contrinex fiber optic solutions
TRANSCRIPT
FIBER-OPTIC SOLUTIONS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
FIBER-OPTIC SOLUTIONSOptical fibers are fitted in front of the emitter and receiver (the basic operation is identical for both glass and synthetic optical fibers). These fibers work as the extended “eye” of the photo sensor. As optical fiber conductors are very small and flexible, they provide a truly practical solution to the problem of sensing in highly inaccessible places. Furthermore, they do not carry any electrical potential, and sensing operations are therefore possible without special safety measures, even in areas where there is an explosion risk, or in the presence of strong electrical and magnetic fields (high-voltage equipment, electrical welding equipment). Even the tiniest objects can be detected by using appropriately thin fibers. Optical fibers can act as both through-beam (Fig. 1) and diffuse sensors (Fig. 2).
FIBER-OPTIC AMPLIFIERS
SERIES 3030 / 3031They combine high performance (series 3030), good performance and moderate cost (series 3031) with reduced dimensions (30 x 30 x 15 mm housing). They are intended for general use, particularly where small size is required. Despite their size, they feature all the usual protection functions, are robust and can be used for demanding industrial applications.
SERIES 3060 / 3065 / 3066These fiber-optic amplifiers for DIN-rail mounting (DIN/EN 50022) feature large sensing ranges, out-standing detection properties for both long and very short operating distances, high temperature stability and durability, thanks to stabilized light power (teach-in models only), and high switching frequency. For the teach-in versions, built-in adjustable pulse delay and stretching are standard. The exceptionally small housing (30 x 60 x 10 mm) allows for optimum stacking of even a large number of switches. In addition, the devices are optimized for simple and easily understandable operation. Presently, the series offers distance setting by means of potentiometer and teach-in; the latter with additional manual fine adjustment. According to choice, Teach 1 (only on background), Teach 2 (first on target, then on background), or Dynamic Teach may be used. The teach process can also be launched from a distance via a separate input.
Fig. 1 Fig. 2
INTRODUCTION
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
SyNThETIC OPTICAL FIBERSThis catalog includes a comprehensive range of synthetic optical fibers for the detection of smallest objects, and for use in highly inaccessible places. The fibers can be cut on site to the length required for a specific application.
APPLICATION-SPECIFIC FIBERS− Cylindrical light beam− Background suppression− Multi-beam− Liquid level monitoring− Low and high temperatures
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Small, but robust− Glass window, therefore scratch resistant and easy to clean− Excellent resistance to environmental influences thanks to polyurethane potting of the electronic
module− High degree of protection: IP 67 (series 3030) / IP 65 (series 3031)− Convenient sensitivity adjustment by means of the built-in 12-turn potentiometer
PROTECTIONThe switches are protected against overloads, short-circuits and all possible wire reversals. Fur-thermore, protection against overvoltages caused by inductive loads on the output and against voltage spikes on the power supply lines are built in. Appropriate technology prevents malfunctions or destruction caused by electrostatic discharges, fast transients, or HF fields. Thanks to optimum sealing, the devices are resistant to environmental influences (IP 67 for series 3030 devices / IP 65 for series 3031 devices).
LEDSFor reliable operation the green LED (excess-gain indication) must light up. The yellow LED indicates the output state.
