contents device a griffin armament flash comp provides suppressor compatibility, as well as...
TRANSCRIPT
1
CONTENTS
2 The UIC AR-15 Rifle
8 The NEW UIC10-A Rifle
10 The Patented Auto-Lock™ Lever System, Product Specifications & Finishes
11 Featured Product: Tactical Lever Upgrade
12 Optic Mount Combos
13 The Swing-Mount System
14 Optic Mounts: AD-68 Aimpoint Mounts
16 Optic Mounts: Double-Lock Recon Scope Mounts
18 Optic Mounts: AD-DELTA and Scout Scope Mounts
19 Optic Mount Specs
20 Ring Sets & QD Kits
21 Specialty Mounts & Bases
22 Mini Bases
24 Modular Bases: B-Series
26 Aimpoint/Trijicon Bases and Modular Risers
28 Specialty Risers & Mounts
29 Specialty Bases & NV Mounts
30 Risers & Grips
31 Laser & Flashlight Mounts
32 American Defense Swag
IBC Special Discount Program
IBC Dealers & Our Warranty
American Defense MFG was founded with an idea and hard work. What developed was
the QD Auto Lock System. All American Defense MFG products
are 100 percent designed and built in the U.S.A. All of our
products are designed by shooters with
one goal, Customer Satisfaction. For 2015,
We are proud to introduce The Universal
Improved Carbine, a line of AR-15 pattern rifles redesigned from the ground up. With fully ambidextrous
controls and overbuilt components, no detail was overlooked, not one short cut was taken. The UIC is
Intentionally Superior.
2 3
UICUniversalImprovedCarbine
American Defense Manufacturing is proud to introduce a brand new line of rifles, The UIC. The Universal Improved Carbine is available now in three different models, MOD 1, MOD 2, and MOD 3.
4 5
Ambidextrous lower receiver
The attractive, billet 7075-T6 lower receiver is outfitted with an ambidextrous magazine release, bolt catch and release, and selector switch. The magazine well features reinforcing ribs that make the magazine well 40% stronger than mil-spec forged at only ½ an ounce of weight change. The trigger guard is ready for winter gloves without manipulation. Radii and chamfers throughout make this billet lower a marvel that stretches the capabilities of modern production CNC manufacturing. A 20 degree competition style mag well is concealed in the design, allowing lightning fast magazine changes. A right side bolt catch and release lever is standard for every UIC lower, a feature not found on many comparable industry offerings. An integral adjuster allows the end user to compensate for tolerance between your upper receivers and your favorite lower. The selector pictogram is compatible with 50-90 degree selectors.
Modular Ambidextrous Selector switches
The ADM configurable selector switches come standard on ADM carbines in a long tall left paddle and an abbreviated short right paddle with a 60 degree hub. The kits are available with short selector switches as well.
Muzzle device
A Griffin Armament Flash Comp provides suppressor compatibility, as well as unparalleled muzzle stability and recoil control with night vision compatible flash reduction similar to A2’s on 14.5" and longer barrels. The Griffin flash comp received the NTOA’s coveted perfect “Gold” evaluation from multiple tactical officers, and is LAPD approved for patrol rifles.
Bolt Carrier Group
Materials: 9310 (bolt), 8620, (carrier), 4340 (key, cam pin, extractor) ADM’s bolt carrier was critically accessed at the component level. Every component was processed in accordance with the latest TDP including assembly, staking, all heat treats and shot peening to specification. Every component is given a finish pass for optimal surface finish, and grinding is actually done post heat treat. Half a dozen Melonite QPQ processing facilities were evaluated before selecting the finest corrosion resistant lubricous finish available. The BCG is so glassy smooth it requires no break in period. Consulting with a group of armed professionals with over 30 combined years of field use of M16 family rifles, the T&E testers unanimously agreed that the ADM BCG was the finest they had seen.
ADM HD Buffer
The standard carbine buffer is inferior by design with far from optimal reciprocal and non reciprocal mass and an abbreviated platter of weights that operate as one sliding mass without room or plurality necessary to force them to be staggered. The ADM reliability enhancing buffer provides non-reciprocal weight matching the rifle length buffer, coupled with a platter of weights that impact in a staggered sequence to eliminate bolt bounce and provide smooth performance without resorting to springs or hydraulic systems which can wear and fail.
Trigger group
The ADM mid and top grade UIC carbines come with the outstanding ADM adjustable two stage match trigger. The ADM two stage trigger is adjustable for pre-travel, and over travel. Made from S-7 Tool steel, the ADM two stage match trigger is heat-treated, EDM cut, polished, and coated with Diamond-like Carbon- a coating with a 80-90RC hardness and a very low coefficient of friction of .1-.2. Combat durable, competition worthy, the ADM adjustable two stage trigger group puts ADM rifles in a class all their own.
UIC PROPRIETARY FEATURES
SpecificationsBarrel: 16", ADM lightweight contour 4150 CMV, button rifled, MPI tested, stressed relieved, pressure tested, hand lapped, Nitride QPQ Finish, 1:8 twist, .223 Wylde Chamber
Muzzle Device: Tactical Compensator
Lower receiver: 7075-T6 Billet, fully ambidextrous, Type III Teflon impregnated hardcoat anodize.
