Consulting and Equipping 2004

QUALITY FOR LIFE

a

Otto Bock Health Care offers a

comprehensive line of high-quality

equipment for your lab. Whether you

are upgrading or replacing existing

equipment, expanding your lab, or

moving to a new location, turn to us

for the equipment and space-planning

expertise you can tap into to make

sure your back room. keeps up with the

pace you set in front. Fro/1'l ovens to

routers to drill presses, you get peace

of niind knowing that the largest

Orthotic and Prosthetic manufacturer

in the world is backing you up.

Exceptional Groundwork

As you are making

your equipment

choices, tap into

Otto Bock's

consulting service.

You can take advantage of

our expetience creating more

than 1,300 lab plans on 6 continents.

We help you create an efficient layout,

taking into account work flow, technical

and clinical considerations, your

employment and growth needs, and all the other

details that create the best, most productive work

environment available.

Cover all the Details

To give you the best in a healthy and productive

work environment, we work with you to assess and

define your lab needs and deliver the ideal lab

layout. The output takes into account:

• Making sure your staff has the space they need

• Tailoring work stations for each step

of fabrication

•Eliminating exh·a steps and waste

• Complying with regulations for

safety and health

• Ensuring a comfortable environment

for your patients and staff

Once the formal

information gathering process is

complete, regulations researched, and

contractors contacted, the plan comes

together. You then review an initial layout plan

with the Otto Bock consultant to further refine the

details. The final output includes professionally

produced blueprints and 3-dimensional drawings

that will help you in creating your dream lab. As

you complete your building project, our consultant

will be on hand to answer questions and do the

worrying for you.

\

I

CD CV ® 0 --- ----

Bottom line, we help you protect the investment you

are making in equipment and staff to support the

success of your clinic, even helping you plan for

futme growth.

And, best of all, you don't have to stay up nights

worrying - we do it for you!

Peace of Mind

The next step is simple. Whether you are replacing a key piece of equipment, reworking your lab, or

moving into brand new space, browse this brochure

for highlights of our equipment line. Then, call our

Equipment Specialist for a quote at 800.328.4058 to

start the consulting process, customized just for you.

CONSULTING

Areas of Equipping

OVENS 3

ROUTERS 7

BAND SAWS 9

BELT SANDERS 11

DRILL PRESSES 12

DUST COLLECTION 15

VACUUM PUMPS 17

MISCELLANEOUS EQUIPMENT 19

ACCESSORIES 21

RETURNS & WARRANTIES 24

II

D

701E9=3USA-SP Oven with Windows For the proper heating of sheets of plastic. Also suitable for vacuum forming using vacuum inserts as well as for drying plaster models and for sintering techniques. With two doors, stainless steel interior, with fans for forced air circulation. Temperature selector Class 2, timer 0-24 hours, with microprocessor three-term action regulator with LED-display, electronic wear-free element, ventilation adjuster and 0 5 cm exl1aust connections, two chrome oven racks. Has interior light.

Electrical equipment

2 m power cord with grounded plug

Technical Data

Exterior dimensions Interior dimensions Window dimensions Interior volume Temperature range Power Oven weight/Shipping weight Exterior Color

I 03.4 W x 82.2 H x 85 D cm 80 x 60 x 50 cm 24 x 31 cm 240 I up to 300 °C 208 V, 60 Hz, single phase 98/140 kg light gray, powder-coated

701 E7=3USA-SP Oven with Windows For the proper heating of thermoplastic sheets. Also suitable for vacuum forming using vacuum inserts as well as for drying plaster models and for sintering techniques. With two doors, stainless steel interior, with fans for forced air circulation. Temperature selector Class 2, timer 0-24 hours, with microprocessor three-term action regulator with LE D -display, electronic wear-free element, ventilation adjuster and 0 5 cm exhaust connections, two chrome oven racks. Has interior light.

Electrical equipment

2 111 power cord

Technical Data

Exterior dimensions Interior dimensions Window dimensions Interior volume Temperature range Power Oven weight/shipping weight Exterior color

123.4W x 103 H x 87 D cm I 00 x 80 x 50 cm 30 x 48 cm 400 I up to 300 °C 208 V, 60 Hz, single phase 145/ 188 kg light gray, powder-coated

VI LU Cl:: 0 VI VI LU u u < c LU Q z LU :!: :E 0 u LU Cl::

701E23=US Despatch Ovens {LBB2-27-1) Digital controller with large, easy-to-read LED display. Operating range from 40°C to 204 ·c (I 04 °F to 400°F). Minimum temperature achieved with 20°C air at fresh air inlet and damper fully open 4.8 K W open coil heater for rapid heat-up rates. Corrosion resistant type 304 2B stainless interior and ducting. Forced circulating airflow. Fan circulates air after it is heated to provide uniform beat distribution. Unique chamber design and 2 inches of high grade insulation to minimize heat loss, external thermal spots and air leakage. Unique airflow design for maximum temperature uniformity of± 3°C at l 50°C or ± 4°C at 204°C. Fan, heater and controls located above oven chamber for convenient access and to prevent spilled materials from reaching fan and heater. Solid state relays for proportioning temperahire control. Two shelves can be easily removed and adjusted on 2" centers. Not to be used with

flammable solvents, materials or enclosed

containers. If your prneess involves flammable solvents, consult the Otto

Bock's Equipment Specialist.

