cooling towers chiling plants for process industries like
TRANSCRIPT
Quality Certified CompanyQuality Certified Company.
Email: [email protected] or Phone : +91 9833094837
1
Welcome to National Cooling Towers, India
Email: [email protected] or Phone : +91 98330948372
Name of CEO : Mr. S. Chandrashekhar
Establ ishment Year : 1990
Primery Business Type : Manufacturer & Merchant Exporter
No. of Employees : 100-150
Annual Sales : 25 to 30 Billion US Dollars
Market Cover : World Wide Markets mainly India, Africa and Middle East
Products We Offer : Cooling Towers, Chil l ing Plants & Air Blast Coolers
Company Information
Email: [email protected] or Phone : +91 98330948373
Email: [email protected] or Phone : +91 9833094837
4
What is Water Cooling Tower ?In various industries water is used in processing a cooling tower is a heat rejection device, which extracts waste heat to the atmosphere though the cooling of a water stream to a lower temperature. The type of heat rejection in a cooling tower is termed "evaporative" in that it allows the water being cooled max from 90 deg calculus to room temperature 30 to 32 deg calculus
What is Chiller or Chilling Plant ?In various industries water is used in processing Chillers use either a vapor-compression or absorption refrigerant cycle to cool a fluid for heat transfer. Both chiller types rely on three basic principles.
First - When a liquid is heated it vaporizes into a gas, and when a gas is cooled it condenses into a liquidSecond - Lowering the pressure above a liquid reduces its boiling point and increasing the pressure raises itThird - Heat always flows from hot to cold.
Chillers or Chilling Plants are use where you need water temperature below room temperature or from 30 deg calicos till -60 deg calicos
Email: [email protected] or Phone : +91 98330948375
01.01. Power Plant.Power Plant.
02.02. Steel Plant.Steel Plant.
03.03. Chemical & Fertilizer industriesChemical & Fertilizer industries
04.04. Cement Industries.Cement Industries.
05.05. Pharmaceutical IndustriesPharmaceutical Industries
06.06. Machine Building Industries.Machine Building Industries.
07.07. Petroleum IndustriesPetroleum Industries
08.08. Air Condition & Refrigeration Plant.Air Condition & Refrigeration Plant.
09.09. Plastic & Rubber Industries.Plastic & Rubber Industries.
10.10. Automobile Industries.Automobile Industries.
11.11. Induction Furnaces.Induction Furnaces.
12.12. Process Plants.Process Plants.
13.13. Glass Industry.Glass Industry.
14.14. Air Compressions. Air Compressions.
15.15. Oxygen Plants.Oxygen Plants.
16.16. Breweries & Distilleries.Breweries & Distilleries.
17.17. Forgings Industries.Forgings Industries.
18.18. Paper Industries.Paper Industries.
19.19. Textile Industries.Textile Industries.
20.20. Food Processing Industries.Food Processing Industries.
21.21. Sugar Industries.Sugar Industries.
22.22. AnodizingAnodizing
23.23. D.G. Sets D.G. Sets And many more process industries…And many more process industries…
We are supplying to process industries like…We are supplying to process industries like…
National Cooling Tower make FRP Cooling Tower Detail ViewNational Cooling Tower make FRP Cooling Tower Detail View
Approved by…
Email: [email protected] or Phone : +91 98330948376
Approved by…
Email: [email protected] or Phone : +91 98330948377
National Cooling Tower make Air and Water Chil lers Detail ViewNational Cooling Tower make Air and Water Chil lers Detail View
Fig 1. Assembly Diagram:
Warm water from the AHU enters the chiller.
The chiller chilled the water then proceed in CWP unit
CWP unit pumped the chilled water back to the AHU.
The chiller is being cooled by the cooling tower.
