core 400 sx - alwusa.com
TRANSCRIPT
Source Xicato XTM LED module - up to 4000 lumens
CCT 2700K, 3000K, 3500K or 4000K
Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 40K to 70K, Duv +/- .001
CRI (Ra)
Driver / Location
Input Voltage
Reflector
Material
Finish
Weight
Location
Approvals
L80 Life
Warranty
IES Files
Modifications
83 or 98
Included / Remote mount or deep canopy options
Up to 48 watts max, depending on LED module / driver
100 to 277VAC, phase dimmable versions are 120VAC only
11˚, 25˚, 41˚, 51˚, or 83˚ - field replaceable without tools
CNC machined aluminum with stainless steel hardware
Powder coat - TGIC polyester for exterior and interior use
7 lb. [3.2 kg]
Listed for Wet & Damp locations
ETL Listed to UL 1598, 2108, 8750 and CSA C22.2# 9 & #250.0
> 50,000 hours at 80% lumen maintenance based on IESNA LM-80-08
Lifetime Limited Warranty - see warranty for details
LM-79-08 IES files available
Any modification or customization is possible - consult factory
SPECIFICATIONS
PROJECT
Power
ORDERING LOGIC
Driver MountingModel Location Dimming Location Output CRI * C.C.T. Reflector Shell Options
C4SM - - - -R=Remote N=None D=Damp 07=700 lm 83=83 27=2700K 11=11° ** XXD=Deep P=Phase W=Wet 10=950 lm 98=98* 30=3000K 25=25° (see chart on page 4) Canopy V=0-10V 13=1300 lm 35=3500K 41=41°
Z=Other 20=2000 lm 40=4000K 51=51° ZZ=Custom30=3000 lm 83=83° **40=4000 lm
** Not available with wet location
Example Part Number: C4SM-RND-20832741-S3CORE 400 SX Surface Mount - Remote Driver, No Dimming, Damp Location - 2000 lm, 83 CRI, 2700K, 41° Reflector - S3 Red Shell
* 98 CRI not available in 4000 lm
Job
Type
Part #
Notes
LOCATIONWET!"# DIMMABLEI N D O O R
OUTDOOR
Dimming 0-10V or phase dimming to 10% standard; DALI, DMX and 1% dimming available
CORE 400 SXSURFACE MOUNT
1A 1035 22nd Avenue, Unit 1 ∙ Oakland, CA 94606 P 510.489.2530 E [email protected] W alwusa.com
rev 210121
Options highlighted in green = QuickShip qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones highlighted green. NOTE: Maximum of 100 cylinders of Quickship-eligible product per order.
Order Code V = 0-10V dimming to 10%LES1 CRI Lumens2, 3 Wattage4 (W) Efficacy5 (lm/W) Order Code P = Phase dimming to 10%
700 5.6 129 Compatible with both forward and950 8.2 118 reverse phase dimmers
1300 11.7 111 eldoLED 0-10V, DALI, or DMX dimming to 0%2000 19.5 102 Lutron Hi-lume™ A-series, EcoSystem or3000 29.3 102 forward phase dimming to 1%4000 39.1 102700 7.4 97950 10.9 89 * All LED drivers must be mounted in a deep canopy or remote
1300 15.6 83 * Standard LED drivers are suitable for Wet Location2000 26.4 76 * Optional LED drivers are suitable for Damp Location3000 34.1 88 * For EM applications:
All LED drivers may be used with 3rd party inverter style systems1 LES: Light Emitting Surface diameter2 ±10%3 Source lumens - see photometrics on page 3 for LOR to calculate delivered lumens4 Maximum luminaire wattage including LED driver = LED wattage x 1.25 Higher efficacies are available via lower drive currents - consult factory
Ra = 83 ± 3
ReflectorOption
LED SpecificationsStandard LED Drivers*
(included in base price)
Ra = 98R9 90
R15 95
11°, 25°, 41°,51° & 83° 19mm Lutron Hi-lume™ 5-series, EcoSystem dimming to 5%
Optional LED Drivers*
LED OPTIONS
DIMENSIONS
CONTROL OPTIONS
Not to scale, dimensions are nominalConsult factory for CAD drawings
All canopies fit standard 3.5" and 4"round and octagonal junction boxes
Optional deep canopy forcanopy mounted LED drivers
Order Code = DDiameter depends on LED driver size
5" or 6"
5"
2.4"
0.3"
6.9"
6"
Standard shallow canopy for remotemounted LED drivers
2A 1035 22nd Avenue, Unit 1 ∙ Oakland, CA 94606 P 510.489.2530 E [email protected] W alwusa.com