Stand for Otto Bock Ovens Fo1111d 011 page 21

pat h

I I

Technical Data

Work chamber Overall external dimensions Manual reset Recirculating motor Diameter exhaust Power Shelf capacity Overall load capacity Oven weight/shipping weight UL and C-UL

OVENS

37" W x 35" H x 37" D (27 cubic ft.) 43" x 43.5" x 51.5 (approx.) hi-limit control 1/4 HP; airflow capacity: 240 CFM 2 1/2" - 14 CFM 240 V, 50/60 Hz, Single Phase 501bs.

600lbs. 550 lbs. (250 kg)/635 lbs. (289 kg)

approved

D

II

701 E18=US PDQ Ovens (BT-3) OTS has developed a new oven capable of bubble forming and heating sheet plastic while taking up a minimal amount of floor space. The BT-3 Infrared Oven is big enough to heal most of your KAFO sheet plastic and has enough drop for even the biggest check socket, but it only takes up a corner space in your lab.

The BT-3 features a bank of lights on the top as well as on the bottom providing efficient and even heating of bubble forming plastics. The BT-3 is truly the best of both worlds with its small size and large capacity.

Technical Data Stainless steel construction Four 650 watt infrared emitters on top and four 650 emitters on bottom 1 nterior light Two double pane viewing windows Programmable digital temperature controller Teflon coated sheet plastic tray

Exterior Dimensions Interior Dimensions

Power

32" W x 6 1 " H x 49" D 28" W x 24" H x 40" D (18" clearance for bubble forming)

220 V, 30 amp, single phase

0S0c:U�j 0� C!An'Qh1p �\:\- � � qf:-Po O\N.l\..to-\t� �\oo \\,. \.��l� � ·�tak:C..\. \: sra1.z �ov-3� �("{..\..kC°" \I. \QJ.\�.

J­I

701E19=US & 701E21=US PDQ Rollabout Ovens (6/B & 7 /C) The Rollabout models are an excellent solution whether you routinely heat large sheet plastic for hip spicas or just the occasional AFO or check socket. Two different sizes meet your thermoforming needs with a height adjustable tray.

The bottom of the Rolla bout oven is a silicone epoxy coated tray, mounted on casters, which can be rolled to your vacuum area. No more burnt arms or trying to find a place lo set down your hot plastic. ·

10 \ £. \ S==- D5 �a\\<ADotAt o� SIA d()��

Technical Data

Stainless steel construction 650 watt infrared emitters Interior light Double pane viewing window Programmable digital temperature controller Teflon coated sheet plastic tray

Exterior Dimensions 6/B

7/C

Interior Dimensions

6/8

7/C

Power

48" W x 20" H x 55" D 54" W x 20" H x 55" D

36" W x 20" H x 48" D

48" W x 20" H x 48" D

220 V, single phase

OVENS

a

701F17=G-USA Otto Bock Socket Router "Electronic" for use with a central dust collection system With a m.inimum air velocity of 20 m/s and a negative pressure of 703 Pa, 0 of collection system mount: 12.5 cm. Steel machine body, continuous electronic speed control, electronically controlled exhaust brake and sk.id controlled cutler motor, halogen light 12/20 W with flexible mount. Ball and socket joint with holding rod and flex.ible hose, 0 12.5 cm. Provides optimal positioning of dust extraction shroud. Protective shaft housing, two lengths, shaft thread 5/8" inner.

Electrical Equipment

Main safety switch, on/off push-button for router motor, electronic speed controller with motor protection, emergency power shut-off foot switch, approx. 2 m power cord.

Standard Equipment

1 pc. 702F6=27 Wrench, 2.7 cm I pc. 702F28= I Floor Fastening Set l pc. 702F7=5/8 Threaded Stud, for tools with 5/8" l pc. 502K2=5/8 Protective Nut, 5/8" inner I pc. 702F77 Dust Extraction Shroud I pc. 702F93=1 Protective Shaft Housing, long I pc. 702F41=2 Protective Shaft Housing, short

Technical Data

Height Space Requirement Power RPM Router Motor continuous Noise Level Shaft Length Working Height Router weight/shipping weight Color

140 cm 110 x 130 cm 208 V, 60 Hz, single phase I/min max. 3 800 75 dB(A) 46 cm I 00 cm (approx.) 120/2 15 kg light gray (RAL 7035)

en LU Ci:: 0 V\ V\ LU u u <C c LU c z LU :e :e 0 u LU Ci::

