1

2

COORDINATE MEASURING MACHINEStandard CNC CMMMicrocord CRYSTA-Apex S500/700/900 Series

CRYSTA-Apex S 776

CRYSTA-Apex S1200/1600/2000 Series Software for Coordinate Measuring machinesMCOSMOS

Also available :

GEOPAK (General purpose measurement program)

CAT1000P (On-/Off-line teaching program)

The CRYSTA-Apex S500/700/900 series, CNC CMMs attain high accuracy (1.7µm), high speed, and high acceleration. This series offers flexibility with a wide variety of models for various workpiece sizes.

• The CRYSTA-Apex S1200/1600/2000 Series are large-sized CNC CMMsdeveloped for supporting quality evaluation of large parts

• Measuring range up to : X 2000mm, Y 4000mm, Z 1600mm• Accuracy start from 2.3µm (S 1200 series with SP25M probe)

ModelCRYSTA-Apex S 776

Items

Measuring range

X axis 700mm

Y axis 700mm

Z axis 600mm

Maximum measuring speed 8mm/s

Drive Speed

Each axis 8 to 300mm/s (CNC Mode)

Maximum combined speed 519mm/s

0 to 80mm/s (J/S Mode : High Speed)

0 to 3mm/s (J/S Mode : Low Speed)

0.05mm/s (J/S Mode : Fine Speed)

Maximum accelerationEach axis 1333mm/s²

Maximum combined speed 2309mm/s²

Resolution 0.0001mm (0.1µm)

Guide method Air bearings on each axis

Accuracy (Using SP25M Probe) 1.7+3L/1000 (Temperature environment 1)

Model CRYSTA-Apex S 544 S 574 S 776 S 7106 S 9106 /9108 S 9166 /9168 S 9206 /9208

Measuring range

X axis 500mm 700mm 900mm

Y axis 400mm 700mm 700mm 1000mm 1000mm 1600mm 2000mm

Z axis 400mm 600mm 600mm/800mm

GEOPAK CAT1000P CAT1000S SCANPAK

MCOSMOS-1 O - - -

MCOSMOS-2 O O O -

MCOSMOS-3 O O O O

3

COORDINATE MEASURING MACHINEManual Type CMMMicrocord CRYSTA-Plus M Series

High Accuracy CNC CMMMicrocord STRATO-Apex 500/700/900/1600 Series

In-line Type CNC CMM

UltraHigh Accuracy CNC CMMMicrocord LEGEX Series

STRATO-Apex 776 MACH-3A 653

MACH Ko-ga-me

MACH-V 9106

LEGEX 774

CRYSTA-Plus M574

Stand (Option)

Manual Floating type CMMs developed in quest for high-accuracy, low-cost and easy operation. The Crysta-Plus M is suitable to measurea wide range of applications from a simple dimension to complex form

Accuracy start from (0.7+2.5L/1000)µm(S574 with SP25M Probe)

Accuracy (0.28+L/1000)µm(with MPP310Q probe)

ModelCRYSTA-Plus M574

Items

Measuring range

X axis 500mm

Y axis 700mm

Z axis 400mm

Resolution 0.0005mm (0.5µm)

Guide method Air bearings on each axis

Clamping of each axis One-touch air clamp

Fine feed of each axis Continuous fine feed over the entiremeasuring range

Accuracy*¹ at 20°C E = (3.5+4L/1000) µm

4

Eco-Fix Kit S

A kit includes a 250mm x 250mm base plate and a variety of clamping components.

• One-click programing that changes the relationship between people and precision measurement

• Indentifies tolerance information included in 3D models with Product and Manufacturing Information (PMI), defines measurement locations and creates a measurement program fully automatically

Part-programming timeReduced by up to 95% !!

Guarantee a dramatically reduceddevelopment phase and at the sametime improve product quality.

A kit includes a 500mm x 400mm base plate and a variety of clamping components.