Upper receiver: Forged Milspec, Type III Teflon impregnated hardcoat
Bolt carrier group: Milspec full-auto, MPI, Phosphate coated
Trigger: Milspec trigger group
Buffer: ADM HD buffer
Color: Type III Teflon impregnated hardcoat black
The Universal Improved Carbine was designed to be a fully featured rifle that was ready to go out of the box with little to no modification for optimum use. Our idea for the Mod 1 UIC was to include as many premium usability, performance, and reliability features as possible at a price point that out competes any other market offerings in its class. We want to give the customer a high level of value while still maintaining the look, feel, and functionality of the Mod 2 and 3 UIC’s.
Do not assume the UIC Mod 1 is just another “budget” level AR pattern rifle. The Mod 1 is a workhorse that will serve you reliably day in and day out for years of hard use. ADM isn’t just assembling a rifle; ADM is designing and manufacturing rifles for their customers that are intentionally superior to existing systems.
MOD1
UIC’s will be available in:
5.56.223
.300 BLK MOD 1
Col
ors MSRP
$1500
UICUniversalImprovedCarbine
UIC Mod 1
6 7
UIC Mod 2 and 3
Building on the solid foundation of the Mod 1, the Mod 2 and 3 UIC’s include every feature a hard-use customer could want in a premium rifle for performance, reliability, and longevity. Not a single detail was overlooked while designing and testing these top of the line UIC models. The meticulous design and tedious assembly shows in the flawless functionality of these rifles in the hands of an end user.
The Mod 2 is truly a marvel of modern firearms design and manufacturing. It steps up performance and value with features like a billet upper receiver, HD Gas Tube, 2-stage adjustable trigger, and options for barrel length, forearm type, and color.
MOD2MOD3
UICUniversalImprovedCarbine
While all UIC’s come from the factory ready to accept Griffin Armament silencers, none are as optimized for that task as the Mod 3. Featuring our low profile, adjustable gas block with three carefully chosen settings, the Mod 3 includes all the overbuilt premium components of the other UIC’s. The pinnacle of the UIC line is a rifle built to fill any role, endure heavy use, and stand out above the rest.
Barrel: 12", 14.5" or 16", ADM lightweight contour 4150 CMV, button rifled, MPI tested, stressed relieved, pressure tested, hand lapped, Nitride QPQ Finish, 1:8 twist, .223 Wylde Chamber
Muzzle Device Options: ADM, SureFire, AAC, and Griffin suppressor ready muzzle devices
Lower receiver: 7075-T6 Billet machined, fully ambidextrous, Type III Teflon impregnated hardcoat anodize.
Upper receiver: 7075-T6 Billet machined, Type III Teflon impregnated hardcoat
Bolt carrier group: ADM premium milspec full-auto, MPI, Melonite QPQ finish
Trigger: ADM 2-stage trigger group adjustable for pre-travel, and over travel
Buffer: ADM reliability enhancing buffer provides non-reciprocal weight matching the rifle length buffer
Rail systems: Available 10.75", 13.5" and 15" options with Low Light, KeyMod, or M-LOK
Color: Type III Teflon impregnated hardcoat Black, Flat Dark Earth, ADM Grey, ADM Bronze, or ADM Green
Charging Handle: Fully ambidextrous, 7075-T6 billet handle
Gas Tube: ADM Heavy Duty
QD End Plate: Steel, anti-rotational
UIC’s will be available in:
5.56.223
.300 BLK C
olor
s MSRP$1900
MSRP$1750 MOD 3MOD 2
Col
ors MSRP
$2050MSRP
$1900 MOD 3MOD 2BRZ FDE GRY GRN
Specifications
8 9
UIC10-A
American Defense Manufacturing is proud to bring the next step of the UIC line to the market for 2016, a premium featured AR style rifle chambered in .308 Winchester/7.62x51mm NATO, the UIC-10A.
Featuring ergonomic fully ambidextrous controls, similar to what is found on the 5.56/.300BLK line, the UIC-10A is a standout among competitors for more reasons than just that. Each of the 4 configurations will feature a barrel length and/or contour all manufactured by Criterion Barrels Inc. The barrels are 416r Stainless Steel, 1:10 twist, Nitride finished, and the chambers are reamed to M118 Match specifications. Our barrels are capped with a suppressor mount muzzle device from the factory. The updated HD
Rail Interface featured on every rifle provides a stable, rigid, and secure free float versatile rail system available in our Low Light, KeyMod, and M-LOK patterns in 13.5” and 15” lengths. Each configuration features correct AR-10 length carbine receiver extensions, Sprinco carbon silicon extra power .308 action springs, and the HD Buffer ensuring reliable operation and eliminating any issues common to other .308 AR pattern rifles. The ADM Adjustable 2-stage Fire Control Group allows the shooter maximum control and helps ensure accurate rounds on target, every time. Finally, every rifle ships with Magpul MBUS Pro sights and Two (2) Magpul PMAG 25 M118 LR/SR magazines so you’re ready to shoot right out of the box.