Drum Sander· Foulld Oil page 2 I

Knife Blade Cutter· Found Oil page 2 I

Knife Blades Found on page 2 I

Conical Cutter Found oil page 22

' ' . .. ,..m�·�

. ' :·f.:::;!j �t<r�·�. , , "

' \: \,._,._-. · •·�°'-�·F. ·.7':

Rasp Heads Found 011 page 22

701F20=USA Otto Bock Electronic Grinding and Milling Machine for Use with a Central Dust Collection System Has a minimum air velocity of 20 mis and a negative pressure of 771 Pa. 0 of collection system mount: I 2.5 cm. Swings horizontally. Manual height adjustment is mechanically­assisted. Heavy, solid construction with steel colunm. Electronic variable speed control. 5/8" inner shaft thread. Removable protective housing for router shaft. Rotatable dust extraction shroud for direct dust collection. Swivel mount and flexible hose 0 I 0 cm.

Electrical Equipment

Main safety switch, on/off push-button for router motor, electronic speed controller with motor protection, emergency power shut­off foot switch, approx. 2 m power cord.

Standard Equipment

l pc. 702F6=24/27 Wrench, 2.4/2. 7 cm I pc. 702F28=1 Floor Fastening Set 1 pc. 702F 7=5/8 Threaded Stud I pc. 502K2=5/8 Protective Nut l pc. 702F2 7 Dust Extraction Shroud I pc. 702F 93=1 Protective Shaft Housing

Technical Data

Height Space Requirement Power RPM Router Motor Noise Level Shaft Length Working Height Weight Color

14 9 cm approx. I I 0/ 150 cm 208 V, AC, 60 Hz, single phase I /min min. 800/max. 3800 75 dB(A) 46 cm 70-140 cm 125 Kg light gray (RAL 7035)

701F21=US Trautman Dual Speed Carver -(2200) Sturdy head mounts, strongly anchored to eliminate vibration and maintain desired head position, for accuracy. Convenient position locks that allow simple and quick adjustments to tilt, horizontal, and height positions with only 1 /3 ofa turn. A solid tool shaft for smooth, quiet operation with minimum maintenance. The shaft is mounted with industrial bearings and couplings. A helpful, heavy-duty, adjustable work lamp that illuminates pivotal areas when wanted.

ROUTERS

A lasting finish, coated with industrial Rustoleum® for added protection and excellent appearance. Low maintenance. No brushes to change. Lubrication lasts I 0 years with normal use. Built-in thermal protectors eliminate remote heater coils subject to nuisance tripping.

Technical Data

General Electric Motor High Speed Low Speed Power Base

Height Head

Shaft Extension Shaft Tlmads Shipping Weight (approx.)

1/2 I-IP -3450 RPM 1/16 HP-1725 RPM 115 V, AC, 60 Hz Casting 17" x 1 9" drilled for 1/2" hold-down bolls

63" Overall 38" including motor, motor mount casting, and shaft

14 1/2" 1/2" x 13 st.;>n.clc;;>i-ci. 300 lbs.

II

70153=G-USA-SP Universal Band Saw For working with wood, plastics and non ferrous metals. Closed steel construction, four speeds. The saw blade runs over two rubber covered aluminum wheels and is fully enclosed up to the cutting area. Easily accessible tlu·ough two doors. Precision tluee roller guide above the table, table may be tipped up to 45° to the right, limit stops may be mounted on the lefi and right sides of the saw blade. 0 of collection system mount JO cm.

Electrical Equipment

Motor protection switch, electronic motor brake, approx. 2 m power cord.

Standard Equipment

I pc. 708B4=3380 Saw Blade for Wood

Technical Data

Dimensions Space Requirement Cutting Height Cutting Width Saw Blade Speed Saw Blade Size Table Size Power Requirement Saw weight/with case Color

84.5 x 74. 5 x 192 cm 200 x 120 cm 30 cm 44 cm 68/176/375/967 m/min 338 x .6-2.5 crn 55 x 72 cm 208 V, 60 Hz, single phase 127/220 Kg

light silver gray

V\ LI.I Ci:: 0 V\ V\ LI.I u u c:C c LI.I c z LI.I :e :e 0 u L&J Ci::

Band Saw Blade for Wood Found 011 page 23

Band Saw Blade for V2A

Fo1111d on page 23

Band Saw Blade Found 011 page 23

701S10=1-US 14" Band Saw with Enclosed Stand (28-475X)

SPEEDS

TABLE Size

BAND SAWS

3000 SF/M

16" x 16" Includes machine with enclosed stand, I'/, HP, I I 5/230V, guarded drip proof motor with resilient mount, push button switch, chip chute, blade and belt guards, arbor and motor pulleys and V-Bclt, blade guides, Platinum Pro� band saw blade, quick release blade tension lever, integrated 4" dust port and instruction manual.

