

IL-E

-EU

R-01

17

construction – general construction construction …€¦ · · 2017-01-26construction –...

Documents