Barrel: 14.5", 16" or 18", 1:10 Twist, 416r SS Nitride finished Hybrid profile barrel, M118 spec chamber
Muzzle Device Options: ADM, SureFire, AAC, and Griffin suppressor ready muzzle devices
Lower receiver: Aircraft Grade Billet machined, fully ambidextrous, Type III Teflon impregnated hardcoat anodize.
Upper receiver: Aircraft Grade Billet machined, Type III Teflon impregnated hardcoat
Bolt Carrier Group: ADM Enhanced .308
Trigger: A2S, Adjustable 2-stage trigger
Buffer: ADM reliability enhancing buffer provides non-reciprocal weight matching the rifle length buffer
Rail systems: Available 13.5" or 15" HDRI forearm in either Low Light, KeyMod, or M-LOK pattern
Grip: Magpul MOE
Stock: Magpul MOE SL, or Magpul ACS
Color: Milspec Type III Hardcoat anodize in black
Charging Handle: BCM Gunfighter MOD 4
QD End Plate: Steel, anti-rotational
MSRP$222425
MSRP$222425
Col
ors
Col
ors
MSRP$217000
MSRP$217000
Heavy Recon Weight: 8lbs 3.7oz
CSASS Weight: 9lbs 4oz
Battle Rifle Weight: 8lbs
DMR Weight: 9lbs 4oz
Specifications
UIC10AUniversalImprovedCarbine
UIC’s will be available in:
.308WINCHESTER
10 11
Features: Auto Lock System
The patented† Auto Lock System has been well-received in the industry, so much so that other accessory manufacturers are incorporating the design into their products. The system has the following advantages:
• Does not require proprietary tools for adjustment.
• Can be adjusted with your finger or a flat blade screwdriver.
• Lever can be configured to lock to the front or the rear.
• Superior clamping surface to ensure maximum rail engagement.
Colors
All American Defense MFG parts come in Type III Teflon impregnated hardcoat per military specifications. Certain products are available in Flat Dark Earth (FDE). See the American Defense website adm-mfg.com for details.
† U.S. Patent No. 7,823,316
Features: G.I. Mount
Offered on all American Defense products, the G.I. Mount is a tried-and-true alternative to the Auto Lock quick-release system, and has the following features:
• Heavy knurl for adjustment
• Wrench & slot cap
• Stakeable unit if needed
Materials & Construction
All American Defense MFG mount products feature the following:
• Precision machined from 6061 T6 Aluminum.
• Hard coat anodized for a lifetime of performance.
• Fully adjustable to fit both in spec and out of spec rail systems.
• American Defense MFG, LLC. products feature a lifetime warranty.
• Features The Auto Lock™ Lever system.
• Made with pride 100% in the U.S.A.
THE AUTO LOCK™ LEVER SYSTEM TACTICAL LEVER UPGRADE
If replacing the levers on an AD-Recon or any other dual throw lever mount, you will need to order two assembly’s. These levers will fit all American Defense Mounts except the AD-15R, AD-Delta and the AD-RMR-RH. (Extended thumb pad will face upward.) NOTE: Some mounts (mostly older models) use the smaller .187" bolt, compared to the new .203" bolt. To tell what bolt size you need, remove your throw lever assembly from the mount. With a calipers, measure the width and height of the throw lever cross bolt. If both measurements are .187", you need a .187" bolt. If the width measures .203", you need a .203" bolt. Alternatively, If 2 Quarters and 1 Penny fit snug in the cross bolt slot on the bottom of the mount itself, you need a .187" bolt. If 2 Quarters and a Nickel fit snug, then you need a .203" Bolt. Includes Tactical Lever, Bolt and spare adjustment nut.
Get Tactical
A quicker release, smoother movement and a sturdier design make this the best upgrade for any ADM mount. Upgrade your existing standard lever to the new Tactical Lever.
AD-TacLeverUpgrade (for each unit assembly, some ADM mounts will require 2 assemblies)
AD-TacLeverUpgrade
Col
ors Retail
$2200
12 13
Trijicon TA11H-G ACOG paired with an American Defense AD-B3-HD Mount.
AD-Recon 30mm mount paired with a Vortex Viper 1−4x PST Scope. Features Capped Turrets and TMCQ MOA Reticle.
AD-Recon-X 30mm mount paired with a Vortex Strike Eagle 1−6x Scope. Features the AR-BDC Reticle.
Col
ors Retail
$147415AD-TA11HG-HD-PKG
Col
ors Retail
$56696AD-VIPERPSTMOA-PKG
Col
ors Retail
$42995AD-STRIKEEAGLE-PKG
OPTIC MOUNT: COMBOS
American Defense AD-T1−10 Mount paired with an Aimpoint T2 Red Dot. This is a one piece Mount that will Absolute Co-Witness with standard AR-15 height Iron Sights.
Trijicon Miniature Rifle Optic paired with an American Defense AD-MRO Absolute Co-Witness Mount.