Miter Gauge Groove Tilt Height from Floor

3/8" deep x 3/4" wide to right, 45°; to Iefl, 9° 42 3/411

Technical Data

1/4" supplied 314" Max

94"

MOTOR I 1/2 HP, 1 15/230 V, 60 Hz, single phase

BLADE Width Maximum Length Maximum Minimum Standard

91 1/2" 9 3 1/2"

CAPACITIES Blade to frame 13 3/4" Under Guide and Wheel 6 1/4" Under Guide and Wheel 12 114" (witlr 28-984 aCC)'. lreight a11ach111e11t)

Length (ivith 28-984 accy. heiglrt af/ach111e11t)

Maximum I 0611 Minimum 103 1/2" Standard I 05"

OVERALL DIMENSIONS Height on Stand 65 1/2" Width on Stand 2511

Front to Rear I 7 1/2" Weight 27 5 lbs.

701S10=2-US 14" Band Saw with 1HP Motor and Enclosed Stand (28-206) Includes enclosed stand, l HP, 120 V motor and switch, quick release tension lever, 2-speed pulley position, 4" dust collection port, 9-spoke wheel, blade and belt guards, arbor & motor pulleys and V-belt, blade guides, wood-culling blade and instruction manual.

Technical Data

MOTOR

CAPACITIES Frame to blade

I HP, 120 V, 60Hz, single phase

13 3/4" Under Guide and Wheel 6 l/4" Under Guide and Wheel 12 1/4" (with 28-984 lreiglrt al/ach111e11t)

SPEEDS 2500/3300 SFPM ( 762/1006 SMPM)

TABLE Size Groove Tilt Height from Floor

BLADE Width Length:

Maxinmm 94" Standard 9 3 11211

1 6" x 16" 3/8" x 3/4" 45• R; 3°

42 3/.''

3/411 maximum

Minimum 9 1 1/211

Length (with 28-984 lreiglrt <11tach111e111):

Maximum 106" Minimum 103 1/2" Standard I 0511

OVERALL DIMENSIONS Height Width with open stand Front to rear Weight

65 1/211

3 1" 17 l/211

201 lbs.

m

701P25=2G-USA-SP Otto Bock Belt Sander For accurate sanding of light angle, flat surfaces. Improved suction with built-in suction insert and completely sealed machine body. 0 of collection system mount 10 cm, for use with central dust collectio11 system with a minimum air velocity of 20 m/s and negative pressure of 1220 Pa.

Electrical Equipment

Motor protection switch, 2 m power cord.

Standard Equipment

3 pcs. 64906=1 80 x 30 x 40 Linen Sanding Belt, L x W 180 x 30 cm, grit 40

l pc. 702F28= I Floor Fastening Set

Technical Data

Dimensions Space Requirement Belt Width Belt Speed Power RPM Sander Weight /Shipping Weight Color

70 W x 160 H x 77 D cm 250 x 175 cm (approx.) 30 cm 12 m /sec

208 V, 60 Hz, single phase l /min 1500 400/485 Kg light gray (RAL 7035 )

(/) 1.1.J 0::: 0 (/) (/) u.I l..J l..J < Q 1.1.J Q z 1.1.J :E :E 0 l..J LU 0:::

Linen Sanding Belt Fo1111d 011 page 23

Sanding Belt Fo1111d 011 page 23

Sanding Disk Found 011 page 23

701 P4=G-USA Otto Boele Two Speed Belt Sander For accurate sanding of right angle, flat surfaces, floor model. 0 of collection system mount I 0 cm, for use with central dust collection system with a

minimum air velocity of 20 mis.

Electrical Equipment

Motor protection switch, speed selection switch, 2 m power cord.

Standard Equipment

3 pcs. 649G6=200 x 25 x 40 Linen Sanding Belts, L x W 200 x 25 cm, grit 40 l pc. 709S 1 5=6 Allen Head Wrench I pc. 709S21=8 Allen Head Wrench I pc. 702F65 Floor Fastening Set

Technical Data

Dimensions Space Requirement Belt Width Belt Speed Power RPM

80 W x 152 H x 85 D cm 140 x 180 cm (approx.) 25 cm 15/30 m/scc 208 V, 60 Hz, triple phase I /min 1 500/3000

Sander Weight/Shipping Weight Color

107/155 Kg light gray (RAL 7 035)

701P26=US 611 Belt/1211 Disc Sanding Center™ (31-300) Includes a l 1/2 HP, 1 1 5/230 V motor (wired for 120 V operation); on-off toggle switch, stand, dust collector connector, sliding pivot pin for circle sanding, 80-grit abrasive belt, 50-grit abrasive disc, wrench and instruction manual.