Email: [email protected] or Phone : +91 9833094837
8
Product Range Capacity
a) FRP Induced Draught Cooling Towers 03 to 1000 TR
b)Timber Cross Flow & Counter Flow Cooling Towers 25 TR and Above
c) RCC Mechanical & Hyperbol ic Cooling Towers 1000m3 / hr and Above as require
d) Air Cooled Chil l ing Plants 01 TR To 50 TR
e) Water Cooled Chil l ing Plants 03 TR TO 350 TR
f ) Oil Chil lers 01 TR TO 50 TR
g) Air Blast Coolers 5 KW Upwards
h) Industrial Screw Chil lers 50 TR to 500 TR
i ) Mult i Compressor Chil lers ( Tandom Chil ler) 50 TR to 80 TR
j ) Brine Process Cooling System ( Brine Chil ler) 1 TR and Above as require
i ) Screw Compressor Chil ler Above 50 TR
Email: [email protected] or Phone : +91 98330948379
Salient Features :Casing, Basin, Fan deck and Fan stack in corrosion-resistant and fire-retardant FRPHot dip galvanized supporting structural.Fill material of PVC (max. temp. 60 Degree C).High efficient axial flow Fan with Aluminum / FRP blades and cast aluminum alloy hub.Drift eliminators of PVC extruded ‘C’ & ’S’ type (drift percentage shall not exceed 0.05 of circulating water flow).Water distribution system with PVC pipe and PP splash cap (nozzles).Energy efficient - use of high efficient fill, and nozzles with a low pressure drop.Advanced Water Distribution System.Corrosion Protection System.Advanced drive system, including the motor.Durable - use of high quality materials.Guaranteed performance - use of PVC fill.Super Low Sound FanUnique Fan Drive SystemAesthetic looks - use of FRP panels.Easy Field AssemblyQuick Connect Piping SystemDesigned to completely drain the cold water basin.
National Cooling Tower Products – Benefits & Advantages National Cooling Tower Products – Benefits & Advantages
Email: [email protected] or Phone : +91 983309483712
Our Presence in the National and International Market:- Our Presence in the National and International Market:- We have a symbolic presence across the globe in the industry as our supplies of Cooling Towers have touched nearly 30000 and Chil l ing Plants 2000 . Products deployed across the India and globe in high-profile customers. Recommendation from Various Process Industries: Moreover, our expert professionals endeavor to offer an innovative range of designs as per the market trends to lend optimal satisfaction to our clients. National Cooling Tower is strongly committed to these values and seeks to provide customers with a complete and innovative choice of Cooling solut ions for the Plastics, Power, Geothermal, Refining, Petrochemical, Chemical, Pulp & Paper, Steel/Metals , Plastic, HAVC, Power, and many other process industries.Quality Manufactured : We only use the best raw materials and have a quality control system as per CTI- USA, ISO 9001:2008 and CE in place .
Our Products are Approved by:-Our Products are Approved by:-
Email: [email protected] or Phone : +91 9833094837
13
Our Complete Cooling Tower Services
We design, optimize and supply cooling tower with accuracy, reliability and cost effective approach. We manufacture and fabricate most of our structural components. We select the best mechanical equipment & critical components available in the industry. We undertake site supervision, erection, testing & commissioning. Our experience and qualified sales & service staff work in partnership with you to provide technical advice and field service support.
Advice : Our experience in handling livestock will assist you in choosing products to suit your requirements.
Design Service : Our in-house design service makes it easier for you to get it right - give us your ideas and we can help you achieve the best design for you.Cooling System Design and Manufacture and Erection as per your requirement.Supply & Install at your site.Upgrade/Reconstruction advised by our expertise.Reconditioning as per your requirement.Maintenance, repair and operations ( MRO)Performance Testing & Vibration AnalysisInspection and Product Delivery : We can arrange delivery anywhere on time.
Email: [email protected] or Phone : +91 983309483714
Quality Core Services to Our Customers…(A) Design & Engineering
We employ software design programs and CAD techniques in our engineering to provide solutions to meet individual needs. Our technical design ability is kept right on the cutting edge not only with ongoing programs of research & development, but also with continuous evaluation of new design concepts and materials.Our Power Design capabilities exist for the cutting edge not only with ongoing programs of research & development, but also with continuous evaluation of new design concepts and materials.
Our engineering designs cover the fol lowing :
1. Counter flow tower thermal rating program.
2. Cross flow tower thermal rating program.
3. Plume abatement tower thermal rating program.
4. CTI Toolkit for cooling tower performance evaluation, prediction and monitoring.
5. Cooling tower structural analysis program.
Email: [email protected] or Phone : +91 983309483715
(B) Quali ty Control
We carry out inspection of tower components and part according to our QC program.
Tower materials such as wood, steel, fiberglass and plastics will be inspected as per our
quality control procedure. Equipment such as fan assembly, gearbox, motor and drive
shaft will be tested jointly with the manufacturer of each equipment. We assure that items
supplied are in conformance to our engineering standards and contract requirements.
(C) Field Erection
Our erection crews are well-trained and have sufficient knowledge and skills to undertake
erection contracts with full confidence. Prior to physical erection work we will pay special
attention to the erection schedule and establish a critical path. Our supervisor will also
identify all governing regulatory requirements related to construction practices, building
codes, and safely requirements. He will survey the availability of staging space, equipment
availability, manpower strengths and skill level, as well as factors such as prevailing
weather conditions which may affect the erection methods and scheduling.
