construction products catalogue - plucka · pdf fileconstruction products 3 the complete range...
TRANSCRIPT
MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS
CONSTRUCTION PRODUCTS CATALOGUE
© Copyright 2014 Parchem Construction Supplies Pty LimitedThis publication is copyright. All rights are reserved.Reproduction in whole or in part is prohibited without written permission.Application details are provided as a suggestion only of intended use.This catalogue is produced as a guide to the product range. Some items may not be available at all outlets.Owing to a continual product improvement, designs & specifications may be subject to change without notice.
MANUFACTURER AND DISTRIBUTOR OF INDUSTRY LEADING BRANDS
CONSTRUCTION PRODUCTS 3
THE COMPLETE RANGE OF PRODUCTS AND SOLUTIONS FOR THE CONSTRUCTION INDUSTRY…
C O N T E N T S
CONTENTS
Concrete Placement 6
Bar Chairs 7
Concrete Jointing 8-11
Primers 12
Concrete Sealants 12-13
Curing Compounds 16
Evaporation Retarders 17
Release Agents 17
Flooring 18-21
Decorative Coatings 22
Concrete Sealers 22-23
Waterproofing 26-35
Concrete Repair Products 38-41
Protective Coatings 42
Corrosion Protection 43
Grouting 46-47
Chemical Anchors 48
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 9684
CONCRETE PLACEMENT & JOINTING
CONSTRUCTION PRODUCTS 5
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 9686
FORMWORK
PART ID DIMENSIONS MATERIAL
FW2412512G 2.4m x 125mm 12mm Chamfer Galvanised
FW2415012G 2.4m x 150mm 12mm Chamfer Galvanised
FW2417512G 2.4m x 175mm 12mm Chamfer Galvanised
FW2420012G 2.4m x 200mm 12mm Chamfer Galvanised
FW2425012G 2.4m x 250mm 12mm Chamfer Galvanised
FW2430012G 2.4m x 300mm 12mm Chamfer Galvanised
FW3012512G 3.0m x 125mm 12mm Chamfer Galvanised
FW3015012G 3.0m x 150mm 12mm Chamfer Galvanised
FW3017512G 3.0m x 175mm 12mm Chamfer Galvanised
FW3020012G 3.0m x 200mm 12mm Chamfer Galvanised
FW3025012G 3.0m x 250mm 12mm Chamfer Galvanised
FW3030012G 3.0m x 300mm 12mm Chamfer Galvanised
MESH
PART ID DESCRIPTION
MS3001 MESH SL62 6.0M X 2.4M
MS3002 UTE SIZE MESH SL62DM 4.0M X 2.4M
MS3003 MESH SL72 6.0M X 2.4M
MS3004 UTE SIZE MESH SL72DM 4.0M X 2.4M
MS3005 MESH FULL SL82 6.0M X 2.4M
MS3006 MESH SL92 6.0M X 2.4M
MS3010 MESH FULL SL81 6.0M X 2.4M
MS3031 MESH SL52 6.0M X 2.4M
MS3045 MESH SL102 6.0M X 2.4M
MS3068 UTE SIZE MESH SL82 4.0M X 2.4M
CONCRETE FIBRE SPACERS
PART ID MAX FRANK CODE CONCRETE COVER SACK CONT. PIECES
711551 AO3572 35/40/50 250
711550 AO4573 45/55/60 125
Note: spacers available with tie wire on request.Other concrete spacers are available on request. Please contact Parchem for details.
AO
FORM PLY
PART ID DESCRIPTIONS DIMENSIONS PACK QTY
PLY2412171F11 F11 Good One Side 2400 x 1200 x 17mm 50
PLY2412171F14 F14 Good One Side 2400 x 1200 x 17mm 50
PLY2412172F11 F11 Good Two Sides 2400 x 1200 x 17mm 50
PLY2412172F14 F14 Good Two Sides 2400 x 1200 x 17mm 50
PLY2412172F11IMP General Purpose Imported Formply 2400 x 1200 x 17mm 50
FCMS
PART ID COVER PACK QTY
FCM20 20mm 100
FCM25 25mm 100
FCM30 30mm 100
FCM35 35mm 100
FCM40 40mm 100
FCM50 50mm 100
FCM60 60mm 100
FCM65 65mm 100
FCM75 75mm 100
EXTENSIONS
PART ID COVER PACK QTY
FCMX25 25mm 100
FCMX30 30mm 100
FCMX50 50mm 100
FCMX60 60mm 100
FCMX65 65mm 100
FCMX70 70mm 100
BASES
PART ID COVER PACK QTY
FWBASE015 +15mm 100
FWBASE025 +25mm 100
SLAB ON GROUND BASES
PART ID COVER PACK QTY
FCBASE +2mm 100
FAST CLIP MESH SUPPORTS (FCM)
20mm to 70mm
C O N C R E T E P L A C E M E N T
CONSTRUCTION PRODUCTS 7
C O N C R E T E P L A C E M E N T
15-75mm
30mmFAST CLIP ON BAR CHAIRSSmall Head 4mm - 20mm bar.
TOP DECK CHAIRS
ABBOTTOM DECK CHAIRSMesh & large bar supports.
SLAB ON GROUND CHAIRSClip on versions available.
FERRULE SUPPORT CHAIRS
WIRE CHAIR (3 & 4 LEG PLASTIC TIPPED)
PART ID COVER PACK QTY
FCB15 15mm 100
FCB20 20mm 100
FCB25 25mm 100
FCB30 30mm 100
FCB35 35mm 100
FCB40 40mm 100
FCB45 45mm 100
FCB50 50mm 100
FCB60 60mm 100
FCB65 65mm 100
FCB75 75mm 100
PART ID A B PACK QTY
BPDST65/75 65 75 50
BPDST90/100 90 100 50
BPDST110/120 110 120 50
BPDST130/140 130 140 50
BPDST150/160 150 160 50
BPDST170/180 170 180 50
BPDST190/200 190 200 50
BASES
PART ID COVER PACK QTY
BCBASE 130 x 2mm 100
PART ID A B PACK QTY
BPDS15/20 15 20 100
BPDS25/30 25 30 100
BPDS35/40 35 40 100
BPDS45/50 45 50 100
PANEL CHAIRSProvides covers of 50/60mm and 65/75mm to suit popular panel thicknesses of 100,120,130,150 and 170mm.
PART ID COVER PALLET QTY
FCB15 15mm 5000
FCB20 20mm 5000
PART ID A B PACK QTY
BC25/40 25 40 50
BC50/65 50 65 50
BC75/90 75 90 50
BC85/100 85 100 50
PART ID A B PACK QTY
FWSC125/96 125 96 50
FWSC150/96 150 96 50
FWSC175/96 175 96 50
FWSC180/96 180 96 50
FWSC200/96 200 96 50
PART ID SIZE
RB-TH20 20 to 400mm
BA
B
A
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 9688
C O N C R E T E J O I N T I N G
DIAMOND DOWELS
PART ID DESCRIPTION PACKAGING
2500255 1 PIECE DIAMOND DOWEL 6MM 25/carton
2501187 DIAMOND DOWEL 6mm BLACK BULK PACK 500 per pallet
2500256 DIAMOND DOWEL 6MM GALVANISED 25/carton
2501190 DIAMOND DOWEL 6mm GALV BULK PACK 500 per pallet
2500258 DIAMOND DOWEL 6MM STAINLESS STEEL 25/carton
2500250 1 PIECE DIAMOND DOWEL 10MM 15/carton
2501192 DIAMOND DOWEL 10mm BLACK BULK PACK 500 per pallet
2500257 DIAMOND DOWEL 10MM GALVANISED 15/carton
2501195 DIAMOND DOWEL 10mm GALV BULK PACK 500 per pallet
2500259 DIAMOND DOWEL 10MM STAINLESS STEEL 15/carton
CRACK INDUCERS
PART ID DESCRIPTION
2500175 25MM GROUND CRACK INDUCER X 3M
2500180 50MM GROUND CRACK INDUCER X 3M
DOWELS MASTER
PART ID DESCRIPTION PACKAGING
2500284 DOWELMASTER 16MM 100/carton
2500285 DOWELMASTER 20MMX260 100/carton
2500289 DOWELMASTER 16MM N. PLATE 100/carton
2500290 DOWELMASTER 20MM N. PLATE 100/carton
PECAFORMSacrificial composite formwork system, sold per each, priced per each.
PART ID DESCRIPTION
2500649 PECAFORM 2.25MX.6M EACH
2500650 PECAFORM 2.25MX.9M EACH
2500651 PECAFORM 2.4MX1.2M EACH
2500652 PECAFORM 2.4MX1.5M EACH
2500653 PECAFORM 2.4MX1.875M EACH
PVC WATERSTOPSCentrally and externally placed, pvc waterstop profiles for use in cast in-situ concrete.
PART ID DESCRIPTION
720301 SUPERCAST H/F 150MMX15M ROLL
720302 SUPERCAST H/F 200MMX15M ROLL
720303 SUPERCAST H/F 250MMX12M ROLL
720330 SUPERCAST R/G 'R' 150MMX12M ROLL
720340 SUPERCAST R/G 'R' 200MMX12M ROLL
720350 SUPERCAST R/G ‘S’ 250MMX12M ROLL
720360 SUPERCAST R/G ‘R’ 250MMX12M ROLL
CRACK-A-JOINTPre-formed surfaced applied metal crack inducing strip, 3m lengths available plain or capped, sold in lengths only.
PART ID DESCRIPTION
2200116 CRACK A JOINT PLAIN 25MM X 3M
2200117 CRACK A JOINT GREY 25MM X 3M
2200121 CRACK A JOINT BLACK 25MM X 3M
2200122 CRACK A JOINT TERRACOTTA 25MM X 3M
2200123 CRACK A JOINT SANDSTONE 25MM X 3M
2200118 CRACK A JOINT PLAIN 45MM X 3M
2200119 CRACK A JOINT GREY 45MM X 3M
2200126 CRACK A JOINT BLACK 45MM X 3M
2200127 CRACK A JOINT TERRACOTTA 45MM X 3M
2200128 CRACK A JOINT SANDSTONE 45MM X 3M
KEYJOINTSacrificial metal keyjoint system for on ground slabs
USES
Preformed metal Keyjoint is used to form “keyways” along construction joints between adjacent pavement slabs enabling loads to be transferred from slab to slab while allowing differential movement between them. Keyjoints are suitable for forming construction joints in concrete pavements subject to light vehicle traffic, light industrial pavements, driveways, pedestrian walkways.
PART ID DESCRIPTION
2500490 METAL KEYJOINT100MM/3M LENG
2500495 METAL KEYJOINT125MM /3M LENG
2500500 METAL KEYJOINT150MM /3M LENG
2500505 METAL KEYJOINT200MM /3M LENG
2500510 METAL KEYJOINT250MM/3M LENG
HYDROTITEPremium grade, water swellable, waterstop range for use in cast in-situ concrete.
PART ID DESCRIPTION
2200560 HYDROTITE DSS0220 ADH BACK /LM
2200550 HYDROTITE CJ0725-3K ADH / LM
2200555 HYDROTITE CJ1020-2K ADH /LM
LEAKMASTERGun applied, water-swellable, waterstop paste
PART ID DESCRIPTION
2200785 LEAKMASTER / 320ML CARTRIDGE
SWELLABLE WATERSTOPHigh expansion butyl bentonite based hydrophilic waterstop for cast in-situ concrete
PART ID DESCRIPTION
2201110 SUPERSWELL 47B 25MM X 20MM
2500935 SUPERSWELL 19MMX12MMX12MM/M
CONSTRUCTION PRODUCTS 9
C O N C R E T E J O I N T I N G
DOWEL BARSRange of dowel bars in round and square, black and galvanised, priced per each, sold per each.
PART ID DESCRIPTION
2200845 RD DOWELS PLAIN 400MM X 16MM
2200846 RD DOWELS PLAIN 500MM X 16MM
2200847 RD DOWELS PLAIN 600MM X 16MM
2200860 RD DOWELS PLAIN 400MM X 20MM
2200850 RD DOWELS PLAIN 500MM X 20MM
2200855 RD DOWELS PLAIN 600MM X 20MM
2200856 RD DOWELS PLAIN 400MM X 24MM
2200857 RD DOWELS PLAIN 500MM X 24MM
2200858 RD DOWELS PLAIN 600MM X 24MM
2200859 RD DOWELS PLAIN 450MM X 33MM
2200871 RD DOWELS GAL 400MM X 16MM
2200872 RD DOWELS GAL 500MM X 16MM
2200873 RD DOWELS GAL 600MM X 16MM
2200966 RD DOWELS GAL 400MM X 20MM
2200967 RD DOWELS GAL 500MM X 20MM
2500660 RD DOWELS GAL 600MM X 20MM
2500676 RD DOWELS GAL 400MM X 24MM
2500677 RD DOWELS GAL 500MM X 24MM
2500678 RD DOWELS GAL 600MM X 24MM
2500679 RD DOWELS GAL 450MM X 33MM
2500667 SQ DOWELS PLAIN 400MM X 16MM
2500668 SQ DOWELS PLAIN 500MM X 16MM
2500666 SQ DOWELS PLAIN 600MM X 16MM
2500665 SQ DOWEL PLAIN 400MM X 20MM
2500675 SQ DOWEL PLAIN 500MM X 20MM
2500681 SQ DOWELS PLAIN 600MM X 20MM
2500682 SQ DOWELS PLAIN 400MM X 25MM
2500683 SQ DOWELS PLAIN 500MM X 25MM
2500684 SQ DOWELS PLAIN 600MM X 25MM
2200965 SQ DOWELS GAL 400MM X 16MM
2500686 SQ DOWELS GAL 500MM X 16MM
2500687 SQ DOWELS GAL 600MM X 16MM
2500670 SQ DOWEL GAL 400MM X 20MM
2500671 SQ DOWEL GAL 500MM X 20MM
2500691 SQ DOWELS GAL 600MM X 20MM
2500692 SQ DOWELS GAL 400MM X 25MM
2500693 SQ DOWELS GAL 500MM X 25MM
2500694 SQ DOWELS GAL 600MM X 25MM
CONSEAL 231Low expansion sealing gasket for joints in pre-cast concrete.