Technical Data

MOTOR

SPEED Belt Disc

ABRASIVE BELT Size

DISC DIAMETER

TABLE SIZE AND TILT Belt Disc Dust Collection

OVERALL DIMENSIONS Size Weight

I 1/2 HP, 120/240 V, 60 Hz, single phase, (wired for 120V)

3000 SFPM (914 SMPM) 2100 rpm

48" L x 6" W 12"

15" x 7 1/2" (Tilts 45" up and down) 12" x 16 1/2" (Tilts 45' up and down) Diameter 4"

3 1" W x 58" H x 1 9" D 290 lbs.

BELT SAND ERS

m

m

701 B3=NG-USA Floor Model Drill Press Features infinitely adjustable RPMs and 34 x 28 cm work surface. Table height is adjustable on a geared steering rack. Digital drill depth display. Digital RPM display. Available without chuck and without morse taper. 11 spindle speeds, RPM and drill depth indication through scale, without light.

Electrical Equipment

Motor protection switch and no-voltage release, emergency power shut-off and light (two bulbs included). 2 m power cord.

Technical Data

Continuous/Normal Drilling Capacity Spindle Drilling Depth Working Radius Colunm 0 Distance Spindle to Table Spindle RPM

Power Weight, net/gross Color

1.8/2.3 cm MIO 10 cm 24 cm 8.2 cm 16-88 cm l/min 250/315/500/630/800/1000/

1250/ 1600/2000/2500/4000 208 V, 60 Hz, single phase 205/255 Kg light gray (7035)

D RILL PRESSES

70184=1-US 16 1/2" Variable Speed Drill Press (17-900X) Includes machine with 3/4 I-JP, .120/240V induction motor; pulleys, belts and speed control, 1/2" capacity chuck and key, rack and pinion table raising/lowering mechanism and instructional manual.

Technical Data MOTOR

MOTOR CONTROL

3/4 HP, 120/240\1, 60Hz, single phase

Up-front and push button

SPINDLE SPEEDS (Two variable speed ranges)

Low 150-1100 rpm

High 500-3200 rpm

TABLE WORKING SUR.FACE 14" x 14"

BASE WORKING SURFACE 13 1/2" x 13 1/2"

TABLE TILT 90°

COLUMN DIAMETER 3.15"

SPINDLE AND CHUCK TAPER Jacobs 33

QUILL

Diameter Stroke

CAPACITIES Key Chuck Chuck to table Chuck to base Max. dia. Hole in steel

2" 6"

112" 2 4 112" 47" 5/8"

Max. dia. Hole in cast-iron 7/8"

OVERALL DIMENSIONS Size Front to Rear Weight

15" W x 74" H

28" 230 lbs.

70184=2-US WORKING SURFACE

16 1/2" Drill Press (17-965) COLUMN DJAMETER Includes basic machine with 3/4 HP, 120/240 V induction motor; 5/8" capacity chuck and key, SPINDLE TAPER

cast-iron table, rack and pinion table QUILL raising/lowering mechanism, external depth stop

and instruction manual. Diameter Stroke

Technical Data CAPACITIES MOTOR 3/4 HP, 120/240 V, 60 Hz, Key Chuck

1 720 rpm, single phase Chuck to table Chuck to base

MOTOR CONTROL Up-front and push button Max. dia. Hole in steel

SPINDLE SPEEDS 16 speeds (215, 310, 340, Max. dia. Hole in cast-iron

435, 490, 510, 580, 675, OVERALL DIMENSIONS

735, 750, 1200, 1380, 1505, 1850, 2035, 2 720 rpm) Height

Width

TABLE Tilting with C-clamp Depth edge and diagonal slots Weight

Size 14" x 14'

101/4" x JI 1/2"

3.15"

Jacobs 33

1 3/4" 4 7/ 8"

5/8"

24 1/2" max. 44 1/2" max. 5/8" 5/8"

68" 14" 2 7 1/2" 1 95 lbs.

m

m

701Z122=US Unimaster®* (150) • One-piece multi-pad filter assembly • High quality filter media • Automatically cleans upon shutdown • Small foot print (save floor space) • Removable 3 cu ft bin

Technical Data

Exhaust connection Maximum airflow Static Pressure at Maximum Air Flow Sound level Filter area Power Motor horsepower Dust bin volume Overall dimensions Weight

• Simple yet effective • Quiet operation • No compressed air required • Dependable

8" of diameter 1200 CFM 7. I inches of water 86 dBa 150 ft2

230 V, 460 Hz, 3 k W, 60 Hz 3 Hp 3 ft3

3 l"Wx83"Hx32"D

695 lbs.

Easy Duct System The Easy Duct system, a purchased with your filtration system, is a modular ductwork system that requires no special tools for installation. All components are connected with an Easy Duct clamp with built in gasket that seals the individual components together. Easy duct can be supplied in either galvanized or stainless steel construction.