CONNECTIONSwitches with 3 m PVC cable 4 x 0.14 mm2 or 4-pole S8 connector (series 3030) and 2 m PVC cable 3 x 0.14 mm2 or 3-pole S8 connector (series 3031) are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
30x30x15mm Glass-fiberreinforcedPBTP/polybutylene-
terephthalate(Crastin) 10...36VDC 20% 200mAmax. 2.0Vmax.at200mA 1,000Hz 0.5msec
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) IP67(3030)/IP65(3031)
1kV Level2(3030)/3(3031) Level3 Level3
Housingsize Housingmaterial
SupplyvoltagerangeUB
Max.ripplecontent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Max.ambientlight: halogen sun Ambienttemperaturerange Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4
TEChNICAL DATA
FIBER-OPTIC AMPLIFIERSwITh POTENTIOMETER
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
20
M4 4,5 21 4,5
8 22
30
4,5
4,5
21
15
30
822
14
7
[mm]
60
50
40
30
20
10
01020 10 20[mm]
s
a
a
s20
M4 4,5 21 4,5
8 22
30
4,5
4,5
21
15
30
822
14
7
[mm]
120
100
80
60
40
20
02040 20 40[mm]
s
a
a
s
PART REFERENCESPartref.:(bold:preferredtypes)NPNchangeover/cableNPNlight-ON+excessgain/cableNPNchangeover/conn.S84-poleNPNlight-ON+excessgain/S84-p.PNPchangeover/cablePNPlight-ON+excessgain/cablePNPchangeover/conn.S84-polePNPlight-ON+excessgain/S84-p.Wiring(page23)
Partref.:(bold:preferredtypes)NPNlight-ON/cableNPNdark-ON/cableNPNlight-ON/connectorS83-poleNPNdark-ON/connectorS83-polePNPlight-ON/cablePNPdark-ON/cablePNPlight-ON/connectorS83-polePNPdark-ON/connectorS83-poleWiring(page23)
LFK-3030-101LFK-3030-102LFS-3030-101LFS-3030-102LFK-3030-103LFK-3030-104LFS-3030-103LFS-3030-104
Diagram2
LFK-3031-301LFK-3031-302LFS-3031-301LFS-3031-302LFK-3031-303LFK-3031-304LFS-3031-303LFS-3031-304
Diagram1
Operatingdistance Standardtarget No-loadsupplycurrent Emitter Weight(cable/connectormodel)
TyPE SPECIFIC DATA 60mm(withLFP-1002-020) 100x100mmwhite 15mA(typical) LEDred660nm 78g/18g
STANDARD 120mm(withLFP-1002-020) 100x100mmwhite 20mA(typical) LEDred660nm 78g/17g
hIgh PERFORMANCE TyPE SPECIFIC DATA Operatingdistance Standardtarget No-loadsupplycurrent Emitter Weight(cable/connectormodel)
Response curve:
SERIES 3031/3030 60 mm 120 mm
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Fiber-optic amplifiers for DIN-rail mounting (DIN/EN 50022)− Ideal for stacking, thanks to 10 mm housing width− Large sensing range of 0 ... 200 mm (red light) / 0 ... 100 mm (blue light) / 0 ... 140 mm (high
switching frequency)− No blind zone− Distance setting by means of 12-turn potentiometer with illuminated scale− Large setting range of 20 ... 200 mm (red light) / 20 ... 100 mm (blue light) / 20 ... 140 mm (high
switching frequency)− Switch selectable light-ON / dark-ON output, as well as excess-gain output− Fibers (∅ 2.2 mm) connected by quick-locking− Operating and display elements protected by transparent cover
PROTECTIONThe switches are protected against overloads, short-circuits and all possible wire reversals. Fur-thermore, protection against overvoltages caused by inductive loads on the output and against voltage spikes on the power supply lines are built in. Appropriate technology prevents malfunctions or destruction caused by electrostatic discharges, fast transients, or HF fields. Thanks to optimum sealing, the devices are resistant to environmental influences (IP 64).
LEDSFor reliable operation the green LED (excess-gain indication) must light up. The yellow LED indicates the output state.