CORE 400 SXSURFACE MOUNT
rev 210121
PHOTOMETRICS
Beam Shaping Options
Add the order code shown below to the options box at the end of the part number:
Order Code Description -HL Honeycomb Louver -DF Diffusion Lens -SF Satin finish on any standard reflector -LS Linear Spread Lens (60° x 1°) -WW Wall Wash Lens (shifts beam 20° from vertical)
Beam Angle
Order Code (3000lm) (3000lm)
Cone Diagram(3000lm)
Description
11° 11
0
7375
14750
22125
29500 0 30
5900
60
11800
90
17700
23600
29500
5'
Illuminance at Center
1178 fc
Beam Diameter
1.0'
10' 295 fc 1.9'
15' 131 fc 2.9'
20' 74 fc 3.8'
CBCP = 29,547 cdBeam Angle = 11°
Beam = full width @ 50%Field = full width @ 90%
25° 25
0
1950
3900
5850
7800 0 30
1560
60
3120
90
4680
6240
7800
5'
Illuminance at Center
311 fc
Beam Diameter
2.2'
10' 78 fc 4.5'
15' 35 fc 6.7'
20' 19 fc 8.9'
CBCP = 7,785 cdBeam Angle = 25°
Beam = full width @ 50%Field = full width @ 90%
41° 41
0
1300
2600
3900
5200 0 30
1040
60
2080
90
3120
4160
5200
5'
Illuminance at Center
205 fc
Beam Diameter
3.7'
10' 51 fc 7.4'
15' 23 fc 11.1'
20' 13 fc 14.8'
CBCP = 5,127 cdBeam Angle = 41°
Beam = full width @ 50%Field = full width @ 90%
51° 51
0
900
1800
2700
3600 0 30
720
60
1440
90
2160
2880
3600
5'
Illuminance at Center
143 fc
Beam Diameter
4.8'
10' 36 fc 9.6'
15' 16 fc 14.4'
20' 9 fc 19.1'
CBCP = 3,564 cdBeam Angle = 51°
Beam = full width @ 50%Field = full width @ 90%
83°
Linear Spread Lens (60° x 1°)
83
0
475
950
1425
1900 0 30
380
60
760
90
1140
1520
1900
5'
Illuminance at Center
72 fc
Beam Diameter
8.9'
10' 18 fc 17.8'
15' 8 fc 26.7'
20' 5 fc 35.6'
CBCP = 1,802 cdBeam Angle = 83°
Beam = full width @ 50%Field = full width @ 90%
LM-79-08 IES files available
Field Angle = 59°
LOR = 87.5 %
Field Angle = 23°
LOR = 89.1 %
Field Angle = 62°
LOR = 82.4 %
Field Angle = 76°
LOR = 83.0 %
Field Angle = 96°
LOR = 84.8 %
Intensity Plot (cd) Polar Plot (cd)
3A 1035 22nd Avenue, Unit 1 ∙ Oakland, CA 94606 P 510.489.2530 E [email protected] W alwusa.com
CORE 400 SXSURFACE MOUNT
rev 210121
SatinAnodized
EffectPowder Coat
BasicPowder Coat
Aluminum
Custom CCM _ _ _ _ Custom powder coat color matchingis available - consult ALW.Premium setup fee applies.
RAL _ _ _ _Most RAL Classic Colors (80-95% Gloss) are available for powder coat - consult ALW. Minimum setup fee applies.See: alwusa.com/finishes for more information
SpecialOrder
CAT _ _ _ _The complete range of powder coatcolors from the Tiger Drylac and TCI catalogs are available - consult ALW. Minimum setup fee applies.
MetallicPowder Coat
CSClear Silver
GWGloss White
BABrushed AluminumCost adder applies.
SGSilver Gray
GOOrange(RAL 2003)
GlossPowder Coat(80-95% Gloss)
OBOil-RubbedBronze
SWSatin WhiteAWAntimicrobial option
CGCharcoalGray
GRRed(RAL 3020)
DBDark Bronze
TWTexturedMatte White
CUCopper
GMMagenta(RAL 4010)
SBSatin Black
TBTexturedMatte Black
BRBrass
GBBlue(RAL 5015)
Printed or on-screen colors are only approximations - consult actual Color Chip Set before specifyingNote: An individual setup fee will apply to each unique Special Order/Custom Finish per purchase order.(ex: RAL 5023 and RAL 2008 are specified for multiple line items on a purchase orer. 2x setup fees will apply)
COLOR OPTIONS
4A 1035 22nd Avenue, Unit 1 ∙ Oakland, CA 94606 P 510.489.2530 E [email protected] W alwusa.com
CORE 400 SXSURFACE MOUNT
rev 210121
Options highlighted in green = QuickShip qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones highlighted green. NOTE: Maximum of 100 cylinders of Quickship-eligible product per order. For additional quickship eligible finishes, contact ALW.
5A 1035 22nd Avenue, Unit 1 ∙ Oakland, CA 94606 P 510.489.2530 E [email protected] W alwusa.com
CORE 400 SXSURFACE MOUNT
rev 210121