PART ID DESCRIPTION
2500240 CONSEAL231 19MMX12MMX12MM/M
2500245 CONSEAL 231 25MMX25MMX12MM/M
DOWEL CRADLESDowel cradle systems for concrete slabs and pavements. 3m lengths, sold per each, priced per each.
PART ID DESCRIPTION
2500700 CRADLE P6@450C125MM SLAB
2500705 CRADLE P6@450C150MM SLAB
2500707 CRADLE P6@450C175MM SLAB
2500710 CRADLE P6@450C200MM SLAB
2500701 CRADLE P6@450C125MM SLAB GAL
2500706 CRADLE P6@450C150MM SLAB GAL
2500708 CRADLE P6@450C175MM SLAB GAL
2500711 CRADLE P6@450C200MM SLAB GAL
2501100 CRADLE P10@450C 175MM SLAB
2501105 CRADLE P10@450C 200MM SLAB
2501110 CRADLE P10@450C 250MM SLAB
2501115 CRADLE P10@450C 175MM SLAB GAL
2501120 CRADLE P10@450C 200MM SLAB GAL
2501125 CRADLE P10@450C 250MM SLAB GAL
2500680 CRADLE P10@500C 200MM SLAB
2501130 CRADLE P10@500C 200MM SLAB GAL
2501135 CRADLE P10@600C 150MM SLAB
2501140 CRADLE P10@600C 200MM SLAB
2501145 CRADLE P10@600C 150MM SLAB GAL
2501150 CRADLE P10@600C 200MM SLAB GAL
TAPERED DOWEL CRADLESDowel cradle systems for concrete slabs and pavements. 3m lengths, sold per each, priced per each.
PART ID DESCRIPTION
2501152 TAPERED CRADLE P6 PD3@450C 125mm SLAB
2501155 TAPERED CRADLE P6 PD3@450C 150mm SLAB
2501157 TAPERED CRADLE P6 PD3@450C 175mm SLAB
2501160 TAPERED CRADLE P6 PD3@450C 200mm SLAB
2501162 TAPERED CRADLE P6 PD3@450C 125mm SLABGAL
2501165 TAPERED CRADLE P6 PD3@450C 150mm SLABGAL
2501167 TAPERED CRADLE P6 PD3@450C 175mm SLABGAL
2501170 TAPERED CRADLE P6 PD3@450C 200mm SLABGEL
2501172 TAPERED CRADLE P10 PD3@450C 150mm SLAB
2501175 TAPERED CRADLE P10 PD3@450C 175mm SLAB
2501177 TAPERED CRADLE P10 PD3@450C 200mm SLAB
2501180 TAPERED CRADLE P10 PD3@450C 150mmSLABGAL
2501182 TAPERED CRADLE P10 PD3@450C 175mmSLABGAL
2501185 TAPERED CRADLE P10 PD3@450C 200mmSLABGAL
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96810
C O N C R E T E J O I N T I N G
JOINTFLEXFlexible, closed cell polyethylene joint filler, available in 25m rolls, plain, sold in rolls only, priced per each.
PART ID DESCRIPTION
2200680 JOINTFLEX 25M X 50MM X 10MM
2200690 JOINTFLEX 25M X 75MM X 10MM
2200650 JOINTFLEX 25M X 100MM X 10MM
2200655 JOINTFLEX 25M X 125MM X 10MM
2200660 JOINTFLEX 25M X 150MM X 10MM
2200665 JOINTFLEX 25M X 200MM X 10MM
2200670 JOINTFLEX 25M X 250MM X 10MM
2200675 JOINTFLEX 25M X 300MM X 10MM
2200651 JOINTFLEX 25M x 1M x 10MM
2200695 JOINTFLEX WHITE 25M X 75MM X 10MM
2200700 JOINTFLEX WHITE 25M X 100MM X 10MM
2200692 JOINTFLEX WHITE ADH 25M X 75MM X 10MM
2200694 JOINTFLEX WHITE ADH 25M X 100MM X 10MM
STIFFJOINTSemi-rigid, non-absorbent, closed cell polyethylene joint filler, 2.4m lengths, sold per each, priced per each.
PART ID DESCRIPTION
2201045 STIFFJOINT 2.4M X 50MM X 10MM
2201050 STIFFJOINT 2.4M X 75MM X 10MM
2200980 STIFFJOINT 2.4M X 100MM X 10MM
2200990 STIFFJOINT 2.4M X 125MM X 10MM
2200995 STIFFJOINT 2.4M X 150MM X 10MM
2201030 STIFFJOINT 2.4M X 200MM X 10MM
2201035 STIFFJOINT 2.4M X 250MM X 10MM
2201040 STIFFJOINT 2.4M X 300MM X 10MM
Semi-rigid, non-absorbent, closed cell polyethylene joint filler, 2.4m x 1m sheets, sold per each, priced per each.
PART ID DESCRIPTION
2201025 STIFFJOINT 2.4M X 1M X 7MM
2201000 STIFFJOINT 2.4M X 1M X 10MM
2201005 STIFFJOINT 2.4M X 1M X 12MM
2201010 STIFFJOINT 2.4M X 1M X 15MM
2201015 STIFFJOINT 2.4M X 1M X 20MM
2201020 STIFFJOINT 2.4M X 1M X 25MM
2201022 STIFFJOINT 2.4M X 1M X 30MM
Semi-rigid, non-absorbent, closed cell polyethylene joint filler, cut to size, cut up from sheets, sold per m2, priced per m2.
PART ID DESCRIPTION
SPSJ10 STIFFJOINT 10MM SPECIALS / M2
SPSJ12 STIFFJOINT 12MM SPECIALS / M2
SPSJ15 STIFFJOINT 15MM SPECIALS / M2
SPSJ20 STIFFJOINT 20MM SPECIALS / M2
SPSJ25 STIFFJOINT 25MM SPECIALS / M2
SPSJ40 STIFFJOINT 40MM SPECIALS / M2
Semi-rigid, non-absorbent, closed cell polyethylene joint filler, sold in lengths only, priced per each.
PART ID DESCRIPTION
2500910 STIFFJOINT 1.2M X 75MM X 10MM
2500915 STIFFJOINT 1.4M X 75MM X 10MM
2500920 STIFFJOINT 1.5M X 75MM X 10MM
2500850 STIFFJOINT 1.4M X 100MM 10MM
2200975 STIFFJOINT 1.5M X 100MM X 10MM
2500865 STIFFJOINT 1.4M X 125MM X 10MM
2500870 STIFFJOINT 1.5M X 125MM X 10MM
ADHESIVE JOINTFLEXFlexible, closed cell polyethylene joint filler, available in 25m rolls, adhesive backed, sold in rolls only, priced per each.
PART ID DESCRIPTION
2200165 ADHES. JOINTFLEX 25MX50MMX10MM
2200195 ADHES.JOINTFLEX 25MX75MMX10MM
2200170 ADHES.JOINTFLEX 25MX100MMX10MM
2200175 ADHES.JOINTFLEX 25MX125MMX10MM
2200180 ADHES.JOINTFLEX 25MX150MMX10MM
2200185 ADHES.JOINTFLEX 25MX200MMX10MM
2200160 ADHES. JOINTFLEX 25MX250MMX10MM
2200190 ADHES.JOINTFLEX 25MX300MMX10MM
2200198 ADHES.JOINTFLEX 25MX1000MMX10MM
CONSTRUCTION PRODUCTS 11
C O N C R E T E J O I N T I N G
POLYSTYRENELightweight, versatile material used for a wide variety of applications in the construction industry.
USES
Polystyrene is an economical, compressible filler.Available in sheets, blockouts and cylinders.
PART ID DESCRIPTION
2201090 POLYSTYRENE 2.4M X 1.2M X 10MM/EA
2201095 POLYSTYRENE 2.4M X 1.2M X 20MM/EA
2201100 POLYSTYRENE 2.4M X 1.2M X 50MM/EA
2201085 POLYSTYRENE 2.4M X 1.2M X 100MM/EA
ECCOVOIDCollapsible void former
USES
To separate concrete slabs, ground beams and pile caps etc from unstable expansive soils that can exert significant swelling pressures on structural foundations.
PART ID DESCRIPTION
2501019 ECCOVOID VOIDFORMER 2.4MX.8MX40MM
2501024 ECCOVOID VOIDFORMER 2.4MX.8MX50MM
2501018 ECCOVOID VOIDFORMER 2.4MX.8MX75MM
2501017 ECCOVOID VOIDFORMER 2.4MX.8MX100MM
2501021 ECCOVOID VOIDFORMER 2.4MX.8MX150MM
2501022 ECCOVOID VOIDFORMER 2.4MX.8MX175MM
2501023 ECCOVOID VOIDFORMER 2.4MX.8MX200MM
EXPANDAFOAM BACKING RODMedium density, closed cell polyethylene backing rod range
USES
Expandafoam is a closed cell polyethylene foam rod supplied in circular section cords of varying diameters.
PART ID DESCRIPTION
665120 EXPANDAFOAM ROD 6MMX250M ROLL
665121 EXPANDAFOAM ROD 10MMX250M ROLL
665122 EXPANDAFOAM ROD 13MMX100M ROLL
665123 EXPANDAFOAM ROD 15MMX100M ROLL
665124 EXPANDAFOAM ROD 20MMX60M ROLL
665125 EXPANDAFOAM ROD 25MMX50M ROLL
665126 EXPANDAFOAM ROD 30MMX50M ROLL
665127 EXPANDAFOAM ROD 40MMX2M STRIP
665128 EXPANDAFOAM ROD 50MMX2M STRIP
EMER-SEAL BACKING RODEconomical, low density, open cell, polyurethane, sealant backing rod range
USES
Time saving – its flexibility, elasticity and round shape allows quick, efficient placement into both even and uneven joints. One size of diameter foam can be used in a range of joint sizes.Optimal sealant curing – open cell construction allows air to reach both sides of the sealant, ensuring uniform curing.
PART ID DESCRIPTION
665200 EMER-SEAL BACKING ROD 16MM X 150M ROLL
665201 EMER-SEAL BACKING ROD 22MMX100M ROLL
665202 EMER-SEAL BACKING ROD 29MMX60M ROLL
665203 EMER-SEAL BACKING ROD 38MMX30M ROLL
665204 EMER-SEAL BACKING ROD 50MMX20M ROLL
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96812
P R I M E R S
HILASTIC 44Flexible, one-component, acetoxy cure silicone sealant for glass, ceramics, aluminium.
USES
For sealing joints in glass and window construction, aquariums and display cases, general bonding, sealing and insulation.
PART ID DESCRIPTION
610302 HILASTIC 44 TRANS 300G (20/CTN)
HILASTIC 66Mould and fungus resistant, flexible, one-component silicone rubber sealant for bathrooms & kitchens.
USES
Hilastic 66 is a one-component, non-acid, gun applied silicone rubber sealant which cures rapidly to form a durable, watertight seal.
PART ID DESCRIPTION
610321 HILASTIC 66 WHITE 300G (20/CTN)
HILASTIC 88Neutral cure, one-component silicone sealant, for sheet metal lap joint, gutters, downpipes, etc
USES
Sealing joints in roof and wall sheets, guttering and downpipes, sheet metal water tanks, caravans, annexes and composite structures, suitable for use with laminated glass (nonstructural applications) and timber such as in window manufacture.
PART ID DESCRIPTION
610332 HILASTIC 88 TRANS 300G (20/CTN)
610333 HILASTIC 88 CONCRETE GREY 300G (20/CTN)
610334 HILASTIC 88 BLACK 300G (20/CTN)
PRIMER 4Used on non porous surfaces with Thioflex 600 GG & Thioflex 600 PG.
PART ID DESCRIPTION
665207 PRIMR NO.4 250ML
PRIMER 7Used on porous surfaces with Thioflex 600 PG / GG & Colpor 200 PF.
PART ID DESCRIPTION
665209 PRIMER NO.7 1L
PRIMER 9Used on plastics with Hilastic. Other sealants after testing.
PART ID DESCRIPTION
665212 PRIMER NO.9 250ML
PRIMER 11Used on non porous surfaces with Hilastic.
PART ID DESCRIPTION
665216 PRIMER NO.11 250ML
PRIMER 132 part epoxy primer - Used on porous surfaces with NS 280, Emer-Seal 200; also Emer-Seal PU 40, Thioflex 600 (PG & GG) Emer-Seal CR when sealant in being immersed.
PART ID DESCRIPTION
665221 PRIMER NO.13 A-B/250ML
PRIMER 21Used on porous surfaces with Emer-Seal PU 25 & Emer-Seal PU 40 if required.
PART ID DESCRIPTION
665228 PRIMER NO.21 250ML
PRIMER 10Used on porous surfaces with Hilastic.
PART ID DESCRIPTION
665214 PRIMER NO.10 250MLPRIMERS
CONSTRUCTION PRODUCTS 13
S E A L A N T S
EMER-SEAL PU25High performance, flexible, one component, polyurethane joint sealant.
USES
Sealing joints in concrete panels, fibrous cement products, external cladding panels, blockwork and brickwork. Also in sealing joints around aluminium and timber door and window frames and between metal. Also suitable for sealing sawn joints up to 10 mm wide in concrete floors and pavements.