American Defense AD-68 Mount paired with an Aimpoint PRO Optic. This Mount will Absolute Co-Witness with standard AR-15 height Iron Sights.
Col
ors Retail
$82845AD-T2-10-PKG
Col
ors Retail
$49300AD-MRO-CO-PKG
Col
ors Retail
$51476AD-PRO-PKG-S
14 15
AD-SM-01 Shown
Magnifier Swing Off Mounts The AD-SM-01/AD-SM-02
features an absolute lower third or co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights. It enables the operator to flip the magnifier out of view for an un-magnified sight picture. It is configurable for a right or left direction of flip. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
AD-SM-01 1.69" from top of rail to centerline (lower 1⁄3rd)
AD-SM-02 1.52" from top of rail to centerline (co-witness)
AD-SM-XX-HR Hinge Release Series (Specify Height XX as 01, 02, or 03.)
HR Series, Hinge Open
HR Series, Hinge Closed
FEATURED PRODUCT: THE SWING MOUNT SYSTEM
AD-SM-01
Col
ors Retail
$14500Retail
$13500AD-SM-02 AD-SM-XX-HR
OPTIC MOUNTS: AIMPOINT MOUNTS
A
With a 30mm ring: AD-68 A=1.52"AD-68C A=1.69"AD-68L A=1.10"AD-68H A=1.69"
With a 35mm ring: AD-68 A=1.66"AD-68C A=1.83"AD-68L A=1.24"AD-68H A=1.83"
A = Centerline to top of rail
SPECS
OPTIC MOUNTS: AIMPOINT MOUNT SPECS
The AD-68C Cantilever Aimpoint Mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights.
Col
ors Retail
$13995AD-68-C
The AD-68H High Profile Aimpoint Mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights.
Col
ors Retail
$10995AD-68H-XX
The AD-68 Standard Height Aimpoint Mount features an absolute co-witness (co-witness near center of optic) when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights.
Col
ors Retail
$10995AD-68-XX
The AD-68L Low Profile Aimpoint Mount was designed for 30mm tube optics that require the absolute lowest mounting height possible.
Col
ors Retail
$10995AD-68L-XX
16 17
DOUBLE-LOCK OPTIC MOUNTS: RECON SCOPE MOUNTS
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief.
† U.S. Patent No. 7,823,316
Retail$18995
Col
ors
Col
ors
Col
ors
Col
ors
AD-RECON-30 MOA
AD-RECON-H
AD-RECON
AD-RECON-X
AD-RECON-20 MOA
The AD-RECON-20/30 mount, similar to the AD-RECON, this mount features added elevation adjustment built in to the base. Available in 20 or 30 MOA, this extra adjustment is great for long range shooting. The cantilever throws the scope out front, allowing you to get the right eye relief.
20MOA
20MOA
30MOA
Retail$19595
The AD-RECON-H mount, similar to the AD-RECON, is 1.93" above the rail in order to get riflescopes up above top-mounted laser/ illuminators like PEQ-2’s and PEQ-4’s.
Retail$19595
The AD-RECON-X mount, similar to the AD-RECON, is made for putting high power glass onto a flattop style AR-15. The cantilever on the AD-RECON-X provides extended eye relief over the AD-RECON model.
Retail$19995
The AD-RECON-SW mount, similar to the AD-RECON-S, is a straight-up mount with no forward offset. The rings are spaced farther apart to fit long tube scopes such as the Schmidt & Bender scopes, and US Optics TPAL Scopes. Also available in 20 MOA.
AD-RECON-SW AD-RECON-SW-20 MOA
Col
ors Retail
$18595Retail
$17595
20MOA
The AD-RECON-S mount, similar to the AD-RECON, is made for putting high power glass onto a flattop style AR-15. The AD-RECON-S is a straight up scope mount with no eye relief built in. Also available in 20 MOA and 40 MOA.
AD-RECON-S AD-RECON-S-20 MOA AD-RECON-S-40 MOA
Col
ors Retail
$17995Retail
$16995
30MOA
40MOA
20MOA
The AD-RECON-SL mount, similar to the AD-RECON-S, is the lowest RECON-style mount that we offer. The AD-RECON-SL is a straight up scope mount with no eye relief built in. Also available in 20 MOA and 30 MOA.
AD-RECON-SL AD-RECON-SL-20 MOA AD-RECON-SL-30 MOA
Col
ors Retail
$17995Retail
$16995
20MOA
30MOA
The AD-RECON-PB* mount, similar to the AD-RECON, is made for the Valdada QR-TS PITBULL 35mm Tactical Compact Scope, and the Burris Timberline Riflescope. Also available in H mount. Also fits Nikon P223 3x32.
AD-RECON-PB AD-RECON-PBH
*RECON-PB available in:
Col
ors Retail
$18995
30mm
1inch
34mm
35mm
18 19
DELTA OPTIC MOUNT
SINGLE-LOCK OPTIC MOUNTS: SCOUT SCOPE MOUNTS
The AD-SCOUT mount is made for putting high power glass onto a flattop style AR-15 or scout type rifle. The cantilever throws the scope out front, allowing you to get the correct eye relief.