Eco-Fix Kit L

COORDINATE MEASURING MACHINEOptional Accessories

Clamping System : Automatic measurement program generation softwareMiCAT Planner

Optional Probe :

SP25MScanning Probe

Surface Measure606Non-contact type laser probe

PH10M/10MQMotorized probe head

Probe for rougness measurement

MH20iManual probe head

TP200Compact high-accuracy touch-trigger probe

QVPQuick Vision Probe

5

OPTICAL MEASURINGProfile Projectors PJ-A3000 series

PJ-A3010F-200

PJ-H30 Series PH-3515F

PV-5110 PH-A14

Each model has a digital counter and digital readout protactor screen to facilitate dimensional and angular measurement.

• Best in class accuracy.• Bright 306mm diameter screen.• Unique head drive focusing.• Turret lens mounting.• Floating XY workstage.

• Bright 353mm diameter sceens.• Floating-type workstage.• Digital angle measurement counter.• Fiber-optic surface illumination.

• Bright large 500mm angled sceen.• Digital angle measurement counter.• Oblique surface illumination.

• Bench-top model uses a horizontal optical system.

• Maximum loading of workstage (45kg) allows the measurement of heavy workpieces.

Model PJ-A3005D-50 PJ-A3010F-100 PF-A3005F-150 PJ-A3010F-200

Projected image Inverted-reversed

Projection lensMagnification

10X (standard accessory), 20X, 50X, 100X

10X, 20X (equipped with an external half-mirror for coaxial surface illumination)

Lens mount Bayonet mount

Measuring range (XxY) 50x50mm 100x100mm 150x50mm 200x100mm

Optional Accessories

QM-Data200Data Processing unit

OPT (Optoeye)

6

OPTICAL MEASURINGMF SeriesMeasuring Microscopes

TM SeriesToolmakers’ Microscopes

MF-B2017D

TM-505B

Observation with a clear and flareless erect image along with a wide field of view Measuring accuracy : (2.2+0.02L)µm – complies with JIS B7153 method Quick-release mechanism High-magnification up to 2000x (standard 30x)

Compact universal toolmakers’ microscope that can be installed on any site

Without Z-axis scale Model No. MF-A1010D MF-A2010D MF-A2017D MF-A3017D MF-A4020D

With Z-axis scale Model No. MF-B1010D MF-B2010D MF-B2017D MF-B3017D MF-B4020D

Measurement range 100x100mm 2000x100mm 200x170mm 300x170mm 400x200mm

MF-U SeriesUniversal Measuring Microscope

Other model :

Vision UnitOptional :

Model TM-505B

Optical tube Monocular type (Vertical tilt angle: 60°)

Observation image Erect

Eyepiece Standard accessory: 15X, Options: 10X, 20X

Objective lens Standard accessory: 2X, Options: 5X, 10X

Measuring range 50x50mm

Linear measurement method Micrometer head (optional)

Applications:

PCB HDD suspension IC package Electric parts

7

VISION MEASURING SYSTEMSQV ApexCNC Vision Measuring System

QV ActiveCNC Vision Measuring System

QV Apex302

QV-L202Z1L-D

The Quick Vision series of CNC vision measuring machines are equipped with CCD cameras eliminating the need for visual alignment with a measuring microscope of projector. Automatic measuring can be easily achieved for electronic components, press molded products, resin molded products, etc.

• Space-saving new entry model, meet various needs with advanced functionality and easy operation

• Equipped with High-resolution color camera• A Model is also available equipped with a touch probe that can be used

for measuring three-dimensional objects that cannot be measured with a purely vision-based measuring system.