PART ID DESCRIPTION
620555 EMER-SEAL PU 25 BEIGE 600ML (20/CTN)
620545 EMER-SEAL PU 25 BLACK 600ML (20/CTN)
620525 EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN)
620560 EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN)
620535 EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN)
620530 EMER-SEAL PU 25 WHITE 600ML (20/CTN)
EMER-SEAL MSOne part elastomeric high performance paintable sealant.
USES
Sealing joints in concrete panels, marble, granite blockwork and brickwork. And also for use in sealing joints around aluminium and timber door and window frames and between metal and some plastics.
PART ID DESCRIPTION
620515 EMER-SEAL MS GREY 600ML SAUSAGE
EMER-SEAL PU40Tough, abrasion resistant, one-component, polyurethane joint sealant, trafficable.
USES
For bonding or sealing joints between most construction materials, where a high bond strength is required.
PART ID DESCRIPTION
620601 EMER-SEAL PU 40 BLACK 600ML (20/CTN)
620600 EMER-SEAL PU 40 CONC.GREY 600ML (20/CTN)
620606 EMER-SEAL PU 40 CONCRETE GREY 200L
EMER-SEAL CRHighly chemical resistant, fast cure, durable, one component joint sealant.
USES
For sealing expansion and construction joints exposed to aggressive chemical environments.
PART ID DESCRIPTION
610501 EMER-SEAL CR CONCRETE GREY 600ML
EMER-SEAL ROADSEALHigh performance, low modulus, high joint movement accommodation, one component silicone rubber joint sealant.
USES
For sealing joints in concrete roads, runways, carparks and pavements.
PART ID DESCRIPTION
610402 EMER-SEAL ROADSEAL CONCRETE GREY 600ML
FLAMEX PUFire rated, high performance, flexible, one component, polyurethane sealant for external and internal applications.
USES
Flamex PU is designed for sealing exterior and interior movement joints where a fire rating of up to 4 hours is required.
PART ID DESCRIPTION
620035 FLAMEX PU CONCRETE GREY 600ML
EMER-SEAL CONSTRUCTION SILICONE HMTough, pick and abrasion resistant, one-component silicone sealant / adhesive for civil and industrial applications.
USES
For bonding or sealing joints between most construction materials, where a high bond strength is required.
PART ID DESCRIPTION
610375 EMER-SEAL CON SILICONE HM CON.GREY 600ML
NITOSEAL MB175 (FORMERLY PLASTISEAL)Rubberised bitumen, mastic joint sealant compatible with bitumen based membranes.
USES:
For sealing joints in retaining walls, roofing (sealing horizontal chases, flashings, gutterings and sheet laps), sealing terminations of bitumen based waterproofing membranes.
PART ID DESCRIPTION
600222 PLASTISEAL 600ML
EMER-SEAL CONSTRUCTION SILICONEHigh joint movement accommodation, one-component silicone joint sealant for facade applications.
USES:
For sealing moving or static joints in precast or in-situ concrete, curtain walls and lightweight cladding, tilt-up slabs, brick, blockwork, marble and granite facades, most building materials.
PART ID DESCRIPTION
630100 EMER-SEAL CONST SILICONE CON/GREY 600ML
630104 EMER-SEAL CONST SILICONE BLACK 600ML
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96814
FLOORING & SURFACE TREATMENTS
CONSTRUCTION PRODUCTS 15
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96816
C U R I N G C O M P O U N D S
CONCURE A99Water based acrylic curing compound - conforms to AS3799
USES
Concure A99 is recommended for applications to the surfaces of freshly laid concrete, including renders, structural and mass concrete indoors and outdoors and particularly in situations where other conventional means of wet curing are difficult to maintain.
PART ID DESCRIPTION
900910 CONCURE A99 1000L
909900 CONCURE A99 205L
900909 CONCURE A99 20L
CURING COMPOUNDS
CONCURE X90Waterbased hydrocarbon resin curing compound - conforms to AS3799. Designed to degrade with UV exposure.
USES
Concure X90 is particularly suited to curing large areas of external concrete.
PART ID DESCRIPTION
900802 CONCURE X90 1000L
900801 CONCURE X90 205L
900804 CONCURE X90 20L
CONCURE B90Bitumen and hydrocarbon resin blend emulsified in water. Conforms to AS3799. Ideal primer coat for asphalt or bitumen overlays on concrete roads, bridges or parking decks.
USES
A blend of bitumen and hydrocarbon resins emulsified in water. The impervious film formed by Concure B90 prevents excessive water evaporation, promotes efficient cement hydration, minimises shrinkage whilst increasing durability of the concrete.
PART ID DESCRIPTION
900800 CONCURE B90 200L
900805 CONCURE B90 1000L
CONCURE WB30Water based wax emulsion, curing compound - conforms to AS3799
USES
This system ensures that the emulsion forms a non penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration thus reducing shrinkage and increasing durability.
PART ID DESCRIPTION
163052 CONCURE WB30 CLEAR 1000LT SHUTZ PACK
163055 CONCURE WB30 CLEAR 200L
163050 CONCURE WB30 CLEAR 20L
164075 CONCURE WB30 WHITE 1000L
164070 CONCURE WB30 WHITE 200L
900860 CONCURE WB30 WHITE BULK
INTEGRAL HARDENERSNITOFLOR SICALTOPFloor hardener, silicon carbide / alumina additive - dry shake on.
USES
Nitoflor Sicaltop provides a non-rusting, extremely hard wearing, abrasion and slip resistant surface to new concrete floors.
PART ID DESCRIPTION
402040 NITOFLOR SICALTOP GREY 20KG
NITOFLOR SICALTOP SPREADER
PART ID DESCRIPTION
BM-TV-830 SICALTOP COLOUR SPREADER
CONSTRUCTION PRODUCTS 17
R E V E A L I N G A G E N T S / R E L E A S E A G E N T S
CONCURE AVEvaporative retarder for plastic concrete to reduce shrinkage cracks
USES
Concure AV is recommended for spray application onto the fresh surface of plastic concrete to greatly reduce cracking caused by unfavourable weather conditions.
PART ID DESCRIPTION
444445 CONCURE AV 200L
444444 CONCURE AV 20L
SURFACE REVEALING AGENTS
PRECO RWBSurface revealing liquid for exposed aggregate finish on fresh concrete
USES
Preco RWB is used to reveal aggregate in freshly placed horizontal concrete by delaying the surface set so that the mortar paste may be brushed and washed from between the aggregate particles, after the mass of the concrete has set.
PART ID DESCRIPTION
156080 PRECO RWB 20L
156085 PRECO RWB 200L
PRECO HPre-mixed surface revealing liquid for exposed aggregate finish on fresh horizontal concrete.
USES
Preco H is used to reveal aggregate in freshly placed horizontal concrete by delaying the surface set so that the mortar paste may be brushed and washed from between the aggregate particles, after the mass of the concrete has set. This produces an attractive exposed aggregate finish, or a key for subsequent pours or renders, e.g. floors, driveways, paving, etc.
PART ID DESCRIPTION
155550 PRECO H 205L
155500 PRECO H 20L
PRECO VPre-mixed surface revealing agent for use on vertical or horizontal formwork for exposed aggregate finishes.
USES
Preco V is used to reveal aggregate on vertical or horizontal surfaces of freshly placed concrete, by delaying the surface set so the mortar paste may be removed from between the aggregate particles. This product can be painted onto formwork to produce an exposed aggregate finish for ceilings, walls, pre-cast panels or to provide a mechanical key for subsequent renders, mortars, vertical construction joints, etc.
PART ID DESCRIPTION
155555 PRECO V 20L
FORM RELEASE AGENTEconomical, general purpose formwork and mould release agent
USES
To provide a positive form release and a smooth defect-free finish, suitable for steel, wood or paper forms.
PART ID DESCRIPTION
177000 FORM RELEASE AGENT 20L
177001 FORM RELEASE AGENT 200L
177002 FORM RELEASE AGENT 1000L
RELEASE AGENTS
DURAFLOOR HDLiquid floor hardener / densifier / dustproofer - clear.
USES
On any new or existing internal concrete or masonry surface.
PART ID DESCRIPTION
505001 DURAFLOOR HD 20L
505002 DURAFLOOR HD 5L
505505 DURAFLOOR HD 200L
LIQUID HARDENERS
DURAFLOOR HD-SLiquid floor hardener / densifier / stain resistant / sheen sealer - clear.
USES
On any new or existing internal concrete or masonry surface.
PART ID DESCRIPTION
505003 DURAFLOOR HD-S 20L
505004 DURAFLOOR HD-S 5L
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96818
H A R D E N E R S & U N D E R L A Y S
DURAFLOOR LEVELTOPFloor underlay, self smoothing, levelling mortar for vinyl / carpet / timber (0 - 50 mm thickness).
USES
Durafloor Leveltop is designed as an internal high performance, easily installed underlay which forms a very smooth, hard surface for a variety of floor finishes including carpet, ceramic tiles, rubber, sheet vinyl and timber flooring.
PART ID DESCRIPTION
430092 DURAFLOOR LEVELTOP 15KG
CEMENTITIOUS & RESIN UNDERLAYS
CEMTOP GP ADVANCEDHigh performance floor underlay, self smoothing, levelling mortar for carpet / tiles (2-50 mm thickness) with enhanced flow properties for fast and easy application.
USES
Cemtop GP Advanced is designed as a heavy duty underlaywhich forms a smooth, hard surface for a variety of floorfinishes including carpet and ceramic tiles.
PART ID DESCRIPTION
430088 CEMTOP GP ADVANCED 18KG
NITOMORTAR 903Solvent free, general purpose, epoxy binder system.
USES
Nitomortar 903 can be combined with selected fillers and aggregates to produce epoxy mortars of various consistencies. Also used as a priming system with some Durafloor epoxy flooring products.
PART ID DESCRIPTION
481019 Nitomortar 903 Base Resin 20L
481040 Nitomortar 903 Base Resin 200L
481018 Nitomortar 903 Hardener 10L
481017 Nitomortar 903 Hardener 20L
481065 Nitomortar 903 Hardener 200L
DURAFLOOR LEVELBASEFloor underlay, economical sub-base build mortar (up to 200 mm thickness).
USES
Durafloor Levelbase is designed as a heavy duty sub-base underlay which forms a smooth, hard surface to be used under Durafloor Leveltop and Fosroc Cemtop GP Advanced & XD where deep sections are required.
PART ID DESCRIPTION
430095 DURAFLOOR LEVELBASE 20KG
DURAFLOOR LEVELTOP RAPIDFloor underlay, trowellable, rapid hardening, levelling mortar for carpet / tiles / vinyl (0-50 mm thickness).
USES
Durafloor Leveltop Rapid is designed as a heavy duty floor repair compound which provides a very smooth surface allowing the smooth installation of carpet, ceramic tiles sheet rubber, sheet vinyl and vinyl tiles.
PART ID DESCRIPTION
430105 DURAFLOOR LEVELTOP RAPID 20KG
DURAFLOOR LEVEL PRIMEHigh performance primer for Cemtop XD, Cemtop GP Advanced, Durafloor Leveltop, Durafloor Leveltop Rapid and Durafloor Levelbase.
USES
Concentrated high performance primer for cementitious underlays.
PART ID DESCRIPTION
480005 DURAFLOOR LEVEL PRIME 1L
480016 DURAFLOOR LEVEL PRIME 5L
480017 DURAFLOOR LEVEL PRIME 20L
PRIMERS
CONSTRUCTION PRODUCTS 19
U N D E R L A Y S & T O P P I N G S
DURAFLOOR TFFloor topping, trowel applied, high build epoxy resin system (5 mm thickness).
PART ID DESCRIPTION
405345 Durafloor TF Base Resin15L
405350 Durafloor TF Hardener 5L
405355 Durafloor TF Fillers 20kg
CEMTOP XDCementitious floor topping internal trafficable wear surface (6-12 mm thickness).
PART ID DESCRIPTION
402055 Cemtop XD 15kg
DURAFLOOR V ANTI-SKIDHeavy duty, flow applied, lightweight anti-skid surface dressing.
PART ID DESCRIPTION
400400 Durafloor V Anti-Skid Base 16L Pack
400405 Durafloor V Anti-Skid Hardener 16L Pack
400410 Durafloor V Anti-Skid Fillers 16L Pack
405760 Durafloor Heavy Duty Aggregate 25kg
DURAFLOOR SLFloor topping, industrial, self smoothing epoxy resin system (2-4 mm thickness).
USES
Durafloor SL provides a dense, impervious, coloured and chemically resistant floor surface which is hygienic and easy to clean.
PART ID DESCRIPTION
405400 Durafloor SL Base Resin 16L Pack
405800 Durafloor SL Base Resin 200L
405700 Durafloor SL Hardener 16L Pack
405805 Durafloor SL Hardener 200L
404045 Durafloor SL Fillers 10kg
404047 Durafloor SL Fillers 14kg
FLOOR TOPPINGS
DURAFLOOR SLXFloor topping, industrial, self smoothing epoxy resin system for cold weather application (2-4 mm thickness).
PART ID DESCRIPTION
405900 Durafloor SLX Base Resin 16L Pack
402000 Durafloor SLX Base Resin 200L
405910 Durafloor SLX Hardener 16L Pack
402005 Durafloor SLX Hardener 200L
404045 Durafloor SL Fillers 10kg
404047 Durafloor SL Fillers 14kg
AEGIS MSPCementitious floor topping internal / external trafficable waterproofing surface (2-4 mm thickness).