CONNECTIONDevices with 2 m PVC cable 4 x 0.25 mm2 or 4-pole S8 connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TEChNICAL DATA
31x60x10mm Glass-fiberreinforcedPBTP/polybutylene-
terephthalate(Crastin) 10...30VDC 20% 200mAmax. 2.0Vmax.at200mA 1,500Hz/5,000Hz(highfrequency) 330µsec/100µsec(highfrequency)
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) IP64
5kV Level2 Level3 Level2
Housingsize Housingmaterial
SupplyvoltagerangeUB
Max.ripplecontent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Max.ambientlight: halogen sun Ambienttemperaturerange Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4
FIBER-OPTIC AMPLIFIERSwITh POTENTIOMETER
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
60 40 20 0 40 60[mm]
50
100
150
200
20
[mm]s
a
a
s
60 40 20 0 40 60[mm]
50
100
150
200
20
[mm] s
a
a
s
PART REFERENCES
LFK-3260-101
LFS-3260-101
LFK-3260-103
LFS-3260-103
Diagram2
Partref.:(bold:preferredtypes)NPNpotentiometer/cableNPNpotentiometer/conn.S84-polePNPpotentiometer/cablePNPpotentiometer/conn.S84-poleWiring(page23)
LFK-3360-101
LFS-3360-101
LFK-3360-103
LFS-3360-103
Diagram2
LFK-3060-101
LFS-3060-101
LFK-3060-103
LFS-3060-103
Diagram2
Response curve:
TyPE SPECIFIC DATA STANDARD BLUE LIghT hIgh FREqUENCy Operatingdistance Standardtarget No-loadsupplycurrent(atUB=24V) Emitter Weight(cable/connectormodel)
200mm(withLFP-1002-020) 100x100mmwhite 15mA(typical) LEDred680nm 69g/18g
140mm(withLFP-1002-020) 100x100mmwhite 15mA(typical) LEDred680nm 69g/18g
100mm(withLFP-1002-020) 100x100mmwhite 15mA(typical) LEDblue465nm 69g/18g
200 mm 140 mm 100 mmSERIES 3060
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Fiber-optic amplifiers for DIN-rail mounting (DIN/EN 50022)− Ideal for stacking, thanks to 10 mm housing width− Excellent detection properties across a wide sensing range of 0...200 mm (red light) / 0...100 mm
(blue light) / 0...140 mm (high switching frequency)− No blind zone− Distance setting by means of teach-in with additional manual fine adjustment− Large setting range of 20 ... 200 mm (red light) / 20 ... 100 mm (blue light) / 20 ... 140 mm (high
switching frequency)− Regulated emitter light power− Adjustable output switching delay and stretching− Light-ON / dark-ON selectable− Signal-strength and excess-gain indication by means of a bargraph− Fibers (∅ 2.2 mm) connected by quick-locking− Operating and display elements protected by transparent cover
PROTECTIONThe switches are protected against overloads, short-circuits and all possible wire reversals. Fur-thermore, protection against overvoltages caused by inductive loads on the output and against voltage spikes on the power supply lines are built in. Appropriate technology prevents malfunctions or destruction caused by electrostatic discharges, fast transients, or HF fields. Thanks to optimum sealing, the devices are resistant to environmental influences (IP 64).
LEDSA yellow LED indicates the switching state. Signal-strength and excess-gain indication by means of a bargraph allow for optimum alignment of the optical fibers. The status LED shows the output state of the device during the teach process, and 8 green LEDs indicate the activated functions.
CONNECTIONDevices with 2 m PVC cable 4 x 0.25 mm2 or 4-pole S8 connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TEChNICAL DATA 31x60x10mm Glass-fiberreinforcedPBTP/polybutylene-
terephthalate(Crastin) 10...30VDC 20% 200mAmax. 2.0Vmax.at200mA 1,500Hz/5,000Hz(highfrequency) 330µsec/100µsec(highfrequency)
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) IP64
5kV Level2 Level3 Level2
Housingsize Housingmaterial
SupplyvoltagerangeUB
Max.ripplecontent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Max.ambientlight: halogen sun Ambienttemperaturerange Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4
FIBER-OPTIC AMPLIFIERSwITh TEACh-IN
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
60 40 20 0 40 60[mm]
50
100
150
200
20
[mm]s
a
a
s
60 40 20 0 40 60[mm]
50
100
150
200
20
[mm] s
a
a
s
Response curve:
PART REFERENCES
LFK-3265-101
LFS-3265-101
LFK-3265-103
LFS-3265-103
Diagram4
Partref.:(bold:preferredtypes)NPNteach-in/cableNPNteach-in/connectorS84-polePNPteach-in/cablePNPteach-in/connectorS84-poleWiring(page23)
LFK-3365-101
LFS-3365-101
LFK-3365-103
LFS-3365-103
Diagram3
LFK-3065-101
LFS-3065-101
LFK-3065-103
LFS-3065-103
Diagram3
TyPE SPECIFIC DATA STANDARD BLUE LIghT hIgh FREqUENCy Operatingdistance Standardtarget No-loadsupplycurrent(atUB=24V) Emitter Weight(cable/connectormodel)
200mm(withLFP-1002-020) 100x100mmwhite 25mA(typical) LEDred680nm 68g/17g
100mm(withLFP-1002-020) 100x100mmwhite 25mA(typical) LEDblue465nm 68g/17g
140mm(withLFP-1002-020) 100x100mmwhite 25mA(typical) LEDred680nm 68g/17g
200 mm 140 mm 100 mmSERIES 3065
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Fiber-optic amplifiers for DIN-rail mounting (DIN/EN 50022)− Ideal for stacking, thanks to 10 mm housing width− Setting range of 20 ... 200 mm− Distance setting by means of teach-in with additional manual fine adjustment− Teach 1 (background), Teach 2 (target and background), or Dynamic Teach− Signal-strength and treshold indication by means of a LC display− Adjustable output switching delay and stretching− High switching frequency up to 4 kHz− Light-ON / dark-ON selectable− IO-link (PNP version)− Fibers (∅ 2.2 mm) connected by quick-locking− Operating and display elements protected by transparent cover
PROTECTIONThe switches are protected against overloads, short-circuits and all possible wire reversals. Fur-thermore, protection against overvoltages caused by inductive loads on the output and against voltage spikes on the power supply lines are built in. Appropriate technology prevents malfunctions or destruction caused by electrostatic discharges, fast transients, or HF fields. Thanks to optimum sealing, the devices are resistant to environmental influences (IP 64).