Model QV Apex 302 QV Apex 404 QV Apex 606

Measuring range (XxYxZ)

300x200x200mm 400x400x250mm 600x650x250mm

Resolution of scale /Scale type

0.1µm/Linear Encoder

Imaging DeviceB&W CCD (PRO)

3CCD Color (PRO3)

Accuracy

E1X, E1Y

(1.5+3L/1000)µm

E1Z (1.5+4L/1000)µm

E2XY (2+4L/1000)µm

Tracking Auto Focus device

Only PRO3 series

Model QV-L202Z1L-D QVT1-L202Z1L-D QV-L404Z1L-D QVT1-L404Z1L-D

Measuring range (X x Y x Z) “250x200x150 (250x200x118: when Z Objective 1X is used)”

“400x400x200 (400x400x168: when Z Objective 1X is used)”

Resolution 0.1µm

Scale unit Linear encoder

Color CMOS camera Yes

Accracy E1X, E1Y (2+3L/1000)µm

E1Z (3+5L/1000)µm

E2XY (2.5+4L/1000)µm

Accuracy guaranteedwith optics specified Z-objective 1.5X and 3.5X Zoom ratio

Touch-probe measuring accuracy E1X, E1Y, E1Z - (2.4+3L/1000)µm - (2.4+3L/1000)µm

Touch probe equipped models

8

VISION MEASURING SYSTEMSQS250ZCNC Vision Measuring System

Optional accessorires

QS250Z

QSL Series

QI Series

Opti-fix Kit

CNC vision measuring machine equipped with a color CCD Camera

This is a manual vision measuring machine equipped with a color CMOS camera.

A series of 2D vision measuring machines that offers high-efficiency measurement with a double telecentric optical system. QI-A models offer wide field of view (32×24mm). QI-B series (12.8x9.6mm) can offer easy dimensional measurement of micro-workpieces and workpieces with uneven surfaces.

The opti-fix system allows the quick and safe solution of very different tasks using only a few components. In case of measuring methods using reflected as well as transmitted light for measurement of cubic, rotationally symmetrical and especially flat workpieces, the use of opti-fix is a really practical solution.

Model No. QS250Z

Drive method X-, Y-, Z-axis: CNC

Total magnification*1 26X to 180X (8 steps)

Measuring range 200x250x100mm

Resolution 0.1µm

Image detection method Color CCD Camera

Measuring accuracy*2E1X, E1Y (2.5+6L/1000)µm

E1Z (5+6L/1000)µm

Model No. QI-A3017C

View field 32x24mm

Measuring range (XxY) 300x170mm

Measuring accuracy

Within screen High resolution mode: ±2µm / Normal mode: ±4µm

Repeatability within screen (±2σ)

High resolution mode: ±1µm / Normal mode: ±2µm

E1XY ±(3.5+0.02L)µm

Also available measuring range : (XxYxZ) 100x100mm 200x100mm 200x170mm 400x200mm

Also available measuring range :(XxYxZ) 200x100x150mm 400x200x150mm

Model No. QS-L3017Z/AFBDrive method Autofocus equipped, X-, Y-axis manual, Z-

axis: motor-operatedTotal magnification*1 26X to 180X (8 steps)

Measuring range 300x170x100mmResolution 0.1µm

Image detection method Color CCD Camera

Measuring accuracy*2E1X, E1Y (2.5+20L/1000)µm

E1Z (5+6L/1000)µm

9

FORM MEASUREMENTSurface Roughness Tester

SJ-210 Series

SJ-410 Series

178-039Simplified Stand

SJ-310 Series

SV-2100 series

SV-3200 series

On-site Surface Roughness Tester

Compact Surface Roughness Tester

• Skidded and skidless measurement are switchable• Achieves the performance of a dekstop type in combination

with the simplified stand and associated optional accessories

• Equipped to measure a variety of parameters.• A precision surface rouhness tester supported by a wide range of optional

accessories for a vesatile benchtop surface-analysis solution

High precision and high performance type surface roughness tester with a dedicated control unit, achieving user-friendly display and simple operation.