USES
Aegis MSP is used to provide a strong and durable cementitious coating that can be applied to a wide variety of substrates, including concrete, concrete blocks, polystyrene blocks, aerated concrete blocks (AAC), asphalt and fibre cement.
PART ID DESCRIPTION
752003 Aegis MSP Coarse Grey 20kg
752001 Aegis MSP Fine Grey 20kg
750007 Aegis Surface Primer #1 20L
DURAFLOOR XDurafloor X produces a topping and coating system with a textured finish, which provides a hard-wearing, chemically resistant floor that can handle extreme temperatures. The system also has anti-microbial properties which reduce the growth of bacteria and mould.
USES
Durafloor X has been designed to produce a flooring system for applications that require high resistance to mechanical stress and chemical attack, that are subject to extreme temperatures and need to be applied within a limited timeframe. Typical uses for the system are in wet processing zones in chemical processing plants and food preparation and manufacturing areas.
PART ID DESCRIPTION
405854 DURAFLOOR X COAT PART A - 4.83KG KIT
405855 DURAFLOOR X COAT PART B - 4.83KG KIT
405856 DURAFLOOR X COAT PART C - 4.83KG KIT
405848 DURAFLOOR X PRIMER BASE 10KG KIT
405849 DURAFLOOR X PRIMER HARDENER 10KG KIT
405850 DURAFLOOR XT BASE
405851 DURAFLOOR XT HARDENER
405852 DURAFLOOR XT FILLER 2
405853 DURAFLOOR XT FILLER 1
DURAFLOOR N (NOVOLAC)HIghly chemically resistant Novolac epoxy clear binder produces various coating and topping application systems.
USES
Durafloor N is an all purpose, highly chemically resistant Novolac epoxy coating/topping system suitable for a number of surfaces including concrete, steel and masonry.
PART ID DESCRIPTION
401040 Durafloor N (Novolac) Base 15L
401045 Durafloor N (Novolac) Hardener 10L
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96820
T O P P I N G S & C O A T I N G S
DURAFLOOR HPFloor coating, high performance epoxy, solvent free, non-tainting.
USES
Durafloor HP is a heavy duty, industrial/commercial coating for concrete floors and walls that is attractive and easily cleaned. Highly resistant to chemical attack and the action of forklift vehicular and commercial type traffic.
PART ID DESCRIPTION
414501 Durafloor HP Base Resin 8L Pack
414210 Durafloor HP Special Colour Base Resin 8L Pack
414414 Durafloor HP Special Colour Base Resin 16L Pack
414502 Durafloor HP Hardener 8L Pack
414415 Durafloor HP Hardener 16L Pack
414505 Durafloor HP 4L Pack
414507 Durafloor HP Special Colour 4L
COATINGS
DURAFLOOR HSFloor coating, economical, high build epoxy, 90% solids
USES
Durafloor HS is a heavy duty, commercial abrasion resistant treatment for concrete floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of commercial type traffic.Suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process.
PART ID DESCRIPTION
414600 Durafloor HS Base 8L Pack
414649 Durafloor HS Hardener 8L Pack
DURAFLOOR FCFloor/wall coating, solvent free epoxy, fast cure.
USES
A heavy duty, 100% solids, non-skid surface coating for concrete and steel floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of vehicular and foot traffic.
PART ID DESCRIPTION
414504 Durafloor FC 4L Pack
NITOFLOR FC100Floor sealer, general purpose solvent based, UV stable, acrylic coating.
USES
Nitoflor can be used as a sealer for concrete floors to provide a dustproof and more easily cleaned surface with resistance to penetration of oils and other liquids. Ideal for warehouses, car parks, light industrial buildings, etc.
PART ID DESCRIPTION
410002 Nitoflor FC100 Clear 20L
410001 Nitoflor FC100 Clear 200L
411022 Nitoflor FC100 Special Colour 20L
561574 Nitoflor FC100 T&G Grey 20L
561572 Nitoflor FC100 T&G Grey 200L
NITOFLOR FC120 HBColoured floor coating, chlorinated rubber, UV stable, for trafficable floors and carparks.
USES
Nitoflor FC120 is suitable for use in heavy traffic areas such as light industrial traffic, stairs, fuel station forecourts, driveways and parking stations.
PART ID DESCRIPTION
411050 Nitroflor FC120 HB Black 20L
411070 Nitroflor FC120 HB Silver Grey 20L
NITOFLOR FC130Floor/wall coating, economical, water based epoxy, chemical resistant.
USES
Nitoflor FC130 is used to provide a dust-proof, easily cleaned surface which is resistant to most oils and liquids. It is suitable for use on walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and light vehicular traffic.
PART ID DESCRIPTION
412184 Nitoflor FC130 Base For Colour Packs 3L
412182 Nitoflor FC130 Clear Base 2.9L
412181 Nitoflor FC130 Clear Hardener 13.1L
412196 Nitoflor FC130 Mid Grey Hardener 13L
412183 Nitoflor FC130 Silver Grey Hardener 13L
412215 Nitoflor FC130 Silver Trophy Hardener 13L
412210 Nitoflor FC130 Special Colour Hardener 13L
412180 Nitoflor FC130 Silver Grey 4L Pack
CONSTRUCTION PRODUCTS 21
C O A T I N G S / D E C O R A T I V E F L O O R T O P P I N G S
DURAFLOOR PUSingle pack, high build, clear high gloss, high abrasion resistant polyurethane coating.
USES
Durafloor PU is a high build coating, formulated for both interior and exterior applications to provide a clear, high gloss, high abrasion resistant finish.
PART ID DESCRIPTION
400650 DURAFLOOR PU 5L
400655 DURAFLOOR PU 20L
DURAFLOOR SRModified synthetic rubber based flooring coating.
USES
Specifically formulated to provide quick drying, hardwearing, trafficable surfaces for floors including workshops,storerooms, undercover parking areas et
PART ID DESCRIPTION
561310 DURAFLOOR SR 4L
561311 DURAFLOOR SR 20L
TOPPINGS & COATINGS COLOUR PACKSDURAFLOOR COLOUR PAKSAvailable in Durafloor SL, TF, HS, HP, FC & N
See Durafloor Colour Chart for colours.
PART ID DESCRIPTION
440001 DURAFLOOR COL PAK BANKSIA 0.5KG
440010 DURAFLOOR COL PAK CREAM 0.5KG
440013 DURAFLOOR COL PAK FERN GREEN 0.5KG
440003 DURAFLOOR COLOUR PAK BLACK 0.5KG
440018 DURAFLOOR COLOUR PAK HARBOUR BLUE 0.5KG
440042 DURAFLOOR COLOUR PAK KOALA GREY 0.5KG
440075 DURAFLOOR COLOUR PAK LIGHT GREY BLUE 0.5KG
444000 DURAFLOOR COLOUR PAK OFF WHITE 0.5KG
440026 DURAFLOOR COLOUR PAK PASTEL GREY 0.5KG
440029 DURAFLOOR COLOUR PAK RASPBERRY 0.5KG
440070 DURAFLOOR COLOUR PAK SAFETY YELLOW 0.5KG
440031 DURAFLOOR COLOUR PAK SAND 0.5KG
440017 DURAFLOOR COLOUR PAK SILVER GREY 0.5KG
440059 DURAFLOOR COLOUR PAK WOOLWORTHS RED 0.5KG
440061 DURAFLOOR COLOUR PAK WOOLWORTHS GREY 0.5KG
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96822
D E C O R A T I V E F L O O R T O P P I N G S & C O N C R E T E S E A L E R S
MASTERSHIELD M90Premium Epoxy Commercial Flooring Product.
USES
Premium Polymer flooring product. May be tinted, flaked and other decorative inclusions. Clear product that may be used to suspend objects, graphics or lighting for a novelty feature floor. Chemical resistant - ideal for commercial and industrial floors. FOR INSIDE USE - Special application for outside use.
PART ID DESCRIPTION
MS90A Mastershield - M90 - 6L - Part A
MS90B Mastershield - M90 - 4L - Part B
MS90C Mastershield - M90 - 2L - Part C - Fast Cure Hardener NLA
MS905KIT Mastershield - M90 - 5L Kit
MS90MVA Mastershield - M90 - MV Part A
MASTERSHIELD UA20High Solids, Gloss Urethane Sealer
USES
Used as a high gloss finish and advanced protection over Mastershield polymer flooring, Covacrete, Stampcrete, Stencilcrete and other concrete and masonry surfaces. Also ideal over polished concrete. Exceptional performance for economy.
PART ID DESCRIPTION
UA20A UA20 Urethane Acrylic - 8.7Lt Part A
UA20B UA20 Urethane Acrylic - 1.25Lt Part B
AQUEOUS TINTSColour liquid dispersion of organic and inorganic pigments
USES
For colouring Mastershield M50, Covacrete Base Powder.
PART ID DESCRIPTION
MTBIS Mastershield - Aqueous Tint - Biscuit
MTBON Mastershield - Aqueous Tint - Bone
MTCLA Mastershield - Aqueous Tint - Clay
MTMUS Mastershield - Aqueous Tint - Musk
MTOUT Mastershield - Aqueous Tint - Outback
MTSIL Mastershield - Aqueous Tint - Silver Grey
MTTAN Mastershield - Aqueous Tint - Tan
MTBRWHT Mastershield - Aqueous Tint - White
MTBRBL Mastershield - Aqueous Tint - Black
MTBRTY Mastershield - Aqueous Tint - Bright Yellow
MTBRTR Mastershield - Aqueous Tint - Bright Red
MTBRTG Mastershield - Aqueous Tint - Bright Green
MTBRTB Mastershield - Aqueous Tint - Bright Blue
MASTERSHIELD FLAKEDecorative flooring polymer flake.
USES
Mastershield Polymer Flake is used in decorative Polymer Flooring.
PART ID DESCRIPTION
PFFLA Mastershield Flake - Flake Various NSI
WATERBASED ACRYLIC SEALERThe Green Choice for the environmentally smart consumer. Low odour and ideal for confined spaces or indoor applications.
� Low odour - very low VOC � Good marking resistance � Medium gloss � Self-crosslinking polymer � Water clean up � Tintable
PART ID DESCRIPTION
WBS20 LUSTRESEAL WATERBASED ACRYLIC SEALER 20L
INTERNAL CONCRETE SEALERS
LUSTRESEAL M20Premium Polyurethane, High Solids Sealer.
USES
The toughest sealer in the Lustreseal range - very high gloss and extremely hard. Suitable over Mastershield polymer flooring, Covacrete and other concrete (incl. Stamp/Stencil) and masonry surfaces in thoroughly dry conditions. Also ideal over polished concrete. M20 is a moisture curing single pack polyurethane.
PART ID DESCRIPTION
UA20A UA20 Urethane Acrylic - 8.7Lt Part A
UA20B UA20 Urethane Acrylic - 1.25Lt Part B
DECORATIVE FLOOR TOPPINGS
MASTERSHIELD M50Economical Epoxy Flooring or Surface Primer.
USES
A two pack Aqueous Epoxy that can be used as a primer or as a base for epoxy flooring. May be tinted (aqueous tints), flaked or sprayed in contrasting flecks. Provides a low gloss, satin finish. Highly economical epoxy flooring. FOR INSIDE USE - Special application for outside use.
PART ID DESCRIPTION
MS50A Mastershield - M50 - 5L - Part A - Opaque Base NSI
MS50NTA Mastershield - M50 - 5L - Part A - Neutral Base NSI NLA
MS50B Mastershield - M50 - 5L - Part B - For Opaque and Neutral Bases NSI
CONSTRUCTION PRODUCTS 23
C O N C R E T E S E A L E R S
LUSTRESEAL COLOUR TINTColour liquid dispersion of organic and inorganic pigments.
USES
Lustreseal Colour Tint is added to Lustreseal Acrylic Sealerto give various shades of colour to stamped, stencilled orplain concrete. Can also be used to tint Mastershield M90.
PART ID DESCRIPTION
LSAPR LUSTRESEAL TINT APRICOT 1LTR
LSBAR LUSTRESEAL TINT BARLEY 1LTR
LSBEI LUSTRESEAL TINT BEIGE 1LTR
LSBLA LUSTRESEAL TINT BLACK 1LTR
LSBLU LUSTRESEAL TINT BLUESTONE 1LTR
LSBRI LUSTRESEAL TINT BRICK RED 1LTR
LSBRO LUSTRESEAL TINT BRONZE 1LTR
LSBUR LUSTRESEAL TINT BURGUNDY 1LTR
LSCHA LUSTRESEAL TINT CHARCOAL 1LTR
LSCIN LUSTRESEAL TINT CINNAMON 1LTR
LSCOF LUSTRESEAL TINT COFFEE BROWN 1LTR
LSCRE LUSTRESEAL TINT CREAM 1LTR
LSGRY LUSTRESEAL TINT GREY 1LTR
LSGUM LUSTRESEAL TINT BLUE GUM 1LTR
LSLIG LUSTRESEAL TINT LIGHT TERRACOTTA 1LTR
LSMAR LUSTRESEAL TINT MARIGOLD 1LTR
LSNUT LUSTRESEAL TINT NUTMEG 1LTR
LSROS LUSTRESEAL TINT BLUSHING ROSE 1LTR
LSSAH LUSTRESEAL TINT SAHARA SAND 1LTR
LSSAN LUSTRESEAL TINT SAND 1LTR
LSTER LUSTRESEAL TINT TERRACOTTA 1LTR
LSVIN LUSTRESEAL TINT VINTAGE BUFF 1LTR
LSWHI LUSTRESEAL TINT WHITE 1LTR
ACRYLIC SEALERStandard sealer used for stencil & stamped surfaces. Good all-round concrete sealer.