AD-SCOUT-X
Col
ors Retail
$16495
The AD-DELTA-C mount is made for putting high power glass onto a flattop style AR-15. The AD-DELTA-C is a cantilever scope mount with 2" of eye relief built in.
AD-DELTA-C
Col
ors Retail
$23995
The AD-SCOUT-S mount is made for putting high power glass onto a flattop style AR-15 or scout type rifle. The AD-SCOUT-S is a straight up scope mount with no eye relief built in.
AD-SCOUT-S
Col
ors Retail
$14995
The AD-SCOUT-X mount is made for putting high power glass onto a flattop style AR-15 or scout type rifle. The cantilever throws the scope out front, allowing you to get the right eye relief.
AD-SCOUT-X
Col
ors Retail
$17995
30mm
1inch
32mm
34mm
35mm
40mm
The AD-DELTA mount is made for putting high power glass onto a FN SCAR or flattop style AR-10. Horizontal rings. Adapted to the FN SCAR program; approved by SOCOM.
AD-DELTAAD-DELTA-20 MOA
Col
ors Retail
$23495Retail
$22495
30mm
1inch
34mm
35mm
only available in 30mm ring size. (Not available in FDE.)
20MOA
36mm
ITEM A (1") A(30mm) A(32mm) A(34mm) A(35mm) A(40mm) B C D E F
AD-DELTA 1.475" 1.500" — — — — 5.375" 3.385" 2.85" .000" .980"
AD-RECON 1.380" 1.470" 1.510" 1.550" 1.570" 1.668" 4.48" 2.52" 1.45" 1.93" .980"
AD-RECON-X 1.380" 1.470" 1.510" 1.550" 1.570" 1.668" 4.15" 2.20" 2.85" 3.00" .980"
AD-RECON-PB 1.380" 1.470" 1.510" 1.550" 1.570" 1.668" 3.53" 1.75" .900" .000" .800" *
AD-RECON-PBH 1.880" 1.970" 2.010" 2.050" 2.070" 2.168" 3.53" 1.75" .900" .000" .800" *
AD-RECON-H 1.840" 1.930" 1.970" 2.010" 2.030" 2.128" 4.48" 2.52" 1.45" 1.93" .980"
AD-RECON-S 1.380" 1.470" 1.510" 1.550" 1.570" 1.668" 4.48" 2.52" — .240" .980"
AD-RECON-SW 1.380" 1.470" 1.510" 1.550" 1.570" 1.668" 5.20" 3.25" — .600" .980"
AD-RECON-SL 1.020" 1.110" 1.150" 1.190" 1.210" 1.308" 4.48" 2.52" — .000" .980"
* The AD-RECON-PB and AD-RECON-PBH Front Rings have a length of .980"
D C
E
B
A
E
B
C
A
FR
ON
TF
RO
NT
F F
F F
AD-RECON
AD-RECON-X
AD-RECON-PB
AD-RECON-H
AD-RECON-S
AD-RECON-SW
AD-RECON-SL
A = Centerline to top of rail
SPECS
OPTIC MOUNTS: SCOPE MOUNT SPECS
30mm
34mm
34mm
20 21
RING SETS & QD KITS
The AD-HD7 QDKit for Lucid HD7 Optics. Includes 1 large clamp, 2 small clamps, 2 throw levers with nuts and 3 springs.
AD-HD7 QD kit
Col
ors Retail
$9500
At the request of our customers, we are now offering alternate ring sizes to accommodate the ever growing variety of popular scopes on the market. Rings are priced and sold in pairs.
All Ring Sets
Col
ors Retail
$6495
30mm
1inch
32mm
34mm
35mm
36mm
40mm
AD-SRS-30 Steel Scope Rings The 30mm Steel Scope Rings are low height rings at just .86" over the rail to centerline and are precision machined from 4140 steel. The 30mm Steel Scope Rings are sold in pairs.
The 30mm Steel Scope Rings have the following features:• Low Height • Centerline Height is .86" from the Rail • Weight: 8.4oz
AD-SRS-30
Col
ors Retail
$14000
30mm
for Lucid HD7
AD-CM4-11Lower 1/3 height
AD-CM4-LSLowest height
The AD-CM4-regular base replacement mount for the CM4 and CM4S optic.
The AD-CM4-LS is the lowest mount for the M4S Optic.
Col
ors
Col
ors
Retail$8350
Retail$7995
Retail$8150
Retail$7995
AD-CM4-LLowest height
AD-CM4-10Co-witness height
The AD-45 Mount is a 45˚ offset mount that can be used in any type of configuration that is needed.
AD-45-6R (6" Rail)
3" rail shown.
Col
ors Retail
$12000Retail
$11000Retail
$10500AD-45-2R
(2" Rail)AD-45-3R
(3" Rail)
AD-VRD-11 baseLower 1/3 heightC
olor
s Retail$2450
Retail$2250
Retail$7495
AD-VRDStandard base
AD-VRD-10 baseCo-witness height
The AD-VRD regular base is the base platform for the VORTEX RAZOR Red Dot. This base is a direct replacement for the stock mount, but gives you the quick detatch you need.