LED / LC DISPLAyA yellow LED indicates the switching state. The 8-digit, 14 segment digital LCD indicates the signal strength as well as the switching threshold.
CONNECTIONDevices with 2 m PVC cable 4 x 0.25 mm2 or 4-pole S8 connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TEChNICAL DATA Housingsize Housingmaterial
SupplyvoltagerangeUB
Max.ripplecontent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Max.ambientlight: halogen sun Ambienttemperaturerange Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6
31x60x10mm Glass-fiberreinforcedPBTP/polybutylene-
terephthalate(Crastin) 10...30VDC 20% 200mAmax. 2.0Vmax.at200mA 4,000Hz ≥80µsec
5,000Lux 10,000Lux -5...+55°C(+23...+131°F) IP64
5kV Level2 Level3 Level2 Level2
FIBER-OPTIC AMPLIFIERSwITh DIgITAL DISPLAy
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Display value as a function of the distance Response curve:
PART REFERENCESPartref.:(bold:preferredtypes)
NPNteach-in/cableNPNteach-in/connectorS84-polePNPteach-in&IO-link/cablePNPteach-in&IO-link/S84-poleWiring(page23)
LFK-3066-101
LFS-3066-101
LFK-3066-403
LFS-3066-403
Diagram3
TyPE SPECIFIC DATA DIgITAL DISPLAy Operatingdistance Standardtarget No-loadsupplycurrent(atUB=24V) Emitter Weight(cable/connectormodel)
200mm(withLFP-1002-020) 100x100mmwhite 30mA(typical) LEDred680nm 68g/17g
SERIES 3066 200 mm
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Very small dimensions− Long operating distances− Low bending radii− Can be cut on site− Wide range of types− High degree of protection of the sensing head
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
*LFP-1002-020-002/LFP-2002-020-002**LFP-1108/1109/1011-020
TEChNICAL DATA Ambienttemperaturerange Protectiondegreeofsensinghead Standardlength Fiberbendingradii: miniature/multi-beam standard/coaxial/hightemperature liquidlevelmonitoring flexible/backgroundsuppression luminous Bendingradiusoflight-outlettube Tensileload Fibermaterial Sleevematerial Sensingheadmaterial Sensingheadlight-outlettubematerial Opticalattenuation: standard/luminous miniature flexible coaxial multi-beam Angleofincidence Tighteningtorque: M3 M4 M5 M6 M8
-25...+70°C(-13...+158°F)/-55...+105°C(-67...+221°F)* IP67(IP68forLFP-1010-020) 2m±0.1m(otherlengthsonrequest)
15mm 25mm 25mm 2mm 40mm 25mm 30Nmax. PMMA Polyethylene StainlesssteelV2A/PBTP** StainlesssteelV2A
0.2dB/mmax.at660nm 0.22dB/mmax.at660nm 0.4dB/mmax.at660nm 0.42dB/mmax.at660nm 0.65dB/mmax.at660nm Seedatasheets
1Nm 2Nm 3Nm 4Nm 10Nm
Doublefiber(10m) Nosensinghead Partreference LFP-0005-100 Operatingdistance withseries3030 120mm(2mfiber,diffusesensing) withseries3031 60mm(2mfiber,diffusesensing) withseries3060/65/66 200mm(2mfiber,diffusesensing) Outsidefiber separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Longoperatingdistance
Individualfiber(10m) Nosensinghead Partreference LFP-0004-100 Operatingdistance withseries3030 400mm(2mfiber,through-beamsensing) withseries3031 200mm(2mfiber,through-beamsensing) withseries3060/65/66 700mm(2mfiber,through-beamsensing) Outsidefiber individualfiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Longoperatingdistance
SyNThETIC OPTICAL FIBERS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Housingsize:M� Miniature Partreference LFP-1001-020 Operatingdistance withseries3030 40mm withseries3031 20mm withseries3060/65/66 70mm
Outsidefiber 1separabledoublefiber,∅1mm Innerfiber ∅0.5mm Specialcharacteristics Highestresolution
Part reference (bold: preferred types)