� Durable � Easy to apply & maintain � Semi gloss finish � High clarity � Tintable
USES
Used as a high quality, gloss protective finish over decorative and other concrete and masonry surfaces. For best results, first prime with Lustreseal Superbond.
PART ID DESCRIPTION
ACR5 SEALER ACRYLIC 5 LT
ACR20 SEALER ACRYLIC 20LT
ACR200 SEALER ACRYLIC 200LT
EXTERNAL CONCRETE SEALERS EXTENDED WEAR PLUSHard wearing, high gloss sealer.
� High durability � Excellent fuel, oil, mould & fungi resistance � Semi gloss - high clarity � Excellent marking resistance
USES
Used for extended longevity in place of Acrylic Sealer for most concrete and masonry surfaces. Provides superior protection from the ingression of dirt, mould, fungi, fuel and oil. High quality wet-look finish. For best results, first prime with Lustreseal Superbond.
PART ID DESCRIPTION
EXT20 SEALER EXTENDED WEAR PLUS 20LT
EXT200 SEALER EXTENDED WEAR PLUS 200LT
SOLVENT
PART ID DESCRIPTION
SOL10 SOLVENT 10 L
SOL20 SOLVENT 20 L
SOL4 SOLVENT 4 L
SUPERBONDSame day prime sealer.
� Excellent moisture tolerance � Priming sealer � High penetration & adhesion � Flexible � Ideal for use as resealing primer � Great for sealing exposed aggregate
USES
Use as same day sealer/primer for concrete and primer for masonry and natural stone surfaces (for porous stone - test before use). Also suitable for resealng - provides essential flexibility between finish coats (See Reseal Guide). Must be over-coated with a finish sealer upon surface curing (with the exception of exposed aggregate).
PART ID DESCRIPTION
SUP20 SEALER SUPERBOND 20LT
SUP200 SEALER SUPERBOND 200LT
MATT FINISH SEALERWhen a natural look is more appealing than a gloss.
� Natural low lustre � Good marking resistance � Hard wearing � Stylish alternative � Tintable
USES
Used as a natural low sheen finish coat for most decorative concrete or masonry surfaces. Popular as an alternative finish for internal floors and also as a natural look finish for resurfaced concrete, stamped impression concrete and stencil concrete. Low lustre masks minor marking and scuffing. For best results, first prime with Lustreseal Superbond. (Not to be used as a first coat primer).
PART ID DESCRIPTION
ACRM20 SEALER MATT FINISH 20LT
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96824
WATERPROOFING
CONSTRUCTION PRODUCTS 25
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96826
P R I M E R S
EMER-ACRYLIC SEALEREconomical, water based concentrate and masonry primer.
USES
Emer-Acrylic Sealer can be used as a primer/sealer coating on concrete, brick, tilt-up panels etc. Provides an even non absorbent substrate over which Emer-impact, Emer-Clad membrane systems and Emer-Acrylic Low Sheen can be applied.
PART ID DESCRIPTION
561452 EMER-ACRYLIC SEALER 4L
561785 EMER-ACRYLIC SEALER 15L
EMER-COAT CLEAR SEALERPenetrating, solvent based, clear masonry and concrete binder/sealer.
USES
As a primer, sealer coating on fibre cement, masonry, blockwork, brick or other masonry surfaces. Provides an excellent seal over aged, weathered paintwork and will penetrate powdery coatings such as “kalsomine” and “distemper”.
PART ID DESCRIPTION
561018 EMER-COAT CLEAR SEALER 4L
561019 EMER-COAT CLEAR SEALER 20L
EMER-BONDWaterborne, anti-corrosive primer.
USES
For fabrication and maintenance work generally. Suitable as a shop primer due to its quick drying, outstanding adhesion, good resistance to corrosion and the absence of health and fire hazards. For application in special conditions, consult Parchem for detailed information.
PART ID DESCRIPTION
561616 EMER-BOND PRIMER 4L
561790 EMER-BOND PRIMER 15L
EMER-TANTannin phosphate, rust-converter for corroding metal, pre-painting treatment.
USES
The versatility of Emer-Tan application makes it suitable for small or large surfaces, inaccessible areas or wherever rust is present. As a surface pre-treatment for rusted structural steel, machinery, gates, railings, marine fittings, motor vehicle floors and all rusted surfaces where the complete removal of rust is not feasible or economical.
PART ID DESCRIPTION
561610 EMER-TAN 5L
EMER-GARD PRIMER TYPE 2Quick drying anti-corrosive primer .
USES
Emer-Gard Primer Type 2 can be used for all new or old steel surfaces in industrial, commercial or domestic situations. Used where high durability is desired when only a minimum of surface preparation is possible, for practical, safety or reasons of economy.
PART ID DESCRIPTION
561176 EMER-GUARD PRIMER TYPE 2 4L
EMER-ACRYLIC LOW SHEENA High quality, water based acrylic, low sheen coating.
USES
Suitable for application to brickwork, cement render, concrete, blockwork, fibre cement sheeting, plaster board and pre-primed metals. As a general purpose, high opacity, durable protective, decorative coating mainly for exterior use, but also suited for interior surfaces.
PART ID DESCRIPTION
561394 EMER-ACRYLIC LOW SHEEN TINTS 15L
CONSTRUCTION PRODUCTS 27
P R I M E R S / L I Q U I D A P P L I E D M E M B R A N E S
LIQUID APPLIED MEMBRANES
EMER-CLAD WATERPROOFINGAcrylic, flexible waterproofing membrane, for internal and UV exposed external areas - colour range available.
USES
Emer-Clad is suitable for application to many common substrates including concrete, fibrous cement products, metals, timber with priming required on most substrates.
PART ID DESCRIPTION
740040 EMER-CLAD MATT LIGHT GREY 4L
561723 EMER-CLAD MATT LIGHT GREY 15L
561724 EMER-CLAD MATT MID GREY 15L
561720 EMER-CLAD MATT WHITE 15L
561770 EMER-CLAD MATT A BASE 15L
561765 EMER-CLAD MATT B BASE 15L
561760 EMER-CLAD MATT C BASE 15L
740015 EMER-CLAD MATT WHITE 4L
740045 EMER-CLAD MATT MID GREY 4L
561755 EMER-CLAD SATIN A BASE 15L
561750 EMER-CLAD SATIN B BASE 15L
561745 EMER-CLAD SATIN C BASE 15L
740205 EMER-CLAD SATIN WHITE 4L
561700 EMER-CLAD SATIN WHITE 15L
740220 EMER-CLAD SATIN LIGHT GREY 4L
561703 EMER-CLAD SATIN LIGHT GREY 15L
740225 EMER-CLAD SATIN MID GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L
740220 EMER-CLAD SATIN LIGHT GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L
EMER-CLAD FIRECHECKFire retardant protective coating for concrete and masonry surface.
USES
On timber and all types of building boards, ceiling tiles, panelling etc. Over polyurethane and styrene foam insulation, pipe lagging or similar it provides a fire retardant, abrasion resistant, flexible skin that also withstands weather and wear.
PART ID DESCRIPTION
561005 EMER-CLAD FIRECHECK WHITE 15L
EMER-CLAD ARCHITECTURALDecorative and protective façade coating, water based acrylic, highly durable, elastomeric, waterproofing membrane with full colour range.
USES
Emer-Clad is suitable for application to many common substrates including concrete, render, masonry, fibrous cement products, metals, timber and bituminous membranes. Some special priming may be required.
PART ID DESCRIPTION
740040 EMER-CLAD MATT LIGHT GREY 4L
561723 EMER-CLAD MATT LIGHT GREY 15L
561724 EMER-CLAD MATT MID GREY 15L
561720 EMER-CLAD MATT WHITE 15L
561770 EMER-CLAD MATT A BASE 15L
561765 EMER-CLAD MATT B BASE 15L
561760 EMER-CLAD MATT C BASE 15L
561719 EMER-CLAD MATT TINTS 15L
740015 EMER-CLAD MATT WHITE 4L
740045 EMER-CLAD MATT MID GREY 4L
561755 EMER-CLAD SATIN A BASE 15L
561750 EMER-CLAD SATIN B BASE 15L
561745 EMER-CLAD SATIN C BASE 15L
561388 EMER-CLAD SATIN TINTS 15L
740205 EMER-CLAD SATIN WHITE 4L
561700 EMER-CLAD SATIN WHITE 15L
740220 EMER-CLAD SATIN LIGHT GREY 4L
561703 EMER-CLAD SATIN LIGHT GREY 15L
740225 EMER-CLAD SATIN MID GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96828
L I Q U I D A P P L I E D M E M B R A N E S
EMER-PROOF MULTIPURPOSE PRIMER & WP ADDITIVESBR latex primer & waterproofing additive.
USES
Emer-Proof Multipurpose Primer & WP Additive is a single component SBR primer that provides excellent high bonding and penetrating properties into porous concrete and masonry surfaces.Can also be used as a waterproofing additive into cement based compounds for enhanced adhesion and waterproof properties
PART ID DESCRIPTION
743120 EMER-PROOF MULTI PURP PRIMER/WP ADD 15L
743121 EMER-PROOF MULTI PURP PRIMER/WP ADD 4L
EMER-PROOF NON-POROUS PRIMERWater-based solvent free primer for non-porous substrates
USES
Emer-Proof Non-Porous Primer is specifically designed with adhesion enhancing properties over metallic, smooth, dense, and non-porous surfaces. Providing a safe alternative to hazardous solvent based primers and etching products, Emer-Proof Non-Porous Primer enables the adhesion of Emer-Proof membranes and adhesives over non-absorbent surfaces.
PART ID DESCRIPTION
743123 EMER-PROOF NON POROUS PRIMER 4L
743124 EMER-PROOF NON POROUS PRIMER 1L
EMER-PROOF AQUA BARRIERWater borne epoxy membrane / barrier for porous surfaces.
USES
Emer-Proof Aqua Barrier is a grey, two-component, matt to semi-gloss epoxy coating. When applied at 200 microns dry film thickness will provide a tenaciously bonded coating controlling the transmission of liquid moisture.
PART ID DESCRIPTION
405016 EMER-PROOF AQUA-BARRIER GREY 20L KIT PART A
405017 EMER-PROOF AQUA-BARRIER GREY 20L KIT PART B
EMER-PROOF ECOFLEXHigh performance water based rubberised bitumen waterproofing membrane.
USES
Emer-Proof Ecoflex is a flexible, solvent free polymer modified bitumen membrane, designed for a wide range of waterproofing applications over numerous building substrates.
PART ID DESCRIPTION
730730 EMER-PROOF ECOFLEX 20L
EMER-PROOF ECOFLEX ANTI ROOTPolymer modified bitumen liquid membrane with plant root inhibitors.
USES
Emer-Proof Ecoflex Anti-Root is a flexible, solvent free polymer modified bitumen membrane with root inhibiting properties designed for subterranean applications.
PART ID DESCRIPTION
743100 EMER-PROOF ECOFLEX ANTI ROOT 15L
CONSTRUCTION PRODUCTS 29
L I Q U I D A P P L I E D M E M B R A N E S
EMER-PROOF QUICK DRY TWO PARTPolymer / cementitious two part waterproofing membrane.
USES
Emer-Proof Quick Dry Two Part is a water based, fast drying, flexible 2 component, polymer modified cement based waterproofing membrane.
PART ID DESCRIPTION
743110 EMER-PROOF QUICK DRY PT A (LIQ) 20L KIT
743115 EMER-PROOF QUICK DRY PT B (POW) 20L KIT
EMER-PROOF UNDER TILEFibre enhanced single component water based SBR hybrid polyurethane membrane.
USES
Emer-Proof Under Tile is a flexible, fibre reinforced, high bonding, SBR modified elastomeric membrane designed for internal wet areas to be overlaid directly with tiles or toppings.
PART ID DESCRIPTION
743116 EMER-PROOF UNDER TILE 15L
EMER-PROOF TOP COATWater based acrylic hybrid membrane top coat for UV exposed applications.
USES
Emer-Proof Top Coat is a hard wearing membrane designed for external applications on horizontal surfaces. Suitable for use as a trafficable top coat over Emer-Proof Quick Dry Two Part or Emer-Proof EcoSeal for roofs and deck areas. Emer-Proof Top Coat exhibits outstanding adhesion properties and excellent UV weather resistance.
PART ID DESCRIPTION
743118 EMER-PROOF TOP COAT 15L
EMER-PROOF EXTENDED WEAR CLEAR COATSolvent free aliphatic polyurethane clear sealer.
USES
Emer-Proof Extended Wear Clear Coat is a solvent free aliphatic polyurethane sealer designed for use over concrete, masonry and mineral surfaces. Suitable for a variety of exterior applications, exhibiting excellent UV resistance and durability. Compatible over a range of porous finish surfaces such as textured coatings, exposed membrane surfaces and cement based coatings. Offers ideal finish over Emer-Proof Top Coat.
PART ID DESCRIPTION
743119 EMER-PROOF EXTENDED WEAR CLEAR COAT 15L
EMER-PROOF ECOSEALNext generation solvent free polyurethane membrane.
USES
Emer-Proof EcoSeal is a new generation, solvent free one component polyurethane membrane. User and environmentally friendly alternative to solvent based polyurethanes for use in areas exposed to permanently wet conditions. Suitable for internal and external wet areas allowing the direct fix of tiles and toppings without bonding issues commonly associated with solvent based and moisture cured polyurethane products.
PART ID DESCRIPTION
743117 EMER-PROOF ECOSEAL 15L
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96830
S E L F A D H E S I V E M E M B R A N E S
EMER-PROOF EJB TAPESuperior sealing system for critical areas over traditional bondbreaking sealants and tapes.