AD-CRD-11 baseLower 1/3 heightC
olor
s Retail$2450
Retail$2250
Retail$7495
AD-CRDStandard base
AD-CRD-10 baseCo-witness height
The AD-CRD regular base is the direct replacement for the stock mount on the C-More STS Red Dot sight.
AD-SPITFIRE-1X
Col
ors Retail
$7950
The AD-SPITFIRE-1X Mount is a replacement Quick Disconnect mount for the Vortex Spitfire 1x Optic. The mount is compatible with the factory spacer.
AD-SPITFIRE-3X
Col
ors Retail
$7995
The AD-SPITFIRE-3X Mount is a replacement Quick Disconnect mount for the Vortex Spitfire 3x Optic. The mount is compatible with the factory spacer.
SPECIALTY MOUNTS & BASES
22 23
The AD-22 mount was designed to mount the FastFire RedDot to the Picatinny rail system. The optic sits as low as it gets.
* Also fits the Docter red dot sight
The AD-IM Mini mount was designed to mount the Insight MRDS Optic to a Picatinny rail mount system. The mount uses the original screws and gives you the option of QD.
MINI BASES
The AD-TR Mini mount was designed to fit the Trijicon RedDot™ and Leupold Delta Point to a Picatinny rail system. Our QD attachment gives you the option of quick setup and change over.
AD-TR Mini-11 plate Lower 1/3 heightC
olor
s Retail$2450
Retail$2250
Retail$7550
AD-TR Mini Standard base
AD-TR Mini-10 plate Co-witness height
AD-IM Mini-11 plate Lower 1/3 heightC
olor
s Retail$2450
Retail$2250
Retail$7800
AD-IM Mini Standard base
AD-IM Mini-10 plate Co-witness height
AD-22-11 plate Lower 1/3 heightC
olor
s Retail$2450
Retail$2250
Retail$7495
AD-22 Standard base
AD-22-10 plate Co-witness height
The AD-20 Mini mount was made for the QD attachment of the Leupold Prismatic to a Picatinny rail mount system. This mount uses the original screws and risers for the different heights.
AD-20 Mini
Col
ors Retail
$7495
The AD-RMR Mini is a low mount designed for Trijicon RMR to fit a Picatinny rail mount system. With the QD attachment, this mount provides the freedom to change over for the next mission.
* Available in right-hand and left-hand models.
FDE right-hand model only. AD-RMR-LH AD-RMR-RH
Col
ors Retail
$7550
The AD-RMR-MID mini mount was designed to mount the Trijicon RMR to a Picatinny rail and provide an absolute co-witness iron sight picture when used in conjunction with Troy Battlesights.
AD-RMR-MID
Col
ors Retail
$7825
The AD-RMR CO is a low mount designed for Trijicon RMR to fit a Picatinny rail mount system, available in co-witness height.
*Also Available in lower 1/3 optic height position
The AD-MOB (Modular Offset Base) is available for both the Aimpoint T1/H1 and the Trijicon RMR Red Dots. Bases are available in both Right Hand or Left Hand configurations, as well as 33* or 45* offsets.
* left-hand model only
AD-RMR CO
AD-MOB
Col
ors
Col
ors
Retail$7825
Retail$12995
24 25
All of the American Defense B2 series bases are a PERFECT FIT for the Trijicon ACOG sights.
The AD-B4 modular base* is the largest base in our modular lineup. Standalone it is a full-size ACOG mount. Alternatively it can accept several different risers to accommodate a variety of uses.
4" Overall Length of Mount
* For ACOG 5x and 6x
AD-B4
Col
ors Retail
$8495
The AD-B3 modular base* is another medium base in our modular lineup. Standalone it is a full-size ACOG mount. Alternatively it can accept several different risers to accommodate a variety of uses.
3.6" Overall Length of Mount
* For ACOG 3x and 4x
AD-B3
Col
ors Retail
$7995
AD-B3-HD
Col
ors Retail
$9995
The AD-B1 modular base is the smallest base in our modular lineup. It is designed to accept several different risers to accommodate a variety of uses.
1.3" Overall Length of Mount
AD-B1
Col
ors Retail
$7500
The AD-B2 modular base* is the medium base in our modular lineup. It is designed to accept several different risers to accommodate a variety of optics. With no risers installed, it is the ideal base for the mini ACOG.
2.15" Overall Length of Mount
* For ACOG 1x and 2x
AD-B2
Col
ors Retail
$7500
MODULAR BASES: B-SERIES
The AD-B3-HD modular base is a new medium base in our modular lineup. With the added security of two QD Auto Lock throw levers it is a full-size mount for the ACOG and VCOG optics from Trijicon. Alternatively it can accept several different risers to accommodate a variety of uses.
The B2-T1CO and B2-T1SOCOM Riser is designed to interface with the B2 modular base is configured for the Aimpoint Micro T-1. The B2-T1SOCOM It will put the iron sights in the lower one third of the optic.
The B2-CM4SOCOM Riser is designed to interface with the B2 modular base is configured for the Aimpoint Comp M4. It will put the iron sights in the lower third of the optic.