Benefits Clamp-together components make it easy to install or change ductwork quickly. Easy to connect to existing ductwork. Components and adapters to fit every dust collection system. Smooth interior surfaces help prevent clogs. Lock-form construction reduces static pressure Save money whether planning to add, remove, replace, or install ductwork.

Options & Accessories Adjustable "slip joint" reduce cutting and fabricating Available in galvanized or stainless steel 4" - 22" diameters 30°, 45°, 60° and 90° elbows

Component parts available

Adjustable nipple Reducer Pick-up adapter Rectangular/round transition Floor sweep Router hood Hose adapter Blast gate Suction hood In-cut Tap-in Branch Clamp Y-piecc

•Unimastcr is a registered trade name of Donaldson Company, lnc.

D UST COLLECTION

7001Z2=USA Mobile Dust Collector Mobile exhaust system, designed to capture, transport and separate dry materials such as wood and plastics dust. Suitable for connection to two or three machines.

Features

• High vacuum efficiency • Low current consumption • Compact dimensions •Low weight

Technical Data

Electrical equipment Power Exhaust connection Max. flow volume Max. negative pressure Sound level Filter area Dust Collection Volume Dimensions Weight

• Highly efficient separation •Long life due to tough design • Delivery includes mobile base with caster, one dust bag

Motor with mounted switch-plug-combination 110 V, 60 Hz, 0.75 kW, AC (UL-approval) 14 cm 1650 m 3/h 1750 Pa 78 dB(A) 2.2 m2 1 75 I I 09 W x 209 H x 58 D cm 40 kg

701Z121=USA Mobile Dust Collector Mobile exhaust system, designed to capture, transport and separate dry materials such as wood and plastics dust. Suitable for connections to only one machine.

Features

• High vacuum efficiency • Low operating expenses • High flexibility • Mobile, compact design

Technical Data

Power Exlrnust connection 0 (Nominal width) Nominal volume flow Volume flow monitor Negative pressure at the interface area

Filter area Filter material Dust collection volume Dimensions Weight

• Easy to maintain • Long-life filter • Universal application • Delivery includes one dust bag

110 V, 60 Hz, 2.20 kW, AC (UL-approval)

12 cm 1120 m3/h Negative Pressure Gauge

2050 Pa

4.30 m2 Category C, electrically conductive, washable 135 J

108.5 W x 199.5 H x 65 D cm 88 kg

m

m

(I) 0110tOCI( t!:r.:=M ....... .... ....... ,

755E6=110 Otto Bock Vacuum Machine For fabricating thin walled plastic laminates and for the vacuum forming of thermoplastics. Fully automatic, controlled th.rough two contact pressure gauges. Two separately adjustable vacuum banks, each with tlu·ee co1mections. Water trap with visual and audio control, uses 755Z20=2 Replaceable Filter.

Basic accessol'ies

One 709G 9= 17 One 616R2=10x2

Spanner, I. 7 cm PVC-Hose, 10 111

Technical Data

Power Pressure, adjustable Suction capacity Dimensions Vacuum Weight/Shipping Weight Color (fine detail lacquer)

110 V, 60 Hz, 0.11 kW, AC 220 mbar (=78 %) 25 I/min 44 W x 23 H x 45 D cm 1 7/19 kg gray beige (RAL 1019)

755E15=1-USA Single Motor Vacuum Pump

Technical Data

3/4 HP Oilcss Pump

30 Gallon tank

Automatic On/Off

16-25" of Mercury

VACUUM PUMPS

755E15=2-USA Double Motor Vacuum Pump

Technical Data

3/4 HP Oiless Pump

30 Gallon tank

Automatic On/Off

16-25" of Mercury

m

743L100=110 L.A.S.A.R.™ Posture Tile L.A.S.A.R. Posture generates a laserbeam to quickly and precisely determine tile center of balance. This beam is projected as a ve11ical laser line on the body or object being measured. The laserbeam can be shifted. L.A.S.A.R. can be used to clleck aligiunent. The display unit serves to indicate the measured values and to control measuring.

The L.A.S.A.R. Posture

• Force-sensing platform with integrated force measurement cells

• Projection system with laser and line optics • Positioning system with electrnnics and step motor

• Display unit • Leveling plate

Technical Data

Power Measurements:

Folded Open

Weight

Laser

I lOV, 60 Hz

55 W x 15 H x 70 D cm 55 W x 15 H x 120 D cm 9.5 kg

The laser is rated to Laser Class 2 (under normal operating conditions, the Laser Class I [DIN 60825] threshold value is not exceeded). 758Y28 Angled Frames with Grates

Frames of galvanized angle iron for installation in the floor. Outer dimensions ca. 7 1.5 x 252 cm, with tlu·ee galvanized steel grates 70 x 83 cm, weight 4 5 kg.