On-site Surface Roughness Tester

Dedicated Control Unit TypeSurface Roughness Tester

Dekstop Surface Roughness Tester

Model SJ-210 SJ-310

Measuring range

X- axis 16.0 mm

DetectorRange 360 µm (-200 µm + 160 µm) Range/Resolution

360 µm / 0.02 µm, 100 µm / 0.006 µm, 25 µm / 0.002 µm

Measuring speedWhen measuring: 0.25 mm/s, 0.5 mm/s,

0.75 mm/s When returning: 1mm/s

Measuring force/Stylus tip shape 0.75 Mn/60º, 2 µmRApplicable standards JIS 1982/ JIS 1994/ JIS 2001/ ISO

1997/ ANSI/ VDA

Assessed profile

Primary profile, Roughness profile, DF profile, Rough-ness motif profile

Primary profile, Roughness profile, DF profile, Rough-ness motif profile, Waviness motif profile

Parameter

Ra, Rc, Ry, Rz,Rq, Rt, Rmax, Rp, Rv, R3z,Rsk, Rku, Rc, Rpc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize

Ra, Rc, Ry, Rz,Rq, Rt, Rmax, Rp, Rv, R3z,Rsk, Rku, Rc, Rpc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, Lo, Rpm, tp, Htp, R, Rx, AR, W, Wx, Wte, Possible Customize

Cutoff valueλc 0.08, 0.25, 0.8, 2.5 mmλs 2.5, 8 µm

Optional Accessories :

10

FORM MEASUREMENTContour Measuring Instrument

Contracer CV-2100 SeriesContour Measuring Instrument

Contracer CV-4500 SeriesContour Measuring Instrument

Roundtest RA-1600Roundness/Cylindricity Measuring System

• Continous measurement in the vertical direction (up/down) with a double-sided conical stylus.

• The measuring force can be set in the FORMTRACEPAK software

The measurement results are shown graphically using the roundness /cylindricity analysis software (ROUNDPAK)

Contour Measuring System enabling measurement that is fast, accurate, and easy

Measuringdirection

Upward/downward measurement direction is switchable on the software

Downward (Bottom plane measurement

Upward (Top plane)measurement

Model No. CV-2100M4 CV-3200S4

Measurement rangeX-axis 100mm 100mm

Z1-axis(detector unit)

50mm 60mm

Z2-axis (column) travel range 350mm 300mm

X-axis inclination angle ±45° ±45°

ResolutionX-axis 0.1µm 0.05µm

Z1-axis 0.1µm 0.04µm

“Accuracy (20°C)”

X-axis ±(2.5+0.02L) µm ±(0.8+0.01L) µm

Z1-axis ±(2.5+|0.1H|) µm ±(1.4+|2H|/100) µm

Contracer CV-3200 SeriesContour Measuring Instrument • High-Precision Contour Measuring Instrument• Equipped with a high-precision arc scale and newly designed arm on the

Z1 axis (detector)

Optional Accessories :

218-001Cross-travel table

218-003Rotary Vise

Model No. RA-1600

Turnable

“Rotational accuracy (JIS B 7451-1997)”

Radial direction (0.02+6H/10000)µm

Axial direction (0.02+6X/10000)µm

Maximum probing diameter ø280mm

Maximum workpiece diameter ø560mm

Centering/leveling mechanism D.A.T

Maximum Probing height 300mm

X-axis travel range 165mm

11

HARDNESS TESTING MACHINESHM-200 SeriesMicro Vickers Hardness Testing Machines

HV-100 SeriesVickers Hardness Testing Machines

• Introduction of electromagnetic force generation into the loading mechanism. The latest electromagnetic force motor used in the loading mechanism enables the test force to be freely selected (see test force specifications) over the wide range of 0.4903mN to 19610mN. It is also possible to freely set the loading time and duration time.

• Newly-designed optical system. The new HM Plan series objective lenses are optimized for measuring characteristic indentation images. The lineup includes 6 types of long working distance objectives: 10X, 20X, 50X and 100X for measuring indentation images, and 2X and 5X for enabling widerange measurement around indentations.

• Vickers hardness tester have a wide application in testing metals, especially small heat-treated parts, etc.