The B2-CM4CO Riser is designed to interface with the B2 modular base is configured for the Aimpoint Comp M4. It will put the iron sights at the true co-witness height.
B2-T1CO Riser and B2-T1SOCOM Riser
Position Weight - 1/3 1.7 oz. Co-Witness 1.8 oz. + 1/3 1.9 oz.
B2-CM4SOCOM Riser Position Weight - 1/3 1.7 oz. Co-Witness 1.8 oz. + 1/3 1.9 oz.
B2-CM4CO Riser Position Weight - 1/3 1.7 oz. Co-Witness 1.8 oz. + 1/3 1.9 oz.
B2-CM4CO
Col
ors Retail
$3495
B2-CM4SOCOM
Col
ors Retail
$3495
B2-T1CO B2-T1SOCOM
Col
ors Retail
$2250
The B2 6mm Riser gives you a 6 mm rise for the ACOG for lower 1/3 height.
Shown on AD-B2
AD-B2-6MM
Col
ors Retail
$1825
26 27
The AD-T1-L Base is for the AIMPOINT T1 MICRO optic. It is the lowest mount for the optic.
AD-T1-L
Col
ors Retail
$7450
The AD-T1-CASV Base is for the AIMPOINT T1 MICRO optic and is used with the VLTOR “CASV” system to be co-witness.
AD-T1-CASV
Col
ors Retail
$8495
The AD-T1-10 Base is for the AIMPOINT T1 MICRO optic to be co-witness.* The AD-T1-11 Base is
available for lower 1/3 of the optic height position.
AD-T1-10/11
Col
ors Retail
$9200
The AD-MRO-L is the lowest mount for the Trijicon MRO optic.
AD-MRO-L
Col
ors Retail
$8450
The AD-MRO-10 is the Absolute Cowitness mount for the Trijicon MRO Optic.
AD-MRO-10/11
Col
ors Retail
$9200
Quick Detach mount for the Trijicon SRS Optic. Centerline height is 1.69.
AD-SRSMOUNT
Col
ors Retail
$10500
AIMPOINT/TRIJICON BASES
Our company was
founded with an
idea and hard work.
What developed was
the QD Auto Lock
System. All American
Defense MFG products
are 100 percent
designed and
built in the U.S.A.
Our products are
designed by shooters
with one goal:
Customer Satisfaction.
* The AD-MRO-11 is the lower 1/3 Co-witness mount for the Trijicon MRO. optic
28 29
SPECIALTY BASES & MOUNTS: BIPODS
The AD-170S Mount is a shorter version that provides the same mounting solution you need for any MIL-STD 1913 Picatinny rail.* Also used on Atlas BiPod.
AD-170S
Col
ors Retail
$6995
The AD-170 Mount provides a platform for any type of mounting solution you may need for the MIL-STD 1913 Picatinny rail.
* Also Fits the Surefire M952 Milennium Weaponlight
AD-170
Col
ors Retail
$7395
The AD-1700 Mount provides a platform for any type of mounting solution you may need to any length MIL-STD 1913 Picatinny rail.
AD-1700
Col
ors Retail
$9300
The AD-BP Mount has made the Harris bipod mount even better now with QD capability to move quickly from one gun to another. This product was adopted by the SCAR program.
AD-BP
Col
ors Retail
$7150
The AD-BP-P2 Harris Swivel Bipod Mount enables you to attach a Harris or similar Swivel Bipod to your railed forearm.
AD-BP
Col
ors Retail
$7150
The AD-25 Mount is for the TANGODOWN bipod. It makes the bipod easy to move from one gun to another and lessens the amount of equipment needed to carry on a mission.
AD-25
Col
ors Retail
$8700
The AD-190 Mount is for the GGG Bipod. This mount was made for an ADM Quick-detatch mount to be added to the GGG Bipod.
AD-190
Col
ors Retail
$7395
SPECIALTY BASES & NV MOUNTS
The AD-15-R is a low mount for the Trijicon Reflex sight. This combination of mount and the Reflex sight provides any shooter with a superb, accurate sighting system.
The AD-PVS-14 Mount was designed for mounting the PVS-14 night vision monocular in the perfect position behind the optic.
The AD-180 Base is for the C-More RW, CRW, ARW, TRW, CTRW AND ATRW models. This is a direct replacement product.
AD-180
Col
ors Retail
$7395
AD-PVS-14
Col
ors Retail
$12995
AD-15-R
Col
ors Retail
$11995
The AD-170-VPG provides a QD solution for a picatinny rail, offering a .60" rise above the mounting surface with an overall length of 2.3". It accepts all VPG bolt on rails that come in both 3 lug and 5 lug variations.
AD-170-VPG
Col
ors Retail
$9200
Available in both 3-Lug and 5-Lug configurations.
AD-VPG Rails fit to the AD-170 or any other competitors mounts similar to this with the same bolt pattern and gives you a QD mount solution.
AD-VPG
Col
ors Retail
$1895
The AD-SF with SF Rail is the perfect mounting solution for small red dot sights such as the Bushnell TRS-25. The mount is 1.35" long and sits .48" above the rail.
