cookware coatings - ilag€¦ · polymer matrix of its high-level coatings, which do not require...
TRANSCRIPT
COOKWARE Coatings
If it is to be better
2
ILAG‘s non-stick coatings offer a wide range of different
systems. Whether for intensive use in the professional field
or everyday use in the kitchen at home: you can choose
the right coating for every requirement from our thoroughly
differentiated quality levels. We offer a variety of different
solutions for the classic PTFE area as well as for ceramic pans.
Our diversified spectrum of colors and effects, which is
constantly expanding with current trends, is not only inspiring,
but also offers you the opportunity to complement your offer
time and again.
See for yourself! We will gladly advise you and help you find
a suitable coating for you which is tailored to your specific
requirements.
ILAG Cookware Products 3
■ highly recommended
■ after consulting
Coating thickness μm [mils]
Number of layers
Basis
Curing temperature °C [F]
Scratch resistance
Abrasion (BS)
Abrasion (LGA)
Non-stick after abrasion (milk test)
Alu
Cast alu
Stainless steel
Hard base
There are many good non-stick coatings, but some
of them stand out from the crowd with their
outstanding properties. On this page we introduce
you to our most outstanding products.
ILAG is once again setting new standards in terms
of non-stick properties and durability with the revolutionary
polymer matrix of its high-level coatings, which do not
require any ceramic reinforcement in the interlayers.
Our HL products exceeds the professional demands,
for example in the catering industry.
Our best coatings for the highest demands
Highlevel Coatings
4
ILAG coatings applicated in the right way can be used for food contact materials according to the European legislation.■ highly recommended
■ after consulting
DURIT® Ultimate HL Two-coat system, which has a much better non-stick effect due to the use of the new developed polymer matrix in the top coat than comparable products. The innovative HL technology guarantees excellent abrasion resistance and the system is therefore certainly the right choice for “Top Level cookware”.
DURIT® High Level In contrast to today‘s top products, which are reinforced with ceramic particles, the professional DURIT® High Level stands out through a new polymer matrix. Thanks to this innovative technology, the product, which has no ceramic reinforcement in the intermediate layers, comes up with absolute top performance.
35 - 40 [1.38 - 1.57]45 - 55 [1.77 - 2.17]
435 [815]435 [815]
PTFEPTFE
23
■■
■■
■■
■■
✷ ✷ ✷ ✷✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷ s
✷ ✷ ✷ ✷ ✷
➂ ➁ ➀
➀ Top coat with innovative polymer matrix➁ Ceramic reinforced Base coat
for maximum durabilitySpecially prepared substrate
➀ Surface sealing with innovative polymer matrix
➁ Mid coat for extremely high wear resistance
➂ Ceramic reinforced PrimerSpecially prepared substrate
DURIT® Granistone HL Outstanding four-layer non-stick coating without ceramic reinforcement between layers. DURIT® Granistone HL is based on the innovative HL technology with a special polymer matrix. This technology guarantees good non-stick performance and excellent abrasion resistance, even with intensive cooking. Granistone HL captivates the imagination with its high-quality, hard, rough surface. The LGA/TüV mark „Gut“ stands for guaranteed quality.
➀ Top coat applied wet-in-wet➁ Granite effect coating with polymer
matrix, applied wet-in-wet➂ Mid coat with polymer matrix for
optimum abrasion resistance➃ Ceramic reinforced Base coat for
maximum durabilitySpecially prepared substrate
➂➃ ➁ ➀
35 - 45 [1.38 - 1.77]
435 [815]
PTFE
4
■
■
■
■
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
DURIT® Granitec HL Unique four-layer non-stick coating based on DURIT® High Level technology. This coating system meets all the demands placed on a pan. Easy cooking and cleaning, very good scratch resistance and great abrasion resistance are the hallmarks of this product. The elegant granite look with its smooth, hard surface makes a strong state-ment about quality. Granitec HL guarantees sustained cooking pleasure.
➀ Top coat applied wet-in-wet for optimum cleaning performance
➁ Granite effect coating with polymer matrix technology, applied wet-in-wet
➂ Mid coat with innovativ polymer matrix for good scratch resistance
➃ Ceramic reinforced Base coatSpecially prepared substrate
➂➃ ➁ ➀
35 - 45 [1.38 - 1.77]
435 [815]
PTFE
4
■
■
■
■
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
➁ ➀
ILAG Cookware Products 5
Ceramic Coatings
It does not get any better than that: with the perfected
Sol-Gel formula of the new XERADUR® 2, ILAG proves that it
meets even more demanding requests: no cracking with
rapid temperature changes, almost no discoloration and even
significantly improved long-term use properties.