USES
Emer-Proof EJB Tape has been developed as a superior alternative to traditional bond breaking methods for sealing critical movement zones. Emer-Proof EJB Tape is suitable for internal, external underground and fully immersed applications.
PART ID DESCRIPTION
743265 EMER-PROOF EJB TAPE
743270 EMER-PROOF EJB TAPE INTERNAL CORNERS
743275 EMER-PROOF EJB TAPE EXTERNAL CORNERS
POLYFAB LD 7230W
PART ID DESCRIPTION
771193 POLYFAB LD 7230W 1.27X1M
SONTARA TAPENon woven reinforcement fabric.
USES
Sontara Reinforcement Fabric is a non woven fabric designed for use with liquid membrane and high build coating products for enhancing reinforcement, tensile strength and uniform layers in liquid membrane applications.
PART ID DESCRIPTION
771086 SONTARA TAPE 100MMX100M ROLL
771087 SONTARA TAPE 150MM X 100M ROLL
771088 SONTARA TAPE 200MMX100M ROLL
771089 SONTARA TAPE 300MMX100M ROLL
771090 SONTARA TAPE 1M X 100M ROLL
EMER-PROOF HDPESelf adhesive bituminous membrane incorporating a cross laminated HDPE film that provides the product excellent physical & application properties.
USES
Emer-Proof HDPE is used to waterproof foundations, basements, roofs, retaining walls and tunnels, box culverts and planter boxes.
PART ID DESCRIPTION
742034 1M X 20M ROLL
EMER-PROOF HDSelf adhesive bituminous membrane incorporating a polypropylene mesh for added strength and heat stability.
USES
Emer-Proof HD is used to waterproof bridge decks, ramps, car parks, and road pavements where the membrane will be overlaid with hot asphalt.
PART ID DESCRIPTION
742038 1M X 20M ROLL
TILEBOND FLEXRubber modified, flexible, off-white, cement based, ceramic tile adhesive for use with Emer-Proof 680.
USES
Tilebond Flex can be used both internal / external on walls and floors. It can be used to bond a variety of different tiles to a variety of different substrates. It is fast setting, meaning you can commence grouting 6-8 hours @ 20OC after completion of tiling.
PART ID DESCRIPTION
307001 EMER-PROOF TILEBOND FLEX 20KG
TILE ADHESIVE
EMER-PROOF SELF ADHESIVE PRIMERHigh tack primer for Emer-Proof HDPE/HD and for Index Autotene Base P / Index Autotene Asfaltico.
PART ID DESCRIPTION
742041 EMER-PROOF SELF ADHESIVE PRIMER 20L
LIQUID APPLIED ACCESSORIES
SELF ADHESIVE MEMBRANES
CONSTRUCTION PRODUCTS 31
P R E - A P P L I E D M E M B R A N E S / D R A I N A G E & P R O T E C T I O N
PROOFEX ENGAGEPre-applied waterproofing membrane which mechanically bonds to poured concrete.
USES
Proofex Engage is a unique patented waterproofing membrane for a range of waterproofing applications including basements and substructures. It provides water vapour and gas protection to water excluding structures and protects concrete from aggressive ground salts and chemicals.
PART ID DESCRIPTION
707070 1.27 X 30M ROLL
PROOFEX DETAILS
PART ID DESCRIPTION
707071 PROOFEX DETAIL STRIP 10M
707072 PROOFEX EXT CORNER (200X200X200MM)
707073 PROOFEX INT CORNER (200X200X200MM)
707075 PROOFEX LM 28KG
707077 PROOFEX L SECTION 10M
707078 PROOFEX TOP HAT 110mm
707079 PROOFEX TOP HAT 160mm
707085 FOSROC POLYUREA WCS GUN GRADE
707086 FOSROC POLYUREA WCS - STATIC MIXING NOZZLES
707087 FOSROC POLYUREA WCS - MANUAL GUN
PRE-APPLIED MEMBRANE & ACCESSORIES
IMPRABOARDPolyethylene coreflute board for low duty membrane protection.
PART ID DESCRIPTION
771079 IMPRABOARD 1830 X 1220
EMER-PROOF DRAIN VDimpled protection and drainage membrane in high-density extruded polyethylene with continuous filament yarn.
USES
Emer-Proof Drain V is ideal for the protection of foundations and is perfect for “dry” roof gardens, as it replaces the traditional aggregate draining layer and speeds up the work, making it less expensive and reducing both the weight and thickness of the roof garden.
PART ID DESCRIPTION
743072 EMER-PROOF DRAIN V 2M X 20M ROLL
USES
Consisting of 100% synthetic fibres, mainly polyester, resin free and glue free, Emer-Proof Geotex represents the best solution when building tunnels, waste dumps, water basins, river banks and reinforced soil.
PART ID DESCRIPTION
744000 EMER-PROOF GEOTEX 300 1M WIDE
DRAINAGE & PROTECTION
PLASTICPART ID DESCRIPTION
GD-FILM Black IR2 4m x 50m roll 200Um
GD-FILMO450200 Orange IR3 4m x 50m roll 200Um
GD-FILMO633200 Orange IR3 6m x 33m roll 200Um
Note: 2m wide rolls
EMER-PROOF GEOTEX
Non-woven fabric in needle-punched polyester for the drainage of construction works
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96832
T O R C H A P P L I E D M E M B R A N E S
TORCH APPLIED MEMBRANES
INDEX ROLLBASEPolyester fabric backed base sheet, for heat sensitive substrates, in multi-layer torch-on membrane systems.
USES
Rollbase is particularly suited as a base sheet for heat sensitive substrates in multi-layer torch applied bitumenLose laid, mechanically fastened, fully or part adhered with Adhesive A901 (general purpose contact adhesive), hot asphalt roll & pour method membrane systems.
PART ID DESCRIPTION
742010 1M X 10M ROLL
INDEX VAPORDIFFUSERElastoplastomeric membrane with deep bitumen underside rivets, to allow water vapour to diffuse and provided waterproofing in the base layer in multi-layer systems.
USES
Vapordiffuser is used for both new construction and renovation work, on damp surfaces where blisters can form in the waterproof layer. It can be installed as a visible layer directly on concrete or to renovate an old bituminous layer which is no longer waterproof.
PART ID DESCRIPTION
742030 1M X 7.5M ROLL
INDEX FIDIA3 mm thick elastomeric, torch applied, reinforced with rot-proof non-woven polyester stabilised with glass matt, membrane. Used for single or multi layer systems.
USES
Fidia polyester is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs etc.
PART ID DESCRIPTION
742000 3MM 1M X 10M ROLL
INDEX MODO/P3.5 mm thick, elastoplastomeric, torch-applied, reinforced with polyester and stabilised with fibre glass matt membrane, for single or multi layer systems.
USES
Modo/P has been specifically designed for the waterproofing of foundations, basements, tunnels, terraces and roofs as a single layer or in a multi-layer system.
PART ID DESCRIPTION
742015 3.5MM 1 X 10M ROLL
INDEX FIDIA MINERAL GREYFidia Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane for both new and renovation work.
USES
Fidia Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane for both new and renovation work.
PART ID DESCRIPTION
742004 FIDIA MINERAL GREY 4.5KG
INDEX ARGO P3 mm thick, plastomeric, torch-applied, reinforced with polyester and stabilised with fibre glass matt membrane, for single or multi layer systems.
USES
Argo P is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs, etc, as an economical single layer membrane or as the base layer in multi-layer systems.
PART ID DESCRIPTION
742230 ARGO P 3MM
CONSTRUCTION PRODUCTS 33
T O R C H A P P L I E D M E M B R A N E S
INDEX TESTUDO/TESTUDO MINERAL4 mm thick, elastomeric, torch-applied, reinforced with rot-proof non-woven single strand spunbond polyester fabric, membrane. Used in single or multi layer systems.
USES
Testudo is used as a continuous waterproofing membrane for foundations, basements, tunnels, roofs etc. Testudo Mineral may be used as the top layer in a two layer membrane system or as a single roof membrane.
PART ID DESCRIPTION
742040 4MM 1M X 10M ROLL
742060 MINERAL GREY 4.5KG 1M X 10M ROLL
INDEX MINERAL DESIGN 10P - CHECKER BOARD Waterproof membrane, self protected with ceramic granules in a “checker board” design. Gives the impression of a tiled / paved area. For the decoration and development of the “Design” roof. Mineral Design is a waterproofing membrane which combines, with its high water tightness performance, a decorative effect better than that by ordinary self-protected membranes. This adds value to the waterproofing work and solves environmental impact problems.
PART ID DESCRIPTION
771210 INDEX MINERAL DESIGN 10P - CHECKER BOARD 4.5KG
INDEX TESTUDO 30Torch applied 5 mm thick high performance reinforced elastoplastomeric polymer waterproofing membrane designed to be installed under hot asphalt.
USES
Testudo 30 membrane is characterised by a high resistance to puncture and is therefore particularly suitable for single layer waterproofing systems where high mechanical resistance is required.
PART ID DESCRIPTION
742046 5MM 1 X 10M ROLL
INDEX AUTOTENE ASFALTICOAutotene Asfaltico EP is a membrane which bonds with the heat of the bitumen paving laid over it. Its adhesion continues through use and is reinforced by the action of the traffic and solar action.
USES
Autotene Asfaltico EP is used for cold-state waterproofing of bridge and car park surfaces to be paved with hot bitumen or asphalt.
PART ID DESCRIPTION
771220 INDEX AUTOTENE ASFALTICO EP 4MM
INDEX AUTOTENE BASE PThermally self adhesive 3 mm thick waterproofing base sheet membrane.
USES
A waterproofing membrane which consists of distilled bitumen for industrial use, with a high content of elastomeric and plastomeric polymers.
PART ID DESCRIPTION
742011 BASE SELF ADH. WATERPROOFING
INDEX PROTEADUO SBS/APPHigh performance 4 mm thick torch applied waterproofing membrane with multilayer composite polymer bitumen and reinforcement
USES
Proteaduo/P has been developed as a waterproofing membrane where high mechanical resistance, elasticity, thermal stability and durability is required.
PART ID DESCRIPTION
742012 PROTEA DUO P COMPOSITE WATERPROOFING
INDEX DEFEND H ANTI-ROOT4 mm thick, elastomeric, torch-applied, plant root repellent, reinforced with rot-proof single strand spunbound non-woven polyester fabric, membrane.
USES
Defend H is always applied as the last waterproofing layer in contact with the earth for gardens, foundations, underground garages and tunnels covered with soil, road structures and roofs under gravel etc.
PART ID DESCRIPTION
771184 4MM 1M X10M ROLL
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96834
T O R C H A P P L I E D A C C E S S O R I E S
TORCH APPLIED ACCESSORIES
PRESSURE SEAL FLASHINGAluminium strips for sealing and flashing the edge of index sheet membranes.
USES
Parchem Pressure Seal Flashing is used to seal and flash the edge of Index membranes.
PART ID DESCRIPTION
752016 PRESSURE SEAL FLASHING 3M LENGTHS
HELASTO-RINGPlastic support ring for concrete pavers with leveling adjustment.
PART ID DESCRIPTION
771197 HELASTORING
771198 HELASTORING LEVELLER
TORCH ON PIPE DETAILING COLLAR Pipe Sealing - Torch on Pipe Detailing Collar in TPE (Thermoplastic Elastomer’s)
PART ID DESCRIPTION
744010 TORCH ON DETAILING COLLAR 15-130MM
TORCH ON DOMED GRATE 60 - 120mmTorch on leaf guard for drainage outlets (flexible)
PART ID DESCRIPTION
744090 TORCH ON DOMED GRATE 60-140MM
ONE WAY VENTSThe One Way Vent is a moisture relief device consisting of a two-piece polyethylene vent that allows moisture vapour to escape out of the roof deck system without allowing moisture to enter through the vent.
USES
One Way Vents are most commonly used in re-roofing applications. Blisters caused by internal moisture in “old” roofing systems may be prevented or reduced by using One Way Vents.One Way Vents allow for continual release of vapour from within the system, while maintaining the watertight integrity from the outside.
PART ID DESCRIPTION
744030 TORCH ON ONE WAY VENT 60MM
771183 TWO PIECE ONE WAY VENTS
GAS TORCHES & ACCESSORIESFor use with torch on membranes.
PART ID DESCRIPTION
742082 SMALL GAS TORCH, INCLUDING HOSE AND REGULATOR
742092 LARGE GAS TORCH, INCLUDING HOSE AND REGULATOR
771196 GAS TORCH HEAD LARGE
771195 GAS TORCH HEAD SMALL
771207 GAS TORCH STEM LONG 480MM
771206 GAS TORCH STEM SHORT 220MM
INTERNAL/EXTERNAL BITUMINOUS CORNERThe bituminous prefabricated corners are made by hot folding of a unique piece of bituminous membrane with composite reinforcement. The main advantage is the total melting to the waterproofing sheet allowing flexibility during installation, which will give a total waterproofing guarantee on the most risky points.
PART ID DESCRIPTION
744060 EXTERNAL BITUMINOUS CORNER
744040 INTERNAL BITUMINOUS CORNER
TORCH ON BITUMINOUS FILLET (BOND BREAKER)Like with the bituminous corner profiles, the torch on bituminous fillet (bond breaker) is obtained via the hot bending of a bituminous membrane with composite reinforcement. It has a length of 1100mm.
PART ID DESCRIPTION
744050 TORCH ON BITUMINOUS FILLET
ROOF DRAIN (DROPPER)Made of TPE (Thermoplastic Elastomer’s) with a 170mm spigotManufactured of a special compound of thermoplastic rubber, it is highly resistant against low temperatures (‘cold flexibility down to -40°) as well as perfectly compatible with all sorts of bituminous waterproofing membrane. The traditional dove-tail channels and special shagreens on the flange allow a perfect bond to the membrane making the seal 100% effective.