Email: [email protected] or Phone : +91 983309483716
(f) Maintenance
National Cooling Towers provides maintenance programs for your cooling tower to allow owners, managers, and operators the peace of mind of having cooling tower specialists maintain their cooling towers or closed circuit fluid coolers, allowing their personnel to dedicate time to other pressing matters.
Total or partial maintenance packages are offered. Packages can include the fol lowing features…
• 365 days a year on call emergency standby.• Cleaning of cooling towers, including basins and sumps, either semi-annually or yearly.• Maintenance and lubrication of drive assemblies, whether greasing belt drive fans or gear• Monitoring oil seals for leaking oil.• Verify and maintain proper drive assembly alignment and operation.• Monitor towers, including cold water basins, for leaks.• Up gradation of cooling tower avai labil i ty.• Other routine maintenance as required by individual cooling manufacturers’ specifications and individual owners’ requirements.
Email: [email protected] or Phone : +91 983309483717
Why we are ( Techno Commercial Compliance as per Your Why we are ( Techno Commercial Compliance as per Your Expectations )Expectations )
State-of-the-art infrastructure
1)We are using raw materials that have the appropriate propert ies
and high quality are attractive – and a necessity to ensure that the
end product maintains a high standard and is suitable for its
purpose.
2)38000 + Satisf ied Clients
3)GREEN BUILDING Installations
4)Major Exports in Africa, Middle East and Europe.
5)The demands are high, the problems varied. Our aim? To deliver a
perfect product that meets very exacting specif ications.
6)Cooling System Design as per your requirement.
Next Page…
Email: [email protected] or Phone : +91 9833094837
18
Email: [email protected] or Phone : +91 9833094837 19
7)Cooling Towers are FRP make, having zero maintenance.
8)A close approach
9)Greater thermal eff iciency
10)Higher energy saving
11)Ease of maintenance
12) Lower Drif t Loss
13)Option for Cooling Towers with Centrifugal Fans for Noiseless
Operation
14)Longer working l i fe for fans and motors, since handling dry air
15)Supply & Install at your site.
16)Upgrade/Reconstruction advised by our expert ise.
17)Reconditioning as per your requirement.
18)Maintenance, repair and operations ( MRO)
19)Performance Testing & Vibration Analysis
20)Inspection Support and Training
Email: [email protected] or Phone : +91 983309483720
A) National Induced Draft Counter Flow Cooling Tower:-
A) Other Cross Flow Cooling Tower
In the Induced Draft Counter Flow, always the dry air is in contact with the cool water emerging out from the PVC fills. That means when the air passes through the PVC fills the proper water to air contact occurs and the water evaporate. Thus it loses it heat energy and the moist air is thrown out which will not be re-circulating because the total height of the cooling tower is maintained for the fresh air to flow from the bottom.
It is a known fact that the cross flow cooling towers have the air entry from sides throughout & the distribution pans kept above the heat transfer area from the pan the hot water flow through the holes provided. The first layer of hot water which is falling down get in contact with the fresh dry air. It then extracts heat from the hot water and becomes moist and allows hot water to evaporate. Then hot water loses its heat and is collected in the basin. The second layer of hot water which is also flowing from the pan comes in contact with the same air which is moist and is with higher temperature. The rate of evaporation decreases and the water is not collected to the design outlet temperature because the approach decreases inside the cooling tower which effects the other layers of water & as the air passes inside the efficiency decreases & when the cold water is collected from the basin the temperature of water shall be the mean temperature of all the layers.
Induced Draft Counter Flow Cooling Tower:-The moist air thrown out through the fan stack takes a chance in re-circulating through the air entry sides because of high velocity and the low fan stack height. So always cross flow cooling towers does towers does require higher installed power then counter flow cooling tower. NATIONAL Cooling Tower required 1Ft. to 3Ft. clear space on each side. This results in considerable space saving.
Cross flow cooling tower have air inlet through louvers on sides and the air discharge is on the top. For proper performance of the tower above 6Ft. to 7Ft. clear space is required in front of the fan. For air inlet
Why Counter Flow is always better than Cross Flow. Page 1 based on Practical ( Important points to be consider before buying)
21
There are no louvers in NATIONAL Cooling Towers.
Cross flow cooling tower have louvers. This increase maintenance of the towers and the static pressure drop. Also the louvers are prone to breakage and therefore have to be replaced.