XERA-Dur®, with its sophisticated Xerogel technology,
guarantees exceptional properties such as excellent corrosion
and abrasion resistance, as well as a color range that meets
each and every taste.
The two-coat CERALON® system surprises with its high hardness
and does not develop hazardous decomposition products
even after overheating. The coating also has a very high
temperature resistance.
The ultimate in ceramic non-stick coatings
Coating thickness μm [mils]
Number of layers
Basis
Curing temperature °C [F]
Scratch resistance
Abrasion (BS)
Abrasion (LGA)
Alu
Cast alu
Stainless steel
Hard base
■ highly recommended
■ after consulting
6
CERALON® Two-coat system with very high hardness, which combines very high temperature resistance withgood non-stick and extraordinary cleanability properties. CERALON® does not generate any dangerous thermal decomposition products whenoverheated. The energy consumption during the manufacturing process is lower than for conven-tional coatings due to lower curing temperatures.High hardness, very high temperature resistance, very good abrasion resistance.
➁ ➀
➀ High-quality Sol-Gel Top Coat➁ Ceramic reinforced Sol-Gel Base CoatSandblasted substrate surface
35 - 40 [1.38 - 1.57]
200 [392]
Ceramic (Sol Gel)
2
■
■
■
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
XERA-DUR® Exceptional one coat system, which is cha-racterized primarily by an excellent long-term non-stick effect at chicken test.For improved networking and layer thickness, the following should be carried out: application of the one coat Xerogel system. As soon as the first layer has slightly dried, a second layer is applied upon the first layer (same material).
40 - 50 [1.57 - 1.96]
250 [482]
Ceramic (Sol Gel)
1 - 2
■
■
■
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
➀
➀ Ceramic-reinforced Xerogel layer for long-term non-stick effect , ideally, wet-on-wet, applied in two applications.
Sandblasted substrate surface
XERA-DUR
XERADUR® 2 (multilayer) Two-coat Xerogel-based system with excellent non-stick performance in the chicken and egg test. Thanks to its considerably improved formulation, XERADUR® 2 features no cracking with rapid temperature changes. Additional advantages of this ceramic coating include outstanding abrasion and corrosion resistance.All colors can be applied as one or two-coat system.
35 - 40 [1.38 - 1.57]
280 - 300 [536 - 572]
Ceramic (Sol Gel)
1 - 2
■
■
■
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
➀➁
➀ High quality Xerogel top coat with metallic effect
➁ Ceramic reinforced, improved Xerogel base layer for less cracking
Sandblasted substrate surface
■ highly recommended
■ after consulting
ILAG coatings applicated in the right way can be used for food contact materials according to the European legislation.
ILAG Cookware Products 7
Special Coatings
They are indispensable in the kitchens of this world:
our proven PTFE coatings with ceramic reinforce-
ment! Available in different layer thicknesses and in
three quality levels.
ILAG products are tailor-made and cover the needs of all
users. Whether it‘s an entry-level class, for occasional
cooking or for everyday intensive use – our portfolio offers
the right coating for every household.
They are stable, durable and extremely scratch-resistant,
for cooking and roasting without cling - and even intensive
use can not harm them.
Our proven classics – a must in every kitchen
Coating thickness μm [mils]
Number of layers
Basis
Curing temperature °C [F]
Scratch resistance
Abrasion (BS)
Abrasion (LGA)
Alu
Cast alu
Stainless steel
Hard base
■ highly recommended
■ after consulting
8
■ highly recommended
■ after consulting
DURIT® Select ProA three-layer non-stick coating ceramic reinforced with slight ceramic rein-forcement for intensive use to stand all applications and needs. The scratch resistance was enhanced while maintaining the very good non-stick properties.
➂ ➁ ➀
➀ Highly resistant Top Coat➁ Ceramic reinforced Mid Coat➂ Primer with excellent adhesion
to the substrateSpecially prepared substrate
30 - 40 [1.18 - 1.57]40 - 45 [1.57 - 1.77]
420 [788]420 [788]
PTFEPTFE
33
■■
■■
■■
■■
✷ ✷ ✷ ✷✷ ✷ ✷ ✷
✷ ✷ ✷✷ ✷ ✷ ✷
✷ ✷ ✷✷ ✷ ✷ ✷
DURIT® Dynamic A universal, slightly ceramic reinforced,long-lasting water based three-layernon-stick system, suitable for everyday use where an attractive costperfor-manceratio is important.
➂ ➁ ➀
➀ Resistant Top Coat➁ Lightly ceramic reinforced Mid Coat➂ Primer with optimum adhesion
to the substrateSpecially prepared substrate
30 - 35 [1.18 - 1.38]
420 [788]
PTFE
3
■
■
■
■
✷ ✷ ✷
✷ ✷
✷ ✷
CORFLON® Ultra A universal two-layer non-stick system.In the ULTRA version with enhancedcorrosion resistance. This system isespecially suitable for normal use dueto high endurance and good non-stickproperties.