Housingsize:∅2.3 mm Miniature Partreference LFP-1012-020 Operatingdistance withseries3030 40mm withseries3031 20mm withseries3060/65/66 70mm Outsidefiber 1separabledoublefiber,∅1mm Innerfiber ∅0.5mm Specialcharacteristics Highestresolution
Housingsize:M� Miniature Partreference LFP-1004-020 Operatingdistance withseries3030 40mm withseries3031 20mm
withseries3060/65/66 70mmOutsidefiber 1separabledoublefiber,∅1mm
Innerfiber ∅0.5mm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Highestresolution
Housingsize:M� Standard Partreference LFP-1002-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Longoperatingdistance
Housingsize:M� Flexible Partreference LFP-1102-020 Operatingdistance withseries3030 90mm withseries3031 45mm withseries3060/65/66 150mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Verysmallbendingradius
SyNThETIC OPTICAL FIBERSDIFFUSE SENSORS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Housingsize:M� Luminous Partreference LFP-1202-020 Operatingdistance withseries3030 160mm withseries3031 80mm withseries3060/65/66 260mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.5mm Specialcharacteristics Longestoperatingdistance
Housingsize:M� Coaxial Partreference LFP-1003-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Coaxialarrangementoffibers,thusaxiallysymmetricbeam
Housingsize:M� Standard Partreference LFP-1005-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Longoperatingdistance
Housingsize:M� Flexible Partreference LFP-1105-020 Operatingdistance withseries3030 90mm withseries3031 45mm withseries3060/65/66 150mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Verysmallbendingradius
Housingsize:M� Standard Partreference LFP-1013-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Longoperatingdistance
Part reference (bold: preferred types)
SyNThETIC OPTICAL FIBERSDIFFUSE SENSORS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Part reference (bold: preferred types)
Housingsize:M� Miniature Partreference LFP-2001-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅0.5mm Specialcharacteristics Highestresolution
Housingsize:M� Miniature Partreference LFP-2003-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅0.5mm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Highestresolution
Housingsize:∅3.2 mm Standard�0° Partreference LFP-2006-020 Operatingdistance withseries3030 120mm withseries3031 60mm withseries3060/65/66 200mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Lateralsensing
Housingsize:M� Standard Partreference LFP-2002-020 Operatingdistance withseries3030 400mm withseries3031 200mm withseries3060/65/66 700mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Longoperatingdistance
Housingsize:M� Flexible Partreference LFP-2102-020 Operatingdistance withseries3030 300mm withseries3031 150mm withseries3060/65/66 550mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Verysmallbendingradius
SyNThETIC OPTICAL FIBERSThROUgh-BEAM SENSORS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Part reference (bold: preferred types)
Housingsize:M� Luminous Partreference LFP-2202-020 Operatingdistance withseries3030 500mm withseries3031 250mm withseries3060/65/66 900mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.5mm Specialcharacteristics Longestoperatingdistance
Housingsize:M� Standard Partreference LFP-2004-020 Operatingdistance withseries3030 400mm withseries3031 200mm withseries3060/65/66 700mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Longoperatingdistance