NATIONAL do not have water distribution exposed to the atmosphere.
Cross flow cooling towers have water distribution on top & header type which is exposed to sun. Due to this, chances of algae formation are increased. Also because of the exposed water distribution, dust tends to settle on the top and is circulated with cooling water. The dust and algae tend to depositing in air condenser chiller and compressor jackets, affecting heat transfer whereby discharge pressure will be more effects the performance of the air-conditioning plants.
NATIONAL Cooling Towers have Two inspection cum service windows. Through these windows the water spray and the PVC Fills packs can be observed and corrective action if required can be taken immediately. Through these windows packs can be removed easily for cleaning without disturbing the casing of the tower.
The removal of packs in cross flow cooling tower is very cumbersome & time consuming.
NATIONAL FRP Cooling Tower is very compact and very light weight.
Space requirement for cross flow cooling tower compare to NATIONAL FRP Cooling Tower is more
For National Cooling Towers Service & Maintenance is considerably reduced because fan is the only moving part in the cooling tower. The fills eliminator can easily be approached from the inspection window without disturbing the cooling tower casing. NATIONAL Cooling Towers have totally FRP casing. FRP materials are corrosive proof and does not warp and deteriorate and very compact, height, weight and user friendly by increasing the total efficiency of the systems by ensuring the air flow from all the four sides from the bottom portion and bringing proper contact between water film and air stream.
Why Counter Flow is always better than Cross Flow. Page 2 based on Pract ical ( Important)
Email: [email protected] or Phone : +91 9833094837
Email: [email protected] or Phone : +91 983309483722
Sr. No FRP Induced Draught Counter Flow Cooling Tower
Natural Draught Fan Motor Less Cooling Tower
1 Dissipation of latent heat load guaranteed during any climatic conditions.
Can not guarantee dissipation of latent heat load. The dissipation depend upon wet and dry bulb temperature.
2 Desired temperature dropped guaranteed. The temperature dropped is not constant and temperature dropped can not be achieved.
3 Evaporation and drift losses are maximum 0.80% to 1.00% on your circulation of flow
rate.
Evaporation and drift losses percentage average around 2.00% to 2.50% on circulation of water flow rate or even more depending upon
atmospheric seasonal wet and dry bulb temperature and due to wind velocity and height of Cooling Tower.
4 Less area required and limited height. Required more area and higher height.
5 Due to limited height the pump head is also required less in capacity.
Height is more. The pump head is also required in higher capacity.
6 Energy saving due to limited height, single header with 1/2” dia Spray Nozzles minimum
quantity of Nozzles required.
Energy required more to keep constant pressure for multiple water distribution header and multiple No. of Nozzles required to spray the
water to achieve breakage of water.7 Foreign particles accumulated is negligible
due to enclose body of Cooling Tower.Maximum open area. The accumulation of foreign particles is higher
percentage, due to this Air-contaminated foreign particles the efficiency of Cooling Tower decreases day by day and chance of getting clogged of your process system incase any solid structural particles come into
contact of inside of Cooling Tower.8 Cooling Tower efficiency guaranteed
throughout working performance due to mechanical draught system.
No guarantee of performance due to Natural Draught climatic condition.
Comparative Evaluation Study between FRP Induced Draught Counter Flow Cooling Tower and Natural Draught Fan Motor Less Cooling Tower ( Important)
Email: [email protected] or Phone : +91 983309483723
SQUARE SHAPED BOTTLE (ROUND) SHAPED National design Cooling Tower is ONE peace mould construction. Square shaped the uniform thickness are maintained. We provide Pyramid type dome.
No. of segments are 10 to 12 and above casing. These segments are bottled shaped and neck type dome there are always possibilities of uneven thickness of casing.
Fix header water distribution system has uniform water distribution without loosing the pressure dropped due to fixed header system. No tension bar and no Ball Bearing are required.
The round shaped Cooling Tower consists of Rotary Sprinkler assembly with Ball Bearing System and Metal Tension Bar. The Cooling Tower water always contaminated with CaCo3. Due to contaminated water the bearings are likely to get jammed, corroded, worn out faster and over a period of used the tension of spring also get loose and its likely the reduces the desired ROTATION.
Fix header water distribution system with water inlet on the top and outlet in the basin is easy to maintain within limited time.
The water distribution system is on the bottom. To maintain this system is very difficult and consuming maximum time for servicing due to Arm Pipe gravity pressure system.