75861=4 Parallel Bars Powder-coated steel construction, height adjustable from 64 to 100 cm, width adjustable between 0 to 60 cm, with canted bases. May be folded for storage when not in use.

Article no. Length

758Gl=4 400 cm

Bar Weight/Shipping Weight

61/4 kg

75865=1 Otto Bock Test Platform with Ramp and Stairs The Test Platform with Ramp and Stairs offers you the option of testing your patients in situations similar to those in everyday life. Use it for seminars, patient appointments and demonstrations. Requires assembly.

Technical Data

Length Height of handrail Height of platform Width Material

Weight

300 cm 95 cm 51 cm 62 cm V2A-steel base. Aluminum alloy stairs, ramp and handrail with clear lacquer 145 kg

MISCELLANEOUS EQUIPMENT

710D4 Torque Wrench Span 4-30 Nm (35.4-265.4 lbf. in.), square drive for bit holder with 1/4" hexagon drive.

Torque value set on end of grip and visible on the scale, with bits

Total wrench length Weight

755T5 Vacuum Deep Draw Tools Consisting of

710Y2=3, 71 OY2=4, 710Y2=5, 710Y2=6, 710Y2=8, 710Y2=10 24.5 cm 0.560 kg

755X21 755T 4=360

Stand Size 49 x 32 x 30 cm

755Xl8 755X22=360 755X23

Circumferential Frame, aluminum, inner-0 36 cm, for materials up to 2 cm thick

Bracket Vacuum Tube with 755X93=360 Sealing Disk Two-way Vacuum Tube

m

Stand for Ovens

758S11 Support for Oven 701E7

Technical Data

Dimensions Weight Color

120 W x 76.5 H x 65 D cm

21 kg light gray (RAL 7035)

758S10 Support for Oven 701E9

Technical Data

Dimensions Weight Color

102.6 W x 76.5 H x 61.4 D cm 1 9 kg light gray (RAL 7035)

Sanding Tools fo1· Routers

7 49F6 Otto Bock Sanding Drum Made of flexible foam, with conical hole. Fits on shaft of Otto Bock socket routers, outside-0 7.25 cm Complete with one sanding sleeve, grit 80 Weight 0.230 kg

749F6=T Sanding Drum Made of flexible foam, with conical hole fits on shafi of the Trautmann router only only, outside-0 7.25 cm Complete with one sanding sleeve, grit 80 Weight 0.250 kg

729W26=5/8 High Quality Knife Blade Cutter For wood and Pedilen" rigid foam plastic. Includes two replaceable 729Y50 HSS Knife Blades. B G test sign (BG=Berufsgenossenschaft; Professional Association).

Article No. Th1·ead Height

729W26=5/8 5/8" 5 cm

729Y50 Knife Blades

0 Weight

5 cm 0.620 kg

HSS, for 729W26 High Quality Knife Cutter, 2 Piece Set. Weight 0.050 kg

Cutting Tools for Routers

729W23=5/8 Conical Cutter HSS, fine cut, length 7.5 cm, largest 0 2.8 cm, for working with plastics.

Article No. Thread 0 729W23=5/8 5/8"

Cutting Tools for Routers

729W17=5/8 Rasp Head For working with plastics, fine cut.

Article No. Thread Height

729Wl 7=5/8 5/8" 5.2 cm

Weight

0.200 kg

0 Weight

3.7 cm 0.350 kg

ACCESSORIES

Cutting Tools for Routers

729W8 Rasp Heads Tool steel, for wood and Pedilcn" rigid foam plastic, medium cut

Article No. Thread Height 0 Weight

72 9W8=1 5/8" 8.5 cm 5 cm 0.900 kg 72 9W8=2 5/8" 6 cm 5 cm 0.700 kg 729W8=3 5/8" 7 cm 3 cm 0.260 kg 729W8=4 5/8" 4 cm 3.6 cm 0.250 kg 72 9W8=5 5/8" 5 cm 4 cm 0.690 kg

Cutting Tools for Routers

729W3 Rasp Heads For Pedilen" rigid foams, foam materials and thermoplastics.

Article No. Thread Height 0 Cut

72 9W31=1 5/8" 9 cm 5 Clll medium 729W31=2 5/8" 9 cm 5 cm fine

72 9W32=2 5/8" 5 cm 4 cm fine 729W33=1 5/8" 12 cm 5 cm medium

72 9W33 =2 5/8" 12 cm 5 cm fine

Weight

0.459 kg 0.459 kg

0.26 1 kg 0.767 kg

0.76 7 kg

m

708B4=3380 Band Saw Blade for Wood Original Swedish steel, .05 cm thick, 4 teeth per inch, .6 cm spacing,

ready for use, sized and sharpened

Article No. Width Length for Machine Weight

708B4=3380 1 . 5 cm 338 cm 701S3 0.170 kg

708B5=3380 Band Saw Blade for V2A For V2A and other steels, original Swedish steel, .065 cm thick, 18 teeth

per inch (for stainless steel sheets .2-1 cm thick), ready for use.