• Four system available : System A, Basic model with touch panel operation System B, equipped with automatic indentation reading function System C, equipped with automatic indentation reading function and

automatic XY stage System D, equipped with automatic indentation reading function and

automatic XY stage, and autofocus stage

HM-210D/220A

HV-110A/120A

Functions

System A System B System C System D

Focusing Manual Manual Manual Auto

Testing action Single point Single point Programmed multi-point Programmed multi-point

Test-point positioning Manual XY stage Manual XY stage Motorized XY stage Motorized XY stage

Measuring indentations Measuring microscope Automatic (AVPAK-10/20) Automatic (AVPAK-10/20) Automatic (AVPAK-10/20)

Camera Monochrome, 300,000 pixels Color, 3 million pixels Color, 3 million pixels Color, 3 million pixels

Operating the main unit Touch Panel PC (AVPAK-10/20) PC (AVPAK-10/20) PC (AVPAK-10/20)

Model HV-110 HV-120

Applicable standards JIS B 7725, ISO 6507-2

Test Force (kgf)1 2 3 5 0,3 0,5 1 2,5

10 20 30 50 5 10 20 30

Model HM-210 HM-220Applicable standards JIS B 7725, ISO 6507-2

Test Force (gf)10 20 30 50 100 0,05 0,1 0,2 0,3 0,5 1 2 3 5 10

200 300 500 1000 - 20 30 50 100 200 300 500 1000 2000 -

Available Systems :

Optional Accessories

HV-110A/120A Touch Panel Standard Vice

12

HARDNESS TESTING MACHINESHR-100/200/300/400 SeriesRockwell Hardness Testing Machines

WiZhard HR-500 SeriesRockwell Hardness Testing Machines

HARDMATIC HH-411Rebound Type Portable Hardness Tester

HARDMATIC HH-300Durometers for Sponge, Rubber, and Plastics

This series is economy type Rockwell hardness testing machines.

• With HR-500, the hardness of even the inside wall of a pipe-shaped specimen can be tested without cutting the specimen in half.

• HR-500 can perform 3 types of hardness tests, not only Rockwell and Rockwell Superficial but also Brinell

This Portable hadrness tester is best suited for on-site hardness tests such as large molds, railroad track, and welded spots in structures.

The nose-type indenter allows internal measurement of pipe samples as well as the top surface of a flat sample

HR-522 HR-523

HR-210MR HR-320MS HR-430MR/MS

Model HR-210 MR HR-320MS HR-430MR HR-430MS

Supported hardnesses

Rockwell hardness

-Rockwell

Superficial hardness

-Rockwell

Superficial hardness

Preliminary test force (N) 98.07 29.42 98.07

98.07 29.42 98.07

Test force (N)

Superficial-

147.1 294.2 441.3

-147.1 294.2 441.3

Rockwell 588.4 980.7 1471

Standard JIS B 7726 ISO 6508-2 (ASTM E18)

Model HR-522

Type of hardness test Rockwell harness/Rockwell Superficial hardness/Brinell hardness

Standards JIS B 7726 ISO 6508-2 (ASTM E18)Preliminary test force (N) 29.42 98.07Total test force (N) 147.1 294.2 441.3Superficial

588.4 980.7 1471Rockwell

Brinell61.29 98.07 153.2 245.2 294.2306.5 612.9 980.7 1226 1839

Test force control Auto (load, duration, unload)Preliminary test force Manual (automatic brake and(handling support) automatic load sequence)

Model HH-411

Detector Impact hammer with integrated detector and carbide-ball tip

Hardness display range Leeb hardness: 1 to 999HL

“Display range (This display range varies depending on the conversion table used.)”

Vickers hardness: 43 to 950HVBrinell hardness: 20 to 894HBRockwell hardness (C scale): 19.3 to 68.2HRCRockwell hardness (B scale): 13.5 to 101.7HRBShore hardness: 13.2 to 99.3HSTensile Strength: 499 to 1996MPa

Analog type Digital type

Classification Type E Type A Type D

Measurement target

Soft rubber, sponge, felt, hard film

General rubber, soft plastic

Hard rubber, hard plastic, ebonite

13

OTHERS MEASURING SYSTEMSQM-HeightQM-Height

Linear ScaleAT-715 series

Laser Scan MicrometerLSM-902/6900

LitematicVL-50-B

KA-200 Counter

Linear Height

Application : Height measurement, inside /outside diameters, straighness, etc.