F Installation of the square shaped Cooling Tower is simple and easy. The Cooling Tower without FRP Basin can be rested on RCC basin. No chances of vibration, since the entire Cooling Tower rest on RCC basin, which maintain the uniform load distribution.
Installation of Bottled shaped Cooling Tower are provided with V bar metal support and in turn the V bar metal support are rested on RCC Pillars, Leaving the entire Cooling Tower hanging above the RCC Surface floor with the result the chances of vibrations are more.
To maintain Square Shaped Cooling Tower any of your workers can do the job due to the simple system.
You need to call trained personnel of Cooling Tower Company only.
Nozzles are provided with 2.5” Diameter the turbulence effect for water spray is absolute uniform over the Fills area. No possibilities of air pocket development.
With Rotary system water is just dropping from PVC Arm pipes with thick layer of water without getting water sprayed over the fills area, the chances of air pocket developments are maximum. Due to rotation of sprinkler Arms is being obstacle for dissipation of heat load generated in the Cooling Tower area. Due to the pressure drop the load increases on the fan to dissipate the heat load generated in the Cooling Tower with the result motor get tripped off frequently.
ABS 2.5” Dia Nozzles reduces frequency of clogging. Wide spray angle.Easy lock installation and Nozzles removal need no tools.Fills placement is uniform due to the square shaped of Cooling Towers. F Fills placement is not uniform due to round shaped. To place the fills on
round shaped is uneven and to fill the gap the fills segments are cut and placed with the result its likely that air pockets develop and as a result Tower efficiency is reduced.
Maintenance is easy due to easy access through window and can be carried out even when the Tower is in operation.
Maintenance is difficult due to fixed system of all components. No window is provided. Maintenance job cannot be carried out while the Tower is in operation.
To maintain Square shaped Cooling Tower any of your maintenance personnel can carry out the maintenance job.
You need to call trained personnel from the supplier of Cooling Tower.
COMPARATIVE STUDY BETWEEN Square Shaped and Bottle or Round Shape Cooling Towers
Our Customers are based Worldwide for references in details please visit our company website…
Command – Right Click on the link + Open Hyperlink
For Domestic Customers…
http://www.nationalcoolingtowers.com/customer-domestic.htm
Email: [email protected] or Phone : +91 983309483725
For International Customers…http://www.nationalcoolingtowers.com/customer-international.htm
References ( Domestic and International)
National Cooling TowersNational Cooling Towers
Email: [email protected] or Phone : +91 983309483726
01.01. Power Plant.Power Plant.
02.02. Steel Plant.Steel Plant.
03.03. Chemical & Fertilizer industriesChemical & Fertilizer industries
04.04. Cement Industries.Cement Industries.
05.05. Pharmaceutical IndustriesPharmaceutical Industries
06.06. Machine Building Industries.Machine Building Industries.
07.07. Petroleum IndustriesPetroleum Industries
08.08. Air Condition & Refrigeration Plant.Air Condition & Refrigeration Plant.
09.09. Plastic & Rubber Industries.Plastic & Rubber Industries.
10.10. Automobile Industries.Automobile Industries.
11.11. Induction Furnaces.Induction Furnaces.
12.12. Process Plants.Process Plants.
13.13. Glass Industry.Glass Industry.
14.14. Air Compressions. Air Compressions.
15.15. Oxygen Plants.Oxygen Plants.
16.16. Breweries & Distilleries.Breweries & Distilleries.
17.17. Forgings Industries.Forgings Industries.
18.18. Paper Industries.Paper Industries.
19.19. Textile Industries.Textile Industries.
20.20. Food Processing Industries.Food Processing Industries.
21.21. Sugar Industries.Sugar Industries.
22.22. AnodizingAnodizing
23.23. D.G. Sets D.G. Sets And many more process industries…And many more process industries…
We are supplying to process industries like…We are supplying to process industries like…
Contact Information…
National Cooling TowersNational Cooling Towers
Contact Company …
Contact Person: Vishwesh Rajguru
Office: 24 & 26,Amrapali Industrial Estate, Ram Mandir Road, Goregaon (W),Mumbai-400104, Mumbai, MH,INDIA
Works: 148/2,GIDC,Umbergam,Gujarat, INDIA
Office Telephone: +91 – 22- 26765010 or 11 or 12 | Fax: +91-22-26765013
Cellular: +91 – 9833094837 and +91 7506657552
Skype: rajguru339 | Email: [email protected]
Web Portals: www.nationalcoolingtowers.com and www.nationalcoolingtower.com
27 Email: [email protected] or Phone : +91 9833094837
Email: [email protected] or Phone : +91 983309483729