➀ Resistant Top Coat➁ Primer with excellent adhesion
to the substrateSpecially prepared substrate
20 - 25 [0.79 - 0.98]
420 [788]
PTFE
2
■
■
■
✷ ✷
✷
✷
➁ ➀
ILAG coatings applicated in the right way can be used for food contact materials according to the European legislation.
DURIT® Protect Pro Non-stick system with three layers, ceramic reinforced, for the highest requirements in the cookware area. The very good combination of non-stick effect, scratch resistant and abrasion resistance this product is ideally suited for above-average use in the versatile kitchen.
➂ ➁ ➀
➀ Ceramic reinforced Top Coat➁ Highly ceramic reinforced Mid Coat➂ Highly ceramic reinforced PrimerSpecially prepared substrate
ILAG Cookware Products 9
Specialities
Special applications pose a variety of special
requirements for a non-stick coating. Due to a wide
range of product properties, such as the flexible
number of layers, our products also meet the most
diverse demands in terms of durability, scratch resistance
or corrosion resistance.
The unique, four-layer non-stick coating excites the
professional chefs just as much as the three-layer,
ceramic-reinforced coating. The reinforced multi-layer
Roller Coating System with its high flexibility impresses
in every household.
Our quality products for almost every application
Coating thickness μm [mils]
Number of layers
Basis
Curing temperature °C [F]
Scratch resistance
Abrasion (BS)
Abrasion (LGA)
Alu
Cast alu
Stainless steel
Hard base
■ highly recommended
■ after consulting
10
■ highly recommended
■ after consulting
CORFLON® Concept Reinforced multi-layer roller coating system stands out for high flexibility and adhesion. The good non-stick properties, good abrasion resistance and good stain resistance are other characteristics of this system.
➀ Top Coat for long-lasting non-stick e ect➁ First surface sealing➂ Minimal reinforced Mid Coat➃ Mid Coat, slightly reinforced with ceramics➄ Ceramic reinforced PrimerSpecially prepared substrate
➂➃➄ ➁ ➀
25 - 30 [0.98 - 1.18]
420 [788]
PTFE
5
■
✷ ✷
✷ ✷
✷ ✷
DURIT® Resist Pro A unique, four-layer non-stick coating system. This coating system complies with all require-ments of a professional. The material is highly reinforced based on ceramics, extremely long-lasting with no degradation of non-stick performance, highest scratch resistance and a top corrosion resistance which leaves nothing open to be desired. A coating system for the most intensive and professional use.
➀ Ceramic reinforced Top Coat➁ Highly ceramic reinforced Mid Coat➂ Ceramic reinforced bonding Primer➃ Highly ceramic reinforced Base CoatSpecially prepared substrate
➂➃ ➁ ➀
55 - 65 [2.17 - 2.56]
420 [788]
PTFE
4
■
■
■
■
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
DURIT® Resist A high performance three-layer non-stick coating, with a high degree of ceramic reinforcement. Outstanding durability, excellent abrasion resistance and extraordinary corrosion resistance make this system the best choice for high demanding cooks, and professional chefs.
➀ High-quality Top Coat➁ Extraordinary strong bonding Primer➂ Highly ceramic reinforced Base CoatSpecially prepared substrate
➂ ➁ ➀
50 - 60 [1.97 - 2.36]
420 [788]
PTFE
3
■
■
■
■
✷ ✷ ✷ ✷
✷ ✷ ✷ ✷ ✷
✷ ✷ ✷ ✷
ILAG coatings applicated in the right way can be used for food contact materials according to the European legislation.
ILAG Cookware Products 11
max
med
ia-g
mbh
.de
#400
33/0
2.18
ILAG High Performance Coatings (Shanghai) Co. Ltd.Shanghai (P.R.China)e-mail: [email protected]
Tel.: +86 21 5165 13 82Fax: +86 21 5165 13 89
ILAG USA Inc.St. John, Indiana (USA)e-mail: [email protected]
Tel.: +1 219 713 45 97Fax: +1 219 558 07 38
Industrielack AGWangen (Switzerland)e-mail: [email protected]
Tel.: +41 55 451 29 29Fax: +41 55 451 29 99
ILAG – CHINA
ILAG – HONGKONG
ILAG – IBERIEN
ILAG – INDIEN
ILAG – IRAN
ILAG – JAPAN
ILAG – SÜDKOREA
ILAG – SÜDAMERIKA
ILAG – SÜDOSTASIEN
ILAG – TÜRKEI
ILAG – USA
ILAG – VIETNAM
For detailed information please refer to our website:
www.ilag.ch