The KA-200 Counter has a lathe function, as well as standard functions Compact, light and multifunctional.

*(factory-installed option)

Non-contact laser-based measuring system, mainly for outside diameter measurement.

The Litematic is designed for measuring easily-deformed workpieces and high precision parts, with extra-low measuring force of 0.01N.

Model QMH-14” QMH-24”

Measuring range (stroke) “0-450mm (350mm)”

“0-715mm (600mm)”

Resolution (selectable) “0.001mm/ 0.005mm”

“0.001mm/ 0.005mm”

Accuracy at 20°C ± (2.4+2.1L/600) µm

Model LH-600

Measuring range 0 - 977mm

Slider stroke 600mm

Resolution (selectable) 0.0001 / 0.001 / 0.01 / 0.1mm

Accuracy at 20°C (1.1+0.6L/600) µm

Model ABS AT715

Detection method Electromagnetic induction

Minimum resolution 0.001mm to 0.01mm

Effective range 100 to 3000mm

Accuracy at 20°C “±5µm (Lo: 100 to 500mm) ±7µm (Lo: 600 to 1800mm) ±10µm (Lo: 2000 to 3000mm)”

Protection level IP67

KA-213

Model KA-212 KA-213

Number of axes to be displayed 2 axes 3 axes

“Operating temperature / humidity range”

“0 to 45°C / 20 to 80% (Operational environment) -10 to 60°C / 20 to 80% (storage environment)”

Model LSM-902/6900

Measuring range 0.1 to 25mm

Resolution 0.01 to 10µm

Repeatability ±0.05µm

Accuracy (20°C)Whole range ±0.5µm

Small range ±(0.3+0.1ΔD)µm

Model VL-50-B

Measuring range 0 to 50mm

resolution 0.01/0.1/1.0µm

Accuracy (20°C) (0.5+L/100)µm

Measuring force* 0.01N or 0.15N or 1N

14

CALIBRATION EQUIPMENTi-Checker

Gauge Block Comparator

The i-Checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads.

Manual comparator with dual gage heads

Universal Length Measuring SystemDMS 680 – Gage Calibration

For periodic inspection of gauges, reference gauges, masters and different gauges including :

- plug gauges- ring gauges- thread plug gauges- thread ring gauges- gauge blocks

- snap gauges- external micrometers- internal micrometers- bore gauges- dial indicators and electronic probes

Model i-Cheker

Measuring range 100mm

Resolution 0.02µm

Repeatability ±0.05µm

Accuracy (20°C)±(0.2+L/100)µm in vertical position

±(0.3+2L/100)µm in lateral position

Model GBCD-250

Measuring range 0.1 - 250mm

Resolution 0.00001mm (0.01µm)

Accuracy ±(0.03+0.3L/100)µm

Model DMS 680

Measuring rangeabsolute 100mm

differential (external) 680mm

“Uncertainty (U95) in the absolute range” (0.18+L/1200)µm

15

PORTABLE CMMROMER Absolute Arm with Integrated Scanner

AICON 3D Scanner

LEICA Laser Tracker Systems

The ROMER Absolute Arm with Integrated Scanner RS4 is an all-purpose portable measuring arm system designed to meet the needs of almost any measurement application, whether scanning or touch-probing.

The Leica Absolute Tracker AT403 is a portable coordinate measuring machine that allows extreme accuracy over ultra large distances.

The only Laser tracker with unique ‘4 in 1’ Solution

Leica Absolute TrackerAT403

Leica Absolute TrackerAT960

Type RA 7325SI (2.5m)* RA 7525SI (2.5m)*

Single point repeatabilty 0.049 mm 0.027 mm

Volumetric accuracy ± 0.069 mm ± 0.038 mm

Scanning system accuracy (RS4)

0.084 mm 0.063 mm

Point acquisition rate 752,000 pts/sec

Arm Weight 8.6 kg 8.9 kg

Applications :

AICON PrimeScan

*more sizes are also available

AICON StereoScan neo

System Configurations :