A1·ticle No. W idth Length

70885=3380 .8 cm 338 cm

708B6=3380 Band Saw Blade

for Machine Weight

70 I S3 0. 1 35 kg

For plastic material and light metals, original Swedish steel, .065 cm

thick, 1 0 teeth per inch (for .2-1 cm sheets), ready for use.

Article No. Width

70886=3380 .8 cm

Length

338 cm

for Machine Weight

70JS3 0. 1 35 kg

649P8=350x40 Sand Paper Disk, self-adhesive For 701P30=0, for wood and plastic work, 0 35 cm, grit 40

Sanding Belt for 701 P4=G

649G6 Linen Sanding Belt For wood and plastic work

Article No. Grit

64906=200x25x40 40

Size

200 x 25 cm

Sanding Belt for 701P30=G

649G14 Sanding Belt For wood and plastic work

Article No. Grit Size

6490 l 4=250x60 60 250 x 5 cm

6490 I 4=250x I 20 120 250 x 5 cm

6490l4=250x 180 180 250 x 5 cm

for Weight

701P4 0.820 kg

for Weight

701P30=0 0. 1 90 kg

701 P30=0 0 . 1 90 kg

701P30=0 0 . 1 90 kg

Terms of Sale I % 15 d ays; net 30 days, payable in U.S. dollars. We accept the following charge cards for immediate payment: Visa', Mastercard', and American Expressv.

New Accounts Shipments are sent C.O.D. until a credit l ine has been established . To establish a cred it line, please fax a completed credit application to our Credit Department at 800.655.4963. A copy can be found on the inside back cover of this price list.

Shipping All Otto Bock equipment is shipped Freight On Board (F.O.B.) from Otto Bock. If no shipment method is specified, Otto Bock will use the most economical and direct shipping method available.

Damaged Goods Most Otto Bock orders arc shipped by United Parcel Servicern (UPS). If you receive d amaged goods, please immediately contact your local UPS oiJice to submit a Damaged Goods Report. This is required by UPS.

Return Goods Policy A return authorization number (RA#) must be obtained on all equipment being returned for cred it. Please contact Customer Service at 800.328.4058 to receive an RA#. When calling for an RA#, be prepared to give the following information:

• Your company name • Your invoice or packing list number

• Your account number • Reason for return

• Part number and description, including quantity

being returned RA#s are only valid for 30 days* from date of issue.

Unused Equipment 1-30 days: 3 1-60 days:

6 1+ days:

Can be returned at customers expense Can be returned at customers expense, plus a $25 or 25% restocking fee, whichever is greater No returns

*No returns on used equipment

Otto Bock will not provide credit for: • Special Order Hems

• Items that have been designed specifically to meet a

customer's request • Items out over 60 d ays from date of invoice

RETURNS & WARRANTIES

Limited Warranty

Otto Bock Health Care Lab Equipment The following Limited Warranty applies lo all Otto Bock Health Care Lab Equipment, herein referred lo as the "Products".

Otto Bock Health Care warrants the Products to be free from defects in materials and workmanship. Subject to normal wear and tear, this Limited Warranty applies only to Products that have been used in accordance with the manufacturer's instructions and recom­mendations. This Limited Warranty is effective for a period of two years from the original date of delivery of a Product to a customer. Otto Bock Health Care will repair, replace, or credit to the original purchaser the Product's cost (at Otto Bock Health Care's d iscretion) during the warranty per iod.

This Limited Warranty does not cover d amage due to accidents, mis­use, abuse, tampering, neglect, unauthorized modification or incor­rect maintenance.

THE EXPRESS WARRANTY SET FORTH HEREfNABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH OTHER WARRANTIES ARE HER.EBY DISCLAIMED AND EXCLUDED BY OTTO BOCK HEALTH CARE.

Non-Otto Bock Equipment

ACTRA Machine Products (Trautman) One year warranty

Delta Five year warranty on the 28-4 75X and the l 7- 900X Two year warranty on the 28-206, 3 1-300 and the 17-965

Despatch One year warranty on parts 90 d ays for labor

Donaldson-Torit Unimaster 1 50: Ten year warranty

Accessories One year warranty

OTS One year warranty

m

\

? \ f I l )

.j

l l

NOTES

QUALITY FOR LIFE USA: 800.328.4058 • Fax: 800.962.2549 • www.ottobockus.com Canada: 800.665.3327 • Fax: 800.463.3659 • www.ottobock.ca

All trademarks in this document arc properties or their registered owners. ©2003 Otto Bock HealthCare LP. • Printed in the USA • 03070247.1 • 10/03

,.

j