AD-SF
Col
ors Retail
$7000
30 31
RISERS & GRIPS: EOTECH AND TANGO DOWN
The AD-ETECH-R2 Riser fits the new QD EOTECH models such as the EXPS3.
The AD-ETECH-R Riser gives you all the features of the American Defense auto lock system for your EOTECH. It raises the height of the optic .250 placing the iron sights in the lower one third. It also includes a built in small section of rail at the rear for NV or a magnifying optic.
AD-ETECH-R2
Col
ors Retail
$10995AD-ETECH-RRetail
$10995
Tango Down Quick Detach Vertical Grips
After years of searching for the ultimate Quick Detach method for our vertical grips, TangoDown has teamed with American Defense to bring you the best vertical grip yet.
BGV-QDSF and BGV-QDITI models available.
BGV-QDK Stub Grip also available.
BGV-QDSF
Col
ors Retail
$8750
LASER & FLASHLIGHT MOUNTS
The SMQ-OCG VLTOR Mount. American Defense Products are so reliable that VLTOR has adapted our QD Auto Lock System for mounting flashlights or lasers.
SMQ-OCG VLTOR
Col
ors Retail
$8495
The AD-LL mount was designed to mount the Lens Light K.O. Weapon Mount Light.
AD-LL
Col
ors Retail
$6695
The AD-21 Mini mount was designed to mount the SureFire™ Helmet Light to a Picatinny rail mount system. The mount uses the original screws and gives you a QD option.
AD-21 Mini
Col
ors Retail
$7800
The AD-175 mount is specifically designed to fit the D-BAL laser.
AD-175
Col
ors Retail
$7695
AD-SF
Col
ors Retail
$6695
The AD-SF mount was designed for mounting the Surefire M600B/M300A Scout Light®.
AD-PAK Base. This mount replaces the USGI mount, keeps the same height and will not loosen up.
AD-PAK
Col
ors Retail
$7350
32
back
DEALERS IN YOUR AREAFor a list of authorized American Defense MFG dealers located in your state of residence, go to our website at: adm-mfg.com and click the “Dealer Locator” to display a list of locations nearest you. If, for whatever reason, you cannot locate a dealer in your area, our customer service department is always ready to personally assist you at: (262) 780-9831.
WEARABLES AND SWAG
American Defense Black Logoed T-Shirt.
American Defense MFG Logo PVC Patch Package. Features a Velcro backing so it can be stuck on your range bag, gear bag or hat! Size is 2" x 2".
Package includes 3 patches, one of each color.
Col
ors Retail
$2500
Retail$600
American Defense Black Sniper Rifle T-Shirt.
American Defense pink t-shirt.
Col
ors
Col
orsRetail
$2500Retail$2500
Retail$2500
Retail$2500
Flexfit hat available in black or tan. Size: S/M or L/XL
26oz Aluminum Water Bottle featuring the American Defense MFG Logo. Screw-on lid with Food grade internal liner. Includes matching carabiner. BPA free.
Col
ors
Col
ors
Retail$2000
Retail$1000
American Defense Tan M4 Rifle T-Shirt.
Col
ors
American Defense Ranger As F*ck T-shirt. Features a reversed American Flag on the right sleeve.
front
Col
ors
SERVICE DISCOUNT As a token of our appreciation to the brave men and women who serve our country, we offer a special discount program for Law Enforcement and Active Military Personnel.
In order to be considered for our discount program, you need to first register an account on our website. Once you have registered, send us an email with your credentials and your username. Once we verify your credentials, we will move your account into our LE/MIL pricing group. You will be notified by email when your account has been updated. Once you receive your notification you are free to order through the website at your discounted price. You must be logged in to see and purchase at your discounted price.
1. Register an account on our website
2. Email credentials to [email protected]
3. You will be notified by email once your account has been updated.
4. Order through our website at your new discounted pricing.
Disclaimer: Although we supplement our product line with products from other manufacturers, our discounts apply only to products manufactured by American Defense MFG. Occasionally we may offer discounts on non American Defense MFG products, however, this is on a case by case basis where pricing margins permit.
The retail prices shown in this catalog are subject to change without notice. Call us at 262.780.9831 or check our website: adm-mfg.com for current pricing.
Beware of foreign-made knockoffs of our product!
Recently, American Defense MFG has become aware of
illegal foreign-made substandard copies of
our products being sold as originals. Make sure your American Defense
MFG products are genuine, order from our
approved dealers by visiting our website
and locating the dealer nearest you.
All American Defense MFG,
products feature a Lifetime Warranty.
If you break it under normal
operating conditions we will replace it.
PERIOD.
OUR WARRANTY
AD-SRS AD-PS
AD-TS-RAF AD-FF: Hat
AD-WB
AD-M4SAD-TS: LOGO
AD-Patch-PKG
PNK
GRY
American Defense MFG 2525 S. 162nd Street, New Berlin, WI 53151
Phone: 262.780.9831 Fax: 262.754.0660
Sales inquiries, call or email: [email protected]
adm-mfg.com