Laser scanning for inspection and reverse engineering solution

Hidden point measurement using B-Probe

Scanning with HP-L-20.8 Laser Scanner and Leica T-Scan 5

Robotic Guidance& Inspection

Ultra-large volume with Reflector

Probing with T-Probe

Large object measurement

6 Axis probing 7 Axis with Integrated Laser scanner (SI)

7 Axis with External Laser scanner (SE)

6 Axis with Tube probe

Model AT402 Reflector B probe

Measurement volume (ø) 320m 20m

Uxyz Coordinate Uncer-tainty

+/- 15 µm + 6 µm/m +/- 0.2mm

Portable 3D probing (GD&T measurement)

16

KAWAN LAMA CALIBRATION LABORATORY

CALIBRATION TRAINING

The calibration is a process to determine the measurement accuracy value on a conventional measuring instrument by comparing the measurement results with national and international measurement standards. The benefits are to make sure the measuring instrument is in good condition, brings an accurate measurement and ready for use. Since January 2004, PT Kawan Lama Sejahtera Calibration Laboratory provides calibration services for various measuring instruments. Accredited by Komite Akreditasi Nasional (KAN) LK-066-IND, calibration quality at Kawan Lama Calibration Laboratory is guaranteed and will be done in Accurate, Fast, and Right.

Kawan Lama Calibration Laboratory offers a calibration services ranging from check and maintenance service to identify the condition of measuring instrument, and repair service if there is damage. We also provide spare part provision service if part replacement is needed and calibration contract service which manages the calibration schedule of the measuring instrument regularly to provide the best performance.

a. Training purpose• Perform calibrations of measuring instruments according to methods and

procedures on rightly and accurately way.• Eliminates measurement uncertainties in reporting calibration results.• Applying calibration based on production needs.

b. Required for?This training is required for QA / QC personnel, test engineers, supervisors, and production managers. It’s also beneficial for machine operators in the production process, and employees who do the production design.

c. The trainersThe trainers are senior experienced laboratory instructors in the field of dimensional calibration (Mitutoyo), force (IMADA), torque (FACOM) and hardness (Mitutoyo). They also have calibration certification from trusted national and international institutions, as well as a permanent instructor in calibration laboratory accredited by KAN (ISO 17025).

d. Training methods and facilityThe training methods of the calibration are based on JIS (Japan Industrial Standard), and ASTM (American Society for Testing and Materials) so that it can be directly applied to various industrial fields. The training location is in Jakarta and will be implemented at a real calibration laboratory. Participants will be provided with training module, samples of calibration record and calibration results.

DIMENSION/LENGTH• caliper• micrometer• height gauge• bore gauge• dial indicator• dial test indicator

• gauge block• profile projector• microscope• thickness gauge• pin/plug gages, setting/ring gages• plug (ring) thread gage

FORCE• push pull gaugeTORQUE WRENCH• torque and screwdriver wrenchTEMPERATURE• torque wrench

MASS• balance/weighing unitHARDNESS• rockwell (HRB, HRC)• rockwell superficial (HR30T, HR30N)• rubber hardness (shore)

Accurate : The calibration process is done punctiliously and accurate to ensure the best results.

Fast : The calibration process is done in a fast time.Right : The calibration process uses the best standard calibration

method that can meet the needs.

BONTANGTel. : 0811 581 4591CIKARANGTel. : (021) 8984-5858CILEGONTel. : (0254) 387-987LAMPUNGTel. : (0721) 474-480MALANGTel. : (0341) 321-328

SURABAYA (Juanda)Tel. : (031) 868-8328TANJUNG MORAWATel. : (061) 794-1328YOGYAKARTATel. : (0274) 642-9098

MEDANTel. : (061) 452-7269PALEMBANGTel. : (0711) 351-198PEKANBARUTel. : (0761) 282-98SAMARINDATel. : (0541) 410-0637SEMARANGTel. : (024) 355-8788

Kawan Lama Industria lSolution BalikpapanTel. : (0542) 870-3946Download our app! kl

s/p&

a.45

6/5k

/mt.m

aj/n

in.g

ram

/01.

18