Housingsize:M� Flexible Partreference LFP-2104-020 Operatingdistance withseries3030 300mm withseries3031 150mm withseries3060/65/66 500mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Sensingheadwithbendablelight-outlettubeforeaseofpositioning Verysmallbendingradius
Housingsize:M� Standard�0° Partreference LFP-2005-020 Operatingdistance withseries3030 1100mm withseries3031 550mm withseries3060/65/66 1800mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Lateralsensing Longoperatingdistance
SyNThETIC OPTICAL FIBERSThROUgh-BEAM SENSORS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
[mm]
50
60
70
40
30
20
10
01020 10 20[mm]
s
a
a
s
80
90
100[mm]
50
60
70
40
30
20
10
01020 10 20[mm]
s
a
80
90
100
a
s
MAIN FEATURES− Diffuse sensorparticularly suitable for the detection of objects in recesses and behind covers
(through holes and gaps)− Extremely small sensing heads− Quasi-cylindrical light beam− Recessed mounting possible− Sapphire optical parts, thus easy to clean
LFP-1006-020 LFP-1007-020
Part reference (bold: preferred types)
Housingsize:∅4 mm Miniature/sphericaloptics Partreference LFP-1006-020 Operatingdistance withseries3030 100mm withseries3031 60mm withseries3060/65/66 140mm Outsidefiber 1separabledoublefiber,∅1mm Innerfiber ∅0.5mm Specialcharacteristics Sphericalopticsforcylindricallightbeam
Housingsize:M� Miniature/sphericaloptics Partreference LFP-1007-020 Operatingdistance withseries3030 100mm withseries3031 60mm withseries3060/65/66 140mm Outsidefiber 1separabledoublefiber,∅1mm Innerfiber ∅0.5mm Specialcharacteristics Sphericalopticsforcylindricallightbeam
Response curves
Detection through holes and gaps
APPLICATION-SPECIFIC FIBERSCyLINDRICAL LIghT BEAM
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
backgroundtarget
MAIN FEATURES− Diffuse sensor with background suppression− Factory adjusted operating distance of 12 mm− Fully potted optical parts− Recognition of position and thickness differences of only 0.1 mm− Suitable for rough environments, thanks to glass-fiber reinforced PBTP housing− Scratch resistant, easy-to-clean glass lenses
Part reference (bold: preferred types)
Housingsize: ��x�0 Backgroundsuppression/flexible/�0° Partreference LFP-1108-020 Operatingdistance Fixed 12mm Outsidefiber 2separatefibers,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Lateralsensing Detectableheightdifference:0.1mm Minimumdetectabletargetsize:0.15mm2
Minimumdetectablewirediameter:0.1mm
Housingsize: ��x�0 Backgroundsuppression/flexible Partreference LFP-1109-020 Operatingdistance Fixed 12mm Outsidefiber 2separatefibers,∅2.2mm Innerfiber 151x∅75µm Specialcharacteristics Detectableheightdifference:0.1mm Minimumdetectabletargetsize:0.15mm2
Minimumdetectablewirediameter:0.1mm
APPLICATION-SPECIFIC FIBERSBACkgROUND SUPPRESSION
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Multi-beam diffuse sensor− Detection of objects across the whole width of the sensing head (28 mm)− Suitable for rough environments, thanks to PBTP housing− Lateral mounting
MAIN FEATURES− Contact liquid detection (with the exception of white milky liquids)− Fully potted optical parts− Scratch-resistant, easy-to-clean glass prism− Impervious (degree of protection: IP 68)
liquid
air
light
liquid
air
light
Operating principle:
Part reference (bold: preferred types)
Part reference (bold: preferred types)
Housingsize: 1�x�� Multi-beam Partreference LFP-1011-020 Operatingdistance withseries3030 90mm withseries3031 45mm withseries3060/65/66 150mm Outsidefiber 2separatefibers,∅2.2mm Innerfiber 16x∅0.265mm Specialcharacteristics Widedetectionrange