PART ID DESCRIPTION
744080 ROOF DRAIN 80MM
744070 ROOF DRAIN 100MM
PARAPETE DRAIN OUTLET - BOY TYPETPE (Thermoplastic Elastomer’s) angular drain - (Spitter) 100mm x 65mm x 90’ angle)
PART ID DESCRIPTION
744020 PARAPETE DRAIN OUTLET - BOY TYPE
CONSTRUCTION PRODUCTS 35
T O R C H A P P L I E D A C C E S S O R I E S / C E M E N T I T I O U S M E M B R A N E S
INDEX BITUMEN PRIMERBitumen primer for all torch applied Index membranes.
PART ID DESCRIPTION
742105 INDEX BITUMEN PRIMER 20L
HDPE ROLLER970mm long pipe for rolling membranes out
PART ID DESCRIPTION
771200 HDPE ROLLER
CEMENTITIOUS MEMBRANESVANDEX BB75-ZSurface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex BB75-Z is a cementitious membrane and does not rely on crystal growth to achieve its waterproofing. As a result, BB75-Z can be used on most masonry surfaces, including sandstone, provided that the surfaces are adequately prepared.
PART ID DESCRIPTION
751005 VANDEX BB75-Z 25KG
VANDEX BB75E-ZHigh performance, crack accommodating, surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex BB75E-Z is ideal in applications where the high pressure face is not easily accessible. It is also ideal for waterproofing the inside face of swimming pools, sewerage processing tanks, concrete block walls and any masonry surface where crystal growth waterproofing will not be effective due to a lack of alkalinity in the substrate.
PART ID DESCRIPTION
751003 VANDEX ELASTICIZER PK75 10KG PAK
VANDEX CONCRETE GREYConcrete capillary penetrating, crystal growth sealing, cement based, waterproofing system for positive and negative water pressure applications.
USES
Vandex Concrete Grey can be applied to either the pressure or non-pressure faces of concrete and is excellent for solving the problem of water seepage through porous or cracked concrete in both new and old structures.
PART ID DESCRIPTION
751011 VANDEX CONCRETE GREY 25KG
VANDEX CEMELASTFlexible, surface applied, cement based render, waterproofing barrier for positive and negative water pressure applications.
USES
Vandex Cemelast is excellent for solving the problem of water seepage through concrete and masonry where live cracks are present in both new and old structures.
PART ID DESCRIPTION
751009 VANDEX CEMELAST 9KG
VANDEX PLUGRapid setting, permanent plugging of water seepage through porous concrete and fast flowing water through cracks and construction joints in concrete and masonry.
USES
Applications include plugging in-situ and precast concrete segments in tunnels, water storage tanks, sewerage mains and processing tanks, basements, below ground car parks, access chambers, building foundations and mines.
PART ID DESCRIPTION
751006 VANDEX PLUG 15KG
VANDEX UNI-MORTAR 1-ZCement based reprofiling and waterproofing repair mortar - 6mm to 12mm thickness.
USES
Vandex Uni Mortar 1-Z is a surface applied, waterproof cementitious mortar for reprofiling concrete and masonry which does not rely on crystal growth to achieve its waterproofing. As a result, Vandex Uni Mortar 1-Z can be used on most masonry surfaces, including sandstone, provided that the surfaces are adequately prepared.
PART ID DESCRIPTION
751008 VANDEX UNI MORTAR 1-Z 25KG
VANDEX CONSTRUCTION JOINT TAPEWaterproof joint bandage for moving joints. Used with Vandex BB75E-Z or Cemelast.
PART ID DESCRIPTION
751010 VANDEX CONSTRUCTION JOINT TAPE
INDEX MINERAL CHIPS
PART ID DESCRIPTION
771201 INDEX MINERAL CHIPS GREY 5KG
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96836
CONCRETE REPAIR & PROTECTION
CONSTRUCTION PRODUCTS 37
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96838
C O N C R E T E R E P A I R P R O D U C T S
AEGIS MSPCementitious floor topping internal/external trafficable waterproofing surface (2-4 mm thickness)
USES
Aegis MSP is particularly useful to resurface rain damaged concrete pavements or substrates which require a cementitious waterproof finish.
PART ID DESCRIPTION
752003 AEGIS MSP COARSE GREY 20KG PAK
752001 AEGIS MSP FINE GREY 20KG PAK
PATCHROC GPFloor / pavement patch repair, fast set mortar (15-75 mm depth)
USES
For the emergency reinstatement of localised patches in concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors.
PART ID DESCRIPTION
402070 PATCHROC GP 20kg bag
PAVEROCFloor / pavement large area, repair mortar (15-50 mm depth)
USES
For the reinstatement of large areas of concrete pavements and floors to avoid the total replacement of bays.
PART ID DESCRIPTION
402080 PAVEROC 20kg bag
RENDEROC HBGeneral purpose, economical, patch repair mortar.
USES
For the reinstatement of large areas of concrete and for small, localised patch repairs. Renderoc HB will protect embedded steel reinforcement. It is specifically designed for vertical and overhead high-build applications.
PART ID DESCRIPTION
306095 RENDEROC HB 15kg
RENDEROC HB40High performance, medium weight, very low shrinkage, patch repair mortar, compatible with concrete 30-45 MPa
USES
For the reinstatement of large areas of reinforced concrete where low permeability characteristics are required and where higher compressive strength is an important consideration.
PART ID DESCRIPTION
302020 RENDEROC HB40 20kg
RENDEROC HB70High build, high strength, very low shrinkage, patch repair mortar, compatible with concrete >45 MPa
USES
For the reinstatement of localised patch repairs and largerareas where suitable reinforcement is incorporated. Renderoc HB70 is alkaline in nature and will protect embedded steel reinforcement.
PART ID DESCRIPTION
303030 RENDEROC HB70 20kg
PATCHROC C Floor / pavement patch repair, fast set mortar (25-200 mm depth).
USES:
For the emergency reinstatement of localised deep patches in concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors.
PART ID DESCRIPTION
402060 PATCHROC C 20kg
RENDEROC HB25High performance, light-weight, very low shrinkage, patch repair mortar, compatible with concrete 15-30 MPa
USES
For the reinstatement of large areas of reinforced concrete where low permeability characteristics are required and where maximum compatibility with a compressive strength in the range of 15-30MPa
PART ID DESCRIPTION
387080 RENDEROC HB25 15KG
CONCRETE FLOOR REPAIRS REPAIR MORTARS FOR VERTICAL & OVERHEAD APPLICATIONS
CONSTRUCTION PRODUCTS 39
C O N C R E T E R E P A I R P R O D U C T S
RENDEROC LA55Super fluid, high strength, low alkali, micro-concrete reinstatement mortar, for form and pour applications
USES
Ideal for reinstatement of large, structural sections of concrete as well as for many smaller locations where difficulties of access make hand or trowel-applied mortars impractical.
PART ID DESCRIPTION
302030 RENDEROC LA55 20KG
RENDEROC FCFairing mortar screed, to cover surface imperfections, polymer modified - v(0 mm to 3 mm thickness)
USES
Renderoc FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar.
PART ID DESCRIPTION
302000 RENDEROC FC 15KG
RENDEROC RAPIDExtremely fast setting, reinstatement mortar, trafficable within 2 hours.
USES
For fast reinstatement of bridge joint edges, roadway slabs, or where placement of localised areas is required. Renderoc Rapid is designed to accept traffic 1 - 2 hours after placement, enabling fast repairs and concrete replacements to take place, whilst minimising any traffic interruptions.
PART ID DESCRIPTION
200200 RENDEROC RAPID 20KG
RENDEROC BBHigh strength, low shrinkage mortar for the installation of elastomeric bridge bearings
USES
Renderoc BB exhibits a series of performance characteristics which make it ideal for use as a bearing mortar for the installation of elastomeric bridge bearings.
PART ID DESCRIPTION
200250 RENDEROC BB 20KG
GUNCRETE EHigh strength, low shrinkage, high build spray applied repair mortar
USES
For the reinstatement of large areas of concrete and for small, localised patch repairs in areas such as sea walls bridge decks and piers, tunnels, sewer pipes, etc.
PART ID DESCRIPTION
302060 GUNCRETE E 20KG
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96840
C O N C R E T E R E P A I R P R O D U C T S
NITOMORTAR BHHigh performance epoxy resin blow hole and repair fairing mortar
USES
For filling in blow-holes, and eliminating minor irregularities in new and old concrete, prior to the application of Nitomortar and Nitocote epoxy systems.
PART ID DESCRIPTION
342270 NITOMORTAR BH BASE 5L
342280 NITOMORTAR BH HARDENER 2.5L
342290 NITOMORTAR BH FILLERS 5KG
NITOMORTAR APMulti purpose, epoxy adhesive repair paste, also used as an adhesive for Nitofill LV, and Emer-Band bandage systems
USES
For speedy and permanent patching repairs to concrete structures; bonding of precast concrete components and repair work to cementitious substrates where strength, impermeability to water, and resistance to aggressive chemicals is essential; emergency repairs to concrete structures and industrial floors in chemical handling and process areas.
PART ID DESCRIPTION
620460 NITOMORTAR AP 3LT PAK
620463 NITOMORTAR AP BASE 15L PAK
620464 NITOMORTAR AP HARDENER 15L PAK
NITOMORTAR 903Solvent free, general purpose, epoxy binder system
USES
For combining with selected fillers and aggregates to produce epoxy mortars of various consistencies. Also used as supplied, or with selected filler additions to produce bolt or starter-bar grouts, and as a priming system with some Durafloor epoxy flooring products.
PART ID DESCRIPTION
481015 NITOMORTAR 903 1.5L PAK
481025 NITOMORTAR 903 6L PAK
481019 NITOMORTAR 903 BASE 20L
481018 NITOMORTAR 903 HARDENER 10L
NITOMORTAR 908General purpose, high strength, epoxy patch repair mortar
USES
For speedy and permanent repairs to spalled concrete structures; bedding in of precast concrete beams; and all repair work to concrete and cementitious substrates where strength, impermeability to water, and resistance to aggressive chemicals is essential. Emergency repairs to concrete structures and industrial floors in chemical handling and process areas.
PART ID DESCRIPTION
340000 NITOMORTAR 908 BASE 20L PAK
340001 NITOMORTAR 908 HARDENER 20L PAK
340005 NITOMORTAR 908 10L PAK
EPOXY REPAIR PRODUCTS
NITOMORTAR ELTrowel-applied, high strength, high chemical and abrasion resistant epoxy liner system (3 mm to 12 mm thickness)
USES
For improving and bonding concrete repair mortars, cementitious floor toppings and screeds, waterproof renders and cementitious slurries. Cementitious mortars are alkaline in nature and will protect embedded steel reinforcement. Mortars produced with Nitobond SBR may be used for horizontal, vertical and overhead repair work.
PART ID DESCRIPTION
342095 NITOMORTAR EL 6L PAK
334411 NITOMORTAR EL BASE 15L PACK
334422 NITOMORTAR EL HARDENER 15L PAK
334433 NITOMORTAR EL FILLER 15L PAK
NITOMORTAR EL-HBHand-applied, trowel finished, high build, chemical and abrasion resistant epoxy repair mortar system (5 mm to 50 mm thickness)
USES
A high build epoxy mortar with maximum chemical and abrasion resistance for the protection of concrete and similar substrates. Ideal for rehabilitation of manholes, lining of outfalls, sewers and concrete structures.
PART ID DESCRIPTION
342250 NITOMORTAR EL-HB BASE 9L PAK
342255 NITOMORTAR EL-HB HARDENER 9L PAK
342260 NITOMORTAR EL-HB FILLERS 9L PAK
CONSTRUCTION PRODUCTS 41
C O N C R E T E R E P A I R P R O D U C T S
NITOMORTAR F4 FILLERSChemically inert fillers for use with Nitomotar 903 epoxy resin binder system.
PART ID DESCRIPTION
412060 NITOMORTAR F4 FILLERS 20KG
NITOCOTE EP500Spray-applied, trowel finished, high build, chemical and abrasion resistant epoxy liner system (5 mm to 20 mm thickness)
USES
A sprayable epoxy mortar with maximum chemical and abrasion resistance for the protection of concrete and similar substrates. Nitocote EP500 is simple and cost effective for overhead, vertical and horizontal resurfacing lining to both dry and damp (SSD) surfaces.
PART ID DESCRIPTION
336600 NITOCOTE EP500 GREY BASE 16L PACK
336610 NITOCOTE EP500 GREY HARDENER 16L PACK
NITOFILL LVLow viscosity, dual cartridge, epoxy crack-injection system
USES
Nitofill LV is designed for injecting cracks in concrete and masonry where there is a need to consolidate a structure or exclude water and air from contact with the reinforcement.
PART ID DESCRIPTION
344220 NITOFILL LV 450ML PAK
344221 NITOFILL/LOKFIX CARTRIDGE GUN
344222 NITOFILL LV FLANGE
344223 NITOFILL LV ADAPTOR
344224 NITOFILL LV STATIC MIXER/HOSE
344225 NITOFILL FLANGE TOOL
344215 NITOFILL LV 1.5L PACK
344214 NITOFILL LV 15L BASE PACK
344216 NITOFILL LV HARDENER 15L PACK
NITOPRIME ZINCRICHZinc-rich epoxy resin primer to protect steel reinforcement within repair mortars
USES
Nitoprime Zincrich is the recommended anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair mortars.