Housingsize:M� Liquidlevelmonitoring Partreference LFP-1010-020 Outsidefiber 2separatefibers,∅2.2mm Innerfiber ∅0.5mm Specialcharacteristics Contactliquiddetection
Response curve:
APPLICATION-SPECIFIC FIBERSMULTI-BEAM
APPLICATION-SPECIFIC FIBERSLIqUID LEvEL MONITORINg
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
MAIN FEATURES− Diffuse (LFP-1002-020-002) and through-beam (LFP-2002-020-002) sensors− Increased temperature range: -55 ... +105 °C (-67 ... +221 °F)− Very small dimensions− Long operating distances− Low bending radii− Can be cut on site
Part reference (bold: preferred types)
Housingsize:M� Low&hightemperatureresistant Partreference LFP-1002-020-002 Operatingdistance withseries3030 90mm withseries3031 45mm withseries3060/65/66 150mm Outsidefiber 1separabledoublefiber,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Increasedtemperaturerangeof-55...+105°C(-67...+221°F)
Housingsize:M� Low&hightemperatureresistant Partreference LFP-2002-020-002 Operatingdistance withseries3030 300mm withseries3031 150mm withseries3060/65/66 550mm Outsidefiber 2individualfibers,∅2.2mm Innerfiber ∅1.0mm Specialcharacteristics Increasedtemperaturerangeof-55...+105°C(-67...+221°F)
APPLICATION-SPECIFIC FIBERSLOw & hIgh TEMPERATURES
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
21 4,5
4,5
21 Ø4,2
Ø4,210o
10o
42
16,533
Ø4,2
8o
8o 15
Ø4,24,5 21 4,5
30
1,5
4,5
37,5
M4 21
41
15
49
21 30
4 ,5
Universalmountingbracket Partreference LXW-3030-000 Material StainlesssteelV2A Canbeusedfor series3030and3031devices
DIN-railmountingbracket Partreference LXW-3030-001 Material StainlesssteelV2A Canbeusedfor series3030and3031devices
Universalmountingbracket Partreference LXW-3060-000 Material StainlesssteelV2A Canbeusedfor series3060,3065and3066devices
ACCESSORIES FORFIBER-OPTIC AMPLIFIERS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
Ø4,5 Ø48,7
5,5M2,6
M2,6
Ø 5 9
6,5
25
Ø3,
5
Ø2 ,
2
Axialfrontlens Partreference LFP-0001-000 Operatingdistance withseries3030 3000mm withseries3031 1500mm withseries3060/65/66 5000mm(5mfibers) Canbeusedwith LFP-2#02-020 Specialcharacteristics 1pair
�0°frontlens Partreference LFP-0002-000 Operatingdistance withseries3030 1000mm withseries3031 500mm withseries3060/65/66 1700mm Canbeusedwith LFP-2#02-020 Specialcharacteristics 1pair
Adaptor Partreference LFP-0003-000 Canbeusedwith finesyntheticopticalfibers
Cuttingtool Partreference LXF-0000-000 Canbeusedwith allsyntheticopticalfibers
Part reference (bold: preferred types)
ACCESSORIES FOR SyNThETIC OPTICAL FIBERS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
NPNlight-ON/dark-ONoutput PNPlight-ON/dark-ONoutput
NPNchangeoveroutputsNPNlight-ON(/dark-ON)+excess-gainoutputs
Diagram2
Diagram1
*pinkforLFK-3#60-10# *pinkforLFK-3#60-10#
PNPchangeoveroutputsPNPlight-ON(/dark-ON)+excess-gainoutputs
brown
black
blue
load
brown
black
blue
load
brown
black
white*
blueload
brown
black
white*
blue
load
Diagram3
NPNlight-ON/dark-ONoutputwithteach-in PNPlight-ON/dark-ONoutputwithteach-in
*whiteforLFS-3#65-10# *whiteforLFS-3#65-10#
(1)
(4)
(2)
(3)
+U
Teach
A
B
R L
39 V39 V
39 V100 k
6V8
47 k47 k
0V
(1)
(4)
(2)
(3)
+U
Teach
A
B
R L
39 V39 V
39 V100 k
6V8
47 k47 k
0V
NPNlight-ON/dark-ONoutputwithteach-in PNPlight-ON/dark-ONoutputwithteach-in
Diagram4
*whiteforLFS-3265-10# *whiteforLFS-3265-10#
brown
black
blue
pink*
load
brown
black
blue
pink*
load
load
brown
black
blue
pink*
brown
black
blue
pink*
load
NPNlight-ON/dark-ONoutputwithteach-in,series3066
brown
black
blue
pink*
load
*whiteforLFS-3066-10#
wIRINg DIAgRAMS FIBER-OPTIC AMPLIFIERS
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]