PART ID DESCRIPTION
322100 NITOPRIME ZINCRICH 1L
NITOBOND SBRWater resistant polymer additive, to provide good adhesion to concrete
USES
For improving and bonding concrete repair mortars, cementitious floor toppings and screeds, waterproof renders and cementitious slurries. Cementitious mortars are alkaline in nature and will protect embedded steel reinforcement. Mortars produced with Nitobond SBR may be used for horizontal, vertical and overhead repair work.
PART ID DESCRIPTION
323105 NITOBOND SBR 20L
323115 NITOBOND SBR 200L
NITOBOND HARPolymer emulsion bonding agent
USES
Nitobond HAR is the recommend primer for the Renderoc cement based repair mortars.
PART ID DESCRIPTION
320015 NITOBOND AR 5L
320005 NITOBOND AR 20L
322070 NITOBOND HAR 1L
322080 NITOBOND HAR 5L
322065 NITOBOND HAR 20L
NITOBOND EPEpoxy resin primer, high strength bonding agent to bond concrete substrate to repair mortars
USES
For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal or vertical surfaces where mortar or concrete can be supported by formwork.
PART ID DESCRIPTION
321020 NITOBOND EP 1.5L PAK
321030 NITOBOND EP 6L PAK
PRIMERS FOR REPAIR PRODUCTS
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96842
P R O T E C T I V E C O A T I N G S
DEKGUARD SHigh performance, pigmented aliphatic acrylic, chloride ion and carbonation protective and decorative coating for concrete and masonry
USES
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water.
PART ID DESCRIPTION
560620 DEKGUARD S SPECIAL COLOUR 20L
560622 DEKGUARD S IN-CAN TINT 20L
561570 DEKGUARD S WHITE 20L
PROTECTIVE COATINGS
DEKGUARD E 2000Elastomeric, pigmented acrylic, chloride ion and carbonation protective and decorative coating for concrete and masonry
USES
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there are cracks within the substrate.
PART ID DESCRIPTION
560625 DEKGUARD E 2000 WHITE 15L
560626 DEKGUARD E 2000 SPECIAL COLOUR 15L
560628 DEKGUARD E 2000 IN-CAN TINT 15L
EMER-STOP S100NDeeply impregnating, iso-butyltriethoxy silane, clear liquid, water repellant and chloride ion protective treatment for concrete
USES
A deeply penetrating treatment designed to protect concrete from both water and chloride ingress whilst still permitting water vapour transmission out of the structure. Emer-Stop S100N is especially suitable for protecting concrete structures in marine and coastal environments.
PART ID DESCRIPTION
555147 EMER-STOP S100N 200L (177KG)
555148 EMER-STOP S100N 20L
DEKGUARD PRIMERA reactive silane-siloxane penetrating treatment on concrete surfaces for use with Dekguard S, Dekguard O and Dekguard Clear applications.
PART ID DESCRIPTION
561520 DEKGUARD PRIMER 20L
SILANE TREATMENTS
DEKGUARD OHigh performance, aliphatic acrylic, translucent protective coating for concrete and masonry
USES
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to hide concrete repaired areas, and other visual differences with the host concrete.
PART ID DESCRIPTION
560700 DEKGUARD O 20L
NITOPRIME DGA reactive silane-siloxane primer with an acrylic component for use on porous substrates with a Dekguard topcoat system, for use with Dekguard E2000 and Dekguard Elastic applications.
PART ID DESCRIPTION
562600 NITOPRIME DG 20L
DEKGUARD ELASTICCrack-accomodating elastomeric, pigmented acrylic, chloride ion and carbonation protective coating for concrete and masonry
USES
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there are cracks within the substrate.
PART ID DESCRIPTION
560600 DEKGUARD ELASTIC WHITE 15 L
560621 DEKGUARD ELASTIC SPECIAL COLOUR 15L
560633 DEKGUARD ELASTIC IN-CAN TINT 15L
CONSTRUCTION PRODUCTS 43
C O R R O S I O N P R O T E C T I O N
NITOCOTE SN502Penetrating silane-siloxane treatment to protect concrete and masonry against water and chloride ion penetration.
PART ID DESCRIPTION
555145 NITOCOTE SN502 20L
EMER-STOP CREMEDeeply impregnating, water dispersed, thixotropic creme, waterrepellant and chloride ion protective clear treatment for concrete
USES
A penetrating, thixotropic cream designed to protect concrete and masonry from both water and chloride ingress. Emer-Stop Creme is particularly useful for impregnating the exposed surfaces of reinforced concrete used in bridges, wharves, roads, on all atmospherically exposed concrete buildings and structures.
PART ID DESCRIPTION
555170 EMER-STOP CREME 200L
555180 EMER-STOP CREME 30L (25KG PACK)
NITOCOTE EP405Solvent free, epoxy resin coating system for potable water retaining structures on concrete and steel
USES
For lining and waterproofing potable water retaining structures and surfaces subject to contact with potable water. The cured film is corrosion, chemical and abrasion resistant and is suitable for application to reservoirs, tanks, silos, water treatment works, breweries, dairies, meat and food processing plants. The cured film is non toxic and meets the requirements of AS 4020.
PART ID DESCRIPTION
500010 NITOCOTE EP405 WHITE BASE 8L PAK
500015 NITOCOTE EP405 WHITE/BLUE HDNR 8L PAK
500020 NITOCOTE EP405 BLUE BASE 8L PAK
NITOCOTE EP410Highly chemical resistant, solvent free, epoxy coating system, for concrete and steel applications
USES
To provide protection to concrete and steel structures in aggressive chemical exposure or immersion conditions. The material is particularly suitable for applications in process plants and sewage works.
PART ID DESCRIPTION
500000 NITOCOTE EP410 GREY BASE 8L PAK
500005 NITOCOTE EP410 HARDENER 8L PAK
553050 NITOCOTE EP410 WHITE BASE 8L PAK
GALVASHIELD CC RANGEEmbedded galvanic sacrificial anode grid system for corrosion control and protection in, as yet, undamaged concrete
Various sizes available - please contact your local Parchem office for further information.
PART ID DESCRIPTION
312030 GALVASHIELD CC45
312031 GALVASHIELD CC65
312029 GALVASHIELD CC100
312033 GALVASHIELD CC135
GALVASHIELD XPTEmbedded sacrificial zinc anode used with Renderoc repairs to extend the life of patch repairs in chloride contaminated concrete
PART ID DESCRIPTION
312015 GALVASHIELD XPT
GALVASHIELD XP2Next generation of Galvashield XP provides 2 times the performance of XP
PART ID DESCRIPTION
312040 GALVASHIELD XP2
GALVASHIELD XP4Next generation of Galvashield XP provides 4 times the performance of XP
PART ID DESCRIPTION
312025 GALVASHIELD XP4
CORROSION PROTECTION
EPOXY COATINGS
ZEMDRAIN MD SELF-ADHESIVEControlled permeability formwork liner for high quality durable concrete surfaces.
Zemdrain® MD self-adhesive can be used with all formwork but is particularly suited for special applications.
Zemdrain® MD self-adhesive is an addition to the range of Zemdrain® controlled permeability formwork liners which includes Zemdrain® MD.
PART ID DESCRIPTION
177350 ZEMDRAIN MD (2.5M X 35M) SELF ADHESIVE
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96844
GROUTS & ANCHORS
CONSTRUCTION PRODUCTS 45
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96846
G R O U T S
CONBEXTRA HSUltra high strength, flowable, dual shrinkage compensated precision grout - (gaps 10 mm to 125 mm thickness)
USES
Used for free flow precision grouting in a wide range of applications. These include heavy duty support beneath machine base plates and bridge bearings.
PART ID DESCRIPTION
202000 CONBEXTRA HS 20KG
CONBEXTRA UWFormulated anti-wash out specialist grout for underwater grouting applications
USES
Conbextra UW is used for free flow or pumped grouting applications underwater or in tidal zones. There will be no significant ‘wash-out’ of the cement phase.Applications include bridge columns, quay pillars, concrete piling, slipways and dams.
PART ID DESCRIPTION
201030 CONBEXTRA UW 20KG
CONBEXTRA HFHigh fluid flow, dual shrinkage compensated, precision grout - (gaps 10 mm to 125 mm thickness)
USES
Conbextra HF is a Class A and C grout used for free flow precision grouting in a wide range of applications. These critical uses include heavy duty support beneath machine base plates and bridge bearings.
PART ID DESCRIPTION
201050 CONBEXTRA HF 20KG
CONBEXTRA HESHigh early strength, rapid setting, flowable, cementitious precision grout - (gaps 15 mm to 150 mm thickness)
USES
Conbextra HES is a Class C grout used for free flow grouting in a wide range of applications where rapid strength gain is a pre-requisite.
PART ID DESCRIPTION
201060 CONBEXTRA HES 20KG
CONBEXTRA GPGeneral purpose, high flow, shrinkage compensated grout - (gaps 10 mm to 100 mm thickness)
USES
Conbextra GP is used for general purpose grouting where it is essential to eliminate shrinkage when completely filling voids or grouting between a base plate and substrate, e.g. grouting of a stanchion base plate.
PART ID DESCRIPTION
201020 CONBEXTRA GP 20KG
CONBEXTRA CGeneral purpose, flowable, dual shrinkage compensated cementitious grout - (gaps 10 mm to 100 mm thickness)
USES
Conbextra C is a Class A and C, dual shrinkage compensated, cement based grout used for general purpose grouting where it is essential to eliminate shrinkage when completely filling the void between a base plate and a substrate.
PART ID DESCRIPTION
201040 CONBEXTRA C 20KG
CONSTRUCTION GROUTEconomical, class A shrinkage compensated grout
USES
Construction Grout is used for general purpose grouting when completely filling concrete voids or grouting between a base plate and a substrate e.g. the grouting of a stanchion base plate.
PART ID DESCRIPTION
201000 CONSTRUCTION GROUT 20kg bags
CEMENT BASED GROUTS
CONSTRUCTION PRODUCTS 47
G R O U T S
CONBEXTRA EP10A highly fluid epoxy grout for dynamic/repetitive load applications gap width between 0.25-10mm
PART ID DESCRIPTION
223115 CONBEXTRA EP10 300ML PAK
CONBEXTRA EP65 PLUSA high performance epoxy grout for dynamic/repetitive load applications
PART ID DESCRIPTION
224460 CONBEXTRA EP65 PLUS BASE 14L PAK
224470 CONBEXTRA EP65 PLUS HARDENE 14L PAK
CONBEXTRA EP120A high performance two part epoxy grout for dynamic/repetitive load applications suitable for large volume pours
PART ID DESCRIPTION
222333 CONBEXTRA EP120 BASE 14L PACK
222444 CONBEXTRA EP120 HARDENER 14L PACK
EPOXY GROUTS
CONBEXTRA GROUT AGGREGATESized aggregates 1mm-5mm for bulking out large grout applications and some bulk cementitious flooring pours.
PART ID DESCRIPTION
202021 CONBEXTRA GROUT AGGREGATE 20KG
CONBEXTRA DEEP POURFlowable, precision cementitious grout for high volume and deep pours - (gaps 20 mm to 500 mm thickness)
USES
Conbextra Deep Pour is a Class A and C free flow precision grout for grouting gap applications ranging from 125 mm up to a maximum of 500 mm deep. Conbextra Deep Pour is formulated to minimise segregation and bleeding for deep grout pours.
PART ID DESCRIPTION
201070 CONBEXTRA DEEP POUR 20KG
ALOFIX MC HELPERDispersing agent for Alofix MC powder
PART ID DESCRIPTION
209095 ALOFIX MC HELPER 20L
ALOFIX MCMicrofine, cementitious soil stabilisation grout
PART ID DESCRIPTION
209090 ALOFIX MC 20KG
PARCHEM CONSTRUCTION SUPPLIES PTY LTD ABN 80 069 961 96848
C H E M I C A L A N C H O R S
KEMFASTPolyester - For light to medium duty applications in hollow brick and blockwork
PART ID DESCRIPTION
PW-KF2 KEMFAST 380ml CARTRIDGE
PW-KF2.CASE KEMFAST PROFESSIONAL KIT 380ml
AC100 PROStyrene Free Vinylester - For remedial work in solid and hollow masonary
PART ID DESCRIPTION
PW-AC100PRO AC100 PRO 385ml
PW-AC100PRO-585 AC100 PRO 585ml CARTRIDGE
PFPRO / PURE 150 PROPure Epoxy - for high load applications.
PART ID DESCRIPTION
PW-PFPPRO PFPRO 385ml CARTRIDGE
PW-PFPRO-585 PFPRO 585ml CARTRIDGE
NOZZLES ADHESIVE
PART ID DESCRIPTION
PW-8482 NOZZLES ADHESIVE
BLOW PUMP
PART ID DESCRIPTION
PW-BLOWPUMP BLOW PUMP
4-IN-1 MULTI PRO DELIVERY SYSTEM
PART ID DESCRIPTION
PW-CGPRO 4-IN-1 MULTI PRO DELIVERY SYSTEM
CARTRIDGE GUN 4 IN 1 INJECTION TOOL
PART ID DESCRIPTION
PW-CGPRO-4 CARTRIDGE GUN 4 In 1 INJECTION TOOL
CHEMICAL ANCHORS
AC100EStyrene Free Polyester - For medium duty applications using standard applicator gun
PART ID DESCRIPTION
PW-AC-100E AC100E STYRENE FREE INJECT 300ml
PW-AC-100E.CASE AC100E PROFESSIONAL KIT 300ml
CONSTRUCTION PRODUCTS 49
G R O U T S
The range of products will vary by location so please contact your nearest store for the range of products in stock. 1014
For any product or technical advice call your local Trade Store on
1300 737 787For Trade Store locations visit
www.parchem.com.au
National Head Office: 7 Lucca Road, Wyong NSW 2259 02 4350 5000 www.parchem.com.au